๐ŸŽฏ T-Dongle-C5 ๐ŸŒ

## ๐ŸŒˆIntroduction >- This document was constructed and compiled by PlatformIO. | board | MCU | WIFI | BLE | Display | storage | Flash | PSRAM | RGB(LED) | Button | USB | | ----------- | ----------- | ------ | ------- | ------------------------ | ------- | ----- | ----- | -------- | ------ | ----- | | T-Dongle-C5 | ESP32-C5HR8 | WIFI 6 | BLE 5.0 | ST7735-80*160(0.96 inch) | SD | 16MB | 8MB | APA102 | Boot | USB-A | ## ๐Ÿ›ตDirectory ``` T-Dongle-C5 โ”œโ”€โ”€ board : T-Dongle-C5 board support โ”œโ”€โ”€ Examples | โ”œโ”€โ”€ Factory : T-Dongle-C5 Factory Exampel | โ”œโ”€โ”€ SDCard : SD card Exampel | โ”œโ”€โ”€ LCD : SPI LCD demo | โ”œโ”€โ”€ LED : LED demo | โ”œโ”€โ”€ wifi_serial : TCP URAT โ”œโ”€โ”€ Hardware โ”‚ โ”œโ”€โ”€ T-Dongle-C5.pdf : T-Dongle-C5 hardware design โ”œโ”€โ”€ firmware ๏ผšT-Dongle-C5 firmware โ”œโ”€โ”€ firmware_bin ๏ผšThe bin file is compiled and generated by extra_script.py. โ”œโ”€โ”€ doc ๏ผšESP32C5 datasheet and peripheral datasheet | โ”œโ”€โ”€ readme.md ``` ## ๐ŸšฉPinout Diagram | GPIO | LCD | LED | SD | UART | Button | USB | | ------- | -------- | ------ | ------ | -------- | ------ | ------ | | GPIO_2 | LCD_MOSI | | SD_CMD | | | | | GPIO_4 | | LED_CI | | | | | | GPIO_5 | | LED_DI | | | | | | GPIO_7 | LCD_MISO | | SD_D0 | | | | | GPIO_6 | LCD_SCK | | SD_CLK | | | | | GPIO_10 | LCD_CS | | | | | | | GPIO_3 | LCD_RS | | | | | | | GPIO_0 | LCD_BL | | | | | | | GPIO_1 | LCD_RST | | | | | | | GPIO_23 | | | SD_CS | | | | | GPIO_28 | | | | | BOOT | | | GPIO_11 | | | | UART0_TX | | | | GPIO_12 | | | | UART0_RX | | | | GPIO_13 | | | | | | USB_DN | | GPIO_14 | | | | | | USB_DP | ## โš™๏ธQuick Start > Arduino: >- Copy all files in the lib folder to `\Arduino\libraries` >- Select the settings as shown. Note that the FLASH size partition and size may be modified depending on the board. ![alt text](image/image.png) > ESP-IDF: >- The IDF installation method is also inconsistent depending on the system, it is >-recommended to refer to the [official manual](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/get-started/index.html) for installation > PlatfromIO: > - PlatformIO plug-in installation: Click on the extension on the left column -> search platformIO -> install the first plug-in > - Click platformio.ini file -> seclect example -> bulid -> upload ![alt text](image/image-1.png) | software | supported | version | | ---------- | --------- | ---------------- | | ESP-IDF | โœ… | v5.5 or higher | | Arduino | โœ… | v3.3.0 or higher | ## ๐Ÿ’ชFirmware >- Before burning, press and hold the BOOT button and insert it into the computer. This will enter the burning and download mode. Once the serial port is recognized, open the burning tool. >- Firmware:`firmware/T-Dongle-C5-Factory_V1.4_0616.bin` >- Tools: `tools/flash_download_tool` >- chip: Select ESP32C5 USB download >- Use the `esp_tools` software with version 3.9.8 or above to burn the firmware. >- ![boot](image/boot.png) >- ![burn_chip](image/burn_chip.png) >- ![firmware](image/firmware.png) ## ๐Ÿš€FAQ ### 1.How to operate when using an external antenna? >- ![RF_ipex_user](image/RF_ipex_user.png)