(kicad_pcb (version 20260206) (generator "petvest_gen") (generator_version "1.0")
	(general (thickness 1.6) (legacy_teardrops no))
	(paper "A4")
	(title_block (title "PetVest 主控Hub板") (date "2026-11-07") (rev "A"))
	(layers
		(0 "F.Cu" signal)
		(31 "B.Cu" signal)
		(37 "F.CrtYd" user)
		(39 "F.Fab" user)
		(35 "F.Paste" user)
		(33 "F.Mask" user)
		(36 "B.SilkS" user "B.Silkscreen")
		(34 "B.Paste" user)
		(32 "B.Mask" user)
		(5 "F.SilkS" user "F.Silkscreen")
		(44 "Edge.Cuts" user)
		(40 "F.Adhes" user "F.Adhesive")
		(41 "B.Adhes" user "B.Adhesive")
		(43 "F.CrtYd" user)
		(42 "B.CrtYd" user)
	)
	(setup (pad_to_mask_clearance 0) (allow_soldermask_bridges_in_footprints no))
	(net 1 "IMU5_SDA")
	(net 2 "VSW")
	(net 3 "I2S_AMP_BCLK")
	(net 4 "NET_L2")
	(net 5 "I2C_SDA")
	(net 6 "I2C_SCL")
	(net 7 "IMU_INT3")
	(net 8 "HR_INT")
	(net 9 "I2S_MIC_SD")
	(net 10 "GND")
	(net 11 "NET_SPKN")
	(net 12 "+1V8")
	(net 13 "IMU1_SCL")
	(net 14 "I2S_MIC_WS")
	(net 15 "IMU4_SDA")
	(net 16 "NET_CC2")
	(net 17 "IMU3_SCL")
	(net 18 "SPARE_SDA")
	(net 19 "IMU_INT6")
	(net 20 "NET_PROG")
	(net 21 "IMU4_SCL")
	(net 22 "NET_BOOT")
	(net 23 "NET_LED47")
	(net 24 "+BATT")
	(net 25 "USB_DP_C")
	(net 26 "NET_LCHG_A")
	(net 27 "I2S_AMP_LRC")
	(net 28 "NET_BATADC")
	(net 29 "NET_SPKP")
	(net 30 "NET_CHRG")
	(net 31 "IMU2_SCL")
	(net 32 "IMU_INT2")
	(net 33 "I2S_MIC_SCK")
	(net 34 "USB_DM")
	(net 35 "NET_LED_A")
	(net 36 "GPS_TXD")
	(net 37 "NET_STDY")
	(net 38 "IMU_INT1")
	(net 39 "VBUS_F")
	(net 40 "IMU2_SDA")
	(net 41 "NET_VAUX")
	(net 42 "NET_CC1")
	(net 43 "+3V3")
	(net 44 "IMU6_SCL")
	(net 45 "IMU1_SDA")
	(net 46 "IMU6_SDA")
	(net 47 "IMU_INT4")
	(net 48 "NET_MUXRST")
	(net 49 "USB_DM_C")
	(net 50 "USB_DP")
	(net 51 "VBUS")
	(net 52 "GPS_RXD")
	(net 53 "NET_L1")
	(net 54 "IMU5_SCL")
	(net 55 "SPARE_SCL")
	(net 56 "IMU_INT5")
	(net 57 "RGB_DIN")
	(net 58 "NET_EN")
	(net 59 "NET_LSTD_A")
	(net 60 "I2S_AMP_DIN")
	(net 61 "DEBUG_RX")
	(net 62 "IMU3_SDA")
	(net 63 "NET_AMPSD")
	(net 64 "DEBUG_TX")
	(gr_rect (start 0 0) (end 62.0 42.0) (stroke (width 0.1) (type solid)) (fill no) (layer "Edge.Cuts") (uuid "50c7b3d4-520e-5cfc-a3bb-5cd01abbcc91"))
	(footprint "MountingHole:MountingHole_2.7mm"
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(at 3.5 3.5 0)
		(descr "Mounting Hole 2.7mm, no annular, generated by kicad-footprint-generator mountinghole.py")
		(tags "mountinghole")
		(property "Reference" "H"
			(at 0 -3.65 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "MountingHole_2.7mm"
			(at 0 3.65 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "mounting_hardware/mounting_hole"
			(at 0 0 0)
			(layer "F.SilkS")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr exclude_from_pos_files exclude_from_bom)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_circle
			(center 0 0)
			(end 2.7 0)
			(stroke
				(width 0.15)
				(type solid)
			)
			(fill no)
			(layer "Cmts.User")
		)
		(fp_circle
			(center 0 0)
			(end 2.95 0)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 2.7 2.7)
			(drill 2.7)
			(layers "*.Cu" "*.Mask")
		)
		(embedded_fonts no)
)
	(footprint "MountingHole:MountingHole_2.7mm"
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(at 58.5 3.5 0)
		(descr "Mounting Hole 2.7mm, no annular, generated by kicad-footprint-generator mountinghole.py")
		(tags "mountinghole")
		(property "Reference" "H"
			(at 0 -3.65 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "MountingHole_2.7mm"
			(at 0 3.65 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "mounting_hardware/mounting_hole"
			(at 0 0 0)
			(layer "F.SilkS")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr exclude_from_pos_files exclude_from_bom)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_circle
			(center 0 0)
			(end 2.7 0)
			(stroke
				(width 0.15)
				(type solid)
			)
			(fill no)
			(layer "Cmts.User")
		)
		(fp_circle
			(center 0 0)
			(end 2.95 0)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 2.7 2.7)
			(drill 2.7)
			(layers "*.Cu" "*.Mask")
		)
		(embedded_fonts no)
)
	(footprint "MountingHole:MountingHole_2.7mm"
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(at 3.5 39.5 0)
		(descr "Mounting Hole 2.7mm, no annular, generated by kicad-footprint-generator mountinghole.py")
		(tags "mountinghole")
		(property "Reference" "H"
			(at 0 -3.65 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "MountingHole_2.7mm"
			(at 0 3.65 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "mounting_hardware/mounting_hole"
			(at 0 0 0)
			(layer "F.SilkS")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr exclude_from_pos_files exclude_from_bom)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_circle
			(center 0 0)
			(end 2.7 0)
			(stroke
				(width 0.15)
				(type solid)
			)
			(fill no)
			(layer "Cmts.User")
		)
		(fp_circle
			(center 0 0)
			(end 2.95 0)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 2.7 2.7)
			(drill 2.7)
			(layers "*.Cu" "*.Mask")
		)
		(embedded_fonts no)
)
	(footprint "MountingHole:MountingHole_2.7mm"
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(at 59.2 36.5 0)
		(descr "Mounting Hole 2.7mm, no annular, generated by kicad-footprint-generator mountinghole.py")
		(tags "mountinghole")
		(property "Reference" "H"
			(at 0 -3.65 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "MountingHole_2.7mm"
			(at 0 3.65 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "mounting_hardware/mounting_hole"
			(at 0 0 0)
			(layer "F.SilkS")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr exclude_from_pos_files exclude_from_bom)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_circle
			(center 0 0)
			(end 2.7 0)
			(stroke
				(width 0.15)
				(type solid)
			)
			(fill no)
			(layer "Cmts.User")
		)
		(fp_circle
			(center 0 0)
			(end 2.95 0)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 2.7 2.7)
			(drill 2.7)
			(layers "*.Cu" "*.Mask")
		)
		(embedded_fonts no)
)
	(footprint "Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12"
	(version 20260206)
	(generator "pcbnew")
	(generator_version "10.0")
	(layer "F.Cu")
	(at 4.7 14.0 90)
	(uuid "770d22a8-1821-5aea-a68c-034bcf85027d")
	(descr "USB Type-C receptacle for USB 2.0 and PD, http://www.krhro.com/uploads/soft/180320/1-1P320120243.pdf")
	(tags "usb usb-c 2.0 pd")
	(property "Reference" "J1"
		(at 0 -5.645 0)
		(layer "F.SilkS")
		(uuid "a144ce76-cc23-44fb-8108-bf18e64a4c3d")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "USB-C 16P"
		(at 0 5.1 0)
		(layer "F.Fab")
		(uuid "0ca5cf76-e951-4e58-a402-14dc42a864b3")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Datasheet" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "2b954944-56ad-4032-bee5-bd7186324aef")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(property "Description" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "9d55800b-f601-4afa-9fad-eee332310ae0")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -4.7 -1.9)
		(end -4.7 0.1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "9513b845-7495-41b4-99da-c8a12a5f4b76")
	)
	(fp_line
		(start -4.7 2)
		(end -4.7 3.9)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "7abeef8d-db92-4e88-b3d6-7c7e4efa4938")
	)
	(fp_line
		(start -4.7 3.9)
		(end 4.7 3.9)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "f40329f5-4d09-479c-8f81-97fdcd13c5cd")
	)
	(fp_line
		(start 4.7 -1.9)
		(end 4.7 0.1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "177e7db1-b916-4e65-ace8-532e6e1f85db")
	)
	(fp_line
		(start 4.7 2)
		(end 4.7 3.9)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "bd122681-67e3-4c23-b564-57e345c7c818")
	)
	(fp_line
		(start -5.32 -5.27)
		(end -5.32 4.15)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "d939342c-cab3-429e-ad71-738d34173267")
	)
	(fp_line
		(start -5.32 -5.27)
		(end 5.32 -5.27)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "3215d7dd-650e-4c6a-86e5-bc970c8d9c6c")
	)
	(fp_line
		(start -5.32 4.15)
		(end 5.32 4.15)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "c38cb6a1-740b-49d2-b49e-f8ce3382fe48")
	)
	(fp_line
		(start 5.32 -5.27)
		(end 5.32 4.15)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "3b610068-7f90-495b-a772-9a6b7e6a55c9")
	)
	(fp_line
		(start -4.47 -3.65)
		(end -4.47 3.65)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "47095738-bb75-4e91-802c-f92840c443b3")
	)
	(fp_line
		(start -4.47 -3.65)
		(end 4.47 -3.65)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "6142486d-ba8a-4b38-a6ca-d52b6a020ef2")
	)
	(fp_line
		(start -4.47 3.65)
		(end 4.47 3.65)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "84966fee-864e-4cdc-8345-c62bca33694f")
	)
	(fp_line
		(start 4.47 -3.65)
		(end 4.47 3.65)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "f6b3cf35-21be-4e1f-8c99-3404cfc41d3f")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(uuid "9189a13a-f353-4ddb-8257-370c54398cd0")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "" np_thru_hole circle
		(at -2.89 -2.6)
		(size 0.65 0.65)
		(drill 0.65)
		(layers "*.Cu" "*.Mask")
		(uuid "e13b4b37-788a-41d5-87ca-c66be43ee32d")
	)
	(pad "" np_thru_hole circle
		(at 2.89 -2.6)
		(size 0.65 0.65)
		(drill 0.65)
		(layers "*.Cu" "*.Mask")
		(uuid "4558f1f0-2fa3-46e1-a220-284fa2707bb5")
	)
	(pad "A1" smd roundrect
		(at -3.25 -4.045)
		(size 0.6 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
		(uuid "245fae56-8b58-4bd8-bbf1-36624dc3fa3e")
	)
	(pad "A4" smd roundrect
		(at -2.45 -4.045)
		(size 0.6 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 51 "VBUS")
		(roundrect_rratio 0.25)
		(uuid "412cd3c1-0d89-4ca6-be0e-1b17d8471f5a")
	)
	(pad "A5" smd roundrect
		(at -1.25 -4.045)
		(size 0.3 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 42 "NET_CC1")
		(roundrect_rratio 0.25)
		(uuid "93953890-acba-456b-bb6d-b1e79179ffa0")
	)
	(pad "A6" smd roundrect
		(at -0.25 -4.045)
		(size 0.3 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 25 "USB_DP_C")
		(roundrect_rratio 0.25)
		(uuid "6a642da3-3122-4031-a6e9-68498b0f5bb9")
	)
	(pad "A7" smd roundrect
		(at 0.25 -4.045)
		(size 0.3 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 49 "USB_DM_C")
		(roundrect_rratio 0.25)
		(uuid "01b9b129-063c-4bae-b620-9610006254cb")
	)
	(pad "A8" smd roundrect
		(at 1.25 -4.045)
		(size 0.3 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(uuid "46ecdf8a-0917-4257-a388-b77e7451dc23")
	)
	(pad "A9" smd roundrect
		(at 2.45 -4.045)
		(size 0.6 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 51 "VBUS")
		(roundrect_rratio 0.25)
		(uuid "a35f3da7-7460-43f1-99b7-9ed521817778")
	)
	(pad "A12" smd roundrect
		(at 3.25 -4.045)
		(size 0.6 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
		(uuid "3795b0f1-50f9-473e-9d26-381fc08b3c2d")
	)
	(pad "B1" smd roundrect
		(at 3.25 -4.045)
		(size 0.6 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
		(uuid "c9e8a0db-2a60-41d9-b783-6c4e64a8fb5d")
	)
	(pad "B4" smd roundrect
		(at 2.45 -4.045)
		(size 0.6 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 51 "VBUS")
		(roundrect_rratio 0.25)
		(uuid "51b193ee-c8c2-4ee6-8d8c-14b79a2c1520")
	)
	(pad "B5" smd roundrect
		(at 1.75 -4.045)
		(size 0.3 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 16 "NET_CC2")
		(roundrect_rratio 0.25)
		(uuid "45f8f791-f545-4341-9848-fb81a03703a6")
	)
	(pad "B6" smd roundrect
		(at 0.75 -4.045)
		(size 0.3 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 25 "USB_DP_C")
		(roundrect_rratio 0.25)
		(uuid "efc27675-62a0-44de-8210-29c2190dd309")
	)
	(pad "B7" smd roundrect
		(at -0.75 -4.045)
		(size 0.3 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 49 "USB_DM_C")
		(roundrect_rratio 0.25)
		(uuid "96622dcb-c1cc-4b7d-8455-8cd0ce1e5c34")
	)
	(pad "B8" smd roundrect
		(at -1.75 -4.045)
		(size 0.3 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(uuid "09bb6e12-e7e5-4788-b43e-4cc6c50a557a")
	)
	(pad "B9" smd roundrect
		(at -2.45 -4.045)
		(size 0.6 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 51 "VBUS")
		(roundrect_rratio 0.25)
		(uuid "70539c09-2020-4a42-a156-43d1513170d0")
	)
	(pad "B12" smd roundrect
		(at -3.25 -4.045)
		(size 0.6 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
		(uuid "eda87c04-3a59-4e2c-a9bd-f59ed31672aa")
	)
	(pad "SH" thru_hole oval
		(at -4.32 -3.13)
		(size 1 2.1)
		(drill oval 0.6 1.7)
		(property pad_prop_mechanical)
		(layers "*.Cu" "*.Mask")
			(net 10 "GND")
		(remove_unused_layers no)
		(uuid "69c3dc88-a37e-49ef-ae4d-497d3191ad5b")
	)
	(pad "SH" thru_hole oval
		(at -4.32 1.05)
		(size 1 1.6)
		(drill oval 0.6 1.2)
		(property pad_prop_mechanical)
		(layers "*.Cu" "*.Mask")
			(net 10 "GND")
		(remove_unused_layers no)
		(uuid "5991ca6f-c5c1-4692-8fe9-cf4b7ca50c4b")
	)
	(pad "SH" thru_hole oval
		(at 4.32 -3.13)
		(size 1 2.1)
		(drill oval 0.6 1.7)
		(property pad_prop_mechanical)
		(layers "*.Cu" "*.Mask")
			(net 10 "GND")
		(remove_unused_layers no)
		(uuid "af5ae63f-ef36-487e-a6b8-831b84890f25")
	)
	(pad "SH" thru_hole oval
		(at 4.32 1.05)
		(size 1 1.6)
		(drill oval 0.6 1.2)
		(property pad_prop_mechanical)
		(layers "*.Cu" "*.Mask")
			(net 10 "GND")
		(remove_unused_layers no)
		(uuid "e783dde5-f762-4528-9b55-9220820b0b1c")
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_USB.3dshapes/USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Button_Switch_SMD:SW_SPDT_PCM12"
	(version 20260206)
	(generator "pcbnew")
	(generator_version "10.0")
	(layer "F.Cu")
	(at 5.0 20.5 90)
	(uuid "6b7d2b95-0fee-534c-bc05-b927e0e245e4")
	(descr "Ultraminiature Surface Mount Slide Switch, right-angle, https://www.ckswitches.com/media/1424/pcm.pdf")
	(property "Reference" "SW1"
		(at 0 -3.2 0)
		(layer "F.SilkS")
		(uuid "e2ffad52-2f15-47ff-8782-46a40ce175b2")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "POWER"
		(at 0 4.25 0)
		(layer "F.Fab")
		(uuid "7dd19bae-36e5-495c-a883-ee2632c34a8f")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Datasheet" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "9747ffd4-5043-4d1e-834c-3cb7727819c4")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(property "Description" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "0febd6b9-361a-4fb3-b17c-8fb3fd2fb96e")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -3.45 -0.07)
		(end -3.45 0.72)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "8434d284-ea83-412d-b283-c980a10fac8c")
	)
	(fp_line
		(start -2.85 1.73)
		(end 2.85 1.73)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "4bca8a18-c19b-4590-9b4f-a75036961581")
	)
	(fp_line
		(start -1.6 -1.12)
		(end 0.1 -1.12)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "d675c368-4ad3-49c8-8b8d-0b58032dca14")
	)
	(fp_line
		(start -1.4 1.73)
		(end -1.4 3.02)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "0126ca41-034d-40ed-a64c-e258f3a44265")
	)
	(fp_line
		(start -1.4 3.02)
		(end -1.2 3.23)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "cc241ff4-6b59-459b-ad44-ef9ab903cceb")
	)
	(fp_line
		(start -1.2 3.23)
		(end -0.3 3.23)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "6812c738-3616-4fd3-91f6-2969df039f93")
	)
	(fp_line
		(start -0.1 3.02)
		(end -0.3 3.23)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "90bf68d2-8f02-4a9b-aac8-70be21830a81")
	)
	(fp_line
		(start -0.1 3.02)
		(end -0.1 1.73)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "c124df76-ffa6-43bb-b616-59357844ffff")
	)
	(fp_line
		(start 1.4 -1.12)
		(end 1.6 -1.12)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "499cb03a-5a2f-450f-bdcf-a17ea3db5efe")
	)
	(fp_line
		(start 3.45 0.72)
		(end 3.45 -0.07)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "06013258-4a4a-466f-9c8f-ae1946caedca")
	)
	(fp_line
		(start -4.4 -2.45)
		(end 4.4 -2.45)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "d409764e-44a7-49b4-bf18-f9596d466e34")
	)
	(fp_line
		(start -4.4 2.1)
		(end -4.4 -2.45)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "0bf89cd8-46fd-404e-899e-8b50b2d0eab1")
	)
	(fp_line
		(start -1.65 2.1)
		(end -4.4 2.1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "eb20562a-0fcf-442c-9e32-2e9e480b468b")
	)
	(fp_line
		(start -1.65 3.4)
		(end -1.65 2.1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "b3e1e296-fe42-4095-8000-b5913df843ff")
	)
	(fp_line
		(start 1.65 2.1)
		(end 1.65 3.4)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "c5ca9164-5691-404b-a414-28b68d6e14a8")
	)
	(fp_line
		(start 1.65 3.4)
		(end -1.65 3.4)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "892dda00-0676-4ccc-93bf-82780cdac84f")
	)
	(fp_line
		(start 4.4 -2.45)
		(end 4.4 2.1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "fc8cbc5d-fde8-4545-946f-9871c45a10cc")
	)
	(fp_line
		(start 4.4 2.1)
		(end 1.65 2.1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "8ae91a9d-c9ff-45bc-8c03-a9f8aa40dbeb")
	)
	(fp_line
		(start -3.35 -1)
		(end -3.35 1.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "3b17885b-2fa8-4b65-8f98-63aa353954a8")
	)
	(fp_line
		(start -3.35 1.6)
		(end 3.35 1.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "71560917-4057-4cf9-8563-ddff94c6e77a")
	)
	(fp_line
		(start -1.4 1.65)
		(end -1.4 2.95)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "fd3fb577-d93b-4e5d-b7cc-413dece4a3eb")
	)
	(fp_line
		(start -1.4 2.95)
		(end -1.2 3.15)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "b418dcf1-ccc6-4409-8844-d70589f3ffcc")
	)
	(fp_line
		(start -1.2 3.15)
		(end -0.35 3.15)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "738b6e36-169c-48cd-8e83-b91aaf7eabdd")
	)
	(fp_line
		(start -0.35 3.15)
		(end -0.15 2.95)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "b5682ece-b63d-4b51-92a9-e8d810db63bf")
	)
	(fp_line
		(start -0.15 2.95)
		(end -0.1 2.9)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "607a1eb0-5ba6-4972-b65c-45e10a1602ca")
	)
	(fp_line
		(start -0.1 2.9)
		(end -0.1 1.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "b8641ad2-32ff-47a0-80a6-109ea04d89c6")
	)
	(fp_line
		(start 3.35 -1)
		(end -3.35 -1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "66724a0c-8892-4cd8-af75-f55823cc19ae")
	)
	(fp_line
		(start 3.35 1.6)
		(end 3.35 -1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "c7f5881d-9c9d-48bd-bd40-53c824e23233")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -3.2 0)
		(layer "F.Fab")
		(uuid "7883ddd0-ddfa-4d95-9c10-dc66ac8f3736")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "" smd rect
		(at -3.65 -0.78)
		(size 1 0.8)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(uuid "72ad6616-2da6-4f33-857b-62fa019d27c8")
	)
	(pad "" smd rect
		(at -3.65 1.43)
		(size 1 0.8)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(uuid "479c2cab-e32e-4412-b200-b9480399efb8")
	)
	(pad "" np_thru_hole circle
		(at -1.5 0.33)
		(size 0.9 0.9)
		(drill 0.9)
		(layers "*.Cu" "*.Mask")
		(uuid "f426a162-7ca6-4f63-bf0f-da4db525515e")
	)
	(pad "" np_thru_hole circle
		(at 1.5 0.33)
		(size 0.9 0.9)
		(drill 0.9)
		(layers "*.Cu" "*.Mask")
		(uuid "c496f6c7-62c4-4d93-b633-1865a965465d")
	)
	(pad "" smd rect
		(at 3.65 -0.78)
		(size 1 0.8)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(uuid "0aba9ae1-0c0e-4d0f-99ae-c07a5dd490df")
	)
	(pad "" smd rect
		(at 3.65 1.43)
		(size 1 0.8)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(uuid "6b7d36ff-06f9-4c15-b43d-25f783f0a8fa")
	)
	(pad "1" smd rect
		(at -2.25 -1.43)
		(size 0.7 1.5)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 24 "+BATT")
		(uuid "299048f8-c13b-48bf-b7d1-27fc1262eacd")
	)
	(pad "2" smd rect
		(at 0.75 -1.43)
		(size 0.7 1.5)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "VSW")
		(uuid "1e2bf2d9-66b0-4133-a876-44e107f2c776")
	)
	(pad "3" smd rect
		(at 2.25 -1.43)
		(size 0.7 1.5)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(uuid "fb73ad09-b71d-43c9-84e5-a13cf14ca903")
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Button_Switch_SMD.3dshapes/SW_SPDT_PCM12.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 4.2 27.5 90)
	(uuid "9a6d1d29-1ac0-5fc4-9f44-efb727f77cfb")
	(descr "JST PH series connector, S2B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf)")
	(tags "connector JST PH horizontal")
	(property "Reference" "J2"
		(at 1 -2.55 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "1S 4000mAh"
		(at 1 7.45 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "connector/JST"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr through_hole)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -2.06 -1.46)
		(end -2.06 6.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.06 0.14)
		(end -1.14 0.14)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.06 6.36)
		(end 4.06 6.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.14 -1.46)
		(end -2.06 -1.46)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.14 0.14)
		(end -1.14 -1.46)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.86 0.14)
		(end -1.14 0.14)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.86 0.14)
		(end -0.86 -1.075)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.8 4.1)
		(end -0.8 6.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.3 4.1)
		(end -0.3 6.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.5 2)
		(end 1.5 2)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.5 6.36)
		(end 0.5 2)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 1.5 2)
		(end 1.5 6.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 3.14 -1.46)
		(end 3.14 0.14)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 3.14 0.14)
		(end 2.86 0.14)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 4.06 -1.46)
		(end 3.14 -1.46)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 4.06 0.14)
		(end 3.14 0.14)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 4.06 6.36)
		(end 4.06 -1.46)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.3 2.5)
		(end -0.3 4.1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill no)
		(layer "F.SilkS")
	)
	(fp_rect
		(start 2.3 2.5)
		(end 3.3 4.1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill no)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -2.45 -1.85)
		(end 4.45 6.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.95 -1.35)
		(end -1.95 6.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.95 6.25)
		(end 3.95 6.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.25 -1.35)
		(end -1.95 -1.35)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.25 0.25)
		(end -1.25 -1.35)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -0.5 1.375)
		(end 0.5 1.375)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 0 0.875)
		(end -0.5 1.375)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 0.5 1.375)
		(end 0 0.875)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 3.25 -1.35)
		(end 3.25 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 3.25 0.25)
		(end -1.25 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 3.95 -1.35)
		(end 3.25 -1.35)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 3.95 6.25)
		(end 3.95 -1.35)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 1 2.5 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" thru_hole roundrect
		(at 0 0)
		(size 1.2 1.75)
		(drill 0.75)
		(layers "*.Cu" "*.Mask")
			(net 24 "+BATT")
		(remove_unused_layers no)
		(roundrect_rratio 0.208333)
	)
	(pad "2" thru_hole oval
		(at 2 0)
		(size 1.2 1.75)
		(drill 0.75)
		(layers "*.Cu" "*.Mask")
			(net 10 "GND")
		(remove_unused_layers no)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_JST.3dshapes/JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Connector_FFC-FPC:TE_84953-6_1x06-1MP_P1.0mm_Horizontal"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 4.6 37.0 270)
	(uuid "8577f394-ca20-5dab-8875-9941a3934cf4")
	(descr "TE FPC connector, 06 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4")
	(tags "te fpc 84953")
	(property "Reference" "J30"
		(at 0 -4 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "Conn_01x06"
		(at 0 7.7 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "connector/TE_Connectivity"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -7.07 3.6)
		(end -6.045 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -7.07 4.71)
		(end -7.07 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -6.045 3.6)
		(end -6.045 3.06)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -3.89 -0.91)
		(end -3.065 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -3.065 -0.91)
		(end -3.065 -2.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 3.065 -0.91)
		(end 3.89 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.045 3.06)
		(end 6.045 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.045 3.6)
		(end 7.07 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 7.07 3.6)
		(end 7.07 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 7.07 4.71)
		(end -7.07 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -7.46 -3.3)
		(end 7.46 7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -6.96 3.71)
		(end -5.935 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.96 4.6)
		(end -6.96 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.96 5.61)
		(end -5.935 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.96 6.5)
		(end -6.96 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.935 -0.8)
		(end 5.935 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.935 3.71)
		(end -5.935 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.935 5.61)
		(end -5.935 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -3 -0.8)
		(end -2.5 0.2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -2.5 0.2)
		(end -2 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.935 -0.8)
		(end 5.935 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.935 3.71)
		(end 6.96 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.935 4.6)
		(end 5.935 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.935 5.61)
		(end 6.96 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.96 3.71)
		(end 6.96 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.96 4.6)
		(end -6.96 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.96 5.61)
		(end 6.96 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.96 6.5)
		(end -6.96 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 1.9 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd rect
		(at -2.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
	)
	(pad "2" smd rect
		(at -1.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 12 "+1V8")
	)
	(pad "3" smd rect
		(at -0.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
	)
	(pad "4" smd rect
		(at 0.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 5 "I2C_SDA")
	)
	(pad "5" smd rect
		(at 1.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 6 "I2C_SCL")
	)
	(pad "6" smd rect
		(at 2.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 8 "HR_INT")
	)
	(pad "MP" smd rect
		(at -5.49 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(pad "MP" smd rect
		(at 5.49 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_FFC-FPC.3dshapes/TE_84953-6_1x06-1MP_P1.0mm_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Package_TO_SOT_SMD:SOT-23-6"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 12.7 9.5 0)
	(uuid "607ff5f6-5f68-5fd8-82fa-35359111ceb5")
	(descr "SOT, 6 Pin (JEDEC MO-178 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=MO-178)")
	(tags "SOT TO_SOT_SMD")
	(property "Reference" "U1"
		(at 0 -2.4 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "USBLC6-2SC6"
		(at 0 2.4 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "package/gullwing"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.91 -1.56)
		(end 0.91 -1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.91 -1.51)
		(end -0.91 -1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.91 1.56)
		(end -0.91 1.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.91 -1.56)
		(end 0.91 -1.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.91 1.51)
		(end 0.91 1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.91 1.56)
		(end -0.91 1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy -1.45 -1.51)
			(xy -1.69 -1.84)
			(xy -1.21 -1.84)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.05 -1.5)
		(end -1.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.05 1.5)
		(end -2.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 -1.7)
		(end 1.05 -1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 -1.5)
		(end -1.05 -1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 1.5)
		(end -2.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 1.7)
		(end -1.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 -1.7)
		(end 1.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 -1.5)
		(end 2.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 1.5)
		(end 1.05 1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 1.7)
		(end -1.05 1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.05 -1.5)
		(end 2.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.05 1.5)
		(end 1.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_poly
		(pts
			(xy -0.4 -1.45)
			(xy 0.8 -1.45)
			(xy 0.8 1.45)
			(xy -0.8 1.45)
			(xy -0.8 -1.05)
		)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 90)
		(layer "F.Fab")
		(effects
			(font
				(size 0.72 0.72)
				(thickness 0.11)
			)
		)
	)
	(pad "1" smd roundrect
		(at -1.1375 -0.95)
		(size 1.325 0.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 50 "USB_DP")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at -1.1375 0)
		(size 1.325 0.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(pad "3" smd roundrect
		(at -1.1375 0.95)
		(size 1.325 0.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 34 "USB_DM")
		(roundrect_rratio 0.25)
	)
	(pad "4" smd roundrect
		(at 1.1375 0.95)
		(size 1.325 0.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 49 "USB_DM_C")
		(roundrect_rratio 0.25)
	)
	(pad "5" smd roundrect
		(at 1.1375 0)
		(size 1.325 0.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 51 "VBUS")
		(roundrect_rratio 0.25)
	)
	(pad "6" smd roundrect
		(at 1.1375 -0.95)
		(size 1.325 0.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 25 "USB_DP_C")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23-6.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Resistor_SMD:R_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 9.5 6.4 0)
	(uuid "bafb57b0-03d3-58b6-91ae-e707605acb73")
	(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(property "Reference" "R1"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "5.1k"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.237258 -0.5225)
		(end 0.237258 -0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.237258 0.5225)
		(end 0.237258 0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4125)
		(end 0.8 0.4125)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 42 "NET_CC1")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Resistor_SMD:R_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 9.5 7.7 0)
	(uuid "314605cc-8c71-5a1c-bdf0-c42f3cbd3ff6")
	(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(property "Reference" "R2"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "5.1k"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.237258 -0.5225)
		(end 0.237258 -0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.237258 0.5225)
		(end 0.237258 0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4125)
		(end 0.8 0.4125)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 16 "NET_CC2")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Diode_SMD:D_SOD-323"
	(version 20260206)
	(generator "pcbnew")
	(generator_version "10.0")
	(layer "F.Cu")
	(at 11.4 14.0 0)
	(uuid "c9081086-be45-5239-9525-7175022d7c9f")
	(descr "SOD-323")
	(tags "SOD-323")
	(property "Reference" "D1"
		(at 0 -1.85 0)
		(layer "F.SilkS")
		(uuid "79190826-681c-4fdc-b12c-3f8b6154fbab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "PESD5V0S1BA"
		(at 0.1 1.9 0)
		(layer "F.Fab")
		(uuid "7c6bb9df-d0fb-4fc6-85db-faa2fbb7e2da")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Datasheet" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "f2048a39-80ef-4169-8d09-1f2d88be028d")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(property "Description" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "75d2582e-c82e-4e5b-b310-50525c2c39dc")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.61 -0.85)
		(end -1.61 0.85)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "9fa4a396-756e-42e1-95fe-51f739568da4")
	)
	(fp_line
		(start -1.61 -0.85)
		(end 1.05 -0.85)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "b2b464f7-a7f6-47fb-b985-5c555a333b02")
	)
	(fp_line
		(start -1.61 0.85)
		(end 1.05 0.85)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "58527a67-6c09-4075-bc2b-ca92033302e2")
	)
	(fp_line
		(start -1.6 -0.95)
		(end -1.6 0.95)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "14d3c7e3-424d-4c48-9696-e1af815ca346")
	)
	(fp_line
		(start -1.6 -0.95)
		(end 1.6 -0.95)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "25943275-b4f4-458b-968e-4e7d1b18b813")
	)
	(fp_line
		(start -1.6 0.95)
		(end 1.6 0.95)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "b091ffbd-8d7a-4fd2-affc-9bca98ed58c8")
	)
	(fp_line
		(start 1.6 -0.95)
		(end 1.6 0.95)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "2d3ac3c3-21b1-436c-a482-be0e5cbc03dc")
	)
	(fp_line
		(start -0.9 -0.7)
		(end 0.9 -0.7)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "a91bf8a8-a86b-4c9d-b9d5-768d008733e0")
	)
	(fp_line
		(start -0.9 0.7)
		(end -0.9 -0.7)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "6b9cddb4-30e0-4176-ba95-a9a8f1eebdf1")
	)
	(fp_line
		(start -0.3 -0.35)
		(end -0.3 0.35)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "57ce2fc2-7393-47f8-a2b5-b7c698d824b9")
	)
	(fp_line
		(start -0.3 0)
		(end -0.5 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "736d82eb-b026-4c17-b85c-32188fb4efe7")
	)
	(fp_line
		(start -0.3 0)
		(end 0.2 -0.35)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "c0a23ccb-47a9-4e99-add2-9e1dd8cc2ef7")
	)
	(fp_line
		(start 0.2 -0.35)
		(end 0.2 0.35)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "144ca42e-2457-408a-a685-f16c6c456078")
	)
	(fp_line
		(start 0.2 0)
		(end 0.45 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "582a92da-4d85-4031-886e-0b167511d5ce")
	)
	(fp_line
		(start 0.2 0.35)
		(end -0.3 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "027f9db6-b42c-444b-a815-728f17de2c0d")
	)
	(fp_line
		(start 0.9 -0.7)
		(end 0.9 0.7)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "b8ae0859-36a8-41d7-bebb-140105094216")
	)
	(fp_line
		(start 0.9 0.7)
		(end -0.9 0.7)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "4aa2c486-5a5a-4bc8-938c-7f12da303ff1")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.85 0)
		(layer "F.Fab")
		(uuid "8c174789-8e4c-4a28-9d51-3650bdcb2856")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd roundrect
		(at -1.05 0)
		(size 0.6 0.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 51 "VBUS")
		(roundrect_rratio 0.25)
		(uuid "8ca31b66-f8b6-45f9-8378-2150b0b7a501")
	)
	(pad "2" smd roundrect
		(at 1.05 0)
		(size 0.6 0.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
		(uuid "c9761b48-9e0e-49d7-8a73-4e53ce23d384")
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-323.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Fuse:Fuse_1812_4532Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 11.4 20.3 0)
	(uuid "650485c6-15b1-58a6-8b35-3bad1d39259a")
	(descr "Fuse SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf)")
	(tags "fuse")
	(property "Reference" "F1"
		(at 0 -2.65 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "2A/9V"
		(at 0 2.65 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.386252 -1.71)
		(end 1.386252 -1.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.386252 1.71)
		(end 1.386252 1.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -2.95 -1.95)
		(end 2.95 1.95)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -2.25 -1.6)
		(end 2.25 1.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd roundrect
		(at -2.1375 0)
		(size 1.125 3.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 51 "VBUS")
		(roundrect_rratio 0.222222)
	)
	(pad "2" smd roundrect
		(at 2.1375 0)
		(size 1.125 3.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 39 "VBUS_F")
		(roundrect_rratio 0.222222)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Fuse.3dshapes/Fuse_1206_3216Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Package_SO:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 17.8 24.1 0)
	(uuid "374c3b46-8764-52c8-9068-7b99e0ac0927")
	(descr "HSOP, 8 Pin (https://www.st.com/resource/en/datasheet/l5973d.pdf)")
	(tags "HSOP SO")
	(property "Reference" "U2"
		(at 0 -3.4 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "TP4056"
		(at 0 3.4 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "package/gullwing"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -2.06 -2.56)
		(end 2.06 -2.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.06 -2.465)
		(end -2.06 -2.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.06 2.56)
		(end -2.06 2.465)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 2.06 -2.56)
		(end 2.06 -2.465)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 2.06 2.465)
		(end 2.06 2.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 2.06 2.56)
		(end -2.06 2.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy -2.66 -2.47)
			(xy -2.9 -2.8)
			(xy -2.42 -2.8)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_line
		(start -3.7 -2.46)
		(end -2.2 -2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -3.7 2.46)
		(end -3.7 -2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.2 -2.7)
		(end 2.2 -2.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.2 -2.46)
		(end -2.2 -2.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.2 2.46)
		(end -3.7 2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.2 2.7)
		(end -2.2 2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.2 -2.7)
		(end 2.2 -2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.2 -2.46)
		(end 3.7 -2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.2 2.46)
		(end 2.2 2.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.2 2.7)
		(end -2.2 2.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 3.7 -2.46)
		(end 3.7 2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 3.7 2.46)
		(end 2.2 2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_poly
		(pts
			(xy -0.975 -2.45)
			(xy 1.95 -2.45)
			(xy 1.95 2.45)
			(xy -1.95 2.45)
			(xy -1.95 -1.475)
		)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 90)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "" smd roundrect
		(at -0.6 -0.775)
		(size 0.97 1.25)
		(layers "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "" smd roundrect
		(at -0.6 0.775)
		(size 0.97 1.25)
		(layers "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "" smd roundrect
		(at 0.6 -0.775)
		(size 0.97 1.25)
		(layers "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "" smd roundrect
		(at 0.6 0.775)
		(size 0.97 1.25)
		(layers "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "1" smd roundrect
		(at -2.65 -1.905)
		(size 1.6 0.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at -2.65 -0.635)
		(size 1.6 0.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 20 "NET_PROG")
		(roundrect_rratio 0.25)
	)
	(pad "3" smd roundrect
		(at -2.65 0.635)
		(size 1.6 0.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(pad "4" smd roundrect
		(at -2.65 1.905)
		(size 1.6 0.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 39 "VBUS_F")
		(roundrect_rratio 0.25)
	)
	(pad "5" smd roundrect
		(at 2.65 1.905)
		(size 1.6 0.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 24 "+BATT")
		(roundrect_rratio 0.25)
	)
	(pad "6" smd roundrect
		(at 2.65 0.635)
		(size 1.6 0.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 37 "NET_STDY")
		(roundrect_rratio 0.25)
	)
	(pad "7" smd roundrect
		(at 2.65 -0.635)
		(size 1.6 0.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 30 "NET_CHRG")
		(roundrect_rratio 0.25)
	)
	(pad "8" smd roundrect
		(at 2.65 -1.905)
		(size 1.6 0.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 39 "VBUS_F")
		(roundrect_rratio 0.25)
	)
	(pad "9" smd rect
		(at 0 0)
		(size 2.41 3.1)
		(property pad_prop_heatsink)
		(layers "F.Cu" "F.Mask")
			(net 10 "GND")
		(zone_connect 2)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Resistor_SMD:R_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 21.0 27.9 90)
	(uuid "64319e46-eaa3-5134-aab6-d8e9939767ee")
	(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(property "Reference" "R3"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "1.2k"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.237258 -0.5225)
		(end 0.237258 -0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.237258 0.5225)
		(end 0.237258 0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4125)
		(end 0.8 0.4125)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 20 "NET_PROG")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Capacitor_SMD:C_0805_2012Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 16.5 19.7 90)
	(uuid "5370678e-c205-59f0-a49d-34dbdb24e070")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(property "Reference" "C1"
		(at 0 -1.68 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "10µF"
		(at 0 1.68 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.95 0)
		(size 1 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 39 "VBUS_F")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.95 0)
		(size 1 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Capacitor_SMD:C_0805_2012Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 8.3 34.9 0)
	(uuid "ca6adbc1-92fc-5107-9c65-d540b186b749")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(property "Reference" "C2"
		(at 0 -1.68 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "10µF"
		(at 0 1.68 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.95 0)
		(size 1 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 24 "+BATT")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.95 0)
		(size 1 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Resistor_SMD:R_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 14.0 28.6 0)
	(uuid "0ca511b0-3b69-536e-91cd-1f449a53383b")
	(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(property "Reference" "R4"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "1k"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.237258 -0.5225)
		(end 0.237258 -0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.237258 0.5225)
		(end 0.237258 0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4125)
		(end 0.8 0.4125)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 39 "VBUS_F")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 26 "NET_LCHG_A")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "LED_SMD:LED_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 8.3 28.6 0)
	(uuid "06f2a761-0abf-522e-a3c2-4161642fc566")
	(descr "LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf)")
	(tags "LED")
	(property "Reference" "D2"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "红·充电中"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.485 -0.735)
		(end -1.485 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.485 0.735)
		(end 0.8 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.8 -0.735)
		(end -1.485 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.8 -0.1)
		(end -0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -0.8 0.4)
		(end 0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -0.5 -0.4)
		(end -0.8 -0.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 0.8 -0.4)
		(end -0.5 -0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 0.8 0.4)
		(end 0.8 -0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.7875 0)
		(size 0.875 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 30 "NET_CHRG")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.7875 0)
		(size 0.875 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 26 "NET_LCHG_A")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/LED_SMD.3dshapes/LED_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Resistor_SMD:R_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 14.0 31.1 0)
	(uuid "8731f71a-b6d0-59b4-a7ec-64ac0682fad7")
	(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(property "Reference" "R5"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "1k"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.237258 -0.5225)
		(end 0.237258 -0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.237258 0.5225)
		(end 0.237258 0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4125)
		(end 0.8 0.4125)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 39 "VBUS_F")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 59 "NET_LSTD_A")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "LED_SMD:LED_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 8.3 31.1 0)
	(uuid "3ddf03af-7b74-55f3-9964-1eecebd8457b")
	(descr "LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf)")
	(tags "LED")
	(property "Reference" "D3"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "绿·已充满"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.485 -0.735)
		(end -1.485 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.485 0.735)
		(end 0.8 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.8 -0.735)
		(end -1.485 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.8 -0.1)
		(end -0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -0.8 0.4)
		(end 0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -0.5 -0.4)
		(end -0.8 -0.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 0.8 -0.4)
		(end -0.5 -0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 0.8 0.4)
		(end 0.8 -0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.7875 0)
		(size 0.875 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 37 "NET_STDY")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.7875 0)
		(size 0.875 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 59 "NET_LSTD_A")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/LED_SMD.3dshapes/LED_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Package_SON:Texas_DRC0010J"
	(version 20260206)
	(generator "pcbnew")
	(generator_version "10.0")
	(layer "F.Cu")
	(at 26.7 25.4 0)
	(uuid "fd4b620e-8b6d-5879-b537-e1bc9d04d416")
	(descr "Texas DRC0010J, VSON10 3x3mm Body, 0.5mm Pitch,  http://www.ti.com/lit/ds/symlink/tps63000.pdf")
	(tags "Texas VSON10 3x3mm")
	(property "Reference" "U3"
		(at 0.02032 -2.7 0)
		(layer "F.SilkS")
		(uuid "5f68fb14-16f2-49b3-98b0-1b5269729021")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "TPS63061"
		(at 0.02032 2.8 0)
		(layer "F.Fab")
		(uuid "21283362-4ed5-4497-98bf-ffb53ff27725")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Datasheet" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "e1ff2c46-3dc5-4d2e-8b39-e57e2a0d42ef")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(property "Description" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "97f2b839-9593-4894-8724-257dbd16f85f")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.61 1.38)
		(end -1.61 1.61)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "108a7354-f74f-4749-80a6-c269104f84ed")
	)
	(fp_line
		(start -1.61 1.61)
		(end -0.635 1.61)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "fa7f6762-6c7e-474b-a5d2-11461b8bc5f5")
	)
	(fp_line
		(start -1.32 -1.61)
		(end -0.635 -1.61)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "fdb1355d-544a-4c0f-a2e5-ea094d125e8d")
	)
	(fp_line
		(start 0.635 -1.61)
		(end 1.61 -1.61)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "43012f83-bdf1-4889-8341-b56265c0607e")
	)
	(fp_line
		(start 0.635 1.61)
		(end 1.61 1.61)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "3a52095e-9872-4c97-acc3-5f456c0fd60b")
	)
	(fp_line
		(start 1.61 -1.61)
		(end 1.61 -1.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "bfcf18ac-1112-49ee-9d8c-767c763292f2")
	)
	(fp_line
		(start 1.61 1.38)
		(end 1.61 1.61)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "71ca52fd-e7dd-4987-8661-9ebb2f07514e")
	)
	(fp_poly
		(pts
			(xy -1.64 -1.61) (xy -1.92 -1.61) (xy -1.64 -1.89) (xy -1.64 -1.61)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
		(uuid "aeacd2da-8cf5-4aa2-b584-e49e07ea5755")
	)
	(fp_line
		(start -1.95 -1.95)
		(end -1.95 1.95)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "72e7d170-0ae3-4698-b905-7cf1d5252b10")
	)
	(fp_line
		(start -1.95 -1.95)
		(end 1.95 -1.95)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "edfe88d7-a1a1-4c1e-b83d-c6ce8a578290")
	)
	(fp_line
		(start -1.95 1.95)
		(end 1.95 1.95)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "1c057a1f-6a63-49bd-92c9-727087ed9f1f")
	)
	(fp_line
		(start 1.95 -1.95)
		(end 1.95 1.95)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "1adf5d80-fa94-4b6f-afcf-2b4f4681a9c4")
	)
	(fp_line
		(start -1.5 -0.8)
		(end -1.5 1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "f49550ac-5d48-46ab-9971-afbac1638216")
	)
	(fp_line
		(start -1.5 -0.8)
		(end -0.8 -1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "70457c01-c2a1-4958-be74-1acca7fed4ec")
	)
	(fp_line
		(start -1.5 1.5)
		(end 1.5 1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "b404900b-950b-4ace-89c2-bb544f3ba2ce")
	)
	(fp_line
		(start -0.8 -1.5)
		(end 1.5 -1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "74b37479-818d-404e-940f-a6dfa1e0e199")
	)
	(fp_line
		(start 1.5 -1.5)
		(end 1.5 1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "6c6e1aa8-f7aa-48a8-8162-15bba9b8b258")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(uuid "27a52f44-45e7-45ec-9ccd-b4b404fcf1ea")
		(effects
			(font
				(size 0.7 0.7)
				(thickness 0.1)
			)
		)
	)
	(pad "" smd roundrect
		(at -0.25 -1.53)
		(size 0.25 0.34)
		(layers "F.Paste")
		(roundrect_rratio 0.1)
		(zone_connect 0)
		(uuid "84175ea8-e23c-4ba6-820d-6cf97fef0f80")
	)
	(pad "" smd roundrect
		(at -0.25 1.53)
		(size 0.25 0.34)
		(layers "F.Paste")
		(roundrect_rratio 0.1)
		(zone_connect 0)
		(uuid "78eb4745-7b17-476c-b3f6-fc3d50c5232e")
	)
	(pad "" smd roundrect
		(at 0 -0.63)
		(size 1.5 1.06)
		(layers "F.Paste")
		(roundrect_rratio 0.1)
		(zone_connect 0)
		(uuid "30947f46-d04b-45d9-8178-db5e4cd6f4de")
	)
	(pad "" smd roundrect
		(at 0 0.63)
		(size 1.5 1.06)
		(layers "F.Paste")
		(roundrect_rratio 0.1)
		(zone_connect 0)
		(uuid "17085183-6bfd-4953-82a9-546ffc3f3e46")
	)
	(pad "" smd roundrect
		(at 0.25 -1.53)
		(size 0.25 0.34)
		(layers "F.Paste")
		(roundrect_rratio 0.1)
		(zone_connect 0)
		(uuid "764e9be9-776f-444e-86d8-522ce00205b5")
	)
	(pad "" smd roundrect
		(at 0.25 1.53)
		(size 0.25 0.34)
		(layers "F.Paste")
		(roundrect_rratio 0.1)
		(zone_connect 0)
		(uuid "f202c85a-f9c2-4aaf-b54f-2b1fe6ed65e5")
	)
	(pad "1" smd roundrect
		(at -1.4 -1)
		(size 0.6 0.24)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 53 "NET_L1")
		(roundrect_rratio 0.25)
		(uuid "689e53fd-59c4-4739-93dc-e43b8148a49a")
	)
	(pad "2" smd roundrect
		(at -1.4 -0.5)
		(size 0.6 0.24)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "VSW")
		(roundrect_rratio 0.25)
		(uuid "096f70e4-753e-4024-9ab6-937a7b1a1f84")
	)
	(pad "3" smd roundrect
		(at -1.4 0)
		(size 0.6 0.24)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "VSW")
		(roundrect_rratio 0.25)
		(uuid "a2a9fcc6-dc67-450e-bb5a-b557ef6e4c74")
	)
	(pad "4" smd roundrect
		(at -1.4 0.5)
		(size 0.6 0.24)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
		(uuid "bcedd2f5-a223-4505-9c92-f6f64b6df29d")
	)
	(pad "5" smd roundrect
		(at -1.4 1)
		(size 0.6 0.24)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(uuid "73ff576e-52bb-4bf5-88da-ccdc8900ceb9")
	)
	(pad "6" smd roundrect
		(at 1.4 1)
		(size 0.6 0.24)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 41 "NET_VAUX")
		(roundrect_rratio 0.25)
		(uuid "c6de69d1-5232-4a62-8444-3210c8910d37")
	)
	(pad "7" smd roundrect
		(at 1.4 0.5)
		(size 0.6 0.24)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
		(uuid "5caaa451-74d7-4ded-93a1-f1b3c10fe303")
	)
	(pad "8" smd roundrect
		(at 1.4 0)
		(size 0.6 0.24)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
		(roundrect_rratio 0.25)
		(uuid "fa9b441e-d1a1-4cb8-bb48-8ace6b8c67c4")
	)
	(pad "9" smd roundrect
		(at 1.4 -0.5)
		(size 0.6 0.24)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
		(roundrect_rratio 0.25)
		(uuid "22569bfd-08c5-46bf-b8b9-873652d6c222")
	)
	(pad "10" smd roundrect
		(at 1.4 -1)
		(size 0.6 0.24)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "NET_L2")
		(roundrect_rratio 0.25)
		(uuid "f1a79c54-e98f-4dd1-9172-c69edbfdde51")
	)
	(pad "11" smd custom
		(at 0 0)
		(size 1.65 2.4)
		(layers "F.Cu" "F.Mask")
			(net 10 "GND")
		(zone_connect 0)
		(thermal_bridge_angle 45)
		(options
			(clearance outline)
			(anchor rect)
		)
		(primitives
			(gr_poly
				(pts
					(xy -0.125 -1.1) (xy 0.125 -1.1) (xy 0.125 -1.7) (xy 0.375 -1.7) (xy 0.375 1.7) (xy 0.125 1.7)
					(xy 0.125 1.1) (xy -0.125 1.1) (xy -0.125 1.7) (xy -0.375 1.7) (xy -0.375 -1.7) (xy -0.125 -1.7)
				)
				(width 0)
				(fill yes)
			)
		)
		(uuid "40d2dbad-bd2a-4ec7-a74e-3cadfb7fe159")
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_SON.3dshapes/VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Inductor_SMD:L_Bourns-SRN4018"
	(version 20260206)
	(generator "pcbnew")
	(generator_version "10.0")
	(layer "F.Cu")
	(at 26.7 19.7 0)
	(uuid "1ac5fe07-f34c-5e4a-abc8-990f2ca298c2")
	(descr "Bourns SRN4018 series SMD inductor, https://www.bourns.com/docs/Product-Datasheets/SRN4018.pdf")
	(tags "Bourns SRN4018 SMD inductor")
	(property "Reference" "L1"
		(at 0 3.1 0)
		(layer "F.SilkS")
		(uuid "3dedb81c-61d2-4b15-b3b1-d119f87f68b9")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "1.5µH 3.5A"
		(at 0 -3.1 0)
		(layer "F.Fab")
		(uuid "8d7c144c-2333-437b-baae-4a4d24ad8406")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Datasheet" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "d443e058-8d6d-4f68-9bfa-293c3e3d57eb")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(property "Description" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "c1941028-f9a0-471c-a0bf-5dba4320af9b")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -2.385 -2.11)
		(end -2.385 -1.085)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "2ae1cae8-2d22-403e-bb89-de89c7f5e4ab")
	)
	(fp_line
		(start -2.385 -2.11)
		(end -1.36 -2.11)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "22f4bda8-cece-4c98-8c81-638c9f21e83a")
	)
	(fp_line
		(start -2.385 2.11)
		(end -2.385 1.085)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "63366e25-4231-4a0d-9ec0-69460f7406fe")
	)
	(fp_line
		(start -2.385 2.11)
		(end -1.36 2.11)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "f7a7a741-f4c0-4ba3-b05d-fb25ddaaa75c")
	)
	(fp_line
		(start 2.385 -2.11)
		(end 1.36 -2.11)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "49d800ce-8740-4ad4-b47d-fa09aad89f39")
	)
	(fp_line
		(start 2.385 -2.11)
		(end 2.385 -1.085)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "257f81db-d1c3-4359-a98d-c434aa10901f")
	)
	(fp_line
		(start 2.385 2.11)
		(end 1.36 2.11)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e4c9ce56-15bf-45b8-82fd-c75528eb4a4c")
	)
	(fp_line
		(start 2.385 2.11)
		(end 2.385 1.085)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "8ee46644-4c39-436c-b0db-17e0401a0a24")
	)
	(fp_line
		(start -2.53 -2.25)
		(end -2.53 2.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "53d52618-f6fc-4426-a048-a308c465cf94")
	)
	(fp_line
		(start -2.53 -2.25)
		(end 2.53 -2.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "0b8f247d-3b7a-46b3-88a2-2dc06723d8de")
	)
	(fp_line
		(start -2.53 2.25)
		(end 2.53 2.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "6b2a375f-4cf6-4bf6-9893-1c99c70dbd5e")
	)
	(fp_line
		(start 2.53 -2.25)
		(end 2.53 2.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "b151499d-b7a4-4af2-964a-faa90e3eefb7")
	)
	(fp_line
		(start -2 -2)
		(end -2 2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "ec98b42a-6d8a-47d8-b13d-aaa2a290a8b6")
	)
	(fp_line
		(start -2 -2)
		(end 2 -2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "27d6e3ff-2689-41f3-b19b-62ba0f740369")
	)
	(fp_line
		(start 2 -2)
		(end 2 2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "e8b126da-59ab-4c84-a5ec-ce57d10060c6")
	)
	(fp_line
		(start 2 2)
		(end -2 2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "cb511101-51c4-4594-a26f-53cbe236460a")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(uuid "1d5a415f-ae76-4e3f-bf3f-67c76ee676f5")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd rect
		(at -1.525 0)
		(size 1.5 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 53 "NET_L1")
		(uuid "d08d6d60-419b-4114-b921-1926d33381b1")
	)
	(pad "2" smd rect
		(at 1.525 0)
		(size 1.5 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "NET_L2")
		(uuid "474e41bc-532a-4f5b-beda-1bff0fbf2a5c")
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_Bourns-SRN4018.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Capacitor_SMD:C_0805_2012Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 21.6 22.2 90)
	(uuid "b15a9bb3-2883-5bee-9b37-e6bd85b9482f")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(property "Reference" "C3"
		(at 0 -1.68 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "22µF"
		(at 0 1.68 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.95 0)
		(size 1 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "VSW")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.95 0)
		(size 1 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Capacitor_SMD:C_0805_2012Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 21.6 20.3 90)
	(uuid "e69cd0bd-31a8-574e-bbaf-eef81cf35481")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(property "Reference" "C4"
		(at 0 -1.68 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "22µF"
		(at 0 1.68 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.95 0)
		(size 1 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "VSW")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.95 0)
		(size 1 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Capacitor_SMD:C_0805_2012Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 32.4 21.6 90)
	(uuid "09884474-f129-5f18-af33-f00c80ae4132")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(property "Reference" "C5"
		(at 0 -1.68 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "22µF"
		(at 0 1.68 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.95 0)
		(size 1 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.95 0)
		(size 1 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Capacitor_SMD:C_0805_2012Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 32.4 19.7 90)
	(uuid "a1ef0211-e8ad-5e5b-b9e0-e809dc93ab90")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(property "Reference" "C6"
		(at 0 -1.68 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "22µF"
		(at 0 1.68 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.95 0)
		(size 1 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.95 0)
		(size 1 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Capacitor_SMD:C_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 31.1 28.6 0)
	(uuid "e7e4e66e-38aa-5dd7-b99c-af7080e22a39")
	(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(property "Reference" "C7"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "100nF"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.14058 -0.51)
		(end 0.14058 -0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.14058 0.51)
		(end 0.14058 0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4)
		(end 0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 41 "NET_VAUX")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.9x1.3mm"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 32.4 32.4 0)
	(uuid "ffbdefac-b9fd-5d6c-89e7-0613dbc1e0a6")
	(descr "DFN, 8 Pin (https://www.onsemi.com/pub/Collateral/NB3N551-D.PDF#page=7)")
	(tags "DFN NoLead")
	(property "Reference" "U4"
		(at 0 -1.95 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "MAX17048"
		(at 0 1.95 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "package/no_lead"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.705568 -1.135)
		(end 1.11 -1.135)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 1.11 1.135)
		(end -1.11 1.135)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy -1 -1.14)
			(xy -1.14 -1.33)
			(xy -0.86 -1.33)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.6 -1.13)
		(end -1.25 -1.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.6 1.13)
		(end -1.6 -1.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.25 -1.25)
		(end 1.25 -1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.25 -1.13)
		(end -1.25 -1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.25 1.13)
		(end -1.6 1.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.25 1.25)
		(end -1.25 1.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.25 -1.25)
		(end 1.25 -1.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.25 -1.13)
		(end 1.6 -1.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.25 1.13)
		(end 1.25 1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.25 1.25)
		(end -1.25 1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.6 -1.13)
		(end 1.6 1.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.6 1.13)
		(end 1.25 1.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_poly
		(pts
			(xy -0.5 -1)
			(xy 1 -1)
			(xy 1 1)
			(xy -1 1)
			(xy -1 -0.5)
		)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(pad "" smd roundrect
		(at -0.225 -0.325)
		(size 0.36 0.52)
		(layers "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "" smd roundrect
		(at -0.225 0.325)
		(size 0.36 0.52)
		(layers "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "" smd roundrect
		(at 0.225 -0.325)
		(size 0.36 0.52)
		(layers "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "" smd roundrect
		(at 0.225 0.325)
		(size 0.36 0.52)
		(layers "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "1" smd roundrect
		(at -1 -0.75)
		(size 0.7 0.25)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 24 "+BATT")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at -1 -0.25)
		(size 0.7 0.25)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(pad "3" smd roundrect
		(at -1 0.25)
		(size 0.7 0.25)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 5 "I2C_SDA")
		(roundrect_rratio 0.25)
	)
	(pad "4" smd roundrect
		(at -1 0.75)
		(size 0.7 0.25)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 6 "I2C_SCL")
		(roundrect_rratio 0.25)
	)
	(pad "5" smd roundrect
		(at 1 0.75)
		(size 0.7 0.25)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "6" smd roundrect
		(at 1 0.25)
		(size 0.7 0.25)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "7" smd roundrect
		(at 1 -0.25)
		(size 0.7 0.25)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "8" smd roundrect
		(at 1 -0.75)
		(size 0.7 0.25)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "9" smd rect
		(at 0 0)
		(size 0.9 1.3)
		(property pad_prop_heatsink)
		(layers "F.Cu" "F.Mask")
			(net 10 "GND")
		(zone_connect 2)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_DFN_QFN.3dshapes/DFN-8-1EP_2x2mm_P0.5mm_EP1.05x1.75mm.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Capacitor_SMD:C_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 36.2 32.4 0)
	(uuid "1d8a3ed4-0281-5216-8de1-b6d17b98aff1")
	(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(property "Reference" "C8"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "100nF"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.14058 -0.51)
		(end 0.14058 -0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.14058 0.51)
		(end 0.14058 0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4)
		(end 0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 24 "+BATT")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Resistor_SMD:R_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 17.5 30.4 90)
	(uuid "deaf66e3-e893-512b-a4f7-0e1b9d45e304")
	(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(property "Reference" "R6"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "100k"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.237258 -0.5225)
		(end 0.237258 -0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.237258 0.5225)
		(end 0.237258 0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4125)
		(end 0.8 0.4125)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 24 "+BATT")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 28 "NET_BATADC")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Resistor_SMD:R_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 17.5 32.2 90)
	(uuid "bf60704d-ffc3-5ac1-b10b-6258543e9b88")
	(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(property "Reference" "R7"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "100k"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.237258 -0.5225)
		(end 0.237258 -0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.237258 0.5225)
		(end 0.237258 0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4125)
		(end 0.8 0.4125)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 28 "NET_BATADC")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Capacitor_SMD:C_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 20.1 32.2 0)
	(uuid "c34f34a0-4319-50f7-ab81-b98abd5d00b4")
	(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(property "Reference" "C9"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "100nF"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.14058 -0.51)
		(end 0.14058 -0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.14058 0.51)
		(end 0.14058 0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4)
		(end 0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 28 "NET_BATADC")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.45x1.45mm"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 15.5 15.5 0)
	(uuid "7482e52f-778e-53b8-9d0b-239efea93316")
	(descr "QFN, 16 Pin (http://cds.linear.com/docs/en/datasheet/37551fd.pdf)")
	(tags "QFN NoLead")
	(property "Reference" "U40"
		(at 0 -2.83 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "MAX98357A"
		(at 0 2.83 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "package/no_lead"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.61 -1.135)
		(end -1.61 -1.37)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.61 1.61)
		(end -1.61 1.135)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.313241 -1.61)
		(end -1.135 -1.61)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.135 1.61)
		(end -1.61 1.61)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 1.135 -1.61)
		(end 1.61 -1.61)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 1.61 -1.61)
		(end 1.61 -1.135)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 1.61 1.135)
		(end 1.61 1.61)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 1.61 1.61)
		(end 1.135 1.61)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy -1.61 -1.61)
			(xy -1.85 -1.94)
			(xy -1.37 -1.94)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.13 -1.13)
		(end -1.75 -1.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.13 1.13)
		(end -2.13 -1.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.75 -1.75)
		(end -1.13 -1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.75 -1.13)
		(end -1.75 -1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.75 1.13)
		(end -2.13 1.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.75 1.75)
		(end -1.75 1.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.13 -2.13)
		(end 1.13 -2.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.13 -1.75)
		(end -1.13 -2.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.13 1.75)
		(end -1.75 1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.13 2.13)
		(end -1.13 1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.13 -2.13)
		(end 1.13 -1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.13 -1.75)
		(end 1.75 -1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.13 1.75)
		(end 1.13 2.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.13 2.13)
		(end -1.13 2.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.75 -1.75)
		(end 1.75 -1.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.75 -1.13)
		(end 2.13 -1.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.75 1.13)
		(end 1.75 1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.75 1.75)
		(end 1.13 1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.13 -1.13)
		(end 2.13 1.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.13 1.13)
		(end 1.75 1.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_poly
		(pts
			(xy -0.75 -1.5)
			(xy 1.5 -1.5)
			(xy 1.5 1.5)
			(xy -1.5 1.5)
			(xy -1.5 -0.75)
		)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.75 0.75)
				(thickness 0.11)
			)
		)
	)
	(pad "" smd roundrect
		(at -0.36 -0.36)
		(size 0.58 0.58)
		(layers "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "" smd roundrect
		(at -0.36 0.36)
		(size 0.58 0.58)
		(layers "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "" smd roundrect
		(at 0.36 -0.36)
		(size 0.58 0.58)
		(layers "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "" smd roundrect
		(at 0.36 0.36)
		(size 0.58 0.58)
		(layers "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "1" smd roundrect
		(at -1.4375 -0.75)
		(size 0.875 0.25)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 60 "I2S_AMP_DIN")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at -1.4375 -0.25)
		(size 0.875 0.25)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(pad "3" smd roundrect
		(at -1.4375 0.25)
		(size 0.875 0.25)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(pad "4" smd roundrect
		(at -1.4375 0.75)
		(size 0.875 0.25)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 63 "NET_AMPSD")
		(roundrect_rratio 0.25)
	)
	(pad "5" smd roundrect
		(at -0.75 1.4375)
		(size 0.25 0.875)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "6" smd roundrect
		(at -0.25 1.4375)
		(size 0.25 0.875)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "7" smd roundrect
		(at 0.25 1.4375)
		(size 0.25 0.875)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "VSW")
		(roundrect_rratio 0.25)
	)
	(pad "8" smd roundrect
		(at 0.75 1.4375)
		(size 0.25 0.875)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "VSW")
		(roundrect_rratio 0.25)
	)
	(pad "9" smd roundrect
		(at 1.4375 0.75)
		(size 0.875 0.25)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 29 "NET_SPKP")
		(roundrect_rratio 0.25)
	)
	(pad "10" smd roundrect
		(at 1.4375 0.25)
		(size 0.875 0.25)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 11 "NET_SPKN")
		(roundrect_rratio 0.25)
	)
	(pad "11" smd roundrect
		(at 1.4375 -0.25)
		(size 0.875 0.25)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(pad "12" smd roundrect
		(at 1.4375 -0.75)
		(size 0.875 0.25)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "13" smd roundrect
		(at 0.75 -1.4375)
		(size 0.25 0.875)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "14" smd roundrect
		(at 0.25 -1.4375)
		(size 0.25 0.875)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 27 "I2S_AMP_LRC")
		(roundrect_rratio 0.25)
	)
	(pad "15" smd roundrect
		(at -0.25 -1.4375)
		(size 0.25 0.875)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(pad "16" smd roundrect
		(at -0.75 -1.4375)
		(size 0.25 0.875)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 3 "I2S_AMP_BCLK")
		(roundrect_rratio 0.25)
	)
	(pad "17" smd rect
		(at 0 0)
		(size 1.45 1.45)
		(property pad_prop_heatsink)
		(layers "F.Cu" "F.Mask")
			(net 10 "GND")
		(zone_connect 2)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_DFN_QFN.3dshapes/QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Capacitor_SMD:C_0805_2012Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 19.0 15.5 0)
	(uuid "8d8d028f-1a2d-52b9-818c-2190d2a6bc1a")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(property "Reference" "C17"
		(at 0 -1.68 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "10µF"
		(at 0 1.68 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.95 0)
		(size 1 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "VSW")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.95 0)
		(size 1 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Capacitor_SMD:C_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 20.5 17.0 0)
	(uuid "88e675d1-fa7c-55f5-8f14-3ec52b67025a")
	(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(property "Reference" "C18"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "1µF"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.14058 -0.51)
		(end 0.14058 -0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.14058 0.51)
		(end 0.14058 0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4)
		(end 0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "VSW")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Resistor_SMD:R_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 13.8 18.0 0)
	(uuid "06db74db-9780-568e-812d-c8c3c8037667")
	(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(property "Reference" "R14"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "100k"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.237258 -0.5225)
		(end 0.237258 -0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.237258 0.5225)
		(end 0.237258 0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4125)
		(end 0.8 0.4125)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 63 "NET_AMPSD")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Package_TO_SOT_SMD:SOT-23-5"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 34.5 25.5 0)
	(uuid "3443f32d-eded-5931-8585-4e4de32e71e9")
	(descr "SOT, 5 Pin (JEDEC MO-178 Var AA https://www.jedec.org/document_search?search_api_views_fulltext=MO-178)")
	(tags "SOT TO_SOT_SMD")
	(property "Reference" "U30"
		(at 0 -2.4 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "AP2112K-1.8"
		(at 0 2.4 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "package/gullwing"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.91 -1.56)
		(end 0.91 -1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.91 -1.51)
		(end -0.91 -1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.91 1.56)
		(end -0.91 1.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.91 -1.56)
		(end 0.91 -1.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.91 -0.39)
		(end 0.91 0.39)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.91 1.51)
		(end 0.91 1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.91 1.56)
		(end -0.91 1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy -1.45 -1.51)
			(xy -1.69 -1.84)
			(xy -1.21 -1.84)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.05 -1.5)
		(end -1.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.05 1.5)
		(end -2.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 -1.7)
		(end 1.05 -1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 -1.5)
		(end -1.05 -1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 1.5)
		(end -2.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 1.7)
		(end -1.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 -1.7)
		(end 1.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 -1.5)
		(end 2.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 -0.39)
		(end 1.05 0.39)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 0.39)
		(end 2.05 0.39)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 1.5)
		(end 1.05 1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 1.7)
		(end -1.05 1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.05 -1.5)
		(end 2.05 -0.39)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.05 -0.39)
		(end 1.05 -0.39)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.05 0.39)
		(end 2.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.05 1.5)
		(end 1.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_poly
		(pts
			(xy -0.4 -1.45)
			(xy 0.8 -1.45)
			(xy 0.8 1.45)
			(xy -0.8 1.45)
			(xy -0.8 -1.05)
		)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 90)
		(layer "F.Fab")
		(effects
			(font
				(size 0.72 0.72)
				(thickness 0.11)
			)
		)
	)
	(pad "1" smd roundrect
		(at -1.1375 -0.95)
		(size 1.325 0.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at -1.1375 0)
		(size 1.325 0.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(pad "3" smd roundrect
		(at -1.1375 0.95)
		(size 1.325 0.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
		(roundrect_rratio 0.25)
	)
	(pad "4" smd roundrect
		(at 1.1375 0.95)
		(size 1.325 0.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "5" smd roundrect
		(at 1.1375 -0.95)
		(size 1.325 0.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 12 "+1V8")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23-5.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Capacitor_SMD:C_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 33.5 23.3 0)
	(uuid "db519170-da20-5a09-aee0-e12a70586c11")
	(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(property "Reference" "C15"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "1µF"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.14058 -0.51)
		(end 0.14058 -0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.14058 0.51)
		(end 0.14058 0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4)
		(end 0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Capacitor_SMD:C_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 36.0 23.3 0)
	(uuid "ade30f24-5abc-5ef6-8e78-16f8fcdeb30f")
	(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(property "Reference" "C16"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "2.2µF"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.14058 -0.51)
		(end 0.14058 -0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.14058 0.51)
		(end 0.14058 0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4)
		(end 0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 12 "+1V8")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Resistor_SMD:R_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 34.5 28.0 0)
	(uuid "f939cf1c-8d94-5280-a8fc-71f7b179e1fb")
	(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(property "Reference" "R13"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "10k"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.237258 -0.5225)
		(end 0.237258 -0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.237258 0.5225)
		(end 0.237258 0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4125)
		(end 0.8 0.4125)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 8 "HR_INT")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "RF_Module:ESP32-S3-WROOM-1"
	(version 20260206)
	(generator "pcbnew")
	(generator_version "10.0")
	(layer "F.Cu")
	(at 51.4 21.6 0)
	(uuid "ac2278f8-7328-5750-b633-8652e5f072dd")
	(descr "2.4 GHz Wi-Fi and Bluetooth module  https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf")
	(tags "2.4 GHz Wi-Fi and Bluetooth module")
	(property "Reference" "U10"
		(at -10.5 11.4 90)
		(unlocked yes)
		(layer "F.SilkS")
		(uuid "9538e4ed-27e6-4c37-b989-9859dc0d49e8")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "ESP32-S3-WROOM-1-N8R8"
		(at 0 14.6 0)
		(unlocked yes)
		(layer "F.Fab")
		(uuid "e1105432-6a2f-45d9-8a08-47401d087cf4")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Datasheet" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "315d82fc-36a2-497f-9562-2e13915f793c")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(property "Description" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "dfebdfe7-ae6a-4e3d-b2ca-296c39466b7c")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -9.2 -12.9)
		(end -9.2 -6.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e6924867-bfaf-4cce-80f1-51f366d42fd7")
	)
	(fp_line
		(start -9.2 -12.9)
		(end 9.2 -12.9)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "ede69524-ddea-4e86-94b6-4de7e586f24c")
	)
	(fp_line
		(start -9.2 11.95)
		(end -9.2 12.95)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "b547e70a-6261-4b8c-9fac-180fc82a851f")
	)
	(fp_line
		(start -9.2 12.95)
		(end -7.7 12.95)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "d0adeb2d-d186-4452-91d4-cf580b3c00d8")
	)
	(fp_line
		(start 9.2 -12.9)
		(end 9.2 -6.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "c9587eb5-8419-4bd4-916b-f25094403827")
	)
	(fp_line
		(start 9.2 12.95)
		(end 7.7 12.95)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "483e34f1-47be-4c13-a403-0d468fa05660")
	)
	(fp_line
		(start 9.2 12.95)
		(end 9.2 11.95)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "2d9a0438-47ca-4f02-bdf2-351957836638")
	)
	(fp_poly
		(pts
			(xy -9.2 -6.025) (xy -9.7 -6.025) (xy -9.2 -6.525) (xy -9.2 -6.025)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
		(uuid "745b72d1-b121-4969-8423-f9add86aea48")
	)
	(fp_line
		(start -24 -27.75)
		(end -24 -6.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "d570edbf-8cbc-42a7-9adf-70f6e03988ba")
	)
	(fp_line
		(start -24 -6.75)
		(end -9.75 -6.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "e69e89e9-1911-4ed7-8bd1-a983fc8931e3")
	)
	(fp_line
		(start -9.75 13.45)
		(end -9.75 -6.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "ba37c38d-b63c-4f2a-a2c0-bb73e17654d0")
	)
	(fp_line
		(start -9.75 13.45)
		(end 9.75 13.45)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "43fefb1c-9186-4b5a-8687-c89c43de2fbc")
	)
	(fp_line
		(start 9.75 -6.75)
		(end 9.75 13.45)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "1ab914a6-00c7-4e05-8d18-94c746539b37")
	)
	(fp_line
		(start 9.75 -6.75)
		(end 24 -6.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "8e3a0470-4633-430d-aa42-dc6494854241")
	)
	(fp_line
		(start 24 -27.75)
		(end -24 -27.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "ff91138f-a85b-41fc-8e2c-79656b0bd1f1")
	)
	(fp_line
		(start 24 -6.75)
		(end 24 -27.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "a82a8884-6540-4dff-b9a5-205508340581")
	)
	(fp_line
		(start -9 -12.75)
		(end 9 -12.75)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "269dc11e-3732-4b0d-8804-d7467b2caa7b")
	)
	(fp_line
		(start -9 -6.75)
		(end 9 -6.75)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "8a897ca0-8777-4773-bb1a-a9895ee8d39f")
	)
	(fp_line
		(start -9 12.75)
		(end -9 -12.75)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "da3e179c-c09f-419b-8a15-09fcdbadff32")
	)
	(fp_line
		(start -9 12.75)
		(end 9 12.75)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "7b4f6d54-7ed6-4901-bb69-20ba0e1e7347")
	)
	(fp_line
		(start 9 12.75)
		(end 9 -12.75)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "26c54d9e-426a-46a2-8f80-7ac178df51ff")
	)
	(fp_text user "Antenna"
		(at -0.05 -9.44 0)
		(layer "Cmts.User")
		(uuid "4b120c66-aaba-4c47-b734-acbc527f4e85")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(fp_text user "KEEP-OUT ZONE"
		(at 0 -18.92 0)
		(layer "Cmts.User")
		(uuid "3ac9f068-268d-4899-bfb3-5ac5e5e7bb27")
		(effects
			(font
				(size 2 2)
				(thickness 0.15)
			)
		)
	)
	(fp_text user "${REFERENCE}"
		(at 0 -0.6 0)
		(unlocked yes)
		(layer "F.Fab")
		(uuid "851ab59d-1fd7-45c7-a775-29797327cafc")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "" smd rect
		(at -2.9 1.06)
		(size 0.9 0.9)
		(layers "F.Paste")
		(uuid "36411ff6-02f2-4518-91f8-2ec78503d07a")
	)
	(pad "" smd rect
		(at -2.9 2.46 270)
		(size 0.9 0.9)
		(layers "F.Paste")
		(uuid "a76336ab-532c-408d-8b31-294993bffb9b")
	)
	(pad "" smd rect
		(at -2.9 3.86)
		(size 0.9 0.9)
		(layers "F.Paste")
		(uuid "457f42c3-5be7-4c16-bf1a-e05a256ab5fe")
	)
	(pad "" smd rect
		(at -1.5 1.06 270)
		(size 0.9 0.9)
		(layers "F.Paste")
		(uuid "ff4b7d11-a1c8-4839-82ac-cf1bfed96fb7")
	)
	(pad "" smd rect
		(at -1.5 2.46 270)
		(size 0.9 0.9)
		(layers "F.Paste")
		(uuid "bcfc8ebe-3259-407f-9ca0-83b908ed29de")
	)
	(pad "" smd rect
		(at -1.5 3.86 270)
		(size 0.9 0.9)
		(layers "F.Paste")
		(uuid "8a06555e-37b5-4e52-aed5-4db5d56c9572")
	)
	(pad "" smd rect
		(at -0.1 1.06 270)
		(size 0.9 0.9)
		(layers "F.Paste")
		(uuid "666b891b-b018-4831-bf52-1949ea9940bc")
	)
	(pad "" smd rect
		(at -0.1 2.46 270)
		(size 0.9 0.9)
		(layers "F.Paste")
		(uuid "12a61f3b-c9a1-475a-b95a-228fd98d7166")
	)
	(pad "" smd rect
		(at -0.1 3.86 270)
		(size 0.9 0.9)
		(layers "F.Paste")
		(uuid "4fc9de57-db53-4765-a283-4ab5d54b31ca")
	)
	(pad "1" smd rect
		(at -8.75 -5.26)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(uuid "878a2718-59d9-4c03-a97a-b08c3d833cb9")
	)
	(pad "2" smd rect
		(at -8.75 -3.99)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
		(uuid "8e99653b-c67d-4ba5-a650-293257580275")
	)
	(pad "3" smd rect
		(at -8.75 -2.72)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 58 "NET_EN")
		(uuid "a96d0fd6-c2d2-48a1-b455-757422534d73")
	)
	(pad "4" smd rect
		(at -8.75 -1.45)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 14 "I2S_MIC_WS")
		(uuid "fa18dae7-2fb1-4387-a3c1-308ca16c5c1d")
	)
	(pad "5" smd rect
		(at -8.75 -0.18)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 33 "I2S_MIC_SCK")
		(uuid "494350ab-d17d-4de3-8b96-f15451154d6a")
	)
	(pad "6" smd rect
		(at -8.75 1.09)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 9 "I2S_MIC_SD")
		(uuid "b39d7b4a-582f-449b-82fa-4a80df318fb1")
	)
	(pad "7" smd rect
		(at -8.75 2.36)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 60 "I2S_AMP_DIN")
		(uuid "15b3207d-6547-4224-a45d-823705a30761")
	)
	(pad "8" smd rect
		(at -8.75 3.63)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 7 "IMU_INT3")
		(uuid "5199ad7b-ab84-4971-9df3-53270a0a37ba")
	)
	(pad "9" smd rect
		(at -8.75 4.9)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 47 "IMU_INT4")
		(uuid "43d1f199-f4ee-4683-993f-3ccce3985416")
	)
	(pad "10" smd rect
		(at -8.75 6.17)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 56 "IMU_INT5")
		(uuid "cf7be387-da08-4d97-a3e9-4ac4123d2c0a")
	)
	(pad "11" smd rect
		(at -8.75 7.44)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 19 "IMU_INT6")
		(uuid "f3dab665-64fc-433e-8a62-3743b891ab83")
	)
	(pad "12" smd rect
		(at -8.75 8.71)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 5 "I2C_SDA")
		(uuid "633a5fce-b259-449f-9fbe-80229fc70017")
	)
	(pad "13" smd rect
		(at -8.75 9.98)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 34 "USB_DM")
		(uuid "ad1c7d30-fa47-47fd-bb07-e836ca23dcc6")
	)
	(pad "14" smd rect
		(at -8.75 11.25 180)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 50 "USB_DP")
		(uuid "3db2b854-567f-4631-b764-bc8442698c9a")
	)
	(pad "15" smd rect
		(at -6.985 12.5 270)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 8 "HR_INT")
		(uuid "231482ff-1119-4860-be3c-5d6a4f33d8bb")
	)
	(pad "16" smd rect
		(at -5.715 12.5 270)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(uuid "980b19d6-0b6e-4e93-8693-7a08045bf388")
	)
	(pad "17" smd rect
		(at -4.445 12.5 270)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 6 "I2C_SCL")
		(uuid "9f1c6574-d23a-419e-b919-1dc55a0404ca")
	)
	(pad "18" smd rect
		(at -3.175 12.5 270)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 3 "I2S_AMP_BCLK")
		(uuid "fc4733a3-c200-4f8e-9f63-f3b7c6201473")
	)
	(pad "19" smd rect
		(at -1.905 12.5 270)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 27 "I2S_AMP_LRC")
		(uuid "c399657a-fff5-4af1-9c4f-92ee20314fd7")
	)
	(pad "20" smd rect
		(at -0.635 12.5 270)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 48 "NET_MUXRST")
		(uuid "3a5126db-958f-4248-83d8-c807f9c9d4fb")
	)
	(pad "21" smd rect
		(at 0.635 12.5 270)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 38 "IMU_INT1")
		(uuid "eabde296-8108-4f58-988b-0a8aad10b025")
	)
	(pad "22" smd rect
		(at 1.905 12.5 270)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 32 "IMU_INT2")
		(uuid "baaf558e-dfc4-48a9-a946-c8fcc5540262")
	)
	(pad "23" smd rect
		(at 3.175 12.5 270)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 36 "GPS_TXD")
		(uuid "5af7677d-8b5c-4dfa-a482-9a873acac0d3")
	)
	(pad "24" smd rect
		(at 4.445 12.5 270)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 23 "NET_LED47")
		(uuid "cc576a5e-88e5-4abe-8854-daea569a0ede")
	)
	(pad "25" smd rect
		(at 5.715 12.5 270)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 57 "RGB_DIN")
		(uuid "faea1312-325a-42de-ac79-3fa8abc809f3")
	)
	(pad "26" smd rect
		(at 6.985 12.5 270)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(uuid "aed451a7-38ba-4d37-91a4-86065f3970c8")
	)
	(pad "27" smd rect
		(at 8.75 11.25)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 22 "NET_BOOT")
		(uuid "0dda1646-a646-4a28-a8d2-393b8c94d637")
	)
	(pad "28" smd rect
		(at 8.75 9.98)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(uuid "907bca71-7218-4f03-b4bd-586121fcf8e0")
	)
	(pad "29" smd rect
		(at 8.75 8.71)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(uuid "971da4aa-7a1c-47f1-a56d-06807cbf9be9")
	)
	(pad "30" smd rect
		(at 8.75 7.44)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(uuid "875855ef-0e49-4c33-b3c6-eba229f835d9")
	)
	(pad "31" smd rect
		(at 8.75 6.17)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 52 "GPS_RXD")
		(uuid "99e435f9-35c9-4f7b-81bb-55482767f5f5")
	)
	(pad "32" smd rect
		(at 8.75 4.9)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(uuid "88ce3174-a8b3-4149-886a-872ed4746e98")
	)
	(pad "33" smd rect
		(at 8.75 3.63)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(uuid "4d4b0af0-8c15-45ad-960b-edd8bf430df4")
	)
	(pad "34" smd rect
		(at 8.75 2.36)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(uuid "e0e4f26b-9768-45ce-836e-303c9ffcd23d")
	)
	(pad "35" smd rect
		(at 8.75 1.09)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(uuid "1a6cbd94-89ce-40b4-bf57-ce02cce2f2a0")
	)
	(pad "36" smd rect
		(at 8.75 -0.18)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 61 "DEBUG_RX")
		(uuid "b1074f14-d9b1-488c-9ce1-52a2bed8b998")
	)
	(pad "37" smd rect
		(at 8.75 -1.45)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 64 "DEBUG_TX")
		(uuid "067fb9a1-5278-4e90-ad48-93993d2ed931")
	)
	(pad "38" smd rect
		(at 8.75 -2.72)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 63 "NET_AMPSD")
		(uuid "da24dc07-eed2-4940-92b1-4171ce93a6eb")
	)
	(pad "39" smd rect
		(at 8.75 -3.99)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 28 "NET_BATADC")
		(uuid "4780a920-b601-4f7f-a8a3-6f88eae2541d")
	)
	(pad "40" smd rect
		(at 8.75 -5.26)
		(size 1.5 0.9)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(uuid "879dcbdf-30dc-4f81-b637-1fd4000b50f1")
	)
	(pad "41" thru_hole circle
		(at -2.9 1.76 90)
		(size 0.6 0.6)
		(drill 0.2)
		(property pad_prop_heatsink)
		(layers "*.Cu" "F.Mask")
			(net 10 "GND")
		(remove_unused_layers no)
		(zone_connect 2)
		(uuid "e8dee418-73fb-4299-a24a-c99fc506ec13")
	)
	(pad "41" thru_hole circle
		(at -2.9 3.16)
		(size 0.6 0.6)
		(drill 0.2)
		(property pad_prop_heatsink)
		(layers "*.Cu" "F.Mask")
			(net 10 "GND")
		(remove_unused_layers no)
		(zone_connect 2)
		(uuid "69aed829-3a44-4791-a707-33cc84462f7a")
	)
	(pad "41" thru_hole circle
		(at -2.2 1.06)
		(size 0.6 0.6)
		(drill 0.2)
		(property pad_prop_heatsink)
		(layers "*.Cu" "F.Mask")
			(net 10 "GND")
		(remove_unused_layers no)
		(zone_connect 2)
		(uuid "1cadd618-79f0-4bf1-88db-a5944572d84e")
	)
	(pad "41" thru_hole circle
		(at -2.2 2.46)
		(size 0.6 0.6)
		(drill 0.2)
		(property pad_prop_heatsink)
		(layers "*.Cu" "F.Mask")
			(net 10 "GND")
		(remove_unused_layers no)
		(zone_connect 2)
		(uuid "78c68a1a-003b-474b-97aa-5fc5a7548a4e")
	)
	(pad "41" thru_hole circle
		(at -2.2 3.86)
		(size 0.6 0.6)
		(drill 0.2)
		(property pad_prop_heatsink)
		(layers "*.Cu" "F.Mask")
			(net 10 "GND")
		(remove_unused_layers no)
		(zone_connect 2)
		(uuid "e74c08bc-50c2-477d-9b06-97310a1d390d")
	)
	(pad "41" thru_hole circle
		(at -1.5 1.76)
		(size 0.6 0.6)
		(drill 0.2)
		(property pad_prop_heatsink)
		(layers "*.Cu" "F.Mask")
			(net 10 "GND")
		(remove_unused_layers no)
		(zone_connect 2)
		(uuid "48d1f8a7-bc8d-42c0-99ef-de81f70d61e6")
	)
	(pad "41" smd rect
		(at -1.5 2.46 270)
		(size 3.9 3.9)
		(property pad_prop_heatsink)
		(layers "F.Cu" "F.Mask")
			(net 10 "GND")
		(zone_connect 2)
		(uuid "a039598d-b4bf-41c9-bb5d-5731a11b0e9a")
	)
	(pad "41" thru_hole circle
		(at -1.5 3.16)
		(size 0.6 0.6)
		(drill 0.2)
		(property pad_prop_heatsink)
		(layers "*.Cu" "F.Mask")
			(net 10 "GND")
		(remove_unused_layers no)
		(zone_connect 2)
		(uuid "3462e14d-f877-415a-8b53-496f63df60d2")
	)
	(pad "41" thru_hole circle
		(at -0.8 1.06)
		(size 0.6 0.6)
		(drill 0.2)
		(property pad_prop_heatsink)
		(layers "*.Cu" "F.Mask")
			(net 10 "GND")
		(remove_unused_layers no)
		(zone_connect 2)
		(uuid "d208edff-c132-4ec2-b7b4-840cca7e27cc")
	)
	(pad "41" thru_hole circle
		(at -0.8 2.46)
		(size 0.6 0.6)
		(drill 0.2)
		(property pad_prop_heatsink)
		(layers "*.Cu" "F.Mask")
			(net 10 "GND")
		(remove_unused_layers no)
		(zone_connect 2)
		(uuid "0be97f1b-a517-499d-8409-854fbe773d1f")
	)
	(pad "41" thru_hole circle
		(at -0.8 3.86)
		(size 0.6 0.6)
		(drill 0.2)
		(property pad_prop_heatsink)
		(layers "*.Cu" "F.Mask")
			(net 10 "GND")
		(remove_unused_layers no)
		(zone_connect 2)
		(uuid "d879bd0d-4ddc-47d8-b271-6ac1865b94d9")
	)
	(pad "41" thru_hole circle
		(at -0.1 1.76)
		(size 0.6 0.6)
		(drill 0.2)
		(property pad_prop_heatsink)
		(layers "*.Cu" "F.Mask")
			(net 10 "GND")
		(remove_unused_layers no)
		(zone_connect 2)
		(uuid "421f680d-df61-4cd3-9792-22da5d431fa5")
	)
	(pad "41" thru_hole circle
		(at -0.1 3.16)
		(size 0.6 0.6)
		(drill 0.2)
		(property pad_prop_heatsink)
		(layers "*.Cu" "F.Mask")
			(net 10 "GND")
		(remove_unused_layers no)
		(zone_connect 2)
		(uuid "5e8289d8-6b8c-42b0-9b0c-4b9d5f574318")
	)
	(zone
		(layers "F.Cu" "B.Cu" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
			"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
			"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
			"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
			"In29.Cu" "In30.Cu"
		)
		(uuid "18bbecf2-2977-41e2-b949-929efe1bdbf7")
		(hatch full 0.508)
		(connect_pads
			(clearance 0)
		)
		(min_thickness 0.254)
		(keepout
			(tracks not_allowed)
			(vias not_allowed)
			(pads not_allowed)
			(copperpour not_allowed)
			(footprints not_allowed)
		)
		(placement
			(enabled no)
			(sheetname "")
		)
		(fill
			(thermal_gap 0.508)
			(thermal_bridge_width 0.508)
			(island_removal_mode 0)
		)
		(polygon
			(pts
				(xy -24 -6.75) (xy 24 -6.75) (xy 24 -27.75) (xy -24 -27.75)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/RF_Module.3dshapes/ESP32-S3-WROOM-1.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Capacitor_SMD:C_0805_2012Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 40.5 19.0 0)
	(uuid "a924cd93-17b3-543b-a275-64cee96514dc")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(property "Reference" "C10"
		(at 0 -1.68 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "10µF"
		(at 0 1.68 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.95 0)
		(size 1 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.95 0)
		(size 1 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Capacitor_SMD:C_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 40.5 20.5 0)
	(uuid "a120d26d-ef09-5e05-8ba2-80b33b802853")
	(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(property "Reference" "C11"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "100nF"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.14058 -0.51)
		(end 0.14058 -0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.14058 0.51)
		(end 0.14058 0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4)
		(end 0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Resistor_SMD:R_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 40.5 22.5 0)
	(uuid "ea82a50f-49e6-5a72-9f43-a846799b1d67")
	(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(property "Reference" "R8"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "10k"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.237258 -0.5225)
		(end 0.237258 -0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.237258 0.5225)
		(end 0.237258 0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4125)
		(end 0.8 0.4125)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 58 "NET_EN")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Capacitor_SMD:C_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 40.5 24.0 0)
	(uuid "219aa110-cb9f-57ae-87d8-8b2925430769")
	(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(property "Reference" "C12"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "1µF"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.14058 -0.51)
		(end 0.14058 -0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.14058 0.51)
		(end 0.14058 0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4)
		(end 0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 58 "NET_EN")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Resistor_SMD:R_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 53.8 35.8 0)
	(uuid "c86107e5-75a2-572f-9688-1521dac9bd9a")
	(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(property "Reference" "R9"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "1k"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.237258 -0.5225)
		(end 0.237258 -0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.237258 0.5225)
		(end 0.237258 0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4125)
		(end 0.8 0.4125)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 23 "NET_LED47")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 35 "NET_LED_A")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "LED_SMD:LED_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 56.0 35.8 0)
	(uuid "3381182a-6ee8-52cd-80ae-c7d20ba4e30b")
	(descr "LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf)")
	(tags "LED")
	(property "Reference" "D4"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "蓝·状态"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.485 -0.735)
		(end -1.485 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.485 0.735)
		(end 0.8 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.8 -0.735)
		(end -1.485 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.8 -0.1)
		(end -0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -0.8 0.4)
		(end 0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -0.5 -0.4)
		(end -0.8 -0.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 0.8 -0.4)
		(end -0.5 -0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 0.8 0.4)
		(end 0.8 -0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.7875 0)
		(size 0.875 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.7875 0)
		(size 0.875 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 35 "NET_LED_A")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/LED_SMD.3dshapes/LED_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Button_Switch_SMD:SW_SPST_SKQG_WithStem"
	(version 20260206)
	(generator "pcbnew")
	(generator_version "10.0")
	(layer "F.Cu")
	(at 24.0 10.5 0)
	(uuid "87d02b4b-83fd-569c-8aa7-b615c9b90519")
	(descr "ALPS 5.2mm Square Low-profile Type (Surface Mount) SKQG Series, With stem, http://www.alps.com/prod/info/E/HTML/Tact/SurfaceMount/SKQG/SKQGAFE010.html")
	(tags "SPST Button Switch")
	(property "Reference" "SW2"
		(at 0 -3.6 0)
		(layer "F.SilkS")
		(uuid "d8d792ff-1e02-4bde-abd1-e86939fb5fa8")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "RESET"
		(at 0 3.6 0)
		(layer "F.Fab")
		(uuid "13227082-2f12-4c60-a831-df1e3d83606d")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Datasheet" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "04890fe0-54a6-456e-9e95-8874e5f381a7")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(property "Description" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "fc3d0b11-e542-48bf-bcde-d96d8e600aac")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -2.72 1.04)
		(end -2.72 -1.04)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e31ac74d-de66-4993-82b1-9a6e779d783d")
	)
	(fp_line
		(start -1.45 -2.72)
		(end -1.94 -2.23)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "6a6133af-05de-4e14-b664-cc99d5b508f2")
	)
	(fp_line
		(start -1.45 -2.72)
		(end 1.45 -2.72)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "7059741d-c284-49d5-b9c6-2c22c30352db")
	)
	(fp_line
		(start -1.45 2.72)
		(end -1.94 2.23)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "2c9898e5-8827-48c8-85cb-3419da397e05")
	)
	(fp_line
		(start -1.45 2.72)
		(end 1.45 2.72)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "cd693b72-0132-479b-ba18-24799d46f6f6")
	)
	(fp_line
		(start 1.45 -2.72)
		(end 1.94 -2.23)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "20b5a64f-e59f-4db2-a8ac-ba447c3a3e3c")
	)
	(fp_line
		(start 1.45 2.72)
		(end 1.94 2.23)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "5dc598b3-4686-451e-b871-5c382a7d99fd")
	)
	(fp_line
		(start 2.72 1.04)
		(end 2.72 -1.04)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "6dd01338-0bbf-4ea5-a0c0-b6350d38f3db")
	)
	(fp_line
		(start -4.25 -2.85)
		(end -4.25 2.85)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "273511ee-2fe2-496d-bcc3-91067161e12c")
	)
	(fp_line
		(start -4.25 2.85)
		(end 4.25 2.85)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "2c19d88f-f929-46ad-8b21-0b279823151e")
	)
	(fp_line
		(start 4.25 -2.85)
		(end -4.25 -2.85)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "4fd1dc89-0ef5-4bde-8c19-1f9383b7e880")
	)
	(fp_line
		(start 4.25 2.85)
		(end 4.25 -2.85)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "38d2966c-3686-409d-b4e4-fd97f392aed2")
	)
	(fp_line
		(start -2.6 -1.4)
		(end -1.4 -2.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "64aa76da-2a2f-4eca-b25d-632dacfa4593")
	)
	(fp_line
		(start -2.6 1.4)
		(end -2.6 -1.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "ef4dcc56-ff4e-4358-8935-63986bc37432")
	)
	(fp_line
		(start -1.865 0.95)
		(end -1.865 -0.95)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "3df6996d-b859-4c41-b501-4a904af805db")
	)
	(fp_line
		(start -1.4 -2.6)
		(end 1.4 -2.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "4e34be08-5b5a-4220-80cb-fe9d129fd298")
	)
	(fp_line
		(start -1.4 2.6)
		(end -2.6 1.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "4c98529b-a00e-45f7-86fa-2a9610ebcde6")
	)
	(fp_line
		(start -0.95 -1.865)
		(end -1.865 -0.95)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "67ea35fa-4423-4a97-a037-f68bba9d0188")
	)
	(fp_line
		(start -0.95 -1.865)
		(end 0.95 -1.865)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "51342e95-bddc-4879-b401-1eba31f89991")
	)
	(fp_line
		(start -0.95 1.865)
		(end -1.865 0.95)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "48fa01b3-dfb6-4921-8303-9f3bdff0b28b")
	)
	(fp_line
		(start 0.95 -1.865)
		(end 1.865 -0.95)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "f2544e98-e797-47bd-9135-f88eabf30e6a")
	)
	(fp_line
		(start 0.95 1.865)
		(end -0.95 1.865)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "bcf78462-5a96-443d-8962-81e0d9d7c786")
	)
	(fp_line
		(start 0.95 1.865)
		(end 1.865 0.95)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "3cc23fe0-151f-4472-b379-bfbdc2d8e0be")
	)
	(fp_line
		(start 1.4 -2.6)
		(end 2.6 -1.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "2615abda-f548-4618-b5da-1e3855869965")
	)
	(fp_line
		(start 1.4 2.6)
		(end -1.4 2.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "fd4952e4-5543-4028-aa89-7bdcdef24581")
	)
	(fp_line
		(start 1.865 -0.95)
		(end 1.865 0.95)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "1284d52e-1033-4aa1-8931-539d28b71bca")
	)
	(fp_line
		(start 2.6 -1.4)
		(end 2.6 1.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "7ad2b534-8970-4229-ae3f-17f683252a21")
	)
	(fp_line
		(start 2.6 1.4)
		(end 1.4 2.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "a17b7fbd-8fe2-47fd-adcf-41e50f47d872")
	)
	(fp_circle
		(center 0 0)
		(end 1 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
		(uuid "4feb4ece-fd46-4c31-9d04-ce9dfcd304e2")
	)
	(fp_text user "KEEP-OUT ZONE"
		(at -2.5 -0.2 0)
		(layer "Cmts.User")
		(uuid "57c944a7-f33f-4bca-a1b9-ee94705eb4ae")
		(effects
			(font
				(size 0.2 0.2)
				(thickness 0.03)
			)
		)
	)
	(fp_text user "No F.Cu tracks"
		(at -2.5 0.2 0)
		(layer "Cmts.User")
		(uuid "306c3fed-7d27-482d-a80e-f5f32dc81672")
		(effects
			(font
				(size 0.2 0.2)
				(thickness 0.03)
			)
		)
	)
	(fp_text user "KEEP-OUT ZONE"
		(at 2.5 -0.2 0)
		(layer "Cmts.User")
		(uuid "bcd4464d-3d3c-4a21-8140-57403b0947f9")
		(effects
			(font
				(size 0.2 0.2)
				(thickness 0.03)
			)
		)
	)
	(fp_text user "No F.Cu tracks"
		(at 2.5 0.2 0)
		(layer "Cmts.User")
		(uuid "05910856-9275-4b09-aed7-eea3ff46bad0")
		(effects
			(font
				(size 0.2 0.2)
				(thickness 0.03)
			)
		)
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(uuid "6e3f3a96-c6e9-43ed-81e4-7d783aa52b68")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd rect
		(at -3.1 -1.85)
		(size 1.8 1.1)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 58 "NET_EN")
		(uuid "318382ba-53f7-4651-a477-9cb03443f590")
	)
	(pad "1" smd rect
		(at 3.1 -1.85)
		(size 1.8 1.1)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 58 "NET_EN")
		(uuid "c03a0334-a4e0-4dd8-90d3-cece43ced187")
	)
	(pad "2" smd rect
		(at -3.1 1.85)
		(size 1.8 1.1)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(uuid "62e77f53-5ca8-4c18-b343-801352750328")
	)
	(pad "2" smd rect
		(at 3.1 1.85)
		(size 1.8 1.1)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(uuid "dddf9418-190c-4acc-bb4e-7336641d5ae5")
	)
	(zone
		(layer "F.Cu")
		(uuid "7e337c1e-4c9b-4795-b7d4-fc2468edaa54")
		(hatch full 0.508)
		(connect_pads
			(clearance 0)
		)
		(min_thickness 0.254)
		(keepout
			(tracks not_allowed)
			(vias not_allowed)
			(pads not_allowed)
			(copperpour not_allowed)
			(footprints not_allowed)
		)
		(placement
			(enabled no)
			(sheetname "")
		)
		(fill
			(thermal_gap 0.508)
			(thermal_bridge_width 0.508)
			(island_removal_mode 0)
		)
		(polygon
			(pts
				(xy -4 -1.3) (xy -1 -1.3) (xy -1 1.3) (xy -4 1.3)
			)
		)
	)
	(zone
		(layer "F.Cu")
		(uuid "28062907-1887-4639-a25f-e0361ccd41ee")
		(hatch full 0.508)
		(connect_pads
			(clearance 0)
		)
		(min_thickness 0.254)
		(keepout
			(tracks not_allowed)
			(vias not_allowed)
			(pads not_allowed)
			(copperpour not_allowed)
			(footprints not_allowed)
		)
		(placement
			(enabled no)
			(sheetname "")
		)
		(fill
			(thermal_gap 0.508)
			(thermal_bridge_width 0.508)
			(island_removal_mode 0)
		)
		(polygon
			(pts
				(xy 1 -1.3) (xy 4 -1.3) (xy 4 1.3) (xy 1 1.3)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Button_Switch_SMD.3dshapes/SW_SPST_SKQG_WithStem.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Button_Switch_SMD:SW_SPST_SKQG_WithStem"
	(version 20260206)
	(generator "pcbnew")
	(generator_version "10.0")
	(layer "F.Cu")
	(at 17.5 10.5 0)
	(uuid "44954827-4c45-5553-b7a3-1d376b83228a")
	(descr "ALPS 5.2mm Square Low-profile Type (Surface Mount) SKQG Series, With stem, http://www.alps.com/prod/info/E/HTML/Tact/SurfaceMount/SKQG/SKQGAFE010.html")
	(tags "SPST Button Switch")
	(property "Reference" "SW3"
		(at 0 -3.6 0)
		(layer "F.SilkS")
		(uuid "d8d792ff-1e02-4bde-abd1-e86939fb5fa8")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "BOOT"
		(at 0 3.6 0)
		(layer "F.Fab")
		(uuid "13227082-2f12-4c60-a831-df1e3d83606d")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Datasheet" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "04890fe0-54a6-456e-9e95-8874e5f381a7")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(property "Description" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "fc3d0b11-e542-48bf-bcde-d96d8e600aac")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -2.72 1.04)
		(end -2.72 -1.04)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e31ac74d-de66-4993-82b1-9a6e779d783d")
	)
	(fp_line
		(start -1.45 -2.72)
		(end -1.94 -2.23)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "6a6133af-05de-4e14-b664-cc99d5b508f2")
	)
	(fp_line
		(start -1.45 -2.72)
		(end 1.45 -2.72)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "7059741d-c284-49d5-b9c6-2c22c30352db")
	)
	(fp_line
		(start -1.45 2.72)
		(end -1.94 2.23)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "2c9898e5-8827-48c8-85cb-3419da397e05")
	)
	(fp_line
		(start -1.45 2.72)
		(end 1.45 2.72)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "cd693b72-0132-479b-ba18-24799d46f6f6")
	)
	(fp_line
		(start 1.45 -2.72)
		(end 1.94 -2.23)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "20b5a64f-e59f-4db2-a8ac-ba447c3a3e3c")
	)
	(fp_line
		(start 1.45 2.72)
		(end 1.94 2.23)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "5dc598b3-4686-451e-b871-5c382a7d99fd")
	)
	(fp_line
		(start 2.72 1.04)
		(end 2.72 -1.04)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "6dd01338-0bbf-4ea5-a0c0-b6350d38f3db")
	)
	(fp_line
		(start -4.25 -2.85)
		(end -4.25 2.85)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "273511ee-2fe2-496d-bcc3-91067161e12c")
	)
	(fp_line
		(start -4.25 2.85)
		(end 4.25 2.85)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "2c19d88f-f929-46ad-8b21-0b279823151e")
	)
	(fp_line
		(start 4.25 -2.85)
		(end -4.25 -2.85)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "4fd1dc89-0ef5-4bde-8c19-1f9383b7e880")
	)
	(fp_line
		(start 4.25 2.85)
		(end 4.25 -2.85)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "38d2966c-3686-409d-b4e4-fd97f392aed2")
	)
	(fp_line
		(start -2.6 -1.4)
		(end -1.4 -2.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "64aa76da-2a2f-4eca-b25d-632dacfa4593")
	)
	(fp_line
		(start -2.6 1.4)
		(end -2.6 -1.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "ef4dcc56-ff4e-4358-8935-63986bc37432")
	)
	(fp_line
		(start -1.865 0.95)
		(end -1.865 -0.95)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "3df6996d-b859-4c41-b501-4a904af805db")
	)
	(fp_line
		(start -1.4 -2.6)
		(end 1.4 -2.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "4e34be08-5b5a-4220-80cb-fe9d129fd298")
	)
	(fp_line
		(start -1.4 2.6)
		(end -2.6 1.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "4c98529b-a00e-45f7-86fa-2a9610ebcde6")
	)
	(fp_line
		(start -0.95 -1.865)
		(end -1.865 -0.95)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "67ea35fa-4423-4a97-a037-f68bba9d0188")
	)
	(fp_line
		(start -0.95 -1.865)
		(end 0.95 -1.865)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "51342e95-bddc-4879-b401-1eba31f89991")
	)
	(fp_line
		(start -0.95 1.865)
		(end -1.865 0.95)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "48fa01b3-dfb6-4921-8303-9f3bdff0b28b")
	)
	(fp_line
		(start 0.95 -1.865)
		(end 1.865 -0.95)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "f2544e98-e797-47bd-9135-f88eabf30e6a")
	)
	(fp_line
		(start 0.95 1.865)
		(end -0.95 1.865)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "bcf78462-5a96-443d-8962-81e0d9d7c786")
	)
	(fp_line
		(start 0.95 1.865)
		(end 1.865 0.95)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "3cc23fe0-151f-4472-b379-bfbdc2d8e0be")
	)
	(fp_line
		(start 1.4 -2.6)
		(end 2.6 -1.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "2615abda-f548-4618-b5da-1e3855869965")
	)
	(fp_line
		(start 1.4 2.6)
		(end -1.4 2.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "fd4952e4-5543-4028-aa89-7bdcdef24581")
	)
	(fp_line
		(start 1.865 -0.95)
		(end 1.865 0.95)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "1284d52e-1033-4aa1-8931-539d28b71bca")
	)
	(fp_line
		(start 2.6 -1.4)
		(end 2.6 1.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "7ad2b534-8970-4229-ae3f-17f683252a21")
	)
	(fp_line
		(start 2.6 1.4)
		(end 1.4 2.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "a17b7fbd-8fe2-47fd-adcf-41e50f47d872")
	)
	(fp_circle
		(center 0 0)
		(end 1 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
		(uuid "4feb4ece-fd46-4c31-9d04-ce9dfcd304e2")
	)
	(fp_text user "KEEP-OUT ZONE"
		(at -2.5 -0.2 0)
		(layer "Cmts.User")
		(uuid "57c944a7-f33f-4bca-a1b9-ee94705eb4ae")
		(effects
			(font
				(size 0.2 0.2)
				(thickness 0.03)
			)
		)
	)
	(fp_text user "No F.Cu tracks"
		(at -2.5 0.2 0)
		(layer "Cmts.User")
		(uuid "306c3fed-7d27-482d-a80e-f5f32dc81672")
		(effects
			(font
				(size 0.2 0.2)
				(thickness 0.03)
			)
		)
	)
	(fp_text user "KEEP-OUT ZONE"
		(at 2.5 -0.2 0)
		(layer "Cmts.User")
		(uuid "bcd4464d-3d3c-4a21-8140-57403b0947f9")
		(effects
			(font
				(size 0.2 0.2)
				(thickness 0.03)
			)
		)
	)
	(fp_text user "No F.Cu tracks"
		(at 2.5 0.2 0)
		(layer "Cmts.User")
		(uuid "05910856-9275-4b09-aed7-eea3ff46bad0")
		(effects
			(font
				(size 0.2 0.2)
				(thickness 0.03)
			)
		)
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(uuid "6e3f3a96-c6e9-43ed-81e4-7d783aa52b68")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd rect
		(at -3.1 -1.85)
		(size 1.8 1.1)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 22 "NET_BOOT")
		(uuid "318382ba-53f7-4651-a477-9cb03443f590")
	)
	(pad "1" smd rect
		(at 3.1 -1.85)
		(size 1.8 1.1)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 22 "NET_BOOT")
		(uuid "c03a0334-a4e0-4dd8-90d3-cece43ced187")
	)
	(pad "2" smd rect
		(at -3.1 1.85)
		(size 1.8 1.1)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(uuid "62e77f53-5ca8-4c18-b343-801352750328")
	)
	(pad "2" smd rect
		(at 3.1 1.85)
		(size 1.8 1.1)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(uuid "dddf9418-190c-4acc-bb4e-7336641d5ae5")
	)
	(zone
		(layer "F.Cu")
		(uuid "7e337c1e-4c9b-4795-b7d4-fc2468edaa54")
		(hatch full 0.508)
		(connect_pads
			(clearance 0)
		)
		(min_thickness 0.254)
		(keepout
			(tracks not_allowed)
			(vias not_allowed)
			(pads not_allowed)
			(copperpour not_allowed)
			(footprints not_allowed)
		)
		(placement
			(enabled no)
			(sheetname "")
		)
		(fill
			(thermal_gap 0.508)
			(thermal_bridge_width 0.508)
			(island_removal_mode 0)
		)
		(polygon
			(pts
				(xy -4 -1.3) (xy -1 -1.3) (xy -1 1.3) (xy -4 1.3)
			)
		)
	)
	(zone
		(layer "F.Cu")
		(uuid "28062907-1887-4639-a25f-e0361ccd41ee")
		(hatch full 0.508)
		(connect_pads
			(clearance 0)
		)
		(min_thickness 0.254)
		(keepout
			(tracks not_allowed)
			(vias not_allowed)
			(pads not_allowed)
			(copperpour not_allowed)
			(footprints not_allowed)
		)
		(placement
			(enabled no)
			(sheetname "")
		)
		(fill
			(thermal_gap 0.508)
			(thermal_bridge_width 0.508)
			(island_removal_mode 0)
		)
		(polygon
			(pts
				(xy 1 -1.3) (xy 4 -1.3) (xy 4 1.3) (xy 1 1.3)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Button_Switch_SMD.3dshapes/SW_SPST_SKQG_WithStem.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 38.1 12.7 0)
	(uuid "3e799ae4-fe26-5336-83a6-06c0e262d00c")
	(descr "TSSOP, 24 Pin (JEDEC MO-153 variation AD, 1.00mm body thickness, https://www.jedec.org/document_search?search_api_views_fulltext=MO-153)")
	(tags "TSSOP SO")
	(property "Reference" "U20"
		(at 0 -4.85 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "TCA9548A"
		(at 0 4.85 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "package/gullwing"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -2.31 -4.035)
		(end 2.31 -4.035)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 2.31 4.035)
		(end -2.31 4.035)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy -3.86 -3.58)
			(xy -4.19 -3.34)
			(xy -4.19 -3.82)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_line
		(start -3.85 -4.03)
		(end -2.45 -4.03)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -3.85 4.03)
		(end -3.85 -4.03)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.45 -4.15)
		(end 2.45 -4.15)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.45 -4.03)
		(end -2.45 -4.15)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.45 4.03)
		(end -3.85 4.03)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.45 4.15)
		(end -2.45 4.03)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.45 -4.15)
		(end 2.45 -4.03)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.45 -4.03)
		(end 3.85 -4.03)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.45 4.03)
		(end 2.45 4.15)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.45 4.15)
		(end -2.45 4.15)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 3.85 -4.03)
		(end 3.85 4.03)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 3.85 4.03)
		(end 2.45 4.03)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_poly
		(pts
			(xy -1.2 -3.9)
			(xy 2.2 -3.9)
			(xy 2.2 3.9)
			(xy -2.2 3.9)
			(xy -2.2 -2.9)
		)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd roundrect
		(at -2.8625 -3.575)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at -2.8625 -2.925)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(pad "3" smd roundrect
		(at -2.8625 -2.275)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 48 "NET_MUXRST")
		(roundrect_rratio 0.25)
	)
	(pad "4" smd roundrect
		(at -2.8625 -1.625)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 45 "IMU1_SDA")
		(roundrect_rratio 0.25)
	)
	(pad "5" smd roundrect
		(at -2.8625 -0.975)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 13 "IMU1_SCL")
		(roundrect_rratio 0.25)
	)
	(pad "6" smd roundrect
		(at -2.8625 -0.325)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 40 "IMU2_SDA")
		(roundrect_rratio 0.25)
	)
	(pad "7" smd roundrect
		(at -2.8625 0.325)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 31 "IMU2_SCL")
		(roundrect_rratio 0.25)
	)
	(pad "8" smd roundrect
		(at -2.8625 0.975)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 62 "IMU3_SDA")
		(roundrect_rratio 0.25)
	)
	(pad "9" smd roundrect
		(at -2.8625 1.625)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 17 "IMU3_SCL")
		(roundrect_rratio 0.25)
	)
	(pad "10" smd roundrect
		(at -2.8625 2.275)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 15 "IMU4_SDA")
		(roundrect_rratio 0.25)
	)
	(pad "11" smd roundrect
		(at -2.8625 2.925)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 21 "IMU4_SCL")
		(roundrect_rratio 0.25)
	)
	(pad "12" smd roundrect
		(at -2.8625 3.575)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(pad "13" smd roundrect
		(at 2.8625 3.575)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 1 "IMU5_SDA")
		(roundrect_rratio 0.25)
	)
	(pad "14" smd roundrect
		(at 2.8625 2.925)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 54 "IMU5_SCL")
		(roundrect_rratio 0.25)
	)
	(pad "15" smd roundrect
		(at 2.8625 2.275)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 46 "IMU6_SDA")
		(roundrect_rratio 0.25)
	)
	(pad "16" smd roundrect
		(at 2.8625 1.625)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 44 "IMU6_SCL")
		(roundrect_rratio 0.25)
	)
	(pad "17" smd roundrect
		(at 2.8625 0.975)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "18" smd roundrect
		(at 2.8625 0.325)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
	)
	(pad "19" smd roundrect
		(at 2.8625 -0.325)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 18 "SPARE_SDA")
		(roundrect_rratio 0.25)
	)
	(pad "20" smd roundrect
		(at 2.8625 -0.975)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 55 "SPARE_SCL")
		(roundrect_rratio 0.25)
	)
	(pad "21" smd roundrect
		(at 2.8625 -1.625)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(pad "22" smd roundrect
		(at 2.8625 -2.275)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 6 "I2C_SCL")
		(roundrect_rratio 0.25)
	)
	(pad "23" smd roundrect
		(at 2.8625 -2.925)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 5 "I2C_SDA")
		(roundrect_rratio 0.25)
	)
	(pad "24" smd roundrect
		(at 2.8625 -3.575)
		(size 1.475 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/TSSOP-24_4.4x7.8mm_P0.65mm.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Resistor_SMD:R_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 42.5 6.4 90)
	(uuid "b432cbce-e7ec-54ae-ac72-d77b99bdfb49")
	(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(property "Reference" "R10"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "2.2k"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.237258 -0.5225)
		(end 0.237258 -0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.237258 0.5225)
		(end 0.237258 0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4125)
		(end 0.8 0.4125)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 5 "I2C_SDA")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Resistor_SMD:R_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 45.1 6.4 90)
	(uuid "e6a684ac-83a5-5434-8636-f9ad0deb9145")
	(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(property "Reference" "R11"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "2.2k"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.237258 -0.5225)
		(end 0.237258 -0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.237258 0.5225)
		(end 0.237258 0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4125)
		(end 0.8 0.4125)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 6 "I2C_SCL")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Resistor_SMD:R_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 40.5 17.0 0)
	(uuid "677f07b0-6022-5bf7-8f8b-f2b1a7000c7e")
	(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(property "Reference" "R12"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "10k"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.237258 -0.5225)
		(end 0.237258 -0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.237258 0.5225)
		(end 0.237258 0.5225)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4125)
		(end 0.8 0.4125)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 48 "NET_MUXRST")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.825 0)
		(size 0.8 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Capacitor_SMD:C_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 34.3 7.0 90)
	(uuid "7c1b19f1-4063-5ab9-a45f-e119f74ccf73")
	(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(property "Reference" "C13"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "100nF"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.14058 -0.51)
		(end 0.14058 -0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.14058 0.51)
		(end 0.14058 0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4)
		(end 0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Capacitor_SMD:C_0603_1608Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 36.2 7.0 90)
	(uuid "d28a178f-1e78-5385-8ba3-55bc9154745a")
	(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(property "Reference" "C14"
		(at 0 -1.43 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "4.7µF"
		(at 0 1.43 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.14058 -0.51)
		(end 0.14058 -0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.14058 0.51)
		(end 0.14058 0.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.8 -0.4)
		(end 0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.775 0)
		(size 0.9 0.95)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Connector_FFC-FPC:TE_84953-5_1x05-1MP_P1.0mm_Horizontal"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 14.0 37.5 0)
	(uuid "bf84c206-8923-5add-9725-1e3b932959a8")
	(descr "TE FPC connector, 05 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4")
	(tags "te fpc 84953")
	(property "Reference" "J21"
		(at 0 -4 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "Conn_01x05"
		(at 0 7.7 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "connector/TE_Connectivity"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -6.57 3.6)
		(end -5.545 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -6.57 4.71)
		(end -6.57 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -5.545 3.6)
		(end -5.545 3.06)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -3.39 -0.91)
		(end -2.565 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.565 -0.91)
		(end -2.565 -2.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 2.565 -0.91)
		(end 3.39 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.545 3.06)
		(end 5.545 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.545 3.6)
		(end 6.57 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.57 3.6)
		(end 6.57 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.57 4.71)
		(end -6.57 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -6.96 -3.3)
		(end 6.96 7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -6.46 3.71)
		(end -5.435 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 4.6)
		(end -6.46 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 5.61)
		(end -5.435 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 6.5)
		(end -6.46 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 -0.8)
		(end 5.435 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 3.71)
		(end -5.435 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 5.61)
		(end -5.435 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -2.5 -0.8)
		(end -2 0.2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -2 0.2)
		(end -1.5 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 -0.8)
		(end 5.435 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 3.71)
		(end 6.46 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 4.6)
		(end 5.435 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 5.61)
		(end 6.46 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 3.71)
		(end 6.46 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 4.6)
		(end -6.46 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 5.61)
		(end 6.46 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 6.5)
		(end -6.46 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 1.9 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd rect
		(at -2 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
	)
	(pad "2" smd rect
		(at -1 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
	)
	(pad "3" smd rect
		(at 0 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 45 "IMU1_SDA")
	)
	(pad "4" smd rect
		(at 1 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 13 "IMU1_SCL")
	)
	(pad "5" smd rect
		(at 2 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 38 "IMU_INT1")
	)
	(pad "MP" smd rect
		(at -4.99 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(pad "MP" smd rect
		(at 4.99 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_FFC-FPC.3dshapes/TE_84953-5_1x05-1MP_P1.0mm_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Connector_FFC-FPC:TE_84953-5_1x05-1MP_P1.0mm_Horizontal"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 25.0 37.5 0)
	(uuid "55e5298c-6520-5b72-9d27-680269a3a90c")
	(descr "TE FPC connector, 05 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4")
	(tags "te fpc 84953")
	(property "Reference" "J22"
		(at 0 -4 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "Conn_01x05"
		(at 0 7.7 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "connector/TE_Connectivity"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -6.57 3.6)
		(end -5.545 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -6.57 4.71)
		(end -6.57 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -5.545 3.6)
		(end -5.545 3.06)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -3.39 -0.91)
		(end -2.565 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.565 -0.91)
		(end -2.565 -2.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 2.565 -0.91)
		(end 3.39 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.545 3.06)
		(end 5.545 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.545 3.6)
		(end 6.57 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.57 3.6)
		(end 6.57 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.57 4.71)
		(end -6.57 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -6.96 -3.3)
		(end 6.96 7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -6.46 3.71)
		(end -5.435 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 4.6)
		(end -6.46 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 5.61)
		(end -5.435 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 6.5)
		(end -6.46 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 -0.8)
		(end 5.435 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 3.71)
		(end -5.435 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 5.61)
		(end -5.435 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -2.5 -0.8)
		(end -2 0.2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -2 0.2)
		(end -1.5 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 -0.8)
		(end 5.435 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 3.71)
		(end 6.46 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 4.6)
		(end 5.435 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 5.61)
		(end 6.46 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 3.71)
		(end 6.46 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 4.6)
		(end -6.46 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 5.61)
		(end 6.46 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 6.5)
		(end -6.46 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 1.9 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd rect
		(at -2 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
	)
	(pad "2" smd rect
		(at -1 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
	)
	(pad "3" smd rect
		(at 0 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 40 "IMU2_SDA")
	)
	(pad "4" smd rect
		(at 1 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 31 "IMU2_SCL")
	)
	(pad "5" smd rect
		(at 2 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 32 "IMU_INT2")
	)
	(pad "MP" smd rect
		(at -4.99 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(pad "MP" smd rect
		(at 4.99 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_FFC-FPC.3dshapes/TE_84953-5_1x05-1MP_P1.0mm_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Connector_FFC-FPC:TE_84953-5_1x05-1MP_P1.0mm_Horizontal"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 36.0 37.5 0)
	(uuid "ecc18015-4010-5ffc-bf57-d7506161b77e")
	(descr "TE FPC connector, 05 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4")
	(tags "te fpc 84953")
	(property "Reference" "J23"
		(at 0 -4 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "Conn_01x05"
		(at 0 7.7 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "connector/TE_Connectivity"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -6.57 3.6)
		(end -5.545 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -6.57 4.71)
		(end -6.57 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -5.545 3.6)
		(end -5.545 3.06)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -3.39 -0.91)
		(end -2.565 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.565 -0.91)
		(end -2.565 -2.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 2.565 -0.91)
		(end 3.39 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.545 3.06)
		(end 5.545 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.545 3.6)
		(end 6.57 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.57 3.6)
		(end 6.57 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.57 4.71)
		(end -6.57 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -6.96 -3.3)
		(end 6.96 7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -6.46 3.71)
		(end -5.435 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 4.6)
		(end -6.46 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 5.61)
		(end -5.435 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 6.5)
		(end -6.46 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 -0.8)
		(end 5.435 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 3.71)
		(end -5.435 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 5.61)
		(end -5.435 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -2.5 -0.8)
		(end -2 0.2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -2 0.2)
		(end -1.5 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 -0.8)
		(end 5.435 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 3.71)
		(end 6.46 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 4.6)
		(end 5.435 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 5.61)
		(end 6.46 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 3.71)
		(end 6.46 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 4.6)
		(end -6.46 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 5.61)
		(end 6.46 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 6.5)
		(end -6.46 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 1.9 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd rect
		(at -2 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
	)
	(pad "2" smd rect
		(at -1 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
	)
	(pad "3" smd rect
		(at 0 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 62 "IMU3_SDA")
	)
	(pad "4" smd rect
		(at 1 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 17 "IMU3_SCL")
	)
	(pad "5" smd rect
		(at 2 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 7 "IMU_INT3")
	)
	(pad "MP" smd rect
		(at -4.99 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(pad "MP" smd rect
		(at 4.99 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_FFC-FPC.3dshapes/TE_84953-5_1x05-1MP_P1.0mm_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Connector_FFC-FPC:TE_84953-5_1x05-1MP_P1.0mm_Horizontal"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 47.0 37.5 0)
	(uuid "3a982e7a-1064-552c-85dc-7752f49797eb")
	(descr "TE FPC connector, 05 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4")
	(tags "te fpc 84953")
	(property "Reference" "J24"
		(at 0 -4 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "Conn_01x05"
		(at 0 7.7 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "connector/TE_Connectivity"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -6.57 3.6)
		(end -5.545 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -6.57 4.71)
		(end -6.57 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -5.545 3.6)
		(end -5.545 3.06)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -3.39 -0.91)
		(end -2.565 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.565 -0.91)
		(end -2.565 -2.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 2.565 -0.91)
		(end 3.39 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.545 3.06)
		(end 5.545 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.545 3.6)
		(end 6.57 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.57 3.6)
		(end 6.57 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.57 4.71)
		(end -6.57 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -6.96 -3.3)
		(end 6.96 7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -6.46 3.71)
		(end -5.435 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 4.6)
		(end -6.46 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 5.61)
		(end -5.435 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 6.5)
		(end -6.46 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 -0.8)
		(end 5.435 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 3.71)
		(end -5.435 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 5.61)
		(end -5.435 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -2.5 -0.8)
		(end -2 0.2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -2 0.2)
		(end -1.5 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 -0.8)
		(end 5.435 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 3.71)
		(end 6.46 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 4.6)
		(end 5.435 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 5.61)
		(end 6.46 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 3.71)
		(end 6.46 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 4.6)
		(end -6.46 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 5.61)
		(end 6.46 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 6.5)
		(end -6.46 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 1.9 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd rect
		(at -2 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
	)
	(pad "2" smd rect
		(at -1 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
	)
	(pad "3" smd rect
		(at 0 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 15 "IMU4_SDA")
	)
	(pad "4" smd rect
		(at 1 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 21 "IMU4_SCL")
	)
	(pad "5" smd rect
		(at 2 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 47 "IMU_INT4")
	)
	(pad "MP" smd rect
		(at -4.99 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(pad "MP" smd rect
		(at 4.99 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_FFC-FPC.3dshapes/TE_84953-5_1x05-1MP_P1.0mm_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Connector_FFC-FPC:TE_84953-5_1x05-1MP_P1.0mm_Horizontal"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 8.0 4.5 180)
	(uuid "513dde1c-f300-52f5-9800-2c606fdf4a8a")
	(descr "TE FPC connector, 05 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4")
	(tags "te fpc 84953")
	(property "Reference" "J25"
		(at 0 -4 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "Conn_01x05"
		(at 0 7.7 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "connector/TE_Connectivity"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -6.57 3.6)
		(end -5.545 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -6.57 4.71)
		(end -6.57 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -5.545 3.6)
		(end -5.545 3.06)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -3.39 -0.91)
		(end -2.565 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.565 -0.91)
		(end -2.565 -2.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 2.565 -0.91)
		(end 3.39 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.545 3.06)
		(end 5.545 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.545 3.6)
		(end 6.57 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.57 3.6)
		(end 6.57 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.57 4.71)
		(end -6.57 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -6.96 -3.3)
		(end 6.96 7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -6.46 3.71)
		(end -5.435 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 4.6)
		(end -6.46 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 5.61)
		(end -5.435 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 6.5)
		(end -6.46 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 -0.8)
		(end 5.435 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 3.71)
		(end -5.435 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 5.61)
		(end -5.435 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -2.5 -0.8)
		(end -2 0.2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -2 0.2)
		(end -1.5 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 -0.8)
		(end 5.435 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 3.71)
		(end 6.46 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 4.6)
		(end 5.435 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 5.61)
		(end 6.46 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 3.71)
		(end 6.46 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 4.6)
		(end -6.46 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 5.61)
		(end 6.46 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 6.5)
		(end -6.46 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 1.9 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd rect
		(at -2 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
	)
	(pad "2" smd rect
		(at -1 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
	)
	(pad "3" smd rect
		(at 0 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 1 "IMU5_SDA")
	)
	(pad "4" smd rect
		(at 1 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 54 "IMU5_SCL")
	)
	(pad "5" smd rect
		(at 2 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 56 "IMU_INT5")
	)
	(pad "MP" smd rect
		(at -4.99 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(pad "MP" smd rect
		(at 4.99 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_FFC-FPC.3dshapes/TE_84953-5_1x05-1MP_P1.0mm_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Connector_FFC-FPC:TE_84953-5_1x05-1MP_P1.0mm_Horizontal"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 19.0 4.5 180)
	(uuid "b78ca98a-b539-5ada-8498-71b11a7c9d5e")
	(descr "TE FPC connector, 05 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4")
	(tags "te fpc 84953")
	(property "Reference" "J26"
		(at 0 -4 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "Conn_01x05"
		(at 0 7.7 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "connector/TE_Connectivity"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -6.57 3.6)
		(end -5.545 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -6.57 4.71)
		(end -6.57 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -5.545 3.6)
		(end -5.545 3.06)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -3.39 -0.91)
		(end -2.565 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.565 -0.91)
		(end -2.565 -2.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 2.565 -0.91)
		(end 3.39 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.545 3.06)
		(end 5.545 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.545 3.6)
		(end 6.57 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.57 3.6)
		(end 6.57 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.57 4.71)
		(end -6.57 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -6.96 -3.3)
		(end 6.96 7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -6.46 3.71)
		(end -5.435 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 4.6)
		(end -6.46 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 5.61)
		(end -5.435 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 6.5)
		(end -6.46 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 -0.8)
		(end 5.435 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 3.71)
		(end -5.435 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 5.61)
		(end -5.435 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -2.5 -0.8)
		(end -2 0.2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -2 0.2)
		(end -1.5 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 -0.8)
		(end 5.435 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 3.71)
		(end 6.46 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 4.6)
		(end 5.435 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 5.61)
		(end 6.46 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 3.71)
		(end 6.46 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 4.6)
		(end -6.46 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 5.61)
		(end 6.46 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 6.5)
		(end -6.46 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 1.9 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd rect
		(at -2 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
	)
	(pad "2" smd rect
		(at -1 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
	)
	(pad "3" smd rect
		(at 0 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 46 "IMU6_SDA")
	)
	(pad "4" smd rect
		(at 1 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 44 "IMU6_SCL")
	)
	(pad "5" smd rect
		(at 2 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 19 "IMU_INT6")
	)
	(pad "MP" smd rect
		(at -4.99 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(pad "MP" smd rect
		(at 4.99 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_FFC-FPC.3dshapes/TE_84953-5_1x05-1MP_P1.0mm_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Connector_FFC-FPC:TE_84953-5_1x05-1MP_P1.0mm_Horizontal"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 30.0 4.5 180)
	(uuid "becc1e70-5fcf-5969-a233-9d7d1db2d9ff")
	(descr "TE FPC connector, 05 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4")
	(tags "te fpc 84953")
	(property "Reference" "J27"
		(at 0 -4 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "Conn_01x05"
		(at 0 7.7 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "connector/TE_Connectivity"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -6.57 3.6)
		(end -5.545 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -6.57 4.71)
		(end -6.57 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -5.545 3.6)
		(end -5.545 3.06)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -3.39 -0.91)
		(end -2.565 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.565 -0.91)
		(end -2.565 -2.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 2.565 -0.91)
		(end 3.39 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.545 3.06)
		(end 5.545 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.545 3.6)
		(end 6.57 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.57 3.6)
		(end 6.57 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.57 4.71)
		(end -6.57 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -6.96 -3.3)
		(end 6.96 7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -6.46 3.71)
		(end -5.435 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 4.6)
		(end -6.46 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 5.61)
		(end -5.435 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.46 6.5)
		(end -6.46 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 -0.8)
		(end 5.435 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 3.71)
		(end -5.435 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.435 5.61)
		(end -5.435 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -2.5 -0.8)
		(end -2 0.2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -2 0.2)
		(end -1.5 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 -0.8)
		(end 5.435 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 3.71)
		(end 6.46 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 4.6)
		(end 5.435 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.435 5.61)
		(end 6.46 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 3.71)
		(end 6.46 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 4.6)
		(end -6.46 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 5.61)
		(end 6.46 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.46 6.5)
		(end -6.46 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 1.9 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd rect
		(at -2 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
	)
	(pad "2" smd rect
		(at -1 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
	)
	(pad "3" smd rect
		(at 0 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 18 "SPARE_SDA")
	)
	(pad "4" smd rect
		(at 1 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 55 "SPARE_SCL")
	)
	(pad "5" smd rect
		(at 2 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(pad "MP" smd rect
		(at -4.99 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(pad "MP" smd rect
		(at 4.99 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_FFC-FPC.3dshapes/TE_84953-5_1x05-1MP_P1.0mm_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Connector_FFC-FPC:TE_84953-6_1x06-1MP_P1.0mm_Horizontal"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 40.0 4.5 180)
	(uuid "fe2daed1-64d4-5f25-9f1b-c8dd084583a5")
	(descr "TE FPC connector, 06 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4")
	(tags "te fpc 84953")
	(property "Reference" "J41"
		(at 0 -4 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "Conn_01x06"
		(at 0 7.7 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "connector/TE_Connectivity"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -7.07 3.6)
		(end -6.045 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -7.07 4.71)
		(end -7.07 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -6.045 3.6)
		(end -6.045 3.06)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -3.89 -0.91)
		(end -3.065 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -3.065 -0.91)
		(end -3.065 -2.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 3.065 -0.91)
		(end 3.89 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.045 3.06)
		(end 6.045 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.045 3.6)
		(end 7.07 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 7.07 3.6)
		(end 7.07 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 7.07 4.71)
		(end -7.07 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -7.46 -3.3)
		(end 7.46 7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -6.96 3.71)
		(end -5.935 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.96 4.6)
		(end -6.96 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.96 5.61)
		(end -5.935 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -6.96 6.5)
		(end -6.96 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.935 -0.8)
		(end 5.935 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.935 3.71)
		(end -5.935 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.935 5.61)
		(end -5.935 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -3 -0.8)
		(end -2.5 0.2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -2.5 0.2)
		(end -2 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.935 -0.8)
		(end 5.935 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.935 3.71)
		(end 6.96 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.935 4.6)
		(end 5.935 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.935 5.61)
		(end 6.96 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.96 3.71)
		(end 6.96 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.96 4.6)
		(end -6.96 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.96 5.61)
		(end 6.96 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 6.96 6.5)
		(end -6.96 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 1.9 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd rect
		(at -2.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
	)
	(pad "2" smd rect
		(at -1.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
	)
	(pad "3" smd rect
		(at -0.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 9 "I2S_MIC_SD")
	)
	(pad "4" smd rect
		(at 0.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 33 "I2S_MIC_SCK")
	)
	(pad "5" smd rect
		(at 1.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 14 "I2S_MIC_WS")
	)
	(pad "6" smd rect
		(at 2.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
	)
	(pad "MP" smd rect
		(at -5.49 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(pad "MP" smd rect
		(at 5.49 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_FFC-FPC.3dshapes/TE_84953-6_1x06-1MP_P1.0mm_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Capacitor_SMD:C_0805_2012Metric"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 49.0 7.9 0)
	(uuid "5986d31f-a1a6-51eb-8a76-c5dae78ee066")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(property "Reference" "C19"
		(at 0 -1.68 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "10µF"
		(at 0 1.68 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "SMD_2terminal_chip_molded"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(pad "1" smd roundrect
		(at -0.95 0)
		(size 1 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
		(roundrect_rratio 0.25)
	)
	(pad "2" smd roundrect
		(at 0.95 0)
		(size 1 1.45)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
		(roundrect_rratio 0.25)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Connector_FFC-FPC:TE_84953-4_1x04-1MP_P1.0mm_Horizontal"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 49.0 4.5 180)
	(uuid "6736b163-8ed7-5a2b-b912-348b0657e41a")
	(descr "TE FPC connector, 04 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4")
	(tags "te fpc 84953")
	(property "Reference" "J50"
		(at 0 -4 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "Conn_01x04"
		(at 0 7.7 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "connector/TE_Connectivity"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -6.07 3.6)
		(end -5.045 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -6.07 4.71)
		(end -6.07 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -5.045 3.6)
		(end -5.045 3.06)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.89 -0.91)
		(end -2.065 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.065 -0.91)
		(end -2.065 -2.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 2.065 -0.91)
		(end 2.89 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.045 3.06)
		(end 5.045 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.045 3.6)
		(end 6.07 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.07 3.6)
		(end 6.07 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.07 4.71)
		(end -6.07 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -6.46 -3.3)
		(end 6.46 7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -5.96 3.71)
		(end -4.935 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.96 4.6)
		(end -5.96 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.96 5.61)
		(end -4.935 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.96 6.5)
		(end -5.96 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -4.935 -0.8)
		(end 4.935 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -4.935 3.71)
		(end -4.935 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -4.935 5.61)
		(end -4.935 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -2 -0.8)
		(end -1.5 0.2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.5 0.2)
		(end -1 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 4.935 -0.8)
		(end 4.935 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 4.935 3.71)
		(end 5.96 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 4.935 4.6)
		(end 4.935 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 4.935 5.61)
		(end 5.96 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.96 3.71)
		(end 5.96 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.96 4.6)
		(end -5.96 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.96 5.61)
		(end 5.96 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.96 6.5)
		(end -5.96 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 1.9 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd rect
		(at -1.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
	)
	(pad "2" smd rect
		(at -0.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
	)
	(pad "3" smd rect
		(at 0.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 52 "GPS_RXD")
	)
	(pad "4" smd rect
		(at 1.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 36 "GPS_TXD")
	)
	(pad "MP" smd rect
		(at -4.49 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(pad "MP" smd rect
		(at 4.49 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_FFC-FPC.3dshapes/TE_84953-4_1x04-1MP_P1.0mm_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Connector_FFC-FPC:TE_84953-4_1x04-1MP_P1.0mm_Horizontal"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 56.8 4.5 180)
	(uuid "f20bec97-d460-56c5-8709-7b53890aa66a")
	(descr "TE FPC connector, 04 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4")
	(tags "te fpc 84953")
	(property "Reference" "J51"
		(at 0 -4 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "Conn_01x04"
		(at 0 7.7 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "connector/TE_Connectivity"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -6.07 3.6)
		(end -5.045 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -6.07 4.71)
		(end -6.07 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -5.045 3.6)
		(end -5.045 3.06)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.89 -0.91)
		(end -2.065 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.065 -0.91)
		(end -2.065 -2.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 2.065 -0.91)
		(end 2.89 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.045 3.06)
		(end 5.045 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.045 3.6)
		(end 6.07 3.6)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.07 3.6)
		(end 6.07 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 6.07 4.71)
		(end -6.07 4.71)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -6.46 -3.3)
		(end 6.46 7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -5.96 3.71)
		(end -4.935 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.96 4.6)
		(end -5.96 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.96 5.61)
		(end -4.935 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -5.96 6.5)
		(end -5.96 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -4.935 -0.8)
		(end 4.935 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -4.935 3.71)
		(end -4.935 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -4.935 5.61)
		(end -4.935 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -2 -0.8)
		(end -1.5 0.2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.5 0.2)
		(end -1 -0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 4.935 -0.8)
		(end 4.935 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 4.935 3.71)
		(end 5.96 3.71)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 4.935 4.6)
		(end 4.935 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 4.935 5.61)
		(end 5.96 5.61)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.96 3.71)
		(end 5.96 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.96 4.6)
		(end -5.96 4.6)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.96 5.61)
		(end 5.96 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.96 6.5)
		(end -5.96 6.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 1.9 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd rect
		(at -1.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 43 "+3V3")
	)
	(pad "2" smd rect
		(at -0.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 10 "GND")
	)
	(pad "3" smd rect
		(at 0.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 6 "I2C_SCL")
	)
	(pad "4" smd rect
		(at 1.5 -1.8)
		(size 0.61 2)
		(layers "F.Cu" "F.Mask" "F.Paste")
			(net 5 "I2C_SDA")
	)
	(pad "MP" smd rect
		(at -4.49 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(pad "MP" smd rect
		(at 4.49 1)
		(size 2.68 3.6)
		(layers "F.Cu" "F.Mask" "F.Paste")
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_FFC-FPC.3dshapes/TE_84953-4_1x04-1MP_P1.0mm_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 27.5 33.8 0)
	(uuid "d195a45c-3e07-5a92-bc5e-170ecc81cf60")
	(descr "JST PH series connector, S2B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf)")
	(tags "connector JST PH horizontal")
	(property "Reference" "J40"
		(at 1 -2.55 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "Conn_01x02"
		(at 1 7.45 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "connector/JST"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr through_hole)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -2.06 -1.46)
		(end -2.06 6.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.06 0.14)
		(end -1.14 0.14)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.06 6.36)
		(end 4.06 6.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.14 -1.46)
		(end -2.06 -1.46)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.14 0.14)
		(end -1.14 -1.46)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.86 0.14)
		(end -1.14 0.14)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.86 0.14)
		(end -0.86 -1.075)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.8 4.1)
		(end -0.8 6.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.3 4.1)
		(end -0.3 6.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.5 2)
		(end 1.5 2)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.5 6.36)
		(end 0.5 2)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 1.5 2)
		(end 1.5 6.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 3.14 -1.46)
		(end 3.14 0.14)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 3.14 0.14)
		(end 2.86 0.14)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 4.06 -1.46)
		(end 3.14 -1.46)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 4.06 0.14)
		(end 3.14 0.14)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 4.06 6.36)
		(end 4.06 -1.46)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.3 2.5)
		(end -0.3 4.1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill no)
		(layer "F.SilkS")
	)
	(fp_rect
		(start 2.3 2.5)
		(end 3.3 4.1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill no)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -2.45 -1.85)
		(end 4.45 6.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.95 -1.35)
		(end -1.95 6.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.95 6.25)
		(end 3.95 6.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.25 -1.35)
		(end -1.95 -1.35)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.25 0.25)
		(end -1.25 -1.35)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -0.5 1.375)
		(end 0.5 1.375)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 0 0.875)
		(end -0.5 1.375)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 0.5 1.375)
		(end 0 0.875)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 3.25 -1.35)
		(end 3.25 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 3.25 0.25)
		(end -1.25 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 3.95 -1.35)
		(end 3.25 -1.35)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 3.95 6.25)
		(end 3.95 -1.35)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 1 2.5 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" thru_hole roundrect
		(at 0 0)
		(size 1.2 1.75)
		(drill 0.75)
		(layers "*.Cu" "*.Mask")
			(net 29 "NET_SPKP")
		(remove_unused_layers no)
		(roundrect_rratio 0.208333)
	)
	(pad "2" thru_hole oval
		(at 2 0)
		(size 1.2 1.75)
		(drill 0.75)
		(layers "*.Cu" "*.Mask")
			(net 11 "NET_SPKN")
		(remove_unused_layers no)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_JST.3dshapes/JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(at 53.5 39.0 90)
	(uuid "5fffa6eb-3943-53c8-89c1-710b550a9ee7")
	(descr "Through hole straight pin header, 1x04, 2.54mm pitch, single row")
	(tags "Through hole pin header THT 1x04 2.54mm single row")
	(property "Reference" "J10"
		(at 0 -2.38 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "Conn_01x04"
		(at 0 10 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "connector/pin_header_socket"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr through_hole dnp)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.38 -1.38)
		(end 0 -1.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.38 0)
		(end -1.38 -1.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.38 1.27)
		(end -1.38 9)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.38 1.27)
		(end 1.38 1.27)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.38 9)
		(end 1.38 9)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 1.38 1.27)
		(end 1.38 9)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.77 -1.77)
		(end 1.77 9.39)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.27 -0.635)
		(end -0.635 -1.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.27 8.89)
		(end -1.27 -0.635)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -0.635 -1.27)
		(end 1.27 -1.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 1.27 -1.27)
		(end 1.27 8.89)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 1.27 8.89)
		(end -1.27 8.89)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 3.81 90)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" thru_hole rect
		(at 0 0)
		(size 1.7 1.7)
		(drill 1)
		(layers "*.Cu" "*.Mask")
			(net 43 "+3V3")
		(remove_unused_layers no)
	)
	(pad "2" thru_hole circle
		(at 0 2.54)
		(size 1.7 1.7)
		(drill 1)
		(layers "*.Cu" "*.Mask")
			(net 64 "DEBUG_TX")
		(remove_unused_layers no)
	)
	(pad "3" thru_hole circle
		(at 0 5.08)
		(size 1.7 1.7)
		(drill 1)
		(layers "*.Cu" "*.Mask")
			(net 61 "DEBUG_RX")
		(remove_unused_layers no)
	)
	(pad "4" thru_hole circle
		(at 0 7.62)
		(size 1.7 1.7)
		(drill 1)
		(layers "*.Cu" "*.Mask")
			(net 10 "GND")
		(remove_unused_layers no)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x04_P2.54mm_Vertical.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)

	(footprint "TestPoint:TestPoint_Pad_D1.5mm"
	(version 20260206)
	(generator "pcbnew")
	(generator_version "10.0")
	(layer "F.Cu")
	(at 41.2 26.0 0)
	(uuid "d00439f5-b0b6-5229-a571-653ae2ca6032")
	(descr "SMD pad as test Point, diameter 1.5mm")
	(tags "test point SMD pad")
	(property "Reference" "TP1"
		(at 0 -1.648 0)
		(layer "F.SilkS")
		(uuid "df8ad89a-4372-48a1-959d-41a6068fbd8e")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "3V3"
		(at 0 1.75 0)
		(layer "F.Fab")
		(uuid "bd63ee48-4a53-41ce-9f1d-e4ce2bbaee53")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Datasheet" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "6ddb8d9b-4a6f-4e73-b4e3-16a4311cb5fb")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(property "Description" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "810e48b7-3682-411d-98a5-a1d48d8a1e2c")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(attr exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_circle
		(center 0 0)
		(end 0 0.95)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill no)
		(layer "F.SilkS")
		(uuid "188606f7-41cf-4150-b22a-1b8f5885c87d")
	)
	(fp_circle
		(center 0 0)
		(end 1.25 0)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
		(uuid "c1a41909-dd0d-4698-8873-fe0292742945")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.65 0)
		(layer "F.Fab")
		(uuid "e27ec8d6-1f94-40cd-a4aa-0963d435fbb8")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd circle
		(at 0 0)
		(size 1.5 1.5)
		(layers "F.Cu" "F.Mask")
			(net 43 "+3V3")
		(uuid "8a03cd79-fadf-4c81-9b59-724c470e191a")
	)
	(embedded_fonts no)
)

	(footprint "TestPoint:TestPoint_Pad_D1.5mm"
	(version 20260206)
	(generator "pcbnew")
	(generator_version "10.0")
	(layer "F.Cu")
	(at 41.2 28.0 0)
	(uuid "98b5211a-a09b-5761-a913-90dc3ae08eb4")
	(descr "SMD pad as test Point, diameter 1.5mm")
	(tags "test point SMD pad")
	(property "Reference" "TP2"
		(at 0 -1.648 0)
		(layer "F.SilkS")
		(uuid "df8ad89a-4372-48a1-959d-41a6068fbd8e")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "GND"
		(at 0 1.75 0)
		(layer "F.Fab")
		(uuid "bd63ee48-4a53-41ce-9f1d-e4ce2bbaee53")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Datasheet" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "6ddb8d9b-4a6f-4e73-b4e3-16a4311cb5fb")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(property "Description" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "810e48b7-3682-411d-98a5-a1d48d8a1e2c")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(attr exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_circle
		(center 0 0)
		(end 0 0.95)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill no)
		(layer "F.SilkS")
		(uuid "188606f7-41cf-4150-b22a-1b8f5885c87d")
	)
	(fp_circle
		(center 0 0)
		(end 1.25 0)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
		(uuid "c1a41909-dd0d-4698-8873-fe0292742945")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.65 0)
		(layer "F.Fab")
		(uuid "e27ec8d6-1f94-40cd-a4aa-0963d435fbb8")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd circle
		(at 0 0)
		(size 1.5 1.5)
		(layers "F.Cu" "F.Mask")
			(net 10 "GND")
		(uuid "8a03cd79-fadf-4c81-9b59-724c470e191a")
	)
	(embedded_fonts no)
)

	(footprint "TestPoint:TestPoint_Pad_D1.5mm"
	(version 20260206)
	(generator "pcbnew")
	(generator_version "10.0")
	(layer "F.Cu")
	(at 41.2 30.0 0)
	(uuid "9d01cc37-52f3-5cac-91c3-97def9cb1180")
	(descr "SMD pad as test Point, diameter 1.5mm")
	(tags "test point SMD pad")
	(property "Reference" "TP3"
		(at 0 -1.648 0)
		(layer "F.SilkS")
		(uuid "df8ad89a-4372-48a1-959d-41a6068fbd8e")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "BATT"
		(at 0 1.75 0)
		(layer "F.Fab")
		(uuid "bd63ee48-4a53-41ce-9f1d-e4ce2bbaee53")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Datasheet" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "6ddb8d9b-4a6f-4e73-b4e3-16a4311cb5fb")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(property "Description" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "810e48b7-3682-411d-98a5-a1d48d8a1e2c")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(attr exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_circle
		(center 0 0)
		(end 0 0.95)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill no)
		(layer "F.SilkS")
		(uuid "188606f7-41cf-4150-b22a-1b8f5885c87d")
	)
	(fp_circle
		(center 0 0)
		(end 1.25 0)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
		(uuid "c1a41909-dd0d-4698-8873-fe0292742945")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.65 0)
		(layer "F.Fab")
		(uuid "e27ec8d6-1f94-40cd-a4aa-0963d435fbb8")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd circle
		(at 0 0)
		(size 1.5 1.5)
		(layers "F.Cu" "F.Mask")
			(net 24 "+BATT")
		(uuid "8a03cd79-fadf-4c81-9b59-724c470e191a")
	)
	(embedded_fonts no)
)

	(footprint "TestPoint:TestPoint_Pad_D1.5mm"
	(version 20260206)
	(generator "pcbnew")
	(generator_version "10.0")
	(layer "F.Cu")
	(at 41.2 32.0 0)
	(uuid "8ca339e2-752a-52b6-b466-74f7f5dfe7d3")
	(descr "SMD pad as test Point, diameter 1.5mm")
	(tags "test point SMD pad")
	(property "Reference" "TP4"
		(at 0 -1.648 0)
		(layer "F.SilkS")
		(uuid "df8ad89a-4372-48a1-959d-41a6068fbd8e")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "VBUS"
		(at 0 1.75 0)
		(layer "F.Fab")
		(uuid "bd63ee48-4a53-41ce-9f1d-e4ce2bbaee53")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Datasheet" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "6ddb8d9b-4a6f-4e73-b4e3-16a4311cb5fb")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(property "Description" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "810e48b7-3682-411d-98a5-a1d48d8a1e2c")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(attr exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_circle
		(center 0 0)
		(end 0 0.95)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill no)
		(layer "F.SilkS")
		(uuid "188606f7-41cf-4150-b22a-1b8f5885c87d")
	)
	(fp_circle
		(center 0 0)
		(end 1.25 0)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
		(uuid "c1a41909-dd0d-4698-8873-fe0292742945")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.65 0)
		(layer "F.Fab")
		(uuid "e27ec8d6-1f94-40cd-a4aa-0963d435fbb8")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd circle
		(at 0 0)
		(size 1.5 1.5)
		(layers "F.Cu" "F.Mask")
			(net 51 "VBUS")
		(uuid "8a03cd79-fadf-4c81-9b59-724c470e191a")
	)
	(embedded_fonts no)
)

	(footprint "TestPoint:TestPoint_Pad_D1.5mm"
	(version 20260206)
	(generator "pcbnew")
	(generator_version "10.0")
	(layer "F.Cu")
	(at 40.6 35.8 0)
	(uuid "35b975e0-804e-5332-a000-0cb5008caa09")
	(descr "SMD pad as test Point, diameter 1.5mm")
	(tags "test point SMD pad")
	(property "Reference" "TP5"
		(at 0 -1.648 0)
		(layer "F.SilkS")
		(uuid "df8ad89a-4372-48a1-959d-41a6068fbd8e")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "RGB_DIN"
		(at 0 1.75 0)
		(layer "F.Fab")
		(uuid "bd63ee48-4a53-41ce-9f1d-e4ce2bbaee53")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Datasheet" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "6ddb8d9b-4a6f-4e73-b4e3-16a4311cb5fb")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(property "Description" ""
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "810e48b7-3682-411d-98a5-a1d48d8a1e2c")
		(effects
			(font
				(size 1.27 1.27)
				(thickness 0.15)
			)
		)
	)
	(attr exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_circle
		(center 0 0)
		(end 0 0.95)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill no)
		(layer "F.SilkS")
		(uuid "188606f7-41cf-4150-b22a-1b8f5885c87d")
	)
	(fp_circle
		(center 0 0)
		(end 1.25 0)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
		(uuid "c1a41909-dd0d-4698-8873-fe0292742945")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.65 0)
		(layer "F.Fab")
		(uuid "e27ec8d6-1f94-40cd-a4aa-0963d435fbb8")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" smd circle
		(at 0 0)
		(size 1.5 1.5)
		(layers "F.Cu" "F.Mask")
			(net 57 "RGB_DIN")
		(uuid "8a03cd79-fadf-4c81-9b59-724c470e191a")
	)
	(embedded_fonts no)
)

	(gr_rect (start 42.0 8.0) (end 61.0 15.5) (stroke (width 0.15) (type solid)) (fill no) (layer "F.CrtYd") (uuid "ac406386-f950-5cd1-8244-3e236ce66be6"))
	(gr_text "ANTENNA KEEPOUT" (at 51.4 17.2 0) (layer "F.SilkS") (effects (font (size 0.7 0.7) (thickness 0.15))) (uuid "4bb204d6-4465-561e-9866-907fb32a9cb9"))
	(gr_text "PetVest Hub rev.A" (at 26.5 9.4 0) (layer "F.SilkS") (effects (font (size 1.2 1.2) (thickness 0.15))) (uuid "11c15908-c53b-5472-a57e-7494b6b7779c"))
	(gr_text "62x42mm 2L / ratsnest only" (at 26.5 10.9 0) (layer "F.SilkS") (effects (font (size 0.75 0.75) (thickness 0.15))) (uuid "be00d861-3640-5d87-9712-ddb6c30c2ebb"))
)