A0 A1 A2 A3 A4 A5 V+ GND 8 9 10 11 12 13 14 15 0 1 2 3 4 5 6 7 PWM GND V+ GND OE SCL SDA VCC I2C Address (Open=0/Closed=1) 1+ +RW C2 GND OE SCL SDA VCC V+ V+ POWER VCC: Logic: V+: 3-5V 3-5V 6V Max Use V+ for servo supply PCA9685 16-Channel 12-Bit PWM Driver Terminal block is reverse polarity protected. Side breakout pins are not! Freq.: 40-1000Hz PCA9685 16 x 12-bit PWM adafruit! >NAME >VALUE >NAME >VALUE 0805 (2012 Metric) >NAME >VALUE >NAME >NAME >VALUE <b>CHIPLED 0805</b> >NAME >VALUE A C >NAME >VALUE <b>ELECTROLYTIC CAPACITOR</b><p> grid 3.5 mm, diameter 8 mm >NAME >VALUE >NAME >VALUE <b>EAGLE Design Rules for PCBCart (Standard PCB)</b> <p><b>Characteristics:</b></p> <p> <ul> <li>Minimum Trace/Spacing: 8mil (0.2mm)</li> <li>Minimum Annular Ring: 12mil (0.3mm)</li> <li>Minimum Drill: 0.4mm (16mil)</li> </ul> <p><b>Hole Tolerances</b> (for reference only):</p> <ul> <li>+/- 0.1mm for PTH holes</li> <li>+/- 0.075mm for NPTH holes</li> </ul> <p><strong>Note: </strong> All vias 20mill/0.5mm and smaller will be tented by default</p> </p>