1
3.5" 320x480 TFT
w/Touch Screen
for Raspberry Pi model B+
STMPE610 + HX8357D
#18 PWM
#26
#19
#13
#6
#5
#21
#12
#16
#20
<b>SOT-23</b>
>NAME
>VALUE
>NAME
>VALUE
<b>Small Outline Transistor</b> - 5 Pin
>NAME
>VALUE
<b>0805 MicroPitch</b>
>NAME
>VALUE
Inductor - 1007 (2518 Metric)
<p>L: 2.5mm x W: 1.8mm x H: 1.8mm</p>
>NAME
>VALUE
<b>SOD-123</b>
<p>Source: http://www.diodes.com/datasheets/ds30139.pdf</p>
>NAME
>VALUE
<b>SMA Surface Mount Diode</b>
>NAME
>VALUE
3.5" 320x480
TFT LCD Display
50
1
XL
XR
YU
YD
>NAME
>VALUE
Suggested Cutout Zone
Suggested Captouch cutout
>NAME
>VALUE
>NAME
>VALUE
<b>Revision Level Field</b> - 56 mil<p>
Set version with global board attribute '>REV'
>REV
5V0
5.0V
GND
TXD
RXD
GPIO18
GND
GPIO23
GPIO24
GND
GPIO25
SPI_CE0_N
SPI_CE1_N
3V3
SDA1
SCL1
GPIO4
GND
GPIO17
GPIO27
GPIO22
3V3
SPI_MOSI
SPI_MISO
SPI_SCLK
GND
EECLK
GND
GPIO12
GND
GPIO16
GPIO20
GPIO21
EEDATA
GPIO5
GPIO6
GPIO13
GPOI19
GPIO26
GND
<b>Small Outline IC - 150mil Wide</b>
>NAME
>VALUE
1.5 x 2.0mm SMT pad (no solder paste)
>NAME
>VALUE
<b>EAGLE Design Rules</b>
<p>
Die Standard-Design-Rules sind so gewählt, dass sie für
die meisten Anwendungen passen. Sollte ihre Platine
besondere Anforderungen haben, treffen Sie die erforderlichen
Einstellungen hier und speichern die Design Rules unter
einem neuen Namen ab.
<b>Adafruit board design rules</b>
<p>
<ul>
<li>Smallest drill: 16mm</li>
<li>Min trace: 10mil</li>
<li>Min spacing: 8mil</li>
<li>Dimension spacing: 10mil</li>
<li>Tenting for vias</li>
<li>Angle check on</li>
</ul>
Since Version 6.2.2 text objects can contain more than one line,
which will not be processed correctly with this version.