MILKDROP preset authoring guide
   return to milkdrop.html



* * *
Note that there is another, quite comprehensive, Preset Authoring Guide 
available on the web at http://www.milkdrop.co.uk/, which is continually 
updated and expanded through the hard work of a few dedicated preset 
authors.  Whereas this guide (the one you are currently viewing) gives the bare
technical specifications for writing your own presets, the guide at milkdrop.co.uk
'starts at the beginning' and walks you through all of the mathematics and subtleties
of 'rolling your own', explaining things in great detail.  The guide at milkdrop.co.uk
is very highly recommended to anyone who wishes to learn more about creating their 
own presets.
* * *


Section Listing
-----------------------
1. about presets
2. preset authoring - basic
3. preset authoring - advanced
    a. per-frame equations
    b. per-vertex equations
    c. variable pools, declaring your own variables, persistence of values
    d. preset init code; carrying values between variable pools, using q1-q32
    e. custom shapes & waves
    f. pixel shaders
         conceptual overview
         the WARP shader
         the COMPOSITE shader
         pixel shader reference
           intrinsic instructions
           per-vertex shader inputs
           per-frame shader inputs
         texture sampling
           milkdrop's built-in textures - main, blur, and noise
           blur1, blur2, blur3
           noise textures
           reading textures from disk
           random texture selection
         misc. cool shader tricks
         quality assurance for shaders
    g. quality assurance
    h. debugging
    i. function reference (for expressions, not shaders)



1. About Presets
-----------------------
    When you watch MilkDrop, you are watching a series of Presets.  Each
    one has its own look and feel, draws the sound waves in a particular
    way, and has certain motions to it.  After some time, you will see
    a short blend transition, and then you will be watching a new preset.  

    A single 'preset' is a collection of parameters that tell MilkDrop how 
    to draw the wave, how to warp the image around, and so on.  MilkDrop
    ships with over 100 built-in presets, each one having a distinct
    look and feel to it.  
    
    Using MilkDrop's built-in "preset-editing menu" (the M key), you can 
    edit presets on the fly, on-screen, from within the program.  You can 
    make slight adjustments to existing presets, then save over them; 
    or you can change lots of things, so the preset doesn't look anything 
    like the original, and then save it under a new name.  You can even 
    write insane new mathematical equations, of your own imagination, 
    into your preset files and come up with things that MilkDrop has never 
    done before!
    
    Each preset is saved as a file with the ".milk" extension, so you can
    easily send them to your friends or post them on the web.  You can also 
    go to http://www.nullsoft.com/free/milkdrop and then jump to the
    "preset sharing forum" to see what other people have come up with,
    or post your own cool, new presets.  milkdrop.co.uk/ is another great 
    place to download collections of presets made by others like yourself.



2. Preset Authoring - Basic
-----------------------

    You can edit the properties of the current preset by hitting 'M',
    which brings up the "preset-editing menu".  From this menu you
    can use the up and down arrow keys to select an item.  Press
    the RIGHT arrow key to move forward through the menu and select
    the item (note: you can also hit SPACE or RETURN to do this);
    ***press the LEFT arrow key to go back to the previous menu.***  
    
    Pressing 'M' while the menu is already showing will hide the menu;
    pressing ESCAPE will do the same thing.  Press 'M' again to bring
    the menu back.
    
    Once you've reached an item on the menu whose value can be edited,
    use the UP and DOWN arrow keys to increase or decrease its value,
    respectively.  Changes will register immediately.  Use PAGE UP and
    PAGE DOWN to increase the value more quickly.  Hold down SHIFT
    and use the UP/DOWN arrow keys to change the value very slowly.
    Hit RETURN To keep the new value, or ESC to abort the change.
    
    If the item you're editing is a text string, you can use the
    arrow keys to move around.  The Insert key can be used to toggle
    between insert and overtype modes.  You can hold shift and use
    the arrow keys (home, end, left, right) to make a selection,
    which will be identified by brackets [].  You can then use CTRL-C 
    or CTRL-X to copy or cut text.  CTRL-P pastes.  When finished
    editing, hit RETURN To keep the new string, or ESC to abort the 
    change.

    You'll want to get into the habit of using SCROLL LOCK whenever
    you're making changes to a preset that you intend to save; 
    otherwise, MilkDrop is sure to move you along to a new (random)
    preset, over time.  When the menus are showing, the preset is
    automatically temporarily locked, but BE CAREFUL - if you're not
    also using SCROLL LOCK, then 0.1 seconds after you hide the menu
    to take a look at your new masterpiece, MilkDrop might load a 
    random new preset on you, and you'd lose your changes!  And you 
    might then ask me: "how large is large?"  And I will tell you: 
    "thirty."
    
    There are also some hotkeys that will allow you to change certain
    common parameters to the current preset.  These are listed below.
    
    MOTION
        i/I - zoom in/out
        [ / ] - push motion to the left/right (dx)
        { / } - push motion up/down (dy)
        < / > - rotate left/right (rot)
        o/O - shrink/grow the amplitude of the warp effect

    WAVEFORM
        W   - cycle through waveforms
        j/J - scale waveform down/up
        e/E - make the waveform more transparent/more solid

    BRIGHTNESS **
        g/G - decrease, increase gamma (brightness) **

    VIDEO ECHO effect **
        q/Q - scale 2nd graphics layer down/up **
        F - flip 2nd graphics layer (cycles through 4 fixed orientations) **

    ** these keys only have an effect if you are running a 
       MilkDrop 1-era preset.  In MilkDrop 2-era presets,
       these values are embedded in the shader, so you need
       to go into the composite shader and tweak the code.



3. Preset Authoring - Advanced
-----------------------

    This section describes how to use the 'per-frame' and 'per-vertex' 
    equations to develop unique new presets.


    
    a. PER-FRAME EQUATIONS
    ----------------------
    
    When you hit 'm' to show the preset-editing menu, several items
    show up.  If you explore the sub-menus, you'll see that
    all of the properties that make up the preset you're currently
    viewing are there.  The values you can specify here (such as
    zoom amount, rotation amount, wave color, etc.) are all static
    values, meaning that they don't change in time.  For example, 
    take the 'zoom amount' option under the 'motion' submenu.  
    If this value is 1.0, there is no zoom.  If the value is 1.01, 
    the image zooms in 1% every frame.  If the value is 1.10, the 
    image zooms in 10% every frame.  If the value is 0.9, the image 
    zooms out 10% every frame; and so on.

    However, presets get far more interesting if you can take these 
    parameters (such as the zoom amount) and animate them (make them 
    change over time).  For example, if you could take the 'zoom 
    amount' parameter and make it oscillate (vary) between 0.9 and 
    1.1 over time, the image would cyclically zoom in and out, in 
    time.

    You can do this - by writing 'per-frame' and 'per-vertex' 
    equations.  Let's start with 'per-frame' equations.  These are
    executed once per frame.  So, if you were to type the following
    equation in:
        
        zoom = zoom + 0.1*sin(time);
    
    ...then the zoom amount would oscillate between 0.9 and 1.1
    over time.  (Recall from your geometry classes that sin()
    returns a value between -1 and 1.)  The equation says: "take
    the static value of 'zoom', then replace it with that value,
    plus some variation."  This particular equation would oscillate 
    (cycle) every 6.28 seconds, since the sin() function's 
    period is 6.28 (PI*2) seconds.  If you wanted it to make it 
    cycle every 2 seconds, you could use: 
    
        zoom = zoom + 0.1*sin(time*3.14);
    
    Now, let's say you wanted to make the color of the waveform
    (sound wave) that gets plotted on the screen vary through time.
    The color is defined by three values, one for each of the main
    color components (red, green, and blue), each in the range 0 to 1
    (0 is dark, 1 is full intensity).  You could use something like this:
    
        wave_r = wave_r + 0.5*sin(time*1.13);
        wave_g = wave_g + 0.5*sin(time*1.23);
        wave_b = wave_b + 0.5*sin(time*1.33);
    
    It's nice to stagger the frequencies (1.13, 1.23, and 1.33) of
    the sine functions for the red, green, and blue color components
    of the wave so that they cycle at different rates, to avoid them
    always being all the same (which would create a greyscale wave).
    
    Here is a full list of the variables available for writing per-frame 
    equations:
    
    NAME       WRITABLE?  RANGE  DESCRIPTION
    ----       ---------  -----  -----------                                                                   
    zoom           yes    >0     controls inward/outward motion.  0.9=zoom out 10% per frame, 1.0=no zoom, 1.1=zoom in 10%
    zoomexp        yes    >0     controls the curvature of the zoom; 1=normal
    rot            yes           controls the amount of rotation.  0=none, 0.1=slightly right, -0.1=slightly clockwise, 0.1=CCW
    warp           yes    >0     controls the magnitude of the warping; 0=none, 1=normal, 2=major warping...
    cx             yes    0..1   controls where the center of rotation and stretching is, horizontally.  0=left, 0.5=center, 1=right
    cy             yes    0..1   controls where the center of rotation and stretching is, vertically.  0=top, 0.5=center, 1=bottom
    dx             yes           controls amount of constant horizontal motion; -0.01 = move left 1% per frame, 0=none, 0.01 = move right 1%
    dy             yes           controls amount of constant vertical motion; -0.01 = move up 1% per frame, 0=none, 0.01 = move down 1%
    sx             yes    >0     controls amount of constant horizontal stretching; 0.99=shrink 1%, 1=normal, 1.01=stretch 1%           
    sy             yes    >0     controls amount of constant vertical stretching; 0.99=shrink 1%, 1=normal, 1.01=stretch 1%             
    wave_mode      yes    0,1,2,3,4,5,6,7  controls which of the 8 types of waveform is drawn
    wave_x         yes    0..1   position of the waveform: 0 = far left edge of screen, 0.5 = center, 1 = far right
    wave_y         yes    0..1   position of the waveform: 0 = very bottom of screen, 0.5 = center, 1 = top
    wave_r         yes    0..1   amount of red color in the wave (0..1),
    wave_g         yes    0..1   amount of green color in the wave (0..1)    
    wave_b         yes    0..1   amount of blue color in the wave (0..1)    
    wave_a         yes    0..1   opacity of the wave (0..1) [0=transparent, 1=opaque]
    wave_mystery   yes    -1..1  what this parameter does is a mystery.  (honestly, though, this value does different things for each waveform; for example, it could control angle at which the waveform was drawn.)
    wave_usedots   yes    0/1    if 1, the waveform is drawn as dots (instead of lines)
    wave_thick     yes    0/1    if 1, the waveform's lines (or dots) are drawn with double thickness
    wave_additive  yes    0/1    if 1, the wave is drawn additively, saturating the image at white
    wave_brighten  yes    0/1    if 1, all 3 r/g/b colors will be scaled up until at least one reaches 1.0
    ob_size        yes    0..0.5 thickness of the outer border drawn at the edges of the screen every frame
    ob_r           yes    0..1   amount of red color in the outer border
    ob_g           yes    0..1   amount of green color in the outer border
    ob_b           yes    0..1   amount of blue color in the outer border
    ob_a           yes    0..1   opacity of the outer border (0=transparent, 1=opaque)
    ib_size        yes    0..0.5 thickness of the inner border drawn at the edges of the screen every frame
    ib_r           yes    0..1   amount of red color in the inner border                                   
    ib_g           yes    0..1   amount of green color in the inner border                                 
    ib_b           yes    0..1   amount of blue color in the inner border                                  
    ib_a           yes    0..1   opacity of the inner border (0=transparent, 1=opaque)                     
    mv_r           yes    0..1   amount of red color in the motion vectors
    mv_g           yes    0..1   amount of green color in the motion vectors
    mv_b           yes    0..1   amount of blue color in the motion vectors
    mv_a           yes    0..1   opacity of the motion vectors (0=transparent, 1=opaque)                     
    mv_x           yes    0..64  the number of motion vectors in the X direction
    mv_y           yes    0..48  the number of motion vectors in the Y direction
    mv_l           yes    0..5   the length of the motion vectors (0=no trail, 1=normal, 2=double...)
    mv_dx          yes    -1..1  horizontal placement offset of the motion vectors
    mv_dy          yes    -1..1  vertical placement offset of the motion vectors
    decay          yes    0..1   controls the eventual fade to black; 1=no fade, 0.9=strong fade, 0.98=recommended
    gamma          yes    >0     controls display brightness; 1=normal, 2=double, 3=triple, etc.
    echo_zoom      yes    >0     controls the size of the second graphics layer
    echo_alpha     yes    >0     controls the opacity of the second graphics layer; 0=transparent (off), 0.5=half-mix, 1=opaque
    echo_orient    yes    0,1,2,3 selects an orientation for the second graphics layer.  0=normal, 1=flip on x, 2=flip on y, 3=flip on both
    darken_center  yes    0/1    if 1, help keeps the image from getting too bright by continually dimming the center point
    wrap           yes    0/1    sets whether or not screen elements can drift off of one side and onto the other
    invert         yes    0/1    inverts the colors in the image
    brighten       yes    0/1    brightens the darker parts of the image (nonlinear; square root filter)
    darken         yes    0/1    darkens the brighter parts of the image (nonlinear; squaring filter)
    solarize       yes    0/1    emphasizes mid-range colors
    monitor        yes    any    set this value for debugging your preset code; if you hit the 'N' key, 
                                    the value of 'monitor' will be posted in the upper-right corner of milkdrop.
                                    for example, setting "monitor = q3;" would let you keep an eye on q3's value.
        
    time           NO     >0     retrieves the current time, in seconds, since MilkDrop started running
    fps            NO     >0     retrieves the current framerate, in frames per second.
    frame          NO            retrieves the number of frames of animation elapsed since the program started
    progress       NO     0..1   progress through the current preset; if preset was just loaded, this is closer to 0; if preset is about to end, this is closer to 1.
                                   -note that if Scroll Lock is on, 'progress' will freeze!
                   
    bass           NO     >0     retrieves the current amount of bass.  1 is normal; below ~0.7 is quiet; above ~1.3 is loud bass
    mid            NO     >0       -same, but for mids (middle frequencies)
    treb           NO     >0       -same, but for treble (high) frequencies
    bass_att       NO     >0     retrieves an attenuated reading on the bass, meaning that it is damped in time and doesn't change so rapidly.
    mid_att        NO     >0       -same, but for mids (middle frequencies)
    treb_att       NO     >0       -same, but for treble (high) frequencies

    meshx          NO     8-128  tells you the user's mesh size in the X direction.  always an integer value.
    meshy          NO     6-96   tells you the user's mesh size in the Y direction.  always an integer value.
    pixelsx        NO     16-4096 width of the viz window, in pixels.  If Canvas Stretch is on, this is the pre-stretched size.  (same as "texsize.x" for shaders)
    pixelsy        NO     16-4096 height of the viz window, in pixels.  If Canvas Stretch is on, this is the pre-stretched size.  (same as "texsize.y" for shaders)
    aspectx        NO     >0     multiply an x-coordinate by this to make the preset look the same at any aspect (window height:width) ratio.
                                   -value: if widescreen, 1; if window is tall, h/w.
    aspecty        NO     >0     multiply a y-coordinate by this to make the preset look the same at any aspect (window height:width) ratio.
                                   -value: if widescreen, w/h; if window is tall, 1.
    
    blur1_min      yes    0..1   Normally these are set to 0 (min) and 1 (max).
    blur2_min      yes    0..1   You can clamp the values in the blur texture to a tighter
    blur3_min      yes    0..1     range, though.  
    blur1_max      yes    0..1   This will increase the precision in the blur textures,
    blur2_max      yes    0..1     but you run the risk of clamping values to your min/max.
    blur3_max      yes    0..1   If you use the GetBlur1() .. GetBlur3() functions to sample
    blur1_edge_darken yes 0..1     the blur texture, they will automatically "unpack" the
                                   values for you in the end!
    
    q1             yes    any    } Used to carry values along a chain                                         
    q2             yes    any    }  from the preset init code,                                                
    q3             yes    any    }  to the preset per-frame code, then on                                     
    q4             yes    any    }    to the preset per-vertex code;                                          
    q5             yes    any    }    or to the custom shape per-frame code,                                  
    q6             yes    any    }    or to the custom wave per-frame code,                                   
    q7             yes    any    }      then to the custom wave per-vertex code;                              
    ...                          }    or to the [pixel] shader code.                                          
    q31            yes    any    } Click here to see a diagram for the Q vars.
    q32            yes    any    } 

    
    Some of the variables are read-only, meaning that you shouldn't change
    their values them through the equations.  You can; it won't stop you; 
    but the results are unpredictable.
            
    You can also make up to 30 of your own variables.  For example:
    
        my_volume = (bass + mid + treb)/3;
        zoom = zoom + 0.1*(my_volume - 1);

    This would make the zoom amount increase when the music is loud,
    and decrease when the music is quiet.  
    
    HOWEVER, custom variables do not carry over from per-frame equations
    to per-vertex equations; if you set a custom variable's value in the
    per-frame equations, and try to read it in the per-vertex equations,
    you will not get the correct value.  Instead, you have to "bridge the
    gap" using 32 special variables: q1 through q32.  This is usually only
    used when you want to precompute some custom values in the per-frame 
    equations for later use in the per-vertex equations (or for use in
    the pixel shaders).  For a good example of this, see the 'dynamic swirls' 
    preset.  See below for more information on q1-q32.
    
            
    
    
    b. PER-VERTEX EQUATIONS
    -----------------------
    
    So far we've discussed only how to change parameters based on
    time.  What if you wanted to also vary a parameter, such as the
    zoom amount, in different ways, for different locations on the
    screen?  For example, normally, the result of the 'zoom' parameter
    is to just do a flat zoom.  This doesn't look very realistic, 
    because you don't see any perspective in the zoom.  It would be
    better if we could give a unique zoom amount to each pixel on 
    the screen; we could make the pixels far away from the center
    zoom more, and this would give it more perspective.  In order
    to do this, we use "per-vertex" equations, instead of per-frame
    equations.
    
    The code for this per-vertex equation is simple:
    
        zoom = zoom + rad*0.1;
        
    Where 'rad' is the radius of the pixel if it were cast into
    polar coordinates; from another perspective, 'rad' is the distance 
    of the pixel from the center of the screen.  'rad is zero at the
    center, and 1 at the corners.  So if we run the above code,
    the image will be zoomed into 10% more at the edges of the screen
    than at the center.
    
    The per-vertex equations are really just like the per-frame equations,
    except for a variables.  The following variables are available
    exclusively to per-vertex equations (and not to per-frame equations):
    
    NAME   WRITEABLE? RANGE    DESCRIPTION
    ----   ---------- -----    -----------                                                                   
    x          NO     0..1     retrieves the x-position of the current pixel.  At the very left edge of the screen this would be 0; in the middle, 0.5; and at the right, 1.   
    y          NO     0..1     retrieves the y-position of the current pixel.  At the very top edge of the screen this would be 0; in the middle, 0.5; and at the bottom, 1.   
    rad        NO     0..1     retrives the distance of the pixel from the center of the screen.  At the center of the screen this will be zero, and at the corners, 1.  
                                  (The middle of the edges will be 0.707 (half of the square root of 2).
    ang        NO     0..6.28  retrieves the angle of the current pixel, with respect to the center of the screen.  
                                  If the point is to the right of the center, this is zero; above it, it is PI/2 (1.57); to the left, it is PI (3.14); and below, it is 4.71 (PI*3/2).  
                                  If it is just a dab below being directly to the right of the center of the screen, the value will approach 6.28 (PI*2).  
                                  (note: this is simply the arctangent of y over x, precomputed for you.)
    
    zoom       yes    >0       controls inward/outward motion.  0.9=zoom out 10% per frame, 1.0=no zoom, 1.1=zoom in 10%
    zoomexp    yes    >0       controls the curvature of the zoom; 1=normal
    rot        yes             controls the amount of rotation.  0=none, 0.1=slightly right, -0.1=slightly clockwise, 0.1=CCW
    warp       yes    >0       controls the magnitude of the warping; 0=none, 1=normal, 2=major warping...
    cx         yes    0..1     controls where the center of rotation and stretching is, horizontally.  0=left, 0.5=center, 1=right
    cy         yes    0..1     controls where the center of rotation and stretching is, vertically.  0=top, 0.5=center, 1=bottom
    dx         yes             controls amount of constant horizontal motion; -0.01 = move left 1% per frame, 0=none, 0.01 = move right 1%
    dy         yes             controls amount of constant vertical motion; -0.01 = move up 1% per frame, 0=none, 0.01 = move down 1%
    sx         yes    >0       controls amount of constant horizontal stretching; 0.99=shrink 1%, 1=normal, 1.01=stretch 1%           
    sy         yes    >0       controls amount of constant vertical stretching; 0.99=shrink 1%, 1=normal, 1.01=stretch 1%             
    
    time       NO     >0       retrieves the current time, in seconds, since MilkDrop started running
    fps        NO     >0       retrieves the current framerate, in frames per second.
    frame      NO              retrieves the number of frames of animation elapsed since the program started
    progress   NO     0..1     progress through the current preset; if preset was just loaded, this is closer to 0; if preset is about to end, this is closer to 1.
                                 -note that if Scroll Lock is on, 'progress' will freeze!

    bass       NO     >0       retrieves the current amount of bass.  1 is normal; below ~0.7 is quiet; above ~1.3 is loud bass
    mid        NO     >0         -same, but for mids (middle frequencies)
    treb       NO     >0         -same, but for treble (high) frequencies
    bass_att   NO     >0       retrieves an attenuated reading on the bass, meaning that it is damped in time and doesn't change so rapidly.
    mid_att    NO     >0         -same, but for mids (middle frequencies)
    treb_att   NO     >0         -same, but for treble (high) frequencies

    meshx      NO     8-192    tells you the user's mesh size in the X direction.  always an integer value.
    meshy      NO     6-144    tells you the user's mesh size in the Y direction.  always an integer value.
    pixelsx    NO     16-4096  width of the viz window, in pixels.  If Canvas Stretch is on, this is the pre-stretched size.  (same as "texsize.x" for shaders)
    pixelsy    NO     16-4096  height of the viz window, in pixels.  If Canvas Stretch is on, this is the pre-stretched size.  (same as "texsize.y" for shaders)
    aspectx    NO     >0     multiply an x-coordinate by this to make the preset look the same at any aspect (window height:width) ratio.
                               -value: if widescreen, 1; if window is tall, h/w.
    aspecty    NO     >0     multiply a y-coordinate by this to make the preset look the same at any aspect (window height:width) ratio.
                               -value: if widescreen, w/h; if window is tall, 1.
            
    q1         yes    any      } Used to carry values along a chain           
    q2         yes    any      }  from the preset init code,                        
    q3         yes    any      }  to the preset per-frame code, then on             
    q4         yes    any      }    to the preset per-vertex code;            
    q5         yes    any      }    or to the custom shape per-frame code,          
    q6         yes    any      }    or to the custom wave per-frame code,      
    q7         yes    any      }      then to the custom wave per-vertex code;
    ...                        }    or to the [pixel] shader code.            
    q31        yes    any      } Click here to see a diagram for the Q vars.
    q32        yes    any      } 
    
    
    The main reason for distinction between per-frame and per-vertex equations
    is simple: SPEED.  If you have a per-vertex equation that doesn't make use
    of the x, y, rad, or ang variables, then there's no reason for it to be
    executed per-vertex; it could be executed once per frame, and the result
    would be the same.  So, here's a maxim to write on the wall:
    
        "If a per-vertex equation doesn't use at least one of the variables
         { x, y, rad, ang }, then it should be actually be a per-frame 
         equation."
    
    You might be wondering how on earth all these formulas could be computed
    for every pixel on the screen, every frame, and still yield a high frame
    rate.  Well, that's the magic of the hamster.  And the fact that it really
    does the processing only at certain points on the screen, then interpolates
    the results across the space between the points.  In the config panel,
    the "mesh size" option defines how many points (in X and Y) there are at
    which the per-vertex equations are actually computed.  When you crank this
    option up, you start eating up CPU cycles rather quickly.



    
    c. VARIABLE POOLS; DECLARING YOUR OWN VARIABLES; PERSISTENCE OF VALUES
    -----------------------
    Declaring and using your own variables is easy - in some bit of code 
    (init equations, per-frame equations, etc.) you just write something like
    the following:
    
        billy = 5.3;
    
    This creates a variable called 'billy' and sets its value to 5.3.  You can
    then freely read and/or modify the value of 'billy' within that section
    of code.
    
    However, sometimes it is desireable to create (really, initialize) a variable 
    in an "init" equations, then use and/or update it in the "per-frame" equations.
    You can always do this, because paired init and per-frame equations
    share the same variable pool.  In addition, the values of user-defined
    variables will persist from frame to frame.
    
    There are three variable "pools" in MilkDrop:

      1. preset init code + preset per-frame code
      2. custom wave init + custom wave per-frame code
      3. custom shape init + custom shape per-frame code
    
    So, you can probably guess that if you declare a variable in the preset
    init code, you can then read it in the preset per-frame code.  You can
    also write to it (update it), and its value will persist to the next
    frame.  All three pools work this way.

    As explained, though, you can't read the value of 'billy' in when in another 
    variable pool.  (This is intentional, and keeps MilkDrop running nice and 
    fast.)  If you want to pass values around between variable pools, you need 
    to use a set of special variables: q1, q2, q3, etc. on up to q32.  See
    the next section for details on how they work and how to properly use them.
    Just remember: the Q variables (and later, the T variables) are the only ones 
    that you can use to "jump" between (carry values between) variable pools.
    
    You might notice that there are two other types of equations that weren't 
    listed above.  They are:
    
      * preset per-vertex code
      * custom wave per-point code
    
    For these two code sections, persistent values don't really make sense,
    because there is no way to properly initialize them.  Any user-defined
    variables in these code sections should just be treated as scratch
    variables, not persisting from frame to frame, from vertex to vertex,
    or from point to point (even though technically, they will... but it
    probably won't be what you want).  The only thing that really makes sense
    here is when you want to carry values along from point to point as
    you run the custom wave per-point code; to do this, use q1-q32.  (See
    the next section for a more detailed explanation.)  



    
    d. PRESET INIT CODE; CARRYING VALUES BETWEEN VARIABLE POOLS, USING q1-q32
    -----------------------
    As we've just seen, you can't normally pass values around between variable 
    pools.  However, there is one mechanism for bridging this gap: the 'Q'
    variables.  They are named q1, q2, q3, and so on, through q32.  Their
    main function is to bridge the gap between various variable pools.
    
    In MilkDrop 1.03 and later, you can write code that is executed only once,
    when a preset is loaded (switched to).  This 'preset initialization' code 
    does two useful things:
      
      1. It allows you to set the initial value of your own (user-defined) 
         variables (such as 'my_variable'), as just explained.  
         
      2. It allows you to write the default ("sticky") values for q1, q2, q3... 
         through q32.  Whatever these values end up at after the init code, 
         those are the values that q1-q32 will be reset to at the start of 
         each frame (...the input to the per-frame equations).  If the
         per-frame equations change the values of q1-q32, those new values will
         propagate on to other variable pools (see the diagram below), but on
         the next frame, the values will be reset to the original "sticky" 
         defaults.
         
    See the flow chart below for a brief, and complete, glance at how the values
    of the Q variables flow throughout MilkDrop.
    
    
    Let's walk through the flow of the chart.  
    
    If you write to the values of q1..q32 from the "preset init code", the values 
    you write will become the new 'base values' to which q1..q32 are initialized 
    at the start of each frame, for the per-frame code.  So when you access (read) 
    q1-q32 in the per-frame code, you'll get the values that were *initially* set -
    over and over, every frame.  You can then modify them (or not) in the per-frame 
    code, and the (possibly modified values) will then be readable by the per-vertex 
    code - as well as by all pixel shader code, and others.  However, any modified 
    values will not persist to the next frame; they will be reset again, at the 
    start of the next frame, to the values they had at the end of the preset init 
    code.

    In the per-vertex code, the q1-q32 values start (for the first vertex 
    in any frame) as the values they had at the end of the per-frame code.  If you 
    modify q1-q32 in the per-vertex code, those modified values will carry over 
    from vertex to vertex.  (This isn't a very desireable effect; you should avoid 
    writing to the Q variables from the per-vertex equations.)  Next frame, they 
    will be reset to whatever value they had at the end of the [next frame's 
    execution of the] per-frame code.  (It's all in the diagram... look at that, 
    and you'll just get it.)

    There is one trick here.  You might notice that the custom wave/shape
    init boxes are missing from the diagram.  That's because the q
    variables coming out of them don't go anywhere.  The Q values that come
    into the per-frame wave/shape equations come from the preset per-frame
    equations, as you can see.  But, just to humor you: in the wave/shape init code, 
    the Q values coming in are the results from the preset init code.  Any Q values 
    you write to there (in the wave/shape init code) will be meaningless; although
    you can write to (initialize) your own custom variables, and read those in 
    later, in the wave/shape per-frame equations!  So, really, you can still route
    data that way, if you really want to.
        
    Side note: when you edit the preset init code and apply it (by hitting 
    CTRL+ENTER), the init code will re-execute immediately.  However, when you 
    edit the regular per-frame/per-vertex code and hit CTRL+ENTER, the preset init 
    code will NOT be re-executed; the results of the last execution will persist.
    If you change per-frame/per-vertex code and want to re-execute the initialization
    code (i.e. to randomize it or reset the preset), you'll have to save the preset
    and then re-load it.

    (Historical note: nothing here has changed since MilkDrop 1; these diagrams were
    just re-designed to be much simpler to read.  Actually, there was a bug in 
    the old diagrams that is now fixed: on frame 0, they showed the Q values 
    going straight from the (frame 0!?) per-frame code, into the custom 
    wave/shape init code.  On frame 0, those Q values actually come straight from 
    the preset init code.  HOWEVER, they are virtually useless, as discussed above.)



    
    e. CUSTOM SHAPES AND WAVES
    ----------------------
    As of MilkDrop 1.04, two new features are available: custom shapes, and custom 
    waves.  A preset can have up to 4 of each.  
    
    With custom shapes, you can draw an n-sided shape (with 3-100 sides) anywhere 
    on the screen, at any angle and size, in any color, and at any opacity.  You 
    even have the option to map the previous frame's image onto the shape, which 
    makes for some incredible possibilities (such as realtime hardware fractals - 
    see the 'Geiss - Feedback' preset).  You can also write per-frame code to 
    control all of these things about the shape(s).  This way, they can react to
    the audio or change over time - whatever you can imagine.  You are limited to
    four custom shapes per preset, however, each one of those can be instanced,
    which lets you draw a huge number (up to 1024) of them each frame, if you 
    want to, and each one can be totally different (as long as the value of
    the 'instance' variable ends up influencing the other properties).
    
    With custom waves, you can draw the waveform (or the frequency spectrum)
    wherever, whenever, and however you want; a great addition since MilkDrop 
    1.03, where only the built-in waveforms were possible.  With custom waves
    you can also write per-frame code to control the waves, and per-point code
    to place every point (or line segment) on the wave exactly where you want,
    and in exactly the color you want, and so on.

    Remember those q1-q32 variables that were committed at the end of the preset
    initialization code, then reset (to those values) at the beginning of each
    frame, and then (potentially) modified in the preset per-frame code?  Those
    (potentially modified) values of q1-q32 - as they were at the end of the
    preset's per-frame code, each frame - are piped into the custom wave & custom 
    shape per-frame code.  So if you read 'q3' in the custom wave per-frame 
    code, what you're really reading is the value of 'q3' as it was left at the 
    end of this frame's per-frame code.  Again, see the q_vars.gif image 
    for a diagram of the flow of the values of the q1-q32 varibles.

    For custom waves and shapes, you can modify q1-q32, if you like, in the per-
    frame equations.  As usual, the values of the Q variables will not persist 
    from frame to frame, though - they are reset on each new frame, to match
    the values they had at the end of the *preset's* per-frame code, this frame. 
    
    For custom waves, you also have one more link in the chain: per-point
    (aka per-vertex) code.  This code is executed once for each data point in the 
    waveform.  The initial values of q1-q32 coming in (for the first point)
    are the values that stood at the end of the custom wave per-frame code,
    this frame.  If you then modify q1-q32 in the per-point code (or even if you
    don't), the values will pass on to the next point.  You could, for example, 
    smooth out a waveform using this.

    THE 'T' VARIABLES
    ----------------------
    There are 8 additional variables available for custom waves and shapes:
    t1-t8.  These are very similar to the Q variables, but they exist only
    for custom waves & shapes.  To see how the data flows from variable pool
    to variable pool for the T vars, take a look at the diagram below.  Like
    the Q variables, they exist to help you bridge some gaps between variable
    pools.  However, the T variables are a bit simpler to understand than the 
    Q's.  The diagram below should explain it all.
    
    
    


    CUSTOM SHAPE PER-FRAME VARIABLES
    ----------------------
        NAME    WRITABLE? RANGE    DESCRIPTION
        ----    --------- -----    -----------                                                                   
        num_inst   no     1-1024   The total # of instances (the number of times to repeat the per-frame equations for, & draw, this shape).
        instance   no     0..num_inst-1   The current instance number that the equations are being executed for.
        sides      yes    3-100    the default number of sides that make up the polygonal shape
        thick      yes    0/1      if ON, the border will be overdrawn 4X to make it thicker, bolder, and more visible
        additive   yes    0/1      if ON, the shape will add color to sature the image toward white; otherwise, it will replace what's there.
        x          yes    0..1     default x position of the shape (0..1; 0=left side, 1=right side)
        y          yes    0..1     default y position of the shape (0..1; 0=bottom, 1=top of screen)
        rad        yes    0+       default radius of the shape (0+)
        ang        yes    0..6.28  default rotation angle of the shape (0...2*pi)
        textured   yes    0/1      if ON, the shape will be textured with the image from the previous frame
        tex_zoom   yes    >0       the portion of the previous frame's image to use with the shape
        tex_ang    yes    0..6.28  the angle at which to rotate the previous frame's image before applying it to the shape
        r          yes    0..1     default amount of red color toward the center of the shape (0..1)
        g          yes    0..1     default amount of green color toward the center of the shape (0..1)
        b          yes    0..1     default amount of blue color toward the center of the shape (0..1)
        a          yes    0..1     default opacity of the center of the shape; 0=transparent, 1=opaque
        r2         yes    0..1     default amount of red color toward the outer edge of the shape (0..1)
        g2         yes    0..1     default amount of green color toward the outer edge of the shape (0..1)
        b2         yes    0..1     default amount of blue color toward the outer edge of the shape (0..1)
        a2         yes    0..1     default opacity of the outer edge of the shape; 0=transparent, 1=opaque
        border_r   yes    0..1     default amount of red color in the shape's border (0..1)
        border_g   yes    0..1     default amount of green color in the shape's border (0..1)
        border_b   yes    0..1     default amount of blue color in the shape's border (0..1)
        border_a   yes    0..1     default opacity of the shape's border; 0=transparent, 1=opaque

        time       NO     >0       retrieves the current time, in seconds, since MilkDrop started running
        fps        NO     >0       retrieves the current framerate, in frames per second.
        frame      NO              retrieves the number of frames of animation elapsed since the program started
        progress   NO     0..1     progress through the current preset; if preset was just loaded, this is closer to 0; if preset is about to end, this is closer to 1.
                                     -note that if Scroll Lock is on, 'progress' will freeze!

        bass       NO     >0       retrieves the current amount of bass.  1 is normal; below ~0.7 is quiet; above ~1.3 is loud bass
        mid        NO     >0         -same, but for mids (middle frequencies)
        treb       NO     >0         -same, but for treble (high) frequencies
        bass_att   NO     >0       retrieves an attenuated reading on the bass, meaning that it is damped in time and doesn't change so rapidly.
        mid_att    NO     >0         -same, but for mids (middle frequencies)
        treb_att   NO     >0         -same, but for treble (high) frequencies

        q1         yes    any      } Used to carry values along a chain                                         
        q2         yes    any      }  from the preset init code,                                                
        q3         yes    any      }  to the preset per-frame code, then on                                     
        q4         yes    any      }    to the preset per-vertex code;                                          
        q5         yes    any      }    or to the custom shape per-frame code,                                  
        q6         yes    any      }    or to the custom wave per-frame code,                                   
        q7         yes    any      }      then to the custom wave per-vertex code;                              
        ...                        }    or to the [pixel] shader code.                                          
        q31        yes    any      } Click here to see a diagram for the Q vars.
        q32        yes    any      } 

        t1         yes    any      } Used to carry information                                                  
        t2         yes    any      }  from the custom shape init code                                           
        t3         yes    any      }    to the custom shape per-frame code.                                       
        t4         yes    any      } Click here to see a diagram for the T vars.
        t5         yes    any      } 
        t6         yes    any      } 
        t7         yes    any      } 
        t8         yes    any      } 
                                     
    
    CUSTOM WAVE PER-FRAME VARIABLES
    ---------------------
        NAME   WRITABLE?  RANGE    DESCRIPTION
        ----   ---------  -----    -----------                                                                   
        r          yes    0..1     base amount of red color in the wave (0..1)
        g          yes    0..1     base amount of green color in the wave (0..1)
        b          yes    0..1     base amount of blue color in the wave (0..1)
        a          yes    0..1     base opacity of the waveform; 0=transparent, 1=opaque
        samples    yes    0-512    read: retrieves the # of samples specified for this custom wave (from the menu).
                                   write: lets you dynamically change that #, frame to frame.

        time       NO     >0       retrieves the current time, in seconds, since MilkDrop started running
        fps        NO     >0       retrieves the current framerate, in frames per second.
        frame      NO              retrieves the number of frames of animation elapsed since the program started
        progress   NO     0..1     progress through the current preset; if preset was just loaded, this is closer to 0; if preset is about to end, this is closer to 1.
                                     -note that if Scroll Lock is on, 'progress' will freeze!

        bass       NO     >0       retrieves the current amount of bass.  1 is normal; below ~0.7 is quiet; above ~1.3 is loud bass
        mid        NO     >0         -same, but for mids (middle frequencies)
        treb       NO     >0         -same, but for treble (high) frequencies
        bass_att   NO     >0       retrieves an attenuated reading on the bass, meaning that it is damped in time and doesn't change so rapidly.
        mid_att    NO     >0         -same, but for mids (middle frequencies)
        treb_att   NO     >0         -same, but for treble (high) frequencies

        q1         yes    any      } Used to carry values along a chain                                         
        q2         yes    any      }  from the preset init code,                                                
        q3         yes    any      }  to the preset per-frame code, then on                                     
        q4         yes    any      }    to the preset per-vertex code;                                          
        q5         yes    any      }    or to the custom shape per-frame code,                                  
        q6         yes    any      }    or to the custom wave per-frame code,                                   
        q7         yes    any      }      then to the custom wave per-vertex code;                              
        ...                        }    or to the [pixel] shader code.                                          
        q31        yes    any      } Click here to see a diagram for the Q vars.
        q32        yes    any      } 
    
        t1         yes    any      } Used to carry information                                                  
        t2         yes    any      }  from the custom wave init code,                                           
        t3         yes    any      }    to the custom wave per-frame code,                                      
        t4         yes    any      }      then on to the custom wave per-point code                             
        t5         yes    any      }      (and from point to point, too, if you write                           
        t6         yes    any      }      to the values from the per-point equations).                          
        t7         yes    any      } Click here to see a diagram for the T vars.
        t8         yes    any      } 
    
       
    CUSTOM WAVE PER-POINT (aka PER-VERTEX) VARIABLES
    ---------------------
        NAME   WRITABLE?  RANGE    DESCRIPTION
        ----   ---------  -----    -----------                                                                   
        x          yes    0..1     the x position of this point that makes up the wave (0=left, 1=right)
        y          yes    0..1     the y position of this point that makes up the wave (0=bottom, 1=top)
        sample     no     0..1     how far along we are, through the samples that make up the waveform: 0=first sample, 0.5 = half-way through; 1=last sample.
        value1     no     any      the value of the Left audio channel sample at this point in the waveform (or freq. spectrum).
        value2     no     any      the value of the Right audio channel sample at this point in the waveform (or freq. spectrum).
        r          yes    0..1     amount of red color in this point of the wave (0..1)
        g          yes    0..1     amount of green color in this point of the wave (0..1)
        b          yes    0..1     amount of blue color in this point of the wave (0..1)
        a          yes    0..1     opacity of this point of the waveform; 0=transparent, 1=opaque

        time       NO     >0       retrieves the current time, in seconds, since MilkDrop started running
        fps        NO     >0       retrieves the current framerate, in frames per second.
        frame      NO              retrieves the number of frames of animation elapsed since the program started
        progress   NO     0..1     progress through the current preset; if preset was just loaded, this is closer to 0; if preset is about to end, this is closer to 1.
                                     -note that if Scroll Lock is on, 'progress' will freeze!

        bass       NO     >0       retrieves the current amount of bass.  1 is normal; below ~0.7 is quiet; above ~1.3 is loud bass
        mid        NO     >0         -same, but for mids (middle frequencies)
        treb       NO     >0         -same, but for treble (high) frequencies
        bass_att   NO     >0       retrieves an attenuated reading on the bass, meaning that it is damped in time and doesn't change so rapidly.
        mid_att    NO     >0         -same, but for mids (middle frequencies)
        treb_att   NO     >0         -same, but for treble (high) frequencies

        q1         yes    any      } Used to carry values along a chain                                         
        q2         yes    any      }  from the preset init code,                                                
        q3         yes    any      }  to the preset per-frame code, then on                                     
        q4         yes    any      }    to the preset per-vertex code;                                          
        q5         yes    any      }    or to the custom shape per-frame code,                                  
        q6         yes    any      }    or to the custom wave per-frame code,                                   
        q7         yes    any      }      then to the custom wave per-vertex code;                              
        ...                        }    or to the [pixel] shader code.                                          
        q31        yes    any      } Click here to see a diagram for the Q vars.
        q32        yes    any      } 

        t1         yes    any      } Used to carry information                      
        t2         yes    any      }  from the custom wave init code,               
        t3         yes    any      }    to the custom wave per-frame code,          
        t4         yes    any      }      then on to the custom wave per-point code
        t5         yes    any      }      (and from point to point, too, if you write
        t6         yes    any      }      to the values from the per-point equations).
        t7         yes    any      } Click here to see a diagram for the T vars.
        t8         yes    any      } 

       

    
    f. PIXEL SHADERS
    ----------------------
    The world of realtime computer graphics made a huge stride around 2002-2003,
    with the advent of pixel shaders.  Lots of people want to learn how to
    use pixel shaders; writing presets for MilkDrop is a great way 
    to learn them, because you get to see the effects of your code instantly,
    on the screen.
    
    MilkDrop 1 ran on what is called the "fixed function" graphics pipeline.
    That meant that certain common graphics operations - and very few of them -
    could be executed for each pixel.  You could do a few things - maybe multiply
    by a texture or a color, then maybe one more simple operation - but that was about it.  
    
    Newer presets (MilkDrop 2 and later) can take advantage of programmable 
    pixel shaders.  GPUs (graphics processing units) are now capable of
    executing dozens, even thousands (on more expensive hardware) of instructions 
    per pixel.  To tell the GPU what to do at each pixel, you write some code
    called a "pixel shader".  It looks a lot like C, except you'll see 
    the types float3 (...often representing a color, or maybe a 3D coordinate), 
    as well as float2 and float4, as often as you'll see the simple 
    "float" type.  There is also a lot of emphasis on sampling from textures.
    Textures can either be procedural (like the image from the previous
    frame, or a nicely gaussian-blurred version of it, or a procedurally-
    generated noise texture), or they can be loaded from disk.  To sample
    from a texture on disk (...but cached in video memory, of course), 
    in the shader, you simply specify the name of the image file you want to load,
    and how you want to sample it (what kind of filtering & wrapping) as well as
    where (the UV coordinates, like XY coordinates, always in the [0..1] range).
    It reads the sample (as a float4 - some image formats have four channels
    instead of just r/g/b).  You can then do whatever you like (mathematically)
    with that sample, take other samples, combine them, and so on.  The final
    output of the shader is always a color value, and it is this color value
    that is written to the render target (an internal texture, or the screen).
    
    
    
    SHADER MODELS - 2.0, 3.0, etc.
    ------------------------------
    Since pixel shaders were born, there have been a few revisions.  Each new
    model has more capabilities than the last.  
    
    MilkDrop 1 only supports fixed-function graphics - i.e. no pixel shaders.
    MilkDrop 2 supports shader model 2 at the lowest level.  (If your GPU
    doesn't support this, MilkDrop 2 should still run - it just won't show
    you any presets that use pixel shaders.)  Shader model 2 has a limit of
    64 instructions (per shader), though.  
    
    Presets can be authored to use Shader Model 3, however.  This shader
    model is not as widely supported (...so be careful writing presets for
    it - half of the GPUs out there don't support it yet, so the preset
    won't show up in the preset list on those computers).  However, it is
    much more powerful, with a virtually unlimited number of instructions.
    (You're just limited by the speed of your GPU and the number of pixels
    you need to draw each frame!)  On a GeForce 8000-series, believe it
    or not, you can easily achieve smooth framerates running shaders with 
    THOUSANDS of instructions!
    
    Shader Model 4.0 also exists, but only in DirectX 10; and DirectX 10
    is only available with Windows Vista.  Because not many people have
    Vista yet, we've decided to wait (a damn long time) until going down
    that path.  Shader Model 3 has virtually everything we need in it
    anyway.  



    PRESET FILE VERSIONS & COMPATIBILITY
    ------------------------------------
    Note that if you load a MilkDrop 1 preset, you can save it back to disk
    (even after changing code, variables, etc.) and it will still be readable
    by MilkDrop 1.  Only if you select the menu option to "Upgrade [its] 
    Pixel Shader Version" will you be making it no longer backwards-compatible.
    Once you've done this, though, you'll notice that the menus look slightly
    different - some new shader-based options will appear, and some old stuff
    (video echo, gamma, etc. - all things that are now folded into the 
    composite shader) are all gone.  You'll also notice that two nice little
    default shaders (warp and composite) have been written for you, and that 
    the relevant values and options from the old preset (gamma, decay, video 
    echo, texture wrap, etc.) have all been set correctly in the new shaders, 
    so that the preset does exactly what it did before.  The only difference 
    is that now, the preset takes advantage of the full programmability of 
    pixel shaders (and you have a lot of freedom to tweak it), instead of 
    being restricted by the highly restrictive DX8 fixed-function graphics 
    pipeline.
    
    Some of the mash-up functions (discussed later) will mix old and new
    presets together.  In this case, the newly-created preset file will only
    look correct on MilkDrop 1.xx if it uses neither a warp nor composite shader.
    It will still run in MilkDrop 1, but without shaders, so whatever random 
    values gamma, video echo, etc. were left at, will all kick back in.

    One last note: keep in mind that MilkDrop 2 is smart enough to not show
    you any presets that your GPU can't support.  MilkDrop 1, though, isn't
    so smart - it will let you look at MilkDrop 2 presets.  It will 
    ignore all the shader stuff, and probably not display correctly, though.


    
    A PIXEL SHADER - CONCEPTUAL OVERVIEW
    -------------------------------------
    Games are what have driven the Hardware Graphics revolution, and games
    work by projecting many thousands of 3D triangles onto your screen and
    rasterizing (pixelizing) & shading them.  In MilkDrop, also, 
    your graphics processing unit (GPU) is told to draw many triangle onto 
    your screen.  Each is described by three vertices (points).  The interior 
    of the triangle is a bunch of pixels.  The GPU runs your "shader" code 
    on each pixel to determine how to shade the pixel - i.e., light it, 
    or determine its color.  (The terminology is more geared toward the
    idea that these triangles were originally in 3D and require realistic
    lighting and shading.)
    
    In MilkDrop, the shaders are run on a dumb, regular grid of triangles 
    that covers the entire visualizer window.  The results of the preset's 
    per-vertex equations are interpolated across the face of each of these 
    triangles, and your pixel shader will see the interpolated results.  
    They come in in the form of "UV" coordinates - they tell you where 
    to sample (read) the source image, in order to create the desired warping
    effect each frame - the long-term effect of which is to create perceived
    motion. 
    
    You can then sample that image (or others), do some math on the result,
    sample some other textures, do some more math, etc.  By the end of 
    the shader, whatever value is in "ret" (a float3 - three floating-point
    values) is the color that will be written for that pixel.
    
    Each preset in MilkDrop 2 has two pixel shaders: the warp shader,
    which warps the image from frame to frame, and the composite shader,
    which draws the frame to the screen (with or without special effects).
    
    To edit or experiment with these shaders, while MilkDrop is running, 
    hit 'M' to view the preset editing menu.  The scroll down to either 
        [edit warp shader]
    or 
        [edit composite shader] 
    and hit ENTER.  If you don't see either of these options, it means 
    the current preset is an old MilkDrop 1 preset; in this case, you can 
    either try a different preset, or you can upgrade the current preset 
    by selecting 

        update preset's pixel shader version

    toward the bottom of the menu.  Keep in mind that if you upgrade
    a preset's pixel shader version and then save it to disk, it might 
    not be usable anymore on other computers with older graphics chips.

    Now go edit one of the two shaders.  Once you're in there, editing,
    hit F9 - this will toggle the onscreen quick reference for writing
    shaders.  It's very handy.  Press F9 again to hide it.
    
    
    
    
    WARP SHADER
    ----------------
    Here is an example of a simple WARP shader.  It is run over every pixel of
    the internal canvas, with the output being back to the canvas itself (it's
    a double-buffered texture).  Any special effects that happen here get "baked" 
    into the image, and will persist into the next frame.
        
        shader_body
        {
            // sample a pixel from the previous frame.  
            // uv coord is slightly warped (driven by the per-vertex equations),
            //   and is what creates the main "movement" in our preset.
            ret = tex2D( sampler_main, uv ).xyz;

            // darken over time
            ret *= 0.97;
        }

    There are only two instructions here... sample the old frame, and 
    darken the old color value (color values are always in the 0..1 range)
    to prevent the screen from turning white over time.
    
    This code is run on every pixel on the screen.  If the UV's coming in
    were just [0..1] on X and Y, corresponding exactly to the location of
    the pixel on the screen, there would be no movement (or warp).  
    What creates the warp is that the UV coordinates are slightly "off".
    Each frame, MilkDrop executes the per-vertex equations for the current 
    preset at all the vertices on a grid covering the screen.  The resulting
    UV coordinates are then interpolated (by the GPU) between the vertices,
    and this shader code is executed at each pixel, with the UV coordinates
    smoothly interpolated for you to do your sampling.  Note that the 
    original, un-distorted UV coordinates are always available in uv_orig.
    If the preset had no motion in it, or if we used uv_orig instead of uv, 
    we would just see pixels getting darker over time, with no apparent motion.
    
    Note that MilkDrop's internal canvas (texture) can only store colors
    in the [0..1] range, so if your shader outputs values beyond that range,
    the values will be clipped to 0 or 1.  Within the body of the shader,
    you can go nuts, using any number ranges you want; this restriction only
    applies to the final output.
    
    Note that there are several ways to darken pixels over time, and the 
    color precision (8 bits per color channel, or 256 shades, or [0..1] 
    in increments of 0.004) means you have to be careful about darkening 
    the color over time.  If you're going to darken using this:

        ret *= 0.97;

    then you shouldn't use a multiplier above 0.98, because, due to precision,
    dark-ish pixels will never become fully dark.  Another way to do it
    is this: 

        ret -= 0.004;

    The above darkening method will make the pixels go dark, although, 
    sometimes too quickly.  One way around this is to use error diffusion 
    dithering (discussed later in this guide).  
    
    Probably the best thing is to combine the two:

        ret = (ret - 0.002)*0.99;

    This gives you a partially constant, partially linear darkening effect,
    and it tends to look the best.  Tweak the values as needed.

    
    
    
    COMPOSITE SHADER
    ----------------
    Here is an example of a simple COMPOSITE shader.  It is run over every
    pixel in the visualizer window, the output being the actual screen that
    you see.  Anything you do here will NOT affect the subsequent frame - 
    it will only affect the display of the current frame.
        
        shader_body
        {
            // sample the corresponding pixel from the internal rendering canvas
            // note that, here, 'uv' is undistorted.
            // in the warp shader, 'uv' is warped, and 'uv_orig' is undistorted!
            ret = tex2D(sampler_main, uv).xyz;
            
            // make it a little bit "overbright"
            ret *= 1.8;
        }

    The composite shader is easy to understand.  We just sample the
    internal canvas at the uv coords (undistorted here - but we could
    play with them if we want!), and manipulate the result if we want
    (here we brighten it a bit).  The "overbrightening" here is nice because 
    pixels in the brighter ranges will (for display to the user only)
    wash out to a white color; however, they can stay that way
    for a bit.  If we just displayed the color as-is here, and 
    instead drew our waveforms twice as bright, they would likely
    start out at white but very quickly fade to shades of grey.
    
    Note that we could do other fancy stuff here instead, like:
            
            float2 uv_flipped = 1 - uv;    // '1' auto-replicates to float2(1,1)
            ret = max( tex2D(sampler_main, uv).xyz, 
                       tex2D(sampler_main, uv_flipped).xyz );
            ret = pow(ret, float3(0.5, 1, 2));
            
    This would flip the image about its diagonal, always show you
    the brighter pixel from the two orientations, and then ramp
    the R/G/B channels at different exponents to create a bit of 
    a cepia color tone.  Not too tough!
    
    Now that you have an understanding of what the two shaders do,
    let's look at all the intrinsic types and operators you can use
    in shaders.
   
    
    
    PIXEL SHADER REFERENCE
    ----------------------
    Here is a list of all the shader functions and operations at your disposal.

    Data types
    ----------
      float       1-4 component full-precision floating-point values.
      float2        Use these for most things except color values.
      float3        (When working with UV coords, time values, or big ranges 
      float4        of values, for example.)
      
      half        1-4 component half-precision floating-point values.
      half2         Much faster on some older hardware; although drivers usually 
      half3         automatically substitute the 'half' type on you (behind your back) 
      half4         wherever it is prudent.  Use 'half' for color values, or other 
                    computations where precision is largely unimportant.
      
      float2x2    2d transformation matrix.  (Rotate and/or scale.)
      float3x2    2d transformation matrix.  (Rotate, scale, translation.)
      float3x3    3d transformation matrix.  (Rotate and/or scale.)
      float4x3    3d transformation matrix.  (Rotate, scale, translation.)

    Operators  
    ----------
      + - * /     typical arithmetic operators.
      
      a += b      same as "a = a + b".  Also valid:  -=  *=  /=
      
      ==          equality test.
      <           less than.
      <=          less than or equal to.
      >           greater than.
      >=          your mom is soo fat.
      
      var.x       swizzle operators.  You can stick a dot after any variable
      var.y       and put up to four letters after it.  If the variable is
      var.z       a float4, you can choose from x, y, z, and w; if it's a float2,
      var.w       just x and y; and so on.  The data type yielded can be different 
      var.xy      than the input, and is determined by the number of letters after 
      var.wzxy    the dot, and which fields (from the input) you chose.
      etc.        For example, if you had:
                    float  alpha = 104.37;
                    float2 bravo = float2(1,2);
                    float3 chuck = float3(10,20,30);
                    float4 delta = float4(5,6,7,8);
                  Then these swizzles would yield:
                    alpha.xxx  ->  float3(104.37, 104.37, 104.37)
                    bravo.yx   ->  float2(2,1)
                    chuck.z    ->  30
                    delta.wywy ->  float4(8,6,8,6)

    Preprocessor
    ------------
      If you're familiar with C/C++, you can use simple things like
      #define, #if (condition) / #endif, #if / #elif/#else / #endif, and so on.
      
    
    Intrinsic Instructions
    ----------------------
    Unless otherwise noted, these instructions all work on float, float2, float3, 
    or float4 operands.
    
    math operations
    ---------------
    abs(a)        Absolute value.  Returns max(a, -a).
    frac(a)       Fractional value.  Returns (a - (int)a).  (the part after the decimal)
    floor(a)      Floor.  Returns ((int)a).  (the part before the decimal)
                    Only works on single floats.
    saturate(a)   Clamps a to the [0..1] range.  Often FREE (costs no extra instructions).
    max(a,b)      Returns the greater of each component between a and b.
    min(a,b)      Returns the lesser of each component between a and b.
    sqrt(a)       Returns square root of input(s).  Input should be >= 0.  Output always positive.
    pow(a,b)      Returns a^b.  b can be same type as a, or just a scalar (single float).
    exp(a)        Returns 2^a.
    log(a)        Returns log2(a).
    lerp(a,b,c)   Linear interpolate... blends from a to b based on the value of c[0..1].
                    (Or extrapolates, if c is outside [0..1] range.)
                    a and b must be same type; can can be that same type, or just float.
                    Returns a + c*(b-a).  Return type is same as a and b.
    dot(a,b)      Dot product.  All versions return A SINGLE FLOAT.
                    dot(float  a, float  b) returns a+b.
                    dot(float2 a, float2 b) returns a.x*b.x + a.y*b.y.
                    dot(float3 a, float3 b) returns a.x*b.x + a.y*b.y + a.z*b.z.
                    dot(float4 a, float4 b) returns a.x*b.x + a.y*b.y + a.z*b.z + a.w*b.w.
    lum(a)        Converts a color (float3) to greyscale, or "luminance", for the human eye.
                    Returns dot(a, float3(0.32,0.49,0.29)).
                    Tip: oversaturate a color using "col = lerp(lum(col), col, 2);"
    length(a)     Input is float2, float3, or float4 vector; returns the length of the vector.
                    Returns sqrt(
    normalize(a)  Input is float2, float3, or float4 vector; normalizes it to unit length (1.0).
                    Returns a / length(a).

    texture operations
    ------------------
    tex2D(sampler_name, uv)  
                  Samples a 2D texture at the coordinates 'uv', where UV is a float2.
                    Returns a float4 (r,g,b,alpha).
    
    tex3D(sampler_name, uvw)  
                  Samples a volume (3D) texture at the coordinates 'uvw', where UVW is a float3.
                  You could use this to sample a built-in "noise volume" or a volume texture 
                    from a .DDS texture (that holds a 3D texture).
                    Returns a float4 (r,g,b,alpha).

    GetBlur1(uv)  Samples a slightly-blurred version of the main texture 
                    (internal canvas).  Input is float2; outputs (returns) a float3.
    GetBlur2(uv)  Samples a more-blurred version. 
    GetBlur3(uv)  Samples a very blurry version.
    

    mega-slow operations
    --------------------
    sin(a)        Returns cos(a), where a is in radians.  Output is in -1..1 range.
                    SLOW - use with care.
    cos(a)        Returns sin(a), where a is in radians.  Output is in -1..1 range.
                    SLOW - use with care.
    atan2(y,x)    Returns the arctangent of y/x.  In english, this means that if you give
                    it a Y and X coordinate (with the origin at zero), it will tell you
                    the angle you are at, with respect to the origin.  The signs of x and y 
                    are used to determine the quadrant of the return values in the range 
                    [-pi, pi].  atan2 is well-defined for every point other than the origin.
                    You basically always want to use it like this:
                        float2 uv2 = (uv-0.5)*aspect.xy;  // widescreen- or 4:3-friendly
                        float ang = atan2(uv2.y,uv2.x);
                    SLOW - use with care.
    mul(a,b)      Multiplies a vector and a matrix together.  You can treat the matrix
                    as row-major or column-major based on whether you do mul(vec,mat) 
                    or mul(mat,vec).
    cross(a,b)    Cross product.  Returns (a.yzx*b.zxy - a.zxy*b.yzx).  
                    Input and output must be float3's.
                    Slow - use with care.
    if (a == b)   'If' blocks work in pixel shaders, although they can be very slow;
    {               the full code is always executed, whether the branch is taken or not.
      ...           You can use the equality operator, == (note the two equals signs! 
    }               very important!) or the >, >=, <, or <= comparators.
    else 
    { 
      ... 
    }
         
    Keep in mind that cos(), sin(), and atan2() are incredibly slow (~8 instructions).  
    Almost everything else (even divide, taking a reciprocal square root, etc.) is 1 
    or maybe, at most, 2 instructions.
              
    Note that the saturate() instruction, as well as multiplying by 2, 4, or 8, 
    or dividing by 2, 4, or 8, is a free operation on many GPUs.  And the ALUs
    inside a GPU almost always do a multiply + add (both) in a single instruction.
    
    Also, you can divide by an integer constant without suffixing it with ".0"; 
    in C/C++, "float x = 1/5;" will give you ZERO; but in shader language, it
    will give you what you expect: 0.2.

    
    
    PER-VERTEX SHADER INPUTS
    ------------------------
    
    Warp shader:
    
      float2 uv;          // .xy = warped UV coords, ~[0..1]
      float2 uv_orig;     // .xy = original (un-warped) UV coords. [0..1]
      float  rad;         // radius of the current pixel from center of screen [0..1]
      float  ang;         // angle of the current pixel from center of screen [0..2*PI]
    
    Composite shader:
    
      float2 uv;          // .xy = [un-warped] UV coords.
      float  rad;         // radius of the current pixel from center of screen [0..1]
      float  ang;         // angle of the current pixel from center of screen [0..2*PI]
      float3 hue_shader;  // .xyz = a color that varies across the screen 
                          //          (the old 'hue shader' effect from MilkDrop 1).
    
    Note that for both shaders, the vertex-interpolated angle value (ang) 
    gets a bit wonky near the center of the screen, where it is very difficult to 
    interpolate well (because it wraps suddenly from 0 to PI*2 at 9 o'clock on your 
    screen).  If you see artifacts due to this, just use
    
      float better_ang = atan2(uv.y - 0.5, uv.x - 0.5);
      
    It's very slow, but will give you perfect results.  Also, if you want a slightly
    higher-quality value for the radius, use:
    
      float better_rad = length(uv - 0.5);
      
    The unwarped UV values will always be of impeccable quality, though, 
    because they will be interpolated in the direction that they vary, 
    and the rectilinear mesh is aligned perfectly for this.
    
    
    
    PER-FRAME SHADER INPUTS
    -----------------------
    MilkDrop feeds lots of data into the the shaders.  Here is a list of everything
    that the shaders can access.
    
      float4 rand_preset;  // 4 random floats [0..1], updated once per preset
      float4 rand_frame;   // 4 random floats [0..1], updated each frame
      float  time;         // the time, in seconds, starting at zero when the *preset* starts.  
                           //   (wraps back to zero after 10,000 seconds locked on a single preset.)
      float  fps;          // the current framerate (frames per second).
      float  frame;        // the current frame #.
      float  progress;     // the progress through the current preset.  [0..1]
      
      float  bass;         // immediate info about audio levels,
      float  mid;          //  just like in the per-frame equations,
      float  treb;         //   etc.
      float  vol;          // 
      float  bass_att;     // slightly dampened info about audio levels.
      float  mid_att;      //  look at bass/bass_att, for example;
      float  treb_att;     //   if it's >1, then the bass is spiking.
      float  vol_att;      // 
      
      float4 aspect        // .xy: multiplier to use on UV's to paste an image fullscreen, *aspect-aware*; .zw = inverse.
      float4 texsize       // info about the size of the internal canvas, in pixels.
                           //   .xy = (width,height); .zw = (1/(float)w, 1/(float)h)
      
      // here are some values that roam around in the [0..1] range at varying speeds.
      float4 slow_roam_cos // .xyzw ~= 0.5 + 0.5*cos(time * float4(~0.005, ~0.008, ~0.013, ~0.022))
      float4 roam_cos      // .xyzw ~= 0.5 + 0.5*cos(time * float4(~0.3, ~1.3, ~5, ~20))           
      // here are the corresponding sine values, in case you want them.
      // pick a cos/sin pair and use the same accessor on it (.x, .z, etc.)
      // to get plot a point making a circle over time.
      float4 slow_roam_sin // .xyzw ~= same, but using sin()                                       
      float4 roam_sin      // .xyzw ~= same, but using sin()                                       
      // of course, if you want anything more complicated, just generate it
      // yourself in the per-frame equations, save it in q1-q32, and it will
      // be available to your shaders!

      float  q1;           // The values of the q1-q32 variables, 
      float  q2;           //  as output by the preset's per-frame equations.
      //...                //
      float  q31;          //
      float  q32;          //
      
      float4 _qa;          // q1-q4    The values of the q1-q32 variables,
      float4 _qb;          // q5-q8     grouped into float4's 
      float4 _qc;          // q9-q12     for more convenient access.
      float4 _qd;          // q13-q16
      float4 _qe;          // q17-q20
      float4 _qf;          // q21-q24
      float4 _qg;          // q25-q28
      float4 _qh;          // q29-q32
      
      float  blur1_min     // these are the values of the min/max
      float  blur1_max     //  allowable color values for the 3 blur passes,
      float  blur2_min     //   as set from the onscreen menus.
      float  blur2_max     //    more info below.
      float  blur3_min     // 
      float  blur3_max     // 
      
      // note/warning: in general, don't use the current time value
      // as an input to the *dynamic* rotations; as time gets large,
      // the results will become total chaos.
      float4x3 rot_s1;  // four random, static rotations.  
      float4x3 rot_s2;  //  randomized @ preset load time.
      float4x3 rot_s3;  //   minor translation component (<1).
      float4x3 rot_s4;
      
      float4x3 rot_d1;  // four random, slowly changing rotations.
      float4x3 rot_d2;  
      float4x3 rot_d3;
      float4x3 rot_d4;
      
      float4x3 rot_f1;  // faster-changing.
      float4x3 rot_f2;
      float4x3 rot_f3;
      float4x3 rot_f4;
      
      float4x3 rot_vf1;  // very-fast-changing.
      float4x3 rot_vf2;
      float4x3 rot_vf3;
      float4x3 rot_vf4;
      
      float4x3 rot_uf1;  // ultra-fast-changing.
      float4x3 rot_uf2;
      float4x3 rot_uf3;
      float4x3 rot_uf4;
      
      float4x3 rot_rand1; // random every frame
      float4x3 rot_rand2;
      float4x3 rot_rand3;
      float4x3 rot_rand4;


    
    TEXTURE SAMPLING
    ----------------
    We've already used one texture: the internal canvas, also called "Main".
    Because it's always being used, you don't have to declare it.  You can
    just sample it.  However, you have some options for how to sample it.
    There are four samplers tied to the Main canvas:
      
                                                 BEHAVIOR OUTSIDE 
        SAMPLER NAME       FILTERING METHOD      [0..1] UV RANGE
        ------------       ----------------      ----------------
        sampler_fw_main*   bilinear filtering    wrap
        sampler_fc_main    bilinear filtering    clamp
        sampler_pw_main    point sampling        wrap
        sampler_pc_main    point sampling        clamp
        
        * you can also just use "sampler_main" for this one,
          since it's by far the most common.
      
    When you go to sample a texture, the GPU finds the exact spot
    in the texture that the UV coordinates point to.  The chances
    are good that it falls in between 4 texels (pixels) rather than
    perfectly on one of them.  If you use bilinear filtering to 
    sample, it will return a properly-weighted average of the four 
    pixels.  If you use point sampling, it will just return the 
    nearest single pixel (also called "nearest neighbor").
    
    Wrap vs. clamp is also pretty simple: if you specify a UV coord
    of float2(-0.1, 0.5), the wrap mode would map this to (0.9, 0.5),
    while the clamp mode would clamp it at (0.0, 0.5).  Wrap mode
    tends to create tiled images, while clamp mode takes the border
    color and extends it out infinitely.
    
    In general, other textures can be sampled similarly, using these 
    same two-letter prefixes ("_fw", "_pc", etc.).  Or, you can 
    always just leave off the prefix, and MilkDrop will assume you 
    want to do "_fw" - bilinear filtering and wrap mode - the defaults.

    
    
    MILKDROP'S BUILT-IN TEXTURES - MAIN, BLUR, and NOISE
    ----------------------------------------------------
    MilkDrop has several built-in textures you can sample from.  
    
    MAIN
    ----
    First, there is the Main texture (the internal canvas).  As already 
    mentioned, you can sample from it by using sampler_main or one
    of its variants.
    
    
    BLUR1, BLUR2, BLUR3
    -------------------
    Next, there are several blurred versions of the main texture.
    These are called Blur1, Blur2, and Blur3.  Each one is 
    progressively blurrier.  You can access them using these special
    functions: 

        GetBlur1(uv)     // these take a float2 as input
        GetBlur2(uv)     // & return a float3 color value
        GetBlur3(uv)    
        
    GetBlur1 returns a slightly blurred image, GetBlur2 a more blurry image, 
    and GetBlur3 an extremely blurry image.  A call to one of the GetBlur 
    functions is very fast, but keep in mind that the blur textures are only 
    generated each frame if the shaders actually use them, and the results
    find their way into the final output color value of the pixel shader!
    Blur1 is the fastest to generate; then Blur2 (because it is generated
    from Blur1); and finally, Blur3 is the slowest (generated from Blur2).    
    
    Here is an example of how to use one:
    
        float3 blurry = GetBlur2(uv);
    
    You could add this to your sample from the Main texture to
    produce a softer-looking image, for example.  Or, you could
    do an edge detect in the composite shader, by taking the 
    [absolute value of the] difference between the crisp and blurred
    main textures:
    
        float3 crisp = tex2D(sampler_main, uv).xyz;
        float3 blurry = GetBlur1(uv);
        ret = abs( crisp - blurry )*4;
    
    The "skin dots" effect in some of the presets (it makes spots 
    and stripes like you might see on fish or leopards, in nature)
    is based on a very mild edge-detect in the *warp* shader,
    and uses it to enforce a certain amount of variance in the 
    color values.  It also serves to break up large areas of solid
    white pixels.
    
    Note that you can do some cool glow effects by raising the
    "min" values above 0.  Say, for example, you set blur1_min
    to 0.5.  That means that any pixels with color values below 
    0.5 will get clipped to 0.5.  So, when you call GetBlur1(),
    it's going to give you values in the range [0.5 .. 1.0].  
    However, because you were only using half the range of possible
    values, the precision of these values will be twice as good.
    That's the purpose of the min/max values.  Watch out, though -
    having your values clipped to a minimum of 0.5 would look bad
    if you actually had colors that are over 0.5, and you're not 
    subtracting that 0.5 off.
    
    However, if you do set a min and then subtract it off, you can 
    also get some great glow effects, where only really
    bright pixels contribute to the "glow"  If you set the min to 
    0.7, for example, and then sample like this:
        
        ret += (GetBlur1(uv) - blur1_min)*2;
        
    It will subtract off the 0.7 minimum threshold, but because
    of the clipping, you will basically just see the bright
    pixels "glowing".  The *2 is just for a little extra glow.
    
    
    
    
    NOISE TEXTURES
    --------------
    There are also "noise" (random value) textures built in to MilkDrop.  
    They are generated when MilkDrop starts, but only so the large amount
    of (random) data wouldn't bloat the size of the MilkDrop download.
    They vary in the quality (smoothness) of the noise, as well as
    how often the pattern repeats itself.  Always use the smallest
    possible noise texture (_lite or _lq versions) when possible.
    
    Here are the details on the six textures:
    
    NAME           DIMS  PIXELS    QUALITY
    ----           ----  ------    ---------
    noise_lq       2D    256x256   low
    noise_lq_lite  2D    32x32     low
    noise_mq       2D    64x64     medium
    noise_hq       2D    32x32     high
    noisevol_lq    3D    32x32x32  low
    noisevol_hq    3D    8x8x8     high
    
    Notice that four of them are two-dimensional (use tex2D(float2 uv) 
    to sample them), and two of them are three-dimensional (use 
    tex3D(float3 uvw) to sample them).  
    
    They come in at various sizes.  You should always use the smallest
    one necessary, to be video memory cache-friendly!
    
    The _lq, _mq, and _hq suffixes denote low, medium, or high quality.
    The _lq textures have one random value at every texel in the 
    texture.  But the _mq textures have (generally) about four texels
    per random value, with high-quality [cubic] filtering baked into the 
    texture.  (Sometimes you just want something better than bilinear
    filtering, you know?)  The high-quality textures usually have about
    8 texels for every random value.  The sizes given here, in pixels,
    are actually abstractions - they are the conceptual # of pixels
    (values) before repetition.  In reality, the textures are bigger 
    (for medium & high quality), and the extra texels are all filled 
    in using high-quality interpolation.  
    
    The higher-quality textures aren't any slower to use, as long as
    you're sampling them at the right frequency.  If you sample any
    of these at too high a frequency (i.e. tile them like crazy /
    multiply the UV's by a large number) your video memory texture
    cache will bring your GPU to a grinding halt.  Don't do it!

    If using Noise textures with the default sampler settings (filtering 
    and wrap), you don't need to declare them above the shader_body; they 
    are always available.  However, if you want to sample them with 
    special options (clamping or point sampling), then you do have to.  
    (ex: "sampler sampler_fc_noise_lq", or "sampler_pw_noise_lq").
    
    To sample a color value from a noise texture, add code like this:
    
        float4 noiseVal = tex2D(sampler_noise_lq, uv_orig );
        
    This returns a float4 of values in the [0..1] range.  However, the noise
    image will be stretched up so the 64x64 pixels cover the screen.  What we'd 
    really like is to tile it so the noise values map 1:1 to pixels on the
    screen.  
    
    To do this, we need to invoke another handy feature: you can fetch the size 
    of any texture in MilkDrop.  Just declare a float4 (still outside the shader 
    body) with the name of the texture, preceded by "texsize_" - like this:
    
        float4  texsize_noise_lq;  // .xy = (w,h); .zw = (1/(float)w, 1/(float)h)
    
    Also, recall that the size of the Main canvas is universally available to
    all shaders, and looks like this: (this is auto-declared for you, by the way)
      
        float4 texsize       // .xy = (w,h); .zw = (1/(float)w, 1/(float)h)
    
    So, if we change our sampling code to look like this:
    
        float4 noiseVal = tex2D(sampler_noise_lq, uv_orig*texsize.xy*texsize_noise_lq.zw );
    
    It's going to do exactly that.  This is a very common and useful technique.  
    uv_orig gives you the original (unwarped)
    UV coordinates [0..1].  If we then multiply by texsize.xy, we get the 
    pixel number we are on.  For example, if the screen was 1280 x 1024 pixels,
    we'd get float2 in the range [0..1279, 0..1023].  If we then multiply by
    texsize_noise_lq.zw, we're dividing by the size of the noise texture,
    in pixels (this one is 256x256).  So, we'd end up with UV coords roughly 
    in the range [0..5, 0..4] - our image has been perfect tiled onto the
    screen, with the pixels displaying 1:1.
    
    This can be used to mix a bit of random noise into the image each frame, 
    which can increase image quality - it's similar to error diffusion 
    dithering (which is one of the things that set the original Geiss 
    plugin/screensaver apart from the others, image-quality wise!).   You 
    can ponder the reasons why.  Also, further adding "rand_frame.xy" to the 
    UV coords will reposition the noise values every frame, making it seem
    like truly random [changing] noise:
    
        float2 noise_uv = uv_orig*texsize.xy*texsize_noise_lq.zw + rand_frame.xy;
        float4 noiseVal = tex2D(sampler_noise_lq, noise_uv);
    
    To add random dithering (which, statistically, is the same as error-
    diffusion dithering), try this:
    
        float2 uv_noise = uv_orig*texsize.xy*texsize_noise_lq.zw + rand_frame.xy;
        half4 noiseVal = tex2D(sampler_noise_lq, uv_noise);
        ret = tex2D(sampler_main, uv);
        ret += (noiseVal.xyz*2-1) * 0.01;
        
    This will add a good deal of noise into the image each frame.  Adding
    'rand_frame.xy' to the UV coordinate serves to randomly place
    the noise texture each frame, preventing the noise imprint from being
    exactly the same each frame, which would cause artifact buildup.

    Important: Note that the medium- and high-quality textures should never be 
    used for 1:1 mapping! - it is a huge waste.  You will only benefit from their
    higher quality if you are *zoomed in* on these textures, seeing them
    magnified, sampling them at a low frequency.  If they are minified 
    (sampled at a high frequency / zoomed out of) or even displayed at 1:1, 
    you will thrash your video memory cache and the preset will run very 
    slow.
        
    
    
    
    
    READING TEXTURES FROM DISK
    --------------------------
    Declaring and sampling from your own textures is easy.  First,
    create your texture.  If you plan on sharing your presets with
    other people, please make your texture SMALL (256x256 or less)
    and save it as a JPG file at 95% quality.  The file size should
    be between 10k and 50k (kilobytes).  Of course, the textures
    could be huge, crisp photos if you want - they will just be
    heavy (to send to other people) and will cause a little delay
    when you switch to a preset that uses them (and loads the texture).  
    
    Save the texture to the folder:
    
        c:\program files\winamp\plugins\milkdrop2\textures
        
    or wherever you installed Winamp and MilkDrop to.  Let's imagine
    you called your texture billy.jpg.
    
    Then, in any shader, above the shader_body section, declare a sampler 
    for the texture:
    
        sampler sampler_billy;
        
    That's all you have to do.  It will find the file (billy.jpg)
    and load it.  Note that the sampler name DOES have to start with 
    "sampler_", and if you want, you could prefix it with "sampler_pc_" 
    or "sampler_fw_" (or whatever) to turn on texture clamp and/or point 
    sampling.  
    
    Texture formats supported include: [in order of priority]
        
        jpg   (great compression)
        dds   (a microsoft/directx format - very flexible - can even do 3D)
        png   (portable network graphics; can give you compress w/an alpha channel)
        tga   (truevision Targa - 1, 3, or 4 channels)
        bmp   (puke)
        dib   (puke)
        
    Now that you've declared the texture, you can sample it like this, 
    from within the shader_body section:
    
        float3 mypixel = tex2D(sampler_billy, uv2).xyz;
        
    So first it will try to find billy.jpg; then billy.dds; and so
    on, until it finds a valid texture.  If the texture can not be
    found in the "milkdrop2\textures" directory, it will then also try
    to find it **in the current preset directory**; this is done so that
    preset downloaders can be lazy and just put the presets, along
    with the textures that come with them, into the same directory.
    
    If your shader wants to know how big the texture is, declare this
    (also above the shader_body section):
    
        float4 texsize_billy;    // .xy = (w,h); .zw = (1/w, 1/h)
        
    MilkDrop will see the "texsize_" prefix and automatically know what
    to do.  (You don't have to include the //comment, of course.)
    
    To stretch this texture to cover the screen, do this (in the shader
    body):

        ret = tex2D(sampler_billy, uv).xyz;
    
    Or to map it fitted to the screen, aspect-aware:
    
        ret = tex2D(sampler_billy, uv * aspect.xy).xyz;
    
    Or to tile it so the pixels are represented 1:1:
    
        ret = tex2D(sampler_billy, uv * texsize.xy * texsize_billy.zw).xyz;
        
    Or to map it tiled exactly 5 times:

        ret = tex2D(sampler_billy, uv * 5).xyz;

    Or to zoom into the center 20% of the image:

        ret = tex2D(sampler_billy, (uv-0.5)*0.2 + 0.5 ).xyz;
        
    Of course, you could also declare sampler_pw_billy, to do point
    sampling, or sampler_fc_billy, for clamping, and so on.



    
    RANDOM TEXTURE SELECTION
    ------------------------
    You can also load in a random texture.  Just use the name "rand00"
    through "rand15" as the filename, and MilkDrop will pick a random
    file and do the rest.  The texsize_ parameters work too.  For example:
    
        sampler sampler_rand07;
        float4  texsize_rand07;
                
        shader_body 
        {    
          ...
          float3 color = tex2D(sampler_rand07, uv);
          ...
        }
        
    You can also choose from random subsets of textures on disk!  Say you
    have a whole slew of random textures in your textures\ subdirectory,
    but you have a subset in there that begin with the word "smalltiled".
    If you specify:
    
        sampler sampler_rand02_smalltiled;
        float4  texsize_rand02;    // ...it's smart enough to get it from just this.
        
        shader_body 
        {    
          ...
          float3 color = tex2D(sampler_rand07_smalltiled, uv);
          ...
        }
    
    Then every time the preset loads (or the shader is recompiled), it's
    going to pick a new random texture, but it will choose only from the
    subset of those textures whose names begin with "smalltiled".  

    One last thing, a tip: if you are working in windowed mode (or multimon)
    and added textures to the directory and haven't yet exited the plugin, 
    to force the list of textures to update itself, edit one of the shaders 
    (any shader) and then hit CTRL+ENTER (accept).  That will trigger it
    to rescan the directory (but only if it needs to, because your shaders
    ask for random textures).



    
    MISC. COOL SHADER TRICKS
    ------------------------
    
        AUTO CENTER DARKENING
        ---------------------    
        MilkDrop 1 had a cool feature, "center darken", that would quickly dampen 
        bright pixels placed at the center of the screen, because in "zoomy" 
        (forward motion) presets, the screen would quickly become all white
        if you didn't.  As presets get more sophisticated, though, where the
        "center" of the zooming motion is can be very hard to pinpoint.
        
        You can actually find it algorithmically.  Wherever on the screen you
        have warped UV coordinates that are very close to the original UV
        coordinates, it means there's either no motion there, or it's the
        center of motion - you'll know, based on what kind of preset you're
        writing.  If it's a "zoomy" preset, it's probably the latter.  In this
        case, just use something like this in your warp shader:
        
            // this darkens the pixels at the center of the zoom, only
            ret *= 0.97 + 0.03*saturate( length(uv - uv_orig)*200 );  


        RANDOM DIFFUSION DITHER
        -----------------------        
        See above, in the "noise" section.

       
        SOFT MAX
        --------
        The max(a,b) function returns the max. value for each channel 
        of the two inputs, however, this can have a discontinuous
        look sometimes, as it switches from a to b or back suddenly.
        If you want a not-so-accurate, but smoother, max function,
        try this:
        
            a + b - a*b
        
        Note that the inputs must be in the [0..1] range.
        
        

    
    
    QUALITY ASSURANCE FOR SHADERS
    -----------------------------
    *Please* adhere to these guidelines when writing shaders...

      1. use small (256x256 or less) textures; save as jpg 95%
          -so your presets are small to download, and so they load w/o a pause.

      2. make sure your shaders are zippy.  
          -avoid 'if' statements.
          -avoid "massive zoom-outs" of any texture.  Sampling textures at too
            high a frequency thrashes your texture cache and will drop your 
            framerate like mad.  Sample things near 1:1, or feel free to zoom
            in close on them, but avoid extreme zoom-outs.
          -avoid sin() and cos() functions if you can.  If their inputs don't
            vary from pixel to pixel, calculate the sin/cos values in
            the per-frame equations, then store them in q1-q32, and read
            them into your shader from there.
          -any calculation that results in the same value for all pixels 
            on the screen should be offloaded into MilkDrop's per-frame 
            equations, then passed to the shader via the q1-q32 variables.
            These variables are directly accessible from all shaders (q1,
            q2, etc.) and can also be read in as float4's for convenience
            (q1-q4 make up a float4 called _qa; q5-q8 come together in _qb;
            etc.).
          -also avoid doing motion/warping calculations in the warp shader,
            that you could do in the per-vertex equations.  Those run on the
            CPU, which is a huge resource that is almost never completely
            used; the GPU, although processing 1,000 times as much math
            because it works per-pixel instead of per-vertex, can use as
            much of a break as it can get.  Any low-frequency effects (values 
            that vary slowly over the screen) should go in the per-vertex
            equations, and only the high-frequency component of the motion
            or warping should come from the pixel shader.
          -keep in mind that the DirectX shader compiler is superb at 
            optimizing; anything that can be thrown out, will be.  Things like 
               ret *= 1.0;
               ret += 0;
               ret += tex2D(mytex, uv).xyz * 0;
            will completely disappear.  If you sample a texture and then the
            sample doesn't end up making it into the final output color value,
            the texture will never even get bound (or loaded from disk), 
            let alone sampled.  And so on.
          -you can use the 'half' type wherever you don't need full 'float' 
            precision.  Generally use 'float' for UVs and time values, and 
            'half' for almost everything else.  However, don't stress about it 
            too much, because most GPUs run
            everything at full-precision & full-speed nowadays - and for the
            older GPUs that don't, the driver is probably very smart (if it's
            an Nvidia or ATI card) about auto-substituting halfs for floats
            wherever possible.            

      3. before sharing your presets, please make sure they look good in a 
          SQUARE or WIDESCREEN window.  If they don't, scan these guidelines
          and you will probably be able to easily fix it.
          
          The overall design goal in MilkDrop, concerning aspect ratio, is to 
          fit the preset to the long axis of the window, and to crop the rest, 
          but to do all of this without any stretching or zooming (so all internal 
          canvas pixels map 1:1 to screen pixels).  
          
          -per-frame/per-vertex equations: 
            * multiply XY coords by the values "aspectx" and "aspecty", respectively.
          
          -shader code: 
            * multiply UV coordinates by 'aspect.xy', prior to using them
            to sample a texture, to make the texture fit on the screen properly.
            (For example, if the screen is wide, the image will be fitted to cover
            the width of the screen, and it will be cropped at the top and bottom.)
            
            * multiply by 'aspect.zw' to make it fit the other way (it will fit
            the image to be completely visible in one dimension, and tiled in the
            other direction).	 
            
            * any time you perturb the UV coordinates in the warp shader, prior to
            sampling the Main texture, you should multiply the "delta" you are applying
            by aspect.xy.  Otherwise, in a widescreen window, the "delta" will actually
            be dramatically squished, or in a tall window, the change would be 
            elongated very vertically.  

        	  * the 'ang' value is aspect-aware, in the per-vertex equations, as well
        	  as in the warp and composite shaders.  However, if you generate your own
        	  high-quality "ang" value using atan2(), beware - you really
        	  should multiply the UV's by aspect.xy beforehand, like this:
                float2 uv2 = (uv-0.5)*aspect.xy;
                float ang = atan2(uv2.y,uv2.x);

        	  

    
   
    
    g. QUALITY ASSURANCE
    ----------------------
    When designing presets, please adhere to the pixel shader 'quality assurance'
    guidelines in the above section, as they are very important.  But, in order 
    to make sure the presets you create work well on other systems, please
    also keep in mind:
        
         1. Keep your presets fast.  There's nothing to spoil the mood like
        a preset popping up that chokes at 10 fps.  Since division is 11
        times slower than multiplication (or addition/subtraction), if you
        divide a bunch of values by one other value, pre-divide that value
        ("inv = 1/myval;") and then multiply those other values by that
        inverse.  Also, never put computations in the per-vertex code that
        are the same for every pixel; move these into the per-frame code,
        and carry the results to the per-vertex code using the q1-q32 variables.
        Remember that maxim: "If a per-vertex equation doesn't use at least 
        one of the variables { x, y, rad, ang }, then it should be actually 
        be a per-frame equation."

         2. Design your presets using the default mesh size option
        from the config panel, or at least check, before you distribute them,
        to make sure they look correct at the default mesh size.  If your 
        mesh is too coarse (small), then a viewer with the default mesh size 
        might see unexpected "bonus" effects that you might not have intended,
        and might mess up your preset.  If your mesh is too fine, then a
        viewer with the default might not see all the detail you intended,
        and it might look bad.

         2. Try to design your presets in a 32-bit video mode, so that its
        brightness levels are standard.  The thing to really watch out
        for is designing your presets in 16-bit color when the "fix pink/
        white color saturation artifact" checkbox is checked.  This 
        checkbox keeps the image extra dark to avoid color saturation,
        which is only necessary on some cards, in 16-bit color.  If this
        is the case for you, and you write a preset, then when you run
        it on another machine, it might appear insanely bright.
        
         3. Don't underestimate the power of the 'dx' and 'dy' parameters
        (in the per-vertex equations).  Some of the best presets are based 
        on using these.  If you strip everything out of a preset so that 
        there's no motion at all, then you can use the dx and dy parameters 
        to have precise manual control over the motion.  Basically, all the 
        other effects (zoom, warp, rot, etc.) are just complicated 
        abstractions; they could all be simulated by using only { x, y, 
        rad, ang } and { dx, dy }.
        
         4. If you use the 'progress' variable in a preset, make sure you 
        try the preset out with several values for 'Time Between Auto
        Preset Changes'.  The biggest thing to avoid is using something
        like sin(progress), since the rate at which 'progress' increases 
        can vary drastically from system to system, dependong on the user's
        setting for 'Time Between Auto Preset Changes'.

         5. if writing shaders, please also see the 'Quality Assurance for
        Shaders' section above.


    
    h. DEBUGGING
    -----------------------  
    One feature that preset authors should definitely be aware of is the
    variable monitoring feature, which lets you monitor (watch) the value
    of any per-frame variable you like.  First, hit the 'N' key to show
    the monitor value, which will probably display zero.  Then all you 
    have to do is add a line like this to the per-frame equations:

        monitor = x;

    where 'x' is the variable or expression you want to monitor.  Once you
    hit CTRL+ENTER to accept the changes, you should see the value of the
    per-frame variable or expression in the upper-right corner of the
    screen!

    Once again, note that it only works for *per-frame* equations, and NOT
    for per-vertex equations.  



    
    i. FUNCTION REFERENCE
    -----------------------  
    Following is a list of the functions supported by the expression evaluator
    (for preset init, per-frame, and per-vertex equations; NOT for pixel shaders).
    The list was blatently ripped from the help box of Justin Frankels' AVS 
    plug-in, since MilkDrop uses the expression evaluator that he wrote.
    
        Format your expressions using a semicolon (;) to delimit between statements.        
        Use parenthesis ['(' and ')'] to denote precedence if you are unsure.        
        The following operators are available:        
            = : assign        
            +,-,/,* : plus, minus, divide, multiply        
            | : convert to integer, and do bitwise or        
            & : convert to integer, and do bitwise and        
            % : convert to integer, and get remainder        
        The following functions are available:        
            int(var)   :  returns the integer value of 'var' (rounds toward zero)
            abs(var)   :  returns the absolute value of var
            sin(var)   :  returns the sine of the angle var (expressed in radians)        
            cos(var)   :  returns the cosine of the angle var        
            tan(var)   :  returns the tangent of the angle var        
            asin(var)  :  returns the arcsine of var        
            acos(var)  :  returns the arccosine of var        
            atan(var)  :  returns the arctangent of var        
            sqr(var)   :  returns the square of var        
            sqrt(var)  :  returns the square root of var        
            pow(var,var2) : returns var to the power of var2        
            log(var)      : returns the log base e of var        
            log10(var)    : returns the log base 10 of var        
            sign(var)     : returns the sign of var or 0        
            min(var,var2) : returns the smalest value        
            max(var,var2) : returns the greatest value        
            sigmoid(var,var2) : returns sigmoid function value of x=var (var2=constraint)        
            rand(var)     : returns a random integer modulo 'var'; e.g. rand(4) will return 0, 1, 2, or 3.
            bor(var,var2) : boolean or, returns 1 if var or var2 is != 0        
            bnot(var)  : boolean not, returns 1 if var == 0 or 0 if var != 0        
            if(cond,vartrue,varfalse) : if condition is nonzero, returns valtrue, otherwise returns valfalse        
            equal(var,var2) : returns 1 if var = var2, else 0        
            above(var,var2) : returns 1 if var > var2, else 0        
            below(var,var2) : returns 1 if var < var2, else 0            
            



return to top
return to milkdrop.html