$OpenBSD: upgrade38.patch,v 1.2 2005/10/30 19:59:06 nick Exp $

Apply by doing:
	cd /
	patch -p0 < upgrade38.patch


--- etc/ftpusers	Sun Mar 20 01:44:30 2005
+++ ../38/etc/ftpusers	Sat Sep 10 17:15:28 2005
@@ -39 +39,2 @@
 _ospfd
+_hostapd
--- etc/inetd.conf	Sun Mar 20 01:44:30 2005
+++ ../38/etc/inetd.conf	Sat Sep 10 17:15:29 2005
@@ -9,4 +9,2 @@
 #127.0.0.1:8021	stream	tcp	nowait	root	/usr/libexec/ftp-proxy	ftp-proxy
-#telnet		stream	tcp	nowait	root	/usr/libexec/telnetd	telnetd -k
-#telnet		stream	tcp6	nowait	root	/usr/libexec/telnetd	telnetd -k
 #shell		stream	tcp	nowait	root	/usr/libexec/rshd	rshd -L
--- etc/login.conf	Sun Mar 20 01:44:31 2005
+++ ../38/etc/login.conf	Sat Sep 10 17:15:30 2005
@@ -13,4 +13,4 @@
 # chpass	Do not authenticate, but change users password (change
-#		the kerberos password if the user has one, else change
-#		the local password)
+#		the YP password if the user has one, else change the
+#		local password)
 # lchpass	Do not login; change user's local password instead
@@ -42,4 +42,4 @@
 	:umask=022:\
-	:datasize-max=256M:\
-	:datasize-cur=75M:\
+	:datasize-max=512M:\
+	:datasize-cur=512M:\
 	:maxproc-max=128:\
@@ -71,3 +71,3 @@
 staff:\
-	:datasize-cur=75M:\
+	:datasize-cur=512M:\
 	:datasize-max=infinity:\
--- etc/rc.conf	Sun Mar 20 01:44:30 2005
+++ ../38/etc/rc.conf	Sat Sep 10 17:15:29 2005
@@ -8,2 +8,3 @@
 			# be sure to enable multicast_router below.
+ospfd_flags=NO		# for normal use: ""
 bgpd_flags=NO		# for normal use: ""
@@ -20,2 +21,3 @@
 apmd_flags=NO		# for normal use: ""
+acpid_flags=NO		# for normal use: ""
 dhcpd_flags=NO		# for normal use: ""
--- etc/sysctl.conf	Sun Mar 20 01:44:31 2005
+++ ../38/etc/sysctl.conf	Sat Sep 10 17:15:29 2005
@@ -15,2 +15,3 @@
 #net.inet.ipcomp.enable=1	# 1=Enable the IPCOMP protocol
+#net.inet.etherip.allow=1	# 1=Enable the Ethernet-over-IP protocol
 #net.inet.tcp.ecn=1		# 1=Enable the TCP ECN extension
@@ -19,3 +20,3 @@
 #fs.posix.setuid=0		# 0=Traditional BSD chown() semantics
-#vm.swapencrypt.enable=1	# 1=Encrypt pages that go to swap
+#vm.swapencrypt.enable=0	# 0=Do not encrypt pages that go to swap
 #vfs.nfs.iothreads=4		# number of nfsio kernel threads
@@ -23,3 +24,3 @@
 #kern.usercrypto=1		# 1=enable userland use of /dev/crypto
-#kern.splassert=2		# 2=enable and verbose error messages.
+#kern.splassert=2		# 2=enable with verbose error messages
 #machdep.allowaperture=2	# See xf86(4)
--- etc/syslog.conf	Sun Mar 20 01:44:31 2005
+++ ../38/etc/syslog.conf	Sat Sep 10 17:15:29 2005
@@ -3,5 +3,4 @@
 
-*.err;kern.debug;auth.notice;authpriv.none;mail.crit	/dev/console
 *.notice;auth,authpriv,cron,ftp,kern,lpr,mail,user.none	/var/log/messages
-kern.debug;user.info;syslog.info			/var/log/messages
+kern.debug;syslog,user.info				/var/log/messages
 auth.info						/var/log/authlog
@@ -15,8 +14,14 @@
 
-*.err							root
-*.notice;auth.debug					root
-*.alert							root
+# Uncomment this line to send "important" messages to the system
+# console: be aware that this could create lots of output.
+#*.err;auth.notice;authpriv.none;kern.debug;mail.crit	/dev/console
+
+# Uncomment this to have all messages of notice level and higher
+# as well as all authentication messages sent to root.
+#*.notice;auth.debug					root
+
+# Everyone gets emergency messages.
 *.emerg							*
 
-# Uncomment to log to a central host named "loghost".   You need to run
+# Uncomment to log to a central host named "loghost".  You need to run
 # syslogd with the -u option on the remote host if you are using this.
@@ -24,9 +29,8 @@
 # ISDN-equipment).  If you run -u, you are vulnerable to syslog bombing,
-# and should consider blocking external syslog packets
+# and should consider blocking external syslog packets.
 #*.notice;auth,authpriv,cron,ftp,kern,lpr,mail,user.none	@loghost
-#kern.debug,user.info,syslog.info				@loghost
-#auth.info,authpriv.debug,daemon.info				@loghost
+#auth,daemon,syslog,user.info;authpriv,kern.debug		@loghost
 
 # Uncomment to log messages from sudo(8) and chat(8) to their own
-# respective log files.  Matches are done based on the program name
+# respective log files.  Matches are done based on the program name.
 # Program-specific logs:
--- etc/mail/aliases	Sun Mar 20 01:44:58 2005
+++ ../38/etc/mail/aliases	Sat Sep 10 17:15:50 2005
@@ -28,2 +28,3 @@
 _ftp: /dev/null
+_hostapd: /dev/null
 _identd: /dev/null