SAP Community - SAP Health

PMD Patient details are not Shown

2018-04-10T16:41:08+02:00

Hello All ,

i have an issue Regarding PMD of the ish Module

i have created the pmd on generator version 2 and the layout runs fine and it saves the

document as well But i want the pmd to show the patient details like (NAME , ID ,

Birthdate ) by default when i select the patient

So when i start the pmd i need the patiënt information shown

is that applicable and if its applicable

how can i do it ?

Rewards point will be given to helpful answers .

[IS-H] Is there any log of NBEW table? (STATU change)

2018-08-17T09:42:47+02:00

Hi, I'm trying to get the waiting times and other metrics of patient movements, each movement could have diferent statuses (STATU). But for each status the previous date/time gets updated.

Is there any log of time of change of each movement STATU field?

thank you!

Applicable SAP Modules to Learn for Healthcare Functional Consultants

2018-10-28T07:33:22+01:00

Have around 15 years of Healthcare Provider and Health plan experience in United States , have an interest to learn SAP to uplift my career with the market trends.

Could you please suggest what could the best SAP modules I could look in for training.

Thanks in advance for your responses

Message no. N1ME357 ISH ERROR

2019-04-23T16:46:43+02:00

COULD ANY ONE HELP Message no. N1ME357

DURING CREATION OF MIXED DRUG

Amount units KG and ML cannot be compared

BP deletion in SAP Patient management

2019-09-19T17:42:16+02:00

Hi All,

CAn you please throw some points inorder to delete the business partner which was added by mistake by our end user.

I tried the usual way of deleting the business partner but all in vain, attached the screen-shot with message business-partner-deletion-in-sap-patient-managemen.png where I am receiving in the system whenever I try via the BUPA_DEL or BUPA_PRE_DA. Kindly, let me know how we can delete the BP not the BP role. Even i tried in spro.

Thanks for your time.

Regards,

Pavithrra

University educational materials

2019-10-18T00:35:15+02:00

I am trying to find instructor documentation and product descriptions for all of the instructional products available for university instructions. I have used GBI for a number of years for several courses, but would like to see what else is available. I can view their titles in the UCCS product drop down, but I do not know the description of these nor know how/where to access the instructor's materials. Please advise. Thank you, Kevin

p.s. The tags below are meaningless to my request. There were selected at random in order for me to submit the question.

Create provisional patient bapi sap health

2019-11-14T08:51:52+01:00

dear experts,

it there a bapi to create provisional patient? such as making appointment for new patient in tcode NWP1

Thanks

Document deletion in ISHMed

2020-02-06T11:12:47+01:00

Dear Experts,

I'm trying to figured out how the SAP delete the document in ISHMed (see below) what bapi/functions being executed when setting this deleted flag.

Thanks

SAP RM XFT Centera migration

2020-02-10T15:43:50+01:00

Dears,

I’m reaching out as I have a customer using SAP Application writing on a Centera. Centera product has to be decommissioned by end of Sept. this year.

We have suggested using an ECS as a new Data Target, which is doable and very easy to deploy. However, customer also wanted to explore the Option of using a Data Domain with his SAP application using NFS protocol.

Customer described his application with the following…

“SAP RM writes via XFT in the PBS Content Share. PBS could also be via NFS on a Data Domain NFS Mount”

My question would be, is there any native SAP tool or XFT itself migrate old Data from Centera (CAS) to Data Domain (NFS) or is this impossible?

Looking forward for your feedback as soon as possible, please.

Best regards

BAPI_PATIENT_CREATE

2020-02-11T06:06:35+01:00

I need to create a patient using BAPI_PATIENT_CREATE.

I‘m using an external development system (Delphi with a special library to address bapi).

My question: In the table PATIENT_DATA doesn‘t address exists an address field but only an address reference PAT_ADDR_NO. To fill the address of a patient there is a table I_ADDRESSES with a corresponding field ADDR_NO. When I create a patient, how can I get a new ADDR_NO? Do I have to fill the field?

And if I want to change the address using BAPI_PATIENT_CHANGE, which fields need to be changed? How to use ADDR_NO in case of a change?

R18 system

2020-03-05T12:37:40+01:00

What is R18 system and its functionality?

Ressource planning based on patient course in WebI

2021-02-02T20:28:12+01:00

* I am new to Web Intelligence *

I have data on patients who started a certain treatment: Patient IDs and the date of each referral.

I have a list of all appointments ("First meeting with doctor, 60 minutes, 1 month after referral", "Treatment start, 120 minutes, 2 months after referral", etc.) which I need to plot for each patient in order to map the expected ressources needed in the next 3 months.

I have made variables for each part of the treatment in the format as follows:

Date 1st Appt = RelativeDate([Referral Date]; 30)

Date 2nd Appt = RelativeDate([Referral Date]; 60)

Ressources 1st Appt (minutes) = Count (Patient ID) * 60 ForEach ([Date 1st Appt])

Ressources 2nd Appt (minutes) = Count (Patient ID) * 120 ForEach ([Date 2nd Appt])

etc.

I intend to make a graph for the next 3 months where I plot all the minutes against a time dimension on the x-axis with all the dates. It works fine when I plot each appointment on its own (Ressources 1 Appt / Date 1st Appt). However, when I plot all together the dates get "mixed up". Instead of the 2nd appoinment being 30 days later than the 1st appointment, they all land on the same date.

Can someone help me figure out what I am doing wrong. As mentioned, I am quite new with WebI, so I probably just need some basic ideas.

Thanks in advance!

Medical Insurance

2021-02-24T13:38:33+01:00

Dear All,

our company have a medical department this department is related with dealing with hospital and doctors upon our medical network

as it is a link between company employees and the medical network the cycle is as follow

our employee ask the medical department for a medical service
the medical department guides the employee to the destination (doctor or hospital)
the employee recieves the treatment upon his medical card id
there will be a cost recorded by the destination according to the medical service
the employee may have a prescription to be issued from the pharmacy
there will be a cost recorded by the pharmacy
at the end of month there will be a claim sent from medical destinantion to our company
the claim is reviewed by the medical department
a check is delivered to their bank acount or direct cash to the medical destination

that's a simple scenario for the work cycle

how can i apply this in SAP

please guide me from where i can begin

any materials

any other implemented cycle

thanks

Dummy patient/case data set for IS-H (SAP Patient Management)

2021-03-18T13:25:19+01:00

We are running IS-H 618 SP24 on a ERP6 EHP8 System. This system is for development purposes only - not a production system. For these development purposes, it would be awesome if we had some "dummy" patient/case records. Is such a "dummy"/demo dataset of patients and associated IS-H data available somewhere?

Thanks!

Chris Fortmüller

Inbounding Idoc status

2021-09-05T15:05:31+02:00

Hi All, I'm currently in a dilemma and asking for someone help ASAP. I accidentally clicked the set deletion flag of my inbounding idoc. How can I change it back from 68 to 51, if I don't have access in SE38.

Sap module

2021-12-12T09:46:43+01:00

Hi..

I have experienced in us healthcare field as back office or customer service currently in genpact but now I want to move my career with sap so which module is suitable for me?

Error 'System.NotSupportedException' occurred in CrystalDecisions.CrystalReports.Engine.dll

2023-07-18T13:09:23+02:00

Hello Everyone,

I am using vs2012 to building a window form application with Sap Crystal Report(sdk is "CRforVS_13_0_5.exe"),

sap report 32bit and 64bit runtime file were the same version as sdk,they are was 13.0.5,

but it takes 2~3 seconds to send out the report document to printer,It seems to get an exception in the output window:

*************First printing*************

time1: 2023/7/18 11:48:33

The first opportunity exception of type 'System. NotSupportedException' occurred in CrystalDecisions.CrystalReports. Engine.dll. Thread '<Nameless>' (0x23fc) has exited with a return value of 0 (0x0).

time2: 2023/7/18 11:48:35

*************end*************

It takes 2 seconds to print out(from 11:48:33 to 11:48:35),this action is slowly,I tried several times and all the results were the same,my code as below:

**********************************************************************

Console.WriteLine("time1:"DateTime.Now);

using (hkps_expsheet_main ReportSheetMain = new hkps_expsheet_main())

{

//hkps_expsheet_main is report document

ReportSheetMain.SetDataSource(static_variable.ExpSheet_DT);

this.crystalReportViewer1.ReportSource = ReportSheetMain; //binding report

this.crystalReportViewer1.ToolPanelView = CrystalDecisions.Windows.Forms.ToolPanelViewType.None;

ReportSheetMain.PrintToPrinter(1,true, 1, 1);//auto printing,no preview

}

Console.WriteLine("time2:"DateTime.Now);

***********************************************************************

Is there a solution? thanks

Healthcare | Cerner | Oracle

2024-09-20T19:23:57.218000+02:00

what is SAP's GTM strategy for Healthcare after Oracle has also announced that it will not be renewing the support contracts for the IS-H Complaints Monitor (RKT) solution package for Cerner Patient Management and Billing? ... This was something SAP already did in 2022, now Q2 2024 and beyond Oracle is there an approach other than the s/4 Hana PC - and solution extensions? Or what would be the proper implementation roadmap to pitch surrounding this gap in systems and capabilities that would be SAP's win here?

Open POST CHG creating a positive qty

2025-03-19T14:59:07.936000+01:00

Hello,

I have an open 922 POST CHG in LS26 causing a positive qty. Stock QTY in all other locations have been confirmed as accurate. How do I clear a positive POST CHG to correct my inventory?

How to know SAP license usage of my company?

2025-07-22T08:29:04.279000+02:00

Hi Experts

In our company, we have procured 155 SAP licenses. We have installed SAP ECC and S/4HANA (155 licenses ).

Now I want to get a report about the remaining license count and usage of the existing licenses.

Please advise.

Indka