/**
 *  Ecolink Wireless Light Switch
 *
 *  Copyright 2017 Austin Pritchett
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
 *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
 *  for the specific language governing permissions and limitations under the License.
 *
 */
 
 /*
  Milestone 1 - September 6th, 2017
  	Battery Reporting
    Adjusted Ping Time to improve battery life.
  Draft 2 - September 2nd, 2017
 	Basic Functionality
  Draft 1 - August 27th, 2017
 	Initial Commit
    Untested 
 */
metadata {
	definition (name: "Ecolink Wireless Light Switch", namespace: "ajpri", author: "Austin Pritchett") {
        
        capability "Actuator"
        capability "Battery"
		capability "Indicator"
 		capability "Switch"
		capability "Polling"
		capability "Refresh"
		capability "Sensor"
		capability "Health Check"
		capability "Light"
        
        fingerprint mfr:"014A", prod:"0006", model: "0001", deviceJoinName: "Wireless Light Switch" //Decora
        fingerprint mfr:"014A", prod:"0006", model: "0002", deviceJoinName: "Wireless Light Switch" //Toggle
        
	}

	simulator {
		status "on":  "command: 2003, payload: FF"
		status "off": "command: 2003, payload: 00"

		// reply messages
		reply "2001FF,delay 100,2502": "command: 2503, payload: FF"
		reply "200100,delay 100,2502": "command: 2503, payload: 00"
	}

	preferences {
		input "ledIndicator", "enum", title: "LED Indicator", description: "Turn LED indicator... ", required: false, options:["on": "When On", "off": "When Off", "never": "Never"], defaultValue: "off"
	}

	// tile definitions
	tiles(scale: 2) {
		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
			}
		}
        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
			state "battery", label:'${currentValue}% battery', unit:""
		}
		standardTile("refresh", "device.switch", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
		}


		main "switch"
		details(["switch","battery","refresh"])
	}
}

def installed() {
	// Device-Watch simply pings if no device events received for 482min(checkInterval)
	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
}

def updated(){
		// Device-Watch simply pings if no device events received for 482min(checkInterval)
		sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
  switch (ledIndicator) {
        case "on":
            indicatorWhenOn()
            break
        case "off":
            indicatorWhenOff()
            break
        case "never":
            indicatorNever()
            break
        default:
            indicatorWhenOn()
            break
    }
}

def getCommandClassVersions() {
	[
		0x20: 1,  // Basic
		0x56: 1,  // Crc16Encap
		0x70: 1,  // Configuration
	]
}

def parse(String description) {
	def result = null
	def cmd = zwave.parse(description, commandClassVersions)
    //log.debug "Command: ${cmd}"
	if (cmd) {
		result = createEvent(zwaveEvent(cmd))
	}
	if (result?.name == 'hail' && hubFirmwareLessThan("000.011.00602")) {
		result = [result, response(zwave.basicV1.basicGet())]
		log.debug "Was hailed: requesting state update"
	} else {
		log.debug "Parse returned ${result?.descriptionText}"
	}
	return result
}

def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
	[name: "switch", value: cmd.value ? "on" : "off", type: "physical"]
}

def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
	[name: "switch", value: cmd.value ? "on" : "off", type: "physical"]
}

def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
	[name: "switch", value: cmd.value ? "on" : "off", type: "digital"]
}

def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
	def value = "when off"
	if (cmd.configurationValue[0] == 1) {value = "when on"}
	if (cmd.configurationValue[0] == 2) {value = "never"}
	[name: "indicatorStatus", value: value, displayed: false]
}

def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
	[name: "hail", value: "hail", descriptionText: "Switch button was pressed", displayed: false]
}

def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
	log.debug "manufacturerId:   ${cmd.manufacturerId}"
	log.debug "manufacturerName: ${cmd.manufacturerName}"
	log.debug "productId:        ${cmd.productId}"
	log.debug "productTypeId:    ${cmd.productTypeId}"
	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
	updateDataValue("MSR", msr)
	updateDataValue("manufacturer", cmd.manufacturerName)
	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
}

def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
	def versions = commandClassVersions
	def version = versions[cmd.commandClass as Integer]
	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
	if (encapsulatedCommand) {
		zwaveEvent(encapsulatedCommand)
	}
}


def zwaveEvent(physicalgraph.zwave.Command cmd) {
	// Handles all Z-Wave commands we aren't interested in
	[:]
}

def on() {
	delayBetween([
		zwave.basicV1.basicSet(value: 0xFF).format(),
		zwave.switchBinaryV1.switchBinaryGet().format()
	])
}

def off() {
	delayBetween([
		zwave.basicV1.basicSet(value: 0x00).format(),
		zwave.switchBinaryV1.switchBinaryGet().format()
	])
}

def poll() {
	delayBetween([
		zwave.switchBinaryV1.switchBinaryGet().format(),
		zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
	])
}

/**
  * PING is used by Device-Watch in attempt to reach the Device
**/
def ping() {
		refresh()
}

def refresh() {
	delayBetween([
		zwave.switchBinaryV1.switchBinaryGet().format(),
		zwave.manufacturerSpecificV1.manufacturerSpecificGet().format(),
        zwave.batteryV1.batteryGet().format()
	])
}

void indicatorWhenOn() {
	sendEvent(name: "indicatorStatus", value: "when on", displayed: false)
	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
}

void indicatorWhenOff() {
	sendEvent(name: "indicatorStatus", value: "when off", displayed: false)
	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
}

void indicatorNever() {
	sendEvent(name: "indicatorStatus", value: "never", displayed: false)
	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
}

def invertSwitch(invert=true) {
	if (invert) {
		zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 4, size: 1).format()
	}
	else {
		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
	}
}

def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
	log.debug "Battery report received"
	def nowTime = new Date().time
	state.lastBatteryGet = nowTime
	def map = [ name: "battery", unit: "%" ]
	if (cmd.batteryLevel == 0xFF || cmd.batteryLevel == 0) {
		map.value = 1
		map.descriptionText = "$device.displayName battery is low!"
    } else {
		map.value = cmd.batteryLevel
	}
	map
}