#################################### # Akka Actor Reference Config File # #################################### # This is the reference config file that contains all the default settings. # Make your edits/overrides in your application.conf. # Akka version, checked against the runtime version of Akka. Loaded from generated conf file. include "version" akka { # Home directory of Akka, modules in the deploy directory will be loaded home = "" # The license key to use Akka. Free keys at https://akka.io/key license-key = "" # If false, will not warn if there is no Akka license. Note, this only # suppresses the log messages, it does not stop the actor system from # terminating. warn-on-no-license-key = true # Loggers to register at boot time (akka.event.Logging$DefaultLogger logs # to STDOUT) loggers = ["akka.event.Logging$DefaultLogger"] # Filter of log events that is used by the LoggingAdapter before # publishing log events to the eventStream. It can perform # fine grained filtering based on the log source. The default # implementation filters on the `loglevel`. # FQCN of the LoggingFilter. The Class of the FQCN must implement # akka.event.LoggingFilter and have a public constructor with # (akka.actor.ActorSystem.Settings, akka.event.EventStream) parameters. logging-filter = "akka.event.DefaultLoggingFilter" # Specifies the default loggers dispatcher loggers-dispatcher = "akka.actor.default-dispatcher" # Loggers are created and registered synchronously during ActorSystem # start-up, and since they are actors, this timeout is used to bound the # waiting time logger-startup-timeout = 5s # Log level used by the configured loggers (see "loggers") as soon # as they have been started; before that, see "stdout-loglevel" # Options: OFF, ERROR, WARNING, INFO, DEBUG loglevel = "INFO" # Log level for the very basic logger activated during ActorSystem startup. # This logger prints the log messages to stdout (System.out). # Options: OFF, ERROR, WARNING, INFO, DEBUG stdout-loglevel = "WARNING" # Log the complete configuration at INFO level when the actor system is started. # This is useful when you are uncertain of what configuration is used. log-config-on-start = off # Log at info level when messages are sent to dead letters, or published to # eventStream as `DeadLetter`, `Dropped` or `UnhandledMessage`. # Possible values: # on: all dead letters are logged # off: no logging of dead letters # n: positive integer, number of dead letters that will be logged log-dead-letters = 10 # Possibility to turn off logging of dead letters while the actor system # is shutting down. Logging is only done when enabled by 'log-dead-letters' # setting. log-dead-letters-during-shutdown = off # When log-dead-letters is enabled, this will re-enable the logging after configured duration. # infinite: suspend the logging forever; # or a duration (eg: 5 minutes), after which the logging will be re-enabled. log-dead-letters-suspend-duration = 5 minutes # List FQCN of extensions which shall be loaded at actor system startup. # Library extensions are regular extensions that are loaded at startup and are # available for third party library authors to enable auto-loading of extensions when # present on the classpath. This is done by appending entries: # 'library-extensions += "Extension"' in the library `reference.conf`. # # Should not be set by end user applications in 'application.conf', use the extensions property for that # library-extensions = ${?akka.library-extensions} ["akka.serialization.SerializationExtension$"] # List FQCN of extensions which shall be loaded at actor system startup. # Should be on the format: 'extensions = ["foo", "bar"]' etc. # See the Akka Documentation for more info about Extensions extensions = [] # Toggles whether threads created by this ActorSystem should be daemons or not daemonic = off # JVM shutdown, System.exit(-1), in case of a fatal error, # such as OutOfMemoryError jvm-exit-on-fatal-error = on # Akka installs JVM shutdown hooks by default, e.g. in CoordinatedShutdown and Artery. This property will # not disable user-provided hooks registered using `CoordinatedShutdown#addCancellableJvmShutdownHook`. # This property is related to `akka.coordinated-shutdown.run-by-jvm-shutdown-hook` below. # This property makes it possible to disable all such hooks if the application itself # or a higher level framework such as Play prefers to install the JVM shutdown hook and # terminate the ActorSystem itself, with or without using CoordinatedShutdown. jvm-shutdown-hooks = on # Version must be the same across all modules and if they are different the startup # will fail. It's possible but not recommended, to disable this check, and only log a warning, # by setting this property to `off`. fail-mixed-versions = on actor { # Either one of "local", "remote" or "cluster" or the # FQCN of the ActorRefProvider to be used; the below is the built-in default, # note that "remote" and "cluster" requires the akka-remote and akka-cluster # artifacts to be on the classpath. provider = "local" # The guardian "/user" will use this class to obtain its supervisorStrategy. # It needs to be a subclass of akka.actor.SupervisorStrategyConfigurator. # In addition to the default there is akka.actor.StoppingSupervisorStrategy. guardian-supervisor-strategy = "akka.actor.DefaultSupervisorStrategy" # Timeout for Extension creation and a few other potentially blocking # initialization tasks. creation-timeout = 20s # Serializes and deserializes (non-primitive) messages to ensure immutability, # this is only intended for testing. serialize-messages = off # Serializes and deserializes creators (in Props) to ensure that they can be # sent over the network, this is only intended for testing. Purely local deployments # as marked with deploy.scope == LocalScope are exempt from verification. serialize-creators = off # If serialize-messages or serialize-creators are enabled classes that starts with # a prefix listed here are not verified. no-serialization-verification-needed-class-prefix = ["akka."] # Timeout for send operations to top-level actors which are in the process # of being started. This is only relevant if using a bounded mailbox or the # CallingThreadDispatcher for a top-level actor. unstarted-push-timeout = 10s # Mapping between ´deployment.router' short names to fully qualified class names router.type-mapping { from-code = "akka.routing.NoRouter" round-robin-pool = "akka.routing.RoundRobinPool" round-robin-group = "akka.routing.RoundRobinGroup" random-pool = "akka.routing.RandomPool" random-group = "akka.routing.RandomGroup" balancing-pool = "akka.routing.BalancingPool" smallest-mailbox-pool = "akka.routing.SmallestMailboxPool" broadcast-pool = "akka.routing.BroadcastPool" broadcast-group = "akka.routing.BroadcastGroup" scatter-gather-pool = "akka.routing.ScatterGatherFirstCompletedPool" scatter-gather-group = "akka.routing.ScatterGatherFirstCompletedGroup" tail-chopping-pool = "akka.routing.TailChoppingPool" tail-chopping-group = "akka.routing.TailChoppingGroup" consistent-hashing-pool = "akka.routing.ConsistentHashingPool" consistent-hashing-group = "akka.routing.ConsistentHashingGroup" } deployment { # deployment id pattern - on the format: /parent/child etc. default { # The id of the dispatcher to use for this actor. # If undefined or empty the dispatcher specified in code # (Props.withDispatcher) is used, or default-dispatcher if not # specified at all. dispatcher = "" # The id of the mailbox to use for this actor. # If undefined or empty the default mailbox of the configured dispatcher # is used or if there is no mailbox configuration the mailbox specified # in code (Props.withMailbox) is used. # If there is a mailbox defined in the configured dispatcher then that # overrides this setting. mailbox = "" # routing (load-balance) scheme to use # - available: "from-code", "round-robin", "random", "smallest-mailbox", # "scatter-gather", "broadcast" # - or: Fully qualified class name of the router class. # The class must extend akka.routing.CustomRouterConfig and # have a public constructor with com.typesafe.config.Config # and optional akka.actor.DynamicAccess parameter. # - default is "from-code"; # Whether or not an actor is transformed to a Router is decided in code # only (Props.withRouter). The type of router can be overridden in the # configuration; specifying "from-code" means that the values specified # in the code shall be used. # In case of routing, the actors to be routed to can be specified # in several ways: # - nr-of-instances: will create that many children # - routees.paths: will route messages to these paths using ActorSelection, # i.e. will not create children # - resizer: dynamically resizable number of routees as specified in # resizer below router = "from-code" # number of children to create in case of a router; # this setting is ignored if routees.paths is given nr-of-instances = 1 # within is the timeout used for routers containing future calls within = 5 seconds # number of virtual nodes per node for consistent-hashing router virtual-nodes-factor = 10 tail-chopping-router { # interval is duration between sending message to next routee interval = 10 milliseconds } routees { # Alternatively to giving nr-of-instances you can specify the full # paths of those actors which should be routed to. This setting takes # precedence over nr-of-instances paths = [] } # To use a dedicated dispatcher for the routees of the pool you can # define the dispatcher configuration inline with the property name # 'pool-dispatcher' in the deployment section of the router. # For example: # pool-dispatcher { # fork-join-executor.parallelism-min = 5 # fork-join-executor.parallelism-max = 5 # } # Routers with dynamically resizable number of routees; this feature is # enabled by including (parts of) this section in the deployment resizer { enabled = off # The fewest number of routees the router should ever have. lower-bound = 1 # The most number of routees the router should ever have. # Must be greater than or equal to lower-bound. upper-bound = 10 # Threshold used to evaluate if a routee is considered to be busy # (under pressure). Implementation depends on this value (default is 1). # 0: number of routees currently processing a message. # 1: number of routees currently processing a message has # some messages in mailbox. # > 1: number of routees with at least the configured pressure-threshold # messages in their mailbox. Note that estimating mailbox size of # default UnboundedMailbox is O(N) operation. pressure-threshold = 1 # Percentage to increase capacity whenever all routees are busy. # For example, 0.2 would increase 20% (rounded up), i.e. if current # capacity is 6 it will request an increase of 2 more routees. rampup-rate = 0.2 # Minimum fraction of busy routees before backing off. # For example, if this is 0.3, then we'll remove some routees only when # less than 30% of routees are busy, i.e. if current capacity is 10 and # 3 are busy then the capacity is unchanged, but if 2 or less are busy # the capacity is decreased. # Use 0.0 or negative to avoid removal of routees. backoff-threshold = 0.3 # Fraction of routees to be removed when the resizer reaches the # backoffThreshold. # For example, 0.1 would decrease 10% (rounded up), i.e. if current # capacity is 9 it will request an decrease of 1 routee. backoff-rate = 0.1 # Number of messages between resize operation. # Use 1 to resize before each message. messages-per-resize = 10 } # Routers with dynamically resizable number of routees based on # performance metrics. # This feature is enabled by including (parts of) this section in # the deployment, cannot be enabled together with default resizer. optimal-size-exploring-resizer { enabled = off # The fewest number of routees the router should ever have. lower-bound = 1 # The most number of routees the router should ever have. # Must be greater than or equal to lower-bound. upper-bound = 10 # probability of doing a ramping down when all routees are busy # during exploration. chance-of-ramping-down-when-full = 0.2 # Interval between each resize attempt action-interval = 5s # If the routees have not been fully utilized (i.e. all routees busy) # for such length, the resizer will downsize the pool. downsize-after-underutilized-for = 72h # Duration exploration, the ratio between the largest step size and # current pool size. E.g. if the current pool size is 50, and the # explore-step-size is 0.1, the maximum pool size change during # exploration will be +- 5 explore-step-size = 0.1 # Probability of doing an exploration v.s. optimization. chance-of-exploration = 0.4 # When downsizing after a long streak of under-utilization, the resizer # will downsize the pool to the highest utilization multiplied by a # a downsize ratio. This downsize ratio determines the new pools size # in comparison to the highest utilization. # E.g. if the highest utilization is 10, and the down size ratio # is 0.8, the pool will be downsized to 8 downsize-ratio = 0.8 # When optimizing, the resizer only considers the sizes adjacent to the # current size. This number indicates how many adjacent sizes to consider. optimization-range = 16 # The weight of the latest metric over old metrics when collecting # performance metrics. # E.g. if the last processing speed is 10 millis per message at pool # size 5, and if the new processing speed collected is 6 millis per # message at pool size 5. Given a weight of 0.3, the metrics # representing pool size 5 will be 6 * 0.3 + 10 * 0.7, i.e. 8.8 millis # Obviously, this number should be between 0 and 1. weight-of-latest-metric = 0.5 } } "/IO-DNS/inet-address" { mailbox = "unbounded" router = "consistent-hashing-pool" nr-of-instances = 4 } "/IO-DNS/inet-address/*" { dispatcher = "akka.actor.default-blocking-io-dispatcher" } "/IO-DNS/async-dns" { mailbox = "unbounded" router = "round-robin-pool" nr-of-instances = 1 } } default-dispatcher { # Must be one of the following # Dispatcher, PinnedDispatcher, or a FQCN to a class inheriting # MessageDispatcherConfigurator with a public constructor with # both com.typesafe.config.Config parameter and # akka.dispatch.DispatcherPrerequisites parameters. # PinnedDispatcher must be used together with executor=thread-pool-executor. type = "Dispatcher" # Which kind of ExecutorService to use for this dispatcher # Valid options: # - "default-executor" requires a "default-executor" section # - "fork-join-executor" requires a "fork-join-executor" section # - "thread-pool-executor" requires a "thread-pool-executor" section # - "affinity-pool-executor" requires an "affinity-pool-executor" section # - A FQCN of a class extending ExecutorServiceConfigurator executor = "default-executor" # This will be used if you have set "executor = "default-executor"". # If an ActorSystem is created with a given ExecutionContext, this # ExecutionContext will be used as the default executor for all # dispatchers in the ActorSystem configured with # executor = "default-executor". Note that "default-executor" # is the default value for executor, and therefore used if not # specified otherwise. If no ExecutionContext is given, # the executor configured in "fallback" will be used. default-executor { fallback = "fork-join-executor" } # This will be used if you have set "executor = "affinity-pool-executor"" # Underlying thread pool implementation is akka.dispatch.affinity.AffinityPool. # This executor is classified as "ApiMayChange". affinity-pool-executor { # Min number of threads to cap factor-based parallelism number to parallelism-min = 4 # The parallelism factor is used to determine thread pool size using the # following formula: ceil(available processors * factor). Resulting size # is then bounded by the parallelism-min and parallelism-max values. parallelism-factor = 0.8 # Max number of threads to cap factor-based parallelism number to. parallelism-max = 64 # Each worker in the pool uses a separate bounded MPSC queue. This value # indicates the upper bound of the queue. Whenever an attempt to enqueue # a task is made and the queue does not have capacity to accommodate # the task, the rejection handler created by the rejection handler specified # in "rejection-handler" is invoked. task-queue-size = 512 # FQCN of the Rejection handler used in the pool. # Must have an empty public constructor and must # implement akka.actor.affinity.RejectionHandlerFactory. rejection-handler = "akka.dispatch.affinity.ThrowOnOverflowRejectionHandler" # Level of CPU time used, on a scale between 1 and 10, during backoff/idle. # The tradeoff is that to have low latency more CPU time must be used to be # able to react quickly on incoming messages or send as fast as possible after # backoff backpressure. # Level 1 strongly prefer low CPU consumption over low latency. # Level 10 strongly prefer low latency over low CPU consumption. idle-cpu-level = 5 # FQCN of the akka.dispatch.affinity.QueueSelectorFactory. # The Class of the FQCN must have a public constructor with a # (com.typesafe.config.Config) parameter. # A QueueSelectorFactory create instances of akka.dispatch.affinity.QueueSelector, # that is responsible for determining which task queue a Runnable should be enqueued in. queue-selector = "akka.dispatch.affinity.FairDistributionHashCache" # When using the "akka.dispatch.affinity.FairDistributionHashCache" queue selector # internally the AffinityPool uses two methods to determine which task # queue to allocate a Runnable to: # - map based - maintains a round robin counter and a map of Runnable # hashcodes to queues that they have been associated with. This ensures # maximum fairness in terms of work distribution, meaning that each worker # will get approximately equal amount of mailboxes to execute. This is suitable # in cases where we have a small number of actors that will be scheduled on # the pool and we want to ensure the maximum possible utilization of the # available threads. # - hash based - the task - queue in which the runnable should go is determined # by using an uniformly distributed int to int hash function which uses the # hash code of the Runnable as an input. This is preferred in situations where we # have enough number of distinct actors to ensure statistically uniform # distribution of work across threads or we are ready to sacrifice the # former for the added benefit of avoiding map look-ups. fair-work-distribution { # The value serves as a threshold which determines the point at which the # pool switches from the first to the second work distribution schemes. # For example, if the value is set to 128, the pool can observe up to # 128 unique actors and schedule their mailboxes using the map based # approach. Once this number is reached the pool switches to hash based # task distribution mode. If the value is set to 0, the map based # work distribution approach is disabled and only the hash based is # used irrespective of the number of unique actors. Valid range is # 0 to 2048 (inclusive) threshold = 128 } } # This will be used if you have set "executor = "fork-join-executor"" # Underlying thread pool implementation is java.util.concurrent.ForkJoinPool fork-join-executor { # Min number of threads to cap factor-based parallelism number to parallelism-min = 8 # The parallelism factor is used to determine thread pool size using the # following formula: ceil(available processors * factor). Resulting size # is then bounded by the parallelism-min and parallelism-max values. parallelism-factor = 1.0 # Max number of threads to cap factor-based parallelism number to parallelism-max = 64 # Setting to "FIFO" to use queue like peeking mode which "poll" or "LIFO" to use stack # like peeking mode which "pop". task-peeking-mode = "FIFO" } # This will be used if you have set "executor = "thread-pool-executor"" # Underlying thread pool implementation is java.util.concurrent.ThreadPoolExecutor thread-pool-executor { # Keep alive time for threads keep-alive-time = 60s # Define a fixed thread pool size with this property. The corePoolSize # and the maximumPoolSize of the ThreadPoolExecutor will be set to this # value, if it is defined. Then the other pool-size properties will not # be used. # # Valid values are: `off` or a positive integer. fixed-pool-size = off # Min number of threads to cap factor-based corePoolSize number to core-pool-size-min = 8 # The core-pool-size-factor is used to determine corePoolSize of the # ThreadPoolExecutor using the following formula: # ceil(available processors * factor). # Resulting size is then bounded by the core-pool-size-min and # core-pool-size-max values. core-pool-size-factor = 3.0 # Max number of threads to cap factor-based corePoolSize number to core-pool-size-max = 64 # Minimum number of threads to cap factor-based maximumPoolSize number to max-pool-size-min = 8 # The max-pool-size-factor is used to determine maximumPoolSize of the # ThreadPoolExecutor using the following formula: # ceil(available processors * factor) # The maximumPoolSize will not be less than corePoolSize. # It is only used if using a bounded task queue. max-pool-size-factor = 3.0 # Max number of threads to cap factor-based maximumPoolSize number to max-pool-size-max = 64 # Specifies the bounded capacity of the task queue (< 1 == unbounded) task-queue-size = -1 # Specifies which type of task queue will be used, can be "array" or # "linked" (default) task-queue-type = "linked" # Allow core threads to time out allow-core-timeout = on } # How long time the dispatcher will wait for new actors until it shuts down shutdown-timeout = 1s # Throughput defines the number of messages that are processed in a batch # before the thread is returned to the pool. Set to 1 for as fair as possible. throughput = 5 # Throughput deadline for Dispatcher, set to 0 or negative for no deadline throughput-deadline-time = 0ms # For BalancingDispatcher: If the balancing dispatcher should attempt to # schedule idle actors using the same dispatcher when a message comes in, # and the dispatchers ExecutorService is not fully busy already. attempt-teamwork = on # If this dispatcher requires a specific type of mailbox, specify the # fully-qualified class name here; the actually created mailbox will # be a subtype of this type. The empty string signifies no requirement. mailbox-requirement = "" } # Default separate internal dispatcher to run Akka internal tasks and actors on # protecting them against starvation because of accidental blocking in user actors (which run on the # default dispatcher) internal-dispatcher { type = "Dispatcher" executor = "fork-join-executor" throughput = 5 fork-join-executor { parallelism-min = 4 parallelism-factor = 1.0 parallelism-max = 64 } } default-blocking-io-dispatcher { type = "Dispatcher" executor = "thread-pool-executor" throughput = 1 thread-pool-executor { fixed-pool-size = 16 } } default-mailbox { # FQCN of the MailboxType. The Class of the FQCN must have a public # constructor with # (akka.actor.ActorSystem.Settings, com.typesafe.config.Config) parameters. mailbox-type = "akka.dispatch.UnboundedMailbox" # If the mailbox is bounded then it uses this setting to determine its # capacity. The provided value must be positive. # NOTICE: # Up to version 2.1 the mailbox type was determined based on this setting; # this is no longer the case, the type must explicitly be a bounded mailbox. mailbox-capacity = 1000 # If the mailbox is bounded then this is the timeout for enqueueing # in case the mailbox is full. Negative values signify infinite # timeout, which should be avoided as it bears the risk of dead-lock. mailbox-push-timeout-time = 10s # For Actor with Stash: The default capacity of the stash. # If negative (or zero) then an unbounded stash is used (default) # If positive then a bounded stash is used and the capacity is set using # the property stash-capacity = -1 } mailbox { # Mapping between message queue semantics and mailbox configurations. # Used by akka.dispatch.RequiresMessageQueue[T] to enforce different # mailbox types on actors. # If your Actor implements RequiresMessageQueue[T], then when you create # an instance of that actor its mailbox type will be decided by looking # up a mailbox configuration via T in this mapping requirements { "akka.dispatch.UnboundedMessageQueueSemantics" = akka.actor.mailbox.unbounded-queue-based "akka.dispatch.BoundedMessageQueueSemantics" = akka.actor.mailbox.bounded-queue-based "akka.dispatch.DequeBasedMessageQueueSemantics" = akka.actor.mailbox.unbounded-deque-based "akka.dispatch.UnboundedDequeBasedMessageQueueSemantics" = akka.actor.mailbox.unbounded-deque-based "akka.dispatch.BoundedDequeBasedMessageQueueSemantics" = akka.actor.mailbox.bounded-deque-based "akka.dispatch.MultipleConsumerSemantics" = akka.actor.mailbox.unbounded-queue-based "akka.dispatch.ControlAwareMessageQueueSemantics" = akka.actor.mailbox.unbounded-control-aware-queue-based "akka.dispatch.UnboundedControlAwareMessageQueueSemantics" = akka.actor.mailbox.unbounded-control-aware-queue-based "akka.dispatch.BoundedControlAwareMessageQueueSemantics" = akka.actor.mailbox.bounded-control-aware-queue-based "akka.event.LoggerMessageQueueSemantics" = akka.actor.mailbox.logger-queue } unbounded-queue-based { # FQCN of the MailboxType, The Class of the FQCN must have a public # constructor with (akka.actor.ActorSystem.Settings, # com.typesafe.config.Config) parameters. mailbox-type = "akka.dispatch.UnboundedMailbox" } bounded-queue-based { # FQCN of the MailboxType, The Class of the FQCN must have a public # constructor with (akka.actor.ActorSystem.Settings, # com.typesafe.config.Config) parameters. mailbox-type = "akka.dispatch.BoundedMailbox" } unbounded-deque-based { # FQCN of the MailboxType, The Class of the FQCN must have a public # constructor with (akka.actor.ActorSystem.Settings, # com.typesafe.config.Config) parameters. mailbox-type = "akka.dispatch.UnboundedDequeBasedMailbox" } bounded-deque-based { # FQCN of the MailboxType, The Class of the FQCN must have a public # constructor with (akka.actor.ActorSystem.Settings, # com.typesafe.config.Config) parameters. mailbox-type = "akka.dispatch.BoundedDequeBasedMailbox" } unbounded-control-aware-queue-based { # FQCN of the MailboxType, The Class of the FQCN must have a public # constructor with (akka.actor.ActorSystem.Settings, # com.typesafe.config.Config) parameters. mailbox-type = "akka.dispatch.UnboundedControlAwareMailbox" } bounded-control-aware-queue-based { # FQCN of the MailboxType, The Class of the FQCN must have a public # constructor with (akka.actor.ActorSystem.Settings, # com.typesafe.config.Config) parameters. mailbox-type = "akka.dispatch.BoundedControlAwareMailbox" } # The LoggerMailbox will drain all messages in the mailbox # when the system is shutdown and deliver them to the StandardOutLogger. # Do not change this unless you know what you are doing. logger-queue { mailbox-type = "akka.event.LoggerMailboxType" } } debug { # enable function of Actor.loggable(), which is to log any received message # at DEBUG level, see the “Testing Actor Systems” section of the Akka # Documentation at https://akka.io/docs receive = off # enable DEBUG logging of all AutoReceiveMessages (Kill, PoisonPill etc.) autoreceive = off # enable DEBUG logging of actor lifecycle changes lifecycle = off # enable DEBUG logging of all LoggingFSMs for events, transitions and timers fsm = off # enable DEBUG logging of subscription changes on the eventStream event-stream = off # enable DEBUG logging of unhandled messages unhandled = off # enable WARN logging of misconfigured routers router-misconfiguration = off } # SECURITY BEST-PRACTICE is to disable java serialization for its multiple # known attack surfaces. # # This setting is a short-cut to # - using DisabledJavaSerializer instead of JavaSerializer # # Completely disable the use of `akka.serialization.JavaSerialization` by the # Akka Serialization extension, instead DisabledJavaSerializer will # be inserted which will fail explicitly if attempts to use java serialization are made. # # The log messages emitted by such serializer SHOULD be treated as potential # attacks which the serializer prevented, as they MAY indicate an external operator # attempting to send malicious messages intending to use java serialization as attack vector. # The attempts are logged with the SECURITY marker. # # Please note that this option does not stop you from manually invoking java serialization # allow-java-serialization = off # Log warnings when the Java serialization is used to serialize messages. # Java serialization is not very performant and should not be used in production # environments unless you don't care about performance and security. In that case # you can turn this off. warn-about-java-serializer-usage = on # To be used with the above warn-about-java-serializer-usage # When warn-about-java-serializer-usage = on, and this warn-on-no-serialization-verification = off, # warnings are suppressed for classes extending NoSerializationVerificationNeeded # to reduce noise. warn-on-no-serialization-verification = on # Entries for pluggable serializers and their bindings. serializers { java = "akka.serialization.JavaSerializer" bytes = "akka.serialization.ByteArraySerializer" primitive-long = "akka.serialization.LongSerializer" primitive-int = "akka.serialization.IntSerializer" primitive-string = "akka.serialization.StringSerializer" primitive-bytestring = "akka.serialization.ByteStringSerializer" primitive-boolean = "akka.serialization.BooleanSerializer" } # Class to Serializer binding. You only need to specify the name of an # interface or abstract base class of the messages. In case of ambiguity it # is using the most specific configured class, or giving a warning and # choosing the “first” one. # # To disable one of the default serializers, assign its class to "none", like # "java.io.Serializable" = none serialization-bindings { "[B" = bytes "java.io.Serializable" = java "java.lang.String" = primitive-string "akka.util.ByteString$ByteString1C" = primitive-bytestring "akka.util.ByteString$ByteString1" = primitive-bytestring "akka.util.ByteString$ByteStrings" = primitive-bytestring "java.lang.Long" = primitive-long "scala.Long" = primitive-long "java.lang.Integer" = primitive-int "scala.Int" = primitive-int "java.lang.Boolean" = primitive-boolean "scala.Boolean" = primitive-boolean } # Configuration namespace of serialization identifiers. # Each serializer implementation must have an entry in the following format: # `akka.actor.serialization-identifiers."FQCN" = ID` # where `FQCN` is fully qualified class name of the serializer implementation # and `ID` is globally unique serializer identifier number. # Identifier values from 0 to 40 are reserved for Akka internal usage. serialization-identifiers { "akka.serialization.JavaSerializer" = 1 "akka.serialization.ByteArraySerializer" = 4 primitive-long = 18 primitive-int = 19 primitive-string = 20 primitive-bytestring = 21 primitive-boolean = 35 } } serialization.protobuf { # deprecated, use `allowed-classes` instead whitelist-class = [ "com.google.protobuf.GeneratedMessage", "com.google.protobuf.GeneratedMessageV3", "scalapb.GeneratedMessageCompanion", "akka.protobufv3.internal.GeneratedMessageV3" ] # Additional classes that are allowed even if they are not defined in `serialization-bindings`. # It can be exact class name or name of super class or interfaces (one level). # This is useful when a class is not used for serialization any more and therefore removed # from `serialization-bindings`, but should still be possible to deserialize. allowed-classes = ${akka.serialization.protobuf.whitelist-class} } # Used to set the behavior of the scheduler. # Changing the default values may change the system behavior drastically so make # sure you know what you're doing! See the Scheduler section of the Akka # Documentation for more details. scheduler { # The LightArrayRevolverScheduler is used as the default scheduler in the # system. It does not execute the scheduled tasks on exact time, but on every # tick, it will run everything that is (over)due. You can increase or decrease # the accuracy of the execution timing by specifying smaller or larger tick # duration. If you are scheduling a lot of tasks you should consider increasing # the ticks per wheel. # Note that it might take up to 1 tick to stop the Timer, so setting the # tick-duration to a high value will make shutting down the actor system # take longer. tick-duration = 10ms # The timer uses a circular wheel of buckets to store the timer tasks. # This should be set such that the majority of scheduled timeouts (for high # scheduling frequency) will be shorter than one rotation of the wheel # (ticks-per-wheel * ticks-duration) # THIS MUST BE A POWER OF TWO! ticks-per-wheel = 512 # This setting selects the timer implementation which shall be loaded at # system start-up. # The class given here must implement the akka.actor.Scheduler interface # and offer a public constructor which takes three arguments: # 1) com.typesafe.config.Config # 2) akka.event.LoggingAdapter # 3) java.util.concurrent.ThreadFactory implementation = akka.actor.LightArrayRevolverScheduler # When shutting down the scheduler, there will typically be a thread which # needs to be stopped, and this timeout determines how long to wait for # that to happen. In case of timeout the shutdown of the actor system will # proceed without running possibly still enqueued tasks. shutdown-timeout = 5s } # How frequent the clock for recency-based strategies is updated. Can be set to 0 for usage of # `System.nanoTime` for each call but that might have some overhead for high message throughput. scheduled-clock-interval = 1 s io { # By default the select loops run on dedicated threads, hence using a # PinnedDispatcher pinned-dispatcher { type = "PinnedDispatcher" executor = "thread-pool-executor" thread-pool-executor.allow-core-timeout = off } tcp { # The number of selectors to stripe the served channels over; each of # these will use one select loop on the selector-dispatcher. nr-of-selectors = 1 # Maximum number of open channels supported by this TCP module; there is # no intrinsic general limit, this setting is meant to enable DoS # protection by limiting the number of concurrently connected clients. # Also note that this is a "soft" limit; in certain cases the implementation # will accept a few connections more or a few less than the number configured # here. Must be an integer > 0 or "unlimited". max-channels = 256000 # When trying to assign a new connection to a selector and the chosen # selector is at full capacity, retry selector choosing and assignment # this many times before giving up selector-association-retries = 10 # The maximum number of connection that are accepted in one go, # higher numbers decrease latency, lower numbers increase fairness on # the worker-dispatcher batch-accept-limit = 10 # The number of bytes per direct buffer in the pool used to read or write # network data from the kernel. direct-buffer-size = 128 KiB # The maximal number of direct buffers kept in the direct buffer pool for # reuse. direct-buffer-pool-limit = 1000 # The duration a connection actor waits for a `Register` message from # its commander before aborting the connection. register-timeout = 5s # The maximum number of bytes delivered by a `Received` message. Before # more data is read from the network the connection actor will try to # do other work. # The purpose of this setting is to impose a smaller limit than the # configured receive buffer size. When using value 'unlimited' it will # try to read all from the receive buffer. max-received-message-size = unlimited # Enable fine grained logging of what goes on inside the implementation. # Be aware that this may log more than once per message sent to the actors # of the tcp implementation. trace-logging = off # Fully qualified config path which holds the dispatcher configuration # to be used for running the select() calls in the selectors selector-dispatcher = "akka.io.pinned-dispatcher" # Fully qualified config path which holds the dispatcher configuration # for the read/write worker actors worker-dispatcher = "akka.actor.internal-dispatcher" # Fully qualified config path which holds the dispatcher configuration # for the selector management actors management-dispatcher = "akka.actor.internal-dispatcher" # Fully qualified config path which holds the dispatcher configuration # on which file IO tasks are scheduled file-io-dispatcher = "akka.actor.default-blocking-io-dispatcher" # The maximum number of bytes (or "unlimited") to transfer in one batch # when using `WriteFile` command which uses `FileChannel.transferTo` to # pipe files to a TCP socket. On some OS like Linux `FileChannel.transferTo` # may block for a long time when network IO is faster than file IO. # Decreasing the value may improve fairness while increasing may improve # throughput. file-io-transferTo-limit = 512 KiB # The number of times to retry the `finishConnect` call after being notified about # OP_CONNECT. Retries are needed if the OP_CONNECT notification doesn't imply that # `finishConnect` will succeed, which is the case on Android. finish-connect-retries = 5 # On Windows connection aborts are not reliably detected unless an OP_READ is # registered on the selector _after_ the connection has been reset. This # workaround enables an OP_CONNECT which forces the abort to be visible on Windows. # Enabling this setting on other platforms than Windows will cause various failures # and undefined behavior. # Possible values of this key are on, off and auto where auto will enable the # workaround if Windows is detected automatically. windows-connection-abort-workaround-enabled = off } udp { # The number of selectors to stripe the served channels over; each of # these will use one select loop on the selector-dispatcher. nr-of-selectors = 1 # Maximum number of open channels supported by this UDP module Generally # UDP does not require a large number of channels, therefore it is # recommended to keep this setting low. max-channels = 4096 # The select loop can be used in two modes: # - setting "infinite" will select without a timeout, hogging a thread # - setting a positive timeout will do a bounded select call, # enabling sharing of a single thread between multiple selectors # (in this case you will have to use a different configuration for the # selector-dispatcher, e.g. using "type=Dispatcher" with size 1) # - setting it to zero means polling, i.e. calling selectNow() select-timeout = infinite # When trying to assign a new connection to a selector and the chosen # selector is at full capacity, retry selector choosing and assignment # this many times before giving up selector-association-retries = 10 # The maximum number of datagrams that are read in one go, # higher numbers decrease latency, lower numbers increase fairness on # the worker-dispatcher receive-throughput = 3 # The number of bytes per direct buffer in the pool used to read or write # network data from the kernel. direct-buffer-size = 128 KiB # The maximal number of direct buffers kept in the direct buffer pool for # reuse. direct-buffer-pool-limit = 1000 # Enable fine grained logging of what goes on inside the implementation. # Be aware that this may log more than once per message sent to the actors # of the tcp implementation. trace-logging = off # Fully qualified config path which holds the dispatcher configuration # to be used for running the select() calls in the selectors selector-dispatcher = "akka.io.pinned-dispatcher" # Fully qualified config path which holds the dispatcher configuration # for the read/write worker actors worker-dispatcher = "akka.actor.internal-dispatcher" # Fully qualified config path which holds the dispatcher configuration # for the selector management actors management-dispatcher = "akka.actor.internal-dispatcher" } udp-connected { # The number of selectors to stripe the served channels over; each of # these will use one select loop on the selector-dispatcher. nr-of-selectors = 1 # Maximum number of open channels supported by this UDP module Generally # UDP does not require a large number of channels, therefore it is # recommended to keep this setting low. max-channels = 4096 # The select loop can be used in two modes: # - setting "infinite" will select without a timeout, hogging a thread # - setting a positive timeout will do a bounded select call, # enabling sharing of a single thread between multiple selectors # (in this case you will have to use a different configuration for the # selector-dispatcher, e.g. using "type=Dispatcher" with size 1) # - setting it to zero means polling, i.e. calling selectNow() select-timeout = infinite # When trying to assign a new connection to a selector and the chosen # selector is at full capacity, retry selector choosing and assignment # this many times before giving up selector-association-retries = 10 # The maximum number of datagrams that are read in one go, # higher numbers decrease latency, lower numbers increase fairness on # the worker-dispatcher receive-throughput = 3 # The number of bytes per direct buffer in the pool used to read or write # network data from the kernel. direct-buffer-size = 128 KiB # The maximal number of direct buffers kept in the direct buffer pool for # reuse. direct-buffer-pool-limit = 1000 # Enable fine grained logging of what goes on inside the implementation. # Be aware that this may log more than once per message sent to the actors # of the tcp implementation. trace-logging = off # Fully qualified config path which holds the dispatcher configuration # to be used for running the select() calls in the selectors selector-dispatcher = "akka.io.pinned-dispatcher" # Fully qualified config path which holds the dispatcher configuration # for the read/write worker actors worker-dispatcher = "akka.actor.internal-dispatcher" # Fully qualified config path which holds the dispatcher configuration # for the selector management actors management-dispatcher = "akka.actor.internal-dispatcher" } dns { # Fully qualified config path which holds the dispatcher configuration # for the manager and resolver router actors. # For actual router configuration see akka.actor.deployment./IO-DNS/* dispatcher = "akka.actor.internal-dispatcher" # Name of the subconfig at path akka.io.dns, see inet-address below # # Change to `async-dns` to use the new "native" DNS resolver, # which is also capable of resolving SRV records. resolver = "inet-address" # To-be-deprecated DNS resolver implementation which uses the Java InetAddress to resolve DNS records. # To be replaced by `akka.io.dns.async` which implements the DNS protocol natively and without blocking (which InetAddress does) inet-address { # This configuration entry is deprecated since Akka 2.6.0 and functionality for defining a custom provider # will be removed in a future Akka version provider-object = "akka.io.InetAddressDnsProvider" # To set the time to cache name resolutions # Possible values: # default: sun.net.InetAddressCachePolicy.get() and getNegative() # forever: cache forever # never: no caching # n [time unit]: positive timeout with unit, for example 30s positive-ttl = default negative-ttl = default # How often to sweep out expired cache entries. # Note that this interval has nothing to do with TTLs cache-cleanup-interval = 120s } async-dns { # This configuration entry is deprecated since Akka 2.6.0 and functionality for defining a custom provider # will be removed in a future Akka version provider-object = "akka.io.dns.internal.AsyncDnsProvider" # Set upper bound for caching successfully resolved dns entries # if the DNS record has a smaller TTL value than the setting that # will be used. Default is to use the record TTL with no cap. # Possible values: # forever: always use the minimum TTL from the found records # never: never cache # n [time unit] = cap the caching to this value positive-ttl = forever # Set how long the fact that a DNS record could not be found is # cached. If a new resolution is done while the fact is cached it will # be failed and not result in an actual DNS resolution. Default is # to never cache. # Possible values: # never: never cache # forever: cache a missing DNS record forever (you probably will not want to do this) # n [time unit] = cache for this long negative-ttl = never # Configures nameservers to query during DNS resolution. # Defaults to the nameservers that would be used by the JVM by default. # Set to a list of IPs to override the servers, e.g. [ "8.8.8.8", "8.8.4.4" ] for Google's servers # If multiple are defined then they are tried in order until one responds nameservers = default # The time that a request is allowed to live before being discarded # given no reply. The lower bound of this should always be the amount # of time to reasonably expect a DNS server to reply within. # If multiple name servers are provided then each gets this long to response before trying # the next one resolve-timeout = 5s # How often to sweep out expired cache entries. # Note that this interval has nothing to do with TTLs cache-cleanup-interval = 120s # Configures the list of search domains. # Defaults to a system dependent lookup (on Unix like OSes, will attempt to parse /etc/resolv.conf, on # other platforms, will not make any attempt to lookup the search domains). Set to a single domain, or # a list of domains, eg, [ "example.com", "example.net" ]. search-domains = default # Any hosts that have a number of dots less than this will not be looked up directly, instead, a search on # the search domains will be tried first. This corresponds to the ndots option in /etc/resolv.conf, see # https://linux.die.net/man/5/resolver for more info. # Defaults to a system dependent lookup (on Unix like OSes, will attempt to parse /etc/resolv.conf, on # other platforms, will default to 1). ndots = default # Which SecureRandom algorithm to use for generating DNS request IDs. The default "" or "SecureRandom" # is likely sufficient, but you may supply an alternative algorithm, in which case resolution will # proceed as in `SecureRandom.getInstance()` id-strategy = "" } } } # CoordinatedShutdown is an extension that will perform registered # tasks in the order that is defined by the phases. It is started # by calling CoordinatedShutdown(system).run(). This can be triggered # by different things, for example: # - JVM shutdown hook will by default run CoordinatedShutdown # - Cluster node will automatically run CoordinatedShutdown when it # sees itself as Exiting # - A management console or other application specific command can # run CoordinatedShutdown coordinated-shutdown { # The timeout that will be used for a phase if not specified with # 'timeout' in the phase default-phase-timeout = 5 s # Terminate the ActorSystem in the last phase actor-system-terminate. terminate-actor-system = on # Exit the JVM (System.exit(0)) in the last phase actor-system-terminate # if this is set to 'on'. It is done after termination of the # ActorSystem if terminate-actor-system=on, otherwise it is done # immediately when the last phase is reached. exit-jvm = off # Exit status to use on System.exit(int) when 'exit-jvm' is 'on'. exit-code = 0 # Run the coordinated shutdown when the JVM process exits, e.g. # via kill SIGTERM signal (SIGINT ctrl-c doesn't work). # This property is related to `akka.jvm-shutdown-hooks` above. run-by-jvm-shutdown-hook = on # Run the coordinated shutdown when ActorSystem.terminate is called. # Enabling this and disabling terminate-actor-system is not a supported # combination (will throw ConfigurationException at startup). run-by-actor-system-terminate = on # When Coordinated Shutdown is triggered an instance of `Reason` is # required. That value can be used to override the default settings. # Only 'exit-jvm', 'exit-code' and 'terminate-actor-system' may be # overridden depending on the reason. reason-overrides { # Overrides are applied using the `reason.getClass.getName`. # Overrides the `exit-code` when the `Reason` is a cluster # Downing or a Cluster Join Unsuccessful event "akka.actor.CoordinatedShutdown$ClusterDowningReason$" { exit-code = -1 } "akka.actor.CoordinatedShutdown$ClusterJoinUnsuccessfulReason$" { exit-code = -1 } } #//#coordinated-shutdown-phases # CoordinatedShutdown is enabled by default and will run the tasks that # are added to these phases by individual Akka modules and user logic. # # The phases are ordered as a DAG by defining the dependencies between the phases # to make sure shutdown tasks are run in the right order. # # In general user tasks belong in the first few phases, but there may be use # cases where you would want to hook in new phases or register tasks later in # the DAG. # # Each phase is defined as a named config section with the # following optional properties: # - timeout=15s: Override the default-phase-timeout for this phase. # - recover=off: If the phase fails the shutdown is aborted # and depending phases will not be executed. # - enabled=off: Skip all tasks registered in this phase. DO NOT use # this to disable phases unless you are absolutely sure what the # consequences are. Many of the built in tasks depend on other tasks # having been executed in earlier phases and may break if those are disabled. # depends-on=[]: Run the phase after the given phases phases { # The first pre-defined phase that applications can add tasks to. # Note that more phases can be added in the application's # configuration by overriding this phase with an additional # depends-on. before-service-unbind { } # Stop accepting new incoming connections. # This is where you can register tasks that makes a server stop accepting new connections. Already # established connections should be allowed to continue and complete if possible. service-unbind { depends-on = [before-service-unbind] } # Wait for requests that are in progress to be completed. # This is where you register tasks that will wait for already established connections to complete, potentially # also first telling them that it is time to close down. service-requests-done { depends-on = [service-unbind] } # Final shutdown of service endpoints. # This is where you would add tasks that forcefully kill connections that are still around. service-stop { depends-on = [service-requests-done] } # Phase for custom application tasks that are to be run # after service shutdown and before cluster shutdown. before-cluster-shutdown { depends-on = [service-stop] } # Graceful shutdown of the Cluster Sharding regions. # This phase is not meant for users to add tasks to. cluster-sharding-shutdown-region { timeout = 10 s depends-on = [before-cluster-shutdown] } # Emit the leave command for the node that is shutting down. # This phase is not meant for users to add tasks to. cluster-leave { depends-on = [cluster-sharding-shutdown-region] } # Shutdown cluster singletons # This is done as late as possible to allow the shard region shutdown triggered in # the "cluster-sharding-shutdown-region" phase to complete before the shard coordinator is shut down. # This phase is not meant for users to add tasks to. cluster-exiting { timeout = 10 s depends-on = [cluster-leave] } # Wait until exiting has been completed # This phase is not meant for users to add tasks to. cluster-exiting-done { depends-on = [cluster-exiting] } # Shutdown the cluster extension # This phase is not meant for users to add tasks to. cluster-shutdown { depends-on = [cluster-exiting-done] } # Phase for custom application tasks that are to be run # after cluster shutdown and before ActorSystem termination. before-actor-system-terminate { depends-on = [cluster-shutdown] } # Last phase. See terminate-actor-system and exit-jvm above. # Don't add phases that depends on this phase because the # dispatcher and scheduler of the ActorSystem have been shutdown. # This phase is not meant for users to add tasks to. actor-system-terminate { timeout = 10 s depends-on = [before-actor-system-terminate] } } #//#coordinated-shutdown-phases } #//#circuit-breaker-default # Configuration for circuit breakers created with the APIs accepting an id to # identify or look up the circuit breaker. # Note: Circuit breakers created without ids are not affected by this configuration. # A child configuration section with the same name as the circuit breaker identifier # will be used, with fallback to the `akka.circuit-breaker.default` section. circuit-breaker { # Default configuration that is used if a configuration section # with the circuit breaker identifier is not defined. default { # Number of failures before opening the circuit. max-failures = 10 # Duration of time after which to consider a call a failure. call-timeout = 10s # Duration of time in open state after which to attempt to close # the circuit, by first entering the half-open state. reset-timeout = 15s # The upper bound of reset-timeout max-reset-timeout = 36500d # Exponential backoff # For details see https://en.wikipedia.org/wiki/Exponential_backoff exponential-backoff = 1.0 # Additional random delay based on this factor is added to backoff # For example 0.2 adds up to 20% delay # In order to skip this additional delay set as 0 random-factor = 0.0 # A allowlist of fqcn of Exceptions that the CircuitBreaker # should not consider failures. By default all exceptions are # considered failures. exception-allowlist = [] } } #//#circuit-breaker-default }