(kicad_pcb (version 20171130) (host pcbnew "(5.1.9)-1")

  (general
    (thickness 1.6)
    (drawings 4)
    (tracks 243)
    (zones 0)
    (modules 28)
    (nets 20)
  )

  (page A4)
  (layers
    (0 F.Cu signal)
    (31 B.Cu signal)
    (32 B.Adhes user hide)
    (33 F.Adhes user hide)
    (34 B.Paste user hide)
    (35 F.Paste user hide)
    (36 B.SilkS user hide)
    (37 F.SilkS user hide)
    (38 B.Mask user hide)
    (39 F.Mask user hide)
    (40 Dwgs.User user hide)
    (41 Cmts.User user hide)
    (42 Eco1.User user hide)
    (43 Eco2.User user hide)
    (44 Edge.Cuts user hide)
    (45 Margin user hide)
    (46 B.CrtYd user hide)
    (47 F.CrtYd user hide)
    (48 B.Fab user hide)
    (49 F.Fab user hide)
  )

  (setup
    (last_trace_width 0.4)
    (trace_clearance 0.2)
    (zone_clearance 0.508)
    (zone_45_only no)
    (trace_min 0.2)
    (via_size 1.2)
    (via_drill 0.4)
    (via_min_size 0.4)
    (via_min_drill 0.3)
    (uvia_size 0.3)
    (uvia_drill 0.1)
    (uvias_allowed no)
    (uvia_min_size 0.2)
    (uvia_min_drill 0.1)
    (edge_width 0.05)
    (segment_width 0.2)
    (pcb_text_width 0.3)
    (pcb_text_size 1.5 1.5)
    (mod_edge_width 0.12)
    (mod_text_size 1 1)
    (mod_text_width 0.15)
    (pad_size 2.4 1)
    (pad_drill 0.65)
    (pad_to_mask_clearance 0)
    (aux_axis_origin 0 0)
    (grid_origin -14.2 -15.75)
    (visible_elements 7FFFFFFF)
    (pcbplotparams
      (layerselection 0x00000_fffffffe)
      (usegerberextensions false)
      (usegerberattributes true)
      (usegerberadvancedattributes true)
      (creategerberjobfile true)
      (excludeedgelayer false)
      (linewidth 0.100000)
      (plotframeref false)
      (viasonmask false)
      (mode 1)
      (useauxorigin false)
      (hpglpennumber 1)
      (hpglpenspeed 20)
      (hpglpendiameter 15.000000)
      (psnegative false)
      (psa4output false)
      (plotreference false)
      (plotvalue false)
      (plotinvisibletext false)
      (padsonsilk true)
      (subtractmaskfromsilk false)
      (outputformat 4)
      (mirror true)
      (drillshape 1)
      (scaleselection 1)
      (outputdirectory "output/"))
  )

  (net 0 "")
  (net 1 GND)
  (net 2 "Net-(D1-Pad2)")
  (net 3 TEMP_SENSE)
  (net 4 LOAD_B)
  (net 5 LOAD_A)
  (net 6 OLED_SDA)
  (net 7 OLED_SCL)
  (net 8 REL_SW)
  (net 9 DOWN_SET)
  (net 10 UP_SET)
  (net 11 "Net-(C4-Pad2)")
  (net 12 "Net-(C5-Pad2)")
  (net 13 VCC)
  (net 14 PRG_DTR)
  (net 15 RST)
  (net 16 PRG_TX)
  (net 17 PRG_RX)
  (net 18 /IN+)
  (net 19 /IN-)

  (net_class Default "This is the default net class."
    (clearance 0.2)
    (trace_width 0.4)
    (via_dia 1.2)
    (via_drill 0.4)
    (uvia_dia 0.3)
    (uvia_drill 0.1)
    (diff_pair_width 0.4)
    (diff_pair_gap 0.25)
    (add_net /IN+)
    (add_net /IN-)
    (add_net DOWN_SET)
    (add_net GND)
    (add_net LOAD_A)
    (add_net LOAD_B)
    (add_net "Net-(C4-Pad2)")
    (add_net "Net-(C5-Pad2)")
    (add_net "Net-(D1-Pad2)")
    (add_net "Net-(U1-Pad1)")
    (add_net "Net-(U1-Pad11)")
    (add_net "Net-(U1-Pad12)")
    (add_net "Net-(U1-Pad13)")
    (add_net "Net-(U1-Pad14)")
    (add_net "Net-(U1-Pad17)")
    (add_net "Net-(U1-Pad19)")
    (add_net "Net-(U1-Pad2)")
    (add_net "Net-(U1-Pad20)")
    (add_net "Net-(U1-Pad22)")
    (add_net "Net-(U1-Pad23)")
    (add_net "Net-(U1-Pad24)")
    (add_net "Net-(U1-Pad25)")
    (add_net "Net-(U1-Pad26)")
    (add_net "Net-(U1-Pad32)")
    (add_net "Net-(U2-Pad12)")
    (add_net OLED_SCL)
    (add_net OLED_SDA)
    (add_net PRG_DTR)
    (add_net PRG_RX)
    (add_net PRG_TX)
    (add_net REL_SW)
    (add_net RST)
    (add_net TEMP_SENSE)
    (add_net UP_SET)
    (add_net VCC)
  )

  (module parts:OLED-0.96 (layer F.Cu) (tedit 6110D916) (tstamp 61017E89)
    (at -15 -27.5)
    (descr "Through hole straight socket strip, 1x04, 2.54mm pitch, single row (from Kicad 4.0.7), script generated")
    (tags "Through hole socket strip THT 1x04 2.54mm single row")
    (path /610075DE)
    (fp_text reference M1 (at 0 -1) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value OLED-0.96 (at 0 1.5) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 -8) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -5.07 -9.83) (end -5.07 -11.735) (layer F.Fab) (width 0.1))
    (fp_line (start -5.07 -11.735) (end -4.435 -12.37) (layer F.Fab) (width 0.1))
    (fp_line (start -4.435 -12.37) (end 5.09 -12.37) (layer F.Fab) (width 0.1))
    (fp_line (start 5.09 -12.37) (end 5.09 -9.83) (layer F.Fab) (width 0.1))
    (fp_line (start 5.09 -9.83) (end -5.07 -9.83) (layer F.Fab) (width 0.1))
    (fp_line (start -2.53 -9.77) (end -2.53 -12.43) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.53 -9.77) (end 5.15 -9.77) (layer F.SilkS) (width 0.12))
    (fp_line (start 5.15 -9.77) (end 5.15 -12.43) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.53 -12.43) (end 5.15 -12.43) (layer F.SilkS) (width 0.12))
    (fp_line (start -5.13 -12.43) (end -3.8 -12.43) (layer F.SilkS) (width 0.12))
    (fp_line (start -5.13 -11.1) (end -5.13 -12.43) (layer F.SilkS) (width 0.12))
    (fp_line (start -5.6 -9.3) (end -5.6 -12.85) (layer F.CrtYd) (width 0.05))
    (fp_line (start -5.6 -12.85) (end 5.6 -12.85) (layer F.CrtYd) (width 0.05))
    (fp_line (start 5.6 -12.85) (end 5.6 -9.3) (layer F.CrtYd) (width 0.05))
    (fp_line (start 5.6 -9.3) (end -5.6 -9.3) (layer F.CrtYd) (width 0.05))
    (fp_line (start 13 -13) (end 13 13) (layer F.SilkS) (width 0.12))
    (fp_line (start 13 13) (end -13 13) (layer F.SilkS) (width 0.12))
    (fp_line (start -13 13) (end -13 -13) (layer F.SilkS) (width 0.12))
    (fp_line (start -13 -13) (end 13 -13) (layer F.SilkS) (width 0.12))
    (pad "" np_thru_hole circle (at -11 11) (size 2.8 2.8) (drill 2.8) (layers *.Cu *.Mask))
    (pad "" np_thru_hole circle (at -11 -11) (size 2.8 2.8) (drill 2.8) (layers *.Cu *.Mask))
    (pad "" np_thru_hole circle (at 11 11) (size 2.8 2.8) (drill 2.8) (layers *.Cu *.Mask))
    (pad "" np_thru_hole circle (at 11 -11) (size 2.8 2.8) (drill 2.8) (layers *.Cu *.Mask))
    (pad 4 thru_hole oval (at 3.82 -11.1 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 6 OLED_SDA))
    (pad 3 thru_hole oval (at 1.28 -11.1 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 7 OLED_SCL))
    (pad 2 thru_hole oval (at -1.26 -11.1 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 13 VCC))
    (pad 1 thru_hole rect (at -3.8 -11.1 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 1 GND))
    (model ${KISYS3DMOD}/Connector_PinSocket_2.54mm.3dshapes/PinSocket_1x04_P2.54mm_Vertical.wrl
      (offset (xyz 3.8 11.1 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 90))
    )
    (model "C:/Users/Alex/Downloads/oled-tft-0-96-inch-64x128-monochrome-i2c-1.snapshot.2/OLED TFT 0.96 inch 64x128 monochrome.STEP"
      (offset (xyz 0 12.5 9.5))
      (scale (xyz 1 1 1))
      (rotate (xyz -90 0 0))
    )
  )

  (module Crystal:Crystal_HC49-4H_Vertical (layer B.Cu) (tedit 5A1AD3B7) (tstamp 6101A087)
    (at -17.3 -15.55)
    (descr "Crystal THT HC-49-4H http://5hertz.com/pdfs/04404_D.pdf")
    (tags "THT crystalHC-49-4H")
    (path /611836C4)
    (fp_text reference Y1 (at 2.44 3.525) (layer B.SilkS)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_text value 8Mhz (at 2.44 -3.525) (layer B.Fab)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_arc (start 5.64 0) (end 5.64 2.525) (angle -180) (layer B.SilkS) (width 0.12))
    (fp_arc (start -0.76 0) (end -0.76 2.525) (angle 180) (layer B.SilkS) (width 0.12))
    (fp_arc (start 5.44 0) (end 5.44 2) (angle -180) (layer B.Fab) (width 0.1))
    (fp_arc (start -0.56 0) (end -0.56 2) (angle 180) (layer B.Fab) (width 0.1))
    (fp_arc (start 5.64 0) (end 5.64 2.325) (angle -180) (layer B.Fab) (width 0.1))
    (fp_arc (start -0.76 0) (end -0.76 2.325) (angle 180) (layer B.Fab) (width 0.1))
    (fp_text user %R (at 2.44 0) (layer B.Fab)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_line (start -0.76 2.325) (end 5.64 2.325) (layer B.Fab) (width 0.1))
    (fp_line (start -0.76 -2.325) (end 5.64 -2.325) (layer B.Fab) (width 0.1))
    (fp_line (start -0.56 2) (end 5.44 2) (layer B.Fab) (width 0.1))
    (fp_line (start -0.56 -2) (end 5.44 -2) (layer B.Fab) (width 0.1))
    (fp_line (start -0.76 2.525) (end 5.64 2.525) (layer B.SilkS) (width 0.12))
    (fp_line (start -0.76 -2.525) (end 5.64 -2.525) (layer B.SilkS) (width 0.12))
    (fp_line (start -3.6 2.8) (end -3.6 -2.8) (layer B.CrtYd) (width 0.05))
    (fp_line (start -3.6 -2.8) (end 8.5 -2.8) (layer B.CrtYd) (width 0.05))
    (fp_line (start 8.5 -2.8) (end 8.5 2.8) (layer B.CrtYd) (width 0.05))
    (fp_line (start 8.5 2.8) (end -3.6 2.8) (layer B.CrtYd) (width 0.05))
    (pad 2 thru_hole circle (at 4.88 0) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 11 "Net-(C4-Pad2)"))
    (pad 1 thru_hole circle (at 0 0) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
      (net 12 "Net-(C5-Pad2)"))
    (model ${KISYS3DMOD}/Crystal.3dshapes/Crystal_HC49-4H_Vertical.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Relay_THT:Relay_SPDT_Finder_36.11 (layer F.Cu) (tedit 5D3F5A07) (tstamp 6111615C)
    (at -11.9 -50 180)
    (descr "FINDER 36.11, SPDT relay, 10A, https://gfinder.findernet.com/public/attachments/36/EN/S36EN.pdf")
    (tags "spdt relay")
    (path /61016D14)
    (fp_text reference U2 (at 8.1 9.2) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value relay (at 8 -9.6) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 7.1 0.025) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -1.5 1.2) (end -1.5 7.7) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.5 -7.7) (end -1.5 -1.2) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.5 -7.7) (end 17.7 -7.7) (layer F.SilkS) (width 0.12))
    (fp_line (start 17.7 -7.7) (end 17.7 7.7) (layer F.SilkS) (width 0.12))
    (fp_line (start 17.7 7.7) (end -1.5 7.7) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.4 -7.6) (end 17.6 -7.6) (layer F.Fab) (width 0.1))
    (fp_line (start 17.6 -7.6) (end 17.6 7.6) (layer F.Fab) (width 0.1))
    (fp_line (start 17.6 7.6) (end -1.4 7.6) (layer F.Fab) (width 0.1))
    (fp_line (start -1.4 7.6) (end -1.4 -7.6) (layer F.Fab) (width 0.1))
    (fp_line (start 17.85 -7.85) (end -1.75 -7.85) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.75 7.85) (end -1.75 -7.85) (layer F.CrtYd) (width 0.05))
    (fp_line (start 17.85 -7.85) (end 17.85 7.85) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.75 7.85) (end 17.85 7.85) (layer F.CrtYd) (width 0.05))
    (fp_line (start 14.2 4.3) (end 14.2 2) (layer F.SilkS) (width 0.12))
    (fp_line (start 14.2 -4.3) (end 14.2 -2) (layer F.SilkS) (width 0.12))
    (fp_line (start 3.7 6) (end 6 6) (layer F.SilkS) (width 0.12))
    (fp_line (start 2.6 0) (end 1.7 0) (layer F.SilkS) (width 0.12))
    (fp_line (start 6 -6) (end 3.7 -6) (layer F.SilkS) (width 0.12))
    (fp_line (start 9.5 0) (end 11 0) (layer F.SilkS) (width 0.12))
    (fp_line (start 11 0) (end 15.5 -2.7) (layer F.SilkS) (width 0.12))
    (fp_line (start 9.5 3.7) (end 2.6 3.7) (layer F.SilkS) (width 0.12))
    (fp_line (start 9.5 0) (end 9.5 3.7) (layer F.SilkS) (width 0.12))
    (fp_line (start 2.6 0) (end 2.6 3.7) (layer F.SilkS) (width 0.12))
    (fp_line (start 6 -6) (end 6 -1.5) (layer F.SilkS) (width 0.12))
    (fp_line (start 6 1.5) (end 6 6) (layer F.SilkS) (width 0.12))
    (fp_line (start 8.5 1.5) (end 3.5 -1.5) (layer F.SilkS) (width 0.12))
    (fp_line (start 3.5 1.5) (end 3.5 -1.5) (layer F.SilkS) (width 0.12))
    (fp_line (start 3.5 -1.5) (end 8.5 -1.5) (layer F.SilkS) (width 0.12))
    (fp_line (start 8.5 -1.5) (end 8.5 1.5) (layer F.SilkS) (width 0.12))
    (fp_line (start 8.5 1.5) (end 3.5 1.5) (layer F.SilkS) (width 0.12))
    (pad 11 thru_hole circle (at 0 0 180) (size 3 3) (drill 1.3) (layers *.Cu *.Mask)
      (net 5 LOAD_A))
    (pad A2 thru_hole circle (at 2 -6 180) (size 3 3) (drill 1.3) (layers *.Cu *.Mask)
      (net 13 VCC))
    (pad 12 thru_hole circle (at 14.2 -6 180) (size 3 3) (drill 1.3) (layers *.Cu *.Mask))
    (pad 14 thru_hole circle (at 14.2 6 180) (size 3 3) (drill 1.3) (layers *.Cu *.Mask)
      (net 4 LOAD_B))
    (pad A1 thru_hole circle (at 2 6 180) (size 3 3) (drill 1.3) (layers *.Cu *.Mask)
      (net 2 "Net-(D1-Pad2)"))
    (model ${KISYS3DMOD}/Relay_THT.3dshapes/Relay_SPDT_Finder_36.11.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module parts:DC-DC (layer F.Cu) (tedit 61006BF1) (tstamp 61013024)
    (at -15 -27.25)
    (path /610AC5CA)
    (fp_text reference U3 (at 0 1.5) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value DC-DC (at 0 -1.5) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -11.9 -7.2) (end 11.9 -7.2) (layer F.SilkS) (width 0.12))
    (fp_line (start -11.9 7.2) (end -11.9 -7.2) (layer F.SilkS) (width 0.12))
    (fp_line (start 11.9 7.2) (end -11.9 7.2) (layer F.SilkS) (width 0.12))
    (fp_line (start 11.9 -7.2) (end 11.9 7.2) (layer F.SilkS) (width 0.12))
    (pad 2 thru_hole circle (at -10.3 6) (size 2.4 2.4) (drill 1) (layers *.Cu *.Mask)
      (net 18 /IN+))
    (pad 2 thru_hole circle (at -10.3 3.7) (size 2.4 2.4) (drill 1) (layers *.Cu *.Mask)
      (net 18 /IN+))
    (pad 1 thru_hole circle (at -10.3 -3.7) (size 2.4 2.4) (drill 1) (layers *.Cu *.Mask)
      (net 19 /IN-))
    (pad 1 thru_hole circle (at -10.3 -6) (size 2.4 2.4) (drill 1) (layers *.Cu *.Mask)
      (net 19 /IN-))
    (pad 3 thru_hole circle (at 10.2 6) (size 2.4 2.4) (drill 1) (layers *.Cu *.Mask)
      (net 13 VCC))
    (pad 3 thru_hole circle (at 10.2 3.7) (size 2.4 2.4) (drill 1) (layers *.Cu *.Mask)
      (net 13 VCC))
    (pad 4 thru_hole circle (at 10.2 -3.7) (size 2.4 2.4) (drill 1) (layers *.Cu *.Mask)
      (net 1 GND))
    (pad 4 thru_hole circle (at 10.2 -6) (size 2.4 2.4) (drill 1) (layers *.Cu *.Mask)
      (net 1 GND))
  )

  (module Connector_PinHeader_1.27mm:PinHeader_1x05_P1.27mm_Vertical (layer F.Cu) (tedit 6101CA59) (tstamp 61019E6B)
    (at -6.3 -47.3)
    (descr "Through hole straight pin header, 1x05, 1.27mm pitch, single row")
    (tags "Through hole pin header THT 1x05 1.27mm single row")
    (path /61209F29)
    (fp_text reference J4 (at 0 -1.695) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value PRG (at 0 6.775) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.55 -1.15) (end -1.55 -1.15) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.55 6.25) (end 1.55 -1.15) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.55 6.25) (end 1.55 6.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.55 -1.15) (end -1.55 6.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.11 -0.76) (end 0 -0.76) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.11 0) (end -1.11 -0.76) (layer F.SilkS) (width 0.12))
    (fp_line (start 0.563471 0.76) (end 1.11 0.76) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.11 0.76) (end -0.563471 0.76) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.11 0.76) (end 1.11 5.775) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.11 0.76) (end -1.11 5.775) (layer F.SilkS) (width 0.12))
    (fp_line (start 0.30753 5.775) (end 1.11 5.775) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.11 5.775) (end -0.30753 5.775) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.05 -0.11) (end -0.525 -0.635) (layer F.Fab) (width 0.1))
    (fp_line (start -1.05 5.715) (end -1.05 -0.11) (layer F.Fab) (width 0.1))
    (fp_line (start 1.05 5.715) (end -1.05 5.715) (layer F.Fab) (width 0.1))
    (fp_line (start 1.05 -0.635) (end 1.05 5.715) (layer F.Fab) (width 0.1))
    (fp_line (start -0.525 -0.635) (end 1.05 -0.635) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 2.54 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 5 thru_hole oval (at 0 5.08) (size 2.4 1) (drill 0.65) (layers *.Cu *.Mask)
      (net 17 PRG_RX))
    (pad 4 thru_hole oval (at 0 3.81) (size 2.4 1) (drill 0.65) (layers *.Cu *.Mask)
      (net 16 PRG_TX))
    (pad 3 thru_hole oval (at 0 2.54) (size 2.4 1) (drill 0.65) (layers *.Cu *.Mask)
      (net 14 PRG_DTR))
    (pad 2 thru_hole oval (at 0 1.27) (size 2.4 1) (drill 0.65) (layers *.Cu *.Mask)
      (net 13 VCC))
    (pad 1 thru_hole rect (at 0 0) (size 2.4 1) (drill 0.65) (layers *.Cu *.Mask)
      (net 1 GND))
    (model ${KISYS3DMOD}/Connector_PinHeader_1.27mm.3dshapes/PinHeader_1x05_P1.27mm_Vertical.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146C) (tstamp 61012EA4)
    (at -4.5 -56.8 270)
    (descr "JST XH series connector, B3B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator")
    (tags "connector JST XH vertical")
    (path /61043486)
    (fp_text reference J1 (at 2.5 -3.55 90) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value Conn_01x03 (at 2.5 4.6 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12))
    (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12))
    (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12))
    (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.8 -0.2) (end -1.8 2.75) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12))
    (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12))
    (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12))
    (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12))
    (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12))
    (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12))
    (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12))
    (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12))
    (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12))
    (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1))
    (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1))
    (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05))
    (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05))
    (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12))
    (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12))
    (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1))
    (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1))
    (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1))
    (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 2.5 2.7 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 3 thru_hole oval (at 5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask)
      (net 13 VCC))
    (pad 2 thru_hole oval (at 2.5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask)
      (net 3 TEMP_SENSE))
    (pad 1 thru_hole roundrect (at 0 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.1470588235294118)
      (net 1 GND))
    (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal (layer F.Cu) (tedit 5B294F69) (tstamp 6103261F)
    (at -22.5 -65.5)
    (descr "Terminal Block Phoenix PT-1,5-2-5.0-H, 2 pins, pitch 5mm, size 10x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix")
    (tags "THT Terminal Block Phoenix PT-1,5-2-5.0-H pitch 5mm size 10x9mm^2 drill 1.3mm pad 2.6mm")
    (path /610B5C42)
    (fp_text reference J3 (at 2.25 -2.75) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value PWR (at 2.5 6.06) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 8 -4.5) (end -3 -4.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start 8 5.5) (end 8 -4.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3 5.5) (end 8 5.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3 -4.5) (end -3 5.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2.8 5.3) (end -2.4 5.3) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.8 4.66) (end -2.8 5.3) (layer F.SilkS) (width 0.12))
    (fp_line (start 3.742 0.992) (end 3.347 1.388) (layer F.SilkS) (width 0.12))
    (fp_line (start 6.388 -1.654) (end 6.008 -1.274) (layer F.SilkS) (width 0.12))
    (fp_line (start 3.993 1.274) (end 3.613 1.654) (layer F.SilkS) (width 0.12))
    (fp_line (start 6.654 -1.388) (end 6.259 -0.992) (layer F.SilkS) (width 0.12))
    (fp_line (start 6.273 -1.517) (end 3.484 1.273) (layer F.Fab) (width 0.1))
    (fp_line (start 6.517 -1.273) (end 3.728 1.517) (layer F.Fab) (width 0.1))
    (fp_line (start -1.548 1.281) (end -1.654 1.388) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.388 -1.654) (end 1.281 -1.547) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.282 1.547) (end -1.388 1.654) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.654 -1.388) (end 1.547 -1.281) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.273 -1.517) (end -1.517 1.273) (layer F.Fab) (width 0.1))
    (fp_line (start 1.517 -1.273) (end -1.273 1.517) (layer F.Fab) (width 0.1))
    (fp_line (start 7.56 -4.06) (end 7.56 5.06) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.56 -4.06) (end -2.56 5.06) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.56 5.06) (end 7.56 5.06) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.56 -4.06) (end 7.56 -4.06) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.56 3.5) (end 7.56 3.5) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.5 3.5) (end 7.5 3.5) (layer F.Fab) (width 0.1))
    (fp_line (start -2.56 4.6) (end 7.56 4.6) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.5 4.6) (end 7.5 4.6) (layer F.Fab) (width 0.1))
    (fp_line (start -2.5 4.6) (end -2.5 -4) (layer F.Fab) (width 0.1))
    (fp_line (start -2.1 5) (end -2.5 4.6) (layer F.Fab) (width 0.1))
    (fp_line (start 7.5 5) (end -2.1 5) (layer F.Fab) (width 0.1))
    (fp_line (start 7.5 -4) (end 7.5 5) (layer F.Fab) (width 0.1))
    (fp_line (start -2.5 -4) (end 7.5 -4) (layer F.Fab) (width 0.1))
    (fp_circle (center 5 0) (end 7.18 0) (layer F.SilkS) (width 0.12))
    (fp_circle (center 5 0) (end 7 0) (layer F.Fab) (width 0.1))
    (fp_circle (center 0 0) (end 2.18 0) (layer F.SilkS) (width 0.12))
    (fp_circle (center 0 0) (end 2 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 2.5 2.9) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 2 thru_hole circle (at 5 0) (size 2.6 2.6) (drill 1.3) (layers *.Cu *.Mask)
      (net 19 /IN-))
    (pad 1 thru_hole rect (at 0 0) (size 2.6 2.6) (drill 1.3) (layers *.Cu *.Mask)
      (net 18 /IN+))
    (model ${KISYS3DMOD}/TerminalBlock_Phoenix.3dshapes/TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 61012F3E)
    (at -12.75 -35 180)
    (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /6100E731)
    (attr smd)
    (fp_text reference R1 (at 0 1.82 180) (layer B.SilkS)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_text value 4.7k (at 0 -1.82 180) (layer B.Fab)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_text user %R (at 0 0 180) (layer B.Fab)
      (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))
    )
    (pad 2 smd roundrect (at 1.55 0 180) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 13 VCC))
    (pad 1 smd roundrect (at -1.55 0 180) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 6 OLED_SDA))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal (layer F.Cu) (tedit 5B294F69) (tstamp 6101801F)
    (at -12.5 -65.5)
    (descr "Terminal Block Phoenix PT-1,5-2-5.0-H, 2 pins, pitch 5mm, size 10x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix")
    (tags "THT Terminal Block Phoenix PT-1,5-2-5.0-H pitch 5mm size 10x9mm^2 drill 1.3mm pad 2.6mm")
    (path /6103B252)
    (fp_text reference J2 (at 2.5 -2.75) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value LOAD (at 2.5 6.06) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 8 -4.5) (end -3 -4.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start 8 5.5) (end 8 -4.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3 5.5) (end 8 5.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start -3 -4.5) (end -3 5.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2.8 5.3) (end -2.4 5.3) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.8 4.66) (end -2.8 5.3) (layer F.SilkS) (width 0.12))
    (fp_line (start 3.742 0.992) (end 3.347 1.388) (layer F.SilkS) (width 0.12))
    (fp_line (start 6.388 -1.654) (end 6.008 -1.274) (layer F.SilkS) (width 0.12))
    (fp_line (start 3.993 1.274) (end 3.613 1.654) (layer F.SilkS) (width 0.12))
    (fp_line (start 6.654 -1.388) (end 6.259 -0.992) (layer F.SilkS) (width 0.12))
    (fp_line (start 6.273 -1.517) (end 3.484 1.273) (layer F.Fab) (width 0.1))
    (fp_line (start 6.517 -1.273) (end 3.728 1.517) (layer F.Fab) (width 0.1))
    (fp_line (start -1.548 1.281) (end -1.654 1.388) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.388 -1.654) (end 1.281 -1.547) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.282 1.547) (end -1.388 1.654) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.654 -1.388) (end 1.547 -1.281) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.273 -1.517) (end -1.517 1.273) (layer F.Fab) (width 0.1))
    (fp_line (start 1.517 -1.273) (end -1.273 1.517) (layer F.Fab) (width 0.1))
    (fp_line (start 7.56 -4.06) (end 7.56 5.06) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.56 -4.06) (end -2.56 5.06) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.56 5.06) (end 7.56 5.06) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.56 -4.06) (end 7.56 -4.06) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.56 3.5) (end 7.56 3.5) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.5 3.5) (end 7.5 3.5) (layer F.Fab) (width 0.1))
    (fp_line (start -2.56 4.6) (end 7.56 4.6) (layer F.SilkS) (width 0.12))
    (fp_line (start -2.5 4.6) (end 7.5 4.6) (layer F.Fab) (width 0.1))
    (fp_line (start -2.5 4.6) (end -2.5 -4) (layer F.Fab) (width 0.1))
    (fp_line (start -2.1 5) (end -2.5 4.6) (layer F.Fab) (width 0.1))
    (fp_line (start 7.5 5) (end -2.1 5) (layer F.Fab) (width 0.1))
    (fp_line (start 7.5 -4) (end 7.5 5) (layer F.Fab) (width 0.1))
    (fp_line (start -2.5 -4) (end 7.5 -4) (layer F.Fab) (width 0.1))
    (fp_circle (center 5 0) (end 7.18 0) (layer F.SilkS) (width 0.12))
    (fp_circle (center 5 0) (end 7 0) (layer F.Fab) (width 0.1))
    (fp_circle (center 0 0) (end 2.18 0) (layer F.SilkS) (width 0.12))
    (fp_circle (center 0 0) (end 2 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 2.5 2.9) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 2 thru_hole circle (at 5 0) (size 2.6 2.6) (drill 1.3) (layers *.Cu *.Mask)
      (net 5 LOAD_A))
    (pad 1 thru_hole rect (at 0 0) (size 2.6 2.6) (drill 1.3) (layers *.Cu *.Mask)
      (net 4 LOAD_B))
    (model ${KISYS3DMOD}/TerminalBlock_Phoenix.3dshapes/TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Package_QFP:TQFP-32_7x7mm_P0.8mm (layer B.Cu) (tedit 5A02F146) (tstamp 6101B9D3)
    (at -16.5 -27.05 90)
    (descr "32-Lead Plastic Thin Quad Flatpack (PT) - 7x7x1.0 mm Body, 2.00 mm [TQFP] (see Microchip Packaging Specification 00000049BS.pdf)")
    (tags "QFP 0.8")
    (path /61176B03)
    (attr smd)
    (fp_text reference U1 (at 0 6.05 90) (layer B.SilkS)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_text value ATmega328P-AU-complete (at 0 -6.05 90) (layer B.Fab)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_line (start -3.625 3.4) (end -5.05 3.4) (layer B.SilkS) (width 0.15))
    (fp_line (start 3.625 3.625) (end 3.3 3.625) (layer B.SilkS) (width 0.15))
    (fp_line (start 3.625 -3.625) (end 3.3 -3.625) (layer B.SilkS) (width 0.15))
    (fp_line (start -3.625 -3.625) (end -3.3 -3.625) (layer B.SilkS) (width 0.15))
    (fp_line (start -3.625 3.625) (end -3.3 3.625) (layer B.SilkS) (width 0.15))
    (fp_line (start -3.625 -3.625) (end -3.625 -3.3) (layer B.SilkS) (width 0.15))
    (fp_line (start 3.625 -3.625) (end 3.625 -3.3) (layer B.SilkS) (width 0.15))
    (fp_line (start 3.625 3.625) (end 3.625 3.3) (layer B.SilkS) (width 0.15))
    (fp_line (start -3.625 3.625) (end -3.625 3.4) (layer B.SilkS) (width 0.15))
    (fp_line (start -5.3 -5.3) (end 5.3 -5.3) (layer B.CrtYd) (width 0.05))
    (fp_line (start -5.3 5.3) (end 5.3 5.3) (layer B.CrtYd) (width 0.05))
    (fp_line (start 5.3 5.3) (end 5.3 -5.3) (layer B.CrtYd) (width 0.05))
    (fp_line (start -5.3 5.3) (end -5.3 -5.3) (layer B.CrtYd) (width 0.05))
    (fp_line (start -3.5 2.5) (end -2.5 3.5) (layer B.Fab) (width 0.15))
    (fp_line (start -3.5 -3.5) (end -3.5 2.5) (layer B.Fab) (width 0.15))
    (fp_line (start 3.5 -3.5) (end -3.5 -3.5) (layer B.Fab) (width 0.15))
    (fp_line (start 3.5 3.5) (end 3.5 -3.5) (layer B.Fab) (width 0.15))
    (fp_line (start -2.5 3.5) (end 3.5 3.5) (layer B.Fab) (width 0.15))
    (fp_text user %R (at 26 -19 90) (layer B.Fab)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (pad 32 smd rect (at -2.8 4.25) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask))
    (pad 31 smd rect (at -2 4.25) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask)
      (net 16 PRG_TX))
    (pad 30 smd rect (at -1.2 4.25) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask)
      (net 17 PRG_RX))
    (pad 29 smd rect (at -0.4 4.25) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask)
      (net 15 RST))
    (pad 28 smd rect (at 0.4 4.25) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask)
      (net 7 OLED_SCL))
    (pad 27 smd rect (at 1.2 4.25) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask)
      (net 6 OLED_SDA))
    (pad 26 smd rect (at 2 4.25) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask))
    (pad 25 smd rect (at 2.8 4.25) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask))
    (pad 24 smd rect (at 4.25 2.8 90) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask))
    (pad 23 smd rect (at 4.25 2 90) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask))
    (pad 22 smd rect (at 4.25 1.2 90) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask))
    (pad 21 smd rect (at 4.25 0.4 90) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask)
      (net 1 GND))
    (pad 20 smd rect (at 4.25 -0.4 90) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask))
    (pad 19 smd rect (at 4.25 -1.2 90) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask))
    (pad 18 smd rect (at 4.25 -2 90) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask)
      (net 13 VCC))
    (pad 17 smd rect (at 4.25 -2.8 90) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask))
    (pad 16 smd rect (at 2.8 -4.25) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask)
      (net 3 TEMP_SENSE))
    (pad 15 smd rect (at 2 -4.25) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask)
      (net 8 REL_SW))
    (pad 14 smd rect (at 1.2 -4.25) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask))
    (pad 13 smd rect (at 0.4 -4.25) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask))
    (pad 12 smd rect (at -0.4 -4.25) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask))
    (pad 11 smd rect (at -1.2 -4.25) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask))
    (pad 10 smd rect (at -2 -4.25) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask)
      (net 9 DOWN_SET))
    (pad 9 smd rect (at -2.8 -4.25) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask)
      (net 10 UP_SET))
    (pad 8 smd rect (at -4.25 -2.8 90) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask)
      (net 12 "Net-(C5-Pad2)"))
    (pad 7 smd rect (at -4.25 -2 90) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask)
      (net 11 "Net-(C4-Pad2)"))
    (pad 6 smd rect (at -4.25 -1.2 90) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask)
      (net 13 VCC))
    (pad 5 smd rect (at -4.25 -0.4 90) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask)
      (net 1 GND))
    (pad 4 smd rect (at -4.25 0.4 90) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask)
      (net 13 VCC))
    (pad 3 smd rect (at -4.25 1.2 90) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask)
      (net 1 GND))
    (pad 2 smd rect (at -4.25 2 90) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask))
    (pad 1 smd rect (at -4.25 2.8 90) (size 1.6 0.55) (layers B.Cu B.Paste B.Mask))
    (model ${KISYS3DMOD}/Package_QFP.3dshapes/TQFP-32_7x7mm_P0.8mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 61024179)
    (at -7.5 -36.5 270)
    (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /61198DE6)
    (attr smd)
    (fp_text reference R7 (at 0 1.82 90) (layer B.SilkS)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_text value 10k (at 0 -1.82 90) (layer B.Fab)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_text user %R (at 0 0 90) (layer B.Fab)
      (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))
    )
    (pad 2 smd roundrect (at 1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 15 RST))
    (pad 1 smd roundrect (at -1.55 0 270) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 13 VCC))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 61019CF1)
    (at -4.8 -28.1)
    (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /611C0331)
    (attr smd)
    (fp_text reference Crst1 (at 0 1.82) (layer B.SilkS)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_text value 0.1uF (at 0 -1.82) (layer B.Fab)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer B.Fab)
      (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))
    )
    (pad 2 smd roundrect (at 1.55 0) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 14 PRG_DTR))
    (pad 1 smd roundrect (at -1.55 0) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 15 RST))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 61019CE0)
    (at -17.5 -43.75 90)
    (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /611CA676)
    (attr smd)
    (fp_text reference Cp1 (at 0 1.82 180) (layer B.SilkS)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_text value 0.1uF (at 0 -1.82 270) (layer B.Fab)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_text user %R (at 0 0 270) (layer B.Fab)
      (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))
    )
    (pad 2 smd roundrect (at 1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 13 VCC))
    (pad 1 smd roundrect (at -1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 1 GND))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 610265E6)
    (at -14.6 -9.7 90)
    (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /6118B6A2)
    (attr smd)
    (fp_text reference C5 (at 0 1.82 90) (layer B.SilkS)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_text value 12-22pf (at 0 -1.82 90) (layer B.Fab)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_text user %R (at 0 0 90) (layer B.Fab)
      (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))
    )
    (pad 2 smd roundrect (at 1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 12 "Net-(C5-Pad2)"))
    (pad 1 smd roundrect (at -1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 1 GND))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 6101D02A)
    (at -7.85 -18.45 180)
    (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /6118A635)
    (attr smd)
    (fp_text reference C4 (at 0 1.82) (layer B.SilkS)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_text value 12-22pf (at 0 -1.82) (layer B.Fab)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer B.Fab)
      (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))
    )
    (pad 2 smd roundrect (at 1.55 0 180) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 11 "Net-(C4-Pad2)"))
    (pad 1 smd roundrect (at -1.55 0 180) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 1 GND))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module MountingHole:MountingHole_2.1mm (layer F.Cu) (tedit 5B924765) (tstamp 610189AE)
    (at -2.2 -2.1)
    (descr "Mounting Hole 2.1mm, no annular")
    (tags "mounting hole 2.1mm no annular")
    (path /610D67AD)
    (attr virtual)
    (fp_text reference H4 (at 0 -3.2) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole (at 0 3.2) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 2.35 0) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 2.1 0) (layer Cmts.User) (width 0.15))
    (fp_text user %R (at 0.3 0) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad "" np_thru_hole circle (at 0 0) (size 2.1 2.1) (drill 2.1) (layers *.Cu *.Mask))
  )

  (module MountingHole:MountingHole_2.1mm (layer F.Cu) (tedit 5B924765) (tstamp 610185C6)
    (at -27.8 -2.1)
    (descr "Mounting Hole 2.1mm, no annular")
    (tags "mounting hole 2.1mm no annular")
    (path /610D618D)
    (attr virtual)
    (fp_text reference H3 (at 0 -3.2) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole (at 0 3.2) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 2.35 0) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 2.1 0) (layer Cmts.User) (width 0.15))
    (fp_text user %R (at 0.3 0) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad "" np_thru_hole circle (at 0 0) (size 2.1 2.1) (drill 2.1) (layers *.Cu *.Mask))
  )

  (module MountingHole:MountingHole_2.1mm (layer F.Cu) (tedit 5B924765) (tstamp 610185BE)
    (at -2.2 -67.9)
    (descr "Mounting Hole 2.1mm, no annular")
    (tags "mounting hole 2.1mm no annular")
    (path /610D5B67)
    (attr virtual)
    (fp_text reference H2 (at 0 -3.2) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole (at 0 3.2) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 2.35 0) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 2.1 0) (layer Cmts.User) (width 0.15))
    (fp_text user %R (at 0.3 0) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad "" np_thru_hole circle (at 0 0) (size 2.1 2.1) (drill 2.1) (layers *.Cu *.Mask))
  )

  (module MountingHole:MountingHole_2.1mm (layer F.Cu) (tedit 5B924765) (tstamp 610185B6)
    (at -27.8 -67.9)
    (descr "Mounting Hole 2.1mm, no annular")
    (tags "mounting hole 2.1mm no annular")
    (path /610D108E)
    (attr virtual)
    (fp_text reference H1 (at 0 -3.2) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole (at 0 3.2) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 2.35 0) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 2.1 0) (layer Cmts.User) (width 0.15))
    (fp_text user %R (at 0.3 0) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad "" np_thru_hole circle (at 0 0) (size 2.1 2.1) (drill 2.1) (layers *.Cu *.Mask))
  )

  (module Button_Switch_THT:SW_PUSH_6mm_H8mm (layer F.Cu) (tedit 5A02FE31) (tstamp 61017B46)
    (at -10.4 -10.8)
    (descr "tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm")
    (tags "tact sw push 6mm")
    (path /610564AD)
    (fp_text reference SW2 (at 3.25 -2) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value DOWN_SET (at 3.75 6.7) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 3.25 2.25) (end 1.25 2.5) (layer F.Fab) (width 0.1))
    (fp_line (start 6.75 3) (end 6.75 1.5) (layer F.SilkS) (width 0.12))
    (fp_line (start 5.5 -1) (end 1 -1) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.25 1.5) (end -0.25 3) (layer F.SilkS) (width 0.12))
    (fp_line (start 1 5.5) (end 5.5 5.5) (layer F.SilkS) (width 0.12))
    (fp_line (start 8 -1.25) (end 8 5.75) (layer F.CrtYd) (width 0.05))
    (fp_line (start 7.75 6) (end -1.25 6) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.5 5.75) (end -1.5 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.25 -1.5) (end 7.75 -1.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.5 6) (end -1.25 6) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.5 5.75) (end -1.5 6) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.5 -1.5) (end -1.25 -1.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.5 -1.25) (end -1.5 -1.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start 8 -1.5) (end 8 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 7.75 -1.5) (end 8 -1.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start 8 6) (end 8 5.75) (layer F.CrtYd) (width 0.05))
    (fp_line (start 7.75 6) (end 8 6) (layer F.CrtYd) (width 0.05))
    (fp_line (start 0.25 -0.75) (end 3.25 -0.75) (layer F.Fab) (width 0.1))
    (fp_line (start 0.25 5.25) (end 0.25 -0.75) (layer F.Fab) (width 0.1))
    (fp_line (start 6.25 5.25) (end 0.25 5.25) (layer F.Fab) (width 0.1))
    (fp_line (start 6.25 -0.75) (end 6.25 5.25) (layer F.Fab) (width 0.1))
    (fp_line (start 3.25 -0.75) (end 6.25 -0.75) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 3.25 2.25) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 thru_hole circle (at 6.5 0 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask)
      (net 10 UP_SET))
    (pad 2 thru_hole circle (at 6.5 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask)
      (net 13 VCC))
    (pad 1 thru_hole circle (at 0 0 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask)
      (net 10 UP_SET))
    (pad 2 thru_hole circle (at 0 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask)
      (net 13 VCC))
    (model ${KISYS3DMOD}/Button_Switch_THT.3dshapes/SW_PUSH_6mm_H8mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Button_Switch_THT:SW_PUSH_6mm_H8mm (layer F.Cu) (tedit 5A02FE31) (tstamp 61017BA0)
    (at -25.6 -10.8)
    (descr "tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm")
    (tags "tact sw push 6mm")
    (path /61055271)
    (fp_text reference SW1 (at 3.25 -2) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value UP_SET (at 3.75 6.7) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 3.25 2.25) (end 1.25 2.5) (layer F.Fab) (width 0.1))
    (fp_line (start 6.75 3) (end 6.75 1.5) (layer F.SilkS) (width 0.12))
    (fp_line (start 5.5 -1) (end 1 -1) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.25 1.5) (end -0.25 3) (layer F.SilkS) (width 0.12))
    (fp_line (start 1 5.5) (end 5.5 5.5) (layer F.SilkS) (width 0.12))
    (fp_line (start 8 -1.25) (end 8 5.75) (layer F.CrtYd) (width 0.05))
    (fp_line (start 7.75 6) (end -1.25 6) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.5 5.75) (end -1.5 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.25 -1.5) (end 7.75 -1.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.5 6) (end -1.25 6) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.5 5.75) (end -1.5 6) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.5 -1.5) (end -1.25 -1.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.5 -1.25) (end -1.5 -1.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start 8 -1.5) (end 8 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 7.75 -1.5) (end 8 -1.5) (layer F.CrtYd) (width 0.05))
    (fp_line (start 8 6) (end 8 5.75) (layer F.CrtYd) (width 0.05))
    (fp_line (start 7.75 6) (end 8 6) (layer F.CrtYd) (width 0.05))
    (fp_line (start 0.25 -0.75) (end 3.25 -0.75) (layer F.Fab) (width 0.1))
    (fp_line (start 0.25 5.25) (end 0.25 -0.75) (layer F.Fab) (width 0.1))
    (fp_line (start 6.25 5.25) (end 0.25 5.25) (layer F.Fab) (width 0.1))
    (fp_line (start 6.25 -0.75) (end 6.25 5.25) (layer F.Fab) (width 0.1))
    (fp_line (start 3.25 -0.75) (end 6.25 -0.75) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 3.25 2.25) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 thru_hole circle (at 6.5 0 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask)
      (net 9 DOWN_SET))
    (pad 2 thru_hole circle (at 6.5 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask)
      (net 13 VCC))
    (pad 1 thru_hole circle (at 0 0 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask)
      (net 9 DOWN_SET))
    (pad 2 thru_hole circle (at 0 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask)
      (net 13 VCC))
    (model ${KISYS3DMOD}/Button_Switch_THT.3dshapes/SW_PUSH_6mm_H8mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 61012F93)
    (at -6.65 -2.8)
    (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /61069915)
    (attr smd)
    (fp_text reference R6 (at 0 1.82) (layer B.SilkS)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_text value 10k (at 0 -1.82) (layer B.Fab)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer B.Fab)
      (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))
    )
    (pad 2 smd roundrect (at 1.55 0) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 1 GND))
    (pad 1 smd roundrect (at -1.55 0) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 10 UP_SET))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 61012F82)
    (at -23.2 -2.6 180)
    (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /61069439)
    (attr smd)
    (fp_text reference R5 (at 0 1.82) (layer B.SilkS)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_text value 10k (at 0 -1.82) (layer B.Fab)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer B.Fab)
      (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))
    )
    (pad 2 smd roundrect (at 1.55 0 180) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 1 GND))
    (pad 1 smd roundrect (at -1.55 0 180) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 9 DOWN_SET))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 61012F71)
    (at -24.8 -47.4 180)
    (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /6101FDE5)
    (attr smd)
    (fp_text reference R4 (at 0 1.82) (layer B.SilkS)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_text value 10k (at 0 -1.82) (layer B.Fab)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer B.Fab)
      (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))
    )
    (pad 2 smd roundrect (at 1.55 0 180) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 1 GND))
    (pad 1 smd roundrect (at -1.55 0 180) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 8 REL_SW))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 61012F60)
    (at -11.1 -42.65 90)
    (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /6100FB66)
    (attr smd)
    (fp_text reference R3 (at 0 1.82 270) (layer B.SilkS)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_text value 4.7k (at 0 -1.82 270) (layer B.Fab)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_text user %R (at 0 0 270) (layer B.Fab)
      (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))
    )
    (pad 2 smd roundrect (at 1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 13 VCC))
    (pad 1 smd roundrect (at -1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 7 OLED_SCL))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 61023E7D)
    (at -2.4 -47.15 90)
    (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /6104A46A)
    (attr smd)
    (fp_text reference R2 (at 0 1.82 90) (layer B.SilkS)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_text value 4.7k (at 0 -1.82 90) (layer B.Fab)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_text user %R (at 0 0 90) (layer B.Fab)
      (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))
    )
    (pad 2 smd roundrect (at 1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 3 TEMP_SENSE))
    (pad 1 smd roundrect (at -1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 13 VCC))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Package_TO_SOT_SMD:SOT-23 (layer B.Cu) (tedit 5A02FF57) (tstamp 61012F2D)
    (at -22.4 -52.15)
    (descr "SOT-23, Standard")
    (tags SOT-23)
    (path /61018CC5)
    (attr smd)
    (fp_text reference Q1 (at 0 2.5) (layer B.SilkS)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_text value AO3400A (at 0 -2.5) (layer B.Fab)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_line (start 0.76 -1.58) (end -0.7 -1.58) (layer B.SilkS) (width 0.12))
    (fp_line (start 0.76 1.58) (end -1.4 1.58) (layer B.SilkS) (width 0.12))
    (fp_line (start -1.7 -1.75) (end -1.7 1.75) (layer B.CrtYd) (width 0.05))
    (fp_line (start 1.7 -1.75) (end -1.7 -1.75) (layer B.CrtYd) (width 0.05))
    (fp_line (start 1.7 1.75) (end 1.7 -1.75) (layer B.CrtYd) (width 0.05))
    (fp_line (start -1.7 1.75) (end 1.7 1.75) (layer B.CrtYd) (width 0.05))
    (fp_line (start 0.76 1.58) (end 0.76 0.65) (layer B.SilkS) (width 0.12))
    (fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer B.SilkS) (width 0.12))
    (fp_line (start -0.7 -1.52) (end 0.7 -1.52) (layer B.Fab) (width 0.1))
    (fp_line (start 0.7 1.52) (end 0.7 -1.52) (layer B.Fab) (width 0.1))
    (fp_line (start -0.7 0.95) (end -0.15 1.52) (layer B.Fab) (width 0.1))
    (fp_line (start -0.15 1.52) (end 0.7 1.52) (layer B.Fab) (width 0.1))
    (fp_line (start -0.7 0.95) (end -0.7 -1.5) (layer B.Fab) (width 0.1))
    (fp_text user %R (at 0 0 270) (layer B.Fab)
      (effects (font (size 0.5 0.5) (thickness 0.075)) (justify mirror))
    )
    (pad 3 smd rect (at 1 0) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask)
      (net 2 "Net-(D1-Pad2)"))
    (pad 2 smd rect (at -1 -0.95) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask)
      (net 1 GND))
    (pad 1 smd rect (at -1 0.95) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask)
      (net 8 REL_SW))
    (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder (layer B.Cu) (tedit 5F68FEEE) (tstamp 61012E7A)
    (at -16.25 -50 90)
    (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /61022CF9)
    (attr smd)
    (fp_text reference D1 (at 0 1.82 90) (layer B.SilkS)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_text value D (at 0 -1.82 90) (layer B.Fab)
      (effects (font (size 1 1) (thickness 0.15)) (justify mirror))
    )
    (fp_line (start 2.45 -1.12) (end -2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start 2.45 1.12) (end 2.45 -1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 1.12) (end 2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -2.45 -1.12) (end -2.45 1.12) (layer B.CrtYd) (width 0.05))
    (fp_line (start -0.727064 -0.91) (end 0.727064 -0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start -0.727064 0.91) (end 0.727064 0.91) (layer B.SilkS) (width 0.12))
    (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1))
    (fp_text user %R (at 0 0 90) (layer B.Fab)
      (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror))
    )
    (pad 2 smd roundrect (at 1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 2 "Net-(D1-Pad2)"))
    (pad 1 smd roundrect (at -1.55 0 90) (size 1.3 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.1923076923076923)
      (net 13 VCC))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (gr_line (start 0 -70) (end 0 0) (layer Edge.Cuts) (width 0.1))
  (gr_line (start -30 -70) (end 0 -70) (layer Edge.Cuts) (width 0.1) (tstamp 610180ED))
  (gr_line (start -30 0) (end -30 -70) (layer Edge.Cuts) (width 0.1))
  (gr_line (start 0 0) (end -30 0) (layer Edge.Cuts) (width 0.1))

  (segment (start -16.1 -28.35) (end -16.1 -31.3) (width 0.4) (layer B.Cu) (net 1))
  (segment (start -15.3 -27.55) (end -16.1 -28.35) (width 0.4) (layer B.Cu) (net 1))
  (segment (start -15.3 -22.8) (end -15.3 -27.55) (width 0.4) (layer B.Cu) (net 1))
  (segment (start -4.8 -33.25) (end -4.8 -30.95) (width 0.4) (layer B.Cu) (net 1))
  (segment (start -18.8 -38.6) (end -18.8 -37.02854) (width 0.4) (layer B.Cu) (net 1))
  (segment (start -18.8 -37.02854) (end -16.1 -34.32854) (width 0.4) (layer B.Cu) (net 1))
  (segment (start -16.1 -34.32854) (end -16.1 -31.3) (width 0.4) (layer B.Cu) (net 1))
  (segment (start -16.9 -21.25) (end -16.9 -22.8) (width 0.4) (layer B.Cu) (net 1))
  (segment (start -16.8 -21.15) (end -16.9 -21.25) (width 0.4) (layer B.Cu) (net 1))
  (segment (start -15.4 -21.15) (end -16.8 -21.15) (width 0.4) (layer B.Cu) (net 1))
  (segment (start -15.3 -21.25) (end -15.4 -21.15) (width 0.4) (layer B.Cu) (net 1))
  (segment (start -15.3 -22.8) (end -15.3 -21.25) (width 0.4) (layer B.Cu) (net 1))
  (segment (start -4.8 -30.95) (end -2.5 -30.95) (width 0.4) (layer F.Cu) (net 1))
  (via (at -2.5 -13.45) (size 1.2) (drill 0.4) (layers F.Cu B.Cu) (net 1))
  (segment (start -1 -29.45) (end -2.5 -30.95) (width 0.4) (layer F.Cu) (net 1))
  (segment (start -1 -14.25) (end -1 -29.45) (width 0.4) (layer F.Cu) (net 1))
  (segment (start -1.8 -13.45) (end -1 -14.25) (width 0.4) (layer F.Cu) (net 1))
  (segment (start -2.5 -13.45) (end -1.8 -13.45) (width 0.4) (layer F.Cu) (net 1))
  (segment (start -4.8 -30.95) (end -16.1 -30.95) (width 0.4) (layer F.Cu) (net 1))
  (segment (start -18.8 -33.65) (end -18.8 -38.6) (width 0.4) (layer F.Cu) (net 1))
  (segment (start -16.1 -30.95) (end -18.8 -33.65) (width 0.4) (layer F.Cu) (net 1))
  (segment (start -8.65 -56.8) (end -4.5 -56.8) (width 0.4) (layer F.Cu) (net 1))
  (segment (start -18.8 -46.65) (end -8.65 -56.8) (width 0.4) (layer F.Cu) (net 1))
  (segment (start -18.8 -38.6) (end -18.8 -46.65) (width 0.4) (layer F.Cu) (net 1))
  (segment (start -18.75 -51.55) (end -16.25 -51.55) (width 0.4) (layer B.Cu) (net 2))
  (segment (start -15.7 -56) (end -13.9 -56) (width 0.4) (layer B.Cu) (net 2))
  (segment (start -16.25 -55.45) (end -15.7 -56) (width 0.4) (layer B.Cu) (net 2))
  (segment (start -16.25 -51.55) (end -16.25 -55.45) (width 0.4) (layer B.Cu) (net 2))
  (segment (start -21.4 -52.15) (end -20 -52.15) (width 0.4) (layer B.Cu) (net 2))
  (segment (start -19.4 -51.55) (end -18.75 -51.55) (width 0.4) (layer B.Cu) (net 2))
  (segment (start -20 -52.15) (end -19.4 -51.55) (width 0.4) (layer B.Cu) (net 2))
  (segment (start -2.95 -54.3) (end -4.5 -54.3) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -2.4 -53.75) (end -2.95 -54.3) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -2.4 -48.7) (end -2.4 -53.75) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -6.55 -54.3) (end -4.5 -54.3) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -9.3 -48.95) (end -7.2 -51.05) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -20.75 -29.85) (end -21.95 -29.85) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -14.5 -49.4) (end -14.5 -48.1) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -7.2 -51.05) (end -7.2 -53.65) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -21.95 -29.85) (end -22.15 -30.05) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -22.15 -45) (end -20.3 -46.85) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -22.15 -30.05) (end -22.15 -45) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -9.3 -47.65) (end -9.3 -48.95) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -20.3 -46.85) (end -20.3 -49.35) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -20.3 -49.35) (end -19.65 -50) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -7.2 -53.65) (end -6.55 -54.3) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -19.65 -50) (end -15.1 -50) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -15.1 -50) (end -14.5 -49.4) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -14.5 -48.1) (end -13.35 -46.95) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -10 -46.95) (end -9.3 -47.65) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -13.35 -46.95) (end -10 -46.95) (width 0.4) (layer B.Cu) (net 3))
  (segment (start -12.5 -61.6) (end -12.5 -65.5) (width 0.4) (layer B.Cu) (net 4))
  (segment (start -14.6 -59.5) (end -12.5 -61.6) (width 0.4) (layer B.Cu) (net 4))
  (segment (start -25.1 -59.5) (end -14.6 -59.5) (width 0.4) (layer B.Cu) (net 4))
  (segment (start -26.1 -58.5) (end -25.1 -59.5) (width 0.4) (layer B.Cu) (net 4))
  (segment (start -26.1 -56) (end -26.1 -58.5) (width 0.4) (layer B.Cu) (net 4))
  (segment (start -7.5 -60.9) (end -7.5 -65.5) (width 0.4) (layer B.Cu) (net 5))
  (segment (start -9.5 -58.9) (end -7.5 -60.9) (width 0.4) (layer B.Cu) (net 5))
  (segment (start -9.5 -55.9) (end -9.5 -58.9) (width 0.4) (layer B.Cu) (net 5))
  (segment (start -11.9 -53.5) (end -9.5 -55.9) (width 0.4) (layer B.Cu) (net 5))
  (segment (start -11.9 -50) (end -11.9 -53.5) (width 0.4) (layer B.Cu) (net 5))
  (segment (start -11.1 -38.68) (end -11.18 -38.6) (width 0.4) (layer B.Cu) (net 6))
  (segment (start -11.18 -35.02) (end -11.2 -35) (width 0.4) (layer B.Cu) (net 6))
  (segment (start -11.18 -38.6) (end -11.18 -35.02) (width 0.4) (layer B.Cu) (net 6))
  (segment (start -11.2 -31.9) (end -11.2 -35) (width 0.4) (layer B.Cu) (net 6))
  (segment (start -10.4 -31.1) (end -11.2 -31.9) (width 0.4) (layer B.Cu) (net 6))
  (segment (start -10.4 -28.65) (end -10.4 -31.1) (width 0.4) (layer B.Cu) (net 6))
  (segment (start -10.8 -28.25) (end -10.4 -28.65) (width 0.4) (layer B.Cu) (net 6))
  (segment (start -12.25 -28.25) (end -10.8 -28.25) (width 0.4) (layer B.Cu) (net 6))
  (segment (start -13.72 -40.38) (end -13.72 -38.6) (width 0.4) (layer B.Cu) (net 7))
  (segment (start -13 -41.1) (end -13.72 -40.38) (width 0.4) (layer B.Cu) (net 7))
  (segment (start -11.1 -41.1) (end -13 -41.1) (width 0.4) (layer B.Cu) (net 7))
  (segment (start -9.3 -28.25) (end -10.1 -27.45) (width 0.4) (layer B.Cu) (net 7))
  (segment (start -9.3 -39.45) (end -9.3 -28.25) (width 0.4) (layer B.Cu) (net 7))
  (segment (start -10.95 -41.1) (end -9.3 -39.45) (width 0.4) (layer B.Cu) (net 7))
  (segment (start -10.1 -27.45) (end -12.25 -27.45) (width 0.4) (layer B.Cu) (net 7))
  (segment (start -11.1 -41.1) (end -10.95 -41.1) (width 0.4) (layer B.Cu) (net 7))
  (segment (start -23.4 -51.2) (end -23.4 -49.55) (width 0.4) (layer B.Cu) (net 8))
  (segment (start -23.25 -49.4) (end -23.25 -47.4) (width 0.4) (layer B.Cu) (net 8))
  (segment (start -23.4 -49.55) (end -23.25 -49.4) (width 0.4) (layer B.Cu) (net 8))
  (segment (start -23.25 -46.3) (end -23.25 -47.4) (width 0.4) (layer B.Cu) (net 8))
  (segment (start -23.25 -29.8) (end -23.25 -46.3) (width 0.4) (layer B.Cu) (net 8))
  (segment (start -22.5 -29.05) (end -23.25 -29.8) (width 0.4) (layer B.Cu) (net 8))
  (segment (start -20.75 -29.05) (end -22.5 -29.05) (width 0.4) (layer B.Cu) (net 8))
  (segment (start -19.1 -10.8) (end -25.6 -10.8) (width 0.4) (layer F.Cu) (net 9))
  (segment (start -19.2 -10.8) (end -19.1 -10.8) (width 0.4) (layer B.Cu) (net 9))
  (segment (start -25.6 -9.4) (end -25.6 -10.8) (width 0.4) (layer B.Cu) (net 9))
  (segment (start -25.2 -9) (end -25.6 -9.4) (width 0.4) (layer B.Cu) (net 9))
  (segment (start -24.25 -9) (end -25.2 -9) (width 0.4) (layer B.Cu) (net 9))
  (segment (start -21.65 -6.4) (end -24.25 -9) (width 0.4) (layer B.Cu) (net 9))
  (segment (start -21.65 -2.6) (end -21.65 -6.4) (width 0.4) (layer B.Cu) (net 9))
  (segment (start -27.7 -10.8) (end -25.6 -10.8) (width 0.4) (layer B.Cu) (net 9))
  (segment (start -29 -12.1) (end -27.7 -10.8) (width 0.4) (layer B.Cu) (net 9))
  (segment (start -29 -18.2) (end -29 -12.1) (width 0.4) (layer B.Cu) (net 9))
  (segment (start -28.2 -19) (end -29 -18.2) (width 0.4) (layer B.Cu) (net 9))
  (segment (start -23.7 -19) (end -28.2 -19) (width 0.4) (layer B.Cu) (net 9))
  (segment (start -23.2 -19.5) (end -23.7 -19) (width 0.4) (layer B.Cu) (net 9))
  (segment (start -23.2 -24.5) (end -23.2 -19.5) (width 0.4) (layer B.Cu) (net 9))
  (segment (start -22.65 -25.05) (end -23.2 -24.5) (width 0.4) (layer B.Cu) (net 9))
  (segment (start -20.75 -25.05) (end -22.65 -25.05) (width 0.4) (layer B.Cu) (net 9))
  (segment (start -10.4 -10.8) (end -3.9 -10.8) (width 0.4) (layer F.Cu) (net 10))
  (segment (start -10.4 -10.8) (end -10.4 -9.05) (width 0.4) (layer B.Cu) (net 10))
  (segment (start -8.2 -6.85) (end -10.4 -9.05) (width 0.4) (layer B.Cu) (net 10))
  (segment (start -8.2 -2.8) (end -8.2 -6.85) (width 0.4) (layer B.Cu) (net 10))
  (segment (start -22.4 -24.05) (end -22.2 -24.25) (width 0.4) (layer B.Cu) (net 10))
  (segment (start -21.05 -8.6) (end -22.4 -9.95) (width 0.4) (layer B.Cu) (net 10))
  (segment (start -18.55 -8.6) (end -21.05 -8.6) (width 0.4) (layer B.Cu) (net 10))
  (segment (start -22.4 -9.95) (end -22.4 -24.05) (width 0.4) (layer B.Cu) (net 10))
  (segment (start -16.6 -6.65) (end -18.55 -8.6) (width 0.4) (layer B.Cu) (net 10))
  (segment (start -12.8 -6.65) (end -16.6 -6.65) (width 0.4) (layer B.Cu) (net 10))
  (segment (start -10.4 -9.05) (end -12.8 -6.65) (width 0.4) (layer B.Cu) (net 10))
  (segment (start -20.75 -24.25) (end -22.2 -24.25) (width 0.4) (layer B.Cu) (net 10))
  (segment (start -12.42 -15.55) (end -10 -15.55) (width 0.4) (layer B.Cu) (net 11))
  (segment (start -9.4 -16.15) (end -9.4 -18.45) (width 0.4) (layer B.Cu) (net 11))
  (segment (start -10 -15.55) (end -9.4 -16.15) (width 0.4) (layer B.Cu) (net 11))
  (segment (start -18.5 -18.15) (end -18.5 -22.8) (width 0.4) (layer B.Cu) (net 11))
  (segment (start -17.9 -17.55) (end -18.5 -18.15) (width 0.4) (layer B.Cu) (net 11))
  (segment (start -16 -17.55) (end -17.9 -17.55) (width 0.4) (layer B.Cu) (net 11))
  (segment (start -14 -15.55) (end -16 -17.55) (width 0.4) (layer B.Cu) (net 11))
  (segment (start -12.42 -15.55) (end -14 -15.55) (width 0.4) (layer B.Cu) (net 11))
  (segment (start -14.6 -11.25) (end -14.6 -12.75) (width 0.4) (layer B.Cu) (net 12))
  (segment (start -14.6 -12.75) (end -15.2 -13.35) (width 0.4) (layer B.Cu) (net 12))
  (segment (start -15.2 -13.35) (end -16.9 -13.35) (width 0.4) (layer B.Cu) (net 12))
  (segment (start -17.3 -13.75) (end -17.3 -15.55) (width 0.4) (layer B.Cu) (net 12))
  (segment (start -16.9 -13.35) (end -17.3 -13.75) (width 0.4) (layer B.Cu) (net 12))
  (segment (start -17.3 -15.55) (end -18.7 -15.55) (width 0.4) (layer B.Cu) (net 12))
  (segment (start -19.3 -16.15) (end -19.3 -22.8) (width 0.4) (layer B.Cu) (net 12))
  (segment (start -18.7 -15.55) (end -19.3 -16.15) (width 0.4) (layer B.Cu) (net 12))
  (segment (start -16.25 -47.25) (end -16.25 -48.45) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -25.6 -6.3) (end -19.1 -6.3) (width 0.4) (layer F.Cu) (net 13))
  (segment (start -10.4 -6.3) (end -3.9 -6.3) (width 0.4) (layer F.Cu) (net 13))
  (segment (start -7.57 -46.03) (end -6.3 -46.03) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -13.9 -45.9) (end -13.9 -44) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -18.45 -31.25) (end -18.5 -31.3) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -18.45 -27.9) (end -18.45 -31.25) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -16.95 -26.4) (end -18.45 -27.9) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -16.95 -24.85) (end -16.95 -26.4) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -13.9 -42.6) (end -13.9 -44) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -16.26 -40.24) (end -13.9 -42.6) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -16.26 -38.6) (end -16.26 -40.24) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -8.5 -46.03) (end -7.57 -46.03) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -8.5 -48.45) (end -8.5 -46.03) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -6.4 -50.55) (end -8.5 -48.45) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -6.4 -51.55) (end -6.4 -50.55) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -6.15 -51.8) (end -6.4 -51.55) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -4.5 -51.8) (end -6.15 -51.8) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -3.5 -45.6) (end -2.4 -45.6) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -3.93 -46.03) (end -3.5 -45.6) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -6.3 -46.03) (end -3.93 -46.03) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -16.1 -24.65) (end -16.1 -22.8) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -16.3 -24.85) (end -16.1 -24.65) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -16.95 -24.85) (end -16.3 -24.85) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -17.5 -24.85) (end -16.95 -24.85) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -17.7 -24.65) (end -17.5 -24.85) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -17.7 -22.8) (end -17.7 -24.65) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -1.65 -6.3) (end -3.9 -6.3) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -0.6 -7.35) (end -1.65 -6.3) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -0.6 -19.85) (end -0.6 -7.35) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -2 -21.25) (end -0.6 -19.85) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -4.8 -21.25) (end -2 -21.25) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -20.25 -45.3) (end -17.5 -45.3) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -21.3 -44.25) (end -20.25 -45.3) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -21.3 -35.85) (end -21.3 -44.25) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -18.5 -33.05) (end -21.3 -35.85) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -18.5 -31.3) (end -18.5 -33.05) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -10.4 -6.2) (end -10.4 -6.3) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -12.55 -4.05) (end -10.4 -6.2) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -17.05 -4.05) (end -12.55 -4.05) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -19.1 -6.1) (end -17.05 -4.05) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -19.1 -6.3) (end -19.1 -6.1) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -17.5 -45.3) (end -17.5 -46.65) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -16.9 -47.25) (end -16.25 -47.25) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -17.5 -46.65) (end -16.9 -47.25) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -13.77 -46.03) (end -13.9 -45.9) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -11.1 -44.2) (end -11.1 -46.01) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -11.08 -46.03) (end -13.77 -46.03) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -11.1 -46.01) (end -11.08 -46.03) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -7.57 -46.03) (end -11.08 -46.03) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -13.9 -46.15) (end -13.9 -45.9) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -15 -47.25) (end -13.9 -46.15) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -16.25 -47.25) (end -15 -47.25) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -17.7 -19.65) (end -17.7 -22.8) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -17 -18.95) (end -17.7 -19.65) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -13 -18.95) (end -17 -18.95) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -8.5 -21.75) (end -10.2 -21.75) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -6.7 -23.55) (end -8.5 -21.75) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -10.2 -21.75) (end -13 -18.95) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -4.8 -23.55) (end -6.7 -23.55) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -7.5 -38.95) (end -7.5 -38.05) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -9.4 -40.85) (end -7.5 -38.95) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -9.4 -41.85) (end -9.4 -40.85) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -11.1 -43.55) (end -9.4 -41.85) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -11.1 -44.2) (end -11.1 -43.55) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -16.26 -35.61) (end -16.26 -38.6) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -15.65 -35) (end -16.26 -35.61) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -14.3 -35) (end -15.65 -35) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -4.8 -23.55) (end -4.8 -21.25) (width 0.4) (layer B.Cu) (net 13))
  (segment (start -7.99 -44.76) (end -6.3 -44.76) (width 0.4) (layer B.Cu) (net 14))
  (segment (start -8.4 -44.35) (end -7.99 -44.76) (width 0.4) (layer B.Cu) (net 14))
  (segment (start -8.4 -41.25) (end -8.4 -44.35) (width 0.4) (layer B.Cu) (net 14))
  (segment (start -7.6 -40.45) (end -8.4 -41.25) (width 0.4) (layer B.Cu) (net 14))
  (segment (start -3.05 -40.45) (end -7.6 -40.45) (width 0.4) (layer B.Cu) (net 14))
  (segment (start -2.1 -39.5) (end -3.05 -40.45) (width 0.4) (layer B.Cu) (net 14))
  (segment (start -2.1 -28.4) (end -2.1 -39.5) (width 0.4) (layer B.Cu) (net 14))
  (segment (start -2.4 -28.1) (end -2.1 -28.4) (width 0.4) (layer B.Cu) (net 14))
  (segment (start -3.25 -28.1) (end -2.4 -28.1) (width 0.4) (layer B.Cu) (net 14))
  (segment (start -9.3 -26.65) (end -12.25 -26.65) (width 0.4) (layer B.Cu) (net 15))
  (segment (start -7.85 -28.1) (end -9.3 -26.65) (width 0.4) (layer B.Cu) (net 15))
  (segment (start -6.35 -28.1) (end -7.85 -28.1) (width 0.4) (layer B.Cu) (net 15))
  (segment (start -8.4 -33.05) (end -8.4 -28.55) (width 0.4) (layer B.Cu) (net 15))
  (segment (start -8.4 -28.55) (end -7.9 -28.05) (width 0.4) (layer B.Cu) (net 15))
  (segment (start -7.5 -33.95) (end -8.4 -33.05) (width 0.4) (layer B.Cu) (net 15))
  (segment (start -7.5 -34.95) (end -7.5 -33.95) (width 0.4) (layer B.Cu) (net 15))
  (segment (start -1.94 -43.49) (end -4.49 -43.49) (width 0.4) (layer B.Cu) (net 16))
  (segment (start -0.5 -26.45) (end -0.5 -42.05) (width 0.4) (layer B.Cu) (net 16))
  (segment (start -0.5 -42.05) (end -1.94 -43.49) (width 0.4) (layer B.Cu) (net 16))
  (segment (start -1.1 -25.85) (end -0.5 -26.45) (width 0.4) (layer B.Cu) (net 16))
  (segment (start -7.8 -25.85) (end -1.1 -25.85) (width 0.4) (layer B.Cu) (net 16))
  (segment (start -4.49 -43.49) (end -6.3 -43.49) (width 0.4) (layer B.Cu) (net 16))
  (segment (start -8.6 -25.05) (end -7.8 -25.85) (width 0.4) (layer B.Cu) (net 16))
  (segment (start -12.25 -25.05) (end -8.6 -25.05) (width 0.4) (layer B.Cu) (net 16))
  (segment (start -9 -25.85) (end -12.25 -25.85) (width 0.4) (layer B.Cu) (net 17))
  (segment (start -8.2 -26.65) (end -9 -25.85) (width 0.4) (layer B.Cu) (net 17))
  (segment (start -1.9 -26.65) (end -8.2 -26.65) (width 0.4) (layer B.Cu) (net 17))
  (segment (start -1.3 -27.25) (end -1.9 -26.65) (width 0.4) (layer B.Cu) (net 17))
  (segment (start -1.3 -40.85) (end -1.3 -27.25) (width 0.4) (layer B.Cu) (net 17))
  (segment (start -2.67 -42.22) (end -1.3 -40.85) (width 0.4) (layer B.Cu) (net 17))
  (segment (start -6.3 -42.22) (end -2.67 -42.22) (width 0.4) (layer B.Cu) (net 17))
  (segment (start -25.3 -23.55) (end -25.3 -21.25) (width 0.4) (layer B.Cu) (net 18))
  (segment (start -22.55 -65.45) (end -22.5 -65.5) (width 0.4) (layer B.Cu) (net 18))
  (segment (start -29.1 -63.05) (end -26.7 -65.45) (width 0.4) (layer B.Cu) (net 18))
  (segment (start -29.1 -24.4) (end -29.1 -63.05) (width 0.4) (layer B.Cu) (net 18))
  (segment (start -28.25 -23.55) (end -29.1 -24.4) (width 0.4) (layer B.Cu) (net 18))
  (segment (start -26.7 -65.45) (end -22.55 -65.45) (width 0.4) (layer B.Cu) (net 18))
  (segment (start -25.3 -23.55) (end -28.25 -23.55) (width 0.4) (layer B.Cu) (net 18))
  (segment (start -25.3 -33.25) (end -25.3 -30.95) (width 0.4) (layer B.Cu) (net 19))
  (segment (start -18.5 -61.95) (end -17.5 -62.95) (width 0.4) (layer B.Cu) (net 19))
  (segment (start -26.6 -61.95) (end -18.5 -61.95) (width 0.4) (layer B.Cu) (net 19))
  (segment (start -28.2 -60.35) (end -26.6 -61.95) (width 0.4) (layer B.Cu) (net 19))
  (segment (start -17.5 -62.95) (end -17.5 -65.5) (width 0.4) (layer B.Cu) (net 19))
  (segment (start -28.2 -34.35) (end -28.2 -60.35) (width 0.4) (layer B.Cu) (net 19))
  (segment (start -27.1 -33.25) (end -28.2 -34.35) (width 0.4) (layer B.Cu) (net 19))
  (segment (start -25.3 -33.25) (end -27.1 -33.25) (width 0.4) (layer B.Cu) (net 19))

  (zone (net 0) (net_name "") (layer B.Cu) (tstamp 0) (hatch edge 0.508)
    (connect_pads (clearance 0.508))
    (min_thickness 0.254)
    (keepout (tracks allowed) (vias allowed) (copperpour not_allowed))
    (fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
    (polygon
      (pts
        (xy -12 -24) (xy -18 -24) (xy -18 -30) (xy -12 -30)
      )
    )
  )
  (zone (net 1) (net_name GND) (layer B.Cu) (tstamp 610289AD) (hatch edge 0.508)
    (connect_pads yes (clearance 0.508))
    (min_thickness 0.254)
    (fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
    (polygon
      (pts
        (xy 0 0) (xy -30 0) (xy -30 -70) (xy 0 -70)
      )
    )
    (filled_polygon
      (pts
        (xy -21.55 -23.336928) (xy -20.213072 -23.336928) (xy -20.213072 -22) (xy -20.200812 -21.875518) (xy -20.164502 -21.75582)
        (xy -20.134999 -21.700625) (xy -20.135 -16.191019) (xy -20.13904 -16.15) (xy -20.135 -16.108982) (xy -20.122918 -15.986312)
        (xy -20.075172 -15.828914) (xy -19.997636 -15.683855) (xy -19.893291 -15.556709) (xy -19.861422 -15.530555) (xy -19.319442 -14.988574)
        (xy -19.293291 -14.956709) (xy -19.216827 -14.893957) (xy -19.166146 -14.852364) (xy -19.021087 -14.774828) (xy -18.863689 -14.727082)
        (xy -18.700001 -14.71096) (xy -18.658982 -14.715) (xy -18.407795 -14.715) (xy -18.375799 -14.667114) (xy -18.182886 -14.474201)
        (xy -18.135 -14.442204) (xy -18.135 -13.791019) (xy -18.13904 -13.75) (xy -18.135 -13.708982) (xy -18.122918 -13.586312)
        (xy -18.075172 -13.428914) (xy -17.997636 -13.283855) (xy -17.893291 -13.156709) (xy -17.861421 -13.130554) (xy -17.519446 -12.788579)
        (xy -17.493291 -12.756709) (xy -17.366146 -12.652364) (xy -17.221087 -12.574828) (xy -17.063689 -12.527082) (xy -16.941019 -12.515)
        (xy -16.941009 -12.515) (xy -16.900001 -12.510961) (xy -16.858993 -12.515) (xy -15.545867 -12.515) (xy -15.516121 -12.485254)
        (xy -15.564851 -12.470472) (xy -15.718387 -12.388405) (xy -15.852962 -12.277962) (xy -15.963405 -12.143387) (xy -16.045472 -11.989851)
        (xy -16.096008 -11.823255) (xy -16.113072 -11.650001) (xy -16.113072 -10.849999) (xy -16.096008 -10.676745) (xy -16.045472 -10.510149)
        (xy -15.963405 -10.356613) (xy -15.852962 -10.222038) (xy -15.718387 -10.111595) (xy -15.564851 -10.029528) (xy -15.398255 -9.978992)
        (xy -15.225001 -9.961928) (xy -13.974999 -9.961928) (xy -13.801745 -9.978992) (xy -13.635149 -10.029528) (xy -13.481613 -10.111595)
        (xy -13.347038 -10.222038) (xy -13.236595 -10.356613) (xy -13.154528 -10.510149) (xy -13.103992 -10.676745) (xy -13.086928 -10.849999)
        (xy -13.086928 -11.650001) (xy -13.103992 -11.823255) (xy -13.154528 -11.989851) (xy -13.236595 -12.143387) (xy -13.347038 -12.277962)
        (xy -13.481613 -12.388405) (xy -13.635149 -12.470472) (xy -13.765 -12.509862) (xy -13.765 -12.708982) (xy -13.76096 -12.750001)
        (xy -13.777082 -12.913689) (xy -13.824828 -13.071087) (xy -13.902364 -13.216146) (xy -14.006709 -13.343291) (xy -14.038574 -13.369442)
        (xy -14.580555 -13.911422) (xy -14.606709 -13.943291) (xy -14.733854 -14.047636) (xy -14.878913 -14.125172) (xy -15.036311 -14.172918)
        (xy -15.158981 -14.185) (xy -15.158982 -14.185) (xy -15.2 -14.18904) (xy -15.241018 -14.185) (xy -16.465 -14.185)
        (xy -16.465 -14.442205) (xy -16.417114 -14.474201) (xy -16.224201 -14.667114) (xy -16.072629 -14.893957) (xy -15.968225 -15.146011)
        (xy -15.915 -15.413589) (xy -15.915 -15.686411) (xy -15.968225 -15.953989) (xy -16.072629 -16.206043) (xy -16.224201 -16.432886)
        (xy -16.417114 -16.625799) (xy -16.550612 -16.715) (xy -16.345867 -16.715) (xy -14.619441 -14.988573) (xy -14.593291 -14.956709)
        (xy -14.516827 -14.893957) (xy -14.466146 -14.852364) (xy -14.321087 -14.774828) (xy -14.163689 -14.727082) (xy -14.000001 -14.71096)
        (xy -13.958982 -14.715) (xy -13.527795 -14.715) (xy -13.495799 -14.667114) (xy -13.302886 -14.474201) (xy -13.076043 -14.322629)
        (xy -12.823989 -14.218225) (xy -12.556411 -14.165) (xy -12.283589 -14.165) (xy -12.016011 -14.218225) (xy -11.763957 -14.322629)
        (xy -11.537114 -14.474201) (xy -11.344201 -14.667114) (xy -11.312205 -14.715) (xy -10.041018 -14.715) (xy -10 -14.71096)
        (xy -9.958982 -14.715) (xy -9.958981 -14.715) (xy -9.836311 -14.727082) (xy -9.678913 -14.774828) (xy -9.533854 -14.852364)
        (xy -9.406709 -14.956709) (xy -9.380555 -14.988578) (xy -8.838573 -15.530559) (xy -8.806709 -15.556709) (xy -8.702364 -15.683854)
        (xy -8.624828 -15.828913) (xy -8.577082 -15.986311) (xy -8.565 -16.108981) (xy -8.565 -16.108982) (xy -8.56096 -16.149999)
        (xy -8.565 -16.191018) (xy -8.565 -16.70043) (xy -6.035 -16.70043) (xy -6.035 -16.29957) (xy -5.956796 -15.906413)
        (xy -5.803393 -15.536066) (xy -5.580687 -15.202763) (xy -5.297237 -14.919313) (xy -4.963934 -14.696607) (xy -4.593587 -14.543204)
        (xy -4.20043 -14.465) (xy -3.79957 -14.465) (xy -3.406413 -14.543204) (xy -3.036066 -14.696607) (xy -2.702763 -14.919313)
        (xy -2.419313 -15.202763) (xy -2.196607 -15.536066) (xy -2.043204 -15.906413) (xy -1.965 -16.29957) (xy -1.965 -16.70043)
        (xy -2.043204 -17.093587) (xy -2.196607 -17.463934) (xy -2.419313 -17.797237) (xy -2.702763 -18.080687) (xy -3.036066 -18.303393)
        (xy -3.406413 -18.456796) (xy -3.79957 -18.535) (xy -4.20043 -18.535) (xy -4.593587 -18.456796) (xy -4.963934 -18.303393)
        (xy -5.297237 -18.080687) (xy -5.580687 -17.797237) (xy -5.803393 -17.463934) (xy -5.956796 -17.093587) (xy -6.035 -16.70043)
        (xy -8.565 -16.70043) (xy -8.565 -17.055386) (xy -8.506613 -17.086595) (xy -8.372038 -17.197038) (xy -8.261595 -17.331613)
        (xy -8.179528 -17.485149) (xy -8.128992 -17.651745) (xy -8.111928 -17.824999) (xy -8.111928 -19.075001) (xy -8.128992 -19.248255)
        (xy -8.179528 -19.414851) (xy -8.261595 -19.568387) (xy -8.372038 -19.702962) (xy -8.506613 -19.813405) (xy -8.660149 -19.895472)
        (xy -8.826745 -19.946008) (xy -8.999999 -19.963072) (xy -9.800001 -19.963072) (xy -9.973255 -19.946008) (xy -10.139851 -19.895472)
        (xy -10.293387 -19.813405) (xy -10.427962 -19.702962) (xy -10.538405 -19.568387) (xy -10.620472 -19.414851) (xy -10.671008 -19.248255)
        (xy -10.688072 -19.075001) (xy -10.688072 -17.824999) (xy -10.671008 -17.651745) (xy -10.620472 -17.485149) (xy -10.538405 -17.331613)
        (xy -10.427962 -17.197038) (xy -10.293387 -17.086595) (xy -10.235 -17.055386) (xy -10.235 -16.495868) (xy -10.345867 -16.385)
        (xy -11.312205 -16.385) (xy -11.344201 -16.432886) (xy -11.537114 -16.625799) (xy -11.763957 -16.777371) (xy -12.016011 -16.881775)
        (xy -12.283589 -16.935) (xy -12.556411 -16.935) (xy -12.823989 -16.881775) (xy -13.076043 -16.777371) (xy -13.302886 -16.625799)
        (xy -13.495799 -16.432886) (xy -13.527795 -16.385) (xy -13.654132 -16.385) (xy -15.380554 -18.111421) (xy -15.383491 -18.115)
        (xy -13.041018 -18.115) (xy -13 -18.11096) (xy -12.958982 -18.115) (xy -12.958981 -18.115) (xy -12.836311 -18.127082)
        (xy -12.678913 -18.174828) (xy -12.533854 -18.252364) (xy -12.406709 -18.356709) (xy -12.380554 -18.388579) (xy -9.854132 -20.915)
        (xy -8.541018 -20.915) (xy -8.5 -20.91096) (xy -8.458982 -20.915) (xy -8.458981 -20.915) (xy -8.336311 -20.927082)
        (xy -8.178913 -20.974828) (xy -8.033854 -21.052364) (xy -7.906709 -21.156709) (xy -7.880554 -21.188579) (xy -6.411005 -22.658127)
        (xy -6.238531 -22.4) (xy -6.426156 -22.119199) (xy -6.564482 -21.78525) (xy -6.635 -21.430732) (xy -6.635 -21.069268)
        (xy -6.564482 -20.71475) (xy -6.426156 -20.380801) (xy -6.225338 -20.080256) (xy -5.969744 -19.824662) (xy -5.669199 -19.623844)
        (xy -5.33525 -19.485518) (xy -4.980732 -19.415) (xy -4.619268 -19.415) (xy -4.26475 -19.485518) (xy -3.930801 -19.623844)
        (xy -3.630256 -19.824662) (xy -3.374662 -20.080256) (xy -3.173844 -20.380801) (xy -3.159678 -20.415) (xy -2.345867 -20.415)
        (xy -1.435 -19.504132) (xy -1.434999 -7.695869) (xy -1.995867 -7.135) (xy -2.491532 -7.135) (xy -2.630013 -7.342252)
        (xy -2.857748 -7.569987) (xy -3.125537 -7.748918) (xy -3.423088 -7.872168) (xy -3.738967 -7.935) (xy -4.061033 -7.935)
        (xy -4.376912 -7.872168) (xy -4.674463 -7.748918) (xy -4.942252 -7.569987) (xy -5.169987 -7.342252) (xy -5.348918 -7.074463)
        (xy -5.472168 -6.776912) (xy -5.535 -6.461033) (xy -5.535 -6.138967) (xy -5.472168 -5.823088) (xy -5.348918 -5.525537)
        (xy -5.169987 -5.257748) (xy -4.942252 -5.030013) (xy -4.674463 -4.851082) (xy -4.376912 -4.727832) (xy -4.061033 -4.665)
        (xy -3.738967 -4.665) (xy -3.423088 -4.727832) (xy -3.125537 -4.851082) (xy -2.857748 -5.030013) (xy -2.630013 -5.257748)
        (xy -2.491532 -5.465) (xy -1.691018 -5.465) (xy -1.65 -5.46096) (xy -1.608982 -5.465) (xy -1.608981 -5.465)
        (xy -1.486311 -5.477082) (xy -1.328913 -5.524828) (xy -1.183854 -5.602364) (xy -1.056709 -5.706709) (xy -1.030554 -5.738579)
        (xy -0.684999 -6.084134) (xy -0.684999 -2.845582) (xy -0.706772 -2.898147) (xy -0.891175 -3.174125) (xy -1.125875 -3.408825)
        (xy -1.401853 -3.593228) (xy -1.708504 -3.720246) (xy -2.034042 -3.785) (xy -2.365958 -3.785) (xy -2.691496 -3.720246)
        (xy -2.998147 -3.593228) (xy -3.274125 -3.408825) (xy -3.508825 -3.174125) (xy -3.693228 -2.898147) (xy -3.820246 -2.591496)
        (xy -3.885 -2.265958) (xy -3.885 -1.934042) (xy -3.820246 -1.608504) (xy -3.693228 -1.301853) (xy -3.508825 -1.025875)
        (xy -3.274125 -0.791175) (xy -3.115223 -0.685) (xy -26.884777 -0.685) (xy -26.725875 -0.791175) (xy -26.491175 -1.025875)
        (xy -26.306772 -1.301853) (xy -26.179754 -1.608504) (xy -26.115 -1.934042) (xy -26.115 -2.265958) (xy -26.179754 -2.591496)
        (xy -26.306772 -2.898147) (xy -26.491175 -3.174125) (xy -26.725875 -3.408825) (xy -27.001853 -3.593228) (xy -27.308504 -3.720246)
        (xy -27.634042 -3.785) (xy -27.965958 -3.785) (xy -28.291496 -3.720246) (xy -28.598147 -3.593228) (xy -28.874125 -3.408825)
        (xy -29.108825 -3.174125) (xy -29.293228 -2.898147) (xy -29.315 -2.845584) (xy -29.315 -6.461033) (xy -27.235 -6.461033)
        (xy -27.235 -6.138967) (xy -27.172168 -5.823088) (xy -27.048918 -5.525537) (xy -26.869987 -5.257748) (xy -26.642252 -5.030013)
        (xy -26.374463 -4.851082) (xy -26.076912 -4.727832) (xy -25.761033 -4.665) (xy -25.438967 -4.665) (xy -25.123088 -4.727832)
        (xy -24.825537 -4.851082) (xy -24.557748 -5.030013) (xy -24.330013 -5.257748) (xy -24.151082 -5.525537) (xy -24.027832 -5.823088)
        (xy -23.965 -6.138967) (xy -23.965 -6.461033) (xy -24.027832 -6.776912) (xy -24.151082 -7.074463) (xy -24.330013 -7.342252)
        (xy -24.557748 -7.569987) (xy -24.825537 -7.748918) (xy -25.123088 -7.872168) (xy -25.438967 -7.935) (xy -25.761033 -7.935)
        (xy -26.076912 -7.872168) (xy -26.374463 -7.748918) (xy -26.642252 -7.569987) (xy -26.869987 -7.342252) (xy -27.048918 -7.074463)
        (xy -27.172168 -6.776912) (xy -27.235 -6.461033) (xy -29.315 -6.461033) (xy -29.315 -11.234133) (xy -28.319437 -10.238568)
        (xy -28.293291 -10.206709) (xy -28.166146 -10.102364) (xy -28.021087 -10.024828) (xy -27.863689 -9.977082) (xy -27.741019 -9.965)
        (xy -27.741018 -9.965) (xy -27.7 -9.96096) (xy -27.658982 -9.965) (xy -27.008468 -9.965) (xy -26.869987 -9.757748)
        (xy -26.642252 -9.530013) (xy -26.438432 -9.393825) (xy -26.435 -9.358982) (xy -26.422918 -9.236312) (xy -26.375172 -9.078914)
        (xy -26.297636 -8.933855) (xy -26.193291 -8.806709) (xy -26.161421 -8.780554) (xy -25.819446 -8.438579) (xy -25.793291 -8.406709)
        (xy -25.666146 -8.302364) (xy -25.521087 -8.224828) (xy -25.363689 -8.177082) (xy -25.241019 -8.165) (xy -25.241009 -8.165)
        (xy -25.200001 -8.160961) (xy -25.158993 -8.165) (xy -24.595867 -8.165) (xy -22.484999 -6.054131) (xy -22.485 -3.994614)
        (xy -22.543387 -3.963405) (xy -22.677962 -3.852962) (xy -22.788405 -3.718387) (xy -22.870472 -3.564851) (xy -22.921008 -3.398255)
        (xy -22.938072 -3.225001) (xy -22.938072 -1.974999) (xy -22.921008 -1.801745) (xy -22.870472 -1.635149) (xy -22.788405 -1.481613)
        (xy -22.677962 -1.347038) (xy -22.543387 -1.236595) (xy -22.389851 -1.154528) (xy -22.223255 -1.103992) (xy -22.050001 -1.086928)
        (xy -21.249999 -1.086928) (xy -21.076745 -1.103992) (xy -20.910149 -1.154528) (xy -20.756613 -1.236595) (xy -20.622038 -1.347038)
        (xy -20.511595 -1.481613) (xy -20.429528 -1.635149) (xy -20.378992 -1.801745) (xy -20.361928 -1.974999) (xy -20.361928 -3.225001)
        (xy -20.378992 -3.398255) (xy -20.429528 -3.564851) (xy -20.511595 -3.718387) (xy -20.622038 -3.852962) (xy -20.756613 -3.963405)
        (xy -20.815 -3.994614) (xy -20.815 -6.358993) (xy -20.810961 -6.400001) (xy -20.815 -6.441009) (xy -20.815 -6.441019)
        (xy -20.827082 -6.563689) (xy -20.874828 -6.721087) (xy -20.952364 -6.866146) (xy -21.056709 -6.993291) (xy -21.088573 -7.019441)
        (xy -23.630554 -9.561421) (xy -23.656709 -9.593291) (xy -23.783854 -9.697636) (xy -23.928913 -9.775172) (xy -24.086311 -9.822918)
        (xy -24.208981 -9.835) (xy -24.208982 -9.835) (xy -24.25 -9.83904) (xy -24.277506 -9.836331) (xy -24.151082 -10.025537)
        (xy -24.027832 -10.323088) (xy -23.965 -10.638967) (xy -23.965 -10.961033) (xy -24.027832 -11.276912) (xy -24.151082 -11.574463)
        (xy -24.330013 -11.842252) (xy -24.557748 -12.069987) (xy -24.825537 -12.248918) (xy -25.123088 -12.372168) (xy -25.438967 -12.435)
        (xy -25.761033 -12.435) (xy -26.076912 -12.372168) (xy -26.374463 -12.248918) (xy -26.642252 -12.069987) (xy -26.869987 -11.842252)
        (xy -27.008468 -11.635) (xy -27.354131 -11.635) (xy -28.165 -12.445867) (xy -28.165 -17.854132) (xy -27.854132 -18.165)
        (xy -27.171054 -18.165) (xy -27.297237 -18.080687) (xy -27.580687 -17.797237) (xy -27.803393 -17.463934) (xy -27.956796 -17.093587)
        (xy -28.035 -16.70043) (xy -28.035 -16.29957) (xy -27.956796 -15.906413) (xy -27.803393 -15.536066) (xy -27.580687 -15.202763)
        (xy -27.297237 -14.919313) (xy -26.963934 -14.696607) (xy -26.593587 -14.543204) (xy -26.20043 -14.465) (xy -25.79957 -14.465)
        (xy -25.406413 -14.543204) (xy -25.036066 -14.696607) (xy -24.702763 -14.919313) (xy -24.419313 -15.202763) (xy -24.196607 -15.536066)
        (xy -24.043204 -15.906413) (xy -23.965 -16.29957) (xy -23.965 -16.70043) (xy -24.043204 -17.093587) (xy -24.196607 -17.463934)
        (xy -24.419313 -17.797237) (xy -24.702763 -18.080687) (xy -24.828946 -18.165) (xy -23.741018 -18.165) (xy -23.7 -18.16096)
        (xy -23.658982 -18.165) (xy -23.658981 -18.165) (xy -23.536311 -18.177082) (xy -23.378913 -18.224828) (xy -23.234999 -18.301752)
        (xy -23.235 -9.991019) (xy -23.23904 -9.95) (xy -23.235 -9.908982) (xy -23.222918 -9.786312) (xy -23.175172 -9.628914)
        (xy -23.097636 -9.483855) (xy -22.993291 -9.356709) (xy -22.961421 -9.330554) (xy -21.669442 -8.038574) (xy -21.643291 -8.006709)
        (xy -21.516146 -7.902364) (xy -21.371087 -7.824828) (xy -21.213689 -7.777082) (xy -21.091019 -7.765) (xy -21.091009 -7.765)
        (xy -21.050001 -7.760961) (xy -21.008993 -7.765) (xy -19.835638 -7.765) (xy -19.874463 -7.748918) (xy -20.142252 -7.569987)
        (xy -20.369987 -7.342252) (xy -20.548918 -7.074463) (xy -20.672168 -6.776912) (xy -20.735 -6.461033) (xy -20.735 -6.138967)
        (xy -20.672168 -5.823088) (xy -20.548918 -5.525537) (xy -20.369987 -5.257748) (xy -20.142252 -5.030013) (xy -19.874463 -4.851082)
        (xy -19.576912 -4.727832) (xy -19.261033 -4.665) (xy -18.938967 -4.665) (xy -18.861314 -4.680446) (xy -17.669437 -3.488568)
        (xy -17.643291 -3.456709) (xy -17.611432 -3.430563) (xy -17.61143 -3.430561) (xy -17.516146 -3.352364) (xy -17.371087 -3.274828)
        (xy -17.213689 -3.227082) (xy -17.05 -3.21096) (xy -17.008982 -3.215) (xy -12.591018 -3.215) (xy -12.55 -3.21096)
        (xy -12.508982 -3.215) (xy -12.508981 -3.215) (xy -12.386311 -3.227082) (xy -12.228913 -3.274828) (xy -12.083854 -3.352364)
        (xy -11.956709 -3.456709) (xy -11.930554 -3.488579) (xy -10.722095 -4.697037) (xy -10.561033 -4.665) (xy -10.238967 -4.665)
        (xy -9.923088 -4.727832) (xy -9.625537 -4.851082) (xy -9.357748 -5.030013) (xy -9.130013 -5.257748) (xy -9.034999 -5.399946)
        (xy -9.035 -4.194614) (xy -9.093387 -4.163405) (xy -9.227962 -4.052962) (xy -9.338405 -3.918387) (xy -9.420472 -3.764851)
        (xy -9.471008 -3.598255) (xy -9.488072 -3.425001) (xy -9.488072 -2.174999) (xy -9.471008 -2.001745) (xy -9.420472 -1.835149)
        (xy -9.338405 -1.681613) (xy -9.227962 -1.547038) (xy -9.093387 -1.436595) (xy -8.939851 -1.354528) (xy -8.773255 -1.303992)
        (xy -8.600001 -1.286928) (xy -7.799999 -1.286928) (xy -7.626745 -1.303992) (xy -7.460149 -1.354528) (xy -7.306613 -1.436595)
        (xy -7.172038 -1.547038) (xy -7.061595 -1.681613) (xy -6.979528 -1.835149) (xy -6.928992 -2.001745) (xy -6.911928 -2.174999)
        (xy -6.911928 -3.425001) (xy -6.928992 -3.598255) (xy -6.979528 -3.764851) (xy -7.061595 -3.918387) (xy -7.172038 -4.052962)
        (xy -7.306613 -4.163405) (xy -7.365 -4.194614) (xy -7.365 -6.808982) (xy -7.36096 -6.85) (xy -7.377082 -7.013689)
        (xy -7.424828 -7.171087) (xy -7.502364 -7.316146) (xy -7.580561 -7.41143) (xy -7.580563 -7.411432) (xy -7.606709 -7.443291)
        (xy -7.638568 -7.469437) (xy -9.562401 -9.393268) (xy -9.357748 -9.530013) (xy -9.130013 -9.757748) (xy -8.951082 -10.025537)
        (xy -8.827832 -10.323088) (xy -8.765 -10.638967) (xy -8.765 -10.961033) (xy -5.535 -10.961033) (xy -5.535 -10.638967)
        (xy -5.472168 -10.323088) (xy -5.348918 -10.025537) (xy -5.169987 -9.757748) (xy -4.942252 -9.530013) (xy -4.674463 -9.351082)
        (xy -4.376912 -9.227832) (xy -4.061033 -9.165) (xy -3.738967 -9.165) (xy -3.423088 -9.227832) (xy -3.125537 -9.351082)
        (xy -2.857748 -9.530013) (xy -2.630013 -9.757748) (xy -2.451082 -10.025537) (xy -2.327832 -10.323088) (xy -2.265 -10.638967)
        (xy -2.265 -10.961033) (xy -2.327832 -11.276912) (xy -2.451082 -11.574463) (xy -2.630013 -11.842252) (xy -2.857748 -12.069987)
        (xy -3.125537 -12.248918) (xy -3.423088 -12.372168) (xy -3.738967 -12.435) (xy -4.061033 -12.435) (xy -4.376912 -12.372168)
        (xy -4.674463 -12.248918) (xy -4.942252 -12.069987) (xy -5.169987 -11.842252) (xy -5.348918 -11.574463) (xy -5.472168 -11.276912)
        (xy -5.535 -10.961033) (xy -8.765 -10.961033) (xy -8.827832 -11.276912) (xy -8.951082 -11.574463) (xy -9.130013 -11.842252)
        (xy -9.357748 -12.069987) (xy -9.625537 -12.248918) (xy -9.923088 -12.372168) (xy -10.238967 -12.435) (xy -10.561033 -12.435)
        (xy -10.876912 -12.372168) (xy -11.174463 -12.248918) (xy -11.442252 -12.069987) (xy -11.669987 -11.842252) (xy -11.848918 -11.574463)
        (xy -11.972168 -11.276912) (xy -12.035 -10.961033) (xy -12.035 -10.638967) (xy -11.972168 -10.323088) (xy -11.848918 -10.025537)
        (xy -11.669987 -9.757748) (xy -11.442252 -9.530013) (xy -11.2376 -9.393269) (xy -13.145867 -7.485) (xy -16.254132 -7.485)
        (xy -17.930554 -9.161421) (xy -17.956709 -9.193291) (xy -18.083854 -9.297636) (xy -18.228913 -9.375172) (xy -18.270571 -9.387809)
        (xy -18.057748 -9.530013) (xy -17.830013 -9.757748) (xy -17.651082 -10.025537) (xy -17.527832 -10.323088) (xy -17.465 -10.638967)
        (xy -17.465 -10.961033) (xy -17.527832 -11.276912) (xy -17.651082 -11.574463) (xy -17.830013 -11.842252) (xy -18.057748 -12.069987)
        (xy -18.325537 -12.248918) (xy -18.623088 -12.372168) (xy -18.938967 -12.435) (xy -19.261033 -12.435) (xy -19.576912 -12.372168)
        (xy -19.874463 -12.248918) (xy -20.142252 -12.069987) (xy -20.369987 -11.842252) (xy -20.548918 -11.574463) (xy -20.672168 -11.276912)
        (xy -20.735 -10.961033) (xy -20.735 -10.638967) (xy -20.672168 -10.323088) (xy -20.548918 -10.025537) (xy -20.369987 -9.757748)
        (xy -20.142252 -9.530013) (xy -20.000055 -9.435) (xy -20.704132 -9.435) (xy -21.565 -10.295867) (xy -21.565 -23.338405)
      )
    )
    (filled_polygon
      (pts
        (xy -5.969744 -24.975338) (xy -6.225338 -24.719744) (xy -6.426156 -24.419199) (xy -6.440322 -24.385) (xy -6.658993 -24.385)
        (xy -6.700001 -24.389039) (xy -6.741009 -24.385) (xy -6.741019 -24.385) (xy -6.863689 -24.372918) (xy -7.021087 -24.325172)
        (xy -7.166146 -24.247636) (xy -7.293291 -24.143291) (xy -7.319441 -24.111427) (xy -8.845867 -22.585) (xy -10.158982 -22.585)
        (xy -10.2 -22.58904) (xy -10.241019 -22.585) (xy -10.363689 -22.572918) (xy -10.521087 -22.525172) (xy -10.666146 -22.447636)
        (xy -10.793291 -22.343291) (xy -10.819439 -22.311429) (xy -13.345867 -19.785) (xy -16.654132 -19.785) (xy -16.865 -19.995867)
        (xy -16.865 -21.596111) (xy -16.826185 -21.548815) (xy -16.729494 -21.469463) (xy -16.61918 -21.410498) (xy -16.499482 -21.374188)
        (xy -16.375 -21.361928) (xy -15.825 -21.361928) (xy -15.700518 -21.374188) (xy -15.58082 -21.410498) (xy -15.470506 -21.469463)
        (xy -15.373815 -21.548815) (xy -15.3 -21.638759) (xy -15.226185 -21.548815) (xy -15.129494 -21.469463) (xy -15.01918 -21.410498)
        (xy -14.899482 -21.374188) (xy -14.775 -21.361928) (xy -14.225 -21.361928) (xy -14.100518 -21.374188) (xy -14.1 -21.374345)
        (xy -14.099482 -21.374188) (xy -13.975 -21.361928) (xy -13.425 -21.361928) (xy -13.300518 -21.374188) (xy -13.18082 -21.410498)
        (xy -13.070506 -21.469463) (xy -12.973815 -21.548815) (xy -12.894463 -21.645506) (xy -12.835498 -21.75582) (xy -12.799188 -21.875518)
        (xy -12.786928 -22) (xy -12.786928 -23.336928) (xy -11.45 -23.336928) (xy -11.325518 -23.349188) (xy -11.20582 -23.385498)
        (xy -11.095506 -23.444463) (xy -10.998815 -23.523815) (xy -10.919463 -23.620506) (xy -10.860498 -23.73082) (xy -10.824188 -23.850518)
        (xy -10.811928 -23.975) (xy -10.811928 -24.215) (xy -8.641018 -24.215) (xy -8.6 -24.21096) (xy -8.558982 -24.215)
        (xy -8.558981 -24.215) (xy -8.436311 -24.227082) (xy -8.278913 -24.274828) (xy -8.133854 -24.352364) (xy -8.006709 -24.456709)
        (xy -7.980555 -24.488578) (xy -7.454132 -25.015) (xy -5.910386 -25.015)
      )
    )
    (filled_polygon
      (pts
        (xy -5.956796 -37.906413) (xy -5.803393 -37.536066) (xy -5.580687 -37.202763) (xy -5.297237 -36.919313) (xy -4.963934 -36.696607)
        (xy -4.593587 -36.543204) (xy -4.20043 -36.465) (xy -3.79957 -36.465) (xy -3.406413 -36.543204) (xy -3.036066 -36.696607)
        (xy -2.934999 -36.764138) (xy -2.935 -29.613072) (xy -3.650001 -29.613072) (xy -3.823255 -29.596008) (xy -3.989851 -29.545472)
        (xy -4.143387 -29.463405) (xy -4.277962 -29.352962) (xy -4.388405 -29.218387) (xy -4.470472 -29.064851) (xy -4.521008 -28.898255)
        (xy -4.538072 -28.725001) (xy -4.538072 -27.485) (xy -5.061928 -27.485) (xy -5.061928 -28.725001) (xy -5.078992 -28.898255)
        (xy -5.129528 -29.064851) (xy -5.211595 -29.218387) (xy -5.322038 -29.352962) (xy -5.456613 -29.463405) (xy -5.610149 -29.545472)
        (xy -5.776745 -29.596008) (xy -5.949999 -29.613072) (xy -6.750001 -29.613072) (xy -6.923255 -29.596008) (xy -7.089851 -29.545472)
        (xy -7.243387 -29.463405) (xy -7.377962 -29.352962) (xy -7.488405 -29.218387) (xy -7.565 -29.075088) (xy -7.565 -32.704133)
        (xy -6.938574 -33.330558) (xy -6.906709 -33.356709) (xy -6.802364 -33.483854) (xy -6.724828 -33.628913) (xy -6.70988 -33.678191)
        (xy -6.701745 -33.678992) (xy -6.535149 -33.729528) (xy -6.381613 -33.811595) (xy -6.247038 -33.922038) (xy -6.136595 -34.056613)
        (xy -6.054528 -34.210149) (xy -6.003992 -34.376745) (xy -5.986928 -34.549999) (xy -5.986928 -35.350001) (xy -6.003992 -35.523255)
        (xy -6.054528 -35.689851) (xy -6.136595 -35.843387) (xy -6.247038 -35.977962) (xy -6.381613 -36.088405) (xy -6.535149 -36.170472)
        (xy -6.701745 -36.221008) (xy -6.874999 -36.238072) (xy -8.125001 -36.238072) (xy -8.298255 -36.221008) (xy -8.464851 -36.170472)
        (xy -8.465 -36.170392) (xy -8.465 -36.829608) (xy -8.464851 -36.829528) (xy -8.298255 -36.778992) (xy -8.125001 -36.761928)
        (xy -6.874999 -36.761928) (xy -6.701745 -36.778992) (xy -6.535149 -36.829528) (xy -6.381613 -36.911595) (xy -6.247038 -37.022038)
        (xy -6.136595 -37.156613) (xy -6.054528 -37.310149) (xy -6.003992 -37.476745) (xy -5.986928 -37.649999) (xy -5.986928 -38.057896)
      )
    )
    (filled_polygon
      (pts
        (xy -16.25 -46.41096) (xy -16.208982 -46.415) (xy -15.345867 -46.415) (xy -14.848778 -45.91791) (xy -14.911302 -45.892012)
        (xy -15.260983 -45.658363) (xy -15.558363 -45.360983) (xy -15.792012 -45.011302) (xy -15.952953 -44.622756) (xy -16.035 -44.210279)
        (xy -16.035 -43.789721) (xy -15.952953 -43.377244) (xy -15.792012 -42.988698) (xy -15.558363 -42.639017) (xy -15.300107 -42.380761)
        (xy -16.821426 -40.859441) (xy -16.85329 -40.833291) (xy -16.879438 -40.801429) (xy -16.957636 -40.706145) (xy -17.035172 -40.561086)
        (xy -17.082918 -40.403688) (xy -17.09904 -40.24) (xy -17.094999 -40.198972) (xy -17.094999 -39.828066) (xy -17.206632 -39.753475)
        (xy -17.413475 -39.546632) (xy -17.57599 -39.303411) (xy -17.687932 -39.033158) (xy -17.745 -38.74626) (xy -17.745 -38.45374)
        (xy -17.687932 -38.166842) (xy -17.57599 -37.896589) (xy -17.413475 -37.653368) (xy -17.206632 -37.446525) (xy -17.094999 -37.371935)
        (xy -17.095 -35.651019) (xy -17.09904 -35.61) (xy -17.095 -35.568982) (xy -17.082918 -35.446312) (xy -17.035172 -35.288914)
        (xy -16.957636 -35.143855) (xy -16.853291 -35.016709) (xy -16.821422 -34.990554) (xy -16.269442 -34.438574) (xy -16.243291 -34.406709)
        (xy -16.116146 -34.302364) (xy -15.971087 -34.224828) (xy -15.813689 -34.177082) (xy -15.691019 -34.165) (xy -15.691009 -34.165)
        (xy -15.650001 -34.160961) (xy -15.608993 -34.165) (xy -15.559862 -34.165) (xy -15.520472 -34.035149) (xy -15.438405 -33.881613)
        (xy -15.327962 -33.747038) (xy -15.193387 -33.636595) (xy -15.039851 -33.554528) (xy -14.873255 -33.503992) (xy -14.700001 -33.486928)
        (xy -13.899999 -33.486928) (xy -13.726745 -33.503992) (xy -13.560149 -33.554528) (xy -13.406613 -33.636595) (xy -13.272038 -33.747038)
        (xy -13.161595 -33.881613) (xy -13.079528 -34.035149) (xy -13.028992 -34.201745) (xy -13.011928 -34.374999) (xy -13.011928 -35.625001)
        (xy -13.028992 -35.798255) (xy -13.079528 -35.964851) (xy -13.161595 -36.118387) (xy -13.272038 -36.252962) (xy -13.406613 -36.363405)
        (xy -13.560149 -36.445472) (xy -13.726745 -36.496008) (xy -13.899999 -36.513072) (xy -14.700001 -36.513072) (xy -14.873255 -36.496008)
        (xy -15.039851 -36.445472) (xy -15.193387 -36.363405) (xy -15.327962 -36.252962) (xy -15.425 -36.134721) (xy -15.425 -37.371935)
        (xy -15.313368 -37.446525) (xy -15.106525 -37.653368) (xy -14.99 -37.82776) (xy -14.873475 -37.653368) (xy -14.666632 -37.446525)
        (xy -14.423411 -37.28401) (xy -14.153158 -37.172068) (xy -13.86626 -37.115) (xy -13.57374 -37.115) (xy -13.286842 -37.172068)
        (xy -13.016589 -37.28401) (xy -12.773368 -37.446525) (xy -12.566525 -37.653368) (xy -12.45 -37.82776) (xy -12.333475 -37.653368)
        (xy -12.126632 -37.446525) (xy -12.015 -37.371935) (xy -12.014999 -36.405304) (xy -12.093387 -36.363405) (xy -12.227962 -36.252962)
        (xy -12.338405 -36.118387) (xy -12.420472 -35.964851) (xy -12.471008 -35.798255) (xy -12.488072 -35.625001) (xy -12.488072 -34.374999)
        (xy -12.471008 -34.201745) (xy -12.420472 -34.035149) (xy -12.338405 -33.881613) (xy -12.227962 -33.747038) (xy -12.093387 -33.636595)
        (xy -12.034999 -33.605386) (xy -12.035 -31.941019) (xy -12.03904 -31.9) (xy -12.035 -31.858982) (xy -12.022918 -31.736312)
        (xy -11.975172 -31.578914) (xy -11.897636 -31.433855) (xy -11.793291 -31.306709) (xy -11.761422 -31.280555) (xy -11.234999 -30.754131)
        (xy -11.234999 -30.723353) (xy -11.325518 -30.750812) (xy -11.45 -30.763072) (xy -12.786928 -30.763072) (xy -12.786928 -32.1)
        (xy -12.799188 -32.224482) (xy -12.835498 -32.34418) (xy -12.894463 -32.454494) (xy -12.973815 -32.551185) (xy -13.070506 -32.630537)
        (xy -13.18082 -32.689502) (xy -13.300518 -32.725812) (xy -13.425 -32.738072) (xy -13.975 -32.738072) (xy -14.099482 -32.725812)
        (xy -14.1 -32.725655) (xy -14.100518 -32.725812) (xy -14.225 -32.738072) (xy -14.775 -32.738072) (xy -14.899482 -32.725812)
        (xy -14.9 -32.725655) (xy -14.900518 -32.725812) (xy -15.025 -32.738072) (xy -15.575 -32.738072) (xy -15.699482 -32.725812)
        (xy -15.81918 -32.689502) (xy -15.929494 -32.630537) (xy -16.026185 -32.551185) (xy -16.1 -32.461241) (xy -16.173815 -32.551185)
        (xy -16.270506 -32.630537) (xy -16.38082 -32.689502) (xy -16.500518 -32.725812) (xy -16.625 -32.738072) (xy -17.175 -32.738072)
        (xy -17.299482 -32.725812) (xy -17.3 -32.725655) (xy -17.300518 -32.725812) (xy -17.425 -32.738072) (xy -17.665 -32.738072)
        (xy -17.665 -33.008982) (xy -17.66096 -33.05) (xy -17.677082 -33.213689) (xy -17.724828 -33.371087) (xy -17.802364 -33.516146)
        (xy -17.880561 -33.611429) (xy -17.906709 -33.643291) (xy -17.938573 -33.669441) (xy -20.465 -36.195867) (xy -20.465 -43.904133)
        (xy -19.904132 -44.465) (xy -18.894614 -44.465) (xy -18.863405 -44.406613) (xy -18.752962 -44.272038) (xy -18.618387 -44.161595)
        (xy -18.464851 -44.079528) (xy -18.298255 -44.028992) (xy -18.125001 -44.011928) (xy -16.874999 -44.011928) (xy -16.701745 -44.028992)
        (xy -16.535149 -44.079528) (xy -16.381613 -44.161595) (xy -16.247038 -44.272038) (xy -16.136595 -44.406613) (xy -16.054528 -44.560149)
        (xy -16.003992 -44.726745) (xy -15.986928 -44.899999) (xy -15.986928 -45.700001) (xy -16.003992 -45.873255) (xy -16.054528 -46.039851)
        (xy -16.136595 -46.193387) (xy -16.247038 -46.327962) (xy -16.353094 -46.415) (xy -16.291019 -46.415)
      )
    )
    (filled_polygon
      (pts
        (xy -17.527 -68.877) (xy -18 -68.877) (xy -18.024776 -68.87456) (xy -18.048601 -68.867333) (xy -18.070557 -68.855597)
        (xy -18.089803 -68.839803) (xy -18.105597 -68.820557) (xy -18.117333 -68.798601) (xy -18.12456 -68.774776) (xy -18.127 -68.75)
        (xy -18.127 -68.35) (xy -18.12456 -68.325224) (xy -18.117333 -68.301399) (xy -18.105597 -68.279443) (xy -18.089803 -68.260197)
        (xy -18.070557 -68.244403) (xy -18.048601 -68.232667) (xy -18.024776 -68.22544) (xy -18 -68.223) (xy -17.527 -68.223)
        (xy -17.527 -67.75) (xy -17.52456 -67.725224) (xy -17.517333 -67.701399) (xy -17.505597 -67.679443) (xy -17.489803 -67.660197)
        (xy -17.470557 -67.644403) (xy -17.448601 -67.632667) (xy -17.424776 -67.62544) (xy -17.4 -67.623) (xy -17 -67.623)
        (xy -16.975224 -67.62544) (xy -16.951399 -67.632667) (xy -16.929443 -67.644403) (xy -16.910197 -67.660197) (xy -16.894403 -67.679443)
        (xy -16.882667 -67.701399) (xy -16.87544 -67.725224) (xy -16.873 -67.75) (xy -16.873 -68.223) (xy -16.4 -68.223)
        (xy -16.375224 -68.22544) (xy -16.351399 -68.232667) (xy -16.329443 -68.244403) (xy -16.310197 -68.260197) (xy -16.294403 -68.279443)
        (xy -16.282667 -68.301399) (xy -16.27544 -68.325224) (xy -16.273 -68.35) (xy -16.273 -68.75) (xy -16.27544 -68.774776)
        (xy -16.282667 -68.798601) (xy -16.294403 -68.820557) (xy -16.310197 -68.839803) (xy -16.329443 -68.855597) (xy -16.351399 -68.867333)
        (xy -16.375224 -68.87456) (xy -16.4 -68.877) (xy -16.873 -68.877) (xy -16.873 -69.315) (xy -3.115223 -69.315)
        (xy -3.274125 -69.208825) (xy -3.508825 -68.974125) (xy -3.693228 -68.698147) (xy -3.820246 -68.391496) (xy -3.885 -68.065958)
        (xy -3.885 -67.734042) (xy -3.820246 -67.408504) (xy -3.693228 -67.101853) (xy -3.508825 -66.825875) (xy -3.274125 -66.591175)
        (xy -2.998147 -66.406772) (xy -2.691496 -66.279754) (xy -2.365958 -66.215) (xy -2.034042 -66.215) (xy -1.708504 -66.279754)
        (xy -1.401853 -66.406772) (xy -1.125875 -66.591175) (xy -0.891175 -66.825875) (xy -0.706772 -67.101853) (xy -0.685 -67.154416)
        (xy -0.685 -46.877) (xy -1.662583 -46.877) (xy -1.774999 -46.888072) (xy -3.025001 -46.888072) (xy -3.137417 -46.877)
        (xy -3.7 -46.877) (xy -3.724776 -46.87456) (xy -3.748601 -46.867333) (xy -3.770557 -46.855597) (xy -3.773017 -46.853578)
        (xy -3.888981 -46.865) (xy -3.888982 -46.865) (xy -3.93 -46.86904) (xy -3.971018 -46.865) (xy -4.82834 -46.865)
        (xy -4.966377 -46.978284) (xy -5.163553 -47.083676) (xy -5.377501 -47.148577) (xy -5.544248 -47.165) (xy -7.055752 -47.165)
        (xy -7.222499 -47.148577) (xy -7.436447 -47.083676) (xy -7.633623 -46.978284) (xy -7.665 -46.952533) (xy -7.665 -48.104133)
        (xy -5.838573 -49.930559) (xy -5.806709 -49.956709) (xy -5.702364 -50.083854) (xy -5.624828 -50.228913) (xy -5.577082 -50.386311)
        (xy -5.565 -50.508981) (xy -5.565 -50.508991) (xy -5.560961 -50.549999) (xy -5.565 -50.591007) (xy -5.565 -50.650378)
        (xy -5.454014 -50.559294) (xy -5.196034 -50.421401) (xy -4.916111 -50.336487) (xy -4.69795 -50.315) (xy -4.30205 -50.315)
        (xy -4.083889 -50.336487) (xy -3.803966 -50.421401) (xy -3.545986 -50.559294) (xy -3.319866 -50.744866) (xy -3.235 -50.848276)
        (xy -3.235 -49.959862) (xy -3.364851 -49.920472) (xy -3.518387 -49.838405) (xy -3.652962 -49.727962) (xy -3.763405 -49.593387)
        (xy -3.845472 -49.439851) (xy -3.896008 -49.273255) (xy -3.913072 -49.100001) (xy -3.913072 -48.299999) (xy -3.896008 -48.126745)
        (xy -3.845472 -47.960149) (xy -3.763405 -47.806613) (xy -3.652962 -47.672038) (xy -3.518387 -47.561595) (xy -3.364851 -47.479528)
        (xy -3.198255 -47.428992) (xy -3.025001 -47.411928) (xy -1.774999 -47.411928) (xy -1.601745 -47.428992) (xy -1.435149 -47.479528)
        (xy -1.281613 -47.561595) (xy -1.147038 -47.672038) (xy -1.036595 -47.806613) (xy -0.954528 -47.960149) (xy -0.903992 -48.126745)
        (xy -0.886928 -48.299999) (xy -0.886928 -49.100001) (xy -0.903992 -49.273255) (xy -0.954528 -49.439851) (xy -1.036595 -49.593387)
        (xy -1.147038 -49.727962) (xy -1.281613 -49.838405) (xy -1.435149 -49.920472) (xy -1.565 -49.959862) (xy -1.565 -53.708993)
        (xy -1.560961 -53.750001) (xy -1.565 -53.791009) (xy -1.565 -53.791019) (xy -1.577082 -53.913689) (xy -1.624828 -54.071087)
        (xy -1.702364 -54.216146) (xy -1.806709 -54.343291) (xy -1.838579 -54.369446) (xy -2.330554 -54.861421) (xy -2.356709 -54.893291)
        (xy -2.483854 -54.997636) (xy -2.628913 -55.075172) (xy -2.786311 -55.122918) (xy -2.908981 -55.135) (xy -2.908982 -55.135)
        (xy -2.95 -55.13904) (xy -2.991018 -55.135) (xy -3.139207 -55.135) (xy -3.319866 -55.355134) (xy -3.545986 -55.540706)
        (xy -3.803966 -55.678599) (xy -4.083889 -55.763513) (xy -4.30205 -55.785) (xy -4.69795 -55.785) (xy -4.916111 -55.763513)
        (xy -5.196034 -55.678599) (xy -5.454014 -55.540706) (xy -5.680134 -55.355134) (xy -5.860793 -55.135) (xy -6.508982 -55.135)
        (xy -6.55 -55.13904) (xy -6.591019 -55.135) (xy -6.713689 -55.122918) (xy -6.871087 -55.075172) (xy -7.016146 -54.997636)
        (xy -7.143291 -54.893291) (xy -7.169437 -54.861431) (xy -7.761427 -54.269441) (xy -7.79329 -54.243291) (xy -7.819438 -54.211429)
        (xy -7.897636 -54.116145) (xy -7.975172 -53.971086) (xy -8.022918 -53.813688) (xy -8.03904 -53.65) (xy -8.034999 -53.608972)
        (xy -8.035 -51.395868) (xy -9.795753 -49.635114) (xy -9.765 -49.789721) (xy -9.765 -50.210279) (xy -9.847047 -50.622756)
        (xy -10.007988 -51.011302) (xy -10.241637 -51.360983) (xy -10.539017 -51.658363) (xy -10.888698 -51.892012) (xy -11.065 -51.965039)
        (xy -11.065 -53.154133) (xy -8.938567 -55.280564) (xy -8.906709 -55.306709) (xy -8.802364 -55.433854) (xy -8.724828 -55.578913)
        (xy -8.677082 -55.736311) (xy -8.665 -55.858981) (xy -8.665 -55.858982) (xy -8.66096 -55.9) (xy -8.665 -55.941018)
        (xy -8.665 -58.554133) (xy -6.938572 -60.28056) (xy -6.906709 -60.306709) (xy -6.802364 -60.433854) (xy -6.724828 -60.578913)
        (xy -6.677082 -60.736311) (xy -6.665 -60.858981) (xy -6.665 -60.858982) (xy -6.66096 -60.899999) (xy -6.665 -60.941018)
        (xy -6.665 -63.751439) (xy -6.583434 -63.785225) (xy -6.266509 -63.996987) (xy -5.996987 -64.266509) (xy -5.785225 -64.583434)
        (xy -5.639361 -64.935581) (xy -5.565 -65.309419) (xy -5.565 -65.690581) (xy -5.639361 -66.064419) (xy -5.785225 -66.416566)
        (xy -5.996987 -66.733491) (xy -6.266509 -67.003013) (xy -6.583434 -67.214775) (xy -6.935581 -67.360639) (xy -7.309419 -67.435)
        (xy -7.690581 -67.435) (xy -8.064419 -67.360639) (xy -8.416566 -67.214775) (xy -8.733491 -67.003013) (xy -9.003013 -66.733491)
        (xy -9.214775 -66.416566) (xy -9.360639 -66.064419) (xy -9.435 -65.690581) (xy -9.435 -65.309419) (xy -9.360639 -64.935581)
        (xy -9.214775 -64.583434) (xy -9.003013 -64.266509) (xy -8.733491 -63.996987) (xy -8.416566 -63.785225) (xy -8.334999 -63.751439)
        (xy -8.335 -61.245868) (xy -10.061426 -59.519441) (xy -10.09329 -59.493291) (xy -10.119438 -59.461429) (xy -10.197636 -59.366145)
        (xy -10.275172 -59.221086) (xy -10.322918 -59.063688) (xy -10.33904 -58.9) (xy -10.334999 -58.858972) (xy -10.335 -56.245869)
        (xy -12.461426 -54.119441) (xy -12.49329 -54.093291) (xy -12.519438 -54.061429) (xy -12.597636 -53.966145) (xy -12.675172 -53.821086)
        (xy -12.722918 -53.663688) (xy -12.73904 -53.5) (xy -12.734999 -53.458972) (xy -12.734999 -51.965039) (xy -12.911302 -51.892012)
        (xy -13.260983 -51.658363) (xy -13.558363 -51.360983) (xy -13.792012 -51.011302) (xy -13.952953 -50.622756) (xy -14.035 -50.210279)
        (xy -14.035 -50.115868) (xy -14.480555 -50.561422) (xy -14.506709 -50.593291) (xy -14.633854 -50.697636) (xy -14.778913 -50.775172)
        (xy -14.817041 -50.786738) (xy -14.804528 -50.810149) (xy -14.753992 -50.976745) (xy -14.736928 -51.149999) (xy -14.736928 -51.950001)
        (xy -14.753992 -52.123255) (xy -14.804528 -52.289851) (xy -14.886595 -52.443387) (xy -14.997038 -52.577962) (xy -15.131613 -52.688405)
        (xy -15.285149 -52.770472) (xy -15.415 -52.809862) (xy -15.415 -54.495654) (xy -15.260983 -54.341637) (xy -14.911302 -54.107988)
        (xy -14.522756 -53.947047) (xy -14.110279 -53.865) (xy -13.689721 -53.865) (xy -13.277244 -53.947047) (xy -12.888698 -54.107988)
        (xy -12.539017 -54.341637) (xy -12.241637 -54.639017) (xy -12.007988 -54.988698) (xy -11.847047 -55.377244) (xy -11.765 -55.789721)
        (xy -11.765 -56.210279) (xy -11.847047 -56.622756) (xy -12.007988 -57.011302) (xy -12.241637 -57.360983) (xy -12.539017 -57.658363)
        (xy -12.888698 -57.892012) (xy -13.277244 -58.052953) (xy -13.689721 -58.135) (xy -14.110279 -58.135) (xy -14.522756 -58.052953)
        (xy -14.911302 -57.892012) (xy -15.260983 -57.658363) (xy -15.558363 -57.360983) (xy -15.792012 -57.011302) (xy -15.870956 -56.820713)
        (xy -16.021087 -56.775172) (xy -16.166146 -56.697636) (xy -16.293291 -56.593291) (xy -16.319446 -56.561421) (xy -16.811426 -56.069441)
        (xy -16.84329 -56.043291) (xy -16.91248 -55.958982) (xy -16.947636 -55.916145) (xy -17.025172 -55.771086) (xy -17.072918 -55.613688)
        (xy -17.08904 -55.45) (xy -17.084999 -55.408972) (xy -17.085 -52.809862) (xy -17.214851 -52.770472) (xy -17.368387 -52.688405)
        (xy -17.502962 -52.577962) (xy -17.613405 -52.443387) (xy -17.644614 -52.385) (xy -19.054132 -52.385) (xy -19.380555 -52.711422)
        (xy -19.406709 -52.743291) (xy -19.533854 -52.847636) (xy -19.678913 -52.925172) (xy -19.836311 -52.972918) (xy -19.958981 -52.985)
        (xy -19.958982 -52.985) (xy -20 -52.98904) (xy -20.041018 -52.985) (xy -20.485532 -52.985) (xy -20.498815 -53.001185)
        (xy -20.595506 -53.080537) (xy -20.70582 -53.139502) (xy -20.825518 -53.175812) (xy -20.95 -53.188072) (xy -21.85 -53.188072)
        (xy -21.974482 -53.175812) (xy -22.09418 -53.139502) (xy -22.204494 -53.080537) (xy -22.301185 -53.001185) (xy -22.380537 -52.904494)
        (xy -22.439502 -52.79418) (xy -22.475812 -52.674482) (xy -22.488072 -52.55) (xy -22.488072 -52.038095) (xy -22.498815 -52.051185)
        (xy -22.595506 -52.130537) (xy -22.70582 -52.189502) (xy -22.825518 -52.225812) (xy -22.95 -52.238072) (xy -23.85 -52.238072)
        (xy -23.974482 -52.225812) (xy -24.09418 -52.189502) (xy -24.204494 -52.130537) (xy -24.301185 -52.051185) (xy -24.380537 -51.954494)
        (xy -24.439502 -51.84418) (xy -24.475812 -51.724482) (xy -24.488072 -51.6) (xy -24.488072 -50.8) (xy -24.475812 -50.675518)
        (xy -24.439502 -50.55582) (xy -24.380537 -50.445506) (xy -24.301185 -50.348815) (xy -24.234999 -50.294498) (xy -24.234999 -49.591028)
        (xy -24.23904 -49.55) (xy -24.222918 -49.386312) (xy -24.175172 -49.228914) (xy -24.113582 -49.113688) (xy -24.097635 -49.083854)
        (xy -24.085 -49.068458) (xy -24.085 -48.794614) (xy -24.143387 -48.763405) (xy -24.277962 -48.652962) (xy -24.388405 -48.518387)
        (xy -24.470472 -48.364851) (xy -24.521008 -48.198255) (xy -24.538072 -48.025001) (xy -24.538072 -46.774999) (xy -24.521008 -46.601745)
        (xy -24.470472 -46.435149) (xy -24.388405 -46.281613) (xy -24.277962 -46.147038) (xy -24.143387 -46.036595) (xy -24.084999 -46.005386)
        (xy -24.084999 -44.71438) (xy -24.207988 -45.011302) (xy -24.441637 -45.360983) (xy -24.739017 -45.658363) (xy -25.088698 -45.892012)
        (xy -25.477244 -46.052953) (xy -25.889721 -46.135) (xy -26.310279 -46.135) (xy -26.722756 -46.052953) (xy -27.111302 -45.892012)
        (xy -27.365 -45.722497) (xy -27.365 -54.277503) (xy -27.111302 -54.107988) (xy -26.722756 -53.947047) (xy -26.310279 -53.865)
        (xy -25.889721 -53.865) (xy -25.477244 -53.947047) (xy -25.088698 -54.107988) (xy -24.739017 -54.341637) (xy -24.441637 -54.639017)
        (xy -24.207988 -54.988698) (xy -24.047047 -55.377244) (xy -23.965 -55.789721) (xy -23.965 -56.210279) (xy -24.047047 -56.622756)
        (xy -24.207988 -57.011302) (xy -24.441637 -57.360983) (xy -24.739017 -57.658363) (xy -25.088698 -57.892012) (xy -25.265 -57.965039)
        (xy -25.265 -58.154132) (xy -24.754132 -58.665) (xy -14.641018 -58.665) (xy -14.6 -58.66096) (xy -14.558982 -58.665)
        (xy -14.558981 -58.665) (xy -14.436311 -58.677082) (xy -14.278913 -58.724828) (xy -14.133854 -58.802364) (xy -14.006709 -58.906709)
        (xy -13.980554 -58.938579) (xy -11.938572 -60.98056) (xy -11.906709 -61.006709) (xy -11.802364 -61.133854) (xy -11.724828 -61.278913)
        (xy -11.677082 -61.436311) (xy -11.665 -61.558981) (xy -11.665 -61.558991) (xy -11.660961 -61.599999) (xy -11.665 -61.641007)
        (xy -11.665 -63.561928) (xy -11.2 -63.561928) (xy -11.075518 -63.574188) (xy -10.95582 -63.610498) (xy -10.845506 -63.669463)
        (xy -10.748815 -63.748815) (xy -10.669463 -63.845506) (xy -10.610498 -63.95582) (xy -10.574188 -64.075518) (xy -10.561928 -64.2)
        (xy -10.561928 -66.8) (xy -10.574188 -66.924482) (xy -10.610498 -67.04418) (xy -10.669463 -67.154494) (xy -10.748815 -67.251185)
        (xy -10.845506 -67.330537) (xy -10.95582 -67.389502) (xy -11.075518 -67.425812) (xy -11.2 -67.438072) (xy -13.8 -67.438072)
        (xy -13.924482 -67.425812) (xy -14.04418 -67.389502) (xy -14.154494 -67.330537) (xy -14.251185 -67.251185) (xy -14.330537 -67.154494)
        (xy -14.389502 -67.04418) (xy -14.425812 -66.924482) (xy -14.438072 -66.8) (xy -14.438072 -64.2) (xy -14.425812 -64.075518)
        (xy -14.389502 -63.95582) (xy -14.330537 -63.845506) (xy -14.251185 -63.748815) (xy -14.154494 -63.669463) (xy -14.04418 -63.610498)
        (xy -13.924482 -63.574188) (xy -13.8 -63.561928) (xy -13.334999 -63.561928) (xy -13.335 -61.945868) (xy -14.945867 -60.335)
        (xy -25.058982 -60.335) (xy -25.1 -60.33904) (xy -25.141018 -60.335) (xy -25.141019 -60.335) (xy -25.263689 -60.322918)
        (xy -25.421087 -60.275172) (xy -25.566146 -60.197636) (xy -25.693291 -60.093291) (xy -25.719437 -60.061432) (xy -26.661426 -59.119441)
        (xy -26.69329 -59.093291) (xy -26.774093 -58.994832) (xy -26.797636 -58.966145) (xy -26.875172 -58.821086) (xy -26.922918 -58.663688)
        (xy -26.93904 -58.5) (xy -26.934999 -58.458972) (xy -26.934999 -57.965039) (xy -27.111302 -57.892012) (xy -27.365 -57.722497)
        (xy -27.365 -60.004133) (xy -26.254131 -61.115) (xy -18.541018 -61.115) (xy -18.5 -61.11096) (xy -18.458982 -61.115)
        (xy -18.458981 -61.115) (xy -18.336311 -61.127082) (xy -18.178913 -61.174828) (xy -18.033854 -61.252364) (xy -17.906709 -61.356709)
        (xy -17.880555 -61.388578) (xy -16.938567 -62.330564) (xy -16.906709 -62.356709) (xy -16.802364 -62.483854) (xy -16.724828 -62.628913)
        (xy -16.677082 -62.786311) (xy -16.665 -62.908981) (xy -16.665 -62.908982) (xy -16.66096 -62.95) (xy -16.665 -62.991018)
        (xy -16.665 -63.751439) (xy -16.583434 -63.785225) (xy -16.266509 -63.996987) (xy -15.996987 -64.266509) (xy -15.785225 -64.583434)
        (xy -15.639361 -64.935581) (xy -15.565 -65.309419) (xy -15.565 -65.690581) (xy -15.639361 -66.064419) (xy -15.785225 -66.416566)
        (xy -15.996987 -66.733491) (xy -16.266509 -67.003013) (xy -16.583434 -67.214775) (xy -16.935581 -67.360639) (xy -17.309419 -67.435)
        (xy -17.690581 -67.435) (xy -18.064419 -67.360639) (xy -18.416566 -67.214775) (xy -18.733491 -67.003013) (xy -19.003013 -66.733491)
        (xy -19.214775 -66.416566) (xy -19.360639 -66.064419) (xy -19.435 -65.690581) (xy -19.435 -65.309419) (xy -19.360639 -64.935581)
        (xy -19.214775 -64.583434) (xy -19.003013 -64.266509) (xy -18.733491 -63.996987) (xy -18.416566 -63.785225) (xy -18.335 -63.751439)
        (xy -18.335 -63.295869) (xy -18.845868 -62.785) (xy -26.558982 -62.785) (xy -26.6 -62.78904) (xy -26.641018 -62.785)
        (xy -26.641019 -62.785) (xy -26.763689 -62.772918) (xy -26.921087 -62.725172) (xy -27.066146 -62.647636) (xy -27.193291 -62.543291)
        (xy -27.219437 -62.511432) (xy -28.265 -61.465868) (xy -28.265 -62.704133) (xy -26.354131 -64.615) (xy -24.438072 -64.615)
        (xy -24.438072 -64.2) (xy -24.425812 -64.075518) (xy -24.389502 -63.95582) (xy -24.330537 -63.845506) (xy -24.251185 -63.748815)
        (xy -24.154494 -63.669463) (xy -24.04418 -63.610498) (xy -23.924482 -63.574188) (xy -23.8 -63.561928) (xy -21.2 -63.561928)
        (xy -21.075518 -63.574188) (xy -20.95582 -63.610498) (xy -20.845506 -63.669463) (xy -20.748815 -63.748815) (xy -20.669463 -63.845506)
        (xy -20.610498 -63.95582) (xy -20.574188 -64.075518) (xy -20.561928 -64.2) (xy -20.561928 -66.8) (xy -20.574188 -66.924482)
        (xy -20.610498 -67.04418) (xy -20.669463 -67.154494) (xy -20.748815 -67.251185) (xy -20.845506 -67.330537) (xy -20.95582 -67.389502)
        (xy -21.075518 -67.425812) (xy -21.2 -67.438072) (xy -23.8 -67.438072) (xy -23.924482 -67.425812) (xy -24.04418 -67.389502)
        (xy -24.154494 -67.330537) (xy -24.251185 -67.251185) (xy -24.330537 -67.154494) (xy -24.389502 -67.04418) (xy -24.425812 -66.924482)
        (xy -24.438072 -66.8) (xy -24.438072 -66.285) (xy -26.658982 -66.285) (xy -26.7 -66.28904) (xy -26.741018 -66.285)
        (xy -26.741019 -66.285) (xy -26.863689 -66.272918) (xy -27.021087 -66.225172) (xy -27.166146 -66.147636) (xy -27.293291 -66.043291)
        (xy -27.319437 -66.011432) (xy -29.315 -64.015867) (xy -29.315 -67.154416) (xy -29.293228 -67.101853) (xy -29.108825 -66.825875)
        (xy -28.874125 -66.591175) (xy -28.598147 -66.406772) (xy -28.291496 -66.279754) (xy -27.965958 -66.215) (xy -27.634042 -66.215)
        (xy -27.308504 -66.279754) (xy -27.001853 -66.406772) (xy -26.725875 -66.591175) (xy -26.491175 -66.825875) (xy -26.306772 -67.101853)
        (xy -26.179754 -67.408504) (xy -26.115 -67.734042) (xy -26.115 -68.065958) (xy -26.179754 -68.391496) (xy -26.306772 -68.698147)
        (xy -26.475055 -68.95) (xy -24.127 -68.95) (xy -24.127 -68.55) (xy -24.12456 -68.525224) (xy -24.117333 -68.501399)
        (xy -24.105597 -68.479443) (xy -24.089803 -68.460197) (xy -24.070557 -68.444403) (xy -24.048601 -68.432667) (xy -24.024776 -68.42544)
        (xy -24 -68.423) (xy -21.6 -68.423) (xy -21.575224 -68.42544) (xy -21.551399 -68.432667) (xy -21.529443 -68.444403)
        (xy -21.510197 -68.460197) (xy -21.494403 -68.479443) (xy -21.482667 -68.501399) (xy -21.47544 -68.525224) (xy -21.473 -68.55)
        (xy -21.473 -68.95) (xy -21.47544 -68.974776) (xy -21.482667 -68.998601) (xy -21.494403 -69.020557) (xy -21.510197 -69.039803)
        (xy -21.529443 -69.055597) (xy -21.551399 -69.067333) (xy -21.575224 -69.07456) (xy -21.6 -69.077) (xy -24 -69.077)
        (xy -24.024776 -69.07456) (xy -24.048601 -69.067333) (xy -24.070557 -69.055597) (xy -24.089803 -69.039803) (xy -24.105597 -69.020557)
        (xy -24.117333 -68.998601) (xy -24.12456 -68.974776) (xy -24.127 -68.95) (xy -26.475055 -68.95) (xy -26.491175 -68.974125)
        (xy -26.725875 -69.208825) (xy -26.884777 -69.315) (xy -17.527 -69.315)
      )
    )
  )
  (zone (net 0) (net_name "") (layer B.Cu) (tstamp 0) (hatch edge 0.508)
    (connect_pads (clearance 0.508))
    (min_thickness 0.254)
    (keepout (tracks allowed) (vias allowed) (copperpour not_allowed))
    (fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
    (polygon
      (pts
        (xy -21.6 -68.55) (xy -24 -68.55) (xy -24 -68.95) (xy -21.6 -68.95)
      )
    )
  )
  (zone (net 0) (net_name "") (layer B.Cu) (tstamp 0) (hatch edge 0.508)
    (connect_pads (clearance 0.508))
    (min_thickness 0.254)
    (keepout (tracks allowed) (vias allowed) (copperpour not_allowed))
    (fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
    (polygon
      (pts
        (xy -17 -68.75) (xy -16.4 -68.75) (xy -16.4 -68.35) (xy -17.4 -68.35) (xy -17.4 -69.35)
        (xy -17 -69.35)
      )
    )
  )
  (zone (net 0) (net_name "") (layer B.Cu) (tstamp 0) (hatch edge 0.508)
    (connect_pads (clearance 0.508))
    (min_thickness 0.254)
    (keepout (tracks allowed) (vias allowed) (copperpour not_allowed))
    (fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
    (polygon
      (pts
        (xy -17 -67.75) (xy -17.4 -67.75) (xy -17.4 -68.35) (xy -18 -68.35) (xy -18 -68.75)
        (xy -17 -68.75)
      )
    )
  )
  (zone (net 0) (net_name "") (layer B.Cu) (tstamp 0) (hatch edge 0.508)
    (connect_pads yes (clearance 0.508))
    (min_thickness 0.254)
    (keepout (tracks allowed) (vias allowed) (copperpour not_allowed))
    (fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
    (polygon
      (pts
        (xy 0.1 -40.75) (xy -3.7 -40.75) (xy -3.7 -46.75) (xy 0.1 -46.75)
      )
    )
  )
)