bond_style morse command¶
bond_style morse/omp command¶
Syntax¶
bond_style morse
Examples¶
bond_style morse
bond_coeff 5 1.0 2.0 1.2
Description¶
The morse bond style uses the potential
![_images/bond_morse.jpg](_images/bond_morse.jpg)
where r0 is the equilibrium bond distance, alpha is a stiffness parameter, and D determines the depth of the potential well.
The following coefficients must be defined for each bond type via the bond_coeff command as in the example above, or in the data file or restart files read by the read_data or read_restart commands:
- D (energy)
- alpha (inverse distance)
- r0 (distance)
Styles with a cuda, gpu, intel, kk, omp, or opt suffix are functionally the same as the corresponding style without the suffix. They have been optimized to run faster, depending on your available hardware, as discussed in Section_accelerate of the manual. The accelerated styles take the same arguments and should produce the same results, except for round-off and precision issues.
These accelerated styles are part of the USER-CUDA, GPU, USER-INTEL, KOKKOS, USER-OMP and OPT packages, respectively. They are only enabled if LAMMPS was built with those packages. See the Making LAMMPS section for more info.
You can specify the accelerated styles explicitly in your input script by including their suffix, or you can use the -suffix command-line switch when you invoke LAMMPS, or you can use the suffix command in your input script.
See Section_accelerate of the manual for more instructions on how to use the accelerated styles effectively.
Restrictions¶
This bond style can only be used if LAMMPS was built with the MOLECULE package (which it is by default). See the Making LAMMPS section for more info on packages.