compute event/displace command¶
Syntax¶
compute ID group-ID event/displace threshold
- ID, group-ID are documented in compute command
- event/displace = style name of this compute command
- threshold = minimum distance anyparticle must move to trigger an event (distance units)
Examples¶
compute 1 all event/displace 0.5
Description¶
Define a computation that flags an “event” if any particle in the group has moved a distance greater than the specified threshold distance when compared to a previously stored reference state (i.e. the previous event). This compute is typically used in conjunction with the prd and tad commands, to detect if a transition to a new minimum energy basin has occurred.
This value calculated by the compute is equal to 0 if no particle has moved far enough, and equal to 1 if one or more particles have moved further than the threshold distance.
Note
If the system is undergoing significant center-of-mass motion, due to thermal motion, an external force, or an initial net momentum, then this compute will not be able to distinguish that motion from local atom displacements and may generate “false postives.”
Output info:
This compute calculates a global scalar (the flag). This value can be used by any command that uses a global scalar value from a compute as input. See Section_howto 15 for an overview of LAMMPS output options.
The scalar value calculated by this compute is “intensive”. The scalar value will be a 0 or 1 as explained above.
Restrictions¶
This command can only be used if LAMMPS was built with the REPLICA package. See the Making LAMMPS section for more info on packages.