fix vector command¶
Syntax¶
fix ID group-ID vector Nevery value1 value2 ...
- ID, group-ID are documented in fix command
- vector = style name of this fix command
- Nevery = use input values every this many timesteps
- one or more input values can be listed
- value = c_ID, c_ID[N], f_ID, f_ID[N], v_name
c_ID = global scalar calculated by a compute with ID
c_ID[I] = Ith component of global vector calculated by a compute with ID
f_ID = global scalar calculated by a fix with ID
f_ID[I] = Ith component of global vector calculated by a fix with ID
v_name = global value calculated by an equal-style variable with name
Examples¶
fix 1 all vector 100 c_myTemp
fix 1 all vector 5 c_myTemp v_integral
Description¶
Use one or more global values as inputs every few timesteps, and simply store them. For a single specified value, the values are stored as a global vector of growing length. For multiple specified values, they are stored as rows in a global array, whose number of rows is growing. The resulting vector or array can be used by other output commands.
One way to to use this command is to accumulate a vector that is time-integrated using the variable trap() function. For example the velocity auto-correlation function (VACF) can be time-integrated, to yield a diffusion coefficient, as follows:
compute 2 all vacf
fix 5 all vector 1 c_2[4]
variable diff equal dt*trap(f_5)
thermo_style custom step v_diff
The group specified with this command is ignored. However, note that specified values may represent calculations performed by computes and fixes which store their own “group” definitions.
Each listed value can be the result of a compute or fix or the evaluation of an equal-style variable. In each case, the compute, fix, or variable must produce a global quantity, not a per-atom or local quantity. And the global quantity must be a scalar, not a vector or array.
Computes that produce global quantities are those which do not have the word atom in their style name. Only a few fixes produce global quantities. See the doc pages for individual fixes for info on which ones produce such values. Variables of style equal are the only ones that can be used with this fix. Variables of style atom cannot be used, since they produce per-atom values.
The Nevery argument specifies on what timesteps the input values will be used in order to be stored. Only timesteps that are a multiple of Nevery, including timestep 0, will contribute values.
Note that if you perform multiple runs, using the “pre no” option of the run command to avoid initialization on subsequent runs, then you need to use the stop keyword with the first run command with a timestep value that encompasses all the runs. This is so that the vector or array stored by this fix can be allocated to a sufficient size.
If a value begins with “c_”, a compute ID must follow which has been previously defined in the input script. If no bracketed term is appended, the global scalar calculated by the compute is used. If a bracketed term is appended, the Ith element of the global vector calculated by the compute is used.
Note that there is a compute reduce command which can sum per-atom quantities into a global scalar or vector which can thus be accessed by fix vector. Or it can be a compute defined not in your input script, but by thermodynamic output or other fixes such as fix nvt or fix temp/rescale. See the doc pages for these commands which give the IDs of these computes. Users can also write code for their own compute styles and add them to LAMMPS.
If a value begins with “f_”, a fix ID must follow which has been previously defined in the input script. If no bracketed term is appended, the global scalar calculated by the fix is used. If a bracketed term is appended, the Ith element of the global vector calculated by the fix is used.
Note that some fixes only produce their values on certain timesteps, which must be compatible with Nevery, else an error will result. Users can also write code for their own fix styles and add them to LAMMPS.
If a value begins with “v_”, a variable name must follow which has been previously defined in the input script. Only equal-style variables can be referenced. See the variable command for details. Note that variables of style equal define a formula which can reference individual atom properties or thermodynamic keywords, or they can invoke other computes, fixes, or variables when they are evaluated, so this is a very general means of specifying quantities to be stored by fix vector.
Restart, fix_modify, output, run start/stop, minimize info¶
No information about this fix is written to binary restart files. None of the fix_modify options are relevant to this fix.
This fix produces a global vector or global array which can be accessed by various output commands. The values can only be accessed on timesteps that are multiples of Nevery.
A vector is produced if only a single input value is specified. An array is produced if multiple input values are specified. The length of the vector or the number of rows in the array grows by 1 every Nevery timesteps.
If the fix prouduces a vector, then the entire vector will be either “intensive” or “extensive”, depending on whether the values stored in the vector are “intensive” or “extensive”. If the fix produces an array, then all elements in the array must be the same, either “intensive” or “extensive”. If a compute or fix provides the value stored, then the compute or fix determines whether the value is intensive or extensive; see the doc page for that compute or fix for further info. Values produced by a variable are treated as intensive.
This fix can allocate storage for stored values accumulated over multiple runs, using the start and stop keywords of the run command. See the run command for details of how to do this. If using the run pre no command option, this is required to allow the fix to allocate sufficient storage for stored values.
This fix is not invoked during energy minimization.
Restrictions¶
none