pair_modify command¶
Syntax¶
pair_modify keyword values ...
- one or more keyword/value pairs may be listed
- keyword = pair or shift or mix or table or table/disp or tabinner or tabinner/disp or tail or compute
pair values = sub-style N special which wt1 wt2 wt3 sub-style = sub-style of pair hybrid N = which instance of sub-style (only if sub-style is used multiple times) special which wt1 wt2 wt3 = override special_bonds settings (optional) which = lj/coul or lj or coul w1,w2,w3 = 1-2, 1-3, and 1-4 weights from 0.0 to 1.0 inclusive mix value = geometric or arithmetic or sixthpower shift value = yes or no table value = N 2^N = # of values in table table/disp value = N 2^N = # of values in table tabinner value = cutoff cutoff = inner cutoff at which to begin table (distance units) tabinner/disp value = cutoff cutoff = inner cutoff at which to begin table (distance units) tail value = yes or no compute value = yes or no
Examples¶
pair_modify shift yes mix geometric pair_modify tail yes pair_modify table 12 pair_modify pair lj/cut compute no pair_modify pair lj/cut/coul/long 1 special lj/coul 0.0 0.0 0.0:pre
Description¶
Modify the parameters of the currently defined pair style. Not all parameters are relevant to all pair styles.
If used, the pair keyword must appear first in the list of keywords. It can only be used with the hybrid and hybrid/overlay pair styles. It means that all the following parameters will only be modified for the specified sub-style. If the sub-style is defined multiple times, then an additional numeric argument N must also be specified, which is a number from 1 to M where M is the number of times the sub-style was listed in the pair_style hybrid command. The extra number indicates which instance of the sub-style the remaining keywords will be applied to. Note that if the pair keyword is not used, and the pair style is hybrid or hybrid/overlay, then all the specified keywords will be applied to all sub-styles.
The special keyword can only be used in conjunction with the pair keyword and must directly follow it. It allows to override the special_bonds settings for the specified sub-style. More details are given below.
The mix keyword affects pair coefficients for interactions between atoms of type I and J, when I != J and the coefficients are not explicitly set in the input script. Note that coefficients for I = J must be set explicitly, either in the input script via the “pair_coeff” command or in the “Pair Coeffs” section of the data file. For some pair styles it is not necessary to specify coefficients when I != J, since a “mixing” rule will create them from the I,I and J,J settings. The pair_modify mix value determines what formulas are used to compute the mixed coefficients. In each case, the cutoff distance is mixed the same way as sigma.
Note that not all pair styles support mixing. Also, some mix options are not available for certain pair styles. See the doc page for individual pair styles for those restrictions. Note also that the pair_coeff command also can be to directly set coefficients for a specific I != J pairing, in which case no mixing is performed.
mix geometric
epsilon_ij = sqrt(epsilon_i * epsilon_j)
sigma_ij = sqrt(sigma_i * sigma_j)
mix arithmetic
epsilon_ij = sqrt(epsilon_i * epsilon_j)
sigma_ij = (sigma_i + sigma_j) / 2
mix sixthpower
epsilon_ij = (2 * sqrt(epsilon_i*epsilon_j) * sigma_i^3 * sigma_j^3) /
(sigma_i^6 + sigma_j^6)
sigma_ij = ((sigma_i**6 + sigma_j**6) / 2) ^ (1/6)
The shift keyword determines whether a Lennard-Jones potential is shifted at its cutoff to 0.0. If so, this adds an energy term to each pairwise interaction which will be included in the thermodynamic output, but does not affect pair forces or atom trajectories. See the doc page for individual pair styles to see which ones support this option.
The table and table/disp keywords apply to pair styles with a long-range Coulombic term or long-range dispersion term respectively; see the doc page for individual styles to see which potentials support these options. If N is non-zero, a table of length 2^N is pre-computed for forces and energies, which can shrink their computational cost by up to a factor of 2. The table is indexed via a bit-mapping technique (Wolff) and a linear interpolation is performed between adjacent table values. In our experiments with different table styles (lookup, linear, spline), this method typically gave the best performance in terms of speed and accuracy.
The choice of table length is a tradeoff in accuracy versus speed. A larger N yields more accurate force computations, but requires more memory which can slow down the computation due to cache misses. A reasonable value of N is between 8 and 16. The default value of 12 (table of length 4096) gives approximately the same accuracy as the no-table (N = 0) option. For N = 0, forces and energies are computed directly, using a polynomial fit for the needed erfc() function evaluation, which is what earlier versions of LAMMPS did. Values greater than 16 typically slow down the simulation and will not improve accuracy; values from 1 to 8 give unreliable results.
The tabinner and tabinner/disp keywords set an inner cutoff above which the pairwise computation is done by table lookup (if tables are invoked), for the corresponding Coulombic and dispersion tables discussed with the table and table/disp keywords. The smaller the cutoff is set, the less accurate the table becomes (for a given number of table values), which can require use of larger tables. The default cutoff value is sqrt(2.0) distance units which means nearly all pairwise interactions are computed via table lookup for simulations with “real” units, but some close pairs may be computed directly (non-table) for simulations with “lj” units.
When the tail keyword is set to yes, certain pair styles will add a long-range VanderWaals tail “correction” to the energy and pressure. These corrections are bookkeeping terms which do not affect dynamics, unless a constant-pressure simulation is being performed. See the doc page for individual styles to see which support this option. These corrections are included in the calculation and printing of thermodynamic quantities (see the thermo_style command). Their effect will also be included in constant NPT or NPH simulations where the pressure influences the simulation box dimensions (e.g. the fix npt and fix nph commands). The formulas used for the long-range corrections come from equation 5 of (Sun).
Note
The tail correction terms are computed at the beginning of each run, using the current atom counts of each atom type. If atoms are deleted (or lost) or created during a simulation, e.g. via the fix gcmc command, the correction factors are not re-computed. If you expect the counts to change dramatically, you can break a run into a series of shorter runs so that the correction factors are re-computed more frequently.
Several additional assumptions are inherent in using tail corrections, including the following:
- The simulated system is a 3d bulk homogeneous liquid. This option should not be used for systems that are non-liquid, 2d, have a slab geometry (only 2d periodic), or inhomogeneous.
- G(r), the radial distribution function (rdf), is unity beyond the cutoff, so a fairly large cutoff should be used (i.e. 2.5 sigma for an LJ fluid), and it is probably a good idea to verify this assumption by checking the rdf. The rdf is not exactly unity beyond the cutoff for each pair of interaction types, so the tail correction is necessarily an approximation.
The tail corrections are computed at the beginning of each simulation run. If the number of atoms changes during the run, e.g. due to atoms leaving the simulation domain, or use of the fix gcmc command, then the corrections are not updates to relect the changed atom count. If this is a large effect in your simulation, you should break the long run into several short runs, so that the correction factors are re-computed multiple times.
- Thermophysical properties obtained from calculations with this option enabled will not be thermodynamically consistent with the truncated force-field that was used. In other words, atoms do not feel any LJ pair interactions beyond the cutoff, but the energy and pressure reported by the simulation include an estimated contribution from those interactions.
The compute keyword allows pairwise computations to be turned off, even though a pair_style is defined. This is not useful for running a real simulation, but can be useful for debugging purposes or for performing a rerun simulation, when you only wish to compute partial forces that do not include the pairwise contribution.
Two examples are as follows. First, this option allows you to perform a simulation with pair_style hybrid with only a subset of the hybrid sub-styles enabled. Second, this option allows you to perform a simulation with only long-range interactions but no short-range pairwise interactions. Doing this by simply not defining a pair style will not work, because the kspace_style command requires a Kspace-compatible pair style be defined.
Use of special keyword¶
The special keyword allows to override the 1-2, 1-3, and 1-4 exclusion settings for individual sub-styles of a hybrid pair style. It requires 4 arguments similar to the special_bonds command, which and wt1,wt2,wt3. The which argument can be lj to change the Lennard-Jones settings, coul to change the Coulombic settings, or lj/coul to change both to the same set of 3 values. The wt1,wt2,wt3 values are numeric weights from 0.0 to 1.0 inclusive, for the 1-2, 1-3, and 1-4 bond topology neighbors, respectively. The special keyword can only be used in conjunction with the pair keyword and has to directly follow it.
Note
The global settings specified by the special_bonds command affect the construction of neighbor lists. Weights of 0.0 (for 1-2, 1-3, or 1-4 neighbors) exclude those pairs from the neighbor list entirely. Weights of 1.0 store the neighbor with no weighting applied. Thus only global values different from exactly 0.0 or 1.0 can be overridden and an error is generated if the requested setting is not compatible with the global setting. Substituting 1.0e-10 for 0.0 and 0.9999999999 for 1.0 is usually a sufficient workaround in this case without causing a significant error.
Restrictions¶
none
You cannot use shift yes with tail yes, since those are conflicting options. You cannot use tail yes with 2d simulations.
Default¶
The option defaults are mix = geometric, shift = no, table = 12, tabinner = sqrt(2.0), tail = no, and compute = yes.
Note that some pair styles perform mixing, but only a certain style of mixing. See the doc pages for individual pair styles for details.
(Wolff) Wolff and Rudd, Comp Phys Comm, 120, 200-32 (1999).
(Sun) Sun, J Phys Chem B, 102, 7338-7364 (1998).