{
  "type": "object",
  "required": [
    "workflowType",
    "workflowId"
  ],
  "properties": {
    "workflowType": {
      "allOf": [
        {
          "$ref": "#/components/schemas/WorkflowType"
        },
        {
          "description": " The type of the workflow execution to be started."
        }
      ]
    },
    "workflowId": {
      "allOf": [
        {
          "$ref": "#/components/schemas/WorkflowId"
        },
        {
          "description": "<p> The <code>workflowId</code> of the workflow execution.</p> <p>The specified string must not contain a <code>:</code> (colon), <code>/</code> (slash), <code>|</code> (vertical bar), or any control characters (<code>\\u0000-\\u001f</code> | <code>\\u007f-\\u009f</code>). Also, it must <i>not</i> be the literal string <code>arn</code>.</p>"
        }
      ]
    },
    "control": {
      "allOf": [
        {
          "$ref": "#/components/schemas/Data"
        },
        {
          "description": "The data attached to the event that can be used by the decider in subsequent workflow tasks. This data isn't sent to the child workflow execution."
        }
      ]
    },
    "input": {
      "allOf": [
        {
          "$ref": "#/components/schemas/Data"
        },
        {
          "description": "The input to be provided to the workflow execution."
        }
      ]
    },
    "executionStartToCloseTimeout": {
      "allOf": [
        {
          "$ref": "#/components/schemas/DurationInSecondsOptional"
        },
        {
          "description": "<p>The total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout specified when registering the workflow type.</p> <p>The duration is specified in seconds, an integer greater than or equal to <code>0</code>. You can use <code>NONE</code> to specify unlimited duration.</p> <note> <p>An execution start-to-close timeout for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default execution start-to-close timeout was specified at registration time then a fault is returned.</p> </note>"
        }
      ]
    },
    "taskList": {
      "allOf": [
        {
          "$ref": "#/components/schemas/TaskList"
        },
        {
          "description": "<p>The name of the task list to be used for decision tasks of the child workflow execution.</p> <note> <p>A task list for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task list was specified at registration time then a fault is returned.</p> </note> <p>The specified string must not start or end with whitespace. It must not contain a <code>:</code> (colon), <code>/</code> (slash), <code>|</code> (vertical bar), or any control characters (<code>\\u0000-\\u001f</code> | <code>\\u007f-\\u009f</code>). Also, it must <i>not</i> be the literal string <code>arn</code>.</p>"
        }
      ]
    },
    "taskPriority": {
      "allOf": [
        {
          "$ref": "#/components/schemas/TaskPriority"
        },
        {
          "description": "<p> A task priority that, if set, specifies the priority for a decision task of this workflow execution. This overrides the defaultTaskPriority specified when registering the workflow type. Valid values are integers that range from Java's <code>Integer.MIN_VALUE</code> (-2147483648) to <code>Integer.MAX_VALUE</code> (2147483647). Higher numbers indicate higher priority.</p> <p>For more information about setting task priority, see <a href=\"https://docs.aws.amazon.com/amazonswf/latest/developerguide/programming-priority.html\">Setting Task Priority</a> in the <i>Amazon SWF Developer Guide</i>.</p>"
        }
      ]
    },
    "taskStartToCloseTimeout": {
      "allOf": [
        {
          "$ref": "#/components/schemas/DurationInSecondsOptional"
        },
        {
          "description": "<p>Specifies the maximum duration of decision tasks for this workflow execution. This parameter overrides the <code>defaultTaskStartToCloseTimout</code> specified when registering the workflow type using <a>RegisterWorkflowType</a>.</p> <p>The duration is specified in seconds, an integer greater than or equal to <code>0</code>. You can use <code>NONE</code> to specify unlimited duration.</p> <note> <p>A task start-to-close timeout for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task start-to-close timeout was specified at registration time then a fault is returned.</p> </note>"
        }
      ]
    },
    "childPolicy": {
      "allOf": [
        {
          "$ref": "#/components/schemas/ChildPolicy"
        },
        {
          "description": "<p> If set, specifies the policy to use for the child workflow executions if the workflow execution being started is terminated by calling the <a>TerminateWorkflowExecution</a> action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using <a>RegisterWorkflowType</a>.</p> <p>The supported child policies are:</p> <ul> <li> <p> <code>TERMINATE</code> \u2013 The child executions are terminated.</p> </li> <li> <p> <code>REQUEST_CANCEL</code> \u2013 A request to cancel is attempted for each child execution by recording a <code>WorkflowExecutionCancelRequested</code> event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.</p> </li> <li> <p> <code>ABANDON</code> \u2013 No action is taken. The child executions continue to run.</p> </li> </ul> <note> <p>A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault is returned.</p> </note>"
        }
      ]
    },
    "tagList": {
      "allOf": [
        {
          "$ref": "#/components/schemas/TagList"
        },
        {
          "description": "The list of tags to associate with the child workflow execution. A maximum of 5 tags can be specified. You can list workflow executions with a specific tag by calling <a>ListOpenWorkflowExecutions</a> or <a>ListClosedWorkflowExecutions</a> and specifying a <a>TagFilter</a>."
        }
      ]
    },
    "lambdaRole": {
      "allOf": [
        {
          "$ref": "#/components/schemas/Arn"
        },
        {
          "description": "The IAM role attached to the child workflow execution."
        }
      ]
    }
  },
  "description": "<p>Provides the details of the <code>StartChildWorkflowExecution</code> decision.</p> <p> <b>Access Control</b> </p> <p>You can use IAM policies to control this decision's access to Amazon SWF resources as follows:</p> <ul> <li> <p>Use a <code>Resource</code> element with the domain name to limit the action to only specified domains.</p> </li> <li> <p>Use an <code>Action</code> element to allow or deny permission to call this action.</p> </li> <li> <p>Constrain the following parameters by using a <code>Condition</code> element with the appropriate keys.</p> <ul> <li> <p> <code>tagList.member.N</code> \u2013 The key is \"swf:tagList.N\" where N is the tag number from 0 to 4, inclusive.</p> </li> <li> <p> <code>taskList</code> \u2013 String constraint. The key is <code>swf:taskList.name</code>.</p> </li> <li> <p> <code>workflowType.name</code> \u2013 String constraint. The key is <code>swf:workflowType.name</code>.</p> </li> <li> <p> <code>workflowType.version</code> \u2013 String constraint. The key is <code>swf:workflowType.version</code>.</p> </li> </ul> </li> </ul> <p>If the caller doesn't have sufficient permissions to invoke the action, or the parameter values fall outside the specified constraints, the action fails. The associated event attribute's <code>cause</code> parameter is set to <code>OPERATION_NOT_PERMITTED</code>. For details and example IAM policies, see <a href=\"https://docs.aws.amazon.com/amazonswf/latest/developerguide/swf-dev-iam.html\">Using IAM to Manage Access to Amazon SWF Workflows</a> in the <i>Amazon SWF Developer Guide</i>.</p>",
  "$schema": "http://json-schema.org/draft-07/schema#",
  "title": "StartChildWorkflowExecutionDecisionAttributes"
}