basePath: /
consumes:
    - application/json
    - application/x-tar
definitions:
    AccessMode:
        properties:
            BlockVolume:
                $ref: '#/definitions/TypeBlock'
            MountVolume:
                $ref: '#/definitions/TypeMount'
            Scope:
                $ref: '#/definitions/Scope'
            Sharing:
                $ref: '#/definitions/SharingMode'
        title: AccessMode defines the access mode of a volume.
        type: object
        x-go-package: github.com/moby/moby/api/types/volume
    Address:
        properties:
            Addr:
                type: string
            PrefixLength:
                format: int64
                type: integer
        title: Address represents an IP address.
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    ArtifactAddReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ArtifactInspectReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ArtifactListReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ArtifactPullReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ArtifactPushReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ArtifactRemoveReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ArtifactVolume:
        description: |-
            ArtifactVolume is a volume based on a artifact. The artifact blobs will
            be bind mounted directly as files and must always be read only.
        properties:
            destination:
                description: |-
                    Destination is the absolute path of the mount in the container.
                    If path is a file in the container, then the artifact must consist of a single blob.
                    Otherwise if it is a directory or does not exists all artifact blobs will be mounted
                    into this path as files. As name the "org.opencontainers.image.title" will be used if
                    available otherwise the digest is used as name.
                type: string
                x-go-name: Destination
            digest:
                description: |-
                    Digest can be used to filter a single blob from a multi blob artifact by the given digest.
                    When this option is set the file name in the container defaults to the digest even when
                    the title annotation exist.
                    Optional. Conflicts with Title.
                type: string
                x-go-name: Digest
            name:
                description: |-
                    Name is the name that should be used for the path inside the container. When a single blob
                    is mounted the name is used as is. If multiple blobs are mounted then mount them as
                    "<name>-x" where x is a 0 indexed integer based on the layer order.
                    Optional.
                type: string
                x-go-name: Name
            source:
                description: Source is the name or digest of the artifact that should be mounted
                type: string
                x-go-name: Source
            title:
                description: |-
                    Title can be used for multi blob artifacts to only mount the one specific blob that
                    matches the "org.opencontainers.image.title" annotation.
                    Optional. Conflicts with Digest.
                type: string
                x-go-name: Title
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    AttestationProperties:
        properties:
            For:
                $ref: '#/definitions/Digest'
        type: object
        x-go-package: github.com/moby/moby/api/types/image
    AuthConfig:
        description: AuthConfig contains authorization information for connecting to a Registry
        properties:
            auth:
                type: string
                x-go-name: Auth
            email:
                description: |-
                    Email is an optional value associated with the username.
                    This field is deprecated and will be removed in a later
                    version of docker.
                type: string
                x-go-name: Email
            identitytoken:
                description: |-
                    IdentityToken is used to authenticate the user and get
                    an access token for the registry.
                type: string
                x-go-name: IdentityToken
            password:
                type: string
                x-go-name: Password
            registrytoken:
                description: RegistryToken is a bearer token to be sent to a registry
                type: string
                x-go-name: RegistryToken
            serveraddress:
                type: string
                x-go-name: ServerAddress
            username:
                type: string
                x-go-name: Username
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities/types
    AuthReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    AutoUserNsOptions:
        properties:
            AdditionalGIDMappings:
                description: |-
                    AdditionalGIDMappings specified additional GID mappings to include in
                    the generated user namespace.
                items:
                    $ref: '#/definitions/IDMap'
                type: array
            AdditionalUIDMappings:
                description: |-
                    AdditionalUIDMappings specified additional UID mappings to include in
                    the generated user namespace.
                items:
                    $ref: '#/definitions/IDMap'
                type: array
            GroupFile:
                description: GroupFile to use if the container uses a volume.
                type: string
            InitialSize:
                description: |-
                    InitialSize defines the minimum size for the user namespace.
                    The created user namespace will have at least this size.
                format: uint32
                type: integer
            PasswdFile:
                description: PasswdFile to use if the container uses a volume.
                type: string
            Size:
                description: |-
                    Size defines the size for the user namespace.  If it is set to a
                    value bigger than 0, the user namespace will have exactly this size.
                    If it is not set, some heuristics will be used to find its size.
                format: uint32
                type: integer
        title: AutoUserNsOptions defines how to automatically create a user namespace.
        type: object
        x-go-package: go.podman.io/storage/types
    Availability:
        title: Availability specifies the availability of the volume.
        type: string
        x-go-package: github.com/moby/moby/api/types/volume
    BindOptions:
        properties:
            CreateMountpoint:
                type: boolean
            NonRecursive:
                type: boolean
            Propagation:
                $ref: '#/definitions/Propagation'
            ReadOnlyForceRecursive:
                description: ReadOnlyForceRecursive raises an error if the mount cannot be made recursively read-only.
                type: boolean
            ReadOnlyNonRecursive:
                description: |-
                    ReadOnlyNonRecursive makes the mount non-recursively read-only, but still leaves the mount recursive
                    (unless NonRecursive is set to true in conjunction).
                type: boolean
        title: BindOptions defines options specific to mounts of type "bind".
        type: object
        x-go-package: github.com/moby/moby/api/types/mount
    BuildIdentity:
        properties:
            CreatedAt:
                description: CreatedAt is the time when the build ran.
                format: date-time
                type: string
            Ref:
                description: |-
                    Ref is the identifier for the build request. This reference can be used to
                    look up the build details in BuildKit history API.
                type: string
        title: BuildIdentity contains build reference information if image was created via build.
        type: object
        x-go-package: github.com/moby/moby/api/types/image
    CPUUsage:
        properties:
            idlePercent:
                format: double
                type: number
                x-go-name: IdlePercent
            systemPercent:
                format: double
                type: number
                x-go-name: SystemPercent
            userPercent:
                format: double
                type: number
                x-go-name: UserPercent
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    CapacityRange:
        description: |-
            CapacityRange describes the minimum and maximum capacity a volume should be
            created with
        properties:
            LimitBytes:
                description: |-
                    LimitBytes specifies that a volume must not be bigger than this. The
                    value of 0 indicates an unspecified maximum
                format: int64
                type: integer
            RequiredBytes:
                description: |-
                    RequiredBytes specifies that a volume must be at least this big. The
                    value of 0 indicates an unspecified minimum.
                format: int64
                type: integer
        type: object
        x-go-package: github.com/moby/moby/api/types/volume
    CgroupSpec:
        title: CgroupSpec represents the cgroup to use for the container.
        type: string
        x-go-package: github.com/moby/moby/api/types/container
    CgroupnsMode:
        description: CgroupnsMode represents the cgroup namespace mode of the container
        type: string
        x-go-package: github.com/moby/moby/api/types/container
    ClusterOptions:
        title: ClusterOptions specifies options for a Cluster volume.
        type: object
        x-go-package: github.com/moby/moby/api/types/mount
    ClusterVolume:
        description: |-
            ClusterVolume contains options and information specific to, and only present
            on, Swarm CSI cluster volumes.
        properties:
            CreatedAt:
                format: date-time
                type: string
            ID:
                description: |-
                    ID is the Swarm ID of the volume. Because cluster volumes are Swarm
                    objects, they have an ID, unlike non-cluster volumes, which only have a
                    Name. This ID can be used to refer to the cluster volume.
                type: string
            Info:
                $ref: '#/definitions/Info'
            PublishStatus:
                description: |-
                    PublishStatus contains the status of the volume as it pertains to its
                    publishing on Nodes.
                items:
                    $ref: '#/definitions/PublishStatus'
                type: array
            Spec:
                $ref: '#/definitions/ClusterVolumeSpec'
            UpdatedAt:
                format: date-time
                type: string
            Version:
                $ref: '#/definitions/Version'
        type: object
        x-go-package: github.com/moby/moby/api/types/volume
    ClusterVolumeSpec:
        properties:
            AccessMode:
                $ref: '#/definitions/AccessMode'
            AccessibilityRequirements:
                $ref: '#/definitions/TopologyRequirement'
            Availability:
                $ref: '#/definitions/Availability'
            CapacityRange:
                $ref: '#/definitions/CapacityRange'
            Group:
                description: |-
                    Group defines the volume group of this volume. Volumes belonging to the
                    same group can be referred to by group name when creating Services.
                    Referring to a volume by group instructs swarm to treat volumes in that
                    group interchangeably for the purpose of scheduling. Volumes with an
                    empty string for a group technically all belong to the same, emptystring
                    group.
                type: string
            Secrets:
                description: |-
                    Secrets defines Swarm Secrets that are passed to the CSI storage plugin
                    when operating on this volume.
                items:
                    $ref: '#/definitions/Secret'
                type: array
        title: ClusterVolumeSpec contains the spec used to create this volume.
        type: object
        x-go-package: github.com/moby/moby/api/types/volume
    ComponentVersion:
        description: ServiceOptions provides the input for starting an API and sidecar pprof services
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    Config:
        description: |-
            It should hold only portable information about the container.
            Here, "portable" means "independent from the host we are running on".
            Non-portable information *should* appear in HostConfig.
            All fields added to this struct must be marked `omitempty` to keep getting
            predictable hashes from the old `v1Compatibility` configuration.
        properties:
            ArgsEscaped:
                type: boolean
            AttachStderr:
                type: boolean
            AttachStdin:
                type: boolean
            AttachStdout:
                type: boolean
            Cmd:
                items:
                    type: string
                type: array
            Domainname:
                type: string
            Entrypoint:
                items:
                    type: string
                type: array
            Env:
                items:
                    type: string
                type: array
            ExposedPorts:
                $ref: '#/definitions/PortSet'
            Healthcheck:
                $ref: '#/definitions/HealthConfig'
            Hostname:
                type: string
            Image:
                type: string
            Labels:
                additionalProperties:
                    type: string
                type: object
            NetworkDisabled:
                type: boolean
            OnBuild:
                items:
                    type: string
                type: array
            OpenStdin:
                type: boolean
            Shell:
                items:
                    type: string
                type: array
            StdinOnce:
                type: boolean
            StopSignal:
                type: string
            StopTimeout:
                format: int64
                type: integer
            Tty:
                type: boolean
            User:
                type: string
            Volumes:
                additionalProperties:
                    type: object
                type: object
            WorkingDir:
                type: string
        title: Config contains the configuration data about a container.
        type: object
        x-go-package: github.com/moby/moby/api/types/container
    ConfigReference:
        description: |-
            ConfigReference The config-only network source to provide the configuration for
            this network.
        properties:
            Network:
                description: |-
                    The name of the config-only network that provides the network's
                    configuration. The specified network must be an existing config-only
                    network. Only network names are allowed, not network IDs.
                example: config_only_network_01
                type: string
        type: object
        x-go-package: github.com/moby/moby/api/types/network
    ConmonInfo:
        description: ConmonInfo describes the conmon executable being used
        properties:
            package:
                type: string
                x-go-name: Package
            path:
                type: string
                x-go-name: Path
            version:
                type: string
                x-go-name: Version
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    ConnectRequest:
        properties:
            Container:
                description: The ID or name of the container to connect to the network.
                example: 3613f73ba0e4
                type: string
            EndpointConfig:
                $ref: '#/definitions/EndpointSettings'
        required:
            - Container
        title: ConnectRequest NetworkConnectRequest represents the data to be used to connect a container to a network.
        type: object
        x-go-package: github.com/moby/moby/api/types/network
    Consistency:
        title: Consistency represents the consistency requirements of a mount.
        type: string
        x-go-package: github.com/moby/moby/api/types/mount
    Container:
        properties:
            Command:
                type: string
            Config:
                $ref: '#/definitions/Config'
            Created:
                format: int64
                type: integer
            DefaultReadOnlyNonRecursive:
                type: boolean
            Health:
                $ref: '#/definitions/HealthSummary'
            HostConfig:
                $ref: '#/definitions/HostConfig'
                type: object
            Id:
                type: string
                x-go-name: ID
            Image:
                type: string
            ImageID:
                type: string
            ImageManifestDescriptor:
                $ref: '#/definitions/Descriptor'
            Labels:
                additionalProperties:
                    type: string
                type: object
            Mounts:
                items:
                    $ref: '#/definitions/MountPoint'
                type: array
            Name:
                type: string
            Names:
                items:
                    type: string
                type: array
            NetworkSettings:
                $ref: '#/definitions/NetworkSettingsSummary'
            NetworkingConfig:
                $ref: '#/definitions/NetworkingConfig'
            Platform:
                $ref: '#/definitions/Platform'
            Ports:
                items:
                    $ref: '#/definitions/PortSummary'
                type: array
            SizeRootFs:
                format: int64
                type: integer
            SizeRw:
                format: int64
                type: integer
            State:
                $ref: '#/definitions/ContainerState'
            Status:
                type: string
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/api/handlers
    ContainerBasicConfig:
        properties:
            annotations:
                additionalProperties:
                    type: string
                description: |-
                    Annotations are key-value options passed into the container runtime
                    that can be used to trigger special behavior.
                    Optional.
                type: object
                x-go-name: Annotations
            command:
                description: |-
                    Command is the container's command.
                    If not given and Image is specified, this will be populated by the
                    image's configuration.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: Command
            conmon_pid_file:
                description: |-
                    ConmonPidFile is a path at which a PID file for Conmon will be
                    placed.
                    If not given, a default location will be used.
                    Optional.
                type: string
                x-go-name: ConmonPidFile
            containerCreateCommand:
                description: |-
                    ContainerCreateCommand is the command that was used to create this
                    container.
                    This will be shown in the output of Inspect() on the container, and
                    may also be used by some tools that wish to recreate the container
                    (e.g. `podman generate systemd --new`).
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: ContainerCreateCommand
            dependencyContainers:
                description: |-
                    DependencyContainers is an array of containers this container
                    depends on. Dependency containers must be started before this
                    container. Dependencies can be specified by name or full/partial ID.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: DependencyContainers
            entrypoint:
                description: |-
                    Entrypoint is the container's entrypoint.
                    If not given and Image is specified, this will be populated by the
                    image's configuration.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: Entrypoint
            env:
                additionalProperties:
                    type: string
                description: |-
                    Env is a set of environment variables that will be set in the
                    container.
                    Optional.
                type: object
                x-go-name: Env
            env_host:
                description: |-
                    EnvHost indicates that the host environment should be added to container
                    Optional.
                type: boolean
                x-go-name: EnvHost
            envmerge:
                description: |-
                    EnvMerge takes the specified environment variables from image and preprocess them before injecting them into the
                    container.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: EnvMerge
            group_entry:
                description: |-
                    GroupEntry specifies an arbitrary string to append to the container's /etc/group file.
                    Optional.
                type: string
                x-go-name: GroupEntry
            hostname:
                description: |-
                    Hostname is the container's hostname. If not set, the hostname will
                    not be modified (if UtsNS is not private) or will be set to the
                    container ID (if UtsNS is private).
                    Conflicts with UtsNS if UtsNS is not set to private.
                    Optional.
                type: string
                x-go-name: Hostname
            hostusers:
                description: |-
                    HostUsers is a list of host usernames or UIDs to add to the container
                    etc/passwd file
                items:
                    type: string
                type: array
                x-go-name: HostUsers
            httpproxy:
                description: |-
                    EnvHTTPProxy indicates that the http host proxy environment variables
                    should be added to container
                    Optional.
                type: boolean
                x-go-name: HTTPProxy
            init_container_type:
                description: |-
                    InitContainerType describes if this container is an init container
                    and if so, what type: always or once.
                    Optional.
                type: string
                x-go-name: InitContainerType
            labels:
                additionalProperties:
                    type: string
                description: |-
                    Labels are key-value pairs that are used to add metadata to
                    containers.
                    Optional.
                type: object
                x-go-name: Labels
            log_configuration:
                $ref: '#/definitions/LogConfigLibpod'
            manage_password:
                description: Passwd is a container run option that determines if we are validating users/groups before running the container
                type: boolean
                x-go-name: Passwd
            name:
                description: |-
                    Name is the name the container will be given.
                    If no name is provided, one will be randomly generated.
                    Optional.
                type: string
                x-go-name: Name
            oci_runtime:
                description: |-
                    OCIRuntime is the name of the OCI runtime that will be used to create
                    the container.
                    If not specified, the default will be used.
                    Optional.
                type: string
                x-go-name: OCIRuntime
            passwd_entry:
                description: |-
                    PasswdEntry specifies an arbitrary string to append to the container's /etc/passwd file.
                    Optional.
                type: string
                x-go-name: PasswdEntry
            personality:
                $ref: '#/definitions/LinuxPersonality'
            pidns:
                $ref: '#/definitions/Namespace'
            pod:
                description: |-
                    Pod is the ID of the pod the container will join.
                    Optional.
                type: string
                x-go-name: Pod
            remove:
                description: |-
                    Remove indicates if the container should be removed once it has been started
                    and exits.
                    Optional.
                type: boolean
                x-go-name: Remove
            removeImage:
                description: |-
                    RemoveImage indicates that the container should remove the image it
                    was created from after it exits.
                    Only allowed if Remove is set to true and Image, not Rootfs, is in
                    use.
                    Optional.
                type: boolean
                x-go-name: RemoveImage
            restart_policy:
                description: |-
                    RestartPolicy is the container's restart policy - an action which
                    will be taken when the container exits.
                    If not given, the default policy, which does nothing, will be used.
                    Optional.
                type: string
                x-go-name: RestartPolicy
            restart_tries:
                description: |-
                    RestartRetries is the number of attempts that will be made to restart
                    the container.
                    Only available when RestartPolicy is set to "on-failure".
                    Optional.
                format: uint64
                type: integer
                x-go-name: RestartRetries
            sdnotifyMode:
                description: |-
                    Determine how to handle the NOTIFY_SOCKET - do we participate or pass it through
                    "container" - let the OCI runtime deal with it, advertise conmon's MAINPID
                    "conmon-only" - advertise conmon's MAINPID, send READY when started, don't pass to OCI
                    "ignore" - unset NOTIFY_SOCKET
                    Optional.
                type: string
                x-go-name: SdNotifyMode
            secret_env:
                additionalProperties:
                    type: string
                description: |-
                    EnvSecrets are secrets that will be set as environment variables
                    Optional.
                type: object
                x-go-name: EnvSecrets
            stdin:
                description: |-
                    Stdin is whether the container will keep its STDIN open.
                    Optional.
                type: boolean
                x-go-name: Stdin
            stop_signal:
                $ref: '#/definitions/Signal'
            stop_timeout:
                description: |-
                    StopTimeout is a timeout between the container's stop signal being
                    sent and SIGKILL being sent.
                    If not provided, the default will be used.
                    If 0 is used, stop signal will not be sent, and SIGKILL will be sent
                    instead.
                    Optional.
                format: uint64
                type: integer
                x-go-name: StopTimeout
            sysctl:
                additionalProperties:
                    type: string
                description: Sysctl sets kernel parameters for the container
                type: object
                x-go-name: Sysctl
            systemd:
                description: |-
                    Systemd is whether the container will be started in systemd mode.
                    Valid options are "true", "false", and "always".
                    "true" enables this mode only if the binary run in the container is
                    sbin/init or systemd. "always" unconditionally enables systemd mode.
                    "false" unconditionally disables systemd mode.
                    If enabled, mounts and stop signal will be modified.
                    If set to "always" or set to "true" and conditionally triggered,
                    conflicts with StopSignal.
                    If not specified, "false" will be assumed.
                    Optional.
                type: string
                x-go-name: Systemd
            terminal:
                description: |-
                    Terminal is whether the container will create a PTY.
                    Optional.
                type: boolean
                x-go-name: Terminal
            timeout:
                description: |-
                    Timeout is a maximum time in seconds the container will run before
                    main process is sent SIGKILL.
                    If 0 is used, signal will not be sent. Container can run indefinitely
                    if they do not stop after the default termination signal.
                    Optional.
                format: uint64
                type: integer
                x-go-name: Timeout
            timezone:
                description: |-
                    Timezone is the timezone inside the container.
                    Local means it has the same timezone as the host machine
                    Optional.
                type: string
                x-go-name: Timezone
            unsetenv:
                description: |-
                    UnsetEnv unsets the specified default environment variables from the image or from built-in or containers.conf
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: UnsetEnv
            unsetenvall:
                description: |-
                    UnsetEnvAll unsetall default environment variables from the image or from built-in or containers.conf
                    UnsetEnvAll unsets all default environment variables from the image or from built-in
                    Optional.
                type: boolean
                x-go-name: UnsetEnvAll
            utsns:
                $ref: '#/definitions/Namespace'
        title: ContainerBasicConfig contains the basic parts of a container.
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    ContainerCgroupConfig:
        description: |-
            ContainerCgroupConfig contains configuration information about a container's
            cgroups.
        properties:
            cgroup_parent:
                description: |-
                    CgroupParent is the container's Cgroup parent.
                    If not set, the default for the current cgroup driver will be used.
                    Optional.
                type: string
                x-go-name: CgroupParent
            cgroupns:
                $ref: '#/definitions/Namespace'
            cgroups_mode:
                description: |-
                    CgroupsMode sets a policy for how cgroups will be created for the
                    container, including the ability to disable creation entirely.
                    Optional.
                type: string
                x-go-name: CgroupsMode
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    ContainerCreateResponse:
        description: ContainerCreateResponse is the response struct for creating a container
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ContainerHealthCheckConfig:
        description: |-
            ContainerHealthCheckConfig describes a container healthcheck with attributes
            like command, retries, interval, start period, and timeout.
        properties:
            health_check_on_failure_action:
                $ref: '#/definitions/HealthCheckOnFailureAction'
            healthLogDestination:
                description: |-
                    HealthLogDestination defines the destination where the log is stored.
                    TODO (6.0): In next major release convert it to pointer and use omitempty
                type: string
                x-go-name: HealthLogDestination
            healthMaxLogCount:
                description: |-
                    HealthMaxLogCount is maximum number of attempts in the HealthCheck log file.
                    ('0' value means an infinite number of attempts in the log file).
                    TODO (6.0): In next major release convert it to pointer and use omitempty
                format: uint64
                type: integer
                x-go-name: HealthMaxLogCount
            healthMaxLogSize:
                description: |-
                    HealthMaxLogSize is the maximum length in characters of stored HealthCheck log
                    ("0" value means an infinite log length).
                    TODO (6.0): In next major release convert it to pointer and use omitempty
                format: uint64
                type: integer
                x-go-name: HealthMaxLogSize
            healthconfig:
                $ref: '#/definitions/Schema2HealthConfig'
            startupHealthConfig:
                $ref: '#/definitions/StartupHealthCheck'
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    ContainerNetworkConfig:
        description: |-
            ContainerNetworkConfig contains information on a container's network
            configuration.
        properties:
            Networks:
                additionalProperties:
                    $ref: '#/definitions/PerNetworkOptions'
                description: |-
                    Map of networks names or ids that the container should join.
                    You can request additional settings for each network, you can
                    set network aliases, static ips, static mac address  and the
                    network interface name for this container on the specific network.
                    If the map is empty and the bridge network mode is set the container
                    will be joined to the default network.
                    Optional.
                type: object
            base_hosts_file:
                description: |-
                    BaseHostsFile is the base file to create the `/etc/hosts` file inside the container.
                    This must either be an absolute path to a file on the host system, or one of the
                    special flags `image` or `none`.
                    If it is empty it defaults to the base_hosts_file configuration in containers.conf.
                    Optional.
                type: string
                x-go-name: BaseHostsFile
            dns_option:
                description: |-
                    DNSOptions is a set of DNS options that will be used in the
                    container's resolv.conf, replacing the host's DNS options which are
                    used by default.
                    Conflicts with UseImageResolvConf.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: DNSOptions
            dns_search:
                description: |-
                    DNSSearch is a set of DNS search domains that will be used in the
                    container's resolv.conf, replacing the host's DNS search domains
                    which are used by default.
                    Conflicts with UseImageResolvConf.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: DNSSearch
            dns_server:
                description: |-
                    DNSServers is a set of DNS servers that will be used in the
                    container's resolv.conf, replacing the host's DNS Servers which are
                    used by default.
                    Conflicts with UseImageResolvConf.
                    Optional.
                items:
                    type: string
                    x-go-type: net.IP
                type: array
                x-go-name: DNSServers
            expose:
                description: |-
                    Expose is a number of ports that will be forwarded to the container
                    if PublishExposedPorts is set.
                    Expose is a map of uint16 (port number) to a string representing
                    protocol i.e map[uint16]string. Allowed protocols are "tcp", "udp", and "sctp", or some
                    combination of the three separated by commas.
                    If protocol is set to "" we will assume TCP.
                    Only available if NetNS is set to Bridge or Pasta, and
                    PublishExposedPorts is set.
                    Optional.
                x-go-name: Expose
            hostadd:
                description: |-
                    HostAdd is a set of hosts which will be added to the container's
                    etc/hosts file.
                    Conflicts with UseImageHosts.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: HostAdd
            netns:
                $ref: '#/definitions/Namespace'
            network_options:
                additionalProperties:
                    items:
                        type: string
                    type: array
                description: |-
                    NetworkOptions are additional options for each network
                    Optional.
                type: object
                x-go-name: NetworkOptions
            networkOrder:
                description: |-
                    The order that networks will be configured in.
                    If not set, alphabetical order based on network name will be used.
                    If set: Must be the same length as Networks and its contents must be every key in the Networks map.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: NetworkOrder
            portmappings:
                description: |-
                    PortBindings is a set of ports to map into the container.
                    Only available if NetNS is set to bridge or pasta.
                    Optional.
                items:
                    $ref: '#/definitions/PortMapping'
                type: array
                x-go-name: PortMappings
            publish_image_ports:
                description: |-
                    PublishExposedPorts will publish ports specified in the image to
                    random unused ports (guaranteed to be above 1024) on the host.
                    This is based on ports set in Expose below, and any ports specified
                    by the Image (if one is given).
                    Only available if NetNS is set to Bridge or Pasta.
                    Optional.
                type: boolean
                x-go-name: PublishExposedPorts
            use_image_hostname:
                description: |-
                    UseImageHostname indicates that /etc/hostname should not be managed by
                    Podman, and instead sourced from the image.
                    Optional.
                type: boolean
                x-go-name: UseImageHostname
            use_image_hosts:
                description: |-
                    UseImageHosts indicates that /etc/hosts should not be managed by
                    Podman, and instead sourced from the image.
                    Conflicts with HostAdd.
                    Optional.
                type: boolean
                x-go-name: UseImageHosts
            use_image_resolve_conf:
                description: |-
                    UseImageResolvConf indicates that resolv.conf should not be managed
                    by Podman, but instead sourced from the image.
                    Conflicts with DNSServer, DNSSearch, DNSOption.
                    Optional.
                type: boolean
                x-go-name: UseImageResolvConf
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    ContainerNetworkStats:
        description: Statistics for an individual container network interface
        properties:
            RxBytes:
                format: uint64
                type: integer
            RxDropped:
                format: uint64
                type: integer
            RxErrors:
                format: uint64
                type: integer
            RxPackets:
                format: uint64
                type: integer
            TxBytes:
                format: uint64
                type: integer
            TxDropped:
                format: uint64
                type: integer
            TxErrors:
                format: uint64
                type: integer
            TxPackets:
                format: uint64
                type: integer
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    ContainerResourceConfig:
        properties:
            intelRdt:
                $ref: '#/definitions/LinuxIntelRdt'
            oom_score_adj:
                description: |-
                    OOMScoreAdj adjusts the score used by the OOM killer to determine
                    processes to kill for the container's process.
                    Optional.
                format: int64
                type: integer
                x-go-name: OOMScoreAdj
            r_limits:
                description: |-
                    Rlimits are POSIX rlimits to apply to the container.
                    Optional.
                items:
                    $ref: '#/definitions/POSIXRlimit'
                type: array
                x-go-name: Rlimits
            resource_limits:
                $ref: '#/definitions/LinuxResources'
            throttleReadBpsDevice:
                additionalProperties:
                    $ref: '#/definitions/LinuxThrottleDevice'
                description: IO read rate limit per cgroup per device, bytes per second
                type: object
                x-go-name: ThrottleReadBpsDevice
            throttleReadIOPSDevice:
                additionalProperties:
                    $ref: '#/definitions/LinuxThrottleDevice'
                description: IO read rate limit per cgroup per device, IO per second
                type: object
                x-go-name: ThrottleReadIOPSDevice
            throttleWriteBpsDevice:
                additionalProperties:
                    $ref: '#/definitions/LinuxThrottleDevice'
                description: IO write rate limit per cgroup per device, bytes per second
                type: object
                x-go-name: ThrottleWriteBpsDevice
            throttleWriteIOPSDevice:
                additionalProperties:
                    $ref: '#/definitions/LinuxThrottleDevice'
                description: IO write rate limit per cgroup per device, IO per second
                type: object
                x-go-name: ThrottleWriteIOPSDevice
            unified:
                additionalProperties:
                    type: string
                description: |-
                    CgroupConf are key-value options passed into the container runtime
                    that are used to configure cgroup v2.
                    Optional.
                type: object
                x-go-name: CgroupConf
            weightDevice:
                additionalProperties:
                    $ref: '#/definitions/LinuxWeightDevice'
                description: Weight per cgroup per device, can override BlkioWeight
                type: object
                x-go-name: WeightDevice
        title: ContainerResourceConfig contains information on container resource limits.
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    ContainerSecurityConfig:
        description: |-
            ContainerSecurityConfig is a container's security features, including
            SELinux, Apparmor, and Seccomp.
        properties:
            apparmor_profile:
                description: |-
                    ApparmorProfile is the name of the Apparmor profile the container
                    will use.
                    Optional.
                type: string
                x-go-name: ApparmorProfile
            cap_add:
                description: |-
                    CapAdd are capabilities which will be added to the container.
                    Conflicts with Privileged.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: CapAdd
            cap_drop:
                description: |-
                    CapDrop are capabilities which will be removed from the container.
                    Conflicts with Privileged.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: CapDrop
            groups:
                description: |-
                    Groups are a list of supplemental groups the container's user will
                    be granted access to.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: Groups
            idmappings:
                $ref: '#/definitions/IDMappingOptions'
            label_nested:
                description: |-
                    LabelNested indicates whether or not the container is allowed to
                    run fully nested containers including SELinux labelling.
                    Optional.
                type: boolean
                x-go-name: LabelNested
            mask:
                description: |-
                    Mask is the path we want to mask in the container. This masks the paths
                    given in addition to the default list.
                    Optional
                items:
                    type: string
                type: array
                x-go-name: Mask
            no_new_privileges:
                description: |-
                    NoNewPrivileges is whether the container will set the no new
                    privileges flag on create, which disables gaining additional
                    privileges (e.g. via setuid) in the container.
                    Optional.
                type: boolean
                x-go-name: NoNewPrivileges
            privileged:
                description: |-
                    Privileged is whether the container is privileged.
                    Privileged does the following:
                    Adds all devices on the system to the container.
                    Adds all capabilities to the container.
                    Disables Seccomp, SELinux, and Apparmor confinement.
                    (Though SELinux can be manually re-enabled).
                    TODO: this conflicts with things.
                    TODO: this does more.
                    Optional.
                type: boolean
                x-go-name: Privileged
            procfs_opts:
                description: ProcOpts are the options used for the proc mount.
                items:
                    type: string
                type: array
                x-go-name: ProcOpts
            read_only_filesystem:
                description: |-
                    ReadOnlyFilesystem indicates that everything will be mounted
                    as read-only.
                    Optional.
                type: boolean
                x-go-name: ReadOnlyFilesystem
            read_write_tmpfs:
                description: |-
                    ReadWriteTmpfs indicates that when running with a ReadOnlyFilesystem
                    mount temporary file systems.
                    Optional.
                type: boolean
                x-go-name: ReadWriteTmpfs
            seccomp_policy:
                description: |-
                    SeccompPolicy determines which seccomp profile gets applied
                    the container. valid values: empty,default,image
                type: string
                x-go-name: SeccompPolicy
            seccomp_profile_path:
                description: |-
                    SeccompProfilePath is the path to a JSON file containing the
                    container's Seccomp profile.
                    If not specified, no Seccomp profile will be used.
                    Optional.
                type: string
                x-go-name: SeccompProfilePath
            selinux_opts:
                description: |-
                    SelinuxProcessLabel is the process label the container will use.
                    If SELinux is enabled and this is not specified, a label will be
                    automatically generated if not specified.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: SelinuxOpts
            umask:
                description: Umask is the umask the init process of the container will be run with.
                type: string
                x-go-name: Umask
            unmask:
                description: |-
                    Unmask a path in the container. Some paths are masked by default,
                    preventing them from being accessed within the container; this undoes
                    that masking. If ALL is passed, all paths will be unmasked.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: Unmask
            user:
                description: |-
                    User is the user the container will be run as.
                    Can be given as a UID or a username; if a username, it will be
                    resolved within the container, using the container's /etc/passwd.
                    If unset, the container will be run as root.
                    Optional.
                type: string
                x-go-name: User
            userns:
                $ref: '#/definitions/Namespace'
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    ContainerState:
        title: ContainerState is a string representation of the container's current state.
        type: string
        x-go-package: github.com/moby/moby/api/types/container
    ContainerStats:
        description: ContainerStats contains the statistics information for a running container
        properties:
            AvgCPU:
                format: double
                type: number
            BlockInput:
                format: uint64
                type: integer
            BlockOutput:
                format: uint64
                type: integer
            CPU:
                format: double
                type: number
            CPUNano:
                format: uint64
                type: integer
            CPUSystemNano:
                format: uint64
                type: integer
            ContainerID:
                type: string
            Duration:
                format: uint64
                type: integer
            MemLimit:
                format: uint64
                type: integer
            MemPerc:
                format: double
                type: number
            MemUsage:
                format: uint64
                type: integer
            Name:
                type: string
            Network:
                additionalProperties:
                    $ref: '#/definitions/ContainerNetworkStats'
                description: Map of interface name to network statistics for that interface.
                type: object
            PIDs:
                format: uint64
                type: integer
            SystemNano:
                format: uint64
                type: integer
            UpTime:
                $ref: '#/definitions/Duration'
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    ContainerStorageConfig:
        description: |-
            ContainerStorageConfig contains information on the storage configuration of a
            container.
        properties:
            artifact_volumes:
                description: ArtifactVolumes volumes based on an existing artifact.
                items:
                    $ref: '#/definitions/ArtifactVolume'
                type: array
                x-go-name: ArtifactVolumes
            chroot_directories:
                description: |-
                    ChrootDirs is an additional set of directories that need to be
                    treated as root directories. Standard bind mounts will be mounted
                    into paths relative to these directories.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: ChrootDirs
            create_working_dir:
                description: |-
                    Create the working directory if it doesn't exist.
                    If unset, it doesn't create it.
                    Optional.
                type: boolean
                x-go-name: CreateWorkingDir
            device_cgroup_rule:
                description: |-
                    DeviceCgroupRule are device cgroup rules that allow containers
                    to use additional types of devices.
                items:
                    $ref: '#/definitions/LinuxDeviceCgroup'
                type: array
                x-go-name: DeviceCgroupRule
            devices:
                description: |-
                    Devices are devices that will be added to the container.
                    Optional.
                items:
                    $ref: '#/definitions/LinuxDevice'
                type: array
                x-go-name: Devices
            devices_from:
                description: |-
                    DevicesFrom specifies that this container will mount the device(s) from other container(s).
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: DevicesFrom
            gpus:
                description: |-
                    GPUs contains GPU device identifiers for CDI resolution.
                    These will be resolved to full CDI device paths on the server side.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: GPUs
            host_device_list:
                description: HostDeviceList is used to recreate the mounted device on inherited containers
                items:
                    $ref: '#/definitions/LinuxDevice'
                type: array
                x-go-name: HostDeviceList
            image:
                description: |-
                    Image is the image the container will be based on. The image will be
                    used as the container's root filesystem, and its environment vars,
                    volumes, and other configuration will be applied to the container.
                    Conflicts with Rootfs.
                    At least one of Image or Rootfs must be specified.
                type: string
                x-go-name: Image
            image_arch:
                description: |-
                    ImageArch is the user-specified image architecture.
                    Used to select a different variant from a manifest list.
                    Optional.
                type: string
                x-go-name: ImageArch
            image_os:
                description: |-
                    ImageOS is the user-specified OS of the image.
                    Used to select a different variant from a manifest list.
                    Optional.
                type: string
                x-go-name: ImageOS
            image_variant:
                description: |-
                    ImageVariant is the user-specified image variant.
                    Used to select a different variant from a manifest list.
                    Optional.
                type: string
                x-go-name: ImageVariant
            image_volume_mode:
                description: |-
                    ImageVolumeMode indicates how image volumes will be created.
                    Supported modes are "ignore" (do not create), "tmpfs" (create as
                    tmpfs), and "anonymous" (create as anonymous volumes).
                    The default if unset is anonymous.
                    Optional.
                type: string
                x-go-name: ImageVolumeMode
            image_volumes:
                description: |-
                    Image volumes bind-mount a container-image mount into the container.
                    Optional.
                items:
                    $ref: '#/definitions/ImageVolume'
                type: array
                x-go-name: ImageVolumes
            init:
                description: |-
                    Init specifies that an init binary will be mounted into the
                    container, and will be used as PID1.
                    Optional.
                type: boolean
                x-go-name: Init
            init_path:
                description: |-
                    InitPath specifies the path to the init binary that will be added if
                    Init is specified above. If not specified, the default set in the
                    Libpod config will be used. Ignored if Init above is not set.
                    Optional.
                type: string
                x-go-name: InitPath
            ipcns:
                $ref: '#/definitions/Namespace'
            mounts:
                description: |-
                    Mounts are mounts that will be added to the container.
                    These will supersede Image Volumes and VolumesFrom volumes where
                    there are conflicts.
                    Optional.
                items:
                    $ref: '#/definitions/Mount'
                type: array
                x-go-name: Mounts
            overlay_volumes:
                description: |-
                    Overlay volumes are named volumes that will be added to the container.
                    Optional.
                items:
                    $ref: '#/definitions/OverlayVolume'
                type: array
                x-go-name: OverlayVolumes
            raw_image_name:
                description: |-
                    RawImageName is the user-specified and unprocessed input referring
                    to a local or a remote image.
                    Optional, but strongly encouraged to be set if Image is set.
                type: string
                x-go-name: RawImageName
            rootfs:
                description: |-
                    Rootfs is the path to a directory that will be used as the
                    container's root filesystem. No modification will be made to the
                    directory, it will be directly mounted into the container as root.
                    Conflicts with Image.
                    At least one of Image or Rootfs must be specified.
                type: string
                x-go-name: Rootfs
            rootfs_mapping:
                description: |-
                    RootfsMapping specifies if there are UID/GID mappings to apply to the rootfs.
                    Optional.
                type: string
                x-go-name: RootfsMapping
            rootfs_overlay:
                description: |-
                    RootfsOverlay tells if rootfs is actually an overlay on top of base path.
                    Optional.
                type: boolean
                x-go-name: RootfsOverlay
            rootfs_propagation:
                description: |-
                    RootfsPropagation is the rootfs propagation mode for the container.
                    If not set, the default of rslave will be used.
                    Optional.
                type: string
                x-go-name: RootfsPropagation
            secrets:
                description: |-
                    Secrets are the secrets that will be added to the container
                    Optional.
                items:
                    $ref: '#/definitions/Secret'
                type: array
                x-go-name: Secrets
            shm_size:
                description: |-
                    ShmSize is the size of the tmpfs to mount in at /dev/shm, in bytes.
                    Conflicts with ShmSize if IpcNS is not private.
                    Optional.
                format: int64
                type: integer
                x-go-name: ShmSize
            shm_size_systemd:
                description: |-
                    ShmSizeSystemd is the size of systemd-specific tmpfs mounts
                    specifically /run, /run/lock, /var/log/journal and /tmp.
                    Optional
                format: int64
                type: integer
                x-go-name: ShmSizeSystemd
            storage_opts:
                additionalProperties:
                    type: string
                description: |-
                    StorageOpts is the container's storage options
                    Optional.
                type: object
                x-go-name: StorageOpts
            volatile:
                description: |-
                    Volatile specifies whether the container storage can be optimized
                    at the cost of not syncing all the dirty files in memory.
                    Optional.
                type: boolean
                x-go-name: Volatile
            volumes:
                description: |-
                    Volumes are named volumes that will be added to the container.
                    These will supersede Image Volumes and VolumesFrom volumes where
                    there are conflicts.
                    Optional.
                items:
                    $ref: '#/definitions/NamedVolume'
                type: array
                x-go-name: Volumes
            volumes_from:
                description: |-
                    VolumesFrom is a set of containers whose volumes will be added to
                    this container. The name or ID of the container must be provided, and
                    may optionally be followed by a : and then one or more
                    comma-separated options. Valid options are 'ro', 'rw', and 'z'.
                    Options will be used for all volumes sourced from the container.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: VolumesFrom
            work_dir:
                description: |-
                    WorkDir is the container's working directory.
                    If unset, the default, /, will be used.
                    Optional.
                type: string
                x-go-name: WorkDir
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    ContainerStore:
        description: |-
            ContainerStore describes the quantity of containers in the
            store by status
        properties:
            number:
                format: int64
                type: integer
                x-go-name: Number
            paused:
                format: int64
                type: integer
                x-go-name: Paused
            running:
                format: int64
                type: integer
                x-go-name: Running
            stopped:
                format: int64
                type: integer
                x-go-name: Stopped
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    ContainerTopOKBody:
        properties:
            Processes:
                description: |-
                    Each process running in the container, where each process
                    is an array of values corresponding to the titles.
                example: '{"Processes":[["root","13642","882","0","17:03","pts/0","00:00:00","/bin/bash"],["root","13735","13642","0","17:06","pts/0","00:00:00","sleep 10"]]}'
                items:
                    items:
                        type: string
                    type: array
                type: array
            Titles:
                description: The ps column titles
                example: '{"Titles":["UID","PID","PPID","C","STIME","TTY","TIME","CMD"]}'
                items:
                    type: string
                type: array
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/api/handlers
    ContainersPruneReport:
        properties:
            ContainersDeleted:
                items:
                    type: string
                type: array
            SpaceReclaimed:
                format: uint64
                type: integer
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/api/handlers
    ContainersPruneReportLibpod:
        properties:
            Err:
                description: |-
                    Error which occurred during prune operation (if any).
                    This field is optional and may be omitted if no error occurred.
                type: string
                x-go-name: PruneError
                x-nullable: true
                x-omitempty: true
            Id:
                type: string
                x-go-name: ID
            Size:
                format: int64
                type: integer
                x-go-name: SpaceReclaimed
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/api/handlers
    CreateContainerConfig:
        description: CreateContainerConfig used when compatible endpoint creates a container
        properties:
            ArgsEscaped:
                type: boolean
            AttachStderr:
                type: boolean
            AttachStdin:
                type: boolean
            AttachStdout:
                type: boolean
            Cmd:
                items:
                    type: string
                type: array
            Domainname:
                type: string
            Entrypoint:
                items:
                    type: string
                type: array
            Env:
                items:
                    type: string
                type: array
            EnvMerge:
                items:
                    type: string
                type: array
            ExposedPorts:
                $ref: '#/definitions/PortSet'
            Healthcheck:
                $ref: '#/definitions/HealthConfig'
            HostConfig:
                $ref: '#/definitions/HostConfig'
            Hostname:
                type: string
            Image:
                type: string
            Labels:
                additionalProperties:
                    type: string
                type: object
            MacAddress:
                type: string
            Name:
                type: string
            NetworkDisabled:
                type: boolean
            NetworkingConfig:
                $ref: '#/definitions/NetworkingConfig'
            OnBuild:
                items:
                    type: string
                type: array
            OpenStdin:
                type: boolean
            Shell:
                items:
                    type: string
                type: array
            StdinOnce:
                type: boolean
            StopSignal:
                type: string
            StopTimeout:
                format: int64
                type: integer
            Tty:
                type: boolean
            UnsetEnv:
                items:
                    type: string
                type: array
            UnsetEnvAll:
                type: boolean
            User:
                type: string
            Volumes:
                additionalProperties:
                    type: object
                type: object
            WorkingDir:
                type: string
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/api/handlers
    CreateRequest:
        properties:
            Attachable:
                type: boolean
            ConfigFrom:
                $ref: '#/definitions/ConfigReference'
            ConfigOnly:
                type: boolean
            Driver:
                type: string
            EnableIPv4:
                type: boolean
            EnableIPv6:
                type: boolean
            IPAM:
                $ref: '#/definitions/IPAM'
            Ingress:
                type: boolean
            Internal:
                type: boolean
            Labels:
                additionalProperties:
                    type: string
                type: object
            Name:
                type: string
            Options:
                additionalProperties:
                    type: string
                type: object
            Scope:
                type: string
        title: CreateRequest is the request message sent to the server for network create call.
        type: object
        x-go-package: github.com/moby/moby/api/types/network
    DNSNetworkInfo:
        properties:
            package:
                type: string
                x-go-name: Package
            path:
                type: string
                x-go-name: Path
            version:
                type: string
                x-go-name: Version
        title: DNSNetworkInfo contains the DNS information.
        type: object
        x-go-package: go.podman.io/common/libnetwork/types
    Descriptor:
        description: |-
            This structure provides `application/vnd.oci.descriptor.v1+json` mediatype
            when marshalled to JSON.
        properties:
            annotations:
                additionalProperties:
                    type: string
                description: Annotations contains arbitrary metadata relating to the targeted content.
                type: object
                x-go-name: Annotations
            artifactType:
                description: ArtifactType is the IANA media type of this artifact.
                type: string
                x-go-name: ArtifactType
            data:
                description: |-
                    Data is an embedding of the targeted content. This is encoded as a base64
                    string when marshalled to JSON (automatically, by encoding/json). If
                    present, Data can be used directly to avoid fetching the targeted content.
                items:
                    format: uint8
                    type: integer
                type: array
                x-go-name: Data
            digest:
                $ref: '#/definitions/Digest'
            mediaType:
                description: MediaType is the media type of the object this schema refers to.
                type: string
                x-go-name: MediaType
            platform:
                $ref: '#/definitions/Platform'
            size:
                description: Size specifies the size in bytes of the blob.
                format: int64
                type: integer
                x-go-name: Size
            urls:
                description: URLs specifies a list of URLs from which this object MAY be downloaded
                items:
                    type: string
                type: array
                x-go-name: URLs
        title: Descriptor describes the disposition of targeted content.
        type: object
        x-go-package: github.com/opencontainers/image-spec/specs-go/v1
    DeviceMapping:
        properties:
            CgroupPermissions:
                type: string
            PathInContainer:
                type: string
            PathOnHost:
                type: string
        title: DeviceMapping represents the device mapping between the host and the container.
        type: object
        x-go-package: github.com/moby/moby/api/types/container
    DeviceRequest:
        description: Used by GPU device drivers.
        properties:
            Capabilities:
                items:
                    items:
                        type: string
                    type: array
                type: array
            Count:
                format: int64
                type: integer
            DeviceIDs:
                items:
                    type: string
                type: array
            Driver:
                type: string
            Options:
                additionalProperties:
                    type: string
                type: object
        title: DeviceRequest represents a request for devices from a device driver.
        type: object
        x-go-package: github.com/moby/moby/api/types/container
    Digest:
        description: |-
            The following is an example of the contents of Digest types:

            sha256:7173b809ca12ec5dee4506cd86be934c4596dd234ee82c0662eac04a8c2c71dc

            This allows to abstract the digest behind this type and work only in those
            terms.
        title: |-
            Digest allows simple protection of hex formatted digest strings, prefixed
            by their algorithm. Strings of type Digest have some guarantee of being in
            the correct format and it provides quick access to the components of a
            digest string.
        type: string
        x-go-package: github.com/opencontainers/go-digest
    DisconnectRequest:
        properties:
            Container:
                description: The ID or name of the container to disconnect from the network.
                example: 3613f73ba0e4
                type: string
            Force:
                description: Force the container to disconnect from the network.
                example: false
                type: boolean
        required:
            - Container
        title: DisconnectRequest NetworkDisconnectRequest represents the data to be used to disconnect a container from a network.
        type: object
        x-go-package: github.com/moby/moby/api/types/network
    DistributionInfo:
        description: DistributionInfo describes the host distribution for libpod
        properties:
            codename:
                type: string
                x-go-name: Codename
            distribution:
                type: string
                x-go-name: Distribution
            variant:
                type: string
                x-go-name: Variant
            version:
                type: string
                x-go-name: Version
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    DockerOCIImageConfig:
        properties:
            ArgsEscaped:
                description: |-
                    ArgsEscaped

                    Deprecated: This field is present only for legacy compatibility with
                    Docker and should not be used by new image builders.  It is used by Docker
                    for Windows images to indicate that the `Entrypoint` or `Cmd` or both,
                    contains only a single element array, that is a pre-escaped, and combined
                    into a single string `CommandLine`. If `true` the value in `Entrypoint` or
                    `Cmd` should be used as-is to avoid double escaping.
                    https://github.com/opencontainers/image-spec/pull/892
                type: boolean
            Cmd:
                description: Cmd defines the default arguments to the entrypoint of the container.
                items:
                    type: string
                type: array
            Entrypoint:
                description: Entrypoint defines a list of arguments to use as the command to execute when the container starts.
                items:
                    type: string
                type: array
            Env:
                description: Env is a list of environment variables to be used in a container.
                items:
                    type: string
                type: array
            ExposedPorts:
                additionalProperties:
                    type: object
                description: ExposedPorts a set of ports to expose from a container running this image.
                type: object
            Healthcheck:
                $ref: '#/definitions/HealthcheckConfig'
            Labels:
                additionalProperties:
                    type: string
                description: Labels contains arbitrary metadata for the container.
                type: object
            OnBuild:
                items:
                    type: string
                type: array
            Shell:
                items:
                    type: string
                type: array
            StopSignal:
                description: StopSignal contains the system call signal that will be sent to the container to exit.
                type: string
            User:
                description: User defines the username or UID which the process in the container should run as.
                type: string
            Volumes:
                additionalProperties:
                    type: object
                description: Volumes is a set of directories describing where the process is likely write data specific to a container instance.
                type: object
            WorkingDir:
                description: WorkingDir sets the current working directory of the entrypoint process in the container.
                type: string
        title: DockerOCIImageConfig is a ocispec.ImageConfig extended with Docker specific fields.
        type: object
        x-go-package: github.com/moby/docker-image-spec/specs-go/v1
    Driver:
        properties:
            Name:
                type: string
            Options:
                additionalProperties:
                    type: string
                type: object
        title: Driver represents a volume driver.
        type: object
        x-go-package: github.com/moby/moby/api/types/mount
    DriverData:
        description: DriverData handles the data for a storage driver
        properties:
            Data:
                additionalProperties:
                    type: string
                description: |-
                    Low-level storage metadata, provided as key/value pairs.

                    This information is driver-specific, and depends on the storage-driver
                    in use, and should be used for informational purposes only.
                example:
                    MergedDir: /var/lib/docker/overlay2/ef749362d13333e65fc95c572eb525abbe0052e16e086cb64bc3b98ae9aa6d74/merged
                    UpperDir: /var/lib/docker/overlay2/ef749362d13333e65fc95c572eb525abbe0052e16e086cb64bc3b98ae9aa6d74/diff
                    WorkDir: /var/lib/docker/overlay2/ef749362d13333e65fc95c572eb525abbe0052e16e086cb64bc3b98ae9aa6d74/work
                type: object
            Name:
                description: Name of the storage driver.
                example: overlay2
                type: string
        required:
            - Data
            - Name
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    Duration:
        description: |-
            A Duration represents the elapsed time between two instants
            as an int64 nanosecond count. The representation limits the
            largest representable duration to approximately 290 years.
        format: int64
        type: integer
        x-go-package: time
    EndpointIPAMConfig:
        description: EndpointIPAMConfig represents IPAM configurations for the endpoint
        properties:
            IPv4Address:
                type: string
                x-go-type: net/netip.Addr
            IPv6Address:
                type: string
                x-go-type: net/netip.Addr
            LinkLocalIPs:
                items:
                    type: string
                    x-go-type: net/netip.Addr
                type: array
        type: object
        x-go-package: github.com/moby/moby/api/types/network
    EndpointResource:
        properties:
            EndpointID:
                description: endpoint ID
                example: 628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a
                type: string
            IPv4Address:
                description: IPv4 address
                example: 172.19.0.2/16
                type: string
                x-go-type: net/netip.Prefix
            IPv6Address:
                description: IPv6 address
                type: string
                x-go-type: net/netip.Prefix
            MacAddress:
                description: mac address
                example: 02:42:ac:13:00:02
                type: string
                x-go-type: github.com/moby/moby/api/types/network.HardwareAddr
            Name:
                description: name
                example: container_1
                type: string
        title: EndpointResource contains network resources allocated and used for a container in a network.
        type: object
        x-go-package: github.com/moby/moby/api/types/network
    EndpointSettings:
        description: EndpointSettings stores the network endpoint details
        properties:
            Aliases:
                items:
                    type: string
                type: array
            DNSNames:
                description: |-
                    DNSNames holds all the (non fully qualified) DNS names associated to this
                    endpoint. The first entry is used to generate PTR records.
                items:
                    type: string
                type: array
            DriverOpts:
                additionalProperties:
                    type: string
                type: object
            EndpointID:
                type: string
            Gateway:
                type: string
                x-go-type: net/netip.Addr
            GlobalIPv6Address:
                type: string
                x-go-type: net/netip.Addr
            GlobalIPv6PrefixLen:
                format: int64
                type: integer
            GwPriority:
                description: |-
                    GwPriority determines which endpoint will provide the default gateway
                    for the container. The endpoint with the highest priority will be used.
                    If multiple endpoints have the same priority, they are lexicographically
                    sorted based on their network name, and the one that sorts first is picked.
                format: int64
                type: integer
            IPAMConfig:
                $ref: '#/definitions/EndpointIPAMConfig'
            IPAddress:
                type: string
                x-go-type: net/netip.Addr
            IPPrefixLen:
                format: int64
                type: integer
            IPv6Gateway:
                type: string
                x-go-type: net/netip.Addr
            Links:
                items:
                    type: string
                type: array
            MacAddress:
                description: |-
                    MacAddress may be used to specify a MAC address when the container is created.
                    Once the container is running, it becomes operational data (it may contain a
                    generated address).
                type: string
                x-go-type: github.com/moby/moby/api/types/network.HardwareAddr
            NetworkID:
                type: string
        type: object
        x-go-package: github.com/moby/moby/api/types/network
    ErrorModel:
        description: ErrorModel is used in remote connections with podman
        properties:
            cause:
                description: API root cause formatted for automated parsing
                example: API root cause
                type: string
                x-go-name: Because
            message:
                description: human error message, formatted for a human to read
                example: human error message
                type: string
                x-go-name: Message
            response:
                description: HTTP response code
                format: int64
                minimum: 400
                type: integer
                x-go-name: ResponseCode
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/errorhandling
    FileMode:
        description: |-
            The bits have the same definition on all systems, so that
            information about files can be moved from one system
            to another portably. Not all bits apply to all systems.
            The only required bit is [ModeDir] for directories.
        format: uint32
        title: A FileMode represents a file's mode and permission bits.
        type: integer
        x-go-package: os
    Health:
        description: Health stores information about the container's healthcheck results
        properties:
            FailingStreak:
                format: int64
                type: integer
            Log:
                items:
                    $ref: '#/definitions/HealthcheckResult'
                type: array
            Status:
                $ref: '#/definitions/HealthStatus'
        type: object
        x-go-package: github.com/moby/moby/api/types/container
    HealthCheckLog:
        description: HealthCheckLog describes the results of a single healthcheck
        properties:
            End:
                description: End time as a string
                type: string
            ExitCode:
                description: Exitcode is 0 or 1
                format: int64
                type: integer
            Output:
                description: Output is the stdout/stderr from the healthcheck command
                type: string
            Start:
                description: Start time as string
                type: string
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    HealthCheckOnFailureAction:
        description: |-
            HealthCheckOnFailureAction defines how Podman reacts when a container's health
            status turns unhealthy.
        format: int64
        type: integer
        x-go-package: go.podman.io/podman/v6/libpod/define
    HealthCheckResults:
        description: HealthCheckResults describes the results/logs from a healthcheck
        properties:
            FailingStreak:
                description: FailingStreak is the number of consecutive failed healthchecks
                format: int64
                type: integer
            Log:
                description: Log describes healthcheck attempts and results
                items:
                    $ref: '#/definitions/HealthCheckLog'
                type: array
            Status:
                description: Status starting, healthy or unhealthy
                type: string
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    HealthConfig:
        title: HealthConfig holds configuration settings for the HEALTHCHECK feature.
        type: object
        x-go-package: github.com/moby/moby/api/types/container
    HealthStatus:
        title: HealthStatus is a string representation of the container's health.
        type: string
        x-go-package: github.com/moby/moby/api/types/container
    HealthSummary:
        properties:
            FailingStreak:
                format: int64
                type: integer
            Status:
                $ref: '#/definitions/HealthStatus'
        title: HealthSummary stores a summary of the container's healthcheck results.
        type: object
        x-go-package: github.com/moby/moby/api/types/container
    HealthcheckConfig:
        properties:
            Interval:
                $ref: '#/definitions/Duration'
            Retries:
                description: |-
                    Retries is the number of consecutive failures needed to consider a container as unhealthy.
                    Zero means inherit.
                format: int64
                type: integer
            StartInterval:
                $ref: '#/definitions/Duration'
            StartPeriod:
                $ref: '#/definitions/Duration'
            Test:
                description: |-
                    Test is the test to perform to check that the container is healthy.
                    An empty slice means to inherit the default.
                    The options are:
                    {} : inherit healthcheck
                    {"NONE"} : disable healthcheck
                    {"CMD", args...} : exec arguments directly
                    {"CMD-SHELL", command} : run command with system's default shell
                items:
                    type: string
                type: array
            Timeout:
                $ref: '#/definitions/Duration'
        title: HealthcheckConfig holds configuration settings for the HEALTHCHECK feature.
        type: object
        x-go-package: github.com/moby/docker-image-spec/specs-go/v1
    HealthcheckResult:
        description: HealthcheckResult stores information about a single run of a healthcheck probe
        properties:
            End:
                format: date-time
                type: string
            ExitCode:
                format: int64
                type: integer
            Output:
                type: string
            Start:
                format: date-time
                type: string
        type: object
        x-go-package: github.com/moby/moby/api/types/container
    History:
        properties:
            author:
                description: Author is the author of the build point.
                type: string
                x-go-name: Author
            comment:
                description: Comment is a custom message set when creating the layer.
                type: string
                x-go-name: Comment
            created:
                description: Created is the combined date and time at which the layer was created, formatted as defined by RFC 3339, section 5.6.
                format: date-time
                type: string
                x-go-name: Created
            created_by:
                description: CreatedBy is the command which created the layer.
                type: string
                x-go-name: CreatedBy
            empty_layer:
                description: EmptyLayer is used to mark if the history item created a filesystem diff.
                type: boolean
                x-go-name: EmptyLayer
        title: History describes the history of a layer.
        type: object
        x-go-package: github.com/opencontainers/image-spec/specs-go/v1
    HistoryResponse:
        description: HistoryResponse provides details on image layers
        properties:
            Comment:
                type: string
            Created:
                format: int64
                type: integer
            CreatedBy:
                type: string
            Id:
                type: string
                x-go-name: ID
            Size:
                format: int64
                type: integer
            Tags:
                items:
                    type: string
                type: array
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/api/handlers
    HostConfig:
        description: |-
            Here, "non-portable" means "dependent of the host we are running on".
            Portable information *should* appear in Config.
        properties:
            Annotations:
                additionalProperties:
                    type: string
                type: object
            AutoRemove:
                type: boolean
            Binds:
                description: Applicable to all platforms
                items:
                    type: string
                type: array
            BlkioDeviceReadBps:
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            BlkioDeviceReadIOps:
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            BlkioDeviceWriteBps:
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            BlkioDeviceWriteIOps:
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            BlkioWeight:
                format: uint16
                type: integer
            BlkioWeightDevice:
                items:
                    $ref: '#/definitions/WeightDevice'
                type: array
            CapAdd:
                description: Applicable to UNIX platforms
                items:
                    type: string
                type: array
            CapDrop:
                items:
                    type: string
                type: array
            Cgroup:
                $ref: '#/definitions/CgroupSpec'
            CgroupParent:
                description: Applicable to UNIX platforms
                type: string
            CgroupnsMode:
                $ref: '#/definitions/CgroupnsMode'
            ConsoleSize:
                items:
                    format: uint64
                    type: integer
                type: array
            ContainerIDFile:
                type: string
            CpuCount:
                description: Applicable to Windows
                format: int64
                type: integer
                x-go-name: CPUCount
            CpuPercent:
                format: int64
                type: integer
                x-go-name: CPUPercent
            CpuPeriod:
                format: int64
                type: integer
                x-go-name: CPUPeriod
            CpuQuota:
                format: int64
                type: integer
                x-go-name: CPUQuota
            CpuRealtimePeriod:
                format: int64
                type: integer
                x-go-name: CPURealtimePeriod
            CpuRealtimeRuntime:
                format: int64
                type: integer
                x-go-name: CPURealtimeRuntime
            CpuShares:
                description: Applicable to all platforms
                format: int64
                type: integer
                x-go-name: CPUShares
            CpusetCpus:
                type: string
            CpusetMems:
                type: string
            DeviceCgroupRules:
                items:
                    type: string
                type: array
            DeviceRequests:
                items:
                    $ref: '#/definitions/DeviceRequest'
                type: array
            Devices:
                items:
                    $ref: '#/definitions/DeviceMapping'
                type: array
            Dns:
                items:
                    type: string
                    x-go-type: net/netip.Addr
                type: array
                x-go-name: DNS
            DnsOptions:
                items:
                    type: string
                type: array
                x-go-name: DNSOptions
            DnsSearch:
                items:
                    type: string
                type: array
                x-go-name: DNSSearch
            ExtraHosts:
                items:
                    type: string
                type: array
            GroupAdd:
                items:
                    type: string
                type: array
            IOMaximumBandwidth:
                format: uint64
                type: integer
            IOMaximumIOps:
                format: uint64
                type: integer
            Init:
                description: Run a custom init inside the container, if null, use the daemon's configured settings
                type: boolean
            IpcMode:
                $ref: '#/definitions/IpcMode'
            Isolation:
                $ref: '#/definitions/Isolation'
            Links:
                items:
                    type: string
                type: array
            LogConfig:
                $ref: '#/definitions/LogConfig'
            MaskedPaths:
                description: MaskedPaths is the list of paths to be masked inside the container (this overrides the default set of paths)
                items:
                    type: string
                type: array
            Memory:
                format: int64
                type: integer
            MemoryReservation:
                format: int64
                type: integer
            MemorySwap:
                format: int64
                type: integer
            MemorySwappiness:
                format: int64
                type: integer
            Mounts:
                description: Mounts specs used by the container
                items:
                    $ref: '#/definitions/Mount'
                type: array
            NanoCpus:
                format: int64
                type: integer
                x-go-name: NanoCPUs
            NetworkMode:
                $ref: '#/definitions/NetworkMode'
            OomKillDisable:
                type: boolean
            OomScoreAdj:
                format: int64
                type: integer
            PidMode:
                $ref: '#/definitions/PidMode'
            PidsLimit:
                format: int64
                type: integer
            PortBindings:
                $ref: '#/definitions/PortMap'
            Privileged:
                type: boolean
            PublishAllPorts:
                type: boolean
            ReadonlyPaths:
                description: ReadonlyPaths is the list of paths to be set as read-only inside the container (this overrides the default set of paths)
                items:
                    type: string
                type: array
            ReadonlyRootfs:
                type: boolean
            RestartPolicy:
                $ref: '#/definitions/RestartPolicy'
            Runtime:
                type: string
            SecurityOpt:
                items:
                    type: string
                type: array
            ShmSize:
                format: int64
                type: integer
            StorageOpt:
                additionalProperties:
                    type: string
                type: object
            Sysctls:
                additionalProperties:
                    type: string
                type: object
            Tmpfs:
                additionalProperties:
                    type: string
                type: object
            UTSMode:
                $ref: '#/definitions/UTSMode'
            Ulimits:
                items:
                    $ref: '#/definitions/Ulimit'
                type: array
            UsernsMode:
                $ref: '#/definitions/UsernsMode'
            VolumeDriver:
                type: string
            VolumesFrom:
                items:
                    type: string
                type: array
        title: HostConfig the non-portable Config structure of a container.
        type: object
        x-go-package: github.com/moby/moby/api/types/container
    HostInfo:
        description: HostInfo describes the libpod host
        properties:
            arch:
                type: string
                x-go-name: Arch
            buildahVersion:
                type: string
                x-go-name: BuildahVersion
            cgroupControllers:
                items:
                    type: string
                type: array
                x-go-name: CgroupControllers
            cgroupManager:
                type: string
                x-go-name: CgroupManager
            cgroupVersion:
                type: string
                x-go-name: CgroupsVersion
            conmon:
                $ref: '#/definitions/ConmonInfo'
            cpuUtilization:
                $ref: '#/definitions/CPUUsage'
            cpus:
                format: int64
                type: integer
                x-go-name: CPUs
            databaseBackend:
                type: string
                x-go-name: DatabaseBackend
            distribution:
                $ref: '#/definitions/DistributionInfo'
            emulatedArchitectures:
                items:
                    type: string
                type: array
                x-go-name: EmulatedArchitectures
            eventLogger:
                type: string
                x-go-name: EventLogger
            freeLocks:
                format: uint32
                type: integer
                x-go-name: FreeLocks
            hostname:
                type: string
                x-go-name: Hostname
            idMappings:
                $ref: '#/definitions/IDMappings'
            kernel:
                type: string
                x-go-name: Kernel
            linkmode:
                type: string
                x-go-name: Linkmode
            logDriver:
                type: string
                x-go-name: LogDriver
            memFree:
                format: int64
                type: integer
                x-go-name: MemFree
            memTotal:
                format: int64
                type: integer
                x-go-name: MemTotal
            networkBackend:
                type: string
                x-go-name: NetworkBackend
            networkBackendInfo:
                $ref: '#/definitions/NetworkInfo'
            ociRuntime:
                $ref: '#/definitions/OCIRuntimeInfo'
            os:
                type: string
                x-go-name: OS
            pasta:
                $ref: '#/definitions/PastaInfo'
            remoteSocket:
                $ref: '#/definitions/RemoteSocket'
            rootlessNetworkCmd:
                description: RootlessNetworkCmd returns the default rootless network command (pasta)
                type: string
                x-go-name: RootlessNetworkCmd
            runtimeInfo:
                additionalProperties: {}
                type: object
                x-go-name: RuntimeInfo
            security:
                $ref: '#/definitions/SecurityInfo'
            serviceIsRemote:
                description: ServiceIsRemote is true when the podman/libpod service is remote to the client
                type: boolean
                x-go-name: ServiceIsRemote
            swapFree:
                format: int64
                type: integer
                x-go-name: SwapFree
            swapTotal:
                format: int64
                type: integer
                x-go-name: SwapTotal
            uptime:
                type: string
                x-go-name: Uptime
            variant:
                type: string
                x-go-name: Variant
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    IDMap:
        description: |-
            IDMap contains a single entry for user namespace range remapping. An array
            of IDMap entries represents the structure that will be provided to the Linux
            kernel for creating a user namespace.
        properties:
            container_id:
                format: int64
                type: integer
                x-go-name: ContainerID
            host_id:
                format: int64
                type: integer
                x-go-name: HostID
            size:
                format: int64
                type: integer
                x-go-name: Size
        type: object
        x-go-package: go.podman.io/storage/pkg/idtools
    IDMappingOptions:
        description: |-
            IDMappingOptions are used for specifying how ID mapping should be set up for
            a layer or container.
        properties:
            AutoUserNs:
                type: boolean
            AutoUserNsOpts:
                $ref: '#/definitions/AutoUserNsOptions'
            GIDMap:
                items:
                    $ref: '#/definitions/IDMap'
                type: array
            HostGIDMapping:
                type: boolean
            HostUIDMapping:
                description: |-
                    UIDMap and GIDMap are used for setting up a layer's root filesystem
                    for use inside of a user namespace where ID mapping is being used.
                    If HostUIDMapping/HostGIDMapping is true, no mapping of the
                    respective type will be used.  Otherwise, if UIDMap and/or GIDMap
                    contain at least one mapping, one or both will be used.  By default,
                    if neither of those conditions apply, if the layer has a parent
                    layer, the parent layer's mapping will be used, and if it does not
                    have a parent layer, the mapping which was passed to the Store
                    object when it was initialized will be used.
                type: boolean
            UIDMap:
                items:
                    $ref: '#/definitions/IDMap'
                type: array
        type: object
        x-go-package: go.podman.io/storage/types
    IDMappings:
        description: IDMappings describe the GID and UID mappings
        properties:
            gidmap:
                items:
                    $ref: '#/definitions/IDMap'
                type: array
                x-go-name: GIDMap
            uidmap:
                items:
                    $ref: '#/definitions/IDMap'
                type: array
                x-go-name: UIDMap
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    IDResponse:
        properties:
            Id:
                description: The id of the newly created object.
                type: string
                x-go-name: ID
        required:
            - Id
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities/types
    IPAM:
        description: IPAM represents IP Address Management
        properties:
            Config:
                items:
                    $ref: '#/definitions/IPAMConfig'
                type: array
            Driver:
                type: string
            Options:
                additionalProperties:
                    type: string
                type: object
        type: object
        x-go-package: github.com/moby/moby/api/types/network
    IPAMConfig:
        description: IPAMConfig represents IPAM configurations
        properties:
            AuxiliaryAddresses:
                additionalProperties:
                    type: string
                    x-go-type: net/netip.Addr
                type: object
                x-go-name: AuxAddress
            Gateway:
                type: string
                x-go-type: net/netip.Addr
            IPRange:
                type: string
                x-go-type: net/netip.Prefix
            Subnet:
                type: string
                x-go-type: net/netip.Prefix
        type: object
        x-go-package: github.com/moby/moby/api/types/network
    IPAMStatus:
        description: IPAMStatus IPAM status
        properties:
            Subnets:
                $ref: '#/definitions/SubnetStatuses'
        type: object
        x-go-package: github.com/moby/moby/api/types/network
    IPMask:
        description: See type [IPNet] and func [ParseCIDR] for details.
        items:
            format: uint8
            type: integer
        title: |-
            An IPMask is a bitmask that can be used to manipulate
            IP addresses for IP addressing and routing.
        type: array
        x-go-package: net
    IPNet:
        properties:
            IP:
                type: string
                x-go-type: net.IP
            Mask:
                $ref: '#/definitions/IPMask'
        title: An IPNet represents an IP network.
        type: object
        x-go-package: net
    Identity:
        description: |-
            This is trusted information verified by the daemon and cannot be modified
            by tagging an image to a different name.
        properties:
            Build:
                description: Build contains build reference information if image was created via build.
                items:
                    $ref: '#/definitions/BuildIdentity'
                type: array
            Pull:
                description: |-
                    Pull contains remote location information if image was created via pull.
                    If image was pulled via mirror, this contains the original repository location.
                    After successful push this images also contains the pushed repository location.
                items:
                    $ref: '#/definitions/PullIdentity'
                type: array
            Signature:
                description: Signature contains the properties of verified signatures for the image.
                items:
                    $ref: '#/definitions/SignatureIdentity'
                type: array
        title: Identity holds information about the identity and origin of the image.
        type: object
        x-go-package: github.com/moby/moby/api/types/image
    ImageConfig:
        properties:
            ArgsEscaped:
                description: |-
                    ArgsEscaped

                    Deprecated: This field is present only for legacy compatibility with
                    Docker and should not be used by new image builders.  It is used by Docker
                    for Windows images to indicate that the `Entrypoint` or `Cmd` or both,
                    contains only a single element array, that is a pre-escaped, and combined
                    into a single string `CommandLine`. If `true` the value in `Entrypoint` or
                    `Cmd` should be used as-is to avoid double escaping.
                    https://github.com/opencontainers/image-spec/pull/892
                type: boolean
            Cmd:
                description: Cmd defines the default arguments to the entrypoint of the container.
                items:
                    type: string
                type: array
            Entrypoint:
                description: Entrypoint defines a list of arguments to use as the command to execute when the container starts.
                items:
                    type: string
                type: array
            Env:
                description: Env is a list of environment variables to be used in a container.
                items:
                    type: string
                type: array
            ExposedPorts:
                additionalProperties:
                    type: object
                description: ExposedPorts a set of ports to expose from a container running this image.
                type: object
            Labels:
                additionalProperties:
                    type: string
                description: Labels contains arbitrary metadata for the container.
                type: object
            StopSignal:
                description: StopSignal contains the system call signal that will be sent to the container to exit.
                type: string
            User:
                description: User defines the username or UID which the process in the container should run as.
                type: string
            Volumes:
                additionalProperties:
                    type: object
                description: Volumes is a set of directories describing where the process is likely write data specific to a container instance.
                type: object
            WorkingDir:
                description: WorkingDir sets the current working directory of the entrypoint process in the container.
                type: string
        title: ImageConfig defines the execution parameters which should be used as a base when running a container using an image.
        type: object
        x-go-package: github.com/opencontainers/image-spec/specs-go/v1
    ImageData:
        properties:
            Annotations:
                additionalProperties:
                    type: string
                type: object
            Architecture:
                type: string
            Author:
                type: string
            Comment:
                type: string
            Config:
                $ref: '#/definitions/ImageConfig'
            Created:
                format: date-time
                type: string
            Digest:
                $ref: '#/definitions/Digest'
            GraphDriver:
                $ref: '#/definitions/DriverData'
            Healthcheck:
                $ref: '#/definitions/Schema2HealthConfig'
            History:
                items:
                    $ref: '#/definitions/History'
                type: array
            Id:
                type: string
                x-go-name: ID
            Labels:
                additionalProperties:
                    type: string
                type: object
            ManifestType:
                type: string
            NamesHistory:
                items:
                    type: string
                type: array
            Os:
                type: string
            Parent:
                type: string
            RepoDigests:
                items:
                    type: string
                type: array
            RepoTags:
                items:
                    type: string
                type: array
            RootFS:
                $ref: '#/definitions/RootFS'
            Size:
                format: int64
                type: integer
            User:
                type: string
            Version:
                type: string
            VirtualSize:
                format: int64
                type: integer
        title: ImageData holds the inspect information of an image.
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/inspect
    ImageImportReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ImageInspect:
        properties:
            Architecture:
                description: Architecture is the hardware CPU architecture that the image runs on.
                type: string
            Author:
                description: |-
                    Author is the name of the author that was specified when committing the
                    image, or as specified through MAINTAINER (deprecated) in the Dockerfile.
                    This field is omitted if not set.
                type: string
            Comment:
                description: |-
                    Comment is an optional message that can be set when committing or
                    importing the image. This field is omitted if not set.
                type: string
            Config:
                $ref: '#/definitions/DockerOCIImageConfig'
            Container:
                description: |-
                    When you embed a struct, the fields of the embedded struct are "promoted" to the outer struct.
                    If a field in the outer struct has the same name as a field in the embedded struct,
                    the outer struct's field will shadow or override the embedded one allowing for a clean way to
                    hide fields from the swagger spec that still exist in the libraries struct.
                type: string
            ContainerConfig:
                $ref: '#/definitions/Config'
            Created:
                description: |-
                    Created is the date and time at which the image was created, formatted in
                    RFC 3339 nano-seconds (time.RFC3339Nano).

                    This information is only available if present in the image,
                    and omitted otherwise.
                type: string
            Descriptor:
                $ref: '#/definitions/Descriptor'
            DockerVersion:
                type: string
            GraphDriver:
                $ref: '#/definitions/DriverData'
            Id:
                description: |-
                    ID is the content-addressable ID of an image.

                    This identifier is a content-addressable digest calculated from the
                    image's configuration (which includes the digests of layers used by
                    the image).

                    Note that this digest differs from the `RepoDigests` below, which
                    holds digests of image manifests that reference the image.
                type: string
                x-go-name: ID
            Identity:
                $ref: '#/definitions/Identity'
            Manifests:
                description: |-
                    Manifests is a list of image manifests available in this image. It
                    provides a more detailed view of the platform-specific image manifests or
                    other image-attached data like build attestations.

                    Only available if the daemon provides a multi-platform image store, the client
                    requests manifests AND does not request a specific platform.

                    WARNING: This is experimental and may change at any time without any backward
                    compatibility.
                items:
                    $ref: '#/definitions/ManifestSummary'
                type: array
            Metadata:
                $ref: '#/definitions/Metadata'
            Os:
                description: OS is the Operating System the image is built to run on.
                type: string
            OsVersion:
                description: |-
                    OsVersion is the version of the Operating System the image is built to
                    run on (especially for Windows).
                type: string
            Parent:
                type: string
            RepoDigests:
                description: |-
                    RepoDigests is a list of content-addressable digests of locally available
                    image manifests that the image is referenced from. Multiple manifests can
                    refer to the same image.

                    These digests are usually only available if the image was either pulled
                    from a registry, or if the image was pushed to a registry, which is when
                    the manifest is generated and its digest calculated.
                items:
                    type: string
                type: array
            RepoTags:
                description: |-
                    RepoTags is a list of image names/tags in the local image cache that
                    reference this image.

                    Multiple image tags can refer to the same image, and this list may be
                    empty if no tags reference the image, in which case the image is
                    "untagged", in which case it can still be referenced by its ID.
                items:
                    type: string
                type: array
            RootFS:
                $ref: '#/definitions/RootFS'
            Size:
                description: Size is the total size of the image including all layers it is composed of.
                format: int64
                type: integer
            Variant:
                description: Variant is the CPU architecture variant (presently ARM-only).
                type: string
            VirtualSize:
                format: int64
                type: integer
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/api/handlers
    ImageLoadReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ImageOptions:
        properties:
            Subpath:
                type: string
        type: object
        x-go-package: github.com/moby/moby/api/types/mount
    ImageProperties:
        properties:
            Containers:
                description: |-
                    Containers is an array containing the IDs of the containers that are
                    using this image.
                items:
                    type: string
                type: array
            Identity:
                $ref: '#/definitions/Identity'
            Platform:
                $ref: '#/definitions/Platform'
            Size:
                properties:
                    Unpacked:
                        description: |-
                            Unpacked is the size (in bytes) of the locally unpacked
                            (uncompressed) image content that's directly usable by the containers
                            running this image.
                            It's independent of the distributable content - e.g.
                            the image might still have an unpacked data that's still used by
                            some container even when the distributable/compressed content is
                            already gone.
                        format: int64
                        type: integer
                required:
                    - Unpacked
                type: object
        required:
            - Platform
            - Containers
        type: object
        x-go-package: github.com/moby/moby/api/types/image
    ImagePullReport:
        title: ImagePullReport is the response from pulling one or more images.
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ImageRemoveReport:
        description: |-
            ImageRemoveReport is the response for removing one or more image(s) from storage
            and images what was untagged vs actually removed.
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ImageStore:
        description: |-
            ImageStore describes the image store.  Right now only the number
            of images present
        properties:
            number:
                format: int64
                type: integer
                x-go-name: Number
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    ImageSummary:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ImageTreeReport:
        description: ImageTreeReport provides results from ImageEngine.Tree()
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ImageVolume:
        description: |-
            ImageVolume is a volume based on a container image.  The container image is
            first mounted on the host and is then bind-mounted into the container.  An
            ImageVolume is always mounted read-only.
        properties:
            Destination:
                description: Destination is the absolute path of the mount in the container.
                type: string
            ReadWrite:
                description: ReadWrite sets the volume writable.
                type: boolean
            Source:
                description: |-
                    Source is the source of the image volume.  The image can be referred
                    to by name and by ID.
                type: string
            subPath:
                description: |-
                    SubPath mounts a particular path within the image.
                    If empty, the whole image is mounted.
                type: string
                x-go-name: SubPath
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    Info:
        description: |-
            Info contains information about the Volume as a whole as provided by
            the CSI storage plugin.
        properties:
            AccessibleTopology:
                description: |-
                    AccessibleTopology is the topology this volume is actually accessible
                    from.
                items:
                    $ref: '#/definitions/Topology'
                type: array
            CapacityBytes:
                description: |-
                    CapacityBytes is the capacity of the volume in bytes. A value of 0
                    indicates that the capacity is unknown.
                format: int64
                type: integer
            VolumeContext:
                additionalProperties:
                    type: string
                description: |-
                    VolumeContext is the context originating from the CSI storage plugin
                    when the Volume is created.
                type: object
            VolumeID:
                description: |-
                    VolumeID is the ID of the Volume as seen by the CSI storage plugin. This
                    is distinct from the Volume's Swarm ID, which is the ID used by all of
                    the Docker Engine to refer to the Volume. If this field is blank, then
                    the Volume has not been successfully created yet.
                type: string
        type: object
        x-go-package: github.com/moby/moby/api/types/volume
    Inspect:
        properties:
            Attachable:
                description: |-
                    Whether a global / swarm scope network is manually attachable by regular
                    containers from workers in swarm mode.
                example: false
                type: boolean
            ConfigFrom:
                $ref: '#/definitions/ConfigReference'
            ConfigOnly:
                description: |-
                    Whether the network is a config-only network. Config-only networks are
                    placeholder networks for network configurations to be used by other
                    networks. Config-only networks cannot be used directly to run containers
                    or services.
                type: boolean
            Containers:
                additionalProperties:
                    $ref: '#/definitions/EndpointResource'
                description: Contains endpoints attached to the network.
                example:
                    19a4d5d687db25203351ed79d478946f861258f018fe384f229f2efa4b23513c:
                        EndpointID: 628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a
                        IPv4Address: 172.19.0.2/16
                        IPv6Address: ""
                        MacAddress: 02:42:ac:13:00:02
                        Name: test
                type: object
            Created:
                description: |-
                    Date and time at which the network was created in
                    [RFC 3339](https://www.ietf.org/rfc/rfc3339.txt) format with nano-seconds.
                example: "2016-10-19T04:33:30.360899459Z"
                format: date-time
                type: string
            Driver:
                description: |-
                    The name of the driver used to create the network (e.g. `bridge`,
                    `overlay`).
                example: overlay
                type: string
            EnableIPv4:
                description: Whether the network was created with IPv4 enabled.
                example: true
                type: boolean
            EnableIPv6:
                description: Whether the network was created with IPv6 enabled.
                example: false
                type: boolean
            IPAM:
                $ref: '#/definitions/IPAM'
            Id:
                description: ID that uniquely identifies a network on a single machine.
                example: 7d86d31b1478e7cca9ebed7e73aa0fdeec46c5ca29497431d3007d2d9e15ed99
                type: string
                x-go-name: ID
            Ingress:
                description: Whether the network is providing the routing-mesh for the swarm cluster.
                example: false
                type: boolean
            Internal:
                description: |-
                    Whether the network is created to only allow internal networking
                    connectivity.
                example: false
                type: boolean
            Labels:
                additionalProperties:
                    type: string
                description: Metadata specific to the network being created.
                example:
                    com.example.some-label: some-value
                    com.example.some-other-label: some-other-value
                type: object
            Name:
                description: Name of the network.
                example: my_network
                type: string
            Options:
                additionalProperties:
                    type: string
                description: Network-specific options uses when creating the network.
                example:
                    com.docker.network.bridge.default_bridge: "true"
                    com.docker.network.bridge.enable_icc: "true"
                    com.docker.network.bridge.enable_ip_masquerade: "true"
                    com.docker.network.bridge.host_binding_ipv4: 0.0.0.0
                    com.docker.network.bridge.name: docker0
                    com.docker.network.driver.mtu: "1500"
                type: object
            Peers:
                description: |-
                    List of peer nodes for an overlay network. This field is only present
                    for overlay networks, and omitted for other network types.
                items:
                    $ref: '#/definitions/PeerInfo'
                type: array
            Scope:
                description: |-
                    The level at which the network exists (e.g. `swarm` for cluster-wide
                    or `local` for machine level)
                example: local
                type: string
            Services:
                additionalProperties:
                    $ref: '#/definitions/ServiceInfo'
                description: |-
                    List of services using the network. This field is only present for
                    swarm scope networks, and omitted for local scope networks.
                type: object
            Status:
                $ref: '#/definitions/Status'
        title: Inspect The body of the "get network" http response message.
        type: object
        x-go-package: github.com/moby/moby/api/types/network
    InspectAdditionalNetwork:
        description: |-
            InspectAdditionalNetwork holds information about non-default networks the
            container has been connected to.
            As with InspectNetworkSettings, many fields are unused and maintained only
            for compatibility with Docker.
        properties:
            AdditionalMACAddresses:
                description: |-
                    AdditionalMacAddresses is a set of additional MAC Addresses beyond
                    the first. The network backend may configure more than one interface
                    for a single network, which can cause this.
                items:
                    type: string
                type: array
                x-go-name: AdditionalMacAddresses
            Aliases:
                description: Aliases are any network aliases the container has in this network.
                items:
                    type: string
                type: array
            DriverOpts:
                additionalProperties:
                    type: string
                description: |-
                    DriverOpts is presently unused and maintained exclusively for
                    compatibility.
                type: object
            EndpointID:
                description: EndpointID is unused, maintained exclusively for compatibility.
                type: string
            Gateway:
                description: Gateway is the IP address of the gateway this network will use.
                type: string
            GlobalIPv6Address:
                description: GlobalIPv6Address is the global-scope IPv6 Address for this network.
                type: string
            GlobalIPv6PrefixLen:
                description: GlobalIPv6PrefixLen is the length of the subnet mask of this network.
                format: int64
                type: integer
            IPAMConfig:
                additionalProperties:
                    type: string
                description: |-
                    IPAMConfig is presently unused and maintained exclusively for
                    compatibility.
                type: object
            IPAddress:
                description: IPAddress is the IP address for this network.
                type: string
            IPPrefixLen:
                description: IPPrefixLen is the length of the subnet mask of this network.
                format: int64
                type: integer
            IPv6Gateway:
                description: IPv6Gateway is the IPv6 gateway this network will use.
                type: string
            Links:
                description: |-
                    Links is presently unused and maintained exclusively for
                    compatibility.
                items:
                    type: string
                type: array
            MacAddress:
                description: MacAddress is the MAC address for the interface in this network.
                type: string
            NetworkID:
                description: Name of the network we're connecting to.
                type: string
            SecondaryIPAddresses:
                description: |-
                    SecondaryIPAddresses is a list of extra IP Addresses that the
                    container has been assigned in this network.
                items:
                    $ref: '#/definitions/Address'
                type: array
            SecondaryIPv6Addresses:
                description: |-
                    SecondaryIPv6Addresses is a list of extra IPv6 Addresses that the
                    container has been assigned in this network.
                items:
                    $ref: '#/definitions/Address'
                type: array
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectBlkioThrottleDevice:
        description: |-
            InspectBlkioThrottleDevice holds information about a speed cap for a device
            node. This cap applies to a specific operation (read, write, etc) on the given
            node.
        properties:
            Path:
                description: Path is the path to the device this applies to.
                type: string
            Rate:
                description: |-
                    Rate is the maximum rate. It is in either bytes per second or iops
                    per second, determined by where it is used - documentation will
                    indicate which is appropriate.
                format: uint64
                type: integer
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectBlkioWeightDevice:
        description: |-
            InspectBlkioWeightDevice holds information about the relative weight
            of an individual device node. Weights are used in the I/O scheduler to give
            relative priority to some accesses.
        properties:
            Path:
                description: Path is the path to the device this applies to.
                type: string
            Weight:
                description: |-
                    Weight is the relative weight the scheduler will use when scheduling
                    I/O.
                format: uint16
                type: integer
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectContainerConfig:
        description: |-
            InspectContainerConfig holds further data about how a container was initially
            configured.
        properties:
            Annotations:
                additionalProperties:
                    type: string
                description: Container annotations
                type: object
            AttachStderr:
                description: Unused, at present
                type: boolean
            AttachStdin:
                description: Unused, at present
                type: boolean
            AttachStdout:
                description: Unused, at present
                type: boolean
            ChrootDirs:
                description: |-
                    ChrootDirs is an additional set of directories that need to be
                    treated as root directories. Standard bind mounts will be mounted
                    into paths relative to these directories.
                items:
                    type: string
                type: array
            Cmd:
                description: Container command
                items:
                    type: string
                type: array
            CreateCommand:
                description: |-
                    CreateCommand is the full command plus arguments of the process the
                    container has been created with.
                items:
                    type: string
                type: array
            Domainname:
                description: Container domain name - unused at present
                type: string
                x-go-name: DomainName
            Entrypoint:
                description: Container entrypoint
                items:
                    type: string
                type: array
            Env:
                description: Container environment variables
                items:
                    type: string
                type: array
            ExposedPorts:
                additionalProperties:
                    type: object
                description: ExposedPorts includes ports the container has exposed.
                type: object
            HealthLogDestination:
                description: HealthLogDestination defines the destination where the log is stored
                type: string
            Healthcheck:
                $ref: '#/definitions/Schema2HealthConfig'
            HealthcheckMaxLogCount:
                description: |-
                    HealthMaxLogCount is maximum number of attempts in the HealthCheck log file.
                    ('0' value means an infinite number of attempts in the log file)
                format: uint64
                type: integer
                x-go-name: HealthMaxLogCount
            HealthcheckMaxLogSize:
                description: |-
                    HealthMaxLogSize is the maximum length in characters of stored HealthCheck log
                    ("0" value means an infinite log length)
                format: uint64
                type: integer
                x-go-name: HealthMaxLogSize
            HealthcheckOnFailureAction:
                description: HealthcheckOnFailureAction defines an action to take once the container turns unhealthy.
                type: string
            Hostname:
                description: Container hostname
                type: string
            Image:
                description: Container image
                type: string
            Labels:
                additionalProperties:
                    type: string
                description: Container labels
                type: object
            OnBuild:
                description: On-build arguments - presently unused. More of Buildah's domain.
                type: string
            OpenStdin:
                description: Whether the container leaves STDIN open
                type: boolean
            Passwd:
                description: Passwd determines whether or not podman can add entries to /etc/passwd and /etc/group
                type: boolean
            Secrets:
                description: Secrets are the secrets mounted in the container
                items:
                    $ref: '#/definitions/InspectSecret'
                type: array
            StartupHealthCheck:
                $ref: '#/definitions/StartupHealthCheck'
            StdinOnce:
                description: |-
                    Whether STDIN is only left open once.
                    Presently not supported by Podman, unused.
                type: boolean
            StopSignal:
                description: Container stop signal
                type: string
            StopTimeout:
                description: StopTimeout is time before container is stopped when calling stop
                format: uint64
                type: integer
            SystemdMode:
                description: |-
                    SystemdMode is whether the container is running in systemd mode. In
                    systemd mode, the container configuration is customized to optimize
                    running systemd in the container.
                type: boolean
            Timeout:
                description: Timeout is time before container is killed by conmon
                format: uint64
                type: integer
            Timezone:
                description: |-
                    Timezone is the timezone inside the container.
                    Local means it has the same timezone as the host machine
                type: string
            Tty:
                description: Whether the container creates a TTY
                type: boolean
            Umask:
                description: Umask is the umask inside the container.
                type: string
            User:
                description: User the container was launched with
                type: string
            Volumes:
                additionalProperties:
                    type: object
                description: Unused, at present. I've never seen this field populated.
                type: object
            WorkingDir:
                description: Container working directory
                type: string
            sdNotifyMode:
                description: SdNotifyMode is the sd-notify mode of the container.
                type: string
                x-go-name: SdNotifyMode
            sdNotifySocket:
                description: SdNotifySocket is the NOTIFY_SOCKET in use by/configured for the container.
                type: string
                x-go-name: SdNotifySocket
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectContainerData:
        description: |-
            InspectContainerData provides a detailed record of a container's configuration
            and state as viewed by Libpod.
            Large portions of this structure are defined such that the output is
            compatible with `docker inspect` JSON, but additional fields have been added
            as required to share information not in the original output.
        properties:
            AppArmorProfile:
                type: string
            Args:
                items:
                    type: string
                type: array
            BoundingCaps:
                items:
                    type: string
                type: array
            Config:
                $ref: '#/definitions/InspectContainerConfig'
            ConmonPidFile:
                type: string
            Created:
                format: date-time
                type: string
            Dependencies:
                items:
                    type: string
                type: array
            Driver:
                type: string
            EffectiveCaps:
                items:
                    type: string
                type: array
            ExecIDs:
                items:
                    type: string
                type: array
            GraphDriver:
                $ref: '#/definitions/DriverData'
            HostConfig:
                $ref: '#/definitions/InspectContainerHostConfig'
            HostnamePath:
                type: string
            HostsPath:
                type: string
            Id:
                type: string
                x-go-name: ID
            Image:
                type: string
            ImageDigest:
                type: string
            ImageName:
                type: string
            IsInfra:
                type: boolean
            IsService:
                type: boolean
            KubeExitCodePropagation:
                type: string
            MountLabel:
                type: string
            Mounts:
                items:
                    $ref: '#/definitions/InspectMount'
                type: array
            Name:
                type: string
            Namespace:
                type: string
            NetworkSettings:
                $ref: '#/definitions/InspectNetworkSettings'
            OCIConfigPath:
                type: string
            OCIRuntime:
                type: string
            Path:
                type: string
            PidFile:
                type: string
            Pod:
                type: string
            ProcessLabel:
                type: string
            ResolvConfPath:
                type: string
            RestartCount:
                format: int32
                type: integer
            Rootfs:
                type: string
            SizeRootFs:
                format: int64
                type: integer
            SizeRw:
                format: int64
                type: integer
            State:
                $ref: '#/definitions/InspectContainerState'
            StaticDir:
                type: string
            UseImageHostname:
                type: boolean
            UseImageHosts:
                type: boolean
            lockNumber:
                format: uint32
                type: integer
                x-go-name: LockNumber
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectContainerHostConfig:
        description: |-
            InspectContainerHostConfig holds information used when the container was
            created.
            It's very much a Docker-specific struct, retained (mostly) as-is for
            compatibility. We fill individual fields as best as we can, inferring as much
            as possible from the spec and container config.
            Some things cannot be inferred. These will be populated by spec annotations
            (if available).
        properties:
            Annotations:
                additionalProperties:
                    type: string
                description: |-
                    Annotations are provided to the runtime when the container is
                    started.
                type: object
            AutoRemove:
                description: |-
                    AutoRemove is whether the container will be automatically removed on
                    exiting.
                    It is not handled directly within libpod and is stored in an
                    annotation.
                type: boolean
            AutoRemoveImage:
                description: |-
                    AutoRemoveImage is whether the container's image will be
                    automatically removed on exiting.
                    It is not handled directly within libpod and is stored in an
                    annotation.
                type: boolean
            Binds:
                description: |-
                    Binds contains an array of user-added mounts.
                    Both volume mounts and named volumes are included.
                    Tmpfs mounts are NOT included.
                    In 'docker inspect' this is separated into 'Binds' and 'Mounts' based
                    on how a mount was added. We do not make this distinction and do not
                    include a Mounts field in inspect.
                    Format: <src>:<destination>[:<comma-separated options>]
                items:
                    type: string
                type: array
            BlkioDeviceReadBps:
                description: |-
                    BlkioDeviceReadBps is an array of I/O throttle parameters for
                    individual device nodes.
                    This specifically sets read rate cap in bytes per second for device
                    nodes.
                    As with BlkioWeightDevice, we pull the path from /sys/dev, and we
                    don't guarantee the path will be identical to the original (though
                    the node will be).
                items:
                    $ref: '#/definitions/InspectBlkioThrottleDevice'
                type: array
            BlkioDeviceReadIOps:
                description: |-
                    BlkioDeviceReadIOps is an array of I/O throttle parameters for
                    individual device nodes.
                    This specifically sets the read rate cap in iops per second for
                    device nodes.
                    As with BlkioWeightDevice, we pull the path from /sys/dev, and we
                    don't guarantee the path will be identical to the original (though
                    the node will be).
                items:
                    $ref: '#/definitions/InspectBlkioThrottleDevice'
                type: array
            BlkioDeviceWriteBps:
                description: |-
                    BlkioDeviceWriteBps is an array of I/O throttle parameters for
                    individual device nodes.
                    this specifically sets write rate cap in bytes per second for device
                    nodes.
                    as with BlkioWeightDevice, we pull the path from /sys/dev, and we
                    don't guarantee the path will be identical to the original (though
                    the node will be).
                items:
                    $ref: '#/definitions/InspectBlkioThrottleDevice'
                type: array
            BlkioDeviceWriteIOps:
                description: |-
                    BlkioDeviceWriteIOps is an array of I/O throttle parameters for
                    individual device nodes.
                    This specifically sets the write rate cap in iops per second for
                    device nodes.
                    As with BlkioWeightDevice, we pull the path from /sys/dev, and we
                    don't guarantee the path will be identical to the original (though
                    the node will be).
                items:
                    $ref: '#/definitions/InspectBlkioThrottleDevice'
                type: array
            BlkioWeight:
                description: |-
                    BlkioWeight indicates the I/O resources allocated to the container.
                    It is a relative weight in the scheduler for assigning I/O time
                    versus other Cgroups.
                format: uint16
                type: integer
            BlkioWeightDevice:
                description: |-
                    BlkioWeightDevice is an array of I/O resource priorities for
                    individual device nodes.
                    Unfortunately, the spec only stores the device's Major/Minor numbers
                    and not the path, which is used here.
                    Fortunately, the kernel provides an interface for retrieving the path
                    of a given node by major:minor at /sys/dev/. However, the exact path
                    in use may not be what was used in the original CLI invocation -
                    though it is guaranteed that the device node will be the same, and
                    using the given path will be functionally identical.
                items:
                    $ref: '#/definitions/InspectBlkioWeightDevice'
                type: array
            CapAdd:
                description: |-
                    CapAdd is a list of capabilities added to the container.
                    It is not directly stored by Libpod, and instead computed from the
                    capabilities listed in the container's spec, compared against a set
                    of default capabilities.
                items:
                    type: string
                type: array
            CapDrop:
                description: |-
                    CapDrop is a list of capabilities removed from the container.
                    It is not directly stored by libpod, and instead computed from the
                    capabilities listed in the container's spec, compared against a set
                    of default capabilities.
                items:
                    type: string
                type: array
            Cgroup:
                description: |-
                    Cgroup contains the container's cgroup. It is presently not
                    populated.
                    TODO.
                type: string
            CgroupConf:
                additionalProperties:
                    type: string
                description: CgroupConf is the configuration for cgroup v2.
                type: object
            CgroupManager:
                description: |-
                    CgroupManager is the cgroup manager used by the container.
                    At present, allowed values are either "cgroupfs" or "systemd".
                type: string
            CgroupMode:
                description: |-
                    CgroupMode is the configuration of the container's cgroup namespace.
                    Populated as follows:
                    private - a cgroup namespace has been created
                    host - No cgroup namespace created
                    container:<id> - Using another container's cgroup namespace
                    ns:<path> - A path to a cgroup namespace has been specified
                type: string
            CgroupParent:
                description: |-
                    CgroupParent is the Cgroup parent of the container.
                    Only set if not default.
                type: string
            Cgroups:
                description: |-
                    Cgroups contains the container's Cgroup mode.
                    Allowed values are "default" (container is creating Cgroups) and
                    "disabled" (container is not creating Cgroups).
                    This is Libpod-specific and not included in `docker inspect`.
                type: string
            ConsoleSize:
                description: |-
                    ConsoleSize is an array of 2 integers showing the size of the
                    container's console.
                    It is only set if the container is creating a terminal.
                    TODO.
                items:
                    format: uint64
                    type: integer
                type: array
            ContainerIDFile:
                description: |-
                    ContainerIDFile is a file created during container creation to hold
                    the ID of the created container.
                    This is not handled within libpod and is stored in an annotation.
                type: string
            CpuCount:
                description: CpuCount is Windows-only and not presently implemented.
                format: uint64
                type: integer
            CpuPercent:
                description: CpuPercent is Windows-only and not presently implemented.
                format: uint64
                type: integer
            CpuPeriod:
                description: |-
                    CpuPeriod is the length of a CPU period in microseconds.
                    It relates directly to CpuQuota.
                format: uint64
                type: integer
            CpuQuota:
                description: |-
                    CpuPeriod is the amount of time (in microseconds) that a container
                    can use the CPU in every CpuPeriod.
                format: int64
                type: integer
            CpuRealtimePeriod:
                description: |-
                    CpuRealtimePeriod is the length of time (in microseconds) of the CPU
                    realtime period. If set to 0, no time will be allocated to realtime
                    tasks.
                format: uint64
                type: integer
            CpuRealtimeRuntime:
                description: |-
                    CpuRealtimeRuntime is the length of time (in microseconds) allocated
                    for realtime tasks within every CpuRealtimePeriod.
                format: int64
                type: integer
            CpuShares:
                description: |-
                    CpuShares indicates the CPU resources allocated to the container.
                    It is a relative weight in the scheduler for assigning CPU time
                    versus other Cgroups.
                format: uint64
                type: integer
            CpusetCpus:
                description: |-
                    CpusetCpus is the set of CPUs that the container will execute on.
                    Formatted as `0-3` or `0,2`. Default (if unset) is all CPUs.
                type: string
            CpusetMems:
                description: |-
                    CpusetMems is the set of memory nodes the container will use.
                    Formatted as `0-3` or `0,2`. Default (if unset) is all memory nodes.
                type: string
            Devices:
                description: |-
                    Devices is a list of device nodes that will be added to the
                    container.
                    These are stored in the OCI spec only as type, major, minor while we
                    display the host path. We convert this with /sys/dev, but we cannot
                    guarantee that the host path will be identical - only that the actual
                    device will be.
                items:
                    $ref: '#/definitions/InspectDevice'
                type: array
            DiskQuota:
                description: |-
                    DiskQuota is the maximum amount of disk space the container may use
                    (in bytes).
                    Presently not populated.
                    TODO.
                format: uint64
                type: integer
            Dns:
                description: |-
                    Dns is a list of DNS nameservers that will be added to the
                    container's resolv.conf
                items:
                    type: string
                type: array
            DnsOptions:
                description: |-
                    DnsOptions is a list of DNS options that will be set in the
                    container's resolv.conf
                items:
                    type: string
                type: array
            DnsSearch:
                description: |-
                    DnsSearch is a list of DNS search domains that will be set in the
                    container's resolv.conf
                items:
                    type: string
                type: array
            ExtraHosts:
                description: |-
                    ExtraHosts contains hosts that will be added to the container's
                    etc/hosts.
                items:
                    type: string
                type: array
            GroupAdd:
                description: |-
                    GroupAdd contains groups that the user inside the container will be
                    added to.
                items:
                    type: string
                type: array
            HostsFile:
                description: HostsFile is the base file to create the `/etc/hosts` file inside the container.
                type: string
            IDMappings:
                $ref: '#/definitions/InspectIDMappings'
            IOMaximumBandwidth:
                description: IOMaximumBandwidth is Windows-only and not presently implemented.
                format: uint64
                type: integer
            IOMaximumIOps:
                description: IOMaximumIOps is Windows-only and not presently implemented.
                format: uint64
                type: integer
            Init:
                description: Init indicates whether the container has an init mounted into it.
                type: boolean
            IntelRdtClosID:
                description: |-
                    IntelRdtClosID defines the Intel RDT CAT Class Of Service (COS) that
                    all processes of the container should run in.
                type: string
            IpcMode:
                description: |-
                    IpcMode represents the configuration of the container's IPC
                    namespace.
                    Populated as follows:
                    "" (empty string) - Default, an IPC namespace will be created
                    host - No IPC namespace created
                    container:<id> - Using another container's IPC namespace
                    ns:<path> - A path to an IPC namespace has been specified
                type: string
            Isolation:
                description: |-
                    Isolation is presently unused and provided solely for Docker
                    compatibility.
                type: string
            KernelMemory:
                description: |-
                    KernelMemory is the maximum amount of memory the kernel will devote
                    to the container.
                format: int64
                type: integer
            Links:
                description: Links is unused, and provided purely for Docker compatibility.
                items:
                    type: string
                type: array
            LogConfig:
                $ref: '#/definitions/InspectLogConfig'
            Memory:
                description: |-
                    Memory indicates the memory resources allocated to the container.
                    This is the limit (in bytes) of RAM the container may use.
                format: int64
                type: integer
            MemoryReservation:
                description: |-
                    MemoryReservation is the reservation (soft limit) of memory available
                    to the container. Soft limits are warnings only and can be exceeded.
                format: int64
                type: integer
            MemorySwap:
                description: |-
                    MemorySwap is the total limit for all memory available to the
                    container, including swap. 0 indicates that there is no limit to the
                    amount of memory available.
                format: int64
                type: integer
            MemorySwappiness:
                description: |-
                    MemorySwappiness is the willingness of the kernel to page container
                    memory to swap. It is an integer from 0 to 100, with low numbers
                    being more likely to be put into swap.
                    nil means swappiness is unset and the system default is used.
                format: int64
                type: integer
            NanoCpus:
                description: |-
                    NanoCpus indicates number of CPUs allocated to the container.
                    It is an integer where one full CPU is indicated by 1000000000 (one
                    billion).
                    Thus, 2.5 CPUs (fractional portions of CPUs are allowed) would be
                    2500000000 (2.5 billion).
                    In 'docker inspect' this is set exclusively of two further options in
                    the output (CpuPeriod and CpuQuota) which are both used to implement
                    this functionality.
                    We can't distinguish here, so if CpuQuota is set to the default of
                    100000, we will set both CpuQuota, CpuPeriod, and NanoCpus. If
                    CpuQuota is not the default, we will not set NanoCpus.
                format: int64
                type: integer
            NetworkMode:
                description: |-
                    NetworkMode is the configuration of the container's network
                    namespace.
                    Populated as follows:
                    default - A network namespace is being created and configured
                    none - A network namespace is being created, not configured
                    host - No network namespace created
                    container:<id> - Using another container's network namespace
                    ns:<path> - A path to a network namespace has been specified
                type: string
            OomKillDisable:
                description: |-
                    OomKillDisable indicates whether the kernel OOM killer is disabled
                    for the container.
                type: boolean
            OomScoreAdj:
                description: |-
                    OOMScoreAdj is an adjustment that will be made to the container's OOM
                    score.
                format: int64
                type: integer
            PidMode:
                description: |-
                    PidMode represents the configuration of the container's PID
                    namespace.
                    Populated as follows:
                    "" (empty string) - Default, a PID namespace will be created
                    host - No PID namespace created
                    container:<id> - Using another container's PID namespace
                    ns:<path> - A path to a PID namespace has been specified
                type: string
            PidsLimit:
                description: |-
                    PidsLimit is the maximum number of PIDs that may be created within
                    the container. 0, the default, indicates no limit.
                format: int64
                type: integer
            PortBindings:
                additionalProperties:
                    items:
                        $ref: '#/definitions/InspectHostPort'
                    type: array
                description: |-
                    PortBindings contains the container's port bindings.
                    It is formatted as map[string][]InspectHostPort.
                    The string key here is formatted as <integer port number>/<protocol>
                    and represents the container port. A single container port may be
                    bound to multiple host ports (on different IPs).
                type: object
            Privileged:
                description: |-
                    Privileged indicates whether the container is running with elevated
                    privileges.
                    This has a very specific meaning in the Docker sense, so it's very
                    difficult to decode from the spec and config, and so is stored as an
                    annotation.
                type: boolean
            PublishAllPorts:
                description: |-
                    PublishAllPorts indicates whether image ports are being published.
                    This is not directly stored in libpod and is saved as an annotation.
                type: boolean
            ReadonlyRootfs:
                description: ReadonlyRootfs is whether the container will be mounted read-only.
                type: boolean
            RestartPolicy:
                $ref: '#/definitions/InspectRestartPolicy'
            Runtime:
                description: |-
                    Runtime is provided purely for Docker compatibility.
                    It is set unconditionally to "oci" as Podman does not presently
                    support non-OCI runtimes.
                type: string
            SecurityOpt:
                description: |-
                    SecurityOpt is a list of security-related options that are set in the
                    container.
                items:
                    type: string
                type: array
            ShmSize:
                format: int64
                type: integer
            Tmpfs:
                additionalProperties:
                    type: string
                description: |-
                    Tmpfs is a list of tmpfs filesystems that will be mounted into the
                    container.
                    It is a map of destination path to options for the mount.
                type: object
            UTSMode:
                description: |-
                    UTSMode represents the configuration of the container's UID
                    namespace.
                    Populated as follows:
                    "" (empty string) - Default, a UTS namespace will be created
                    host - no UTS namespace created
                    container:<id> - Using another container's UTS namespace
                    ns:<path> - A path to a UTS namespace has been specified
                type: string
            Ulimits:
                description: Ulimits is a set of ulimits that will be set within the container.
                items:
                    $ref: '#/definitions/InspectUlimit'
                type: array
            UsernsMode:
                description: |-
                    UsernsMode represents the configuration of the container's user
                    namespace.
                    When running rootless, a user namespace is created outside of libpod
                    to allow some privileged operations. This will not be reflected here.
                    Populated as follows:
                    "" (empty string) - No user namespace will be created
                    private - The container will be run in a user namespace
                    container:<id> - Using another container's user namespace
                    ns:<path> - A path to a user namespace has been specified
                    TODO Rootless has an additional 'keep-id' option, presently not
                    reflected here.
                type: string
            VolumeDriver:
                description: |-
                    VolumeDriver is presently unused and is retained for Docker
                    compatibility.
                type: string
            VolumesFrom:
                description: |-
                    VolumesFrom is a list of containers which this container uses volumes
                    from. This is not handled directly within libpod and is stored in an
                    annotation.
                    It is formatted as an array of container names and IDs.
                items:
                    type: string
                type: array
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectContainerState:
        description: |-
            InspectContainerState provides a detailed record of a container's current
            state. It is returned as part of InspectContainerData.
            As with InspectContainerData, many portions of this struct are matched to
            Docker, but here we see more fields that are unused (nonsensical in the
            context of Libpod).
        properties:
            CgroupPath:
                type: string
            CheckpointLog:
                type: string
            CheckpointPath:
                type: string
            Checkpointed:
                type: boolean
            CheckpointedAt:
                format: date-time
                type: string
            ConmonPid:
                format: int64
                type: integer
            Dead:
                type: boolean
            Error:
                type: string
            ExitCode:
                format: int32
                type: integer
            FinishedAt:
                format: date-time
                type: string
            Health:
                $ref: '#/definitions/HealthCheckResults'
            OOMKilled:
                type: boolean
            OciVersion:
                type: string
            Paused:
                type: boolean
            Pid:
                format: int64
                type: integer
            Restarting:
                type: boolean
            RestoreLog:
                type: string
            Restored:
                type: boolean
            RestoredAt:
                format: date-time
                type: string
            Running:
                type: boolean
            StartedAt:
                format: date-time
                type: string
            Status:
                type: string
            StoppedByUser:
                type: boolean
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectDevice:
        properties:
            CgroupPermissions:
                description: |-
                    CgroupPermissions is the permissions of the mounted device.
                    Presently not populated.
                    TODO.
                type: string
            PathInContainer:
                description: PathInContainer is the path of the device within the container.
                type: string
            PathOnHost:
                description: PathOnHost is the path of the device on the host.
                type: string
        title: InspectDevice is a single device that will be mounted into the container.
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectExecProcess:
        description: |-
            InspectExecProcess contains information about the process in a given exec
            session.
        properties:
            arguments:
                description: |-
                    Arguments are the arguments to the entrypoint command of the exec
                    session.
                items:
                    type: string
                type: array
                x-go-name: Arguments
            entrypoint:
                description: |-
                    Entrypoint is the entrypoint for the exec session (the command that
                    will be executed in the container).
                type: string
                x-go-name: Entrypoint
            privileged:
                description: |-
                    Privileged is whether the exec session will be started with elevated
                    privileges.
                type: boolean
                x-go-name: Privileged
            tty:
                description: Tty is whether the exec session created a terminal.
                type: boolean
                x-go-name: Tty
            user:
                description: User is the user the exec session was started as.
                type: string
                x-go-name: User
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectExecSession:
        properties:
            CanRemove:
                description: |-
                    CanRemove is legacy and used purely for compatibility reasons.
                    Will always be set to true, unless the exec session is running.
                type: boolean
            ContainerID:
                description: |-
                    ContainerID is the ID of the container this exec session is attached
                    to.
                type: string
            DetachKeys:
                description: |-
                    DetachKeys are the detach keys used by the exec session.
                    If set to "" the default keys are being used.
                    Will show "<none>" if no detach keys are set.
                type: string
            ExitCode:
                description: |-
                    ExitCode is the exit code of the exec session. Will be set to 0 if
                    the exec session has not yet exited.
                format: int64
                type: integer
            ID:
                description: ID is the ID of the exec session.
                type: string
            OpenStderr:
                description: |-
                    OpenStderr is whether the container's STDERR stream will be attached.
                    Always set to true if the exec session created a TTY.
                type: boolean
            OpenStdin:
                description: |-
                    OpenStdin is whether the container's STDIN stream will be attached
                    to.
                type: boolean
            OpenStdout:
                description: |-
                    OpenStdout is whether the container's STDOUT stream will be attached.
                    Always set to true if the exec session created a TTY.
                type: boolean
            Pid:
                description: |-
                    Pid is the PID of the exec session's process.
                    Will be set to 0 if the exec session is not running.
                format: int64
                type: integer
            ProcessConfig:
                $ref: '#/definitions/InspectExecProcess'
            Running:
                description: Running is whether the exec session is running.
                type: boolean
        title: InspectExecSession contains information about a given exec session.
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectHostPort:
        description: |-
            InspectHostPort provides information on a port on the host that a container's
            port is bound to.
        properties:
            HostIp:
                description: |-
                    IP on the host we are bound to. "" if not specified (binding to all
                    IPs).
                type: string
                x-go-name: HostIP
            HostPort:
                description: |-
                    Port on the host we are bound to. No special formatting - just an
                    integer stuffed into a string.
                type: string
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectIDMappings:
        properties:
            GidMap:
                items:
                    type: string
                type: array
                x-go-name: GIDMap
            UidMap:
                items:
                    type: string
                type: array
                x-go-name: UIDMap
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectLogConfig:
        description: InspectLogConfig holds information about a container's configured log driver
        properties:
            Config:
                additionalProperties:
                    type: string
                type: object
            Path:
                description: Path specifies a path to the log file
                type: string
            Size:
                description: Size specifies a maximum size of the container log
                type: string
            Tag:
                description: Tag specifies a custom log tag for the container
                type: string
            Type:
                type: string
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectMount:
        description: |-
            InspectMount provides a record of a single mount in a container. It contains
            fields for both named and normal volumes. Only user-specified volumes will be
            included, and tmpfs volumes are not included even if the user specified them.
        properties:
            Destination:
                description: |-
                    The destination directory for the volume. Specified as a path within
                    the container, as it would be passed into the OCI runtime.
                type: string
            Driver:
                description: The driver used for the named volume. Empty for bind mounts.
                type: string
            Mode:
                description: |-
                    Contains SELinux :z/:Z mount options. Unclear what, if anything, else
                    goes in here.
                type: string
            Name:
                description: The name of the volume. Empty for bind mounts.
                type: string
            Options:
                description: |-
                    All remaining mount options. Additional data, not present in the
                    original output.
                items:
                    type: string
                type: array
            Propagation:
                description: |-
                    Mount propagation for the mount. Can be empty if not specified, but
                    is always printed - no omitempty.
                type: string
            RW:
                description: Whether the volume is read-write
                type: boolean
            Source:
                description: The source directory for the volume.
                type: string
            SubPath:
                description: |-
                    SubPath object from the volume. Specified as a path within
                    the source volume to be mounted at the Destination.
                type: string
            Type:
                description: |-
                    Whether the mount is a volume or bind mount. Allowed values are
                    "volume" and "bind".
                type: string
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectNetworkSettings:
        description: |-
            InspectNetworkSettings holds information about the network settings of the
            container.
            Many fields are maintained only for compatibility with `docker inspect` and
            are unused within Libpod.
        properties:
            AdditionalMACAddresses:
                description: |-
                    AdditionalMacAddresses is a set of additional MAC Addresses beyond
                    the first. The network backend may configure more than one interface
                    for a single network, which can cause this.
                items:
                    type: string
                type: array
                x-go-name: AdditionalMacAddresses
            Bridge:
                type: string
            EndpointID:
                description: EndpointID is unused, maintained exclusively for compatibility.
                type: string
            Gateway:
                description: Gateway is the IP address of the gateway this network will use.
                type: string
            GlobalIPv6Address:
                description: GlobalIPv6Address is the global-scope IPv6 Address for this network.
                type: string
            GlobalIPv6PrefixLen:
                description: GlobalIPv6PrefixLen is the length of the subnet mask of this network.
                format: int64
                type: integer
            HairpinMode:
                type: boolean
            IPAddress:
                description: IPAddress is the IP address for this network.
                type: string
            IPPrefixLen:
                description: IPPrefixLen is the length of the subnet mask of this network.
                format: int64
                type: integer
            IPv6Gateway:
                description: IPv6Gateway is the IPv6 gateway this network will use.
                type: string
            LinkLocalIPv6Address:
                type: string
            LinkLocalIPv6PrefixLen:
                format: int64
                type: integer
            MacAddress:
                description: MacAddress is the MAC address for the interface in this network.
                type: string
            Networks:
                additionalProperties:
                    $ref: '#/definitions/InspectAdditionalNetwork'
                description: |-
                    Networks contains information on non-default networks this
                    container has joined.
                    It is a map of network name to network information.
                type: object
            Ports:
                additionalProperties:
                    items:
                        $ref: '#/definitions/InspectHostPort'
                    type: array
                type: object
            SandboxID:
                type: string
            SandboxKey:
                type: string
            SecondaryIPAddresses:
                description: |-
                    SecondaryIPAddresses is a list of extra IP Addresses that the
                    container has been assigned in this network.
                items:
                    $ref: '#/definitions/Address'
                type: array
            SecondaryIPv6Addresses:
                description: |-
                    SecondaryIPv6Addresses is a list of extra IPv6 Addresses that the
                    container has been assigned in this network.
                items:
                    $ref: '#/definitions/Address'
                type: array
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectPodContainerInfo:
        properties:
            Id:
                description: ID is the ID of the container.
                type: string
                x-go-name: ID
            Name:
                description: Name is the name of the container.
                type: string
            State:
                description: State is the current status of the container.
                type: string
        title: InspectPodContainerInfo contains information on a container in a pod.
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectPodData:
        description: |-
            InspectPodData contains detailed information on a pod's configuration and
            state. It is used as the output of Inspect on pods.
        properties:
            CgroupParent:
                description: CgroupParent is the parent of the pod's Cgroup.
                type: string
            CgroupPath:
                description: CgroupPath is the path to the pod's Cgroup.
                type: string
            Containers:
                description: |-
                    Containers gives a brief summary of all containers in the pod and
                    their current status.
                items:
                    $ref: '#/definitions/InspectPodContainerInfo'
                type: array
            CreateCgroup:
                description: |-
                    CreateCgroup is whether this pod will create its own Cgroup to group
                    containers under.
                type: boolean
            CreateCommand:
                description: |-
                    CreateCommand is the full command plus arguments of the process the
                    container has been created with.
                items:
                    type: string
                type: array
            CreateInfra:
                description: |-
                    CreateInfra is whether this pod will create an infra container to
                    share namespaces.
                type: boolean
            Created:
                description: Created is the time when the pod was created.
                format: date-time
                type: string
            ExitPolicy:
                description: ExitPolicy of the pod.
                type: string
            Hostname:
                description: Hostname is the hostname that the pod will set.
                type: string
            Id:
                description: ID is the ID of the pod.
                type: string
                x-go-name: ID
            InfraConfig:
                $ref: '#/definitions/InspectPodInfraConfig'
            InfraContainerID:
                description: |-
                    InfraContainerID is the ID of the pod's infra container, if one is
                    present.
                type: string
            Labels:
                additionalProperties:
                    type: string
                description: |-
                    Labels is a set of key-value labels that have been applied to the
                    pod.
                type: object
            LockNumber:
                description: Number of the pod's Libpod lock.
                format: uint32
                type: integer
            Name:
                description: Name is the name of the pod.
                type: string
            Namespace:
                description: Namespace is the Libpod namespace the pod is placed in.
                type: string
            NumContainers:
                description: |-
                    NumContainers is the number of containers in the pod, including the
                    infra container.
                format: uint64
                type: integer
            RestartPolicy:
                description: RestartPolicy of the pod.
                type: string
            SharedNamespaces:
                description: |-
                    SharedNamespaces contains a list of namespaces that will be shared by
                    containers within the pod. Can only be set if CreateInfra is true.
                items:
                    type: string
                type: array
            State:
                description: State represents the current state of the pod.
                type: string
            blkio_weight:
                description: BlkioWeight contains the blkio weight limit for the pod
                format: uint64
                type: integer
                x-go-name: BlkioWeight
            blkio_weight_device:
                description: BlkioWeightDevice contains the blkio weight device limits for the pod
                items:
                    $ref: '#/definitions/InspectBlkioWeightDevice'
                type: array
                x-go-name: BlkioWeightDevice
            cpu_period:
                description: CPUPeriod contains the CPU period of the pod
                format: uint64
                type: integer
                x-go-name: CPUPeriod
            cpu_quota:
                description: CPUQuota contains the CPU quota of the pod
                format: int64
                type: integer
                x-go-name: CPUQuota
            cpu_shares:
                description: CPUShares contains the cpu shares for the pod
                format: uint64
                type: integer
                x-go-name: CPUShares
            cpuset_cpus:
                description: CPUSetCPUs contains linux specific CPU data for the pod
                type: string
                x-go-name: CPUSetCPUs
            cpuset_mems:
                description: CPUSetMems contains linux specific CPU data for the pod
                type: string
                x-go-name: CPUSetMems
            device_read_bps:
                description: BlkioDeviceReadBps contains the Read/Access limit for the pod's devices
                items:
                    $ref: '#/definitions/InspectBlkioThrottleDevice'
                type: array
                x-go-name: BlkioDeviceReadBps
            device_write_bps:
                description: BlkioDeviceReadBps contains the Read/Access limit for the pod's devices
                items:
                    $ref: '#/definitions/InspectBlkioThrottleDevice'
                type: array
                x-go-name: BlkioDeviceWriteBps
            devices:
                description: Devices contains the specified host devices
                items:
                    $ref: '#/definitions/InspectDevice'
                type: array
                x-go-name: Devices
            memory_limit:
                description: MemoryLimit contains the specified cgroup memory limit for the pod
                format: uint64
                type: integer
                x-go-name: MemoryLimit
            memory_swap:
                description: MemorySwap contains the specified memory swap limit for the pod
                format: uint64
                type: integer
                x-go-name: MemorySwap
            mounts:
                description: Mounts contains volume related information for the pod
                items:
                    $ref: '#/definitions/InspectMount'
                type: array
                x-go-name: Mounts
            security_opt:
                description: SecurityOpt contains the specified security labels and related SELinux information
                items:
                    type: string
                type: array
                x-go-name: SecurityOpts
            volumes_from:
                description: VolumesFrom contains the containers that the pod inherits mounts from
                items:
                    type: string
                type: array
                x-go-name: VolumesFrom
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectPodInfraConfig:
        description: |-
            InspectPodInfraConfig contains the configuration of the pod's infra
            container.
        properties:
            DNSOption:
                description: |-
                    DNSOption is a set of DNS options that will be used by the infra
                    container's resolv.conf and shared with the remainder of the pod.
                items:
                    type: string
                type: array
            DNSSearch:
                description: |-
                    DNSSearch is a set of DNS search domains that will be used by the
                    infra container's resolv.conf and shared with the remainder of the
                    pod.
                items:
                    type: string
                type: array
            DNSServer:
                description: |-
                    DNSServer is a set of DNS Servers that will be used by the infra
                    container's resolv.conf and shared with the remainder of the pod.
                items:
                    type: string
                type: array
            HostAdd:
                description: |-
                    HostAdd adds a number of hosts to the infra container's resolv.conf
                    which will be shared with the rest of the pod.
                items:
                    type: string
                type: array
            HostNetwork:
                description: |-
                    HostNetwork is whether the infra container (and thus the whole pod)
                    will use the host's network and not create a network namespace.
                type: boolean
            HostsFile:
                description: |-
                    HostsFile is the base file to create the `/etc/hosts` file inside the infra container
                    which will be shared with the rest of the pod.
                type: string
            NetworkOptions:
                additionalProperties:
                    items:
                        type: string
                    type: array
                description: NetworkOptions are additional options for each network
                type: object
            Networks:
                description: Networks is a list of networks the pod will join.
                items:
                    type: string
                type: array
            NoManageHostname:
                description: |-
                    NoManageHostname indicates that the pod will not manage /etc/hostname
                    and instead each container will handle their own.
                type: boolean
            NoManageHosts:
                description: |-
                    NoManageHosts indicates that the pod will not manage /etc/hosts and
                    instead each container will handle their own.
                type: boolean
            NoManageResolvConf:
                description: |-
                    NoManageResolvConf indicates that the pod will not manage resolv.conf
                    and instead each container will handle their own.
                type: boolean
            PortBindings:
                additionalProperties:
                    items:
                        $ref: '#/definitions/InspectHostPort'
                    type: array
                description: |-
                    PortBindings are ports that will be forwarded to the infra container
                    and then shared with the pod.
                type: object
            StaticIP:
                description: |-
                    StaticIP is a static IPv4 that will be assigned to the infra
                    container and then used by the pod.
                format: ipv4
                type: string
                x-go-type: net.IP
            StaticMAC:
                description: |-
                    StaticMAC is a static MAC address that will be assigned to the infra
                    container and then used by the pod.
                type: string
            cpu_period:
                description: CPUPeriod contains the CPU period of the pod
                format: uint64
                type: integer
                x-go-name: CPUPeriod
            cpu_quota:
                description: CPUQuota contains the CPU quota of the pod
                format: int64
                type: integer
                x-go-name: CPUQuota
            cpuset_cpus:
                description: CPUSetCPUs contains linux specific CPU data for the container
                type: string
                x-go-name: CPUSetCPUs
            pid_ns:
                description: Pid is the PID namespace mode of the pod's infra container
                type: string
                x-go-name: PidNS
            userns:
                description: UserNS is the usernamespace that all the containers in the pod will join.
                type: string
                x-go-name: UserNS
            uts_ns:
                description: UtsNS is the uts namespace that all containers in the pod will join
                type: string
                x-go-name: UtsNS
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectResponse:
        description: endpoint.
        properties:
            AppArmorProfile:
                type: string
            Args:
                items:
                    type: string
                type: array
            Config:
                $ref: '#/definitions/Config'
            Created:
                type: string
            Driver:
                type: string
            ExecIDs:
                items:
                    type: string
                type: array
            GraphDriver:
                $ref: '#/definitions/DriverData'
            HostConfig:
                $ref: '#/definitions/HostConfig'
            HostnamePath:
                type: string
            HostsPath:
                type: string
            Id:
                type: string
                x-go-name: ID
            Image:
                type: string
            ImageManifestDescriptor:
                $ref: '#/definitions/Descriptor'
            LogPath:
                type: string
            MountLabel:
                type: string
            Mounts:
                items:
                    $ref: '#/definitions/MountPoint'
                type: array
            Name:
                type: string
            NetworkSettings:
                $ref: '#/definitions/NetworkSettings'
            Path:
                type: string
            Platform:
                type: string
            ProcessLabel:
                type: string
            ResolvConfPath:
                type: string
            RestartCount:
                format: int64
                type: integer
            SizeRootFs:
                format: int64
                type: integer
            SizeRw:
                format: int64
                type: integer
            State:
                $ref: '#/definitions/State'
            Storage:
                $ref: '#/definitions/Storage'
        title: InspectResponse is the response for the GET "/containers/{name:.*}/json"
        type: object
        x-go-package: github.com/moby/moby/api/types/container
    InspectRestartPolicy:
        properties:
            MaximumRetryCount:
                description: |-
                    MaximumRetryCount is the maximum number of retries allowed if the
                    "on-failure" restart policy is in use. Not used if "on-failure" is
                    not set.
                format: uint64
                type: integer
            Name:
                description: |-
                    Name contains the container's restart policy.
                    Allowable values are "no" or "" (take no action),
                    "on-failure" (restart on non-zero exit code, with an optional max
                    retry count), and "always" (always restart on container stop, unless
                    explicitly requested by API).
                    Note that this is NOT actually a name of any sort - the poor naming
                    is for Docker compatibility.
                type: string
        title: InspectRestartPolicy holds information about the container's restart policy.
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectSecret:
        description: InspectSecret contains information on secrets mounted inside the container
        properties:
            GID:
                description: ID is the GID of the mounted secret file
                format: uint32
                type: integer
            ID:
                description: ID is the ID of the secret
                type: string
            Mode:
                description: ID is the ID of the mode of the mounted secret file
                format: uint32
                type: integer
            Name:
                description: Name is the name of the secret
                type: string
            UID:
                description: ID is the UID of the mounted secret file
                format: uint32
                type: integer
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    InspectUlimit:
        properties:
            Hard:
                description: Hard is the hard limit that will be applied.
                format: int64
                type: integer
            Name:
                description: Name is the name (type) of the ulimit.
                type: string
            Soft:
                description: Soft is the soft limit that will be applied.
                format: int64
                type: integer
        title: InspectUlimit is a ulimit that will be applied to the container.
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    IpcMode:
        title: IpcMode represents the container ipc stack.
        type: string
        x-go-package: github.com/moby/moby/api/types/container
    Isolation:
        description: |-
            Isolation represents the isolation technology of a container. The supported
            values are platform specific
        type: string
        x-go-package: github.com/moby/moby/api/types/container
    KnownSignerIdentity:
        title: KnownSignerIdentity is an identifier for a special signer identity that is known to the implementation.
        type: string
        x-go-package: github.com/moby/moby/api/types/image
    LeaseRange:
        properties:
            end_ip:
                description: EndIP last IP in the subnet which should be used to assign ips.
                format: string
                type: string
                x-go-name: EndIP
                x-go-type: net.IP
            start_ip:
                description: StartIP first IP in the subnet which should be used to assign ips.
                format: string
                type: string
                x-go-name: StartIP
                x-go-type: net.IP
        title: LeaseRange contains the range where IP are leased.
        type: object
        x-go-package: go.podman.io/common/libnetwork/types
    LegacyImageSummary:
        properties:
            Containers:
                description: |-
                    Number of containers using this image. Includes both stopped and running
                    containers.

                    This size is not calculated by default, and depends on which API endpoint
                    is used. `-1` indicates that the value has not been set / calculated.
                format: int64
                type: integer
            Created:
                description: |-
                    Date and time at which the image was created as a Unix timestamp
                    (number of seconds since EPOCH).
                format: int64
                type: integer
            Descriptor:
                $ref: '#/definitions/Descriptor'
            Id:
                description: |-
                    ID is the content-addressable ID of an image.

                    This identifier is a content-addressable digest calculated from the
                    image's configuration (which includes the digests of layers used by
                    the image).

                    Note that this digest differs from the `RepoDigests` below, which
                    holds digests of image manifests that reference the image.
                type: string
                x-go-name: ID
            Labels:
                additionalProperties:
                    type: string
                description: User-defined key/value metadata.
                type: object
            Manifests:
                description: |-
                    Manifests is a list of image manifests available in this image.  It
                    provides a more detailed view of the platform-specific image manifests or
                    other image-attached data like build attestations.

                    WARNING: This is experimental and may change at any time without any backward
                    compatibility.
                items:
                    $ref: '#/definitions/ManifestSummary'
                type: array
            ParentId:
                description: |-
                    ID of the parent image.

                    Depending on how the image was created, this field may be empty and
                    is only set for images that were built/created locally. This field
                    is empty if the image was pulled from an image registry.
                type: string
                x-go-name: ParentID
            RepoDigests:
                description: |-
                    List of content-addressable digests of locally available image manifests
                    that the image is referenced from. Multiple manifests can refer to the
                    same image.

                    These digests are usually only available if the image was either pulled
                    from a registry, or if the image was pushed to a registry, which is when
                    the manifest is generated and its digest calculated.
                items:
                    type: string
                type: array
            RepoTags:
                description: |-
                    List of image names/tags in the local image cache that reference this
                    image.

                    Multiple image tags can refer to the same image, and this list may be
                    empty if no tags reference the image, in which case the image is
                    "untagged", in which case it can still be referenced by its ID.
                items:
                    type: string
                type: array
            SharedSize:
                description: |-
                    Total size of image layers that are shared between this image and other
                    images.

                    This size is not calculated by default. `-1` indicates that the value
                    has not been set / calculated.
                format: int64
                type: integer
            Size:
                description: Total size of the image including all layers it is composed of.
                format: int64
                type: integer
            VirtualSize:
                format: int64
                type: integer
        required:
            - Containers
            - Created
            - Id
            - Labels
            - ParentId
            - RepoDigests
            - RepoTags
            - SharedSize
            - Size
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/api/handlers
    LibpodContainersRmReport:
        properties:
            Err:
                description: |-
                    Error which occurred during Rm operation (if any).
                    This field is optional and may be omitted if no error occurred.
                type: string
                x-go-name: RmError
                x-nullable: true
                x-omitempty: true
            Id:
                type: string
                x-go-name: ID
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/api/handlers
    LibpodImageSummary:
        properties:
            Arch:
                description: Podman extensions
                type: string
            Containers:
                format: int64
                type: integer
            Created:
                format: int64
                type: integer
            Dangling:
                type: boolean
            Digest:
                type: string
            History:
                items:
                    type: string
                type: array
            Id:
                type: string
                x-go-name: ID
            IsManifestList:
                description: |-
                    IsManifestList is a ptr so we can distinguish between a true
                    json empty response and false.  the docker compat side needs to return
                    empty; where as the libpod side needs a value of true or false
                type: boolean
            Labels:
                additionalProperties:
                    type: string
                type: object
            Names:
                items:
                    type: string
                type: array
            Os:
                type: string
            ParentId:
                type: string
            ReadOnly:
                type: boolean
            RepoDigests:
                items:
                    type: string
                type: array
            RepoTags:
                items:
                    type: string
                type: array
            SharedSize:
                format: int64
                type: integer
            Size:
                format: int64
                type: integer
            VirtualSize:
                format: int64
                type: integer
        type: object
        x-go-name: ImageSummary
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities/types
    LibpodImagesPullReport:
        allOf:
            - $ref: '#/definitions/ImagePullReport'
        x-go-package: go.podman.io/podman/v6/pkg/api/handlers
    LibpodImagesRemoveReport:
        allOf:
            - $ref: '#/definitions/ImageRemoveReport'
            - properties:
                Errors:
                    description: Image removal requires is to return data and an error.
                    items:
                        type: string
                    type: array
              type: object
        description: |-
            LibpodImagesRemoveReport is the return type for image removal via the rest
            api.
        x-go-package: go.podman.io/podman/v6/pkg/api/handlers
    LibpodInfo:
        description: |-
            Info is the overall struct that describes the host system
            running libpod/podman
        properties:
            host:
                $ref: '#/definitions/HostInfo'
            plugins:
                $ref: '#/definitions/Plugins'
            registries:
                additionalProperties: {}
                type: object
                x-go-name: Registries
            store:
                $ref: '#/definitions/StoreInfo'
            version:
                $ref: '#/definitions/Version'
        type: object
        x-go-name: Info
        x-go-package: go.podman.io/podman/v6/libpod/define
    LinuxBlockIO:
        description: LinuxBlockIO for Linux cgroup 'blkio' resource management
        properties:
            leafWeight:
                description: Specifies tasks' weight in the given cgroup while competing with the cgroup's child cgroups, CFQ scheduler only
                format: uint16
                type: integer
                x-go-name: LeafWeight
            throttleReadBpsDevice:
                description: IO read rate limit per cgroup per device, bytes per second
                items:
                    $ref: '#/definitions/LinuxThrottleDevice'
                type: array
                x-go-name: ThrottleReadBpsDevice
            throttleReadIOPSDevice:
                description: IO read rate limit per cgroup per device, IO per second
                items:
                    $ref: '#/definitions/LinuxThrottleDevice'
                type: array
                x-go-name: ThrottleReadIOPSDevice
            throttleWriteBpsDevice:
                description: IO write rate limit per cgroup per device, bytes per second
                items:
                    $ref: '#/definitions/LinuxThrottleDevice'
                type: array
                x-go-name: ThrottleWriteBpsDevice
            throttleWriteIOPSDevice:
                description: IO write rate limit per cgroup per device, IO per second
                items:
                    $ref: '#/definitions/LinuxThrottleDevice'
                type: array
                x-go-name: ThrottleWriteIOPSDevice
            weight:
                description: Specifies per cgroup weight
                format: uint16
                type: integer
                x-go-name: Weight
            weightDevice:
                description: Weight per cgroup per device, can override BlkioWeight
                items:
                    $ref: '#/definitions/LinuxWeightDevice'
                type: array
                x-go-name: WeightDevice
        type: object
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    LinuxBlockIODevice:
        description: LinuxBlockIODevice holds major:minor format supported in blkio cgroup
        properties:
            major:
                description: Major is the device's major number.
                format: int64
                type: integer
                x-go-name: Major
            minor:
                description: Minor is the device's minor number.
                format: int64
                type: integer
                x-go-name: Minor
        type: object
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    LinuxCPU:
        description: LinuxCPU for Linux cgroup 'cpu' resource management
        properties:
            burst:
                description: |-
                    CPU hardcap burst limit (in usecs). Allowed accumulated cpu time additionally for burst in a
                    given period.
                format: uint64
                type: integer
                x-go-name: Burst
            cpus:
                description: CPUs to use within the cpuset. Default is to use any CPU available.
                type: string
                x-go-name: Cpus
            idle:
                description: 'cgroups are configured with minimum weight, 0: default behavior, 1: SCHED_IDLE.'
                format: int64
                type: integer
                x-go-name: Idle
            mems:
                description: List of memory nodes in the cpuset. Default is to use any available memory node.
                type: string
                x-go-name: Mems
            period:
                description: CPU period to be used for hardcapping (in usecs).
                format: uint64
                type: integer
                x-go-name: Period
            quota:
                description: CPU hardcap limit (in usecs). Allowed cpu time in a given period.
                format: int64
                type: integer
                x-go-name: Quota
            realtimePeriod:
                description: CPU period to be used for realtime scheduling (in usecs).
                format: uint64
                type: integer
                x-go-name: RealtimePeriod
            realtimeRuntime:
                description: How much time realtime scheduling may use (in usecs).
                format: int64
                type: integer
                x-go-name: RealtimeRuntime
            shares:
                description: CPU shares (relative weight (ratio) vs. other cgroups with cpu shares).
                format: uint64
                type: integer
                x-go-name: Shares
        type: object
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    LinuxDevice:
        description: LinuxDevice represents the mknod information for a Linux special device file
        properties:
            fileMode:
                $ref: '#/definitions/FileMode'
            gid:
                description: Gid of the device.
                format: uint32
                type: integer
                x-go-name: GID
            major:
                description: Major is the device's major number.
                format: int64
                type: integer
                x-go-name: Major
            minor:
                description: Minor is the device's minor number.
                format: int64
                type: integer
                x-go-name: Minor
            path:
                description: Path to the device.
                type: string
                x-go-name: Path
            type:
                description: Device type, block, char, etc.
                type: string
                x-go-name: Type
            uid:
                description: UID of the device.
                format: uint32
                type: integer
                x-go-name: UID
        type: object
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    LinuxDeviceCgroup:
        description: |-
            LinuxDeviceCgroup represents a device rule for the devices specified to
            the device controller
        properties:
            access:
                description: Cgroup access permissions format, rwm.
                type: string
                x-go-name: Access
            allow:
                description: Allow or deny
                type: boolean
                x-go-name: Allow
            major:
                description: Major is the device's major number.
                format: int64
                type: integer
                x-go-name: Major
            minor:
                description: Minor is the device's minor number.
                format: int64
                type: integer
                x-go-name: Minor
            type:
                description: Device type, block, char, etc.
                type: string
                x-go-name: Type
        type: object
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    LinuxHugepageLimit:
        description: Default to reservation limits if supported. Otherwise fallback to page fault limits.
        properties:
            limit:
                description: Limit is the limit of "hugepagesize" hugetlb reservations (if supported) or usage.
                format: uint64
                type: integer
                x-go-name: Limit
            pageSize:
                description: |-
                    Pagesize is the hugepage size.
                    Format: "<size><unit-prefix>B' (e.g. 64KB, 2MB, 1GB, etc.).
                type: string
                x-go-name: Pagesize
        title: LinuxHugepageLimit structure corresponds to limiting kernel hugepages.
        type: object
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    LinuxIDMapping:
        description: LinuxIDMapping specifies UID/GID mappings
        properties:
            containerID:
                description: ContainerID is the starting UID/GID in the container
                format: uint32
                type: integer
                x-go-name: ContainerID
            hostID:
                description: HostID is the starting UID/GID on the host to be mapped to 'ContainerID'
                format: uint32
                type: integer
                x-go-name: HostID
            size:
                description: Size is the number of IDs to be mapped
                format: uint32
                type: integer
                x-go-name: Size
        type: object
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    LinuxIntelRdt:
        description: |-
            LinuxIntelRdt has container runtime resource constraints for Intel RDT CAT and MBA
            features and flags enabling Intel RDT CMT and MBM features.
            Intel RDT features are available in Linux 4.14 and newer kernel versions.
        properties:
            closID:
                description: The identity for RDT Class of Service
                type: string
                x-go-name: ClosID
            enableMonitoring:
                description: |-
                    EnableMonitoring enables resctrl monitoring for the container. This will
                    create a dedicated resctrl monitoring group for the container.
                type: boolean
                x-go-name: EnableMonitoring
            l3CacheSchema:
                description: |-
                    The schema for L3 cache id and capacity bitmask (CBM)
                    Format: "L3:<cache_id0>=<cbm0>;<cache_id1>=<cbm1>;..."
                    NOTE: Should not be specified if Schemata is non-empty.
                type: string
                x-go-name: L3CacheSchema
            memBwSchema:
                description: |-
                    The schema of memory bandwidth per L3 cache id
                    Format: "MB:<cache_id0>=bandwidth0;<cache_id1>=bandwidth1;..."
                    The unit of memory bandwidth is specified in "percentages" by
                    default, and in "MBps" if MBA Software Controller is enabled.
                    NOTE: Should not be specified if Schemata is non-empty.
                type: string
                x-go-name: MemBwSchema
            schemata:
                description: |-
                    Schemata specifies the complete schemata to be written as is to the
                    schemata file in resctrl fs. Each element represents a single line in the schemata file.
                    NOTE: This will overwrite schemas specified in the L3CacheSchema and/or
                    MemBwSchema fields.
                items:
                    type: string
                type: array
                x-go-name: Schemata
        type: object
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    LinuxInterfacePriority:
        description: LinuxInterfacePriority for network interfaces
        properties:
            name:
                description: Name is the name of the network interface
                type: string
                x-go-name: Name
            priority:
                description: Priority for the interface
                format: uint32
                type: integer
                x-go-name: Priority
        type: object
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    LinuxMemory:
        description: LinuxMemory for Linux cgroup 'memory' resource management
        properties:
            checkBeforeUpdate:
                description: |-
                    CheckBeforeUpdate enables checking if a new memory limit is lower
                    than the current usage during update, and if so, rejecting the new
                    limit.
                type: boolean
                x-go-name: CheckBeforeUpdate
            disableOOMKiller:
                description: DisableOOMKiller disables the OOM killer for out of memory conditions
                type: boolean
                x-go-name: DisableOOMKiller
            kernel:
                description: |-
                    Kernel memory limit (in bytes).

                    Deprecated: kernel-memory limits are not supported in cgroups v2, and
                    were obsoleted in [kernel v5.4]. This field should no longer be used,
                    as it may be ignored by runtimes.

                    [kernel v5.4]: https://github.com/torvalds/linux/commit/0158115f702b0ba208ab0
                format: int64
                type: integer
                x-go-name: Kernel
            kernelTCP:
                description: Kernel memory limit for tcp (in bytes)
                format: int64
                type: integer
                x-go-name: KernelTCP
            limit:
                description: Memory limit (in bytes).
                format: int64
                type: integer
                x-go-name: Limit
            reservation:
                description: Memory reservation or soft_limit (in bytes).
                format: int64
                type: integer
                x-go-name: Reservation
            swap:
                description: Total memory limit (memory + swap).
                format: int64
                type: integer
                x-go-name: Swap
            swappiness:
                description: How aggressive the kernel will swap memory pages.
                format: uint64
                type: integer
                x-go-name: Swappiness
            useHierarchy:
                description: Enables hierarchical memory accounting
                type: boolean
                x-go-name: UseHierarchy
        type: object
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    LinuxNetwork:
        description: LinuxNetwork identification and priority configuration
        properties:
            classID:
                description: Set class identifier for container's network packets
                format: uint32
                type: integer
                x-go-name: ClassID
            priorities:
                description: Set priority of network traffic for container
                items:
                    $ref: '#/definitions/LinuxInterfacePriority'
                type: array
                x-go-name: Priorities
        type: object
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    LinuxPersonality:
        description: LinuxPersonality represents the Linux personality syscall input
        properties:
            domain:
                $ref: '#/definitions/LinuxPersonalityDomain'
            flags:
                description: Additional flags
                items:
                    $ref: '#/definitions/LinuxPersonalityFlag'
                type: array
                x-go-name: Flags
        type: object
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    LinuxPersonalityDomain:
        title: LinuxPersonalityDomain refers to a personality domain.
        type: string
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    LinuxPersonalityFlag:
        title: LinuxPersonalityFlag refers to an additional personality flag. None are currently defined.
        type: string
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    LinuxPids:
        description: LinuxPids for Linux cgroup 'pids' resource management (Linux 4.3)
        properties:
            limit:
                description: Maximum number of PIDs. Default is "no limit".
                format: int64
                type: integer
                x-go-name: Limit
        type: object
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    LinuxRdma:
        description: LinuxRdma for Linux cgroup 'rdma' resource management (Linux 4.11)
        properties:
            hcaHandles:
                description: Maximum number of HCA handles that can be opened. Default is "no limit".
                format: uint32
                type: integer
                x-go-name: HcaHandles
            hcaObjects:
                description: Maximum number of HCA objects that can be created. Default is "no limit".
                format: uint32
                type: integer
                x-go-name: HcaObjects
        type: object
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    LinuxResources:
        description: LinuxResources has container runtime resource constraints
        properties:
            blockIO:
                $ref: '#/definitions/LinuxBlockIO'
            cpu:
                $ref: '#/definitions/LinuxCPU'
            devices:
                description: Devices configures the device allowlist.
                items:
                    $ref: '#/definitions/LinuxDeviceCgroup'
                type: array
                x-go-name: Devices
            hugepageLimits:
                description: Hugetlb limits (in bytes). Default to reservation limits if supported.
                items:
                    $ref: '#/definitions/LinuxHugepageLimit'
                type: array
                x-go-name: HugepageLimits
            memory:
                $ref: '#/definitions/LinuxMemory'
            network:
                $ref: '#/definitions/LinuxNetwork'
            pids:
                $ref: '#/definitions/LinuxPids'
            rdma:
                additionalProperties:
                    $ref: '#/definitions/LinuxRdma'
                description: |-
                    Rdma resource restriction configuration.
                    Limits are a set of key value pairs that define RDMA resource limits,
                    where the key is device name and value is resource limits.
                type: object
                x-go-name: Rdma
            unified:
                additionalProperties:
                    type: string
                description: Unified resources.
                type: object
                x-go-name: Unified
        type: object
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    LinuxThrottleDevice:
        description: LinuxThrottleDevice struct holds a `major:minor rate_per_second` pair
        properties:
            major:
                description: Major is the device's major number.
                format: int64
                type: integer
                x-go-name: Major
            minor:
                description: Minor is the device's minor number.
                format: int64
                type: integer
                x-go-name: Minor
            rate:
                description: Rate is the IO rate limit per cgroup per device
                format: uint64
                type: integer
                x-go-name: Rate
        type: object
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    LinuxWeightDevice:
        description: LinuxWeightDevice struct holds a `major:minor weight` pair for weightDevice
        properties:
            leafWeight:
                description: LeafWeight is the bandwidth rate for the device while competing with the cgroup's child cgroups, CFQ scheduler only
                format: uint16
                type: integer
                x-go-name: LeafWeight
            major:
                description: Major is the device's major number.
                format: int64
                type: integer
                x-go-name: Major
            minor:
                description: Minor is the device's minor number.
                format: int64
                type: integer
                x-go-name: Minor
            weight:
                description: Weight is the bandwidth rate for the device.
                format: uint16
                type: integer
                x-go-name: Weight
        type: object
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    ListContainer:
        description: ListContainer describes a container suitable for listing
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ListPodsReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ListQuadlet:
        description: A ListQuadlet is a single Quadlet to be listed by `podman quadlet list`
        properties:
            App:
                description: |-
                    If multiple quadlets were installed together they will belong
                    to common App.
                type: string
            Name:
                description: Name is the name of the Quadlet file
                type: string
            Path:
                description: Path to the Quadlet on disk
                type: string
            Pod:
                description: |-
                    Pod is the pod Quadlet file referenced by Pod= in [Container]
                    Empty for quadlet types that do not support Pod=
                type: string
            Status:
                description: |-
                    What is the status of the Quadlet - if present in systemd, will be a
                    systemd status, else will mention if the Quadlet has syntax errors
                type: string
            UnitName:
                description: |-
                    UnitName is the name of the systemd unit created from the Quadlet.
                    May be empty if systemd has not be reloaded since it was installed.
                type: string
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ListResponse:
        description: '# Volume list response'
        properties:
            Volumes:
                description: List of volumes
                items:
                    $ref: '#/definitions/Volume'
                type: array
            Warnings:
                description: Warnings that occurred when fetching the list of volumes.
                example: []
                items:
                    type: string
                type: array
        title: ListResponse VolumeListResponse
        type: object
        x-go-package: github.com/moby/moby/api/types/volume
    LogConfig:
        properties:
            Config:
                additionalProperties:
                    type: string
                type: object
            Type:
                type: string
        title: LogConfig represents the logging configuration of the container.
        type: object
        x-go-package: github.com/moby/moby/api/types/container
    LogConfigLibpod:
        description: LogConfig describes the logging characteristics for a container
        properties:
            driver:
                description: |-
                    LogDriver is the container's log driver.
                    Optional.
                type: string
                x-go-name: Driver
            labels:
                additionalProperties:
                    type: string
                description: |-
                    A set of log labels to apply
                    Only available if LogDriver is set to "journald".
                    Optional
                type: object
                x-go-name: Labels
            options:
                additionalProperties:
                    type: string
                description: |-
                    A set of options to accompany the log driver.
                    Optional.
                type: object
                x-go-name: Options
            path:
                description: |-
                    LogPath is the path the container's logs will be stored at.
                    Only available if LogDriver is set to "json-file" or "k8s-file".
                    Optional.
                type: string
                x-go-name: Path
            size:
                description: |-
                    Size is the maximum size of the log file
                    Optional.
                format: int64
                type: integer
                x-go-name: Size
        type: object
        x-go-name: LogConfig
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    ManifestAddArtifactOptions:
        description: |-
            ManifestAddArtifactOptions provides the model for creating artifact manifests
            for files and adding those manifests to a manifest list
        properties:
            annotation:
                description: Annotation to add to the item in the manifest list
                items:
                    type: string
                type: array
                x-go-name: Annotation
            annotations:
                additionalProperties:
                    type: string
                description: Annotations to add to the item in the manifest list by a map which is preferred over Annotation
                type: object
                x-go-name: Annotations
            arch:
                description: Arch overrides the architecture for the item in the manifest list
                type: string
                x-go-name: Arch
            artifact_annotations:
                additionalProperties:
                    type: string
                type: object
                x-go-name: Annotations
            artifact_config:
                type: string
                x-go-name: Config
            artifact_config_type:
                type: string
                x-go-name: ConfigType
            artifact_exclude_titles:
                type: boolean
                x-go-name: ExcludeTitles
            artifact_files:
                items:
                    type: string
                type: array
                x-go-name: Files
            artifact_layer_type:
                type: string
                x-go-name: LayerType
            artifact_subject:
                type: string
                x-go-name: Subject
            artifact_type:
                description: 'Note to future maintainers: keep these fields synchronized with ManifestModifyOptions!'
                type: string
                x-go-name: Type
            features:
                description: Feature list for the item in the manifest list
                items:
                    type: string
                type: array
                x-go-name: Features
            index_annotation:
                description: IndexAnnotation is a slice of key=value annotations to add to the manifest list itself
                items:
                    type: string
                type: array
                x-go-name: IndexAnnotation
            index_annotations:
                additionalProperties:
                    type: string
                description: IndexAnnotations is a map of key:value annotations to add to the manifest list itself, by a map which is preferred over IndexAnnotation
                type: object
                x-go-name: IndexAnnotations
            os:
                description: OS overrides the operating system for the item in the manifest list
                type: string
                x-go-name: OS
            os_features:
                description: OS features for the item in the manifest list
                items:
                    type: string
                type: array
                x-go-name: OSFeatures
            os_version:
                description: OSVersion overrides the operating system for the item in the manifest list
                type: string
                x-go-name: OSVersion
            subject:
                description: IndexSubject is a subject value to set in the manifest list itself
                type: string
                x-go-name: IndexSubject
            variant:
                description: Variant for the item in the manifest list
                type: string
                x-go-name: Variant
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ManifestAddOptions:
        description: ManifestAddOptions provides model for adding digests to manifest list
        properties:
            all:
                description: True when operating on a list to include all images
                type: boolean
                x-go-name: All
            annotation:
                description: Annotation to add to the item in the manifest list
                items:
                    type: string
                type: array
                x-go-name: Annotation
            annotations:
                additionalProperties:
                    type: string
                description: Annotations to add to the item in the manifest list by a map which is preferred over Annotation
                type: object
                x-go-name: Annotations
            arch:
                description: Arch overrides the architecture for the item in the manifest list
                type: string
                x-go-name: Arch
            features:
                description: Feature list for the item in the manifest list
                items:
                    type: string
                type: array
                x-go-name: Features
            images:
                description: Images is an optional list of image references to add to manifest list
                items:
                    type: string
                type: array
                x-go-name: Images
            index_annotation:
                description: IndexAnnotation is a slice of key=value annotations to add to the manifest list itself
                items:
                    type: string
                type: array
                x-go-name: IndexAnnotation
            index_annotations:
                additionalProperties:
                    type: string
                description: IndexAnnotations is a map of key:value annotations to add to the manifest list itself, by a map which is preferred over IndexAnnotation
                type: object
                x-go-name: IndexAnnotations
            os:
                description: OS overrides the operating system for the item in the manifest list
                type: string
                x-go-name: OS
            os_features:
                description: OS features for the item in the manifest list
                items:
                    type: string
                type: array
                x-go-name: OSFeatures
            os_version:
                description: OSVersion overrides the operating system for the item in the manifest list
                type: string
                x-go-name: OSVersion
            subject:
                description: IndexSubject is a subject value to set in the manifest list itself
                type: string
                x-go-name: IndexSubject
            variant:
                description: Variant for the item in the manifest list
                type: string
                x-go-name: Variant
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ManifestAnnotateOptions:
        description: ManifestAnnotateOptions provides model for annotating manifest list
        properties:
            annotation:
                description: Annotation to add to the item in the manifest list
                items:
                    type: string
                type: array
                x-go-name: Annotation
            annotations:
                additionalProperties:
                    type: string
                description: Annotations to add to the item in the manifest list by a map which is preferred over Annotation
                type: object
                x-go-name: Annotations
            arch:
                description: Arch overrides the architecture for the item in the manifest list
                type: string
                x-go-name: Arch
            features:
                description: Feature list for the item in the manifest list
                items:
                    type: string
                type: array
                x-go-name: Features
            index_annotation:
                description: IndexAnnotation is a slice of key=value annotations to add to the manifest list itself
                items:
                    type: string
                type: array
                x-go-name: IndexAnnotation
            index_annotations:
                additionalProperties:
                    type: string
                description: IndexAnnotations is a map of key:value annotations to add to the manifest list itself, by a map which is preferred over IndexAnnotation
                type: object
                x-go-name: IndexAnnotations
            os:
                description: OS overrides the operating system for the item in the manifest list
                type: string
                x-go-name: OS
            os_features:
                description: OS features for the item in the manifest list
                items:
                    type: string
                type: array
                x-go-name: OSFeatures
            os_version:
                description: OSVersion overrides the operating system for the item in the manifest list
                type: string
                x-go-name: OSVersion
            subject:
                description: IndexSubject is a subject value to set in the manifest list itself
                type: string
                x-go-name: IndexSubject
            variant:
                description: Variant for the item in the manifest list
                type: string
                x-go-name: Variant
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ManifestKind:
        type: string
        x-go-package: github.com/moby/moby/api/types/image
    ManifestModifyOptions:
        description: |-
            swagger 2.0 does not support oneOf for schema validation.

            Operation "update" uses all fields.
            Operation "remove" uses fields: Operation and Images
            Operation "annotate" uses fields: Operation and Annotations
        properties:
            all:
                description: True when operating on a list to include all images
                type: boolean
                x-go-name: All
            annotation:
                description: Annotation to add to the item in the manifest list
                items:
                    type: string
                type: array
                x-go-name: Annotation
            annotations:
                additionalProperties:
                    type: string
                description: Annotations to add to the item in the manifest list by a map which is preferred over Annotation
                type: object
                x-go-name: Annotations
            arch:
                description: Arch overrides the architecture for the item in the manifest list
                type: string
                x-go-name: Arch
            artifact_annotations:
                additionalProperties:
                    type: string
                type: object
                x-go-name: ArtifactAnnotations
            artifact_config:
                type: string
                x-go-name: ArtifactConfig
            artifact_config_type:
                type: string
                x-go-name: ArtifactConfigType
            artifact_exclude_titles:
                type: boolean
                x-go-name: ArtifactExcludeTitles
            artifact_files:
                items:
                    type: string
                type: array
                x-go-name: ArtifactFiles
            artifact_layer_type:
                type: string
                x-go-name: ArtifactLayerType
            artifact_subject:
                type: string
                x-go-name: ArtifactSubject
            artifact_type:
                description: |-
                    The following are all of the fields from ManifestAddArtifactOptions.
                    We can't just embed the whole structure because it embeds a
                    ManifestAnnotateOptions, which would conflict with the one that
                    ManifestAddOptions embeds.
                type: string
                x-go-name: ArtifactType
            features:
                description: Feature list for the item in the manifest list
                items:
                    type: string
                type: array
                x-go-name: Features
            images:
                description: Images is an optional list of image references to add to manifest list
                items:
                    type: string
                type: array
                x-go-name: Images
            index_annotation:
                description: IndexAnnotation is a slice of key=value annotations to add to the manifest list itself
                items:
                    type: string
                type: array
                x-go-name: IndexAnnotation
            index_annotations:
                additionalProperties:
                    type: string
                description: IndexAnnotations is a map of key:value annotations to add to the manifest list itself, by a map which is preferred over IndexAnnotation
                type: object
                x-go-name: IndexAnnotations
            operation:
                type: string
                x-go-name: Operation
            os:
                description: OS overrides the operating system for the item in the manifest list
                type: string
                x-go-name: OS
            os_features:
                description: OS features for the item in the manifest list
                items:
                    type: string
                type: array
                x-go-name: OSFeatures
            os_version:
                description: OSVersion overrides the operating system for the item in the manifest list
                type: string
                x-go-name: OSVersion
            subject:
                description: IndexSubject is a subject value to set in the manifest list itself
                type: string
                x-go-name: IndexSubject
            variant:
                description: Variant for the item in the manifest list
                type: string
                x-go-name: Variant
        title: ManifestModifyOptions provides the model for mutating a manifest
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ManifestModifyReport:
        properties:
            Id:
                description: Manifest List ID
                type: string
                x-go-name: ID
            errors:
                description: Errors associated with operation
                items:
                    type: string
                    x-go-type: error
                type: array
                x-go-name: Errors
            files:
                description: Files added to manifest list, otherwise not provided.
                items:
                    type: string
                type: array
                x-go-name: Files
            images:
                description: Images added to or removed from manifest list, otherwise not provided.
                items:
                    type: string
                type: array
                x-go-name: Images
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities/types
    ManifestPushReport:
        properties:
            Id:
                description: ID of the pushed manifest
                type: string
                x-go-name: ID
            error:
                description: Error contains text of errors from pushing
                type: string
                x-go-name: Error
            stream:
                description: Stream used to provide push progress
                type: string
                x-go-name: Stream
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities/types
    ManifestRemoveOptions:
        description: ManifestRemoveOptions provides the model for removing digests from a manifest
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    ManifestRemoveReport:
        properties:
            Deleted:
                description: Deleted manifest list.
                items:
                    type: string
                type: array
            Errors:
                description: Errors associated with operation
                items:
                    type: string
                type: array
            ExitCode:
                description: |-
                    ExitCode describes the exit codes as described in the `podman rmi`
                    man page.
                format: int64
                type: integer
            Untagged:
                description: Untagged images. Can be longer than Deleted.
                items:
                    type: string
                type: array
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities/types
    ManifestSummary:
        properties:
            AttestationData:
                $ref: '#/definitions/AttestationProperties'
            Available:
                description: |-
                    Indicates whether all the child content (image config, layers) is
                    fully available locally
                type: boolean
            Descriptor:
                $ref: '#/definitions/Descriptor'
            ID:
                description: |-
                    ID is the content-addressable ID of an image and is the same as the
                    digest of the image manifest.
                type: string
            ImageData:
                $ref: '#/definitions/ImageProperties'
            Kind:
                $ref: '#/definitions/ManifestKind'
            Size:
                description: |-
                    Size is the size information of the content related to this manifest.
                    Note: These sizes only take the locally available content into account.
                properties:
                    Content:
                        description: |-
                            Content is the size (in bytes) of all the locally present
                            content in the content store (e.g. image config, layers)
                            referenced by this manifest and its children.
                            This only includes blobs in the content store.
                        format: int64
                        type: integer
                    Total:
                        description: |-
                            Total is the total size (in bytes) of all the locally present
                            data (both distributable and non-distributable) that's related to
                            this manifest and its children.
                            This equal to the sum of [Content] size AND all the sizes in the
                            [Size] struct present in the Kind-specific data struct.
                            For example, for an image kind (Kind == ManifestKindImage),
                            this would include the size of the image content and unpacked
                            image snapshots ([Size.Content] + [ImageData.Size.Unpacked]).
                        format: int64
                        type: integer
                type: object
        required:
            - ID
            - Descriptor
            - Available
            - Size
            - Kind
        type: object
        x-go-package: github.com/moby/moby/api/types/image
    Metadata:
        properties:
            LastTagTime:
                description: LastTagTime is the date and time at which the image was last tagged.
                format: date-time
                type: string
        title: Metadata contains engine-local data about the image.
        type: object
        x-go-package: github.com/moby/moby/api/types/image
    Mount:
        properties:
            BindOptions:
                $ref: '#/definitions/BindOptions'
            ClusterOptions:
                $ref: '#/definitions/ClusterOptions'
            Consistency:
                $ref: '#/definitions/Consistency'
            ImageOptions:
                $ref: '#/definitions/ImageOptions'
            ReadOnly:
                type: boolean
            Source:
                description: |-
                    Source specifies the name of the mount. Depending on mount type, this
                    may be a volume name or a host path, or even ignored.
                    Source is not supported for tmpfs (must be an empty value)
                type: string
            Target:
                type: string
            TmpfsOptions:
                $ref: '#/definitions/TmpfsOptions'
            Type:
                $ref: '#/definitions/Type'
            VolumeOptions:
                $ref: '#/definitions/VolumeOptions'
        title: Mount represents a mount (volume).
        type: object
        x-go-package: github.com/moby/moby/api/types/mount
    MountPoint:
        description: This is used for reporting the mountpoints in use by a container.
        properties:
            Destination:
                description: |-
                    Destination is the path relative to the container root (`/`) where the
                    Source is mounted inside the container.
                type: string
            Driver:
                description: Driver is the volume driver used to create the volume (if it is a volume).
                type: string
            Mode:
                description: |-
                    Mode is a comma separated list of options supplied by the user when
                    creating the bind/volume mount.

                    The default is platform-specific (`"z"` on Linux, empty on Windows).
                type: string
            Name:
                description: |-
                    Name is the name reference to the underlying data defined by `Source`
                    e.g., the volume name.
                type: string
            Propagation:
                $ref: '#/definitions/Propagation'
            RW:
                description: RW indicates whether the mount is mounted writable (read-write).
                type: boolean
            Source:
                description: |-
                    Source is the source location of the mount.

                    For volumes, this contains the storage location of the volume (within
                    `/var/lib/docker/volumes/`). For bind-mounts, and `npipe`, this contains
                    the source (host) part of the bind-mount. For `tmpfs` mount points, this
                    field is empty.
                type: string
            Type:
                $ref: '#/definitions/Type'
        title: MountPoint represents a mount point configuration inside the container.
        type: object
        x-go-package: github.com/moby/moby/api/types/container
    NamedVolume:
        description: |-
            NamedVolume holds information about a named volume that will be mounted into
            the container.
        properties:
            Dest:
                description: |-
                    Destination to mount the named volume within the container. Must be
                    an absolute path. Path will be created if it does not exist.
                type: string
            IsAnonymous:
                description: |-
                    IsAnonymous sets the named volume as anonymous even if it has a name
                    This is used for emptyDir volumes from a kube yaml
                type: boolean
            Name:
                description: |-
                    Name is the name of the named volume to be mounted. May be empty.
                    If empty, a new named volume with a pseudorandomly generated name
                    will be mounted at the given destination.
                type: string
            Options:
                description: Options are options that the named volume will be mounted with.
                items:
                    type: string
                type: array
            SubPath:
                description: SubPath stores the sub directory of the named volume to be mounted in the container
                type: string
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    Namespace:
        description: Namespace describes the namespace
        properties:
            nsmode:
                $ref: '#/definitions/NamespaceMode'
            value:
                type: string
                x-go-name: Value
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    NamespaceMode:
        type: string
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    NetOptions:
        description: |-
            NetOptions reflect the shared network options between
            pods and containers
        properties:
            dns_option:
                items:
                    type: string
                type: array
                x-go-name: DNSOptions
            dns_search:
                items:
                    type: string
                type: array
                x-go-name: DNSSearch
            dns_server:
                items:
                    type: string
                    x-go-type: net.IP
                type: array
                x-go-name: DNSServers
            hostadd:
                items:
                    type: string
                type: array
                x-go-name: AddHosts
            hosts_file:
                type: string
                x-go-name: HostsFile
            netns:
                $ref: '#/definitions/Namespace'
            network_alias:
                items:
                    type: string
                type: array
                x-go-name: Aliases
            network_options:
                additionalProperties:
                    items:
                        type: string
                    type: array
                description: NetworkOptions are additional options for each network
                type: object
                x-go-name: NetworkOptions
            network_order:
                items:
                    type: string
                type: array
                x-go-name: NetworkOrder
            networks:
                additionalProperties:
                    $ref: '#/definitions/PerNetworkOptions'
                type: object
                x-go-name: Networks
            no_manage_hostname:
                type: boolean
                x-go-name: NoHostname
            no_manage_hosts:
                type: boolean
                x-go-name: NoHosts
            no_manage_resolv_conf:
                type: boolean
                x-go-name: UseImageResolvConf
            portmappings:
                items:
                    $ref: '#/definitions/PortMapping'
                type: array
                x-go-name: PublishPorts
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    Network:
        properties:
            created:
                description: Created contains the timestamp when this network was created.
                format: date-time
                type: string
                x-go-name: Created
            dns_enabled:
                description: |-
                    DNSEnabled is whether name resolution is active for container on
                    this Network. Only supported with the bridge driver.
                type: boolean
                x-go-name: DNSEnabled
            driver:
                description: Driver for this Network, e.g. bridge, macvlan...
                type: string
                x-go-name: Driver
            id:
                description: ID of the Network.
                type: string
                x-go-name: ID
            internal:
                description: |-
                    Internal is whether the Network should not have external routes
                    to public or other Networks.
                type: boolean
                x-go-name: Internal
            ipam_options:
                additionalProperties:
                    type: string
                description: IPAMOptions contains options used for the ip assignment.
                type: object
                x-go-name: IPAMOptions
            ipv6_enabled:
                description: IPv6Enabled if set to true an ipv6 subnet should be created for this net.
                type: boolean
                x-go-name: IPv6Enabled
            labels:
                additionalProperties:
                    type: string
                description: |-
                    Labels is a set of key-value labels that have been applied to the
                    Network.
                type: object
                x-go-name: Labels
            name:
                description: Name of the Network.
                type: string
                x-go-name: Name
            network_dns_servers:
                description: |-
                    List of custom DNS server for podman's DNS resolver at network level,
                    all the containers attached to this network will consider resolvers
                    configured at network level.
                items:
                    type: string
                type: array
                x-go-name: NetworkDNSServers
            network_interface:
                description: NetworkInterface is the network interface name on the host.
                type: string
                x-go-name: NetworkInterface
            options:
                additionalProperties:
                    type: string
                description: |-
                    Options is a set of key-value options that have been applied to
                    the Network.
                type: object
                x-go-name: Options
            routes:
                description: Routes to use for this network.
                items:
                    $ref: '#/definitions/Route'
                type: array
                x-go-name: Routes
            subnets:
                description: Subnets to use for this network.
                items:
                    $ref: '#/definitions/Subnet'
                type: array
                x-go-name: Subnets
        title: Network describes the Network attributes.
        type: object
        x-go-package: go.podman.io/common/libnetwork/types
    NetworkBackend:
        type: string
        x-go-package: go.podman.io/common/libnetwork/types
    NetworkConnectOptions:
        description: |-
            NetworkConnectOptions describes options for connecting
            a container to a network
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    NetworkInfo:
        properties:
            backend:
                $ref: '#/definitions/NetworkBackend'
            defaultNetwork:
                type: string
                x-go-name: DefaultNetwork
            dns:
                $ref: '#/definitions/DNSNetworkInfo'
            package:
                type: string
                x-go-name: Package
            path:
                type: string
                x-go-name: Path
            version:
                type: string
                x-go-name: Version
        title: NetworkInfo contains the network information.
        type: object
        x-go-package: go.podman.io/common/libnetwork/types
    NetworkInspectReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    NetworkMode:
        title: NetworkMode represents the container network stack.
        type: string
        x-go-package: github.com/moby/moby/api/types/container
    NetworkPruneReport:
        description: |-
            NetworkPruneReport containers the name of network and an error
            associated in its pruning (removal)
        properties:
            Error:
                type: string
                x-go-type: error
            Name:
                type: string
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities/types
    NetworkRmReport:
        description: NetworkRmReport describes the results of network removal
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    NetworkSettings:
        description: NetworkSettings exposes the network settings in the api
        properties:
            Networks:
                additionalProperties:
                    $ref: '#/definitions/EndpointSettings'
                type: object
            Ports:
                $ref: '#/definitions/PortMap'
            SandboxID:
                type: string
            SandboxKey:
                type: string
        type: object
        x-go-package: github.com/moby/moby/api/types/container
    NetworkSettingsSummary:
        description: |-
            NetworkSettingsSummary provides a summary of container's networks
            in /containers/json
        properties:
            Networks:
                additionalProperties:
                    $ref: '#/definitions/EndpointSettings'
                type: object
        type: object
        x-go-package: github.com/moby/moby/api/types/container
    NetworkUpdateOptions:
        description: NetworkUpdateOptions describes options to update a network
        properties:
            adddnsservers:
                items:
                    type: string
                type: array
                x-go-name: AddDNSServers
            removednsservers:
                items:
                    type: string
                type: array
                x-go-name: RemoveDNSServers
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    NetworkingConfig:
        description: |-
            NetworkingConfig represents the container's networking configuration for each of its interfaces
            Carries the networking configs specified in the `docker run` and `docker network connect` commands
        properties:
            EndpointsConfig:
                additionalProperties:
                    $ref: '#/definitions/EndpointSettings'
                type: object
        type: object
        x-go-package: github.com/moby/moby/api/types/network
    OCIRuntimeInfo:
        description: |-
            OCIRuntimeInfo describes the runtime (crun or runc) being
            used with podman
        properties:
            name:
                type: string
                x-go-name: Name
            package:
                type: string
                x-go-name: Package
            path:
                type: string
                x-go-name: Path
            version:
                type: string
                x-go-name: Version
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    OverlayVolume:
        description: |-
            OverlayVolume holds information about an overlay volume that will be mounted into
            the container.
        properties:
            destination:
                description: Destination is the absolute path where the mount will be placed in the container.
                type: string
                x-go-name: Destination
            options:
                description: Options holds overlay volume options.
                items:
                    type: string
                type: array
                x-go-name: Options
            source:
                description: Source specifies the source path of the mount.
                type: string
                x-go-name: Source
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    POSIXRlimit:
        description: POSIXRlimit type and restrictions
        properties:
            hard:
                description: Hard is the hard limit for the specified type
                format: uint64
                type: integer
                x-go-name: Hard
            soft:
                description: Soft is the soft limit for the specified type
                format: uint64
                type: integer
                x-go-name: Soft
            type:
                description: Type of the rlimit to set
                type: string
                x-go-name: Type
        type: object
        x-go-package: github.com/opencontainers/runtime-spec/specs-go
    PastaInfo:
        description: PastaInfo describes the pasta executable that is being used
        properties:
            executable:
                type: string
                x-go-name: Executable
            package:
                type: string
                x-go-name: Package
            version:
                type: string
                x-go-name: Version
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    PeerInfo:
        properties:
            IP:
                description: IP-address of the peer-node in the Swarm cluster.
                example: 10.133.77.91
                type: string
                x-go-type: net/netip.Addr
            Name:
                description: ID of the peer-node in the Swarm cluster.
                example: 6869d7c1732b
                type: string
        title: PeerInfo represents one peer of an overlay network.
        type: object
        x-go-package: github.com/moby/moby/api/types/network
    PerNetworkOptions:
        properties:
            aliases:
                description: |-
                    Aliases contains a list of names which the dns server should resolve
                    to this container. Should only be set when DNSEnabled is true on the Network.
                    If aliases are set but there is no dns support for this network the
                    network interface implementation should ignore this and NOT error.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: Aliases
            interface_name:
                description: |-
                    InterfaceName for this container. Required in the backend.
                    Optional in the frontend. Will be filled with ethX (where X is a integer) when empty.
                type: string
                x-go-name: InterfaceName
            options:
                additionalProperties:
                    type: string
                description: Driver-specific options for this container.
                type: object
                x-go-name: Options
            static_ips:
                description: StaticIPs for this container. Optional.
                items:
                    type: string
                    x-go-type: net.IP
                type: array
                x-go-name: StaticIPs
            static_mac:
                description: StaticMac for this container. Optional.
                format: string
                type: string
                x-go-name: StaticMAC
                x-go-type: go.podman.io/common/libnetwork/types.HardwareAddr
        title: PerNetworkOptions are options which should be set on a per network basis.
        type: object
        x-go-package: go.podman.io/common/libnetwork/types
    PidMode:
        title: PidMode represents the pid namespace of the container.
        type: string
        x-go-package: github.com/moby/moby/api/types/container
    Platform:
        properties:
            architecture:
                description: |-
                    Architecture field specifies the CPU architecture, for example
                    `amd64` or `ppc64le`.
                type: string
                x-go-name: Architecture
            os:
                description: OS specifies the operating system, for example `linux` or `windows`.
                type: string
                x-go-name: OS
            os.features:
                description: |-
                    OSFeatures is an optional field specifying an array of strings,
                    each listing a required OS feature (for example on Windows `win32k`).
                items:
                    type: string
                type: array
                x-go-name: OSFeatures
            os.version:
                description: |-
                    OSVersion is an optional field specifying the operating system
                    version, for example on Windows `10.0.14393.1066`.
                type: string
                x-go-name: OSVersion
            variant:
                description: |-
                    Variant is an optional field specifying a variant of the CPU, for
                    example `v7` to specify ARMv7 when architecture is `arm`.
                type: string
                x-go-name: Variant
        title: Platform describes the platform which the image in the manifest runs on.
        type: object
        x-go-package: github.com/opencontainers/image-spec/specs-go/v1
    PlayKubeReport:
        title: PlayKubeReport contains the results of running play kube.
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    Plugins:
        properties:
            authorization:
                description: Authorization is provided for compatibility, will always be nil as Podman has no daemon
                items:
                    type: string
                type: array
                x-go-name: Authorization
            log:
                items:
                    type: string
                type: array
                x-go-name: Log
            network:
                items:
                    type: string
                type: array
                x-go-name: Network
            volume:
                items:
                    type: string
                type: array
                x-go-name: Volume
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    PodBasicConfig:
        properties:
            exit_policy:
                description: ExitPolicy determines the pod's exit and stop behaviour.
                type: string
                x-go-name: ExitPolicy
            hostname:
                description: |-
                    Hostname is the pod's hostname. If not set, the name of the pod will
                    be used (if a name was not provided here, the name auto-generated for
                    the pod will be used). This will be used by the infra container and
                    all containers in the pod as long as the UTS namespace is shared.
                    Optional.
                type: string
                x-go-name: Hostname
            infra_command:
                description: |-
                    InfraCommand sets the command that will be used to start the infra
                    container.
                    If not set, the default set in the Libpod configuration file will be
                    used.
                    Conflicts with NoInfra=true.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: InfraCommand
            infra_conmon_pid_file:
                description: |-
                    InfraConmonPidFile is a custom path to store the infra container's
                    conmon PID.
                type: string
                x-go-name: InfraConmonPidFile
            infra_image:
                description: |-
                    InfraImage is the image that will be used for the infra container.
                    If not set, the default set in the Libpod configuration file will be
                    used.
                    Conflicts with NoInfra=true.
                    Optional.
                type: string
                x-go-name: InfraImage
            infra_name:
                description: |-
                    InfraName is the name that will be used for the infra container.
                    If not set, the default set in the Libpod configuration file will be
                    used.
                    Conflicts with NoInfra=true.
                    Optional.
                type: string
                x-go-name: InfraName
            ipcns:
                $ref: '#/definitions/Namespace'
            labels:
                additionalProperties:
                    type: string
                description: |-
                    Labels are key-value pairs that are used to add metadata to pods.
                    Optional.
                type: object
                x-go-name: Labels
            name:
                description: |-
                    Name is the name of the pod.
                    If not provided, a name will be generated when the pod is created.
                    Optional.
                type: string
                x-go-name: Name
            no_infra:
                description: |-
                    NoInfra tells the pod not to create an infra container. If this is
                    done, many networking-related options will become unavailable.
                    Conflicts with setting any options in PodNetworkConfig, and the
                    InfraCommand and InfraImages in this struct.
                    Optional.
                type: boolean
                x-go-name: NoInfra
            pidns:
                $ref: '#/definitions/Namespace'
            pod_create_command:
                items:
                    type: string
                type: array
                x-go-name: PodCreateCommand
            pod_devices:
                description: Devices contains user specified Devices to be added to the Pod
                items:
                    type: string
                type: array
                x-go-name: Devices
            restart_policy:
                description: |-
                    RestartPolicy is the pod's restart policy - an action which
                    will be taken when one or all the containers in the pod exits.
                    If not given, the default policy will be set to Always, which
                    restarts the containers in the pod when they exit indefinitely.
                    Optional.
                type: string
                x-go-name: RestartPolicy
            restart_tries:
                description: |-
                    RestartRetries is the number of attempts that will be made to restart
                    the container.
                    Only available when RestartPolicy is set to "on-failure".
                    Optional.
                format: uint64
                type: integer
                x-go-name: RestartRetries
            share_parent:
                description: |-
                    PodCreateCommand is the command used to create this pod.
                    This will be shown in the output of Inspect() on the pod, and may
                    also be used by some tools that wish to recreate the pod
                    (e.g. `podman generate systemd --new`).
                    Optional.
                    ShareParent determines if all containers in the pod will share the pod's cgroup as the cgroup parent
                type: boolean
                x-go-name: ShareParent
            shared_namespaces:
                description: |-
                    SharedNamespaces instructs the pod to share a set of namespaces.
                    Shared namespaces will be joined (by default) by every container
                    which joins the pod.
                    If not set and NoInfra is false, the pod will set a default set of
                    namespaces to share.
                    Conflicts with NoInfra=true.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: SharedNamespaces
            sysctl:
                additionalProperties:
                    type: string
                description: Sysctl sets kernel parameters for the pod
                type: object
                x-go-name: Sysctl
            userns:
                $ref: '#/definitions/Namespace'
            utsns:
                $ref: '#/definitions/Namespace'
        title: PodBasicConfig contains basic configuration options for pods.
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    PodCgroupConfig:
        description: This will be expanded in future updates to pods.
        properties:
            cgroup_parent:
                description: |-
                    CgroupParent is the parent for the Cgroup that the pod will create.
                    This pod cgroup will, in turn, be the default cgroup parent for all
                    containers in the pod.
                    Optional.
                type: string
                x-go-name: CgroupParent
        title: PodCgroupConfig contains configuration options about a pod's cgroups.
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    PodCreateOptions:
        description: The JSON tags below are made to match the respective field in ContainerCreateOptions for the purpose of mapping.
        properties:
            cgroup_parent:
                type: string
                x-go-name: CgroupParent
            container_command:
                type: string
                x-go-name: InfraCommand
            container_conmon_pidfile:
                type: string
                x-go-name: InfraConmonPidFile
            container_name:
                type: string
                x-go-name: InfraName
            cpus:
                format: double
                type: number
                x-go-name: Cpus
            cpuset_cpus:
                type: string
                x-go-name: CpusetCpus
            create_command:
                items:
                    type: string
                type: array
                x-go-name: CreateCommand
            device_read_bps:
                items:
                    type: string
                type: array
                x-go-name: DeviceReadBPs
            devices:
                items:
                    type: string
                type: array
                x-go-name: Devices
            exit_policy:
                type: string
                x-go-name: ExitPolicy
            hostname:
                type: string
                x-go-name: Hostname
            infra:
                type: boolean
                x-go-name: Infra
            infra_image:
                type: string
                x-go-name: InfraImage
            ipc:
                type: string
                x-go-name: Ipc
            labels:
                additionalProperties:
                    type: string
                type: object
                x-go-name: Labels
            name:
                type: string
                x-go-name: Name
            net:
                $ref: '#/definitions/NetOptions'
            pid:
                type: string
                x-go-name: Pid
            restart:
                type: string
                x-go-name: Restart
            security_opt:
                items:
                    type: string
                type: array
                x-go-name: SecurityOpt
            share:
                items:
                    type: string
                type: array
                x-go-name: Share
            share_parent:
                type: boolean
                x-go-name: ShareParent
            sysctl:
                items:
                    type: string
                type: array
                x-go-name: Sysctl
            uts:
                type: string
                x-go-name: Uts
            volume:
                items:
                    type: string
                type: array
                x-go-name: Volume
            volumes_from:
                items:
                    type: string
                type: array
                x-go-name: VolumesFrom
        title: PodCreateOptions provides all possible options for creating a pod and its infra container.
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    PodKillReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    PodNetworkConfig:
        properties:
            Networks:
                additionalProperties:
                    $ref: '#/definitions/PerNetworkOptions'
                description: |-
                    Map of networks names to ids the container should join to.
                    You can request additional settings for each network, you can
                    set network aliases, static ips, static mac address  and the
                    network interface name for this container on the specific network.
                    If the map is empty and the bridge network mode is set the container
                    will be joined to the default network.
                type: object
            dns_option:
                description: |-
                    DNSOption is a set of DNS options that will be used in the infra
                    container's resolv.conf, which will, by default, be shared with all
                    containers in the pod.
                    Conflicts with NoInfra=true.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: DNSOption
            dns_search:
                description: |-
                    DNSSearch is a set of DNS search domains that will be used in the
                    infra container's resolv.conf, which will, by default, be shared with
                    all containers in the pod.
                    If not provided, DNS search domains from the host's resolv.conf will
                    be used.
                    Conflicts with NoInfra=true.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: DNSSearch
            dns_server:
                description: |-
                    DNSServer is a set of DNS servers that will be used in the infra
                    container's resolv.conf, which will, by default, be shared with all
                    containers in the pod.
                    If not provided, the host's DNS servers will be used, unless the only
                    server set is a localhost address. As the container cannot connect to
                    the host's localhost, a default server will instead be set.
                    Conflicts with NoInfra=true.
                    Optional.
                items:
                    type: string
                    x-go-type: net.IP
                type: array
                x-go-name: DNSServer
            hostadd:
                description: |-
                    HostAdd is a set of hosts that will be added to the infra container's
                    etc/hosts that will, by default, be shared with all containers in
                    the pod.
                    Conflicts with NoInfra=true and NoManageHosts.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: HostAdd
            hostsFile:
                description: |-
                    HostsFile is the base file to create the `/etc/hosts` file inside the infra container.
                    This must either be an absolute path to a file on the host system, or one of the
                    special flags `image` or `none`.
                    If it is empty it defaults to the base_hosts_file configuration in containers.conf.
                    Conflicts with NoInfra=true and NoManageHosts.
                    Optional.
                type: string
                x-go-name: HostsFile
            netns:
                $ref: '#/definitions/Namespace'
            network_options:
                additionalProperties:
                    items:
                        type: string
                    type: array
                description: |-
                    NetworkOptions are additional options for each network
                    Optional.
                type: object
                x-go-name: NetworkOptions
            no_manage_hostname:
                description: |-
                    NoManageHostname indicates that /etc/hostname should not be managed
                    by the pod. Instead, each container will create a separate
                    etc/hostname as they would if not in a pod.
                type: boolean
                x-go-name: NoManageHostname
            no_manage_hosts:
                description: |-
                    NoManageHosts indicates that /etc/hosts should not be managed by the
                    pod. Instead, each container will create a separate /etc/hosts as
                    they would if not in a pod.
                    Conflicts with HostAdd.
                type: boolean
                x-go-name: NoManageHosts
            no_manage_resolv_conf:
                description: |-
                    NoManageResolvConf indicates that /etc/resolv.conf should not be
                    managed by the pod. Instead, each container will create and manage a
                    separate resolv.conf as if they had not joined a pod.
                    Conflicts with NoInfra=true and DNSServer, DNSSearch, DNSOption.
                    Optional.
                type: boolean
                x-go-name: NoManageResolvConf
            portmappings:
                description: |-
                    PortMappings is a set of ports to map into the infra container.
                    As, by default, containers share their network with the infra
                    container, this will forward the ports to the entire pod.
                    Only available if NetNS is set to Bridge or Pasta.
                    Optional.
                items:
                    $ref: '#/definitions/PortMapping'
                type: array
                x-go-name: PortMappings
        title: PodNetworkConfig contains networking configuration for a pod.
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    PodPauseReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    PodPruneReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    PodResourceConfig:
        properties:
            resource_limits:
                $ref: '#/definitions/LinuxResources'
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    PodRestartReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    PodRmReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    PodSecurityConfig:
        properties:
            idmappings:
                $ref: '#/definitions/IDMappingOptions'
            security_opt:
                items:
                    type: string
                type: array
                x-go-name: SecurityOpt
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    PodSpecGenerator:
        description: PodSpecGenerator describes options to create a pod
        properties:
            Networks:
                additionalProperties:
                    $ref: '#/definitions/PerNetworkOptions'
                description: |-
                    Map of networks names to ids the container should join to.
                    You can request additional settings for each network, you can
                    set network aliases, static ips, static mac address  and the
                    network interface name for this container on the specific network.
                    If the map is empty and the bridge network mode is set the container
                    will be joined to the default network.
                type: object
            cgroup_parent:
                description: |-
                    CgroupParent is the parent for the Cgroup that the pod will create.
                    This pod cgroup will, in turn, be the default cgroup parent for all
                    containers in the pod.
                    Optional.
                type: string
                x-go-name: CgroupParent
            dns_option:
                description: |-
                    DNSOption is a set of DNS options that will be used in the infra
                    container's resolv.conf, which will, by default, be shared with all
                    containers in the pod.
                    Conflicts with NoInfra=true.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: DNSOption
            dns_search:
                description: |-
                    DNSSearch is a set of DNS search domains that will be used in the
                    infra container's resolv.conf, which will, by default, be shared with
                    all containers in the pod.
                    If not provided, DNS search domains from the host's resolv.conf will
                    be used.
                    Conflicts with NoInfra=true.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: DNSSearch
            dns_server:
                description: |-
                    DNSServer is a set of DNS servers that will be used in the infra
                    container's resolv.conf, which will, by default, be shared with all
                    containers in the pod.
                    If not provided, the host's DNS servers will be used, unless the only
                    server set is a localhost address. As the container cannot connect to
                    the host's localhost, a default server will instead be set.
                    Conflicts with NoInfra=true.
                    Optional.
                items:
                    type: string
                    x-go-type: net.IP
                type: array
                x-go-name: DNSServer
            exit_policy:
                description: ExitPolicy determines the pod's exit and stop behaviour.
                type: string
                x-go-name: ExitPolicy
            hostadd:
                description: |-
                    HostAdd is a set of hosts that will be added to the infra container's
                    etc/hosts that will, by default, be shared with all containers in
                    the pod.
                    Conflicts with NoInfra=true and NoManageHosts.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: HostAdd
            hostname:
                description: |-
                    Hostname is the pod's hostname. If not set, the name of the pod will
                    be used (if a name was not provided here, the name auto-generated for
                    the pod will be used). This will be used by the infra container and
                    all containers in the pod as long as the UTS namespace is shared.
                    Optional.
                type: string
                x-go-name: Hostname
            hostsFile:
                description: |-
                    HostsFile is the base file to create the `/etc/hosts` file inside the infra container.
                    This must either be an absolute path to a file on the host system, or one of the
                    special flags `image` or `none`.
                    If it is empty it defaults to the base_hosts_file configuration in containers.conf.
                    Conflicts with NoInfra=true and NoManageHosts.
                    Optional.
                type: string
                x-go-name: HostsFile
            idmappings:
                $ref: '#/definitions/IDMappingOptions'
            image_volumes:
                description: |-
                    Image volumes bind-mount a container-image mount into the pod's infra container.
                    Optional.
                items:
                    $ref: '#/definitions/ImageVolume'
                type: array
                x-go-name: ImageVolumes
            infra_command:
                description: |-
                    InfraCommand sets the command that will be used to start the infra
                    container.
                    If not set, the default set in the Libpod configuration file will be
                    used.
                    Conflicts with NoInfra=true.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: InfraCommand
            infra_conmon_pid_file:
                description: |-
                    InfraConmonPidFile is a custom path to store the infra container's
                    conmon PID.
                type: string
                x-go-name: InfraConmonPidFile
            infra_image:
                description: |-
                    InfraImage is the image that will be used for the infra container.
                    If not set, the default set in the Libpod configuration file will be
                    used.
                    Conflicts with NoInfra=true.
                    Optional.
                type: string
                x-go-name: InfraImage
            infra_name:
                description: |-
                    InfraName is the name that will be used for the infra container.
                    If not set, the default set in the Libpod configuration file will be
                    used.
                    Conflicts with NoInfra=true.
                    Optional.
                type: string
                x-go-name: InfraName
            ipcns:
                $ref: '#/definitions/Namespace'
            labels:
                additionalProperties:
                    type: string
                description: |-
                    Labels are key-value pairs that are used to add metadata to pods.
                    Optional.
                type: object
                x-go-name: Labels
            mounts:
                description: |-
                    Mounts are mounts that will be added to the pod.
                    These will supersede Image Volumes and VolumesFrom volumes where
                    there are conflicts.
                    Optional.
                items:
                    $ref: '#/definitions/Mount'
                type: array
                x-go-name: Mounts
            name:
                description: |-
                    Name is the name of the pod.
                    If not provided, a name will be generated when the pod is created.
                    Optional.
                type: string
                x-go-name: Name
            netns:
                $ref: '#/definitions/Namespace'
            network_options:
                additionalProperties:
                    items:
                        type: string
                    type: array
                description: |-
                    NetworkOptions are additional options for each network
                    Optional.
                type: object
                x-go-name: NetworkOptions
            no_infra:
                description: |-
                    NoInfra tells the pod not to create an infra container. If this is
                    done, many networking-related options will become unavailable.
                    Conflicts with setting any options in PodNetworkConfig, and the
                    InfraCommand and InfraImages in this struct.
                    Optional.
                type: boolean
                x-go-name: NoInfra
            no_manage_hostname:
                description: |-
                    NoManageHostname indicates that /etc/hostname should not be managed
                    by the pod. Instead, each container will create a separate
                    etc/hostname as they would if not in a pod.
                type: boolean
                x-go-name: NoManageHostname
            no_manage_hosts:
                description: |-
                    NoManageHosts indicates that /etc/hosts should not be managed by the
                    pod. Instead, each container will create a separate /etc/hosts as
                    they would if not in a pod.
                    Conflicts with HostAdd.
                type: boolean
                x-go-name: NoManageHosts
            no_manage_resolv_conf:
                description: |-
                    NoManageResolvConf indicates that /etc/resolv.conf should not be
                    managed by the pod. Instead, each container will create and manage a
                    separate resolv.conf as if they had not joined a pod.
                    Conflicts with NoInfra=true and DNSServer, DNSSearch, DNSOption.
                    Optional.
                type: boolean
                x-go-name: NoManageResolvConf
            overlay_volumes:
                description: |-
                    Overlay volumes are named volumes that will be added to the pod.
                    Optional.
                items:
                    $ref: '#/definitions/OverlayVolume'
                type: array
                x-go-name: OverlayVolumes
            pidns:
                $ref: '#/definitions/Namespace'
            pod_create_command:
                items:
                    type: string
                type: array
                x-go-name: PodCreateCommand
            pod_devices:
                description: Devices contains user specified Devices to be added to the Pod
                items:
                    type: string
                type: array
                x-go-name: Devices
            portmappings:
                description: |-
                    PortMappings is a set of ports to map into the infra container.
                    As, by default, containers share their network with the infra
                    container, this will forward the ports to the entire pod.
                    Only available if NetNS is set to Bridge or Pasta.
                    Optional.
                items:
                    $ref: '#/definitions/PortMapping'
                type: array
                x-go-name: PortMappings
            resource_limits:
                $ref: '#/definitions/LinuxResources'
            restart_policy:
                description: |-
                    RestartPolicy is the pod's restart policy - an action which
                    will be taken when one or all the containers in the pod exits.
                    If not given, the default policy will be set to Always, which
                    restarts the containers in the pod when they exit indefinitely.
                    Optional.
                type: string
                x-go-name: RestartPolicy
            restart_tries:
                description: |-
                    RestartRetries is the number of attempts that will be made to restart
                    the container.
                    Only available when RestartPolicy is set to "on-failure".
                    Optional.
                format: uint64
                type: integer
                x-go-name: RestartRetries
            security_opt:
                items:
                    type: string
                type: array
                x-go-name: SecurityOpt
            serviceContainerID:
                description: The ID of the pod's service container.
                type: string
                x-go-name: ServiceContainerID
            share_parent:
                description: |-
                    PodCreateCommand is the command used to create this pod.
                    This will be shown in the output of Inspect() on the pod, and may
                    also be used by some tools that wish to recreate the pod
                    (e.g. `podman generate systemd --new`).
                    Optional.
                    ShareParent determines if all containers in the pod will share the pod's cgroup as the cgroup parent
                type: boolean
                x-go-name: ShareParent
            shared_namespaces:
                description: |-
                    SharedNamespaces instructs the pod to share a set of namespaces.
                    Shared namespaces will be joined (by default) by every container
                    which joins the pod.
                    If not set and NoInfra is false, the pod will set a default set of
                    namespaces to share.
                    Conflicts with NoInfra=true.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: SharedNamespaces
            shm_size:
                description: |-
                    ShmSize is the size of the tmpfs to mount in at /dev/shm, in bytes.
                    Conflicts with ShmSize if IpcNS is not private.
                    Optional.
                format: int64
                type: integer
                x-go-name: ShmSize
            shm_size_systemd:
                description: |-
                    ShmSizeSystemd is the size of systemd-specific tmpfs mounts
                    specifically /run, /run/lock, /var/log/journal and /tmp.
                    Optional
                format: int64
                type: integer
                x-go-name: ShmSizeSystemd
            sysctl:
                additionalProperties:
                    type: string
                description: Sysctl sets kernel parameters for the pod
                type: object
                x-go-name: Sysctl
            userns:
                $ref: '#/definitions/Namespace'
            utsns:
                $ref: '#/definitions/Namespace'
            volumes:
                description: |-
                    Volumes are named volumes that will be added to the pod.
                    These will supersede Image Volumes and VolumesFrom  volumes where
                    there are conflicts.
                    Optional.
                items:
                    $ref: '#/definitions/NamedVolume'
                type: array
                x-go-name: Volumes
            volumes_from:
                description: |-
                    VolumesFrom is a set of containers whose volumes will be added to
                    this pod. The name or ID of the container must be provided, and
                    may optionally be followed by a : and then one or more
                    comma-separated options. Valid options are 'ro', 'rw', and 'z'.
                    Options will be used for all volumes sourced from the container.
                items:
                    type: string
                type: array
                x-go-name: VolumesFrom
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    PodStartReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    PodStatsReport:
        title: PodStatsReport includes pod-resource statistics data.
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    PodStopReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    PodStorageConfig:
        properties:
            image_volumes:
                description: |-
                    Image volumes bind-mount a container-image mount into the pod's infra container.
                    Optional.
                items:
                    $ref: '#/definitions/ImageVolume'
                type: array
                x-go-name: ImageVolumes
            mounts:
                description: |-
                    Mounts are mounts that will be added to the pod.
                    These will supersede Image Volumes and VolumesFrom volumes where
                    there are conflicts.
                    Optional.
                items:
                    $ref: '#/definitions/Mount'
                type: array
                x-go-name: Mounts
            overlay_volumes:
                description: |-
                    Overlay volumes are named volumes that will be added to the pod.
                    Optional.
                items:
                    $ref: '#/definitions/OverlayVolume'
                type: array
                x-go-name: OverlayVolumes
            shm_size:
                description: |-
                    ShmSize is the size of the tmpfs to mount in at /dev/shm, in bytes.
                    Conflicts with ShmSize if IpcNS is not private.
                    Optional.
                format: int64
                type: integer
                x-go-name: ShmSize
            shm_size_systemd:
                description: |-
                    ShmSizeSystemd is the size of systemd-specific tmpfs mounts
                    specifically /run, /run/lock, /var/log/journal and /tmp.
                    Optional
                format: int64
                type: integer
                x-go-name: ShmSizeSystemd
            volumes:
                description: |-
                    Volumes are named volumes that will be added to the pod.
                    These will supersede Image Volumes and VolumesFrom  volumes where
                    there are conflicts.
                    Optional.
                items:
                    $ref: '#/definitions/NamedVolume'
                type: array
                x-go-name: Volumes
            volumes_from:
                description: |-
                    VolumesFrom is a set of containers whose volumes will be added to
                    this pod. The name or ID of the container must be provided, and
                    may optionally be followed by a : and then one or more
                    comma-separated options. Valid options are 'ro', 'rw', and 'z'.
                    Options will be used for all volumes sourced from the container.
                items:
                    type: string
                type: array
                x-go-name: VolumesFrom
        title: PodStorageConfig contains all of the storage related options for the pod and its infra container.
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    PodTopOKBody:
        properties:
            Processes:
                description: |-
                    Each process running in the container, where each process
                    is an array of values corresponding to the titles.
                example: '{"Processes":[["root","13642","882","0","17:03","pts/0","00:00:00","/bin/bash"],["root","13735","13642","0","17:06","pts/0","00:00:00","sleep 10"]]}'
                items:
                    items:
                        type: string
                    type: array
                type: array
            Titles:
                description: The ps column titles
                example: '{"Titles":["UID","PID","PPID","C","STIME","TTY","TIME","CMD"]}'
                items:
                    type: string
                type: array
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/api/handlers
    PodUnpauseReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    PortMap:
        additionalProperties:
            items:
                properties:
                    HostIp:
                        description: HostIP is the host IP Address
                        type: string
                        x-go-name: HostIP
                        x-go-type: net/netip.Addr
                    HostPort:
                        description: HostPort is the host port number
                        type: string
                type: object
            type: array
        title: PortMap is a collection of [PortBinding] indexed by [Port].
        type: object
        x-go-package: github.com/moby/moby/api/types/network
    PortMapping:
        properties:
            container_port:
                description: |-
                    ContainerPort is the port number that will be exposed from the
                    container.
                    Mandatory.
                format: uint16
                type: integer
                x-go-name: ContainerPort
            host_ip:
                description: |-
                    HostIP is the IP that we will bind to on the host.
                    If unset, assumed to be 0.0.0.0 (all interfaces).
                type: string
                x-go-name: HostIP
            host_port:
                description: |-
                    HostPort is the port number that will be forwarded from the host into
                    the container.
                    If omitted, a random port on the host (guaranteed to be over 1024)
                    will be assigned.
                format: uint16
                type: integer
                x-go-name: HostPort
            protocol:
                description: |-
                    Protocol is the protocol forward.
                    Must be either "tcp", "udp", and "sctp", or some combination of these
                    separated by commas.
                    If unset, assumed to be TCP.
                type: string
                x-go-name: Protocol
            range:
                description: |-
                    Range is the number of ports that will be forwarded, starting at
                    HostPort and ContainerPort and counting up.
                    This is 1-indexed, so 1 is assumed to be a single port (only the
                    Hostport:Containerport mapping will be added), 2 is two ports (both
                    Hostport:Containerport and Hostport+1:Containerport+1), etc.
                    If unset, assumed to be 1 (a single port).
                    Both hostport + range and containerport + range must be less than
                    65536.
                format: uint16
                type: integer
                x-go-name: Range
        title: PortMapping is one or more ports that will be mapped into the container.
        type: object
        x-go-package: go.podman.io/common/libnetwork/types
    PortSet:
        additionalProperties:
            type: object
        title: PortSet is a collection of structs indexed by [Port].
        type: object
        x-go-package: github.com/moby/moby/api/types/network
    PortSummary:
        example: '{"PrivatePort":8080,"PublicPort":80,"Type":"tcp"}'
        properties:
            IP:
                description: Host IP address that the container's port is mapped to
                type: string
                x-go-type: net/netip.Addr
            PrivatePort:
                description: Port on the container
                format: uint16
                type: integer
            PublicPort:
                description: Port exposed on the host
                format: uint16
                type: integer
            Type:
                description: type
                enum:
                    - tcp
                    - udp
                    - sctp
                type: string
        required:
            - PrivatePort
            - Type
        title: PortSummary Describes a port-mapping between the container and the host.
        type: object
        x-go-package: github.com/moby/moby/api/types/container
    Propagation:
        title: Propagation represents the propagation of a mount.
        type: string
        x-go-package: github.com/moby/moby/api/types/mount
    PruneReport:
        description: POST "/volumes/prune"
        properties:
            Err:
                type: string
                x-go-type: error
            Id:
                type: string
            Size:
                format: uint64
                type: integer
        title: 'PruneReport contains the response for Engine API:'
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities/reports
    PublishState:
        description: |-
            PublishState represents the state of a Volume as it pertains to its
            use on a particular Node.
        type: string
        x-go-package: github.com/moby/moby/api/types/volume
    PublishStatus:
        description: |-
            PublishStatus represents the status of the volume as published to an
            individual node
        properties:
            NodeID:
                description: NodeID is the ID of the swarm node this Volume is published to.
                type: string
            PublishContext:
                additionalProperties:
                    type: string
                description: |-
                    PublishContext is the PublishContext returned by the CSI plugin when
                    a volume is published.
                type: object
            State:
                $ref: '#/definitions/PublishState'
        type: object
        x-go-package: github.com/moby/moby/api/types/volume
    PullIdentity:
        description: If image was pulled via mirror, this contains the original repository location.
        properties:
            Repository:
                description: Repository is the remote repository location the image was pulled from.
                type: string
        title: PullIdentity contains remote location information if image was created via pull.
        type: object
        x-go-package: github.com/moby/moby/api/types/image
    QuadletRemoveReport:
        description: QuadletRemoveReport contains the results of an operation to remove obe or more quadlets
        properties:
            Errors:
                additionalProperties:
                    type: string
                    x-go-type: error
                description: Errors is a map of Quadlet name to error that occurred during removal.
                type: object
            Removed:
                description: Removed is a list of quadlets that were successfully removed
                items:
                    type: string
                type: array
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    RemoteSocket:
        description: RemoteSocket describes information about the API socket
        properties:
            exists:
                type: boolean
                x-go-name: Exists
            path:
                type: string
                x-go-name: Path
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    Resources:
        description: Resources contains container's resources (cgroups config, ulimits...)
        properties:
            BlkioDeviceReadBps:
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            BlkioDeviceReadIOps:
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            BlkioDeviceWriteBps:
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            BlkioDeviceWriteIOps:
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            BlkioWeight:
                format: uint16
                type: integer
            BlkioWeightDevice:
                items:
                    $ref: '#/definitions/WeightDevice'
                type: array
            CgroupParent:
                description: Applicable to UNIX platforms
                type: string
            CpuCount:
                description: Applicable to Windows
                format: int64
                type: integer
                x-go-name: CPUCount
            CpuPercent:
                format: int64
                type: integer
                x-go-name: CPUPercent
            CpuPeriod:
                format: int64
                type: integer
                x-go-name: CPUPeriod
            CpuQuota:
                format: int64
                type: integer
                x-go-name: CPUQuota
            CpuRealtimePeriod:
                format: int64
                type: integer
                x-go-name: CPURealtimePeriod
            CpuRealtimeRuntime:
                format: int64
                type: integer
                x-go-name: CPURealtimeRuntime
            CpuShares:
                description: Applicable to all platforms
                format: int64
                type: integer
                x-go-name: CPUShares
            CpusetCpus:
                type: string
            CpusetMems:
                type: string
            DeviceCgroupRules:
                items:
                    type: string
                type: array
            DeviceRequests:
                items:
                    $ref: '#/definitions/DeviceRequest'
                type: array
            Devices:
                items:
                    $ref: '#/definitions/DeviceMapping'
                type: array
            IOMaximumBandwidth:
                format: uint64
                type: integer
            IOMaximumIOps:
                format: uint64
                type: integer
            Memory:
                format: int64
                type: integer
            MemoryReservation:
                format: int64
                type: integer
            MemorySwap:
                format: int64
                type: integer
            MemorySwappiness:
                format: int64
                type: integer
            NanoCpus:
                format: int64
                type: integer
                x-go-name: NanoCPUs
            OomKillDisable:
                type: boolean
            PidsLimit:
                format: int64
                type: integer
            Ulimits:
                items:
                    $ref: '#/definitions/Ulimit'
                type: array
        type: object
        x-go-package: github.com/moby/moby/api/types/container
    RestartPolicy:
        properties:
            MaximumRetryCount:
                format: int64
                type: integer
            Name:
                $ref: '#/definitions/RestartPolicyMode'
        title: RestartPolicy represents the restart policies of the container.
        type: object
        x-go-package: github.com/moby/moby/api/types/container
    RestartPolicyMode:
        type: string
        x-go-package: github.com/moby/moby/api/types/container
    RootFS:
        properties:
            Layers:
                items:
                    $ref: '#/definitions/Digest'
                    type: string
                type: array
            Type:
                type: string
        title: RootFS holds the root fs information of an image.
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/inspect
    RootFSStorage:
        properties:
            Snapshot:
                $ref: '#/definitions/RootFSStorageSnapshot'
        title: RootFSStorage Information about the storage used for the container's root filesystem.
        type: object
        x-go-package: github.com/moby/moby/api/types/storage
    RootFSStorageSnapshot:
        properties:
            Name:
                description: Name of the snapshotter.
                type: string
        title: RootFSStorageSnapshot Information about a snapshot backend of the container's root filesystem.
        type: object
        x-go-package: github.com/moby/moby/api/types/storage
    Route:
        properties:
            destination:
                description: Destination for this route in CIDR form.
                format: string
                type: string
                x-go-name: Destination
            gateway:
                description: Gateway IP for this route. Required for unicast routes, must be empty for blackhole/unreachable/prohibit.
                format: string
                type: string
                x-go-name: Gateway
                x-go-type: net.IP
            metric:
                description: Metric for this route. Optional.
                format: uint32
                type: integer
                x-go-name: Metric
            route_type:
                $ref: '#/definitions/RouteType'
        type: object
        x-go-package: go.podman.io/common/libnetwork/types
    RouteType:
        title: RouteType represents the type of a route.
        type: string
        x-go-package: go.podman.io/common/libnetwork/types
    Schema2HealthConfig:
        description: |-
            Schema2HealthConfig is a HealthConfig, which holds configuration settings
            for the HEALTHCHECK feature, from docker/docker/api/types/container.
        properties:
            Interval:
                $ref: '#/definitions/Duration'
            Retries:
                description: |-
                    Retries is the number of consecutive failures needed to consider a container as unhealthy.
                    Zero means inherit.
                format: int64
                type: integer
            StartInterval:
                $ref: '#/definitions/Duration'
            StartPeriod:
                $ref: '#/definitions/Duration'
            Test:
                description: |-
                    Test is the test to perform to check that the container is healthy.
                    An empty slice means to inherit the default.
                    The options are:
                    {} : inherit healthcheck
                    {"NONE"} : disable healthcheck
                    {"CMD", args...} : exec arguments directly
                    {"CMD-SHELL", command} : run command with system's default shell
                items:
                    type: string
                type: array
            Timeout:
                $ref: '#/definitions/Duration'
        type: object
        x-go-package: go.podman.io/image/v5/manifest
    Schema2List:
        title: Schema2List is a list of platform-specific manifests.
        type: object
        x-go-package: go.podman.io/image/v5/manifest
    Scope:
        description: |-
            Scope defines the Scope of a Cluster Volume. This is how many nodes a
            Volume can be accessed simultaneously on.
        type: string
        x-go-package: github.com/moby/moby/api/types/volume
    ScpReport:
        properties:
            Id:
                type: string
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities/reports
    Secret:
        properties:
            GID:
                format: uint32
                type: integer
            Mode:
                format: uint32
                type: integer
            Source:
                type: string
            Target:
                type: string
            UID:
                format: uint32
                type: integer
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    SecretCreate:
        properties:
            Data:
                description: Base64-url-safe-encoded (RFC 4648) data to store as secret.
                type: string
            Driver:
                $ref: '#/definitions/SecretDriverSpec'
            Labels:
                additionalProperties:
                    type: string
                description: Labels are labels on the secret
                type: object
            Name:
                description: User-defined name of the secret.
                type: string
        type: object
        x-go-name: SecretCreateRequest
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    SecretCreateReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    SecretDriverSpec:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    SecretInfoReport:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    SecretInfoReportCompat:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    SecurityInfo:
        description: SecurityInfo describes the libpod host
        properties:
            apparmorEnabled:
                type: boolean
                x-go-name: AppArmorEnabled
            capabilities:
                type: string
                x-go-name: DefaultCapabilities
            rootless:
                type: boolean
                x-go-name: Rootless
            seccompEnabled:
                type: boolean
                x-go-name: SECCOMPEnabled
            seccompProfilePath:
                type: string
                x-go-name: SECCOMPProfilePath
            selinuxEnabled:
                type: boolean
                x-go-name: SELinuxEnabled
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    ServiceInfo:
        description: ServiceInfo represents service parameters with the list of service's tasks
        properties:
            LocalLBIndex:
                description: local l b index
                format: int64
                type: integer
            Ports:
                description: ports
                items:
                    type: string
                type: array
            Tasks:
                description: tasks
                items:
                    $ref: '#/definitions/Task'
                type: array
            VIP:
                description: v IP
                type: string
                x-go-type: net/netip.Addr
        type: object
        x-go-package: github.com/moby/moby/api/types/network
    SharingMode:
        description: |-
            SharingMode defines the Sharing of a Cluster Volume. This is how Tasks using a
            Volume at the same time can use it.
        type: string
        x-go-package: github.com/moby/moby/api/types/volume
    Signal:
        description: It implements the [os.Signal] interface.
        format: int64
        title: A Signal is a number describing a process signal.
        type: integer
        x-go-package: syscall
    SignatureIdentity:
        properties:
            DockerReference:
                description: |-
                    DockerReference is the Docker image reference associated with the signature.
                    This is an optional field only present in older hashedrecord signatures.
                type: string
            Error:
                description: |-
                    Error contains error information if signature verification failed.
                    Other fields will be empty in this case.
                type: string
            KnownSigner:
                $ref: '#/definitions/KnownSignerIdentity'
            Name:
                description: Name is a textual description summarizing the type of signature.
                type: string
            SignatureType:
                $ref: '#/definitions/SignatureType'
            Signer:
                $ref: '#/definitions/SignerIdentity'
            Timestamps:
                description: Timestamps contains a list of verified signed timestamps for the signature.
                items:
                    $ref: '#/definitions/SignatureTimestamp'
                type: array
            Warnings:
                description: |-
                    Warnings contains any warnings that occurred during signature verification.
                    For example, if there was no internet connectivity and cached trust roots were used.
                    Warning does not indicate a failed verification but may point to configuration issues.
                items:
                    type: string
                type: array
        title: SignatureIdentity contains the properties of verified signatures for the image.
        type: object
        x-go-package: github.com/moby/moby/api/types/image
    SignatureTimestamp:
        properties:
            Timestamp:
                format: date-time
                type: string
            Type:
                $ref: '#/definitions/SignatureTimestampType'
            URI:
                type: string
        title: SignatureTimestamp contains information about a verified signed timestamp for an image signature.
        type: object
        x-go-package: github.com/moby/moby/api/types/image
    SignatureTimestampType:
        title: SignatureTimestampType is the type of timestamp used in the signature.
        type: string
        x-go-package: github.com/moby/moby/api/types/image
    SignatureType:
        title: SignatureType is the type of signature format.
        type: string
        x-go-package: github.com/moby/moby/api/types/image
    SignerIdentity:
        description: '[certificate.Summary]: https://pkg.go.dev/github.com/sigstore/sigstore-go/pkg/fulcio/certificate#Summary'
        properties:
            BuildConfigDigest:
                description: Immutable reference to the specific version of the top-level/initiating build instructions.
                type: string
            BuildConfigURI:
                description: Build Config URL to the top-level/initiating build instructions.
                type: string
            BuildSignerDigest:
                description: Immutable reference to the specific version of the build instructions that is responsible for signing.
                type: string
            BuildSignerURI:
                description: Reference to specific build instructions that are responsible for signing.
                type: string
            BuildTrigger:
                description: Event or action that initiated the build.
                type: string
            CertificateIssuer:
                type: string
            Issuer:
                description: |-
                    The OIDC issuer. Should match `iss` claim of ID token or, in the case of
                    a federated login like Dex it should match the issuer URL of the
                    upstream issuer. The issuer is not set the extensions are invalid and
                    will fail to render.
                type: string
            RunInvocationURI:
                description: Run Invocation URL to uniquely identify the build execution.
                type: string
            RunnerEnvironment:
                description: Specifies whether the build took place in platform-hosted cloud infrastructure or customer/self-hosted infrastructure.
                type: string
            SourceRepositoryDigest:
                description: Immutable reference to a specific version of the source code that the build was based upon.
                type: string
            SourceRepositoryIdentifier:
                description: Immutable identifier for the source repository the workflow was based upon.
                type: string
            SourceRepositoryOwnerIdentifier:
                description: Immutable identifier for the owner of the source repository that the workflow was based upon.
                type: string
            SourceRepositoryOwnerURI:
                description: Source repository owner URL of the owner of the source repository that the build was based on.
                type: string
            SourceRepositoryRef:
                description: Source Repository Ref that the build run was based upon.
                type: string
            SourceRepositoryURI:
                description: Source repository URL that the build was based on.
                type: string
            SourceRepositoryVisibilityAtSigning:
                description: Source repository visibility at the time of signing the certificate.
                type: string
            SubjectAlternativeName:
                type: string
        title: |-
            SignerIdentity contains information about the signer certificate used to sign the image.
            This is [certificate.Summary] with deprecated fields removed and keys in Moby uppercase style.
        type: object
        x-go-package: github.com/moby/moby/api/types/image
    SpecGenerator:
        description: |-
            SpecGenerator creates an OCI spec and Libpod configuration options to create
            a container based on the given configuration.
        properties:
            Networks:
                additionalProperties:
                    $ref: '#/definitions/PerNetworkOptions'
                description: |-
                    Map of networks names or ids that the container should join.
                    You can request additional settings for each network, you can
                    set network aliases, static ips, static mac address  and the
                    network interface name for this container on the specific network.
                    If the map is empty and the bridge network mode is set the container
                    will be joined to the default network.
                    Optional.
                type: object
            annotations:
                additionalProperties:
                    type: string
                description: |-
                    Annotations are key-value options passed into the container runtime
                    that can be used to trigger special behavior.
                    Optional.
                type: object
                x-go-name: Annotations
            apparmor_profile:
                description: |-
                    ApparmorProfile is the name of the Apparmor profile the container
                    will use.
                    Optional.
                type: string
                x-go-name: ApparmorProfile
            artifact_volumes:
                description: ArtifactVolumes volumes based on an existing artifact.
                items:
                    $ref: '#/definitions/ArtifactVolume'
                type: array
                x-go-name: ArtifactVolumes
            base_hosts_file:
                description: |-
                    BaseHostsFile is the base file to create the `/etc/hosts` file inside the container.
                    This must either be an absolute path to a file on the host system, or one of the
                    special flags `image` or `none`.
                    If it is empty it defaults to the base_hosts_file configuration in containers.conf.
                    Optional.
                type: string
                x-go-name: BaseHostsFile
            cap_add:
                description: |-
                    CapAdd are capabilities which will be added to the container.
                    Conflicts with Privileged.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: CapAdd
            cap_drop:
                description: |-
                    CapDrop are capabilities which will be removed from the container.
                    Conflicts with Privileged.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: CapDrop
            cgroup_parent:
                description: |-
                    CgroupParent is the container's Cgroup parent.
                    If not set, the default for the current cgroup driver will be used.
                    Optional.
                type: string
                x-go-name: CgroupParent
            cgroupns:
                $ref: '#/definitions/Namespace'
            cgroups_mode:
                description: |-
                    CgroupsMode sets a policy for how cgroups will be created for the
                    container, including the ability to disable creation entirely.
                    Optional.
                type: string
                x-go-name: CgroupsMode
            chroot_directories:
                description: |-
                    ChrootDirs is an additional set of directories that need to be
                    treated as root directories. Standard bind mounts will be mounted
                    into paths relative to these directories.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: ChrootDirs
            command:
                description: |-
                    Command is the container's command.
                    If not given and Image is specified, this will be populated by the
                    image's configuration.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: Command
            conmon_pid_file:
                description: |-
                    ConmonPidFile is a path at which a PID file for Conmon will be
                    placed.
                    If not given, a default location will be used.
                    Optional.
                type: string
                x-go-name: ConmonPidFile
            containerCreateCommand:
                description: |-
                    ContainerCreateCommand is the command that was used to create this
                    container.
                    This will be shown in the output of Inspect() on the container, and
                    may also be used by some tools that wish to recreate the container
                    (e.g. `podman generate systemd --new`).
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: ContainerCreateCommand
            create_working_dir:
                description: |-
                    Create the working directory if it doesn't exist.
                    If unset, it doesn't create it.
                    Optional.
                type: boolean
                x-go-name: CreateWorkingDir
            dependencyContainers:
                description: |-
                    DependencyContainers is an array of containers this container
                    depends on. Dependency containers must be started before this
                    container. Dependencies can be specified by name or full/partial ID.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: DependencyContainers
            device_cgroup_rule:
                description: |-
                    DeviceCgroupRule are device cgroup rules that allow containers
                    to use additional types of devices.
                items:
                    $ref: '#/definitions/LinuxDeviceCgroup'
                type: array
                x-go-name: DeviceCgroupRule
            devices:
                description: |-
                    Devices are devices that will be added to the container.
                    Optional.
                items:
                    $ref: '#/definitions/LinuxDevice'
                type: array
                x-go-name: Devices
            devices_from:
                description: |-
                    DevicesFrom specifies that this container will mount the device(s) from other container(s).
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: DevicesFrom
            dns_option:
                description: |-
                    DNSOptions is a set of DNS options that will be used in the
                    container's resolv.conf, replacing the host's DNS options which are
                    used by default.
                    Conflicts with UseImageResolvConf.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: DNSOptions
            dns_search:
                description: |-
                    DNSSearch is a set of DNS search domains that will be used in the
                    container's resolv.conf, replacing the host's DNS search domains
                    which are used by default.
                    Conflicts with UseImageResolvConf.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: DNSSearch
            dns_server:
                description: |-
                    DNSServers is a set of DNS servers that will be used in the
                    container's resolv.conf, replacing the host's DNS Servers which are
                    used by default.
                    Conflicts with UseImageResolvConf.
                    Optional.
                items:
                    type: string
                    x-go-type: net.IP
                type: array
                x-go-name: DNSServers
            entrypoint:
                description: |-
                    Entrypoint is the container's entrypoint.
                    If not given and Image is specified, this will be populated by the
                    image's configuration.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: Entrypoint
            env:
                additionalProperties:
                    type: string
                description: |-
                    Env is a set of environment variables that will be set in the
                    container.
                    Optional.
                type: object
                x-go-name: Env
            env_host:
                description: |-
                    EnvHost indicates that the host environment should be added to container
                    Optional.
                type: boolean
                x-go-name: EnvHost
            envmerge:
                description: |-
                    EnvMerge takes the specified environment variables from image and preprocess them before injecting them into the
                    container.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: EnvMerge
            expose:
                description: |-
                    Expose is a number of ports that will be forwarded to the container
                    if PublishExposedPorts is set.
                    Expose is a map of uint16 (port number) to a string representing
                    protocol i.e map[uint16]string. Allowed protocols are "tcp", "udp", and "sctp", or some
                    combination of the three separated by commas.
                    If protocol is set to "" we will assume TCP.
                    Only available if NetNS is set to Bridge or Pasta, and
                    PublishExposedPorts is set.
                    Optional.
                x-go-name: Expose
            gpus:
                description: |-
                    GPUs contains GPU device identifiers for CDI resolution.
                    These will be resolved to full CDI device paths on the server side.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: GPUs
            group_entry:
                description: |-
                    GroupEntry specifies an arbitrary string to append to the container's /etc/group file.
                    Optional.
                type: string
                x-go-name: GroupEntry
            groups:
                description: |-
                    Groups are a list of supplemental groups the container's user will
                    be granted access to.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: Groups
            health_check_on_failure_action:
                $ref: '#/definitions/HealthCheckOnFailureAction'
            healthLogDestination:
                description: |-
                    HealthLogDestination defines the destination where the log is stored.
                    TODO (6.0): In next major release convert it to pointer and use omitempty
                type: string
                x-go-name: HealthLogDestination
            healthMaxLogCount:
                description: |-
                    HealthMaxLogCount is maximum number of attempts in the HealthCheck log file.
                    ('0' value means an infinite number of attempts in the log file).
                    TODO (6.0): In next major release convert it to pointer and use omitempty
                format: uint64
                type: integer
                x-go-name: HealthMaxLogCount
            healthMaxLogSize:
                description: |-
                    HealthMaxLogSize is the maximum length in characters of stored HealthCheck log
                    ("0" value means an infinite log length).
                    TODO (6.0): In next major release convert it to pointer and use omitempty
                format: uint64
                type: integer
                x-go-name: HealthMaxLogSize
            healthconfig:
                $ref: '#/definitions/Schema2HealthConfig'
            host_device_list:
                description: HostDeviceList is used to recreate the mounted device on inherited containers
                items:
                    $ref: '#/definitions/LinuxDevice'
                type: array
                x-go-name: HostDeviceList
            hostadd:
                description: |-
                    HostAdd is a set of hosts which will be added to the container's
                    etc/hosts file.
                    Conflicts with UseImageHosts.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: HostAdd
            hostname:
                description: |-
                    Hostname is the container's hostname. If not set, the hostname will
                    not be modified (if UtsNS is not private) or will be set to the
                    container ID (if UtsNS is private).
                    Conflicts with UtsNS if UtsNS is not set to private.
                    Optional.
                type: string
                x-go-name: Hostname
            hostusers:
                description: |-
                    HostUsers is a list of host usernames or UIDs to add to the container
                    etc/passwd file
                items:
                    type: string
                type: array
                x-go-name: HostUsers
            httpproxy:
                description: |-
                    EnvHTTPProxy indicates that the http host proxy environment variables
                    should be added to container
                    Optional.
                type: boolean
                x-go-name: HTTPProxy
            idmappings:
                $ref: '#/definitions/IDMappingOptions'
            image:
                description: |-
                    Image is the image the container will be based on. The image will be
                    used as the container's root filesystem, and its environment vars,
                    volumes, and other configuration will be applied to the container.
                    Conflicts with Rootfs.
                    At least one of Image or Rootfs must be specified.
                type: string
                x-go-name: Image
            image_arch:
                description: |-
                    ImageArch is the user-specified image architecture.
                    Used to select a different variant from a manifest list.
                    Optional.
                type: string
                x-go-name: ImageArch
            image_os:
                description: |-
                    ImageOS is the user-specified OS of the image.
                    Used to select a different variant from a manifest list.
                    Optional.
                type: string
                x-go-name: ImageOS
            image_variant:
                description: |-
                    ImageVariant is the user-specified image variant.
                    Used to select a different variant from a manifest list.
                    Optional.
                type: string
                x-go-name: ImageVariant
            image_volume_mode:
                description: |-
                    ImageVolumeMode indicates how image volumes will be created.
                    Supported modes are "ignore" (do not create), "tmpfs" (create as
                    tmpfs), and "anonymous" (create as anonymous volumes).
                    The default if unset is anonymous.
                    Optional.
                type: string
                x-go-name: ImageVolumeMode
            image_volumes:
                description: |-
                    Image volumes bind-mount a container-image mount into the container.
                    Optional.
                items:
                    $ref: '#/definitions/ImageVolume'
                type: array
                x-go-name: ImageVolumes
            init:
                description: |-
                    Init specifies that an init binary will be mounted into the
                    container, and will be used as PID1.
                    Optional.
                type: boolean
                x-go-name: Init
            init_container_type:
                description: |-
                    InitContainerType describes if this container is an init container
                    and if so, what type: always or once.
                    Optional.
                type: string
                x-go-name: InitContainerType
            init_path:
                description: |-
                    InitPath specifies the path to the init binary that will be added if
                    Init is specified above. If not specified, the default set in the
                    Libpod config will be used. Ignored if Init above is not set.
                    Optional.
                type: string
                x-go-name: InitPath
            intelRdt:
                $ref: '#/definitions/LinuxIntelRdt'
            ipcns:
                $ref: '#/definitions/Namespace'
            label_nested:
                description: |-
                    LabelNested indicates whether or not the container is allowed to
                    run fully nested containers including SELinux labelling.
                    Optional.
                type: boolean
                x-go-name: LabelNested
            labels:
                additionalProperties:
                    type: string
                description: |-
                    Labels are key-value pairs that are used to add metadata to
                    containers.
                    Optional.
                type: object
                x-go-name: Labels
            log_configuration:
                $ref: '#/definitions/LogConfigLibpod'
            manage_password:
                description: Passwd is a container run option that determines if we are validating users/groups before running the container
                type: boolean
                x-go-name: Passwd
            mask:
                description: |-
                    Mask is the path we want to mask in the container. This masks the paths
                    given in addition to the default list.
                    Optional
                items:
                    type: string
                type: array
                x-go-name: Mask
            mounts:
                description: |-
                    Mounts are mounts that will be added to the container.
                    These will supersede Image Volumes and VolumesFrom volumes where
                    there are conflicts.
                    Optional.
                items:
                    $ref: '#/definitions/Mount'
                type: array
                x-go-name: Mounts
            name:
                description: |-
                    Name is the name the container will be given.
                    If no name is provided, one will be randomly generated.
                    Optional.
                type: string
                x-go-name: Name
            netns:
                $ref: '#/definitions/Namespace'
            network_options:
                additionalProperties:
                    items:
                        type: string
                    type: array
                description: |-
                    NetworkOptions are additional options for each network
                    Optional.
                type: object
                x-go-name: NetworkOptions
            networkOrder:
                description: |-
                    The order that networks will be configured in.
                    If not set, alphabetical order based on network name will be used.
                    If set: Must be the same length as Networks and its contents must be every key in the Networks map.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: NetworkOrder
            no_new_privileges:
                description: |-
                    NoNewPrivileges is whether the container will set the no new
                    privileges flag on create, which disables gaining additional
                    privileges (e.g. via setuid) in the container.
                    Optional.
                type: boolean
                x-go-name: NoNewPrivileges
            oci_runtime:
                description: |-
                    OCIRuntime is the name of the OCI runtime that will be used to create
                    the container.
                    If not specified, the default will be used.
                    Optional.
                type: string
                x-go-name: OCIRuntime
            oom_score_adj:
                description: |-
                    OOMScoreAdj adjusts the score used by the OOM killer to determine
                    processes to kill for the container's process.
                    Optional.
                format: int64
                type: integer
                x-go-name: OOMScoreAdj
            overlay_volumes:
                description: |-
                    Overlay volumes are named volumes that will be added to the container.
                    Optional.
                items:
                    $ref: '#/definitions/OverlayVolume'
                type: array
                x-go-name: OverlayVolumes
            passwd_entry:
                description: |-
                    PasswdEntry specifies an arbitrary string to append to the container's /etc/passwd file.
                    Optional.
                type: string
                x-go-name: PasswdEntry
            personality:
                $ref: '#/definitions/LinuxPersonality'
            pidns:
                $ref: '#/definitions/Namespace'
            pod:
                description: |-
                    Pod is the ID of the pod the container will join.
                    Optional.
                type: string
                x-go-name: Pod
            portmappings:
                description: |-
                    PortBindings is a set of ports to map into the container.
                    Only available if NetNS is set to bridge or pasta.
                    Optional.
                items:
                    $ref: '#/definitions/PortMapping'
                type: array
                x-go-name: PortMappings
            privileged:
                description: |-
                    Privileged is whether the container is privileged.
                    Privileged does the following:
                    Adds all devices on the system to the container.
                    Adds all capabilities to the container.
                    Disables Seccomp, SELinux, and Apparmor confinement.
                    (Though SELinux can be manually re-enabled).
                    TODO: this conflicts with things.
                    TODO: this does more.
                    Optional.
                type: boolean
                x-go-name: Privileged
            procfs_opts:
                description: ProcOpts are the options used for the proc mount.
                items:
                    type: string
                type: array
                x-go-name: ProcOpts
            publish_image_ports:
                description: |-
                    PublishExposedPorts will publish ports specified in the image to
                    random unused ports (guaranteed to be above 1024) on the host.
                    This is based on ports set in Expose below, and any ports specified
                    by the Image (if one is given).
                    Only available if NetNS is set to Bridge or Pasta.
                    Optional.
                type: boolean
                x-go-name: PublishExposedPorts
            r_limits:
                description: |-
                    Rlimits are POSIX rlimits to apply to the container.
                    Optional.
                items:
                    $ref: '#/definitions/POSIXRlimit'
                type: array
                x-go-name: Rlimits
            raw_image_name:
                description: |-
                    RawImageName is the user-specified and unprocessed input referring
                    to a local or a remote image.
                    Optional, but strongly encouraged to be set if Image is set.
                type: string
                x-go-name: RawImageName
            read_only_filesystem:
                description: |-
                    ReadOnlyFilesystem indicates that everything will be mounted
                    as read-only.
                    Optional.
                type: boolean
                x-go-name: ReadOnlyFilesystem
            read_write_tmpfs:
                description: |-
                    ReadWriteTmpfs indicates that when running with a ReadOnlyFilesystem
                    mount temporary file systems.
                    Optional.
                type: boolean
                x-go-name: ReadWriteTmpfs
            remove:
                description: |-
                    Remove indicates if the container should be removed once it has been started
                    and exits.
                    Optional.
                type: boolean
                x-go-name: Remove
            removeImage:
                description: |-
                    RemoveImage indicates that the container should remove the image it
                    was created from after it exits.
                    Only allowed if Remove is set to true and Image, not Rootfs, is in
                    use.
                    Optional.
                type: boolean
                x-go-name: RemoveImage
            resource_limits:
                $ref: '#/definitions/LinuxResources'
            restart_policy:
                description: |-
                    RestartPolicy is the container's restart policy - an action which
                    will be taken when the container exits.
                    If not given, the default policy, which does nothing, will be used.
                    Optional.
                type: string
                x-go-name: RestartPolicy
            restart_tries:
                description: |-
                    RestartRetries is the number of attempts that will be made to restart
                    the container.
                    Only available when RestartPolicy is set to "on-failure".
                    Optional.
                format: uint64
                type: integer
                x-go-name: RestartRetries
            rootfs:
                description: |-
                    Rootfs is the path to a directory that will be used as the
                    container's root filesystem. No modification will be made to the
                    directory, it will be directly mounted into the container as root.
                    Conflicts with Image.
                    At least one of Image or Rootfs must be specified.
                type: string
                x-go-name: Rootfs
            rootfs_mapping:
                description: |-
                    RootfsMapping specifies if there are UID/GID mappings to apply to the rootfs.
                    Optional.
                type: string
                x-go-name: RootfsMapping
            rootfs_overlay:
                description: |-
                    RootfsOverlay tells if rootfs is actually an overlay on top of base path.
                    Optional.
                type: boolean
                x-go-name: RootfsOverlay
            rootfs_propagation:
                description: |-
                    RootfsPropagation is the rootfs propagation mode for the container.
                    If not set, the default of rslave will be used.
                    Optional.
                type: string
                x-go-name: RootfsPropagation
            sdnotifyMode:
                description: |-
                    Determine how to handle the NOTIFY_SOCKET - do we participate or pass it through
                    "container" - let the OCI runtime deal with it, advertise conmon's MAINPID
                    "conmon-only" - advertise conmon's MAINPID, send READY when started, don't pass to OCI
                    "ignore" - unset NOTIFY_SOCKET
                    Optional.
                type: string
                x-go-name: SdNotifyMode
            seccomp_policy:
                description: |-
                    SeccompPolicy determines which seccomp profile gets applied
                    the container. valid values: empty,default,image
                type: string
                x-go-name: SeccompPolicy
            seccomp_profile_path:
                description: |-
                    SeccompProfilePath is the path to a JSON file containing the
                    container's Seccomp profile.
                    If not specified, no Seccomp profile will be used.
                    Optional.
                type: string
                x-go-name: SeccompProfilePath
            secret_env:
                additionalProperties:
                    type: string
                description: |-
                    EnvSecrets are secrets that will be set as environment variables
                    Optional.
                type: object
                x-go-name: EnvSecrets
            secrets:
                description: |-
                    Secrets are the secrets that will be added to the container
                    Optional.
                items:
                    $ref: '#/definitions/Secret'
                type: array
                x-go-name: Secrets
            selinux_opts:
                description: |-
                    SelinuxProcessLabel is the process label the container will use.
                    If SELinux is enabled and this is not specified, a label will be
                    automatically generated if not specified.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: SelinuxOpts
            shm_size:
                description: |-
                    ShmSize is the size of the tmpfs to mount in at /dev/shm, in bytes.
                    Conflicts with ShmSize if IpcNS is not private.
                    Optional.
                format: int64
                type: integer
                x-go-name: ShmSize
            shm_size_systemd:
                description: |-
                    ShmSizeSystemd is the size of systemd-specific tmpfs mounts
                    specifically /run, /run/lock, /var/log/journal and /tmp.
                    Optional
                format: int64
                type: integer
                x-go-name: ShmSizeSystemd
            startupHealthConfig:
                $ref: '#/definitions/StartupHealthCheck'
            stdin:
                description: |-
                    Stdin is whether the container will keep its STDIN open.
                    Optional.
                type: boolean
                x-go-name: Stdin
            stop_signal:
                $ref: '#/definitions/Signal'
            stop_timeout:
                description: |-
                    StopTimeout is a timeout between the container's stop signal being
                    sent and SIGKILL being sent.
                    If not provided, the default will be used.
                    If 0 is used, stop signal will not be sent, and SIGKILL will be sent
                    instead.
                    Optional.
                format: uint64
                type: integer
                x-go-name: StopTimeout
            storage_opts:
                additionalProperties:
                    type: string
                description: |-
                    StorageOpts is the container's storage options
                    Optional.
                type: object
                x-go-name: StorageOpts
            sysctl:
                additionalProperties:
                    type: string
                description: Sysctl sets kernel parameters for the container
                type: object
                x-go-name: Sysctl
            systemd:
                description: |-
                    Systemd is whether the container will be started in systemd mode.
                    Valid options are "true", "false", and "always".
                    "true" enables this mode only if the binary run in the container is
                    sbin/init or systemd. "always" unconditionally enables systemd mode.
                    "false" unconditionally disables systemd mode.
                    If enabled, mounts and stop signal will be modified.
                    If set to "always" or set to "true" and conditionally triggered,
                    conflicts with StopSignal.
                    If not specified, "false" will be assumed.
                    Optional.
                type: string
                x-go-name: Systemd
            terminal:
                description: |-
                    Terminal is whether the container will create a PTY.
                    Optional.
                type: boolean
                x-go-name: Terminal
            throttleReadBpsDevice:
                additionalProperties:
                    $ref: '#/definitions/LinuxThrottleDevice'
                description: IO read rate limit per cgroup per device, bytes per second
                type: object
                x-go-name: ThrottleReadBpsDevice
            throttleReadIOPSDevice:
                additionalProperties:
                    $ref: '#/definitions/LinuxThrottleDevice'
                description: IO read rate limit per cgroup per device, IO per second
                type: object
                x-go-name: ThrottleReadIOPSDevice
            throttleWriteBpsDevice:
                additionalProperties:
                    $ref: '#/definitions/LinuxThrottleDevice'
                description: IO write rate limit per cgroup per device, bytes per second
                type: object
                x-go-name: ThrottleWriteBpsDevice
            throttleWriteIOPSDevice:
                additionalProperties:
                    $ref: '#/definitions/LinuxThrottleDevice'
                description: IO write rate limit per cgroup per device, IO per second
                type: object
                x-go-name: ThrottleWriteIOPSDevice
            timeout:
                description: |-
                    Timeout is a maximum time in seconds the container will run before
                    main process is sent SIGKILL.
                    If 0 is used, signal will not be sent. Container can run indefinitely
                    if they do not stop after the default termination signal.
                    Optional.
                format: uint64
                type: integer
                x-go-name: Timeout
            timezone:
                description: |-
                    Timezone is the timezone inside the container.
                    Local means it has the same timezone as the host machine
                    Optional.
                type: string
                x-go-name: Timezone
            umask:
                description: Umask is the umask the init process of the container will be run with.
                type: string
                x-go-name: Umask
            unified:
                additionalProperties:
                    type: string
                description: |-
                    CgroupConf are key-value options passed into the container runtime
                    that are used to configure cgroup v2.
                    Optional.
                type: object
                x-go-name: CgroupConf
            unmask:
                description: |-
                    Unmask a path in the container. Some paths are masked by default,
                    preventing them from being accessed within the container; this undoes
                    that masking. If ALL is passed, all paths will be unmasked.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: Unmask
            unsetenv:
                description: |-
                    UnsetEnv unsets the specified default environment variables from the image or from built-in or containers.conf
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: UnsetEnv
            unsetenvall:
                description: |-
                    UnsetEnvAll unsetall default environment variables from the image or from built-in or containers.conf
                    UnsetEnvAll unsets all default environment variables from the image or from built-in
                    Optional.
                type: boolean
                x-go-name: UnsetEnvAll
            use_image_hostname:
                description: |-
                    UseImageHostname indicates that /etc/hostname should not be managed by
                    Podman, and instead sourced from the image.
                    Optional.
                type: boolean
                x-go-name: UseImageHostname
            use_image_hosts:
                description: |-
                    UseImageHosts indicates that /etc/hosts should not be managed by
                    Podman, and instead sourced from the image.
                    Conflicts with HostAdd.
                    Optional.
                type: boolean
                x-go-name: UseImageHosts
            use_image_resolve_conf:
                description: |-
                    UseImageResolvConf indicates that resolv.conf should not be managed
                    by Podman, but instead sourced from the image.
                    Conflicts with DNSServer, DNSSearch, DNSOption.
                    Optional.
                type: boolean
                x-go-name: UseImageResolvConf
            user:
                description: |-
                    User is the user the container will be run as.
                    Can be given as a UID or a username; if a username, it will be
                    resolved within the container, using the container's /etc/passwd.
                    If unset, the container will be run as root.
                    Optional.
                type: string
                x-go-name: User
            userns:
                $ref: '#/definitions/Namespace'
            utsns:
                $ref: '#/definitions/Namespace'
            volatile:
                description: |-
                    Volatile specifies whether the container storage can be optimized
                    at the cost of not syncing all the dirty files in memory.
                    Optional.
                type: boolean
                x-go-name: Volatile
            volumes:
                description: |-
                    Volumes are named volumes that will be added to the container.
                    These will supersede Image Volumes and VolumesFrom volumes where
                    there are conflicts.
                    Optional.
                items:
                    $ref: '#/definitions/NamedVolume'
                type: array
                x-go-name: Volumes
            volumes_from:
                description: |-
                    VolumesFrom is a set of containers whose volumes will be added to
                    this container. The name or ID of the container must be provided, and
                    may optionally be followed by a : and then one or more
                    comma-separated options. Valid options are 'ro', 'rw', and 'z'.
                    Options will be used for all volumes sourced from the container.
                    Optional.
                items:
                    type: string
                type: array
                x-go-name: VolumesFrom
            weightDevice:
                additionalProperties:
                    $ref: '#/definitions/LinuxWeightDevice'
                description: Weight per cgroup per device, can override BlkioWeight
                type: object
                x-go-name: WeightDevice
            work_dir:
                description: |-
                    WorkDir is the container's working directory.
                    If unset, the default, /, will be used.
                    Optional.
                type: string
                x-go-name: WorkDir
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    StartupHealthCheck:
        properties:
            Interval:
                $ref: '#/definitions/Duration'
            Retries:
                description: |-
                    Retries is the number of consecutive failures needed to consider a container as unhealthy.
                    Zero means inherit.
                format: int64
                type: integer
            StartInterval:
                $ref: '#/definitions/Duration'
            StartPeriod:
                $ref: '#/definitions/Duration'
            Successes:
                description: |-
                    Successes are the number of successes required to mark the startup HC
                    as passed.
                    If set to 0, a single success will mark the HC as passed.
                format: int64
                type: integer
            Test:
                description: |-
                    Test is the test to perform to check that the container is healthy.
                    An empty slice means to inherit the default.
                    The options are:
                    {} : inherit healthcheck
                    {"NONE"} : disable healthcheck
                    {"CMD", args...} : exec arguments directly
                    {"CMD-SHELL", command} : run command with system's default shell
                items:
                    type: string
                type: array
            Timeout:
                $ref: '#/definitions/Duration'
        title: StartupHealthCheck is the configuration of a startup healthcheck.
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    State:
        description: |-
            State stores container's running state
            it's part of ContainerJSONBase and returned by "inspect" command
        properties:
            Dead:
                type: boolean
            Error:
                type: string
            ExitCode:
                format: int64
                type: integer
            FinishedAt:
                type: string
            Health:
                $ref: '#/definitions/Health'
            OOMKilled:
                type: boolean
            Paused:
                type: boolean
            Pid:
                format: int64
                type: integer
            Restarting:
                type: boolean
            Running:
                type: boolean
            StartedAt:
                type: string
            Status:
                $ref: '#/definitions/ContainerState'
        type: object
        x-go-package: github.com/moby/moby/api/types/container
    Status:
        properties:
            IPAM:
                $ref: '#/definitions/IPAMStatus'
        title: Status provides runtime information about the network such as the number of allocated IPs.
        type: object
        x-go-package: github.com/moby/moby/api/types/network
    Storage:
        properties:
            RootFS:
                $ref: '#/definitions/RootFSStorage'
        title: Storage Information about the storage used by the container.
        type: object
        x-go-package: github.com/moby/moby/api/types/storage
    StoreInfo:
        description: |-
            StoreInfo describes the container storage and its
            attributes
        properties:
            containerStore:
                $ref: '#/definitions/ContainerStore'
            graphDriverName:
                type: string
                x-go-name: GraphDriverName
            graphOptions:
                additionalProperties: {}
                type: object
                x-go-name: GraphOptions
            graphRoot:
                type: string
                x-go-name: GraphRoot
            graphRootAllocated:
                description: GraphRootAllocated is how much space the graphroot has in bytes
                format: uint64
                type: integer
                x-go-name: GraphRootAllocated
            graphRootUsed:
                description: GraphRootUsed is how much of graphroot is used in bytes
                format: uint64
                type: integer
                x-go-name: GraphRootUsed
            graphStatus:
                additionalProperties:
                    type: string
                type: object
                x-go-name: GraphStatus
            imageCopyTmpDir:
                type: string
                x-go-name: ImageCopyTmpDir
            imageStore:
                $ref: '#/definitions/ImageStore'
            runRoot:
                type: string
                x-go-name: RunRoot
            transientStore:
                type: boolean
                x-go-name: TransientStore
            volumePath:
                type: string
                x-go-name: VolumePath
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    Subnet:
        properties:
            gateway:
                description: Gateway IP for this Network.
                format: string
                type: string
                x-go-name: Gateway
                x-go-type: net.IP
            lease_range:
                $ref: '#/definitions/LeaseRange'
            subnet:
                description: Subnet for this Network in CIDR form.
                format: string
                type: string
                x-go-name: Subnet
        type: object
        x-go-package: go.podman.io/common/libnetwork/types
    SubnetStatuses:
        additionalProperties:
            type: object
        type: object
        x-go-package: github.com/moby/moby/api/types/network
    Summary:
        properties:
            Containers:
                description: |-
                    Number of containers using this image. Includes both stopped and running
                    containers.

                    This size is not calculated by default, and depends on which API endpoint
                    is used. `-1` indicates that the value has not been set / calculated.
                format: int64
                type: integer
            Created:
                description: |-
                    Date and time at which the image was created as a Unix timestamp
                    (number of seconds since EPOCH).
                format: int64
                type: integer
            Descriptor:
                $ref: '#/definitions/Descriptor'
            Id:
                description: |-
                    ID is the content-addressable ID of an image.

                    This identifier is a content-addressable digest calculated from the
                    image's configuration (which includes the digests of layers used by
                    the image).

                    Note that this digest differs from the `RepoDigests` below, which
                    holds digests of image manifests that reference the image.
                type: string
                x-go-name: ID
            Labels:
                additionalProperties:
                    type: string
                description: User-defined key/value metadata.
                type: object
            Manifests:
                description: |-
                    Manifests is a list of image manifests available in this image.  It
                    provides a more detailed view of the platform-specific image manifests or
                    other image-attached data like build attestations.

                    WARNING: This is experimental and may change at any time without any backward
                    compatibility.
                items:
                    $ref: '#/definitions/ManifestSummary'
                type: array
            ParentId:
                description: |-
                    ID of the parent image.

                    Depending on how the image was created, this field may be empty and
                    is only set for images that were built/created locally. This field
                    is empty if the image was pulled from an image registry.
                type: string
                x-go-name: ParentID
            RepoDigests:
                description: |-
                    List of content-addressable digests of locally available image manifests
                    that the image is referenced from. Multiple manifests can refer to the
                    same image.

                    These digests are usually only available if the image was either pulled
                    from a registry, or if the image was pushed to a registry, which is when
                    the manifest is generated and its digest calculated.
                items:
                    type: string
                type: array
            RepoTags:
                description: |-
                    List of image names/tags in the local image cache that reference this
                    image.

                    Multiple image tags can refer to the same image, and this list may be
                    empty if no tags reference the image, in which case the image is
                    "untagged", in which case it can still be referenced by its ID.
                items:
                    type: string
                type: array
            SharedSize:
                description: |-
                    Total size of image layers that are shared between this image and other
                    images.

                    This size is not calculated by default. `-1` indicates that the value
                    has not been set / calculated.
                format: int64
                type: integer
            Size:
                description: Total size of the image including all layers it is composed of.
                format: int64
                type: integer
        required:
            - Containers
            - Created
            - Id
            - Labels
            - ParentId
            - RepoDigests
            - RepoTags
            - SharedSize
            - Size
        type: object
        x-go-package: github.com/moby/moby/api/types/image
    SystemCheckReport:
        description: ServiceOptions provides the input for starting an API and sidecar pprof services
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    SystemDfReport:
        description: ServiceOptions provides the input for starting an API and sidecar pprof services
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    SystemPruneReport:
        description: ServiceOptions provides the input for starting an API and sidecar pprof services
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    Task:
        description: Task carries the information about one backend task
        properties:
            EndpointID:
                description: endpoint ID
                type: string
            EndpointIP:
                description: endpoint IP
                type: string
                x-go-type: net/netip.Addr
            Info:
                additionalProperties:
                    type: string
                description: info
                type: object
            Name:
                description: name
                type: string
        type: object
        x-go-package: github.com/moby/moby/api/types/network
    ThrottleDevice:
        description: ThrottleDevice is a structure that holds device:rate_per_second pair
        properties:
            Path:
                type: string
            Rate:
                format: uint64
                type: integer
        type: object
        x-go-package: github.com/moby/moby/api/types/blkiodev
    TmpfsOptions:
        properties:
            Mode:
                $ref: '#/definitions/FileMode'
            Options:
                description: |-
                    Options to be passed to the tmpfs mount. An array of arrays. Flag
                    options should be provided as 1-length arrays. Other types should be
                    provided as 2-length arrays, where the first item is the key and the
                    second the value.
                items:
                    items:
                        type: string
                    type: array
                type: array
            SizeBytes:
                description: |-
                    Size sets the size of the tmpfs, in bytes.

                    This will be converted to an operating system specific value
                    depending on the host. For example, on linux, it will be converted to
                    use a 'k', 'm' or 'g' syntax. BSD, though not widely supported with
                    docker, uses a straight byte value.

                    Percentages are not supported.
                format: int64
                type: integer
        title: TmpfsOptions defines options specific to mounts of type "tmpfs".
        type: object
        x-go-package: github.com/moby/moby/api/types/mount
    Topology:
        description: |-
            This description is taken verbatim from the CSI Spec:

            A topological domain is a sub-division of a cluster, like "region",
            "zone", "rack", etc.
            A topological segment is a specific instance of a topological domain,
            like "zone3", "rack3", etc.
            For example {"com.company/zone": "Z1", "com.company/rack": "R3"}
            Valid keys have two segments: an OPTIONAL prefix and name, separated
        example: '"com.company.example/zone".'
        properties:
            Segments:
                additionalProperties:
                    type: string
                type: object
        title: Topology is a map of topological domains to topological segments.
        type: object
        x-go-package: github.com/moby/moby/api/types/volume
    TopologyRequirement:
        description: |-
            TopologyRequirement expresses the user's requirements for a volume's
            accessible topology.
        properties:
            Preferred:
                description: |-
                    Preferred is a list of Topologies that the volume should attempt to be
                    provisioned in.

                    Taken from the CSI spec:

                    Specifies the list of topologies the CO would prefer the volume to
                    be provisioned in.

                    This field is OPTIONAL. If TopologyRequirement is specified either
                    requisite or preferred or both MUST be specified.

                    An SP MUST attempt to make the provisioned volume available using
                    the preferred topologies in order from first to last.

                    If requisite is specified, all topologies in preferred list MUST
                    also be present in the list of requisite topologies.

                    If the SP is unable to make the provisioned volume available
                    from any of the preferred topologies, the SP MAY choose a topology
                    from the list of requisite topologies.
                    If the list of requisite topologies is not specified, then the SP
                    MAY choose from the list of all possible topologies.
                    If the list of requisite topologies is specified and the SP is
                    unable to make the provisioned volume available from any of the
                    requisite topologies it MUST fail the CreateVolume call.

                    Example 1:
                    Given a volume should be accessible from a single zone, and
                    requisite =
                    {"region": "R1", "zone": "Z2"},
                    {"region": "R1", "zone": "Z3"}
                    preferred =
                    {"region": "R1", "zone": "Z3"}
                    then the SP SHOULD first attempt to make the provisioned volume
                    available from "zone" "Z3" in the "region" "R1" and fall back to
                    "zone" "Z2" in the "region" "R1" if that is not possible.

                    Example 2:
                    Given a volume should be accessible from a single zone, and
                    requisite =
                    {"region": "R1", "zone": "Z2"},
                    {"region": "R1", "zone": "Z3"},
                    {"region": "R1", "zone": "Z4"},
                    {"region": "R1", "zone": "Z5"}
                    preferred =
                    {"region": "R1", "zone": "Z4"},
                    {"region": "R1", "zone": "Z2"}
                    then the SP SHOULD first attempt to make the provisioned volume
                    accessible from "zone" "Z4" in the "region" "R1" and fall back to
                    "zone" "Z2" in the "region" "R1" if that is not possible. If that
                    is not possible, the SP may choose between either the "zone"
                    "Z3" or "Z5" in the "region" "R1".

                    Example 3:
                    Given a volume should be accessible from TWO zones (because an
                    opaque parameter in CreateVolumeRequest, for example, specifies
                    the volume is accessible from two zones, aka synchronously
                    replicated), and
                    requisite =
                    {"region": "R1", "zone": "Z2"},
                    {"region": "R1", "zone": "Z3"},
                    {"region": "R1", "zone": "Z4"},
                    {"region": "R1", "zone": "Z5"}
                    preferred =
                    {"region": "R1", "zone": "Z5"},
                    {"region": "R1", "zone": "Z3"}
                    then the SP SHOULD first attempt to make the provisioned volume
                    accessible from the combination of the two "zones" "Z5" and "Z3" in
                    the "region" "R1". If that's not possible, it should fall back to
                    a combination of "Z5" and other possibilities from the list of
                    requisite. If that's not possible, it should fall back  to a
                    combination of "Z3" and other possibilities from the list of
                    requisite. If that's not possible, it should fall back  to a
                    combination of other possibilities from the list of requisite.
                items:
                    $ref: '#/definitions/Topology'
                type: array
            Requisite:
                description: |-
                    Requisite specifies a list of Topologies, at least one of which the
                    volume must be accessible from.

                    Taken verbatim from the CSI Spec:

                    Specifies the list of topologies the provisioned volume MUST be
                    accessible from.
                    This field is OPTIONAL. If TopologyRequirement is specified either
                    requisite or preferred or both MUST be specified.

                    If requisite is specified, the provisioned volume MUST be
                    accessible from at least one of the requisite topologies.

                    Given
                    x = number of topologies provisioned volume is accessible from
                    n = number of requisite topologies
                    The CO MUST ensure n >= 1. The SP MUST ensure x >= 1
                    If x==n, then the SP MUST make the provisioned volume available to
                    all topologies from the list of requisite topologies. If it is
                    unable to do so, the SP MUST fail the CreateVolume call.
                    For example, if a volume should be accessible from a single zone,
                    and requisite =
                    {"region": "R1", "zone": "Z2"}
                    then the provisioned volume MUST be accessible from the "region"
                    "R1" and the "zone" "Z2".
                    Similarly, if a volume should be accessible from two zones, and
                    requisite =
                    {"region": "R1", "zone": "Z2"},
                    {"region": "R1", "zone": "Z3"}
                    then the provisioned volume MUST be accessible from the "region"
                    "R1" and both "zone" "Z2" and "zone" "Z3".

                    If x<n, then the SP SHALL choose x unique topologies from the list
                    of requisite topologies. If it is unable to do so, the SP MUST fail
                    the CreateVolume call.
                    For example, if a volume should be accessible from a single zone,
                    and requisite =
                    {"region": "R1", "zone": "Z2"},
                    {"region": "R1", "zone": "Z3"}
                    then the SP may choose to make the provisioned volume available in
                    either the "zone" "Z2" or the "zone" "Z3" in the "region" "R1".
                    Similarly, if a volume should be accessible from two zones, and
                    requisite =
                    {"region": "R1", "zone": "Z2"},
                    {"region": "R1", "zone": "Z3"},
                    {"region": "R1", "zone": "Z4"}
                    then the provisioned volume MUST be accessible from any combination
                    of two unique topologies: e.g. "R1/Z2" and "R1/Z3", or "R1/Z2" and
                    "R1/Z4", or "R1/Z3" and "R1/Z4".

                    If x>n, then the SP MUST make the provisioned volume available from
                    all topologies from the list of requisite topologies and MAY choose
                    the remaining x-n unique topologies from the list of all possible
                    topologies. If it is unable to do so, the SP MUST fail the
                    CreateVolume call.
                    For example, if a volume should be accessible from two zones, and
                    requisite =
                    {"region": "R1", "zone": "Z2"}
                    then the provisioned volume MUST be accessible from the "region"
                    "R1" and the "zone" "Z2" and the SP may select the second zone
                    independently, e.g. "R1/Z4".
                items:
                    $ref: '#/definitions/Topology'
                type: array
        type: object
        x-go-package: github.com/moby/moby/api/types/volume
    Type:
        title: Type represents the type of a mount.
        type: string
        x-go-package: github.com/moby/moby/api/types/mount
    TypeBlock:
        description: Intentionally empty.
        title: TypeBlock defines options for using a volume as a block-type volume.
        type: object
        x-go-package: github.com/moby/moby/api/types/volume
    TypeMount:
        description: |-
            TypeMount contains options for using a volume as a Mount-type
            volume.
        properties:
            FsType:
                description: FsType specifies the filesystem type for the mount volume. Optional.
                type: string
            MountFlags:
                description: MountFlags defines flags to pass when mounting the volume. Optional.
                items:
                    type: string
                type: array
        type: object
        x-go-package: github.com/moby/moby/api/types/volume
    UTSMode:
        title: UTSMode represents the UTS namespace of the container.
        type: string
        x-go-package: github.com/moby/moby/api/types/container
    Ulimit:
        description: Users are recommended to use this alias instead of using [units.Ulimit] directly.
        title: |-
            Ulimit is an alias for [units.Ulimit], which may be moving to a different
            location or become a local type. This alias is to help transitioning.
        type: object
        x-go-package: github.com/moby/moby/api/types/container
    UpdateConfig:
        description: Those attributes can be updated at runtime.
        properties:
            BlkioDeviceReadBps:
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            BlkioDeviceReadIOps:
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            BlkioDeviceWriteBps:
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            BlkioDeviceWriteIOps:
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            BlkioWeight:
                format: uint16
                type: integer
            BlkioWeightDevice:
                items:
                    $ref: '#/definitions/WeightDevice'
                type: array
            CgroupParent:
                description: Applicable to UNIX platforms
                type: string
            CpuCount:
                description: Applicable to Windows
                format: int64
                type: integer
                x-go-name: CPUCount
            CpuPercent:
                format: int64
                type: integer
                x-go-name: CPUPercent
            CpuPeriod:
                format: int64
                type: integer
                x-go-name: CPUPeriod
            CpuQuota:
                format: int64
                type: integer
                x-go-name: CPUQuota
            CpuRealtimePeriod:
                format: int64
                type: integer
                x-go-name: CPURealtimePeriod
            CpuRealtimeRuntime:
                format: int64
                type: integer
                x-go-name: CPURealtimeRuntime
            CpuShares:
                description: Applicable to all platforms
                format: int64
                type: integer
                x-go-name: CPUShares
            CpusetCpus:
                type: string
            CpusetMems:
                type: string
            DeviceCgroupRules:
                items:
                    type: string
                type: array
            DeviceRequests:
                items:
                    $ref: '#/definitions/DeviceRequest'
                type: array
            Devices:
                items:
                    $ref: '#/definitions/DeviceMapping'
                type: array
            IOMaximumBandwidth:
                format: uint64
                type: integer
            IOMaximumIOps:
                format: uint64
                type: integer
            Memory:
                format: int64
                type: integer
            MemoryReservation:
                format: int64
                type: integer
            MemorySwap:
                format: int64
                type: integer
            MemorySwappiness:
                format: int64
                type: integer
            NanoCpus:
                format: int64
                type: integer
                x-go-name: NanoCPUs
            OomKillDisable:
                type: boolean
            PidsLimit:
                format: int64
                type: integer
            RestartPolicy:
                $ref: '#/definitions/RestartPolicy'
            Ulimits:
                items:
                    $ref: '#/definitions/Ulimit'
                type: array
        title: UpdateConfig holds the mutable attributes of a Container.
        type: object
        x-go-package: github.com/moby/moby/api/types/container
    UpdateContainerDevicesLimits:
        properties:
            BlkIOWeightDevice:
                description: |-
                    Block IO weight (relative device weight) in the form:
                    ```[{"Path": "device_path", "Weight": weight}]```
                items:
                    $ref: '#/definitions/WeightDevice'
                type: array
            DeviceReadBPs:
                description: |-
                    Limit read rate (bytes per second) from a device, in the form:
                    ```[{"Path": "device_path", "Rate": rate}]```
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            DeviceReadIOPs:
                description: |-
                    Limit read rate (IO per second) from a device, in the form:
                    ```[{"Path": "device_path", "Rate": rate}]```
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            DeviceWriteBPs:
                description: |-
                    Limit write rate (bytes per second) to a device, in the form:
                    ```[{"Path": "device_path", "Rate": rate}]```
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            DeviceWriteIOPs:
                description: |-
                    Limit write rate (IO per second) to a device, in the form:
                    ```[{"Path": "device_path", "Rate": rate}]```
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    UpdateEntities:
        description: UpdateEntities used to wrap the oci resource spec in a swagger model
        properties:
            BlkIOWeightDevice:
                description: |-
                    Block IO weight (relative device weight) in the form:
                    ```[{"Path": "device_path", "Weight": weight}]```
                items:
                    $ref: '#/definitions/WeightDevice'
                type: array
            DeviceReadBPs:
                description: |-
                    Limit read rate (bytes per second) from a device, in the form:
                    ```[{"Path": "device_path", "Rate": rate}]```
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            DeviceReadIOPs:
                description: |-
                    Limit read rate (IO per second) from a device, in the form:
                    ```[{"Path": "device_path", "Rate": rate}]```
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            DeviceWriteBPs:
                description: |-
                    Limit write rate (bytes per second) to a device, in the form:
                    ```[{"Path": "device_path", "Rate": rate}]```
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            DeviceWriteIOPs:
                description: |-
                    Limit write rate (IO per second) to a device, in the form:
                    ```[{"Path": "device_path", "Rate": rate}]```
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            Env:
                items:
                    type: string
                type: array
            UnsetEnv:
                items:
                    type: string
                type: array
            blockIO:
                $ref: '#/definitions/LinuxBlockIO'
            cpu:
                $ref: '#/definitions/LinuxCPU'
            devices:
                description: Devices configures the device allowlist.
                items:
                    $ref: '#/definitions/LinuxDeviceCgroup'
                type: array
                x-go-name: Devices
            health_cmd:
                description: HealthCmd set a healthcheck command for the container. ('none' disables the existing healthcheck)
                type: string
                x-go-name: HealthCmd
            health_interval:
                description: |-
                    HealthInterval set an interval for the healthcheck.
                    (a value of disable results in no automatic timer setup) Changing this setting resets timer.
                type: string
                x-go-name: HealthInterval
            health_log_destination:
                description: |-
                    HealthLogDestination set the destination of the HealthCheck log.
                    Directory path, local or events_logger (local use container state file)
                    Warning: Changing this setting may cause the loss of previous logs!
                type: string
                x-go-name: HealthLogDestination
            health_max_log_count:
                description: |-
                    HealthMaxLogCount set maximum number of attempts in the HealthCheck log file.
                    ('0' value means an infinite number of attempts in the log file)
                format: uint64
                type: integer
                x-go-name: HealthMaxLogCount
            health_max_log_size:
                description: |-
                    HealthMaxLogSize set maximum length in characters of stored HealthCheck log.
                    ('0' value means an infinite log length)
                format: uint64
                type: integer
                x-go-name: HealthMaxLogSize
            health_on_failure:
                description: HealthOnFailure set the action to take once the container turns unhealthy.
                type: string
                x-go-name: HealthOnFailure
            health_retries:
                description: HealthRetries set the number of retries allowed before a healthcheck is considered to be unhealthy.
                format: uint64
                type: integer
                x-go-name: HealthRetries
            health_start_period:
                description: HealthStartPeriod set the initialization time needed for a container to bootstrap.
                type: string
                x-go-name: HealthStartPeriod
            health_startup_cmd:
                description: HealthStartupCmd set a startup healthcheck command for the container.
                type: string
                x-go-name: HealthStartupCmd
            health_startup_interval:
                description: |-
                    HealthStartupInterval set an interval for the startup healthcheck.
                    Changing this setting resets the timer, depending on the state of the container.
                type: string
                x-go-name: HealthStartupInterval
            health_startup_retries:
                description: HealthStartupRetries set the maximum number of retries before the startup healthcheck will restart the container.
                format: uint64
                type: integer
                x-go-name: HealthStartupRetries
            health_startup_success:
                description: |-
                    HealthStartupSuccess set the number of consecutive successes before the startup healthcheck is marked as successful
                    and the normal healthcheck begins (0 indicates any success will start the regular healthcheck)
                format: uint64
                type: integer
                x-go-name: HealthStartupSuccess
            health_startup_timeout:
                description: HealthStartupTimeout set the maximum amount of time that the startup healthcheck may take before it is considered failed.
                type: string
                x-go-name: HealthStartupTimeout
            health_timeout:
                description: HealthTimeout set the maximum time allowed to complete the healthcheck before an interval is considered failed.
                type: string
                x-go-name: HealthTimeout
            hugepageLimits:
                description: Hugetlb limits (in bytes). Default to reservation limits if supported.
                items:
                    $ref: '#/definitions/LinuxHugepageLimit'
                type: array
                x-go-name: HugepageLimits
            memory:
                $ref: '#/definitions/LinuxMemory'
            network:
                $ref: '#/definitions/LinuxNetwork'
            no_healthcheck:
                description: Disable healthchecks on container.
                type: boolean
                x-go-name: NoHealthCheck
            pids:
                $ref: '#/definitions/LinuxPids'
            r_limits:
                items:
                    $ref: '#/definitions/POSIXRlimit'
                type: array
                x-go-name: Rlimits
            rdma:
                additionalProperties:
                    $ref: '#/definitions/LinuxRdma'
                description: |-
                    Rdma resource restriction configuration.
                    Limits are a set of key value pairs that define RDMA resource limits,
                    where the key is device name and value is resource limits.
                type: object
                x-go-name: Rdma
            unified:
                additionalProperties:
                    type: string
                description: Unified resources.
                type: object
                x-go-name: Unified
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/api/handlers
    UpdateHealthCheckConfig:
        properties:
            health_cmd:
                description: HealthCmd set a healthcheck command for the container. ('none' disables the existing healthcheck)
                type: string
                x-go-name: HealthCmd
            health_interval:
                description: |-
                    HealthInterval set an interval for the healthcheck.
                    (a value of disable results in no automatic timer setup) Changing this setting resets timer.
                type: string
                x-go-name: HealthInterval
            health_log_destination:
                description: |-
                    HealthLogDestination set the destination of the HealthCheck log.
                    Directory path, local or events_logger (local use container state file)
                    Warning: Changing this setting may cause the loss of previous logs!
                type: string
                x-go-name: HealthLogDestination
            health_max_log_count:
                description: |-
                    HealthMaxLogCount set maximum number of attempts in the HealthCheck log file.
                    ('0' value means an infinite number of attempts in the log file)
                format: uint64
                type: integer
                x-go-name: HealthMaxLogCount
            health_max_log_size:
                description: |-
                    HealthMaxLogSize set maximum length in characters of stored HealthCheck log.
                    ('0' value means an infinite log length)
                format: uint64
                type: integer
                x-go-name: HealthMaxLogSize
            health_on_failure:
                description: HealthOnFailure set the action to take once the container turns unhealthy.
                type: string
                x-go-name: HealthOnFailure
            health_retries:
                description: HealthRetries set the number of retries allowed before a healthcheck is considered to be unhealthy.
                format: uint64
                type: integer
                x-go-name: HealthRetries
            health_start_period:
                description: HealthStartPeriod set the initialization time needed for a container to bootstrap.
                type: string
                x-go-name: HealthStartPeriod
            health_startup_cmd:
                description: HealthStartupCmd set a startup healthcheck command for the container.
                type: string
                x-go-name: HealthStartupCmd
            health_startup_interval:
                description: |-
                    HealthStartupInterval set an interval for the startup healthcheck.
                    Changing this setting resets the timer, depending on the state of the container.
                type: string
                x-go-name: HealthStartupInterval
            health_startup_retries:
                description: HealthStartupRetries set the maximum number of retries before the startup healthcheck will restart the container.
                format: uint64
                type: integer
                x-go-name: HealthStartupRetries
            health_startup_success:
                description: |-
                    HealthStartupSuccess set the number of consecutive successes before the startup healthcheck is marked as successful
                    and the normal healthcheck begins (0 indicates any success will start the regular healthcheck)
                format: uint64
                type: integer
                x-go-name: HealthStartupSuccess
            health_startup_timeout:
                description: HealthStartupTimeout set the maximum amount of time that the startup healthcheck may take before it is considered failed.
                type: string
                x-go-name: HealthStartupTimeout
            health_timeout:
                description: HealthTimeout set the maximum time allowed to complete the healthcheck before an interval is considered failed.
                type: string
                x-go-name: HealthTimeout
            no_healthcheck:
                description: Disable healthchecks on container.
                type: boolean
                x-go-name: NoHealthCheck
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    UsageData:
        description: |-
            UsageData Usage details about the volume. This information is used by the
            `GET /system/df` endpoint, and omitted in other endpoints.
        properties:
            RefCount:
                description: |-
                    The number of containers referencing this volume. This field
                    is set to `-1` if the reference-count is not available.
                format: int64
                type: integer
            Size:
                description: |-
                    Amount of disk space used by the volume (in bytes). This information
                    is only available for volumes created with the `"local"` volume
                    driver. For volumes created with other volume drivers, this field
                    is set to `-1` ("not available")
                format: int64
                type: integer
        required:
            - RefCount
            - Size
        type: object
        x-go-package: github.com/moby/moby/api/types/volume
    UsernsMode:
        title: UsernsMode represents userns mode in the container.
        type: string
        x-go-package: github.com/moby/moby/api/types/container
    Version:
        description: Version is an output struct for API
        properties:
            APIVersion:
                type: string
            BuildOrigin:
                type: string
            Built:
                format: int64
                type: integer
            BuiltTime:
                type: string
            GitCommit:
                type: string
            GoVersion:
                type: string
            Os:
                type: string
            OsArch:
                type: string
            Version:
                type: string
        type: object
        x-go-package: go.podman.io/podman/v6/libpod/define
    Volume:
        description: Volume volume
        properties:
            ClusterVolume:
                $ref: '#/definitions/ClusterVolume'
            CreatedAt:
                description: Date/Time the volume was created.
                example: "2016-06-07T20:31:11.853781916Z"
                type: string
            Driver:
                description: Name of the volume driver used by the volume.
                example: custom
                type: string
            Labels:
                additionalProperties:
                    type: string
                description: User-defined key/value metadata.
                example:
                    com.example.some-label: some-value
                    com.example.some-other-label: some-other-value
                type: object
            Mountpoint:
                description: Mount path of the volume on the host.
                example: /var/lib/docker/volumes/tardis
                type: string
            Name:
                description: Name of the volume.
                example: tardis
                type: string
            Options:
                additionalProperties:
                    type: string
                description: The driver specific options used when creating the volume.
                example:
                    device: tmpfs
                    o: size=100m,uid=1000
                    type: tmpfs
                type: object
            Scope:
                description: |-
                    The level at which the volume exists. Either `global` for cluster-wide,
                    or `local` for machine level.
                enum:
                    - local
                    - global
                example: local
                type: string
            Status:
                additionalProperties: {}
                description: |-
                    Low-level details about the volume, provided by the volume driver.
                    Details are returned as a map with key/value pairs:
                    `{"key":"value","key2":"value2"}`.

                    The `Status` field is optional, and is omitted if the volume driver
                    does not support this feature.
                example:
                    hello: world
                type: object
            UsageData:
                $ref: '#/definitions/UsageData'
        required:
            - Driver
            - Labels
            - Mountpoint
            - Name
            - Options
            - Scope
        type: object
        x-go-package: github.com/moby/moby/api/types/volume
    VolumeConfigResponse:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities
    VolumeCreateOptions:
        properties:
            Driver:
                description: Volume driver to use
                type: string
            GID:
                description: GID that the volume will be created as
                format: int64
                type: integer
            IgnoreIfExists:
                description: Ignore existing volumes
                type: boolean
            Label:
                additionalProperties:
                    type: string
                description: User-defined key/value metadata. Provided for compatibility
                type: object
            Labels:
                additionalProperties:
                    type: string
                description: User-defined key/value metadata. Preferred field, will override Label
                type: object
            Name:
                description: New volume's name. Can be left blank
                type: string
            Options:
                additionalProperties:
                    type: string
                description: Mapping of driver options and values.
                type: object
            UID:
                description: UID that the volume will be created as
                format: int64
                type: integer
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/domain/entities/types
    VolumeOptions:
        properties:
            DriverConfig:
                $ref: '#/definitions/Driver'
            Labels:
                additionalProperties:
                    type: string
                type: object
            NoCopy:
                type: boolean
            Subpath:
                type: string
        title: VolumeOptions represents the options for a mount of type volume.
        type: object
        x-go-package: github.com/moby/moby/api/types/mount
    WeightDevice:
        description: WeightDevice is a structure that holds device:weight pair
        properties:
            Path:
                type: string
            Weight:
                format: uint16
                type: integer
        type: object
        x-go-package: github.com/moby/moby/api/types/blkiodev
    cacheLibImage:
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/specgen
    containerUpdateRequest:
        description: Container update
        properties:
            BlkioDeviceReadBps:
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            BlkioDeviceReadIOps:
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            BlkioDeviceWriteBps:
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            BlkioDeviceWriteIOps:
                items:
                    $ref: '#/definitions/ThrottleDevice'
                type: array
            BlkioWeight:
                format: uint16
                type: integer
            BlkioWeightDevice:
                items:
                    $ref: '#/definitions/WeightDevice'
                type: array
            CgroupParent:
                description: Applicable to UNIX platforms
                type: string
            CpuCount:
                description: Applicable to Windows
                format: int64
                type: integer
                x-go-name: CPUCount
            CpuPercent:
                format: int64
                type: integer
                x-go-name: CPUPercent
            CpuPeriod:
                format: int64
                type: integer
                x-go-name: CPUPeriod
            CpuQuota:
                format: int64
                type: integer
                x-go-name: CPUQuota
            CpuRealtimePeriod:
                format: int64
                type: integer
                x-go-name: CPURealtimePeriod
            CpuRealtimeRuntime:
                format: int64
                type: integer
                x-go-name: CPURealtimeRuntime
            CpuShares:
                description: Applicable to all platforms
                format: int64
                type: integer
                x-go-name: CPUShares
            CpusetCpus:
                type: string
            CpusetMems:
                type: string
            DeviceCgroupRules:
                items:
                    type: string
                type: array
            DeviceRequests:
                items:
                    $ref: '#/definitions/DeviceRequest'
                type: array
            Devices:
                items:
                    $ref: '#/definitions/DeviceMapping'
                type: array
            IOMaximumBandwidth:
                format: uint64
                type: integer
            IOMaximumIOps:
                format: uint64
                type: integer
            Memory:
                format: int64
                type: integer
            MemoryReservation:
                format: int64
                type: integer
            MemorySwap:
                format: int64
                type: integer
            MemorySwappiness:
                format: int64
                type: integer
            NanoCpus:
                format: int64
                type: integer
                x-go-name: NanoCPUs
            OomKillDisable:
                type: boolean
            PidsLimit:
                format: int64
                type: integer
            RestartPolicy:
                $ref: '#/definitions/RestartPolicy'
            Ulimits:
                items:
                    $ref: '#/definitions/Ulimit'
                type: array
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/api/handlers/swagger
    networkConnectRequest:
        $ref: '#/definitions/ConnectRequest'
        description: Network connect
    networkConnectRequestLibpod:
        $ref: '#/definitions/NetworkConnectOptions'
        description: Network connect
    networkCreate:
        $ref: '#/definitions/CreateRequest'
        description: Network create
    networkCreateLibpod:
        description: Network create
        properties:
            created:
                description: Created contains the timestamp when this network was created.
                format: date-time
                type: string
                x-go-name: Created
            dns_enabled:
                description: |-
                    DNSEnabled is whether name resolution is active for container on
                    this Network. Only supported with the bridge driver.
                type: boolean
                x-go-name: DNSEnabled
            driver:
                description: Driver for this Network, e.g. bridge, macvlan...
                type: string
                x-go-name: Driver
            id:
                description: ID of the Network.
                type: string
                x-go-name: ID
            internal:
                description: |-
                    Internal is whether the Network should not have external routes
                    to public or other Networks.
                type: boolean
                x-go-name: Internal
            ipam_options:
                additionalProperties:
                    type: string
                description: IPAMOptions contains options used for the ip assignment.
                type: object
                x-go-name: IPAMOptions
            ipv6_enabled:
                description: IPv6Enabled if set to true an ipv6 subnet should be created for this net.
                type: boolean
                x-go-name: IPv6Enabled
            labels:
                additionalProperties:
                    type: string
                description: |-
                    Labels is a set of key-value labels that have been applied to the
                    Network.
                type: object
                x-go-name: Labels
            name:
                description: Name of the Network.
                type: string
                x-go-name: Name
            network_dns_servers:
                description: |-
                    List of custom DNS server for podman's DNS resolver at network level,
                    all the containers attached to this network will consider resolvers
                    configured at network level.
                items:
                    type: string
                type: array
                x-go-name: NetworkDNSServers
            network_interface:
                description: NetworkInterface is the network interface name on the host.
                type: string
                x-go-name: NetworkInterface
            options:
                additionalProperties:
                    type: string
                description: |-
                    Options is a set of key-value options that have been applied to
                    the Network.
                type: object
                x-go-name: Options
            routes:
                description: Routes to use for this network.
                items:
                    $ref: '#/definitions/Route'
                type: array
                x-go-name: Routes
            subnets:
                description: Subnets to use for this network.
                items:
                    $ref: '#/definitions/Subnet'
                type: array
                x-go-name: Subnets
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/api/handlers/swagger
    networkDisconnectRequest:
        $ref: '#/definitions/DisconnectRequest'
        description: Network disconnect
    networkUpdateRequestLibpod:
        $ref: '#/definitions/NetworkUpdateOptions'
        description: Network update
    volumeCreate:
        description: Details for creating a volume
        properties:
            Driver:
                description: Name of the volume driver to use.
                type: string
            DriverOpts:
                additionalProperties:
                    type: string
                description: |-
                    A mapping of driver options and values. These options are
                    passed directly to the driver and are driver specific.
                type: object
            Labels:
                additionalProperties:
                    type: string
                description: User-defined key/value metadata.
                type: object
            Name:
                description: The new volume's name. If not specified, Docker generates a name.
                type: string
        required:
            - Driver
            - DriverOpts
            - Labels
            - Name
        type: object
        x-go-package: go.podman.io/podman/v6/pkg/api/handlers/swagger
host: podman.io
info:
    contact:
        email: podman@lists.podman.io
        name: Podman
        url: https://podman.io/community/
    description: |-
        This documentation describes the Podman v2.x+ RESTful API. It consists of a Docker-compatible
        API and a Libpod API providing support for Podman’s unique features such as pods.

        To start the service and keep it running for 5,000 seconds (-t 0 runs forever):

        podman system service -t 5000 &

        You can then use cURL on the socket using requests documented below.

        NOTE: if you install the package podman-docker, it will create a symbolic
        link for /run/docker.sock to /run/podman/podman.sock

        NOTE: Some fields in the API response JSON are encoded as omitempty, which means that
        if said field has a zero value, they will not be encoded in the API response. This
        is a feature to help reduce the size of the JSON responses returned via the API.

        NOTE: Due to the limitations of [go-swagger](https://github.com/go-swagger/go-swagger),
        some field values that have a complex type show up as null in the docs as well as in the
        API responses. This is because the zero value for the field type is null. The field
        description in the docs will state what type the field is expected to be for such cases.

        See podman-system-service(1) for more information.

        Quick Examples:

        'podman info'

        curl --unix-socket /run/podman/podman.sock http://d/v6.0.0/libpod/info

        'podman pull quay.io/containers/podman'

        curl -XPOST --unix-socket /run/podman/podman.sock -v 'http://d/v6.0.0/images/create?fromImage=quay.io%2Fcontainers%2Fpodman'

        'podman list images'

        curl --unix-socket /run/podman/podman.sock -v 'http://d/v6.0.0/libpod/images/json' | jq
    license:
        name: Apache-2.0
        url: https://opensource.org/licenses/Apache-2.0
    termsOfService: https://github.com/containers/podman/blob/913caaa9b1de2b63692c9bae15120208194c9eb3/LICENSE
    title: supports a RESTful API for the Libpod library
    version: 5.0.0
    x-logo:
        - url: https://raw.githubusercontent.com/containers/libpod/main/logo/podman-logo.png
        - altText: Podman logo
paths:
    /auth:
        post:
            operationId: SystemAuth
            parameters:
                - description: Authentication to check
                  in: body
                  name: authConfig
                  schema:
                    $ref: '#/definitions/AuthConfig'
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/systemAuthResponse'
                "500":
                    $ref: '#/responses/internalError'
            summary: Check auth configuration
            tags:
                - system (compat)
    /build:
        post:
            description: Build an image from the given Dockerfile(s)
            operationId: ImageBuild
            parameters:
                - default: application/x-tar
                  enum:
                    - application/x-tar
                  in: header
                  name: Content-Type
                  type: string
                - in: header
                  name: X-Registry-Config
                  type: string
                - default: Dockerfile
                  description: |
                    Path within the build context to the `Dockerfile`.
                    This is ignored if remote is specified and points to an external `Dockerfile`.
                  in: query
                  name: dockerfile
                  type: string
                - default: latest
                  description: A name and optional tag to apply to the image in the `name:tag` format. If you omit the tag, the default latest value is assumed. You can provide several t parameters.
                  in: query
                  name: t
                  type: string
                - description: |
                    TBD Extra hosts to add to /etc/hosts
                    (As of version 1.xx)
                  in: query
                  name: extrahosts
                  type: string
                - description: |
                    Not to create /etc/hosts when building the image
                  in: query
                  name: nohosts
                  type: boolean
                - description: |
                    A Git repository URI or HTTP/HTTPS context URI.
                    If the URI points to a single text file, the file’s contents are placed
                    into a file called Dockerfile and the image is built from that file. If
                    the URI points to a tarball, the file is downloaded by the daemon and the
                    contents therein used as the context for the build. If the URI points to a
                    tarball and the dockerfile parameter is also specified, there must be a file
                    with the corresponding path inside the tarball.
                    (As of version 1.xx)
                  in: query
                  name: remote
                  type: string
                - default: 3
                  description: |
                    Number of times to retry in case of failure when performing push/pull.
                  in: query
                  name: retry
                  type: integer
                - default: 2s
                  description: |
                    Delay between retries in case of push/pull failures.
                  in: query
                  name: retry-delay
                  type: string
                - default: false
                  description: |
                    Suppress verbose build output
                  in: query
                  name: q
                  type: boolean
                - default: false
                  description: |
                    Do not use the cache when building the image
                    (As of version 1.xx)
                  in: query
                  name: nocache
                  type: boolean
                - description: |
                    JSON array of images used to build cache resolution
                    (As of version 1.xx)
                  in: query
                  name: cachefrom
                  type: string
                - default: false
                  description: |
                    Attempt to pull the image even if an older image exists locally
                    (As of version 1.xx)
                  in: query
                  name: pull
                  type: boolean
                - default: true
                  description: |
                    Remove intermediate containers after a successful build
                    (As of version 1.xx)
                  in: query
                  name: rm
                  type: boolean
                - default: false
                  description: |
                    Always remove intermediate containers, even upon failure
                    (As of version 1.xx)
                  in: query
                  name: forcerm
                  type: boolean
                - description: |
                    Memory is the upper limit (in bytes) on how much memory running containers can use
                    (As of version 1.xx)
                  in: query
                  name: memory
                  type: integer
                - description: |
                    MemorySwap limits the amount of memory and swap together
                    (As of version 1.xx)
                  in: query
                  name: memswap
                  type: integer
                - description: |
                    CPUShares (relative weight
                    (As of version 1.xx)
                  in: query
                  name: cpushares
                  type: integer
                - description: |
                    CPUSetCPUs in which to allow execution (0-3, 0,1)
                    (As of version 1.xx)
                  in: query
                  name: cpusetcpus
                  type: string
                - description: |
                    CPUPeriod limits the CPU CFS (Completely Fair Scheduler) period
                    (As of version 1.xx)
                  in: query
                  name: cpuperiod
                  type: integer
                - description: |
                    CPUQuota limits the CPU CFS (Completely Fair Scheduler) quota
                    (As of version 1.xx)
                  in: query
                  name: cpuquota
                  type: integer
                - description: |
                    JSON map of string pairs denoting build-time variables.
                    For example, the build argument `Foo` with the value of `bar` would be encoded in JSON as `["Foo":"bar"]`.

                    For example, buildargs={"Foo":"bar"}.

                    Note(s):
                    * This should not be used to pass secrets.
                    * The value of buildargs should be URI component encoded before being passed to the API.

                    (As of version 1.xx)
                  in: query
                  name: buildargs
                  type: string
                - default: 67108864
                  description: |
                    ShmSize is the "size" value to use when mounting an shmfs on the container's /dev/shm directory.
                    Default is 64MB
                    (As of version 1.xx)
                  in: query
                  name: shmsize
                  type: integer
                - default: false
                  description: |
                    Silently ignored.
                    Squash the resulting images layers into a single layer
                    (As of version 1.xx)
                  in: query
                  name: squash
                  type: boolean
                - default: false
                  description: |
                    Preserve intermediate stage images instead of removing them after the build completes.
                    By default, they are removed to save space.
                    However, they can be useful for debugging multi-stage builds or reusing stages in subsequent builds.
                  in: query
                  name: save-stages
                  type: boolean
                - default: false
                  description: |
                    Add metadata labels to all intermediate stage images of a multistage build, including the final image.
                    If set to true, save-stages must also be set to true.
                    If enabled, the labels 'io.buildah.stage.name' and 'io.buildah.stage.base' will be added.
                  in: query
                  name: stage-labels
                  type: boolean
                - description: |
                    JSON map of key, value pairs to set as labels on the new image
                    (As of version 1.xx)
                  in: query
                  name: labels
                  type: string
                - default: bridge
                  description: |
                    Sets the networking mode for the run commands during build.
                    Supported standard values are:
                      * `bridge` limited to containers within a single host, port mapping required for external access
                      * `host` no isolation between host and containers on this network
                      * `none` disable all networking for this container
                      * container:<nameOrID> share networking with given container
                      ---All other values are assumed to be a custom network's name
                    (As of version 1.xx)
                  in: query
                  name: networkmode
                  type: string
                - description: |
                    Platform format os[/arch[/variant]]
                    Can be comma separated list for multi arch builds.
                    (As of version 1.xx)
                  in: query
                  name: platform
                  type: string
                - description: |
                    Target build stage
                    (As of version 1.xx)
                  in: query
                  name: target
                  type: string
                - description: |
                    output configuration TBD
                    (As of version 1.xx)
                  in: query
                  name: outputs
                  type: string
                - description: |
                    A tar archive compressed with one of the following algorithms:
                    identity (no compression), gzip, bzip2, xz.
                  in: body
                  name: inputStream
                  schema:
                    format: binary
                    type: string
            produces:
                - application/json
            responses:
                "200":
                    description: OK (As of version 1.xx)
                    schema:
                        properties:
                            stream:
                                description: output from build process
                                example: |
                                    (build details...)
                                    Successfully built 8ba084515c724cbf90d447a63600c0a6
                                    Successfully tagged your_image:latest
                                type: string
                        required:
                            - stream
                        type: object
                "400":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Build image
            tags:
                - images (compat)
    /commit:
        post:
            description: Create a new image from a container
            operationId: ImageCommit
            parameters:
                - description: the name or ID of a container
                  in: query
                  name: container
                  type: string
                - description: the repository name for the created image
                  in: query
                  name: repo
                  type: string
                - description: tag name for the created image
                  in: query
                  name: tag
                  type: string
                - description: commit message
                  in: query
                  name: comment
                  type: string
                - description: author of the image
                  in: query
                  name: author
                  type: string
                - description: pause the container before committing it
                  in: query
                  name: pause
                  type: boolean
                - description: instructions to apply while committing in Dockerfile format
                  in: query
                  name: changes
                  type: string
                - description: squash newly built layers into a single new layer
                  in: query
                  name: squash
                  type: boolean
            produces:
                - application/json
            responses:
                "201":
                    description: no error
                "404":
                    $ref: '#/responses/imageNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: New Image
            tags:
                - containers (compat)
    /containers/{name}:
        delete:
            operationId: ContainerDelete
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - default: false
                  description: If the container is running, kill it before removing it.
                  in: query
                  name: force
                  type: boolean
                - default: false
                  description: Remove the volumes associated with the container.
                  in: query
                  name: v
                  type: boolean
                - description: not supported
                  in: query
                  name: link
                  type: boolean
                - default: false
                  description: Ignore if a specified container does not exist.
                  in: query
                  name: ignore
                  type: boolean
                - default: false
                  description: Remove container dependencies.
                  in: query
                  name: depend
                  type: boolean
                - description: Number of seconds to wait before forcibly stopping the container.
                  in: query
                  name: timeout
                  type: integer
                - default: false
                  description: Remove anonymous volumes associated with the container.
                  in: query
                  name: volumes
                  type: boolean
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/containerNotFound'
                "409":
                    $ref: '#/responses/conflictError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Remove a container
            tags:
                - containers (compat)
    /containers/{name}/archive:
        get:
            description: Get a tar archive of files from a container
            operationId: ContainerArchive
            parameters:
                - description: container name or id
                  in: path
                  name: name
                  required: true
                  type: string
                - description: Path to a directory in the container to extract
                  in: query
                  name: path
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    description: no error
                    schema:
                        format: binary
                        type: string
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Get files from a container
            tags:
                - containers (compat)
        put:
            description: Put a tar archive of files into a container
            operationId: PutContainerArchive
            parameters:
                - description: container name or id
                  in: path
                  name: name
                  required: true
                  type: string
                - description: Path to a directory in the container to extract
                  in: query
                  name: path
                  required: true
                  type: string
                - description: if unpacking the given content would cause an existing directory to be replaced with a non-directory and vice versa (1 or true)
                  in: query
                  name: noOverwriteDirNonDir
                  type: string
                - description: copy UID/GID maps to the dest file or di (1 or true)
                  in: query
                  name: copyUIDGID
                  type: string
                - description: tarfile of files to copy into the container
                  in: body
                  name: request
                  schema:
                    type: string
            produces:
                - application/json
            responses:
                "200":
                    description: no error
                "400":
                    $ref: '#/responses/badParamError'
                "403":
                    description: the container rootfs is read-only
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Put files into a container
            tags:
                - containers (compat)
    /containers/{name}/attach:
        post:
            description: |
                Attach to a container to read its output or send it input. You can attach
                to the same container multiple times and you can reattach to containers
                that have been detached.

                It uses the same stream format as docker, see the libpod attach endpoint for a description of the format.
            operationId: ContainerAttach
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: keys to use for detaching from the container
                  in: query
                  name: detachKeys
                  type: string
                - description: Stream all logs from the container across the connection. Happens before streaming attach (if requested). At least one of logs or stream must be set
                  in: query
                  name: logs
                  type: boolean
                - default: true
                  description: Attach to the container. If unset, and logs is set, only the container's logs will be sent. At least one of stream or logs must be set
                  in: query
                  name: stream
                  type: boolean
                - description: Attach to container STDOUT
                  in: query
                  name: stdout
                  type: boolean
                - description: Attach to container STDERR
                  in: query
                  name: stderr
                  type: boolean
                - description: Attach to container STDIN
                  in: query
                  name: stdin
                  type: boolean
            produces:
                - application/json
            responses:
                "101":
                    description: No error, connection has been hijacked for transporting streams.
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Attach to a container
            tags:
                - containers (compat)
    /containers/{name}/changes:
        get:
            description: |
                Returns which files in a container's filesystem have been added, deleted, or modified. The Kind of modification can be one of:

                0: Modified
                1: Added
                2: Deleted
            operationId: ContainerChanges
            parameters:
                - description: the name or id of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: specify a second layer which is used to compare against it instead of the parent layer
                  in: query
                  name: parent
                  type: string
                - description: select what you want to match, default is all
                  enum:
                    - all
                    - container
                    - image
                  in: query
                  name: diffType
                  type: string
            responses:
                "200":
                    description: Array of Changes
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Report on changes to container's filesystem; adds, deletes or modifications.
            tags:
                - containers (compat)
    /containers/{name}/exec:
        post:
            description: Create an exec session to run a command inside a running container. Exec sessions will be automatically removed 5 minutes after they exit.
            operationId: ContainerExec
            parameters:
                - description: name of container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: Attributes for create
                  in: body
                  name: control
                  schema:
                    properties:
                        AttachStderr:
                            description: Attach to stderr of the exec command
                            type: boolean
                        AttachStdin:
                            description: Attach to stdin of the exec command
                            type: boolean
                        AttachStdout:
                            description: Attach to stdout of the exec command
                            type: boolean
                        Cmd:
                            description: Command to run, as a string or array of strings.
                            items:
                                type: string
                            type: array
                        DetachKeys:
                            description: |
                                "Override the key sequence for detaching a container. Format is a single character [a-Z] or ctrl-<value> where <value> is one of: a-z, @, ^, [, , or _."
                            type: string
                        Env:
                            description: A list of environment variables in the form ["VAR=value", ...]
                            items:
                                type: string
                            type: array
                        Privileged:
                            default: false
                            description: Runs the exec process with extended privileges
                            type: boolean
                        Tty:
                            description: Allocate a pseudo-TTY
                            type: boolean
                        User:
                            description: |
                                "The user, and optionally, group to run the exec process inside the container. Format is one of: user, user:group, uid, or uid:gid."
                            type: string
                        WorkingDir:
                            description: The working directory for the exec process inside the container.
                            type: string
                    type: object
            produces:
                - application/json
            responses:
                "201":
                    description: no error
                "404":
                    $ref: '#/responses/containerNotFound'
                "409":
                    description: container is paused
                "500":
                    $ref: '#/responses/internalError'
            summary: Create an exec instance
            tags:
                - exec (compat)
    /containers/{name}/export:
        get:
            description: Export the contents of a container as a tarball.
            operationId: ContainerExport
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    description: tarball is returned in body
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Export a container
            tags:
                - containers (compat)
    /containers/{name}/json:
        get:
            description: Return low-level information about a container.
            operationId: ContainerInspect
            parameters:
                - description: the name or id of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - default: false
                  description: include the size of the container
                  in: query
                  name: size
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/containerInspectResponse'
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Inspect container
            tags:
                - containers (compat)
    /containers/{name}/kill:
        post:
            description: Signal to send to the container as an integer or string (e.g. SIGINT)
            operationId: ContainerKill
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - default: false
                  description: Send kill signal to all containers
                  in: query
                  name: all
                  type: boolean
                - default: SIGKILL
                  description: signal to be sent to container
                  in: query
                  name: signal
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "404":
                    $ref: '#/responses/containerNotFound'
                "409":
                    $ref: '#/responses/conflictError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Kill container
            tags:
                - containers (compat)
    /containers/{name}/logs:
        get:
            description: Get stdout and stderr logs from a container.
            operationId: ContainerLogs
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: Keep connection after returning logs.
                  in: query
                  name: follow
                  type: boolean
                - description: Return logs from stdout
                  in: query
                  name: stdout
                  type: boolean
                - description: Return logs from stderr
                  in: query
                  name: stderr
                  type: boolean
                - description: Only return logs since this time, as a UNIX timestamp
                  in: query
                  name: since
                  type: string
                - description: Only return logs before this time, as a UNIX timestamp
                  in: query
                  name: until
                  type: string
                - default: false
                  description: Add timestamps to every log line
                  in: query
                  name: timestamps
                  type: boolean
                - default: all
                  description: Only return this number of log lines from the end of the logs
                  in: query
                  name: tail
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    description: logs returned as a stream in response body.
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Get container logs
            tags:
                - containers (compat)
    /containers/{name}/pause:
        post:
            description: Use the cgroups freezer to suspend all processes in a container.
            operationId: ContainerPause
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Pause container
            tags:
                - containers (compat)
    /containers/{name}/rename:
        post:
            description: Change the name of an existing container.
            operationId: ContainerRename
            parameters:
                - description: Full or partial ID or full name of the container to rename
                  in: path
                  name: name
                  required: true
                  type: string
                - description: New name for the container
                  in: query
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "404":
                    $ref: '#/responses/containerNotFound'
                "409":
                    $ref: '#/responses/conflictError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Rename an existing container
            tags:
                - containers (compat)
    /containers/{name}/resize:
        post:
            description: Resize the terminal attached to a container (for use with Attach).
            operationId: ContainerResize
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: Height to set for the terminal, in characters
                  in: query
                  name: h
                  type: integer
                - description: Width to set for the terminal, in characters
                  in: query
                  name: w
                  type: integer
                - description: Ignore containers not running errors
                  in: query
                  name: running
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/ok'
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Resize a container's TTY
            tags:
                - containers (compat)
    /containers/{name}/restart:
        post:
            operationId: ContainerRestart
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: timeout before sending kill signal to container
                  in: query
                  name: t
                  type: integer
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Restart container
            tags:
                - containers (compat)
    /containers/{name}/start:
        post:
            operationId: ContainerStart
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - default: ctrl-p,ctrl-q
                  description: 'Override the key sequence for detaching a container. Format is a single character [a-Z] or ctrl-<value> where <value> is one of: a-z, @, ^, [, , or _.'
                  in: query
                  name: detachKeys
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "304":
                    $ref: '#/responses/containerAlreadyStartedError'
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Start a container
            tags:
                - containers (compat)
    /containers/{name}/stats:
        get:
            description: This returns a live stream of a container’s resource usage statistics.
            operationId: ContainerStats
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - default: true
                  description: Stream the output
                  in: query
                  name: stream
                  type: boolean
                - default: false
                  description: Provide a one-shot response in which preCPU stats are blank, resulting in a single cycle return.
                  in: query
                  name: one-shot
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    description: no error
                    schema:
                        type: object
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Get stats for a container
            tags:
                - containers (compat)
    /containers/{name}/stop:
        post:
            description: Stop a container
            operationId: ContainerStop
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: number of seconds to wait before killing container
                  in: query
                  name: t
                  type: integer
                - description: Number of seconds to wait before killing the container (libpod alias for `t`).
                  in: query
                  name: timeout
                  type: integer
                - default: false
                  description: Do not return an error if the container is already stopped.
                  in: query
                  name: ignore
                  type: boolean
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "304":
                    $ref: '#/responses/containerAlreadyStoppedError'
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Stop a container
            tags:
                - containers (compat)
    /containers/{name}/top:
        get:
            operationId: ContainerTop
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - default: -ef
                  description: arguments to pass to ps such as aux.
                  in: query
                  name: ps_args
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/containerTopResponse'
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: List processes running inside a container
            tags:
                - containers (compat)
    /containers/{name}/unpause:
        post:
            description: Resume a paused container
            operationId: ContainerUnpause
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Unpause container
            tags:
                - containers (compat)
    /containers/{name}/update:
        post:
            description: Change configuration settings for an existing container without requiring recreation.
            operationId: ContainerUpdate
            parameters:
                - description: Full or partial ID or full name of the container to rename
                  in: path
                  name: name
                  required: true
                  type: string
                - description: attributes for updating the container
                  in: body
                  name: resources
                  schema:
                    $ref: '#/definitions/containerUpdateRequest'
            produces:
                - application/json
            responses:
                "200":
                    description: no error
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Update configuration of an existing container, allowing changes to resource limits
            tags:
                - containers (compat)
    /containers/{name}/wait:
        post:
            description: |
                Block until a container stops or given condition is met.
                This is a Docker-compatible endpoint.
            operationId: ContainerWait
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - default: not-running
                  description: |
                    Wait condition.  Valid values are:
                      - not-running (default) - return when the container is not running
                        (stopped, exited, or was never started).
                      - next-exit - wait for the next time the container stops.
                        If the container is running, block until it exits.
                        If the container is already stopped, block until
                        the next start-and-exit cycle.
                      - removed - wait until the container is removed.
                  in: query
                  name: condition
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/containerWaitResponse'
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Wait on a container
            tags:
                - containers (compat)
    /containers/create:
        post:
            operationId: ContainerCreate
            parameters:
                - description: container name
                  in: query
                  name: name
                  type: string
                - description: Container to create
                  in: body
                  name: body
                  required: true
                  schema:
                    $ref: '#/definitions/CreateContainerConfig'
            produces:
                - application/json
            responses:
                "201":
                    $ref: '#/responses/containerCreateResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/containerNotFound'
                "409":
                    $ref: '#/responses/conflictError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Create a container
            tags:
                - containers (compat)
    /containers/json:
        get:
            description: Returns a list of containers
            operationId: ContainerList
            parameters:
                - default: false
                  description: Return all containers. By default, only running containers are shown
                  in: query
                  name: all
                  type: boolean
                - default: false
                  description: Return containers in storage not controlled by Podman
                  in: query
                  name: external
                  type: boolean
                - description: Return this number of most recently created containers, including non-running ones.
                  in: query
                  name: limit
                  type: integer
                - default: false
                  description: Return the size of container as fields SizeRw and SizeRootFs.
                  in: query
                  name: size
                  type: boolean
                - description: |
                    A JSON encoded value of the filters (a `map[string][]string`) to process on the containers list. Available filters:
                    - `ancestor`=(`<image-name>[:<tag>]`, `<image id>`, or `<image@digest>`)
                    - `before`=(`<container id>` or `<container name>`)
                    - `expose`=(`<port>[/<proto>]` or `<startport-endport>/[<proto>]`)
                    - `exited=<int>` containers with exit code of `<int>`
                    - `health`=(`starting`, `healthy`, `unhealthy` or `none`)
                    - `id=<ID>` a container's ID
                    - `is-task`=(`true` or `false`)
                    - `label`=(`key` or `"key=value"`) of a container label
                    - `name=<name>` a container's name
                    - `network`=(`<network id>` or `<network name>`)
                    - `publish`=(`<port>[/<proto>]` or `<startport-endport>/[<proto>]`)
                    - `since`=(`<container id>` or `<container name>`)
                    - `status`=(`created`, `restarting`, `running`, `removing`, `paused`, `exited` or `dead`)
                    - `volume`=(`<volume name>` or `<mount point destination>`)
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/containersList'
                "400":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
            summary: List containers
            tags:
                - containers (compat)
    /containers/prune:
        post:
            description: Remove containers not in use
            operationId: ContainerPrune
            parameters:
                - description: |
                    Filters to process on the prune list, encoded as JSON (a `map[string][]string`).  Available filters:
                     - `until=<timestamp>` Prune containers created before this timestamp. The `<timestamp>` can be Unix timestamps, date formatted timestamps, or Go duration strings (e.g. `10m`, `1h30m`) computed relative to the daemon machine’s time.
                     - `label` (`label=<key>`, `label=<key>=<value>`, `label!=<key>`, or `label!=<key>=<value>`) Prune containers with (or without, in case `label!=...` is used) the specified labels.
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/containersPrune'
                "500":
                    $ref: '#/responses/internalError'
            summary: Delete stopped containers
            tags:
                - containers (compat)
    /events:
        get:
            description: Returns events filtered on query parameters
            operationId: SystemEvents
            parameters:
                - description: start streaming events from this time
                  in: query
                  name: since
                  type: string
                - description: stop streaming events later than this
                  in: query
                  name: until
                  type: string
                - description: JSON encoded map[string][]string of constraints
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    description: returns a string of json data describing an event
                "500":
                    $ref: '#/responses/internalError'
            summary: Get events
            tags:
                - system (compat)
    /exec/{id}/json:
        get:
            description: Return low-level information about an exec instance.
            operationId: ExecInspect
            parameters:
                - description: Exec instance ID
                  in: path
                  name: id
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/execSessionInspect'
                "404":
                    $ref: '#/responses/execSessionNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Inspect an exec instance
            tags:
                - exec (compat)
    /exec/{id}/resize:
        post:
            description: |
                Resize the TTY session used by an exec instance. This endpoint only works if tty was specified as part of creating and starting the exec instance.
            operationId: ExecResize
            parameters:
                - description: Exec instance ID
                  in: path
                  name: id
                  required: true
                  type: string
                - description: Height of the TTY session in characters
                  in: query
                  name: h
                  type: integer
                - description: Width of the TTY session in characters
                  in: query
                  name: w
                  type: integer
                - description: Ignore containers not running errors
                  in: query
                  name: running
                  type: boolean
            produces:
                - application/json
            responses:
                "201":
                    description: no error
                "404":
                    $ref: '#/responses/execSessionNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Resize an exec instance
            tags:
                - exec (compat)
    /exec/{id}/start:
        post:
            description: Starts a previously set up exec instance. If detach is true, this endpoint returns immediately after starting the command. Otherwise, it sets up an interactive session with the command.
            operationId: ExecStart
            parameters:
                - description: Exec instance ID
                  in: path
                  name: id
                  required: true
                  type: string
                - description: Attributes for start
                  in: body
                  name: control
                  schema:
                    properties:
                        Detach:
                            description: Detach from the command. Not presently supported.
                            type: boolean
                        Tty:
                            description: Allocate a pseudo-TTY. Presently ignored.
                            type: boolean
                    type: object
            produces:
                - application/octet-stream
            responses:
                "200":
                    description: no error
                "404":
                    $ref: '#/responses/execSessionNotFound'
                "409":
                    description: container is not running
                "500":
                    $ref: '#/responses/internalError'
            summary: Start an exec instance
            tags:
                - exec (compat)
    /images/{name}:
        delete:
            description: Delete an image from local storage
            operationId: ImageDelete
            parameters:
                - description: name or ID of image to delete
                  in: path
                  name: name
                  required: true
                  type: string
                - description: Remove the image even if it is being used by stopped containers or has other tags
                  in: query
                  name: force
                  type: boolean
                - description: do not remove dangling parent images
                  in: query
                  name: noprune
                  type: boolean
                - default: false
                  description: Ignore if a specified image does not exist and do not throw an error.
                  in: query
                  name: ignore
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/imageDeleteResponse'
                "404":
                    $ref: '#/responses/imageNotFound'
                "409":
                    $ref: '#/responses/conflictError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Remove Image
            tags:
                - images (compat)
    /images/{name}/get:
        get:
            description: Export an image in tarball format
            operationId: ImageGet
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/x-tar
            responses:
                "200":
                    description: no error
                    schema:
                        format: binary
                        type: string
                "500":
                    $ref: '#/responses/internalError'
            summary: Export an image
            tags:
                - images (compat)
    /images/{name}/history:
        get:
            description: Return parent layers of an image.
            operationId: ImageHistory
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/history'
                "404":
                    $ref: '#/responses/imageNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: History of an image
            tags:
                - images (compat)
    /images/{name}/json:
        get:
            description: Return low-level information about an image.
            operationId: ImageInspect
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/imageInspect'
                "404":
                    $ref: '#/responses/imageNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Inspect an image
            tags:
                - images (compat)
    /images/{name}/push:
        post:
            description: Push an image to a container registry
            operationId: ImagePush
            parameters:
                - description: Name of image to push.
                  in: path
                  name: name
                  required: true
                  type: string
                - description: The tag to associate with the image on the registry.
                  in: query
                  name: tag
                  type: string
                - description: All indicates whether to push all images related to the image list
                  in: query
                  name: all
                  type: boolean
                - description: Use compression on image.
                  in: query
                  name: compress
                  type: boolean
                - description: Allows for pushing the image to a different destination than the image refers to.
                  in: query
                  name: destination
                  type: string
                - description: Manifest type (oci, v2s1, or v2s2) to use when pushing an image. Default is manifest type of source, with fallbacks.
                  in: query
                  name: format
                  type: string
                - default: true
                  description: Require TLS verification.
                  in: query
                  name: tlsVerify
                  type: boolean
                - description: A base64-encoded auth configuration.
                  in: header
                  name: X-Registry-Auth
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    description: no error
                    schema:
                        format: binary
                        type: string
                "404":
                    $ref: '#/responses/imageNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Push Image
            tags:
                - images (compat)
    /images/{name}/tag:
        post:
            description: Tag an image so that it becomes part of a repository.
            operationId: ImageTag
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: the repository to tag in
                  in: query
                  name: repo
                  type: string
                - description: the name of the new tag
                  in: query
                  name: tag
                  type: string
            produces:
                - application/json
            responses:
                "201":
                    description: no error
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/imageNotFound'
                "409":
                    $ref: '#/responses/conflictError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Tag an image
            tags:
                - images (compat)
    /images/create:
        post:
            consumes:
                - text/plain
                - application/octet-stream
            description: Create an image by either pulling it from a registry or importing it.
            operationId: ImageCreate
            parameters:
                - description: A base64-encoded auth configuration.
                  in: header
                  name: X-Registry-Auth
                  type: string
                - description: Name of the image to pull. The name may include a tag or digest. This parameter may only be used when pulling an image. The pull is cancelled if the HTTP connection is closed.
                  in: query
                  name: fromImage
                  type: string
                - description: Source to import. The value may be a URL from which the image can be retrieved or - to read the image from the request body. This parameter may only be used when importing an image
                  in: query
                  name: fromSrc
                  type: string
                - description: Repository name given to an image when it is imported. The repo may include a tag. This parameter may only be used when importing an image.
                  in: query
                  name: repo
                  type: string
                - description: Tag or digest. If empty when pulling an image, this causes all tags for the given image to be pulled.
                  in: query
                  name: tag
                  type: string
                - description: Set commit message for imported image.
                  in: query
                  name: message
                  type: string
                - description: Platform in the format os[/arch[/variant]]
                  in: query
                  name: platform
                  type: string
                - description: Number of times to retry in case of failure when performing pull.
                  in: query
                  name: retry
                  type: integer
                - description: Delay between retries in case of pull failures.
                  in: query
                  name: retryDelay
                  type: string
                - description: Image content if fromSrc parameter was used
                  in: body
                  name: inputImage
                  schema:
                    format: binary
                    type: string
            produces:
                - application/json
            responses:
                "200":
                    description: no error
                    schema:
                        format: binary
                        type: string
                "404":
                    $ref: '#/responses/imageNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Create an image
            tags:
                - images (compat)
    /images/get:
        get:
            description: Get a tarball containing all images and metadata for several image repositories
            operationId: ImageGetAll
            parameters:
                - description: one or more image names or IDs comma separated
                  in: query
                  name: names
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    description: no error
                    schema:
                        format: binary
                        type: string
                "500":
                    $ref: '#/responses/internalError'
            summary: Export several images
            tags:
                - images (compat)
    /images/json:
        get:
            description: Returns a list of images on the server. Note that it uses a different, smaller representation of an image than inspecting a single image.
            operationId: ImageList
            parameters:
                - default: false
                  description: Show all images. Only images from a final layer (no children) are shown by default.
                  in: query
                  name: all
                  type: boolean
                - description: |
                    JSON-encoded string containing filters as a `map[string][]string` to process on the images list. Available filters:
                    - `before`=(`<image-name>[:<tag>]`,  `<image id>` or `<image@digest>`)
                    - `dangling=true`
                    - `label=key` or `label="key=value"` of an image label
                    - `reference`=(`<image-name>[:<tag>]`)
                    - `since`=(`<image-name>[:<tag>]`,  `<image id>` or `<image@digest>`)
                  in: query
                  name: filters
                  type: string
                - default: false
                  description: Not supported
                  in: query
                  name: digests
                  type: boolean
                - default: false
                  description: Compute and show shared size as a SharedSize field on each image.
                  in: query
                  name: shared-size
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/imageList'
                "500":
                    $ref: '#/responses/internalError'
            summary: List Images
            tags:
                - images (compat)
    /images/load:
        post:
            description: Load a set of images and tags into a repository.
            operationId: ImageLoad
            parameters:
                - description: not supported
                  in: query
                  name: quiet
                  type: boolean
                - description: tarball of container image
                  in: body
                  name: request
                  schema:
                    type: string
            produces:
                - application/json
            responses:
                "200":
                    description: no error
                "500":
                    $ref: '#/responses/internalError'
            summary: Import image
            tags:
                - images (compat)
    /images/prune:
        post:
            description: Remove images from local storage that are not being used by a container
            operationId: ImagePrune
            parameters:
                - description: |
                    filters to apply to image pruning, encoded as JSON (map[string][]string). Available filters:
                      - `dangling=<boolean>` When set to `true` (or `1`), prune only
                         unused *and* untagged images. When set to `false`
                         (or `0`), all unused images are pruned.
                      - `until=<string>` Prune images created before this timestamp. The `<timestamp>` can be Unix timestamps, date formatted timestamps, or Go duration strings (e.g. `10m`, `1h30m`) computed relative to the daemon machine’s time.
                      - `label` (`label=<key>`, `label=<key>=<value>`, `label!=<key>`, or `label!=<key>=<value>`) Prune images with (or without, in case `label!=...` is used) the specified labels.
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/imageDeleteResponse'
                "500":
                    $ref: '#/responses/internalError'
            summary: Prune unused images
            tags:
                - images (compat)
    /images/search:
        get:
            description: Search registries for an image
            operationId: ImageSearch
            parameters:
                - description: term to search
                  in: query
                  name: term
                  type: string
                - default: 25
                  description: maximum number of results
                  in: query
                  name: limit
                  type: integer
                - description: |
                    JSON-encoded string containing filters as a `map[string][]string` to process on the images list. Available filters:
                    - `is-automated=(true|false)`
                    - `is-official=(true|false)`
                    - `stars=<number>` Matches images that have at least 'number' stars.
                  in: query
                  name: filters
                  type: string
                - default: true
                  description: Require HTTPS and verify signatures when contacting registries.
                  in: query
                  name: tlsVerify
                  type: boolean
                - description: list the available tags in the repository
                  in: query
                  name: listTags
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/registrySearchResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Search images
            tags:
                - images (compat)
    /info:
        get:
            description: Returns information on the system and libpod configuration
            operationId: SystemInfo
            produces:
                - application/json
            responses:
                "200":
                    description: to be determined
                "500":
                    $ref: '#/responses/internalError'
            summary: Get info
            tags:
                - system (compat)
    /libpod/_ping:
        get:
            description: |
                Return protocol information in response headers.
                `HEAD /libpod/_ping` is also supported.
                `/_ping` is available for compatibility with other engines.
                The '_ping' endpoints are not versioned.
            operationId: SystemPing
            produces:
                - text/plain
            responses:
                "200":
                    description: Success
                    headers:
                        API-Version:
                            description: Max compatibility API Version the server supports
                            type: string
                        BuildKit-Version:
                            description: Default version of docker image builder
                            type: string
                        Cache-Control:
                            description: always no-cache
                            type: string
                        Docker-Experimental:
                            description: If the server is running with experimental mode enabled, always true
                            type: boolean
                        Libpod-API-Version:
                            description: |
                                Max Podman API Version the server supports.
                                Available if service is backed by Podman, therefore may be used to
                                determine if talking to Podman engine or another engine
                            type: string
                        Libpod-Buildah-Version:
                            description: |
                                Default version of libpod image builder.
                                  Available if service is backed by Podman, therefore may be used to
                                  determine if talking to Podman engine or another engine
                            type: string
                        Pragma:
                            description: always no-cache
                            type: string
                    schema:
                        description: OK
                        example: OK
                        type: string
                "500":
                    $ref: '#/responses/internalError'
            summary: Ping service
            tags:
                - system (compat)
                - system
    /libpod/artifacts/{name}:
        delete:
            description: Remove a single artifact from local storage by name or ID.
            operationId: ArtifactDeleteLibpod
            parameters:
                - description: Name or ID of the artifact to remove
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/artifactRemoveResponse'
                "404":
                    $ref: '#/responses/artifactNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Remove an artifact
            tags:
                - artifacts
    /libpod/artifacts/{name}/extract:
        get:
            description: Extract the files of an OCI artifact to the local filesystem as a tar archive.
            operationId: ArtifactExtractLibpod
            parameters:
                - description: Name or digest of the artifact
                  in: path
                  name: name
                  required: true
                  type: string
                - description: Only extract the file with the given title
                  in: query
                  name: title
                  type: string
                - description: Only extract the file with the given digest
                  in: query
                  name: digest
                  type: string
                - description: |
                    When extracting a single file from an artifact, don't use the files title as the file name in the tar archive
                  in: query
                  name: excludeTitle
                  type: boolean
            produces:
                - application/x-tar
            responses:
                "200":
                    description: Extract successful
                    schema:
                        type: file
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/artifactNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Extract an artifacts contents
            tags:
                - artifacts
    /libpod/artifacts/{name}/json:
        get:
            description: |
                Retrieve detailed information about a specific OCI artifact by name or ID.
            operationId: ArtifactInspectLibpod
            parameters:
                - description: Name or ID of the artifact
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/inspectArtifactResponse'
                "404":
                    $ref: '#/responses/artifactNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Inspect an artifact
            tags:
                - artifacts
    /libpod/artifacts/{name}/push:
        post:
            description: Push an OCI artifact from local storage to a remote image registry.
            operationId: ArtifactPushLibpod
            parameters:
                - description: Mandatory reference to the artifact (e.g., quay.io/image/artifact:tag)
                  in: path
                  name: name
                  required: true
                  type: string
                - default: 3
                  description: Number of times to retry in case of failure when performing pull
                  in: query
                  name: retry
                  type: integer
                - default: 1s
                  description: Delay between retries in case of pull failures (e.g., 10s)
                  in: query
                  name: retryDelay
                  type: string
                - default: true
                  description: Require TLS verification
                  in: query
                  name: tlsVerify
                  type: boolean
                - description: |
                    base-64 encoded auth config.
                    Must include the following four values: username, password, email and server address
                    OR simply just an identity token.
                  in: header
                  name: X-Registry-Auth
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/artifactPushResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "401":
                    $ref: '#/responses/artifactBadAuth'
                "404":
                    $ref: '#/responses/artifactNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Push an artifact
            tags:
                - artifacts
    /libpod/artifacts/add:
        post:
            consumes:
                - application/octet-stream
            description: |
                Add a file as a new OCI artifact, or append to an existing artifact if 'append' is true.
            operationId: ArtifactAddLibpod
            parameters:
                - description: Mandatory reference to the artifact (e.g., quay.io/image/artifact:tag)
                  in: query
                  name: name
                  required: true
                  type: string
                - description: Path of the file to be added
                  in: query
                  name: fileName
                  required: true
                  type: string
                - description: Optionally set the type of file
                  in: query
                  name: fileMIMEType
                  type: string
                - description: Array of annotation strings e.g "test=true"
                  in: query
                  items:
                    type: string
                  name: annotations
                  type: array
                - description: Use type to describe an artifact
                  in: query
                  name: artifactMIMEType
                  type: string
                - default: false
                  description: Append files to an existing artifact
                  in: query
                  name: append
                  type: boolean
                - default: false
                  description: Replace an existing artifact with the same name
                  in: query
                  name: replace
                  type: boolean
                - description: Binary stream of the file to add to an artifact
                  in: body
                  name: inputStream
                  schema:
                    format: binary
                    type: string
            produces:
                - application/json
            responses:
                "201":
                    $ref: '#/responses/artifactAddResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/artifactNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Add a file as an artifact
            tags:
                - artifacts
    /libpod/artifacts/json:
        get:
            description: Return a list of all OCI artifacts in local storage.
            operationId: ArtifactListLibpod
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/artifactListResponse'
                "500":
                    $ref: '#/responses/internalError'
            summary: List artifacts
            tags:
                - artifacts
    /libpod/artifacts/local/add:
        post:
            description: |
                Add a file from the local filesystem as a new OCI artifact, or append to an existing artifact if 'append' is true.
            operationId: ArtifactLocalLibpod
            parameters:
                - description: Mandatory reference to the artifact (e.g., quay.io/image/artifact:tag)
                  in: query
                  name: name
                  required: true
                  type: string
                - description: Absolute path to the local file on the server filesystem to be added
                  in: query
                  name: path
                  required: true
                  type: string
                - description: Name/title of the file within the artifact
                  in: query
                  name: fileName
                  required: true
                  type: string
                - description: Optionally set the MIME type of the file
                  in: query
                  name: fileMIMEType
                  type: string
                - description: Array of annotation strings e.g "test=true"
                  in: query
                  items:
                    type: string
                  name: annotations
                  type: array
                - description: Use type to describe an artifact
                  in: query
                  name: artifactMIMEType
                  type: string
                - default: false
                  description: Append files to an existing artifact
                  in: query
                  name: append
                  type: boolean
                - default: false
                  description: Replace an existing artifact with the same name
                  in: query
                  name: replace
                  type: boolean
            produces:
                - application/json
            responses:
                "201":
                    $ref: '#/responses/artifactAddResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/artifactNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Add a local file as an artifact
            tags:
                - artifacts
    /libpod/artifacts/pull:
        post:
            description: Pull an OCI artifact from a remote registry to local storage.
            operationId: ArtifactPullLibpod
            parameters:
                - description: Mandatory reference to the artifact (e.g., quay.io/image/artifact:tag)
                  in: query
                  name: name
                  required: true
                  type: string
                - default: 3
                  description: Number of times to retry in case of failure when performing pull
                  in: query
                  name: retry
                  type: integer
                - default: 1s
                  description: Delay between retries in case of pull failures (e.g., 10s)
                  in: query
                  name: retryDelay
                  type: string
                - default: true
                  description: Require TLS verification
                  in: query
                  name: tlsVerify
                  type: boolean
                - description: |
                    base-64 encoded auth config.
                    Must include the following four values: username, password, email and server address
                    OR simply just an identity token.
                  in: header
                  name: X-Registry-Auth
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/artifactPullResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "401":
                    $ref: '#/responses/artifactBadAuth'
                "404":
                    $ref: '#/responses/artifactNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Pull an artifact
            tags:
                - artifacts
    /libpod/artifacts/remove:
        delete:
            description: |
                Remove one or more OCI artifacts from local storage.
                Can be filtered by name/ID or all artifacts can be removed.
            operationId: ArtifactDeleteAllLibpod
            parameters:
                - description: List of artifact names/IDs to remove
                  in: query
                  items:
                    type: string
                  name: artifacts
                  type: array
                - description: Remove all artifacts
                  in: query
                  name: all
                  type: boolean
                - description: Ignore errors if artifact does not exist
                  in: query
                  name: ignore
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/artifactRemoveResponse'
                "404":
                    $ref: '#/responses/artifactNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Remove one or more artifacts
            tags:
                - artifacts
    /libpod/build:
        post:
            description: Build an image from the given Dockerfile(s)
            operationId: ImageBuildLibpod
            parameters:
                - default: application/x-tar
                  enum:
                    - application/x-tar
                    - multipart/form-data
                  in: header
                  name: Content-Type
                  type: string
                - in: header
                  name: X-Registry-Config
                  type: string
                - default: Dockerfile
                  description: |
                    Path within the build context to the `Dockerfile`.
                    This is ignored if remote is specified and points to an external `Dockerfile`.
                  in: query
                  name: dockerfile
                  type: string
                - default: latest
                  description: A name and optional tag to apply to the image in the `name:tag` format.  If you omit the tag, the default latest value is assumed. You can provide several t parameters.
                  in: query
                  name: t
                  type: string
                - default: false
                  description: |
                    Instead of building for a set of platforms specified using the platform option, inspect the build's base images,
                    and build for all of the platforms that are available.  Stages that use *scratch* as a starting point can not be inspected,
                    so at least one non-*scratch* stage must be present for detection to work usefully.
                  in: query
                  name: allplatforms
                  type: boolean
                - default: []
                  description: |
                    Additional build contexts for builds that require more than one context.
                    Each additional context must be specified as a key-value pair in the format "name=value".

                    The value can be specified in two formats:
                    - URL context: Use the prefix "url:" followed by a URL to a tar archive
                      Example: "mycontext=url:https://example.com/context.tar"
                    - Image context: Use the prefix "image:" followed by an image reference
                      Example: "mycontext=image:alpine:latest" or "mycontext=image:docker.io/library/ubuntu:22.04"

                    Local contexts are provided via multipart/form-data upload. When using multipart/form-data,
                    include additional build contexts as separate form fields with names prefixed by "build-context-".
                    For example, a local context named "mycontext" should be uploaded as a tar file in a field
                    named "build-context-mycontext".

                    (As of version 5.6.0)
                  in: query
                  items:
                    type: string
                  name: additionalbuildcontexts
                  type: array
                - description: |
                    TBD Extra hosts to add to /etc/hosts
                    (As of version 1.xx)
                  in: query
                  name: extrahosts
                  type: string
                - description: |
                    Not to create /etc/hosts when building the image
                  in: query
                  name: nohosts
                  type: boolean
                - description: |
                    A Git repository URI or HTTP/HTTPS context URI.
                    If the URI points to a single text file, the file’s contents are placed
                    into a file called Dockerfile and the image is built from that file. If
                    the URI points to a tarball, the file is downloaded by the daemon and the
                    contents therein used as the context for the build. If the URI points to a
                    tarball and the dockerfile parameter is also specified, there must be a file
                    with the corresponding path inside the tarball.
                    (As of version 1.xx)
                  in: query
                  name: remote
                  type: string
                - default: false
                  description: |
                    Suppress verbose build output
                  in: query
                  name: q
                  type: boolean
                - default: false
                  description: |
                    Contents of volume locations to be modified on ADD or COPY only
                    (As of Podman version v5.2)
                  in: query
                  name: compatvolumes
                  type: boolean
                - default: true
                  description: |
                    Add an "org.opencontainers.image.created" annotation to the
                    image.
                    (As of Podman version v5.6)
                  in: query
                  name: createdannotation
                  type: boolean
                - description: |
                    Timestamp to use for newly-added history entries and the image's
                    creation date.
                    (As of Podman version v5.6)
                  in: query
                  name: sourcedateepoch
                  type: number
                - default: false
                  description: |
                    If sourcedateepoch is set, force new content added in layers to
                    have timestamps no later than the sourcedateepoch date.
                    (As of Podman version v5.6)
                  in: query
                  name: rewritetimestamp
                  type: boolean
                - description: |
                    Timestamp to use for newly-added history entries, the image's
                    creation date, and for new content added in layers.
                  in: query
                  name: timestamp
                  type: number
                - default: true
                  description: |
                    Inherit the labels from the base image or base stages
                    (As of Podman version v5.5)
                  in: query
                  name: inheritlabels
                  type: boolean
                - default: true
                  description: |
                    Inherit the annotations from the base image or base stages
                    (As of Podman version v5.6)
                  in: query
                  name: inheritannotations
                  type: boolean
                - default: false
                  description: |
                    Do not use the cache when building the image
                    (As of version 1.xx)
                  in: query
                  name: nocache
                  type: boolean
                - description: |
                    JSON array of images used to build cache resolution
                    (As of version 1.xx)
                  in: query
                  name: cachefrom
                  type: string
                - default: false
                  description: |
                    Attempt to pull the image even if an older image exists locally
                    (As of version 1.xx)
                  in: query
                  name: pull
                  type: boolean
                - default: true
                  description: |
                    Remove intermediate containers after a successful build
                    (As of version 1.xx)
                  in: query
                  name: rm
                  type: boolean
                - default: false
                  description: |
                    Always remove intermediate containers, even upon failure
                    (As of version 1.xx)
                  in: query
                  name: forcerm
                  type: boolean
                - description: |
                    Memory is the upper limit (in bytes) on how much memory running containers can use
                    (As of version 1.xx)
                  in: query
                  name: memory
                  type: integer
                - description: |
                    MemorySwap limits the amount of memory and swap together
                    (As of version 1.xx)
                  in: query
                  name: memswap
                  type: integer
                - description: |
                    CPUShares (relative weight
                    (As of version 1.xx)
                  in: query
                  name: cpushares
                  type: integer
                - description: |
                    CPUSetCPUs in which to allow execution (0-3, 0,1)
                    (As of version 1.xx)
                  in: query
                  name: cpusetcpus
                  type: string
                - description: |
                    CPUPeriod limits the CPU CFS (Completely Fair Scheduler) period
                    (As of version 1.xx)
                  in: query
                  name: cpuperiod
                  type: integer
                - description: |
                    CPUQuota limits the CPU CFS (Completely Fair Scheduler) quota
                    (As of version 1.xx)
                  in: query
                  name: cpuquota
                  type: integer
                - description: |
                    JSON map of string pairs denoting build-time variables.
                    For example, the build argument `Foo` with the value of `bar` would be encoded in JSON as `["Foo":"bar"]`.

                    For example, buildargs={"Foo":"bar"}.

                    Note(s):
                    * This should not be used to pass secrets.
                    * The value of buildargs should be URI component encoded before being passed to the API.

                    (As of version 1.xx)
                  in: query
                  name: buildargs
                  type: string
                - default: 67108864
                  description: |
                    ShmSize is the "size" value to use when mounting an shmfs on the container's /dev/shm directory.
                    Default is 64MB
                    (As of version 1.xx)
                  in: query
                  name: shmsize
                  type: integer
                - default: false
                  description: |
                    Silently ignored.
                    Squash the resulting images layers into a single layer
                    (As of version 1.xx)
                  in: query
                  name: squash
                  type: boolean
                - description: |
                    JSON map of key, value pairs to set as labels on the new image
                    (As of version 1.xx)
                  in: query
                  name: labels
                  type: string
                - description: Add an intermediate image *label* (e.g. label=*value*) to the intermediate image metadata.
                  in: query
                  items:
                    type: string
                  name: layerLabel
                  type: array
                - default: true
                  description: |
                    Cache intermediate layers during build.
                    (As of version 1.xx)
                  in: query
                  name: layers
                  type: boolean
                - default: bridge
                  description: |
                    Sets the networking mode for the run commands during build.
                    Supported standard values are:
                      * `bridge` limited to containers within a single host, port mapping required for external access
                      * `host` no isolation between host and containers on this network
                      * `none` disable all networking for this container
                      * container:<nameOrID> share networking with given container
                      ---All other values are assumed to be a custom network's name
                    (As of version 1.xx)
                  in: query
                  name: networkmode
                  type: string
                - description: |
                    Platform format os[/arch[/variant]]
                    (As of version 1.xx)
                  in: query
                  name: platform
                  type: string
                - description: |
                    Target build stage
                    (As of version 1.xx)
                  in: query
                  name: target
                  type: string
                - description: |
                    output configuration TBD
                    (As of version 1.xx)
                  in: query
                  name: outputs
                  type: string
                - description: |
                    Inject http proxy environment variables into container
                    (As of version 2.0.0)
                  in: query
                  name: httpproxy
                  type: boolean
                - description: Unset environment variables from the final image.
                  in: query
                  items:
                    type: string
                  name: unsetenv
                  type: array
                - description: Unset the image label, causing the label not to be inherited from the base image.
                  in: query
                  items:
                    type: string
                  name: unsetlabel
                  type: array
                - description: |
                    Unset the image annotation, causing the annotation not to be inherited from the base image.
                    (As of Podman version v5.6)
                  in: query
                  items:
                    type: string
                  name: unsetannotation
                  type: array
                - description: Extra volumes that should be mounted in the build container.
                  in: query
                  items:
                    type: string
                  name: volume
                  type: array
                - description: |
                    Add the image to the specified manifest list. Creates a manifest list if it does not exist.
                  in: query
                  name: manifest
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    description: OK (As of version 1.xx)
                    schema:
                        properties:
                            stream:
                                description: output from build process
                                example: |
                                    (build details...)
                                type: string
                        required:
                            - stream
                        type: object
                "400":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Build image
            tags:
                - images
    /libpod/commit:
        post:
            description: Create a new image from a container
            operationId: ImageCommitLibpod
            parameters:
                - description: the name or ID of a container
                  in: query
                  name: container
                  required: true
                  type: string
                - description: author of the image
                  in: query
                  name: author
                  type: string
                - description: instructions to apply while committing in Dockerfile format (i.e. "CMD=/bin/foo")
                  in: query
                  items:
                    type: string
                  name: changes
                  type: array
                - description: commit message
                  in: query
                  name: comment
                  type: string
                - description: format of the image manifest and metadata (default "oci")
                  in: query
                  name: format
                  type: string
                - description: pause the container before committing it
                  in: query
                  name: pause
                  type: boolean
                - description: squash the container before committing it
                  in: query
                  name: squash
                  type: boolean
                - description: the repository name for the created image
                  in: query
                  name: repo
                  type: string
                - description: output from commit process
                  in: query
                  name: stream
                  type: boolean
                - description: tag name for the created image
                  in: query
                  name: tag
                  type: string
            produces:
                - application/json
            responses:
                "201":
                    description: no error
                "404":
                    $ref: '#/responses/imageNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Commit
            tags:
                - containers
    /libpod/containers/{name}:
        delete:
            description: Delete container
            operationId: ContainerDeleteLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: additionally remove containers that depend on the container to be removed
                  in: query
                  name: depend
                  type: boolean
                - description: force stop container if running
                  in: query
                  name: force
                  type: boolean
                - description: ignore errors when the container to be removed does not existxo
                  in: query
                  name: ignore
                  type: boolean
                - default: 10
                  description: number of seconds to wait before killing container when force removing
                  in: query
                  name: timeout
                  type: integer
                - description: delete volumes
                  in: query
                  name: v
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/containerRemoveLibpod'
                "204":
                    description: no error
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/containerNotFound'
                "409":
                    $ref: '#/responses/conflictError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Delete container
            tags:
                - containers
    /libpod/containers/{name}/archive:
        get:
            description: Copy a tar archive of files from a container
            operationId: ContainerArchiveLibpod
            parameters:
                - description: container name or id
                  in: path
                  name: name
                  required: true
                  type: string
                - description: Path to a directory in the container to extract
                  in: query
                  name: path
                  required: true
                  type: string
                - description: JSON encoded map[string]string to translate paths
                  in: query
                  name: rename
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    description: no error
                    schema:
                        format: binary
                        type: string
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Copy files from a container
            tags:
                - containers (compat)
        put:
            description: Copy a tar archive of files into a container
            operationId: PutContainerArchiveLibpod
            parameters:
                - description: container name or id
                  in: path
                  name: name
                  required: true
                  type: string
                - description: Path to a directory in the container to extract
                  in: query
                  name: path
                  required: true
                  type: string
                - default: true
                  description: pause the container while copying (defaults to true)
                  in: query
                  name: pause
                  type: boolean
                - description: tarfile of files to copy into the container
                  in: body
                  name: request
                  schema:
                    type: string
            produces:
                - application/json
            responses:
                "200":
                    description: no error
                "400":
                    $ref: '#/responses/badParamError'
                "403":
                    description: the container rootfs is read-only
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Copy files into a container
            tags:
                - containers
    /libpod/containers/{name}/attach:
        post:
            description: |
                Attach to a container to read its output or send it input. You can attach
                to the same container multiple times and you can reattach to containers
                that have been detached.

                ### Hijacking

                This endpoint hijacks the HTTP connection to transport `stdin`, `stdout`,
                and `stderr` on the same socket.

                This is the response from the service for an attach request:

                ```
                HTTP/1.1 200 OK
                Content-Type: application/vnd.docker.raw-stream

                [STREAM]
                ```

                After the headers and two new lines, the TCP connection can now be used
                for raw, bidirectional communication between the client and server.

                To inform potential proxies about connection hijacking, the client
                can also optionally send connection upgrade headers.

                For example, the client sends this request to upgrade the connection:

                ```
                POST /v4.6.0/libpod/containers/16253994b7c4/attach?stream=1&stdout=1 HTTP/1.1
                Upgrade: tcp
                Connection: Upgrade
                ```

                The service will respond with a `101 UPGRADED` response, and will
                similarly follow with the raw stream:

                ```
                HTTP/1.1 101 UPGRADED
                Content-Type: application/vnd.docker.raw-stream
                Connection: Upgrade
                Upgrade: tcp

                [STREAM]
                ```

                ### Stream format

                When the TTY setting is disabled for the container,
                the HTTP Content-Type header is set to application/vnd.docker.multiplexed-stream
                (starting with v4.7.0, previously application/vnd.docker.raw-stream was always used)
                and the stream over the hijacked connected is multiplexed to separate out
                `stdout` and `stderr`. The stream consists of a series of frames, each
                containing a header and a payload.

                The header contains the information about the output stream type and the size of
                the payload.
                It is encoded on the first eight bytes like this:

                ```go
                header := [8]byte{STREAM_TYPE, 0, 0, 0, SIZE1, SIZE2, SIZE3, SIZE4}
                ```

                `STREAM_TYPE` can be:

                - 0: `stdin` (is written on `stdout`)
                - 1: `stdout`
                - 2: `stderr`

                `SIZE1, SIZE2, SIZE3, SIZE4` are the four bytes of the `uint32` size
                encoded as big endian.

                Following the header is the payload, which contains the specified number of
                bytes as written in the size.

                The simplest way to implement this protocol is the following:

                1. Read 8 bytes.
                2. Choose `stdout` or `stderr` depending on the first byte.
                3. Extract the frame size from the last four bytes.
                4. Read the extracted size and output it on the correct output.
                5. Goto 1.

                ### Stream format when using a TTY

                When the TTY setting is enabled for the container,
                the stream is not multiplexed. The data exchanged over the hijacked
                connection is simply the raw data from the process PTY and client's
                `stdin`.
            operationId: ContainerAttachLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: keys to use for detaching from the container
                  in: query
                  name: detachKeys
                  type: string
                - description: Stream all logs from the container across the connection. Happens before streaming attach (if requested). At least one of logs or stream must be set
                  in: query
                  name: logs
                  type: boolean
                - default: true
                  description: Attach to the container. If unset, and logs is set, only the container's logs will be sent. At least one of stream or logs must be set
                  in: query
                  name: stream
                  type: boolean
                - description: Attach to container STDOUT
                  in: query
                  name: stdout
                  type: boolean
                - description: Attach to container STDERR
                  in: query
                  name: stderr
                  type: boolean
                - description: Attach to container STDIN
                  in: query
                  name: stdin
                  type: boolean
            produces:
                - application/json
            responses:
                "101":
                    description: No error, connection has been hijacked for transporting streams.
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Attach to a container
            tags:
                - containers
    /libpod/containers/{name}/changes:
        get:
            description: |
                Returns which files in a container's filesystem have been added, deleted, or modified. The Kind of modification can be one of:

                0: Modified
                1: Added
                2: Deleted
            operationId: ContainerChangesLibpod
            parameters:
                - description: the name or id of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: specify a second layer which is used to compare against it instead of the parent layer
                  in: query
                  name: parent
                  type: string
                - description: select what you want to match, default is all
                  enum:
                    - all
                    - container
                    - image
                  in: query
                  name: diffType
                  type: string
            responses:
                "200":
                    description: Array of Changes
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Report on changes to container's filesystem; adds, deletes or modifications.
            tags:
                - containers
    /libpod/containers/{name}/checkpoint:
        post:
            operationId: ContainerCheckpointLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: keep all temporary checkpoint files
                  in: query
                  name: keep
                  type: boolean
                - description: leave the container running after writing checkpoint to disk
                  in: query
                  name: leaveRunning
                  type: boolean
                - description: checkpoint a container with established TCP connections
                  in: query
                  name: tcpEstablished
                  type: boolean
                - description: export the checkpoint image to a tar.gz
                  in: query
                  name: export
                  type: boolean
                - description: do not include root file-system changes when exporting. can only be used with export
                  in: query
                  name: ignoreRootFS
                  type: boolean
                - description: do not include associated volumes. can only be used with export
                  in: query
                  name: ignoreVolumes
                  type: boolean
                - description: dump the container's memory information only, leaving the container running. only works on runc 1.0-rc or higher
                  in: query
                  name: preCheckpoint
                  type: boolean
                - description: check out the container with previous criu image files in pre-dump. only works on runc 1.0-rc or higher
                  in: query
                  name: withPrevious
                  type: boolean
                - description: checkpoint a container with filelocks
                  in: query
                  name: fileLocks
                  type: boolean
                - description: add checkpoint statistics to the returned CheckpointReport
                  in: query
                  name: printStats
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    description: tarball is returned in body if exported
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Checkpoint a container
            tags:
                - containers
    /libpod/containers/{name}/exec:
        post:
            description: Create an exec session to run a command inside a running container. Exec sessions will be automatically removed 5 minutes after they exit.
            operationId: ContainerExecLibpod
            parameters:
                - description: name of container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: Attributes for create
                  in: body
                  name: control
                  schema:
                    properties:
                        AttachStderr:
                            description: Attach to stderr of the exec command
                            type: boolean
                        AttachStdin:
                            description: Attach to stdin of the exec command
                            type: boolean
                        AttachStdout:
                            description: Attach to stdout of the exec command
                            type: boolean
                        Cmd:
                            description: Command to run, as a string or array of strings.
                            items:
                                type: string
                            type: array
                        DetachKeys:
                            description: |
                                "Override the key sequence for detaching a container. Format is a single character [a-Z] or ctrl-<value> where <value> is one of: a-z, @, ^, [, , or _."
                            type: string
                        Env:
                            description: A list of environment variables in the form ["VAR=value", ...]
                            items:
                                type: string
                            type: array
                        Privileged:
                            default: false
                            description: Runs the exec process with extended privileges
                            type: boolean
                        Tty:
                            description: Allocate a pseudo-TTY
                            type: boolean
                        User:
                            description: |
                                "The user, and optionally, group to run the exec process inside the container. Format is one of: user, user:group, uid, or uid:gid."
                            type: string
                        WorkingDir:
                            description: The working directory for the exec process inside the container.
                            type: string
                    type: object
            produces:
                - application/json
            responses:
                "201":
                    description: no error
                "404":
                    $ref: '#/responses/containerNotFound'
                "409":
                    description: container is paused
                "500":
                    $ref: '#/responses/internalError'
            summary: Create an exec instance
            tags:
                - exec
    /libpod/containers/{name}/exists:
        get:
            description: Quick way to determine if a container exists by name or ID
            operationId: ContainerExistsLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: container exists
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Check if container exists
            tags:
                - containers
    /libpod/containers/{name}/export:
        get:
            description: Export the contents of a container as a tarball.
            operationId: ContainerExportLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    description: tarball is returned in body
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Export a container
            tags:
                - containers
    /libpod/containers/{name}/healthcheck:
        get:
            description: Execute the defined healthcheck and return information about the results
            operationId: ContainerHealthcheckLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/healthCheck'
                "404":
                    $ref: '#/responses/containerNotFound'
                "409":
                    description: container has no healthcheck or is not running
                "500":
                    $ref: '#/responses/internalError'
            summary: Run a container's healthcheck
            tags:
                - containers
    /libpod/containers/{name}/init:
        post:
            description: Performs all tasks necessary for initializing the container but does not start the container.
            operationId: ContainerInitLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "304":
                    description: container already initialized
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Initialize a container
            tags:
                - containers
    /libpod/containers/{name}/json:
        get:
            description: Return low-level information about a container.
            operationId: ContainerInspectLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: display filesystem usage
                  in: query
                  name: size
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/containerInspectResponseLibpod'
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Inspect container
            tags:
                - containers
    /libpod/containers/{name}/kill:
        post:
            description: send a signal to a container, defaults to killing the container
            operationId: ContainerKillLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - default: SIGKILL
                  description: signal to be sent to container, either by integer or SIG_ name
                  in: query
                  name: signal
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "404":
                    $ref: '#/responses/containerNotFound'
                "409":
                    $ref: '#/responses/conflictError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Kill container
            tags:
                - containers
    /libpod/containers/{name}/logs:
        get:
            description: |
                Get stdout and stderr logs from a container.

                The stream format is the same as described in the attach endpoint.
            operationId: ContainerLogsLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: Keep connection after returning logs.
                  in: query
                  name: follow
                  type: boolean
                - description: Return logs from stdout
                  in: query
                  name: stdout
                  type: boolean
                - description: Return logs from stderr
                  in: query
                  name: stderr
                  type: boolean
                - description: Only return logs since this time, as a UNIX timestamp
                  in: query
                  name: since
                  type: string
                - description: Only return logs before this time, as a UNIX timestamp
                  in: query
                  name: until
                  type: string
                - default: false
                  description: Add timestamps to every log line
                  in: query
                  name: timestamps
                  type: boolean
                - default: all
                  description: Only return this number of log lines from the end of the logs
                  in: query
                  name: tail
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    description: logs returned as a stream in response body.
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Get container logs
            tags:
                - containers
    /libpod/containers/{name}/mount:
        post:
            description: Mount a container to the filesystem
            operationId: ContainerMountLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - default: false
                  description: Include external containers that are not managed by Podman.
                  in: query
                  name: external
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    description: mounted container
                    schema:
                        description: id
                        example: /var/lib/containers/storage/overlay/f3f693bd88872a1e3193f4ebb925f4c282e8e73aadb8ab3e7492754dda3a02a4/merged
                        type: string
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Mount a container
            tags:
                - containers
    /libpod/containers/{name}/pause:
        post:
            description: Use the cgroups freezer to suspend all processes in a container.
            operationId: ContainerPauseLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Pause a container
            tags:
                - containers
    /libpod/containers/{name}/rename:
        post:
            description: Change the name of an existing container.
            operationId: ContainerRenameLibpod
            parameters:
                - description: Full or partial ID or full name of the container to rename
                  in: path
                  name: name
                  required: true
                  type: string
                - description: New name for the container
                  in: query
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "404":
                    $ref: '#/responses/containerNotFound'
                "409":
                    $ref: '#/responses/conflictError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Rename an existing container
            tags:
                - containers
    /libpod/containers/{name}/resize:
        post:
            description: Resize the terminal attached to a container (for use with Attach).
            operationId: ContainerResizeLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: Height to set for the terminal, in characters
                  in: query
                  name: h
                  type: integer
                - description: Width to set for the terminal, in characters
                  in: query
                  name: w
                  type: integer
                - description: Ignore containers not running errors
                  in: query
                  name: running
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/ok'
                "404":
                    $ref: '#/responses/containerNotFound'
                "409":
                    $ref: '#/responses/conflictError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Resize a container's TTY
            tags:
                - containers
    /libpod/containers/{name}/restart:
        post:
            operationId: ContainerRestartLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: number of seconds to wait before killing container (Docker compatibility)
                  in: query
                  name: t
                  type: integer
                - description: number of seconds to wait before killing container
                  in: query
                  name: timeout
                  type: integer
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Restart a container
            tags:
                - containers
    /libpod/containers/{name}/restore:
        post:
            description: Restore a container from a checkpoint.
            operationId: ContainerRestoreLibpod
            parameters:
                - description: the name or id of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: the name of the container when restored from a tar. can only be used with import
                  in: query
                  name: name
                  type: string
                - description: keep all temporary checkpoint files
                  in: query
                  name: keep
                  type: boolean
                - description: restore a container with established TCP connections
                  in: query
                  name: tcpEstablished
                  type: boolean
                - description: restore a container but close the TCP connections
                  in: query
                  name: tcpClose
                  type: boolean
                - description: import the restore from a checkpoint tar.gz
                  in: query
                  name: import
                  type: boolean
                - description: do not include root file-system changes when exporting. can only be used with import
                  in: query
                  name: ignoreRootFS
                  type: boolean
                - description: do not restore associated volumes. can only be used with import
                  in: query
                  name: ignoreVolumes
                  type: boolean
                - description: ignore IP address if set statically
                  in: query
                  name: ignoreStaticIP
                  type: boolean
                - description: ignore MAC address if set statically
                  in: query
                  name: ignoreStaticMAC
                  type: boolean
                - description: restore a container with file locks
                  in: query
                  name: fileLocks
                  type: boolean
                - description: add restore statistics to the returned RestoreReport
                  in: query
                  name: printStats
                  type: boolean
                - description: pod to restore into
                  in: query
                  name: pod
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    description: tarball is returned in body if exported
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Restore a container
            tags:
                - containers
    /libpod/containers/{name}/start:
        post:
            operationId: ContainerStartLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - default: ctrl-p,ctrl-q
                  description: 'Override the key sequence for detaching a container. Format is a single character [a-Z] or ctrl-<value> where <value> is one of: a-z, @, ^, [, , or _.'
                  in: query
                  name: detachKeys
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "304":
                    $ref: '#/responses/containerAlreadyStartedError'
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Start a container
            tags:
                - containers
    /libpod/containers/{name}/stats:
        get:
            description: DEPRECATED. This endpoint will be removed with the next major release. Please use /libpod/containers/stats instead.
            operationId: ContainerStatsLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - default: true
                  description: Stream the output
                  in: query
                  name: stream
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    description: no error
                "404":
                    $ref: '#/responses/containerNotFound'
                "409":
                    $ref: '#/responses/conflictError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Get stats for a container
            tags:
                - containers
    /libpod/containers/{name}/stop:
        post:
            operationId: ContainerStopLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - default: 10
                  description: number of seconds to wait before killing container
                  in: query
                  name: timeout
                  type: integer
                - default: false
                  description: do not return error if container is already stopped
                  in: query
                  name: ignore
                  type: boolean
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "304":
                    $ref: '#/responses/containerAlreadyStoppedError'
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Stop a container
            tags:
                - containers
    /libpod/containers/{name}/top:
        get:
            description: List processes running inside a container
            operationId: ContainerTopLibpod
            parameters:
                - description: Name of container to query for processes (As of version 1.xx)
                  in: path
                  name: name
                  required: true
                  type: string
                - description: when true, repeatedly stream the latest output (As of version 4.0)
                  in: query
                  name: stream
                  type: boolean
                - default: 5
                  description: if streaming, delay in seconds between updates. Must be >1. (As of version 4.0)
                  in: query
                  name: delay
                  type: integer
                - description: |
                    arguments to pass to ps such as aux.
                  in: query
                  items:
                    type: string
                  name: ps_args
                  type: array
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/containerTopResponse'
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: List processes
            tags:
                - containers
    /libpod/containers/{name}/unmount:
        post:
            description: Unmount a container from the filesystem
            operationId: ContainerUnmountLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: ok
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Unmount a container
            tags:
                - containers
    /libpod/containers/{name}/unpause:
        post:
            operationId: ContainerUnpauseLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Unpause Container
            tags:
                - containers
    /libpod/containers/{name}/update:
        post:
            description: Updates the configuration of an existing container, allowing changes to resource limits and healthchecks.
            operationId: ContainerUpdateLibpod
            parameters:
                - description: Full or partial ID or full name of the container to update
                  in: path
                  name: name
                  required: true
                  type: string
                - description: New restart policy for the container.
                  in: query
                  name: restartPolicy
                  type: string
                - description: New amount of retries for the container's restart policy. Only allowed if restartPolicy is set to on-failure
                  in: query
                  name: restartRetries
                  type: integer
                - description: attributes for updating the container
                  in: body
                  name: config
                  schema:
                    $ref: '#/definitions/UpdateEntities'
            produces:
                - application/json
            responses:
                "201":
                    $ref: '#/responses/containerUpdateResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Updates the configuration of an existing container, allowing changes to resource limits and healthchecks
            tags:
                - containers
    /libpod/containers/{name}/wait:
        post:
            description: Wait on a container to meet a given condition
            operationId: ContainerWaitLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: Conditions to wait for. If no condition provided the 'exited' condition is assumed.
                  in: query
                  items:
                    enum:
                        - configured
                        - created
                        - exited
                        - healthy
                        - initialized
                        - paused
                        - removing
                        - running
                        - stopped
                        - stopping
                        - unhealthy
                    type: string
                  name: condition
                  type: array
                - default: 250ms
                  description: Time Interval to wait before polling for completion.
                  in: query
                  name: interval
                  type: string
            produces:
                - application/json
                - text/plain
            responses:
                "200":
                    description: Status code
                    examples:
                        text/plain: 137
                    schema:
                        format: int32
                        type: integer
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Wait on a container
            tags:
                - containers
    /libpod/containers/create:
        post:
            operationId: ContainerCreateLibpod
            parameters:
                - description: attributes for creating a container
                  in: body
                  name: create
                  required: true
                  schema:
                    $ref: '#/definitions/SpecGenerator'
            produces:
                - application/json
            responses:
                "201":
                    $ref: '#/responses/containerCreateResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/containerNotFound'
                "409":
                    $ref: '#/responses/conflictError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Create a container
            tags:
                - containers
    /libpod/containers/json:
        get:
            description: Returns a list of containers
            operationId: ContainerListLibpod
            parameters:
                - default: false
                  description: Return all containers. By default, only running containers are shown
                  in: query
                  name: all
                  type: boolean
                - description: Return this number of most recently created containers, including non-running ones.
                  in: query
                  name: limit
                  type: integer
                - description: Alias for `limit`. Return this number of most recently created containers.
                  in: query
                  name: last
                  type: integer
                - default: false
                  description: Return containers created by external tools that use container storage.
                  in: query
                  name: external
                  type: boolean
                - default: false
                  description: Include namespace information
                  in: query
                  name: namespace
                  type: boolean
                - default: false
                  description: Ignored. Previously included details on pod name and ID that are currently included by default.
                  in: query
                  name: pod
                  type: boolean
                - default: false
                  description: Return the size of container as fields SizeRw and SizeRootFs.
                  in: query
                  name: size
                  type: boolean
                - default: false
                  description: Sync container state with OCI runtime
                  in: query
                  name: sync
                  type: boolean
                - description: |
                    A JSON encoded value of the filters (a `map[string][]string`) to process on the containers list. Available filters:
                    - `ancestor`=(`<image-name>[:<tag>]`, `<image id>`, or `<image@digest>`)
                    - `before`=(`<container id>` or `<container name>`)
                    - `expose`=(`<port>[/<proto>]` or `<startport-endport>/[<proto>]`)
                    - `exited=<int>` containers with exit code of `<int>`
                    - `health`=(`starting`, `healthy`, `unhealthy` or `none`)
                    - `id=<ID>` a container's ID
                    - `is-task`=(`true` or `false`)
                    - `label`=(`key` or `"key=value"`) of a container label
                    - `name=<name>` a container's name
                    - `network`=(`<network id>` or `<network name>`)
                    - `pod`=(`<pod id>` or `<pod name>`)
                    - `publish`=(`<port>[/<proto>]` or `<startport-endport>/[<proto>]`)
                    - `since`=(`<container id>` or `<container name>`)
                    - `status`=(`created`, `restarting`, `running`, `removing`, `paused`, `exited` or `dead`)
                    - `volume`=(`<volume name>` or `<mount point destination>`)
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/containersListLibpod'
                "400":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
            summary: List containers
            tags:
                - containers
    /libpod/containers/prune:
        post:
            description: Remove containers not in use
            operationId: ContainerPruneLibpod
            parameters:
                - description: |
                    Filters to process on the prune list, encoded as JSON (a `map[string][]string`).  Available filters:
                     - `until=<timestamp>` Prune containers created before this timestamp. The `<timestamp>` can be Unix timestamps, date formatted timestamps, or Go duration strings (e.g. `10m`, `1h30m`) computed relative to the daemon machine’s time.
                     - `label` (`label=<key>`, `label=<key>=<value>`, `label!=<key>`, or `label!=<key>=<value>`) Prune containers with (or without, in case `label!=...` is used) the specified labels.
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/containersPruneLibpod'
                "500":
                    $ref: '#/responses/internalError'
            summary: Delete stopped containers
            tags:
                - containers
    /libpod/containers/showmounted:
        get:
            description: Lists all mounted containers mount points
            operationId: ContainerShowMountedLibpod
            produces:
                - application/json
            responses:
                "200":
                    description: mounted containers
                    schema:
                        additionalProperties:
                            type: string
                        type: object
                "500":
                    $ref: '#/responses/internalError'
            summary: Show mounted containers
            tags:
                - containers
    /libpod/containers/stats:
        get:
            description: Return a live stream of resource usage statistics of one or more container. If no container is specified, the statistics of all containers are returned.
            operationId: ContainersStatsAllLibpod
            parameters:
                - description: names or IDs of containers
                  in: query
                  items:
                    type: string
                  name: containers
                  type: array
                - default: true
                  description: Stream the output
                  in: query
                  name: stream
                  type: boolean
                - default: 5
                  description: Time in seconds between stats reports
                  in: query
                  name: interval
                  type: integer
                - default: false
                  description: Provide statistics for all running containers
                  in: query
                  name: all
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/containerStats'
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Get stats for one or more containers
            tags:
                - containers
    /libpod/events:
        get:
            description: Returns events filtered on query parameters
            operationId: SystemEventsLibpod
            parameters:
                - description: start streaming events from this time
                  in: query
                  name: since
                  type: string
                - description: stop streaming events later than this
                  in: query
                  name: until
                  type: string
                - description: JSON encoded map[string][]string of constraints
                  in: query
                  name: filters
                  type: string
                - default: true
                  description: when false, do not follow events
                  in: query
                  name: stream
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    description: returns a string of json data describing an event
                "500":
                    $ref: '#/responses/internalError'
            summary: Get events
            tags:
                - system
    /libpod/exec/{id}/json:
        get:
            description: Return low-level information about an exec instance.
            operationId: ExecInspectLibpod
            parameters:
                - description: Exec instance ID
                  in: path
                  name: id
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    description: no error
                "404":
                    $ref: '#/responses/execSessionNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Inspect an exec instance
            tags:
                - exec
    /libpod/exec/{id}/resize:
        post:
            description: |
                Resize the TTY session used by an exec instance. This endpoint only works if tty was specified as part of creating and starting the exec instance.
            operationId: ExecResizeLibpod
            parameters:
                - description: Exec instance ID
                  in: path
                  name: id
                  required: true
                  type: string
                - description: Height of the TTY session in characters
                  in: query
                  name: h
                  type: integer
                - description: Width of the TTY session in characters
                  in: query
                  name: w
                  type: integer
                - description: Ignore containers not running errors
                  in: query
                  name: running
                  type: boolean
            produces:
                - application/json
            responses:
                "201":
                    description: no error
                "404":
                    $ref: '#/responses/execSessionNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Resize an exec instance
            tags:
                - exec
    /libpod/exec/{id}/start:
        post:
            description: |
                Starts a previously set up exec instance. If detach is true, this endpoint returns immediately after starting the command.
                Otherwise, it sets up an interactive session with the command. The stream format is the same as the attach endpoint.
            operationId: ExecStartLibpod
            parameters:
                - description: Exec instance ID
                  in: path
                  name: id
                  required: true
                  type: string
                - description: Attributes for start
                  in: body
                  name: control
                  schema:
                    properties:
                        Detach:
                            description: Detach from the command.
                            type: boolean
                        Tty:
                            description: Allocate a pseudo-TTY.
                            type: boolean
                        h:
                            description: Height of the TTY session in characters. Tty must be set to true to use it.
                            type: integer
                        w:
                            description: Width of the TTY session in characters. Tty must be set to true to use it.
                            type: integer
                    type: object
            produces:
                - application/json
            responses:
                "200":
                    description: no error
                "404":
                    $ref: '#/responses/execSessionNotFound'
                "409":
                    description: container is not running.
                "500":
                    $ref: '#/responses/internalError'
            summary: Start an exec instance
            tags:
                - exec
    /libpod/generate/{name}/systemd:
        get:
            description: Generate Systemd Units based on a pod or container.
            operationId: GenerateSystemdLibpod
            parameters:
                - description: Name or ID of the container or pod.
                  in: path
                  name: name
                  required: true
                  type: string
                - default: false
                  description: Use container/pod names instead of IDs.
                  in: query
                  name: useName
                  type: boolean
                - default: false
                  description: Create a new container instead of starting an existing one.
                  in: query
                  name: new
                  type: boolean
                - default: false
                  description: Do not generate the header including the Podman version and the timestamp.
                  in: query
                  name: noHeader
                  type: boolean
                - default: 0
                  description: Start timeout in seconds.
                  in: query
                  name: startTimeout
                  type: integer
                - default: 10
                  description: Stop timeout in seconds.
                  in: query
                  name: stopTimeout
                  type: integer
                - default: on-failure
                  description: Systemd restart-policy.
                  enum:
                    - "no"
                    - on-success
                    - on-failure
                    - on-abnormal
                    - on-watchdog
                    - on-abort
                    - always
                  in: query
                  name: restartPolicy
                  type: string
                - default: container
                  description: Systemd unit name prefix for containers.
                  in: query
                  name: containerPrefix
                  type: string
                - default: pod
                  description: Systemd unit name prefix for pods.
                  in: query
                  name: podPrefix
                  type: string
                - default: '-'
                  description: Systemd unit name separator between name/id and prefix.
                  in: query
                  name: separator
                  type: string
                - default: 0
                  description: Configures the time to sleep before restarting a service.
                  in: query
                  name: restartSec
                  type: integer
                - default: []
                  description: Systemd Wants list for the container or pods.
                  in: query
                  items:
                    type: string
                  name: wants
                  type: array
                - default: []
                  description: Systemd After list for the container or pods.
                  in: query
                  items:
                    type: string
                  name: after
                  type: array
                - default: []
                  description: Systemd Requires list for the container or pods.
                  in: query
                  items:
                    type: string
                  name: requires
                  type: array
                - default: []
                  description: Set environment variables to the systemd unit files.
                  in: query
                  items:
                    type: string
                  name: additionalEnvVariables
                  type: array
                - default: false
                  description: Add template specifier for the systemd unit file names.
                  in: query
                  name: templateUnitFile
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    description: no error
                    schema:
                        additionalProperties:
                            type: string
                        type: object
                "500":
                    $ref: '#/responses/internalError'
            summary: Generate Systemd Units
            tags:
                - containers
                - pods
    /libpod/generate/kube:
        get:
            description: Generate Kubernetes YAML based on a pod or container.
            operationId: GenerateKubeLibpod
            parameters:
                - description: Name or ID of the container or pod.
                  in: query
                  items:
                    type: string
                  name: names
                  required: true
                  type: array
                - default: false
                  description: Generate YAML for a Kubernetes service object.
                  in: query
                  name: service
                  type: boolean
                - default: pod
                  description: Generate YAML for the given Kubernetes kind.
                  in: query
                  name: type
                  type: string
                - default: 0
                  description: Set the replica number for Deployment kind.
                  format: int32
                  in: query
                  name: replicas
                  type: integer
                - default: false
                  description: don't truncate annotations to the Kubernetes maximum length of 63 characters
                  in: query
                  name: noTrunc
                  type: boolean
                - default: false
                  description: add podman-only reserved annotations in generated YAML file (cannot be used by Kubernetes)
                  in: query
                  name: podmanOnly
                  type: boolean
            produces:
                - text/vnd.yaml
                - application/json
            responses:
                "200":
                    description: Kubernetes YAML file describing pod
                    schema:
                        format: binary
                        type: string
                "500":
                    $ref: '#/responses/internalError'
            summary: Generate a Kubernetes YAML file.
            tags:
                - containers
                - pods
    /libpod/images/{name}:
        delete:
            description: Remove an image from the local storage.
            operationId: ImageDeleteLibpod
            parameters:
                - description: name or ID of image to remove
                  in: path
                  name: name
                  required: true
                  type: string
                - description: remove the image even if used by containers or has other tags
                  in: query
                  name: force
                  type: boolean
                - default: false
                  description: Ignore if a specified image does not exist and do not throw an error.
                  in: query
                  name: ignore
                  type: boolean
                - description: Resolve to a manifest list instead of an image.
                  in: query
                  name: lookupManifest
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/imagesRemoveResponseLibpod'
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/imageNotFound'
                "409":
                    $ref: '#/responses/conflictError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Remove an image from the local storage.
            tags:
                - images
    /libpod/images/{name}/changes:
        get:
            description: |
                Returns which files in an image's filesystem have been added, deleted, or modified. The Kind of modification can be one of:

                0: Modified
                1: Added
                2: Deleted
            operationId: ImageChangesLibpod
            parameters:
                - description: the name or id of the image
                  in: path
                  name: name
                  required: true
                  type: string
                - description: specify a second layer which is used to compare against it instead of the parent layer
                  in: query
                  name: parent
                  type: string
                - description: select what you want to match, default is all
                  enum:
                    - all
                    - container
                    - image
                  in: query
                  name: diffType
                  type: string
            responses:
                "200":
                    description: Array of Changes
                "404":
                    $ref: '#/responses/containerNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Report on changes to images's filesystem; adds, deletes or modifications.
            tags:
                - images
    /libpod/images/{name}/exists:
        get:
            description: Check if image exists in local store
            operationId: ImageExistsLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: image exists
                "404":
                    $ref: '#/responses/imageNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Image exists
            tags:
                - images
    /libpod/images/{name}/get:
        get:
            description: Export an image
            operationId: ImageGetLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: format for exported image
                  in: query
                  name: format
                  type: string
                - description: use compression on image
                  in: query
                  name: compress
                  type: boolean
            produces:
                - application/x-tar
            responses:
                "200":
                    description: no error
                    schema:
                        format: binary
                        type: string
                "404":
                    $ref: '#/responses/imageNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Export an image
            tags:
                - images
    /libpod/images/{name}/history:
        get:
            description: Return parent layers of an image.
            operationId: ImageHistoryLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/history'
                "404":
                    $ref: '#/responses/imageNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: History of an image
            tags:
                - images
    /libpod/images/{name}/json:
        get:
            description: Obtain low-level information about an image
            operationId: ImageInspectLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/inspectImageResponseLibpod'
                "404":
                    $ref: '#/responses/imageNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Inspect an image
            tags:
                - images
    /libpod/images/{name}/push:
        post:
            description: Push an image to a container registry
            operationId: ImagePushLibpod
            parameters:
                - description: Name of image to push.
                  in: path
                  name: name
                  required: true
                  type: string
                - description: Allows for pushing the image to a different destination than the image refers to.
                  in: query
                  name: destination
                  type: string
                - default: false
                  description: Enforce compressing the layers with the specified --compression and do not reuse differently compressed blobs on the registry.
                  in: query
                  name: forceCompressionFormat
                  type: boolean
                - description: Compression format used to compress image layers.
                  in: query
                  name: compressionFormat
                  type: string
                - description: Compression level used to compress image layers.
                  in: query
                  name: compressionLevel
                  type: integer
                - default: true
                  description: Require TLS verification.
                  in: query
                  name: tlsVerify
                  type: boolean
                - default: true
                  description: Silences extra stream data on push.
                  in: query
                  name: quiet
                  type: boolean
                - description: Manifest type (oci, v2s1, or v2s2) to use when pushing an image. Default is manifest type of source, with fallbacks.
                  in: query
                  name: format
                  type: string
                - description: All indicates whether to push all images related to the image list.
                  in: query
                  name: all
                  type: boolean
                - description: Discard any pre-existing signatures in the image.
                  in: query
                  name: removeSignatures
                  type: boolean
                - description: Number of times to retry push in case of failure.
                  in: query
                  name: retry
                  type: integer
                - description: Delay between retries in case of push failures. Duration format such as "412ms", or "3.5h".
                  in: query
                  name: retryDelay
                  type: string
                - description: A base64-encoded auth configuration.
                  in: header
                  name: X-Registry-Auth
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    description: no error
                    schema:
                        format: binary
                        type: string
                "404":
                    $ref: '#/responses/imageNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Push Image
            tags:
                - images
    /libpod/images/{name}/resolve:
        get:
            description: Resolve the passed image name to a list of fully-qualified images referring to container registries.
            operationId: ImageResolveLibpod
            parameters:
                - description: the (short) name to resolve
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: resolved image names
                "400":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Resolve an image (short) name
            tags:
                - images
    /libpod/images/{name}/tag:
        post:
            description: Tag an image so that it becomes part of a repository.
            operationId: ImageTagLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: the repository to tag in
                  in: query
                  name: repo
                  type: string
                - description: the name of the new tag
                  in: query
                  name: tag
                  type: string
            produces:
                - application/json
            responses:
                "201":
                    description: no error
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/imageNotFound'
                "409":
                    $ref: '#/responses/conflictError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Tag an image
            tags:
                - images
    /libpod/images/{name}/tree:
        get:
            description: Retrieve the image tree for the provided image name or ID
            operationId: ImageTreeLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: show all child images and layers of the specified image
                  in: query
                  name: whatrequires
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/treeResponse'
                "404":
                    $ref: '#/responses/imageNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Image tree
            tags:
                - images
    /libpod/images/{name}/untag:
        post:
            description: Untag an image. If not repo and tag are specified, all tags are removed from the image.
            operationId: ImageUntagLibpod
            parameters:
                - description: the name or ID of the container
                  in: path
                  name: name
                  required: true
                  type: string
                - description: the repository to untag
                  in: query
                  name: repo
                  type: string
                - description: the name of the tag to untag
                  in: query
                  name: tag
                  type: string
            produces:
                - application/json
            responses:
                "201":
                    description: no error
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/imageNotFound'
                "409":
                    $ref: '#/responses/conflictError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Untag an image
            tags:
                - images
    /libpod/images/export:
        get:
            description: Export multiple images into a single object. Only `docker-archive` is currently supported.
            operationId: ImageExportLibpod
            parameters:
                - description: format for exported image (only docker-archive is supported)
                  in: query
                  name: format
                  type: string
                - description: references to images to export
                  in: query
                  items:
                    type: string
                  name: references
                  type: array
                - description: use compression on image
                  in: query
                  name: compress
                  type: boolean
                - description: accept uncompressed layers when copying OCI images
                  in: query
                  name: ociAcceptUncompressedLayers
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    description: no error
                    schema:
                        format: binary
                        type: string
                "404":
                    $ref: '#/responses/imageNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Export multiple images
            tags:
                - images
    /libpod/images/import:
        post:
            consumes:
                - application/x-tar
            description: Import a previously exported tarball as an image.
            operationId: ImageImportLibpod
            parameters:
                - default: application/x-tar
                  enum:
                    - application/x-tar
                  in: header
                  name: Content-Type
                  type: string
                - description: 'Apply the following possible instructions to the created image: CMD | ENTRYPOINT | ENV | EXPOSE | LABEL | STOPSIGNAL | USER | VOLUME | WORKDIR.  JSON encoded string'
                  in: query
                  items:
                    type: string
                  name: changes
                  type: array
                - description: Set commit message for imported image
                  in: query
                  name: message
                  type: string
                - description: Optional Name[:TAG] for the image
                  in: query
                  name: reference
                  type: string
                - description: Load image from the specified URL
                  in: query
                  name: url
                  type: string
                - description: tarball for imported image
                  in: body
                  name: upload
                  required: true
                  schema:
                    format: binary
                    type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/imagesImportResponseLibpod'
                "400":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Import image
            tags:
                - images
    /libpod/images/json:
        get:
            description: Returns a list of images on the server
            operationId: ImageListLibpod
            parameters:
                - default: false
                  description: Show all images. Only images from a final layer (no children) are shown by default.
                  in: query
                  name: all
                  type: boolean
                - description: |
                    JSON-encoded string containing filters as a `map[string][]string` to process on the images list. Available filters:
                    - `before`=(`<image-name>[:<tag>]`,  `<image id>` or `<image@digest>`)
                    - `dangling=true`
                    - `label=key` or `label="key=value"` of an image label
                    - `reference`=(`<image-name>[:<tag>]`)
                    - `id`=(`<image-id>`)
                    - `since`=(`<image-name>[:<tag>]`,  `<image id>` or `<image@digest>`)
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/imageListLibpod'
                "500":
                    $ref: '#/responses/internalError'
            summary: List Images
            tags:
                - images
    /libpod/images/load:
        post:
            consumes:
                - application/x-tar
            description: Load an image (oci-archive or docker-archive) stream.
            operationId: ImageLoadLibpod
            parameters:
                - description: tarball of container image
                  in: body
                  name: upload
                  required: true
                  schema:
                    type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/imagesLoadResponseLibpod'
                "400":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Load image
            tags:
                - images
    /libpod/images/prune:
        post:
            description: Remove images that are not being used by a container
            operationId: ImagePruneLibpod
            parameters:
                - default: false
                  description: |
                    Remove all images not in use by containers, not just dangling ones
                  in: query
                  name: all
                  type: boolean
                - default: false
                  description: |
                    Remove images even when they are used by external containers (e.g, by build containers)
                  in: query
                  name: external
                  type: boolean
                - default: false
                  description: |
                    Remove persistent build cache created by build instructions such as `--mount=type=cache`.
                  in: query
                  name: buildcache
                  type: boolean
                - description: |
                    filters to apply to image pruning, encoded as JSON (map[string][]string). Available filters:
                      - `dangling=<boolean>` When set to `true` (or `1`), prune only
                         unused *and* untagged images. When set to `false`
                         (or `0`), all unused images are pruned.
                      - `until=<string>` Prune images created before this timestamp. The `<timestamp>` can be Unix timestamps, date formatted timestamps, or Go duration strings (e.g. `10m`, `1h30m`) computed relative to the daemon machine’s time.
                      - `label` (`label=<key>`, `label=<key>=<value>`, `label!=<key>`, or `label!=<key>=<value>`) Prune images with (or without, in case `label!=...` is used) the specified labels.
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/imagesPruneLibpod'
                "500":
                    $ref: '#/responses/internalError'
            summary: Prune unused images
            tags:
                - images
    /libpod/images/pull:
        post:
            description: Pull one or more images from a container registry. Error status codes can come either from the API or from the registry. Errors may be detected later even if the HTTP status 200 is returned, and in that case, the error description will be in the `error` field.
            operationId: ImagePullLibpod
            parameters:
                - description: Mandatory reference to the image (e.g., quay.io/image/name:tag)
                  in: query
                  name: reference
                  type: string
                - default: false
                  description: Silence extra stream data on pull. Cannot be used with 'compatMode' or 'pullProgress'.
                  in: query
                  name: quiet
                  type: boolean
                - default: false
                  description: Return the same JSON payload as the Docker-compat endpoint. Cannot be used with 'pullProgress' or 'quiet'.
                  in: query
                  name: compatMode
                  type: boolean
                - default: false
                  description: Send reports about the progress of the pull. Cannot be used with 'compatMode' or 'quiet'.
                  in: query
                  name: pullProgress
                  type: boolean
                - description: Pull image for the specified architecture.
                  in: query
                  name: Arch
                  type: string
                - description: Pull image for the specified operating system.
                  in: query
                  name: OS
                  type: string
                - description: Pull image for the specified variant.
                  in: query
                  name: Variant
                  type: string
                - description: Pull policy, "always" (default), "missing", "newer", "never".
                  in: query
                  name: policy
                  type: string
                - default: true
                  description: Require TLS verification.
                  in: query
                  name: tlsVerify
                  type: boolean
                - description: Pull all tagged images in the repository.
                  in: query
                  name: allTags
                  type: boolean
                - description: 'base-64 encoded auth config. Must include the following four values: username, password, email and server address OR simply just an identity token.'
                  in: header
                  name: X-Registry-Auth
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/imagesPullResponseLibpod'
                "400":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
                default:
                    $ref: '#/responses/errorFromRegistry'
            summary: Pull images
            tags:
                - images
    /libpod/images/remove:
        delete:
            description: Remove one or more images from the storage.
            operationId: ImageDeleteAllLibpod
            parameters:
                - description: Images IDs or names to remove.
                  in: query
                  items:
                    type: string
                  name: images
                  type: array
                - default: true
                  description: Remove all images.
                  in: query
                  name: all
                  type: boolean
                - description: Force image removal (including containers using the images).
                  in: query
                  name: force
                  type: boolean
                - description: Ignore if a specified image does not exist and do not throw an error.
                  in: query
                  name: ignore
                  type: boolean
                - description: Resolves to manifest list instead of image.
                  in: query
                  name: lookupManifest
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/imagesRemoveResponseLibpod'
                "400":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Remove one or more images from the storage.
            tags:
                - images
    /libpod/images/scp/{name}:
        post:
            description: Copy an image from one host to another
            operationId: ImageScpLibpod
            parameters:
                - description: source connection/image
                  in: path
                  name: name
                  required: true
                  type: string
                - description: dest connection/image
                  in: query
                  name: destination
                  type: string
                - default: false
                  description: quiet output
                  in: query
                  name: quiet
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/imagesScpResponseLibpod'
                "400":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Copy an image from one host to another
            tags:
                - images
    /libpod/images/search:
        get:
            description: Search registries for images
            operationId: ImageSearchLibpod
            parameters:
                - description: term to search
                  in: query
                  name: term
                  type: string
                - default: 25
                  description: maximum number of results
                  in: query
                  name: limit
                  type: integer
                - description: |
                    JSON-encoded string containing filters as a `map[string][]string` to process on the images list. Available filters:
                    - `is-automated=(true|false)`
                    - `is-official=(true|false)`
                    - `stars=<number>` Matches images that have at least 'number' stars.
                  in: query
                  name: filters
                  type: string
                - default: true
                  description: Require HTTPS and verify signatures when contacting registries.
                  in: query
                  name: tlsVerify
                  type: boolean
                - default: false
                  description: list the available tags in the repository
                  in: query
                  name: listTags
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/registrySearchResponse'
                "500":
                    $ref: '#/responses/internalError'
            summary: Search images
            tags:
                - images
    /libpod/info:
        get:
            description: Returns information on the system and libpod configuration
            operationId: SystemInfoLibpod
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/infoResponse'
                "500":
                    $ref: '#/responses/internalError'
            summary: Get info
            tags:
                - system
    /libpod/kube/apply:
        post:
            description: Deploy a podman container, pod, volume, or Kubernetes yaml to a Kubernetes cluster.
            operationId: KubeApplyLibpod
            parameters:
                - description: Path to the CA cert file for the Kubernetes cluster.
                  in: query
                  name: caCertFile
                  type: string
                - description: Path to the kubeconfig file for the Kubernetes cluster.
                  in: query
                  name: kubeConfig
                  type: string
                - description: The namespace to deploy the workload to on the Kubernetes cluster.
                  in: query
                  name: namespace
                  type: string
                - description: Create a service object for the container being deployed.
                  in: query
                  name: service
                  type: boolean
                - description: Path to the Kubernetes yaml file to deploy.
                  in: query
                  name: file
                  type: string
                - description: Kubernetes YAML file.
                  in: body
                  name: request
                  schema:
                    type: string
            produces:
                - application/json
            responses:
                "200":
                    description: Kubernetes YAML file successfully deployed to cluster
                    schema:
                        format: binary
                        type: string
                "500":
                    $ref: '#/responses/internalError'
            summary: Apply a podman workload or Kubernetes YAML file.
            tags:
                - containers
                - pods
    /libpod/local/build:
        post:
            description: Build an image from a local build context directory without requiring tar archive upload. The build context must already exist on the server filesystem.
            operationId: LocalBuildLibpod
            parameters:
                - in: header
                  name: X-Registry-Config
                  type: string
                - description: |
                    Absolute path to the build context directory on the server filesystem.
                    This directory must contain all files needed for the build.
                  in: query
                  name: localcontextdir
                  required: true
                  type: string
                - default: Dockerfile
                  description: |
                    Absolute path within the build context to the `Dockerfile`.
                    This is ignored if remote is specified and points to an external `Dockerfile`.
                  in: query
                  name: dockerfile
                  type: string
                - default: latest
                  description: A name and optional tag to apply to the image in the `name:tag` format.  If you omit the tag, the default latest value is assumed. You can provide several t parameters.
                  in: query
                  name: t
                  type: string
                - default: false
                  description: |
                    Instead of building for a set of platforms specified using the platform option, inspect the build's base images,
                    and build for all of the platforms that are available.  Stages that use *scratch* as a starting point can not be inspected,
                    so at least one non-*scratch* stage must be present for detection to work usefully.
                  in: query
                  name: allplatforms
                  type: boolean
                - default: []
                  description: |
                    Additional build contexts for builds that require more than one context.
                    Each additional context must be specified as a key-value pair in the format "name=value".

                    The value can be specified in three formats:
                    - URL context: Use the prefix "url:" followed by a URL to a tar archive
                      Example: "mycontext=url:https://example.com/context.tar"
                    - Image context: Use the prefix "image:" followed by an image reference
                      Example: "mycontext=image:alpine:latest" or "mycontext=image:docker.io/library/ubuntu:22.04"
                    - Local path context: Use the prefix "localpath:" followed by an absolute path on the server filesystem
                      Example: "mycontext=localpath:/path/to/context/dir"

                    (As of version 5.6.0)
                  in: query
                  items:
                    type: string
                  name: additionalbuildcontexts
                  type: array
                - description: |
                    TBD Extra hosts to add to /etc/hosts
                    (As of version 1.xx)
                  in: query
                  name: extrahosts
                  type: string
                - description: |
                    Not to create /etc/hosts when building the image
                  in: query
                  name: nohosts
                  type: boolean
                - description: |
                    A Git repository URI or HTTP/HTTPS context URI.
                    If the URI points to a single text file, the file's contents are placed
                    into a file called Dockerfile and the image is built from that file. If
                    the URI points to a tarball, the file is downloaded by the daemon and the
                    contents therein used as the context for the build. If the URI points to a
                    tarball and the dockerfile parameter is also specified, there must be a file
                    with the corresponding path inside the tarball.
                    (As of version 1.xx)
                  in: query
                  name: remote
                  type: string
                - default: false
                  description: |
                    Suppress verbose build output
                  in: query
                  name: q
                  type: boolean
                - default: false
                  description: |
                    Contents of volume locations to be modified on ADD or COPY only
                    (As of Podman version v5.2)
                  in: query
                  name: compatvolumes
                  type: boolean
                - default: true
                  description: |
                    Add an "org.opencontainers.image.created" annotation to the
                    image.
                    (As of Podman version v5.6)
                  in: query
                  name: createdannotation
                  type: boolean
                - description: |
                    Timestamp to use for newly-added history entries and the image's
                    creation date.
                    (As of Podman version v5.6)
                  in: query
                  name: sourcedateepoch
                  type: number
                - default: false
                  description: |
                    If sourcedateepoch is set, force new content added in layers to
                    have timestamps no later than the sourcedateepoch date.
                    (As of Podman version v5.6)
                  in: query
                  name: rewritetimestamp
                  type: boolean
                - description: |
                    Timestamp to use for newly-added history entries, the image's
                    creation date, and for new content added in layers.
                  in: query
                  name: timestamp
                  type: number
                - default: true
                  description: |
                    Inherit the labels from the base image or base stages
                    (As of Podman version v5.5)
                  in: query
                  name: inheritlabels
                  type: boolean
                - default: true
                  description: |
                    Inherit the annotations from the base image or base stages
                    (As of Podman version v5.6)
                  in: query
                  name: inheritannotations
                  type: boolean
                - default: false
                  description: |
                    Do not use the cache when building the image
                    (As of version 1.xx)
                  in: query
                  name: nocache
                  type: boolean
                - description: |
                    JSON array of images used to build cache resolution
                    (As of version 1.xx)
                  in: query
                  name: cachefrom
                  type: string
                - default: false
                  description: |
                    Attempt to pull the image even if an older image exists locally
                    (As of version 1.xx)
                  in: query
                  name: pull
                  type: boolean
                - default: true
                  description: |
                    Remove intermediate containers after a successful build
                    (As of version 1.xx)
                  in: query
                  name: rm
                  type: boolean
                - default: false
                  description: |
                    Always remove intermediate containers, even upon failure
                    (As of version 1.xx)
                  in: query
                  name: forcerm
                  type: boolean
                - description: |
                    Memory is the upper limit (in bytes) on how much memory running containers can use
                    (As of version 1.xx)
                  in: query
                  name: memory
                  type: integer
                - description: |
                    MemorySwap limits the amount of memory and swap together
                    (As of version 1.xx)
                  in: query
                  name: memswap
                  type: integer
                - description: |
                    CPUShares (relative weight
                    (As of version 1.xx)
                  in: query
                  name: cpushares
                  type: integer
                - description: |
                    CPUSetCPUs in which to allow execution (0-3, 0,1)
                    (As of version 1.xx)
                  in: query
                  name: cpusetcpus
                  type: string
                - description: |
                    CPUPeriod limits the CPU CFS (Completely Fair Scheduler) period
                    (As of version 1.xx)
                  in: query
                  name: cpuperiod
                  type: integer
                - description: |
                    CPUQuota limits the CPU CFS (Completely Fair Scheduler) quota
                    (As of version 1.xx)
                  in: query
                  name: cpuquota
                  type: integer
                - description: |
                    JSON map of string pairs denoting build-time variables.
                    For example, the build argument `Foo` with the value of `bar` would be encoded in JSON as `["Foo":"bar"]`.

                    For example, buildargs={"Foo":"bar"}.

                    Note(s):
                    * This should not be used to pass secrets.
                    * The value of buildargs should be URI component encoded before being passed to the API.

                    (As of version 1.xx)
                  in: query
                  name: buildargs
                  type: string
                - default: 67108864
                  description: |
                    ShmSize is the "size" value to use when mounting an shmfs on the container's /dev/shm directory.
                    Default is 64MB
                    (As of version 1.xx)
                  in: query
                  name: shmsize
                  type: integer
                - default: false
                  description: |
                    Silently ignored.
                    Squash the resulting images layers into a single layer
                    (As of version 1.xx)
                  in: query
                  name: squash
                  type: boolean
                - description: |
                    JSON map of key, value pairs to set as labels on the new image
                    (As of version 1.xx)
                  in: query
                  name: labels
                  type: string
                - description: Add an intermediate image *label* (e.g. label=*value*) to the intermediate image metadata.
                  in: query
                  items:
                    type: string
                  name: layerLabel
                  type: array
                - default: true
                  description: |
                    Cache intermediate layers during build.
                    (As of version 1.xx)
                  in: query
                  name: layers
                  type: boolean
                - default: bridge
                  description: |
                    Sets the networking mode for the run commands during build.
                    Supported standard values are:
                      * `bridge` limited to containers within a single host, port mapping required for external access
                      * `host` no isolation between host and containers on this network
                      * `none` disable all networking for this container
                      * container:<nameOrID> share networking with given container
                      ---All other values are assumed to be a custom network's name
                    (As of version 1.xx)
                  in: query
                  name: networkmode
                  type: string
                - description: |
                    Platform format os[/arch[/variant]]
                    (As of version 1.xx)
                  in: query
                  name: platform
                  type: string
                - description: |
                    Target build stage
                    (As of version 1.xx)
                  in: query
                  name: target
                  type: string
                - description: |
                    output configuration TBD
                    (As of version 1.xx)
                  in: query
                  name: outputs
                  type: string
                - description: |
                    Inject http proxy environment variables into container
                    (As of version 2.0.0)
                  in: query
                  name: httpproxy
                  type: boolean
                - description: Unset environment variables from the final image.
                  in: query
                  items:
                    type: string
                  name: unsetenv
                  type: array
                - description: Unset the image label, causing the label not to be inherited from the base image.
                  in: query
                  items:
                    type: string
                  name: unsetlabel
                  type: array
                - description: |
                    Unset the image annotation, causing the annotation not to be inherited from the base image.
                    (As of Podman version v5.6)
                  in: query
                  items:
                    type: string
                  name: unsetannotation
                  type: array
                - description: Extra volumes that should be mounted in the build container.
                  in: query
                  items:
                    type: string
                  name: volume
                  type: array
                - description: |
                    Add the image to the specified manifest list. Creates a manifest list if it does not exist.
                  in: query
                  name: manifest
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    description: OK (As of version 1.xx)
                    schema:
                        properties:
                            stream:
                                description: output from build process
                                example: |
                                    (build details...)
                                type: string
                        required:
                            - stream
                        type: object
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/fileNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Create image from local build context
            tags:
                - images
    /libpod/local/images/load:
        post:
            description: Load an image (oci-archive or docker-archive) from a file path accessible on the server.
            operationId: LocalImagesLibpod
            parameters:
                - description: Absolute path to the image archive file on the server filesystem
                  in: query
                  name: path
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/imagesLoadResponseLibpod'
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/imageNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Load image from local path
            tags:
                - images
    /libpod/manifests/{name}:
        delete:
            description: |
                Delete named manifest list

                As of v4.0.0
            operationId: ManifestDeleteLibpod
            parameters:
                - description: The name or ID of the  list to be deleted
                  in: path
                  name: name
                  required: true
                  type: string
                - description: Ignore if a specified manifest does not exist and do not throw an error.
                  in: query
                  name: ignore
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/imagesRemoveResponseLibpod'
                "404":
                    $ref: '#/responses/manifestNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Delete manifest list
            tags:
                - manifests
        post:
            description: Create a manifest list
            operationId: ManifestCreateLibpod
            parameters:
                - description: manifest list or index name to create
                  in: path
                  name: name
                  required: true
                  type: string
                - description: |
                    One or more names of an image or a manifest list. Repeat parameter as needed.

                    Support for multiple images, as of version 4.0.0
                    Alias of `image` is support for compatibility with < 4.0.0
                    Response status code is 200 with < 4.0.0 for compatibility
                  in: query
                  name: images
                  required: true
                  type: string
                - description: add all contents if given list
                  in: query
                  name: all
                  type: boolean
                - description: modify an existing list if one with the desired name already exists
                  in: query
                  name: amend
                  type: boolean
                - description: options for new manifest
                  in: body
                  name: options
                  schema:
                    $ref: '#/definitions/ManifestModifyOptions'
            produces:
                - application/json
            responses:
                "201":
                    description: ""
                    schema:
                        $ref: '#/definitions/IDResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/imageNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Create
            tags:
                - manifests
        put:
            description: |
                Add/Remove an image(s) to a manifest list

                Note: operations are not atomic when multiple Images are provided.

                As of v4.0.0
            operationId: ManifestModifyLibpod
            parameters:
                - description: the name or ID of the manifest
                  in: path
                  name: name
                  required: true
                  type: string
                - default: true
                  description: Require HTTPS and verify signatures when contacting registries.
                  in: query
                  name: tlsVerify
                  type: boolean
                - description: options for mutating a manifest
                  in: body
                  name: options
                  required: true
                  schema:
                    $ref: '#/definitions/ManifestModifyOptions'
            produces:
                - application/json
            responses:
                "200":
                    description: ""
                    schema:
                        $ref: '#/definitions/ManifestModifyReport'
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/manifestNotFound'
                "409":
                    description: Operation had partial success, both Images and Errors may have members
                    schema:
                        $ref: '#/definitions/ManifestModifyReport'
                "500":
                    $ref: '#/responses/internalError'
            summary: Modify manifest list
            tags:
                - manifests
    /libpod/manifests/{name}/add:
        post:
            description: |
                Add an image to a manifest list

                Deprecated: As of 4.0.0 use ManifestModifyLibpod instead
            operationId: ManifestAddLibpod
            parameters:
                - description: the name or ID of the manifest
                  in: path
                  name: name
                  required: true
                  type: string
                - description: options for creating a manifest
                  in: body
                  name: options
                  schema:
                    $ref: '#/definitions/ManifestAddOptions'
            produces:
                - application/json
            responses:
                "200":
                    description: ""
                    schema:
                        $ref: '#/definitions/IDResponse'
                "404":
                    $ref: '#/responses/manifestNotFound'
                "409":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Add image
            tags:
                - manifests
    /libpod/manifests/{name}/exists:
        get:
            description: |
                Check if manifest list exists

                Note: There is no contract that the manifest list will exist for a follow-on operation
            operationId: ManifestExistsLibpod
            parameters:
                - description: the name or ID of the manifest list
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: manifest list exists
                "404":
                    $ref: '#/responses/manifestNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Exists
            tags:
                - manifests
    /libpod/manifests/{name}/json:
        get:
            description: Display attributes of given manifest list
            operationId: ManifestInspectLibpod
            parameters:
                - description: the name or ID of the manifest list
                  in: path
                  name: name
                  required: true
                  type: string
                - default: true
                  description: Require HTTPS and verify signatures when contacting registries.
                  in: query
                  name: tlsVerify
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/manifestInspect'
                "404":
                    $ref: '#/responses/manifestNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Inspect
            tags:
                - manifests
    /libpod/manifests/{name}/push:
        post:
            description: |
                Push a manifest list or image index to a registry

                Deprecated: As of 4.0.0 use ManifestPushLibpod instead
            operationId: ManifestPushV3Libpod
            parameters:
                - description: the name or ID of the manifest
                  in: path
                  name: name
                  required: true
                  type: string
                - description: the destination for the manifest
                  in: query
                  name: destination
                  required: true
                  type: string
                - description: push all images
                  in: query
                  name: all
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    description: ""
                    schema:
                        $ref: '#/definitions/IDResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/manifestNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Push manifest to registry
            tags:
                - manifests
    /libpod/manifests/{name}/registry/{destination}:
        post:
            description: |
                Push a manifest list or image index to the named registry

                As of v4.0.0
            operationId: ManifestPushLibpod
            parameters:
                - description: the name or ID of the manifest list
                  in: path
                  name: name
                  required: true
                  type: string
                - description: add existing instances with requested compression algorithms to manifest list
                  in: query
                  items:
                    type: string
                  name: addCompression
                  type: array
                - default: false
                  description: Enforce compressing the layers with the specified --compression and do not reuse differently compressed blobs on the registry.
                  in: query
                  name: forceCompressionFormat
                  type: boolean
                - description: the registry for the manifest list
                  in: path
                  name: destination
                  required: true
                  type: string
                - default: true
                  description: push all images
                  in: query
                  name: all
                  type: boolean
                - default: true
                  description: Require HTTPS and verify signatures when contacting registries.
                  in: query
                  name: tlsVerify
                  type: boolean
                - default: true
                  description: silences extra stream data on push
                  in: query
                  name: quiet
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    description: ""
                    schema:
                        $ref: '#/definitions/IDResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/manifestNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Push manifest list to registry
            tags:
                - manifests
    /libpod/networks/{name}:
        delete:
            description: Remove a configured network
            operationId: NetworkDeleteLibpod
            parameters:
                - description: the name of the network
                  in: path
                  name: name
                  required: true
                  type: string
                - description: remove containers associated with network
                  in: query
                  name: force
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/networkRmResponse'
                "404":
                    $ref: '#/responses/networkNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Remove a network
            tags:
                - networks
    /libpod/networks/{name}/connect:
        post:
            description: Connect a container to a network.
            operationId: NetworkConnectLibpod
            parameters:
                - description: the name of the network
                  in: path
                  name: name
                  required: true
                  type: string
                - description: attributes for connecting a container to a network
                  in: body
                  name: create
                  schema:
                    $ref: '#/definitions/networkConnectRequestLibpod'
            produces:
                - application/json
            responses:
                "200":
                    description: OK
                "404":
                    $ref: '#/responses/networkNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Connect container to network
            tags:
                - networks
    /libpod/networks/{name}/disconnect:
        post:
            description: Disconnect a container from a network.
            operationId: NetworkDisconnectLibpod
            parameters:
                - description: the name of the network
                  in: path
                  name: name
                  required: true
                  type: string
                - description: attributes for disconnecting a container from a network
                  in: body
                  name: create
                  schema:
                    $ref: '#/definitions/networkDisconnectRequest'
            produces:
                - application/json
            responses:
                "200":
                    description: OK
                "404":
                    $ref: '#/responses/networkNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Disconnect container from network
            tags:
                - networks
    /libpod/networks/{name}/exists:
        get:
            description: Check if network exists
            operationId: NetworkExistsLibpod
            parameters:
                - description: the name or ID of the network
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: network exists
                "404":
                    $ref: '#/responses/networkNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Network exists
            tags:
                - networks
    /libpod/networks/{name}/json:
        get:
            description: |
                Display configuration for a network.
            operationId: NetworkInspectLibpod
            parameters:
                - description: the name of the network
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/networkInspectResponse'
                "404":
                    $ref: '#/responses/networkNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Inspect a network
            tags:
                - networks
    /libpod/networks/{name}/update:
        post:
            description: Update existing podman network
            operationId: NetworkUpdateLibpod
            parameters:
                - description: the name or ID of the network
                  in: path
                  name: name
                  required: true
                  type: string
                - description: attributes for updating a netavark network
                  in: body
                  name: update
                  schema:
                    $ref: '#/definitions/networkUpdateRequestLibpod'
            produces:
                - application/json
            responses:
                "200":
                    description: OK
                "400":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Update existing podman network
            tags:
                - networks
    /libpod/networks/create:
        post:
            description: Create a new network configuration
            operationId: NetworkCreateLibpod
            parameters:
                - description: attributes for creating a network
                  in: body
                  name: create
                  schema:
                    $ref: '#/definitions/networkCreateLibpod'
                - default: false
                  description: Ignore the request if a network with the same name already exists.
                  in: query
                  name: ignoreIfExists
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/networkCreateResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "409":
                    $ref: '#/responses/conflictError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Create network
            tags:
                - networks
    /libpod/networks/json:
        get:
            description: |
                Display summary of network configurations.
                  - In a 200 response, all of the fields named Bytes are returned as a Base64 encoded string.
            operationId: NetworkListLibpod
            parameters:
                - description: |
                    JSON encoded value of the filters (a `map[string][]string`) to process on the network list. Available filters:
                      - `name=[name]` Matches network name (accepts regex).
                      - `id=[id]` Matches for full or partial ID.
                      - `driver=[driver]` Only bridge is supported.
                      - `label=[key]` or `label=[key=value]` Matches networks based on the presence of a label alone or a label and a value.
                      - `until=[timestamp]` Matches all networks that were created before the given timestamp.
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/networkListLibpod'
                "500":
                    $ref: '#/responses/internalError'
            summary: List networks
            tags:
                - networks
    /libpod/networks/prune:
        post:
            description: Remove networks that do not have containers
            operationId: NetworkPruneLibpod
            parameters:
                - description: |
                    Filters to process on the prune list, encoded as JSON (a `map[string][]string`).
                    Available filters:
                      - `until=<timestamp>` Prune networks created before this timestamp. The `<timestamp>` can be Unix timestamps, date formatted timestamps, or Go duration strings (e.g. `10m`, `1h30m`) computed relative to the daemon machine’s time.
                      - `label` (`label=<key>`, `label=<key>=<value>`, `label!=<key>`, or `label!=<key>=<value>`) Prune networks with (or without, in case `label!=...` is used) the specified labels.
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/networkPruneResponse'
                "500":
                    $ref: '#/responses/internalError'
            summary: Delete unused networks
            tags:
                - networks
    /libpod/play/kube:
        delete:
            description: Tears down pods, secrets, and volumes defined in a YAML file
            operationId: PlayKubeDownLibpod
            parameters:
                - default: false
                  description: Remove volumes.
                  in: query
                  name: force
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/playKubeResponseLibpod'
                "500":
                    $ref: '#/responses/internalError'
            summary: Remove resources created from kube play
            tags:
                - containers
                - pods
        post:
            description: |
                Create and run pods based on a Kubernetes YAML file.

                ### Content-Type

                Then endpoint support two Content-Type
                 - `plain/text` for yaml format
                 - `application/x-tar` for sending context(s) required for building images

                #### Tar format

                The tar format must contain a `play.yaml` file at the root that will be used.
                If the file format requires context to build an image, it uses the image name and
                check for corresponding folder.

                For example, the client sends a tar file with the following structure:

                ```
                └── content.tar
                 ├── play.yaml
                 └── foobar/
                     └── Containerfile
                ```

                The `play.yaml` is the following, the `foobar` image means we are looking for a context with this name.
                ```
                apiVersion: v1
                kind: Pod
                metadata:
                name: demo-build-remote
                spec:
                containers:
                 - name: container
                   image: foobar
                ```
            operationId: PlayKubeLibpod
            parameters:
                - default: plain/text
                  enum:
                    - plain/text
                    - application/x-tar
                  in: header
                  name: Content-Type
                  type: string
                - description: JSON encoded value of annotations (a map[string]string).
                  in: query
                  name: annotations
                  type: string
                - description: Logging driver for the containers in the pod.
                  in: query
                  name: logDriver
                  type: string
                - description: logging driver options
                  in: query
                  items:
                    type: string
                  name: logOptions
                  type: array
                - description: USe the network mode or specify an array of networks.
                  in: query
                  items:
                    type: string
                  name: network
                  type: array
                - default: false
                  description: do not setup /etc/hosts file in container
                  in: query
                  name: noHosts
                  type: boolean
                - default: false
                  description: use annotations that are not truncated to the Kubernetes maximum length of 63 characters
                  in: query
                  name: noTrunc
                  type: boolean
                - description: publish a container's port, or a range of ports, to the host
                  in: query
                  items:
                    type: string
                  name: publishPorts
                  type: array
                - description: Whether to publish all ports defined in the K8S YAML file (containerPort, hostPort), if false only hostPort will be published
                  in: query
                  name: publishAllPorts
                  type: boolean
                - default: false
                  description: replace existing pods and containers
                  in: query
                  name: replace
                  type: boolean
                - default: false
                  description: Starts a service container before all pods.
                  in: query
                  name: serviceContainer
                  type: boolean
                - default: true
                  description: Start the pod after creating it.
                  in: query
                  name: start
                  type: boolean
                - description: Static IPs used for the pods.
                  in: query
                  items:
                    type: string
                  name: staticIPs
                  type: array
                - description: Static MACs used for the pods.
                  in: query
                  items:
                    type: string
                  name: staticMACs
                  type: array
                - default: true
                  description: Require HTTPS and verify signatures when contacting registries.
                  in: query
                  name: tlsVerify
                  type: boolean
                - description: Set the user namespace mode for the pods.
                  in: query
                  name: userns
                  type: string
                - default: false
                  description: Clean up all objects created when a SIGTERM is received or pods exit.
                  in: query
                  name: wait
                  type: boolean
                - description: Build the images with corresponding context.
                  in: query
                  name: build
                  type: boolean
                - description: Kubernetes YAML file.
                  in: body
                  name: request
                  schema:
                    type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/playKubeResponseLibpod'
                "500":
                    $ref: '#/responses/internalError'
            summary: Play a Kubernetes YAML file.
            tags:
                - containers
                - pods
    /libpod/pods/{name}:
        delete:
            operationId: PodDeleteLibpod
            parameters:
                - description: the name or ID of the pod
                  in: path
                  name: name
                  required: true
                  type: string
                - description: force removal of a running pod by first stopping all containers, then removing all containers in the pod
                  in: query
                  name: force
                  type: boolean
                - description: number of seconds to wait before killing containers in pod
                  in: query
                  name: timeout
                  type: integer
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/podRmResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/podNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Remove pod
            tags:
                - pods
    /libpod/pods/{name}/exists:
        get:
            description: Check if a pod exists by name or ID
            operationId: PodExistsLibpod
            parameters:
                - description: the name or ID of the pod
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: pod exists
                "404":
                    $ref: '#/responses/podNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Pod exists
            tags:
                - pods
    /libpod/pods/{name}/json:
        get:
            operationId: PodInspectLibpod
            parameters:
                - description: the name or ID of the pod
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/podInspectResponse'
                "404":
                    $ref: '#/responses/podNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Inspect pod
            tags:
                - pods
    /libpod/pods/{name}/kill:
        post:
            operationId: PodKillLibpod
            parameters:
                - description: the name or ID of the pod
                  in: path
                  name: name
                  required: true
                  type: string
                - default: SIGKILL
                  description: signal to be sent to pod
                  in: query
                  name: signal
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/podKillResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/podNotFound'
                "409":
                    $ref: '#/responses/podKillResponse'
                "500":
                    $ref: '#/responses/internalError'
            summary: Kill a pod
            tags:
                - pods
    /libpod/pods/{name}/pause:
        post:
            description: Pause a pod
            operationId: PodPauseLibpod
            parameters:
                - description: the name or ID of the pod
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/podPauseResponse'
                "404":
                    $ref: '#/responses/podNotFound'
                "409":
                    $ref: '#/responses/podPauseResponse'
                "500":
                    $ref: '#/responses/internalError'
            summary: Pause a pod
            tags:
                - pods
    /libpod/pods/{name}/restart:
        post:
            operationId: PodRestartLibpod
            parameters:
                - description: the name or ID of the pod
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/podRestartResponse'
                "404":
                    $ref: '#/responses/podNotFound'
                "409":
                    $ref: '#/responses/podRestartResponse'
                "500":
                    $ref: '#/responses/internalError'
            summary: Restart a pod
            tags:
                - pods
    /libpod/pods/{name}/start:
        post:
            operationId: PodStartLibpod
            parameters:
                - description: the name or ID of the pod
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/podStartResponse'
                "304":
                    $ref: '#/responses/podAlreadyStartedError'
                "404":
                    $ref: '#/responses/podNotFound'
                "409":
                    $ref: '#/responses/podStartResponse'
                "500":
                    $ref: '#/responses/internalError'
            summary: Start a pod
            tags:
                - pods
    /libpod/pods/{name}/stop:
        post:
            operationId: PodStopLibpod
            parameters:
                - description: the name or ID of the pod
                  in: path
                  name: name
                  required: true
                  type: string
                - description: timeout
                  in: query
                  name: t
                  type: integer
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/podStopResponse'
                "304":
                    $ref: '#/responses/podAlreadyStoppedError'
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/podNotFound'
                "409":
                    $ref: '#/responses/podStopResponse'
                "500":
                    $ref: '#/responses/internalError'
            summary: Stop a pod
            tags:
                - pods
    /libpod/pods/{name}/top:
        get:
            description: List processes running inside a pod
            operationId: PodTopLibpod
            parameters:
                - description: Name of pod to query for processes
                  in: path
                  name: name
                  required: true
                  type: string
                - description: when true, repeatedly stream the latest output (As of version 4.0)
                  in: query
                  name: stream
                  type: boolean
                - default: 5
                  description: if streaming, delay in seconds between updates. Must be >1. (As of version 4.0)
                  in: query
                  name: delay
                  type: integer
                - description: |
                    arguments to pass to ps such as aux.
                  in: query
                  name: ps_args
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/podTopResponse'
                "404":
                    $ref: '#/responses/podNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: List processes
            tags:
                - pods
    /libpod/pods/{name}/unpause:
        post:
            operationId: PodUnpauseLibpod
            parameters:
                - description: the name or ID of the pod
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/podUnpauseResponse'
                "404":
                    $ref: '#/responses/podNotFound'
                "409":
                    $ref: '#/responses/podUnpauseResponse'
                "500":
                    $ref: '#/responses/internalError'
            summary: Unpause a pod
            tags:
                - pods
    /libpod/pods/create:
        post:
            operationId: PodCreateLibpod
            parameters:
                - description: attributes for creating a pod
                  in: body
                  name: create
                  schema:
                    $ref: '#/definitions/PodSpecGenerator'
            produces:
                - application/json
            responses:
                "201":
                    description: ""
                    schema:
                        $ref: '#/definitions/IDResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "409":
                    description: status conflict
                    schema:
                        description: message describing error
                        type: string
                "500":
                    $ref: '#/responses/internalError'
            summary: Create a pod
            tags:
                - pods
    /libpod/pods/json:
        get:
            operationId: PodListLibpod
            parameters:
                - description: |
                    JSON encoded value of the filters (a map[string][]string) to process on the pods list. Available filters:
                      - `id=<pod-id>` Matches all of pod id.
                      - `label=<key>` or `label=<key>:<value>` Matches pods based on the presence of a label alone or a label and a value.
                      - `name=<pod-name>` Matches all of pod name.
                      - `until=<timestamp>` List pods created before this timestamp. The `<timestamp>` can be Unix timestamps, date formatted timestamps, or Go duration strings (e.g. `10m`, `1h30m`) computed relative to the daemon machine’s time.
                      - `status=<pod-status>` Pod's status: `stopped`, `running`, `paused`, `exited`, `dead`, `created`, `degraded`.
                      - `network=<pod-network>` Name or full ID of network.
                      - `ctr-names=<pod-ctr-names>` Container name within the pod.
                      - `ctr-ids=<pod-ctr-ids>` Container ID within the pod.
                      - `ctr-status=<pod-ctr-status>` Container status within the pod.
                      - `ctr-number=<pod-ctr-number>` Number of containers in the pod.
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/podsListResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
            summary: List pods
            tags:
                - pods
    /libpod/pods/prune:
        post:
            operationId: PodPruneLibpod
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/podPruneResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "409":
                    description: pod already exists
                "500":
                    $ref: '#/responses/internalError'
            summary: Prune unused pods
            tags:
                - pods
    /libpod/pods/stats:
        get:
            description: Display a live stream of resource usage statistics for the containers in one or more pods
            operationId: PodStatsAllLibpod
            parameters:
                - description: Provide statistics for all running pods.
                  in: query
                  name: all
                  type: boolean
                - description: Names or IDs of pods.
                  in: query
                  items:
                    type: string
                  name: namesOrIDs
                  type: array
                - default: false
                  description: Stream the output
                  in: query
                  name: stream
                  type: boolean
                - default: 5
                  description: Time in seconds between stats reports
                  in: query
                  name: delay
                  type: integer
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/podStatsResponse'
                "404":
                    $ref: '#/responses/podNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Statistics for one or more pods
            tags:
                - pods
    /libpod/quadlets:
        delete:
            description: |
                Remove one or more quadlet files. Supports removing specific quadlets by name or all quadlets
                for the current user. Can force removal of running quadlets and control systemd reload behavior.
            operationId: QuadletDeleteAllLibpod
            parameters:
                - description: Names of quadlets to remove (e.g., "myapp.container"). Required unless all=true
                  in: query
                  items:
                    type: string
                  name: quadlets
                  type: array
                - default: false
                  description: Remove all quadlets for the current user
                  in: query
                  name: all
                  type: boolean
                - default: false
                  description: Remove running quadlets by stopping them first
                  in: query
                  name: force
                  type: boolean
                - default: false
                  description: Do not error for quadlets that do not exist
                  in: query
                  name: ignore
                  type: boolean
                - default: true
                  description: Reload systemd after removing quadlets
                  in: query
                  name: reload-systemd
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/quadletRemoveResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Remove quadlet files (batch operation)
            tags:
                - quadlets
        post:
            consumes:
                - application/x-tar
                - multipart/form-data
            description: |
                Install one or more files for a quadlet application. Each request should contain a single quadlet file
                and optionally more files such as containerfile, kube yaml or configuration files. Supports both tar
                archives and multipart form data uploads.
            operationId: QuadletInstallLibpod
            parameters:
                - default: false
                  description: Replace the installation files even if the files already exists
                  in: query
                  name: replace
                  type: boolean
                - default: true
                  description: Reload systemd after installing quadlets
                  in: query
                  name: reload-systemd
                  type: boolean
                - description: |
                    Quadlet files to install. Can be provided as:
                    - application/x-tar: A tar archive containing one quadlet file and optionally additional files
                    - multipart/form-data: One quadlet file as form data and optionally additional files
                  in: body
                  name: request
                  schema:
                    format: binary
                    type: string
            produces:
                - application/json
            responses:
                "200":
                    description: Quadlet installation report
                    schema:
                        properties:
                            InstalledQuadlets:
                                additionalProperties:
                                    type: string
                                description: Map of source path to installed path for successfully installed quadlets
                                type: object
                            QuadletErrors:
                                additionalProperties:
                                    type: string
                                description: Map of source path to error message for failed installations
                                type: object
                        type: object
                "400":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Install quadlet files
            tags:
                - quadlets
    /libpod/quadlets/{name}:
        delete:
            description: |
                Remove a quadlet file by name. Can force removal of running quadlets and control systemd reload behavior.
            operationId: QuadletDeleteLibpod
            parameters:
                - description: the name of the quadlet with extension (e.g., "myapp.container")
                  in: path
                  name: name
                  required: true
                  type: string
                - default: false
                  description: Remove running quadlet by stopping it first
                  in: query
                  name: force
                  type: boolean
                - default: false
                  description: Do not error if the quadlet does not exist
                  in: query
                  name: ignore
                  type: boolean
                - default: true
                  description: Reload systemd after removing the quadlet
                  in: query
                  name: reload-systemd
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/quadletRemoveResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "404":
                    $ref: '#/responses/quadletNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Remove a quadlet file
            tags:
                - quadlets
    /libpod/quadlets/{name}/exists:
        get:
            description: Check if a quadlet exists by name
            operationId: QuadletExistsLibpod
            parameters:
                - description: the name of the quadlet with extension (e.g., "myapp.container")
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: quadlet exists
                "404":
                    $ref: '#/responses/quadletNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Check if quadlet exists
            tags:
                - quadlets
    /libpod/quadlets/{name}/file:
        get:
            description: Get the contents of a Quadlet, displaying the file including all comments
            operationId: QuadletFileLibpod
            parameters:
                - description: the name of the quadlet with extension (e.g., "myapp.container")
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - text/plain
            responses:
                "200":
                    $ref: '#/responses/quadletFileResponse'
                "404":
                    $ref: '#/responses/quadletNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Get quadlet file
            tags:
                - quadlets
    /libpod/quadlets/json:
        get:
            description: Return a list of all quadlets.
            operationId: QuadletListLibpod
            parameters:
                - description: |
                    JSON encoded value of the filters (a map[string][]string).
                    Supported filters:
                      - name=<quadlet-name> Filter by quadlet name
                      - pod=<pod-quadlet> Filter by Pod= value (container quadlets only)
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/quadletListResponse'
                "500":
                    $ref: '#/responses/internalError'
            summary: List quadlets
            tags:
                - quadlets
    /libpod/secrets/{name}:
        delete:
            operationId: SecretDeleteLibpod
            parameters:
                - description: the name or ID of the secret
                  in: path
                  name: name
                  required: true
                  type: string
                - default: false
                  description: Remove all secrets
                  in: query
                  name: all
                  type: boolean
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "404":
                    $ref: '#/responses/NoSuchSecret'
                "500":
                    $ref: '#/responses/internalError'
            summary: Remove secret
            tags:
                - secrets
    /libpod/secrets/{name}/exists:
        get:
            operationId: SecretExistsLibpod
            parameters:
                - description: the name or ID of the secret
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: secret exists
                "404":
                    $ref: '#/responses/NoSuchSecret'
                "500":
                    $ref: '#/responses/internalError'
            summary: Secret exists
            tags:
                - secrets
    /libpod/secrets/{name}/json:
        get:
            operationId: SecretInspectLibpod
            parameters:
                - description: the name or ID of the secret
                  in: path
                  name: name
                  required: true
                  type: string
                - default: false
                  description: Display Secret
                  in: query
                  name: showsecret
                  type: boolean
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/SecretInspectResponse'
                "404":
                    $ref: '#/responses/NoSuchSecret'
                "500":
                    $ref: '#/responses/internalError'
            summary: Inspect secret
            tags:
                - secrets
    /libpod/secrets/create:
        post:
            operationId: SecretCreateLibpod
            parameters:
                - description: User-defined name of the secret.
                  in: query
                  name: name
                  required: true
                  type: string
                - default: file
                  description: Secret driver
                  in: query
                  name: driver
                  type: string
                - description: JSON-encoded string containing secret driver options as a `map[string]string`.
                  in: query
                  name: driveropts
                  type: string
                - description: JSON-encoded string containing labels as a `map[string]string`.
                  in: query
                  name: labels
                  type: string
                - default: false
                  description: Replace an existing secret with the same name.
                  in: query
                  name: replace
                  type: boolean
                - default: false
                  description: Ignore the request if a secret with the same name already exists.
                  in: query
                  name: ignore
                  type: boolean
                - description: Secret
                  in: body
                  name: request
                  schema:
                    type: string
            produces:
                - application/json
            responses:
                "201":
                    $ref: '#/responses/SecretCreateResponse'
                "500":
                    $ref: '#/responses/internalError'
            summary: Create a secret
            tags:
                - secrets
    /libpod/secrets/json:
        get:
            description: Returns a list of secrets
            operationId: SecretListLibpod
            parameters:
                - description: |
                    JSON encoded value of the filters (a `map[string][]string`) to process on the secrets list. Currently available filters:
                      - `name=[name]` Matches secrets name (accepts regex).
                      - `id=[id]` Matches for full or partial ID.
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/SecretListResponse'
                "500":
                    $ref: '#/responses/internalError'
            summary: List secrets
            tags:
                - secrets
    /libpod/system/check:
        post:
            operationId: SystemCheckLibpod
            parameters:
                - description: Skip time-consuming checks
                  in: query
                  name: quick
                  type: boolean
                - description: Remove inconsistent images
                  in: query
                  name: repair
                  type: boolean
                - description: Remove inconsistent containers and images
                  in: query
                  name: repair_lossy
                  type: boolean
                - default: 24h0m0s
                  description: Maximum allowed age of unreferenced layers
                  in: query
                  name: unreferenced_layer_max_age
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/systemCheckResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Performs consistency checks on storage, optionally removing items which fail checks
            tags:
                - system
    /libpod/system/df:
        get:
            description: Return information about disk usage for containers, images, and volumes
            operationId: SystemDataUsageLibpod
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/systemDiskUsage'
                "500":
                    $ref: '#/responses/internalError'
            summary: Show disk usage
            tags:
                - system
    /libpod/system/prune:
        post:
            operationId: SystemPruneLibpod
            parameters:
                - description: Remove all unused data, not just dangling data
                  in: query
                  name: all
                  type: boolean
                - description: Prune volumes
                  in: query
                  name: volumes
                  type: boolean
                - description: Remove images used by external containers (e.g., build containers)
                  in: query
                  name: external
                  type: boolean
                - description: Remove build cache
                  in: query
                  name: build
                  type: boolean
                - description: |
                    JSON encoded value of filters (a map[string][]string) to match data against before pruning.
                    Available filters:
                      - `until=<timestamp>` Prune data created before this timestamp. The `<timestamp>` can be Unix timestamps, date formatted timestamps, or Go duration strings (e.g. `10m`, `1h30m`) computed relative to the daemon machine's time.
                      - `label` (`label=<key>`, `label=<key>=<value>`, `label!=<key>`, or `label!=<key>=<value>`) Prune data with (or without, in case `label!=...` is used) the specified labels.
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/systemPruneResponse'
                "400":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Prune unused data
            tags:
                - system
    /libpod/version:
        get:
            operationId: SystemVersionLibpod
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/versionResponse'
            summary: Component Version information
            tags:
                - system
    /libpod/volumes/{name}:
        delete:
            operationId: VolumeDeleteLibpod
            parameters:
                - description: the name or ID of the volume
                  in: path
                  name: name
                  required: true
                  type: string
                - description: force removal
                  in: query
                  name: force
                  type: boolean
                - description: timeout before forcibly killing any containers using the volume
                  in: query
                  name: timeout
                  type: integer
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "404":
                    $ref: '#/responses/volumeNotFound'
                "409":
                    description: Volume is in use and cannot be removed
                "500":
                    $ref: '#/responses/internalError'
            summary: Remove volume
            tags:
                - volumes
    /libpod/volumes/{name}/exists:
        get:
            description: Check if a volume exists
            operationId: VolumeExistsLibpod
            parameters:
                - description: the name of the volume
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: volume exists
                "404":
                    $ref: '#/responses/volumeNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Volume exists
            tags:
                - volumes
    /libpod/volumes/{name}/export:
        get:
            operationId: VolumeExportLibpod
            parameters:
                - description: the name or ID of the volume
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/x-tar
            responses:
                "200":
                    description: no error
                    schema:
                        format: binary
                        type: string
                "404":
                    $ref: '#/responses/volumeNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Export a volume
            tags:
                - volumes
    /libpod/volumes/{name}/import:
        post:
            operationId: VolumeImportLibpod
            parameters:
                - description: the name or ID of the volume
                  in: path
                  name: name
                  required: true
                  type: string
                - description: |
                    An uncompressed tar archive
                  in: body
                  name: inputStream
                  schema:
                    format: binary
                    type: string
            produces:
                - application/json
            responses:
                "204":
                    description: Successful import
                "404":
                    $ref: '#/responses/volumeNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Populate a volume by importing provided tar
            tags:
                - volumes
    /libpod/volumes/{name}/json:
        get:
            operationId: VolumeInspectLibpod
            parameters:
                - description: the name or ID of the volume
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/volumeCreateResponse'
                "404":
                    $ref: '#/responses/volumeNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Inspect volume
            tags:
                - volumes
    /libpod/volumes/create:
        post:
            operationId: VolumeCreateLibpod
            parameters:
                - description: attributes for creating a volume
                  in: body
                  name: create
                  schema:
                    $ref: '#/definitions/VolumeCreateOptions'
            produces:
                - application/json
            responses:
                "201":
                    $ref: '#/responses/volumeCreateResponse'
                "500":
                    $ref: '#/responses/internalError'
            summary: Create a volume
            tags:
                - volumes
    /libpod/volumes/json:
        get:
            description: Returns a list of volumes
            operationId: VolumeListLibpod
            parameters:
                - description: |
                    JSON encoded value of the filters (a map[string][]string) to process on the volumes list. Available filters:
                      - driver=<volume-driver-name> Matches volumes based on their driver.
                      - label=<key> or label=<key>:<value> Matches volumes based on the presence of a label alone or a label and a value.
                      - name=<volume-name> Matches all of volume name.
                      - opt=<driver-option> Matches a storage driver options
                      - `until=<timestamp>` List volumes created before this timestamp. The `<timestamp>` can be Unix timestamps, date formatted timestamps, or Go duration strings (e.g. `10m`, `1h30m`) computed relative to the daemon machine’s time.
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/volumeListLibpod'
                "500":
                    $ref: '#/responses/internalError'
            summary: List volumes
            tags:
                - volumes
    /libpod/volumes/prune:
        post:
            operationId: VolumePruneLibpod
            parameters:
                - description: |
                    JSON encoded value of filters (a map[string][]string) to match volumes against before pruning.
                    Available filters:
                      - `all` When true, prune all unused volumes; when false or unset, only anonymous unused volumes.
                      - `anonymous` When true/false, restrict to anonymous or named volumes only.
                      - `until=<timestamp>` Prune volumes created before this timestamp. The `<timestamp>` can be Unix timestamps, date formatted timestamps, or Go duration strings (e.g. `10m`, `1h30m`) computed relative to the daemon machine’s time.
                      - `label` (`label=<key>`, `label=<key>=<value>`, `label!=<key>`, or `label!=<key>=<value>`) Prune volumes with (or without, in case `label!=...` is used) the specified labels.
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/volumePruneLibpod'
                "500":
                    $ref: '#/responses/internalError'
            summary: Prune volumes
            tags:
                - volumes
    /networks:
        get:
            description: Display summary of network configurations
            operationId: NetworkList
            parameters:
                - description: |
                    JSON encoded value of the filters (a `map[string][]string`) to process on the network list. Currently available filters:
                      - `name=[name]` Matches network name (accepts regex).
                      - `id=[id]` Matches for full or partial ID.
                      - `driver=[driver]` Only bridge is supported.
                      - `label=[key]` or `label=[key=value]` Matches networks based on the presence of a label alone or a label and a value.
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/networkListCompat'
                "500":
                    $ref: '#/responses/internalError'
            summary: List networks
            tags:
                - networks (compat)
    /networks/{name}:
        delete:
            description: Remove a network
            operationId: NetworkDelete
            parameters:
                - description: the name of the network
                  in: path
                  name: name
                  required: true
                  type: string
                - default: false
                  description: Remove containers associated with the network.
                  in: query
                  name: force
                  type: boolean
                - description: Seconds to wait for container removal when force is set.
                  in: query
                  name: timeout
                  type: integer
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "404":
                    $ref: '#/responses/networkNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Remove a network
            tags:
                - networks (compat)
        get:
            description: Display low level configuration network
            operationId: NetworkInspect
            parameters:
                - description: the name of the network
                  in: path
                  name: name
                  required: true
                  type: string
                - description: Detailed inspect output for troubleshooting
                  in: query
                  name: verbose
                  type: boolean
                - description: Filter the network by scope (swarm, global, or local)
                  in: query
                  name: scope
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/networkInspectCompat'
                "404":
                    $ref: '#/responses/networkNotFound'
                "500":
                    $ref: '#/responses/internalError'
            summary: Inspect a network
            tags:
                - networks (compat)
    /networks/{name}/connect:
        post:
            description: Connect a container to a network
            operationId: NetworkConnect
            parameters:
                - description: the name of the network
                  in: path
                  name: name
                  required: true
                  type: string
                - description: attributes for connecting a container to a network
                  in: body
                  name: create
                  schema:
                    $ref: '#/definitions/networkConnectRequest'
            produces:
                - application/json
            responses:
                "200":
                    description: OK
                "400":
                    $ref: '#/responses/badParamError'
                "403":
                    $ref: '#/responses/networkConnectedError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Connect container to network
            tags:
                - networks (compat)
    /networks/{name}/disconnect:
        post:
            description: Disconnect a container from a network
            operationId: NetworkDisconnect
            parameters:
                - description: the name of the network
                  in: path
                  name: name
                  required: true
                  type: string
                - description: attributes for disconnecting a container from a network
                  in: body
                  name: create
                  schema:
                    $ref: '#/definitions/networkDisconnectRequest'
            produces:
                - application/json
            responses:
                "200":
                    description: OK
                "400":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Disconnect container from network
            tags:
                - networks (compat)
    /networks/create:
        post:
            description: Create a network configuration
            operationId: NetworkCreate
            parameters:
                - description: attributes for creating a network
                  in: body
                  name: create
                  schema:
                    $ref: '#/definitions/networkCreate'
            produces:
                - application/json
            responses:
                "201":
                    description: network created
                    schema:
                        properties:
                            Id:
                                type: string
                            Warning:
                                type: string
                        type: object
                "400":
                    $ref: '#/responses/badParamError'
                "500":
                    $ref: '#/responses/internalError'
            summary: Create network
            tags:
                - networks (compat)
    /networks/prune:
        post:
            description: Remove networks that do not have containers
            operationId: NetworkPrune
            parameters:
                - description: |
                    Filters to process on the prune list, encoded as JSON (a map[string][]string).
                    Available filters:
                      - `until=<timestamp>` Prune networks created before this timestamp. The <timestamp> can be Unix timestamps, date formatted timestamps, or Go duration strings (e.g. `10m`, `1h30m`) computed relative to the daemon machine’s time.
                      - `label` (`label=<key>`, `label=<key>=<value>`, `label!=<key>`, or `label!=<key>=<value>`) Prune networks with (or without, in case `label!=...` is used) the specified labels.
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    description: OK
                    schema:
                        properties:
                            NetworksDeleted:
                                items:
                                    type: string
                                type: array
                        type: object
                "500":
                    $ref: '#/responses/internalError'
            summary: Delete unused networks
            tags:
                - networks (compat)
    /secrets:
        get:
            description: Returns a list of secrets
            operationId: SecretList
            parameters:
                - description: |
                    JSON encoded value of the filters (a `map[string][]string`) to process on the secrets list. Currently available filters:
                      - `name=[name]` Matches secrets name (accepts regex).
                      - `id=[id]` Matches for full or partial ID.
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/SecretListCompatResponse'
                "500":
                    $ref: '#/responses/internalError'
            summary: List secrets
            tags:
                - secrets (compat)
    /secrets/{name}:
        delete:
            operationId: SecretDelete
            parameters:
                - description: the name or ID of the secret
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "404":
                    $ref: '#/responses/NoSuchSecret'
                "500":
                    $ref: '#/responses/internalError'
            summary: Remove secret
            tags:
                - secrets (compat)
        get:
            operationId: SecretInspect
            parameters:
                - description: the name or ID of the secret
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/SecretInspectCompatResponse'
                "404":
                    $ref: '#/responses/NoSuchSecret'
                "500":
                    $ref: '#/responses/internalError'
            summary: Inspect secret
            tags:
                - secrets (compat)
    /secrets/create:
        post:
            operationId: SecretCreate
            parameters:
                - description: |
                    attributes for creating a secret
                  in: body
                  name: create
                  schema:
                    $ref: '#/definitions/SecretCreate'
            produces:
                - application/json
            responses:
                "201":
                    $ref: '#/responses/SecretCreateResponse'
                "409":
                    $ref: '#/responses/SecretInUse'
                "500":
                    $ref: '#/responses/internalError'
            summary: Create a secret
            tags:
                - secrets (compat)
    /system/df:
        get:
            description: Return information about disk usage for containers, images, and volumes
            operationId: SystemDataUsage
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/systemDiskUsage'
                "500":
                    $ref: '#/responses/internalError'
            summary: Show disk usage
            tags:
                - system (compat)
    /version:
        get:
            operationId: SystemVersion
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/versionResponse'
            summary: Component Version information
            tags:
                - system (compat)
    /volumes:
        get:
            description: Returns a list of volume
            operationId: VolumeList
            parameters:
                - description: |
                    JSON encoded value of the filters (a map[string][]string) to process on the volumes list. Available filters:
                      - driver=<volume-driver-name> Matches volumes based on their driver.
                      - label=<key> or label=<key>:<value> Matches volumes based on the presence of a label alone or a label and a value.
                      - name=<volume-name> Matches all of volume name.
                      - `until=<timestamp>` List volumes created before this timestamp. The `<timestamp>` can be Unix timestamps, date formatted timestamps, or Go duration strings (e.g. `10m`, `1h30m`) computed relative to the daemon machine’s time.

                    Note:
                      The boolean `dangling` filter is not yet implemented for this endpoint.
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/volumeList'
                "500":
                    $ref: '#/responses/internalError'
            summary: List volumes
            tags:
                - volumes (compat)
    /volumes/{name}:
        delete:
            operationId: VolumeDelete
            parameters:
                - description: the name or ID of the volume
                  in: path
                  name: name
                  required: true
                  type: string
                - description: |
                    Force removal of the volume. This actually only causes errors due
                    to the names volume not being found to be suppressed, which is the
                    behaviour Docker implements.
                  in: query
                  name: force
                  type: boolean
                - description: timeout before forcibly killing any containers using the volume
                  in: query
                  name: timeout
                  type: integer
            produces:
                - application/json
            responses:
                "204":
                    description: no error
                "404":
                    $ref: '#/responses/volumeNotFound'
                "409":
                    description: Volume is in use and cannot be removed
                "500":
                    $ref: '#/responses/internalError'
            summary: Remove volume
            tags:
                - volumes (compat)
        get:
            operationId: VolumeInspect
            parameters:
                - description: the name or ID of the volume
                  in: path
                  name: name
                  required: true
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/volumeInspect'
                "500":
                    $ref: '#/responses/internalError'
            summary: Inspect volume
            tags:
                - volumes (compat)
    /volumes/create:
        post:
            operationId: VolumeCreate
            parameters:
                - description: |
                    attributes for creating a volume.
                    Note: If a volume by the same name exists, a 201 response with that volume's information will be generated.
                  in: body
                  name: create
                  schema:
                    $ref: '#/definitions/volumeCreate'
            produces:
                - application/json
            responses:
                "201":
                    $ref: '#/responses/volumeInspect'
                "500":
                    $ref: '#/responses/internalError'
            summary: Create a volume
            tags:
                - volumes (compat)
    /volumes/prune:
        post:
            operationId: VolumePrune
            parameters:
                - description: |
                    JSON encoded value of filters (a map[string][]string). Docker API 1.42+ - by default only anonymous (unnamed) unused volumes are pruned; use filter all=true to prune all unused volumes.
                    Available filters:
                      - `all` When true, prune all unused volumes (anonymous and named). When false or unset, only anonymous unused volumes are pruned.
                      - `until=<timestamp>` Prune volumes created before this timestamp. The `<timestamp>` can be Unix timestamps, date formatted timestamps, or Go duration strings (e.g. `10m`, `1h30m`) computed relative to the daemon machine’s time.
                      - `label` (`label=<key>`, `label=<key>=<value>`, `label!=<key>`, or `label!=<key>=<value>`) Prune volumes with (or without, in case `label!=...` is used) the specified labels.
                  in: query
                  name: filters
                  type: string
            produces:
                - application/json
            responses:
                "200":
                    $ref: '#/responses/volumePruneResponse'
                "500":
                    $ref: '#/responses/internalError'
            summary: Prune volumes
            tags:
                - volumes (compat)
produces:
    - application/json
    - application/octet-stream
    - text/plain
responses:
    NoSuchSecret:
        description: No such secret
        schema:
            properties:
                cause:
                    description: API root cause formatted for automated parsing
                    example: API root cause
                    type: string
                    x-go-name: Because
                message:
                    description: human error message, formatted for a human to read
                    example: human error message
                    type: string
                    x-go-name: Message
                response:
                    description: HTTP response code
                    format: int64
                    minimum: 400
                    type: integer
                    x-go-name: ResponseCode
            type: object
    SecretCreateResponse:
        description: Secret create response
        schema:
            allOf:
                - $ref: '#/definitions/SecretCreateReport'
    SecretInUse:
        description: Secret in use
        schema:
            properties:
                cause:
                    description: API root cause formatted for automated parsing
                    example: API root cause
                    type: string
                    x-go-name: Because
                message:
                    description: human error message, formatted for a human to read
                    example: human error message
                    type: string
                    x-go-name: Message
                response:
                    description: HTTP response code
                    format: int64
                    minimum: 400
                    type: integer
                    x-go-name: ResponseCode
            type: object
    SecretInspectCompatResponse:
        description: Secret inspect compat
        schema:
            $ref: '#/definitions/SecretInfoReportCompat'
    SecretInspectResponse:
        description: Secret inspect response
        schema:
            $ref: '#/definitions/SecretInfoReport'
    SecretListCompatResponse:
        description: Secret list response
        schema:
            items:
                $ref: '#/definitions/SecretInfoReportCompat'
            type: array
    SecretListResponse:
        description: Secret list response
        schema:
            items:
                $ref: '#/definitions/SecretInfoReport'
            type: array
    artifactAddResponse:
        description: Artifact Add
        schema:
            $ref: '#/definitions/ArtifactAddReport'
    artifactBadAuth:
        description: error in authentication
        schema:
            $ref: '#/definitions/ErrorModel'
    artifactListResponse:
        description: Artifact list
        schema:
            items:
                $ref: '#/definitions/ArtifactListReport'
            type: array
    artifactNotFound:
        description: No such artifact
        schema:
            $ref: '#/definitions/ErrorModel'
    artifactPullResponse:
        description: Artifact Pull
        schema:
            $ref: '#/definitions/ArtifactPullReport'
    artifactPushResponse:
        description: Artifact Push
        schema:
            $ref: '#/definitions/ArtifactPushReport'
    artifactRemoveResponse:
        description: Artifact Remove
        schema:
            $ref: '#/definitions/ArtifactRemoveReport'
    badParamError:
        description: Bad parameter in request
        schema:
            $ref: '#/definitions/ErrorModel'
    conflictError:
        description: Conflict error in operation
        schema:
            $ref: '#/definitions/ErrorModel'
    containerAlreadyStartedError:
        description: Container already started
        schema:
            $ref: '#/definitions/ErrorModel'
    containerAlreadyStoppedError:
        description: Container already stopped
        schema:
            $ref: '#/definitions/ErrorModel'
    containerCreateResponse:
        description: Create container
        schema:
            $ref: '#/definitions/ContainerCreateResponse'
    containerInspectResponse:
        description: Inspect container
        schema:
            $ref: '#/definitions/InspectResponse'
    containerInspectResponseLibpod:
        description: Inspect container
        schema:
            $ref: '#/definitions/InspectContainerData'
    containerNotFound:
        description: No such container
        schema:
            $ref: '#/definitions/ErrorModel'
    containerRemoveLibpod:
        description: Remove Containers
        schema:
            items:
                $ref: '#/definitions/LibpodContainersRmReport'
            type: array
    containerStats:
        description: Get stats for one or more containers
        schema:
            $ref: '#/definitions/ContainerStats'
    containerTopResponse:
        description: List processes in container
        schema:
            $ref: '#/definitions/ContainerTopOKBody'
    containerUpdateResponse:
        description: Update container
        schema:
            properties:
                ID:
                    type: string
            type: object
    containerWaitResponse:
        description: Wait container
        schema:
            properties:
                Error:
                    properties:
                        Message:
                            type: string
                    type: object
                StatusCode:
                    description: container exit code
                    format: int64
                    type: integer
            type: object
    containersList:
        description: List Containers
        schema:
            items:
                $ref: '#/definitions/Container'
            type: array
    containersListLibpod:
        description: List Containers
        schema:
            items:
                $ref: '#/definitions/ListContainer'
            type: array
    containersPrune:
        description: Prune Containers
        schema:
            items:
                $ref: '#/definitions/ContainersPruneReport'
            type: array
    containersPruneLibpod:
        description: Prune Containers
        schema:
            items:
                $ref: '#/definitions/ContainersPruneReportLibpod'
            type: array
    errorFromRegistry:
        description: Error from registry
        schema:
            $ref: '#/definitions/ErrorModel'
    execSessionInspect:
        description: Exec Session Inspect
        schema:
            $ref: '#/definitions/InspectExecSession'
    execSessionNotFound:
        description: No such exec instance
        schema:
            $ref: '#/definitions/ErrorModel'
    fileNotFound:
        description: No such file
        schema:
            $ref: '#/definitions/ErrorModel'
    healthCheck:
        description: Healthcheck Results
        schema:
            $ref: '#/definitions/HealthCheckResults'
    history:
        description: Image History
        schema:
            $ref: '#/definitions/HistoryResponse'
    imageDeleteResponse:
        description: Image Delete
        schema:
            items:
                properties:
                    deleted:
                        type: string
                        x-go-name: Deleted
                    untagged:
                        items:
                            type: string
                        type: array
                        x-go-name: Untagged
                type: object
            type: array
    imageInspect:
        description: Image Inspect
        schema:
            $ref: '#/definitions/ImageInspect'
    imageList:
        description: Image summary for compat API
        schema:
            items:
                $ref: '#/definitions/Summary'
            type: array
    imageListLibpod:
        description: Image summary for libpod API
        schema:
            items:
                $ref: '#/definitions/ImageSummary'
            type: array
    imageNotFound:
        description: No such image
        schema:
            $ref: '#/definitions/ErrorModel'
    imagesImportResponseLibpod:
        description: Image Import
        schema:
            $ref: '#/definitions/ImageImportReport'
    imagesLoadResponseLibpod:
        description: Image Load
        schema:
            $ref: '#/definitions/ImageLoadReport'
    imagesPruneLibpod:
        description: Image Prune
        schema:
            items:
                $ref: '#/definitions/PruneReport'
            type: array
    imagesPullResponseLibpod:
        description: Image Pull. Errors may be detected later even if this returns HTTP status 200, and in that case, the error description will be in the `error` field.
        schema:
            $ref: '#/definitions/LibpodImagesPullReport'
    imagesRemoveResponseLibpod:
        description: Image Remove
        schema:
            $ref: '#/definitions/LibpodImagesRemoveReport'
    imagesScpResponseLibpod:
        description: Image Scp
        schema:
            $ref: '#/definitions/ScpReport'
    infoResponse:
        description: Info
        schema:
            $ref: '#/definitions/LibpodInfo'
    inspectArtifactResponse:
        description: Inspect Artifact
        schema:
            $ref: '#/definitions/ArtifactInspectReport'
    inspectImageResponseLibpod:
        description: Inspect Image
        schema:
            $ref: '#/definitions/ImageData'
    internalError:
        description: Internal server error
        schema:
            $ref: '#/definitions/ErrorModel'
    manifestInspect:
        description: Inspect Manifest
        schema:
            $ref: '#/definitions/Schema2List'
    manifestNotFound:
        description: No such manifest
        schema:
            $ref: '#/definitions/ErrorModel'
    networkConnectedError:
        description: Network is already connected and container is running or transitioning to the running state ('initialized')
        schema:
            $ref: '#/definitions/ErrorModel'
    networkCreateResponse:
        description: Network create
        schema:
            $ref: '#/definitions/Network'
    networkInspectCompat:
        description: Network inspect
        schema:
            $ref: '#/definitions/Inspect'
    networkInspectResponse:
        description: Network inspect
        schema:
            $ref: '#/definitions/NetworkInspectReport'
    networkListCompat:
        description: Network list
        schema:
            items:
                $ref: '#/definitions/Summary'
            type: array
    networkListLibpod:
        description: Network list
        schema:
            items:
                $ref: '#/definitions/Network'
            type: array
    networkNotFound:
        description: No such network
        schema:
            $ref: '#/definitions/ErrorModel'
    networkPruneResponse:
        description: Network prune
        schema:
            items:
                $ref: '#/definitions/NetworkPruneReport'
            type: array
    networkRmResponse:
        description: Network Delete
        schema:
            items:
                $ref: '#/definitions/NetworkRmReport'
            type: array
    ok:
        description: Success
        schema:
            type: object
    playKubeResponseLibpod:
        description: PlayKube response
        schema:
            $ref: '#/definitions/PlayKubeReport'
    podAlreadyStartedError:
        description: Pod already started
        schema:
            $ref: '#/definitions/ErrorModel'
    podAlreadyStoppedError:
        description: Pod already stopped
        schema:
            $ref: '#/definitions/ErrorModel'
    podInspectResponse:
        description: Inspect pod
        schema:
            $ref: '#/definitions/InspectPodData'
    podKillResponse:
        description: Kill Pod
        schema:
            $ref: '#/definitions/PodKillReport'
    podNotFound:
        description: No such pod
        schema:
            $ref: '#/definitions/ErrorModel'
    podPauseResponse:
        description: Pause pod
        schema:
            $ref: '#/definitions/PodPauseReport'
    podPruneResponse:
        description: Prune pod
        schema:
            $ref: '#/definitions/PodPruneReport'
    podRestartResponse:
        description: Restart pod
        schema:
            $ref: '#/definitions/PodRestartReport'
    podRmResponse:
        description: Rm pod
        schema:
            $ref: '#/definitions/PodRmReport'
    podStartResponse:
        description: Start pod
        schema:
            $ref: '#/definitions/PodStartReport'
    podStatsResponse:
        description: Pod Statistics
        schema:
            items:
                $ref: '#/definitions/PodStatsReport'
            type: array
    podStopResponse:
        description: Stop pod
        schema:
            $ref: '#/definitions/PodStopReport'
    podTopResponse:
        description: List processes in pod
        schema:
            $ref: '#/definitions/PodTopOKBody'
    podUnpauseResponse:
        description: Unpause pod
        schema:
            $ref: '#/definitions/PodUnpauseReport'
    podsListResponse:
        description: List pods
        schema:
            items:
                $ref: '#/definitions/ListPodsReport'
            type: array
    quadletFileResponse:
        description: Quadlet file
    quadletListResponse:
        description: Quadlet list
        schema:
            items:
                $ref: '#/definitions/ListQuadlet'
            type: array
    quadletNotFound:
        description: No such quadlet
        schema:
            $ref: '#/definitions/ErrorModel'
    quadletRemoveResponse:
        description: Quadlet remove
        schema:
            $ref: '#/definitions/QuadletRemoveReport'
    registrySearchResponse:
        description: Registry Search
        schema:
            properties:
                Automated:
                    description: Automated indicates if the image was created by an automated build.
                    type: string
                Description:
                    description: Description of the image.
                    type: string
                Index:
                    description: Index is the image index
                    example: quay.io
                    type: string
                Name:
                    description: Name is the canonical name of the image
                    example: docker.io/library/alpine"
                    type: string
                Official:
                    description: Official indicates if it's an official image.
                    type: string
                Stars:
                    description: Stars is the number of stars of the image.
                    format: int64
                    type: integer
                Tag:
                    description: Tag is the image tag
                    type: string
            type: object
    systemAuthResponse:
        description: Auth response
        schema:
            $ref: '#/definitions/AuthReport'
    systemCheckResponse:
        description: Check
        schema:
            $ref: '#/definitions/SystemCheckReport'
    systemDiskUsage:
        description: Disk usage
        schema:
            $ref: '#/definitions/SystemDfReport'
    systemPruneResponse:
        description: System Prune results
        schema:
            $ref: '#/definitions/SystemPruneReport'
    treeResponse:
        description: Image Tree
        schema:
            $ref: '#/definitions/ImageTreeReport'
    versionResponse:
        description: Version
        schema:
            $ref: '#/definitions/ComponentVersion'
    volumeCreateResponse:
        description: Volume details
        schema:
            $ref: '#/definitions/VolumeConfigResponse'
    volumeInspect:
        description: This response definition is used for both the create and inspect endpoints
        schema:
            $ref: '#/definitions/Volume'
    volumeList:
        description: Volume List
        schema:
            $ref: '#/definitions/ListResponse'
    volumeListLibpod:
        description: Volume list
        schema:
            items:
                $ref: '#/definitions/VolumeConfigResponse'
            type: array
    volumeNotFound:
        description: No such volume
        schema:
            $ref: '#/definitions/ErrorModel'
    volumePruneLibpod:
        description: Volume Prune
        schema:
            items:
                $ref: '#/definitions/PruneReport'
            type: array
    volumePruneResponse:
        description: Volume prune
        schema:
            $ref: '#/definitions/PruneReport'
schemes:
    - http
    - https
swagger: "2.0"
tags:
    - description: Actions related to artifacts
      name: artifacts
    - description: Actions related to containers
      name: containers
    - description: Actions related to exec
      name: exec
    - description: Actions related to images
      name: images
    - description: Actions related to manifests
      name: manifests
    - description: Actions related to networks
      name: networks
    - description: Actions related to pods
      name: pods
    - description: Actions related to volumes
      name: volumes
    - description: Actions related to secrets
      name: secrets
    - description: Actions related to Podman engine
      name: system
    - description: Actions related to containers for the compatibility endpoints
      name: containers (compat)
    - description: Actions related to exec for the compatibility endpoints
      name: exec (compat)
    - description: Actions related to images for the compatibility endpoints
      name: images (compat)
    - description: Actions related to networks for the compatibility endpoints
      name: networks (compat)
    - description: Actions related to volumes for the compatibility endpoints
      name: volumes (compat)
    - description: Actions related to secrets for the compatibility endpoints
      name: secrets (compat)
    - description: Actions related to Podman and compatibility engines
      name: system (compat)