##########################################################################################

# NOTE:
#
# The following board-specific properties are auto-generated by 'build.sh'
# and saved in 'boards.local.txt'. VALUES IN THIS FILE WILL HAVE NO EFFECT.
#
# - build.architecture
# - build.float-abi
# - build.fpu
# - build.mcu
# - upload.address
# - upload.maximum_data_size
# - upload.maximum_size

##########################################################################################

menu.debug=Debug
menu.link_mode=Link mode
menu.wait_linux_boot=Startup mode

##########################################################################################

giga.name=Arduino Giga R1
giga.build.core=arduino
giga.build.crossprefix=arm-zephyr-eabi-
giga.build.compiler_path={runtime.tools.arm-zephyr-eabi-1.0.1.path}/bin/

giga.menu.debug.false=Standard
giga.menu.debug.true=Debug
giga.menu.debug.true.build.zsk_args.debug=-debug

giga.menu.link_mode.dynamic=Dynamic
giga.menu.link_mode.static=Static
giga.menu.link_mode.static.build.link_mode=static
giga.menu.link_mode.static.upload.extension=bin-zsk.bin

giga.build.zephyr_target=arduino_giga_r1//m7
giga.build.zephyr_args=--shield arduino_giga_display_shield
giga.build.zephyr_hals=hal_stm32 hal_infineon
giga.build.zephyr_toolchain=arm-zephyr-eabi
giga.build.variant=arduino_giga_r1_stm32h747xx_m7
giga.build.artifact=zephyr_main

giga.build.extra_flags=
giga.build.postbuild.cmd="{tools.imgtool.path}/{tools.imgtool.cmd}" exit
giga.build.board=GIGA
giga.upload_port.0.vid=0x2341
giga.upload_port.0.pid=0x0666

giga.upload.tool=dfu-util
giga.upload.tool.default=dfu-util
giga.upload.protocol=
giga.upload.transport=
giga.upload.interface=0
giga.upload.use_1200bps_touch=true
giga.upload.wait_for_upload_port=true
giga.upload.native_usb=true

giga.bootloader.tool=dfu-util
giga.bootloader.tool.default=dfu-util
giga.bootloader.pid=0x0366
giga.bootloader.interface=0
giga.bootloader.file=zephyr-{build.variant}.bin
giga.bootloader.address=0x08040000

giga.debug.tool=gdb
giga.debug.server.openocd.scripts.0=interface/{programmer.protocol}.cfg
giga.debug.server.openocd.scripts.1={programmer.transport_script}
giga.debug.server.openocd.scripts.2=target/stm32h7x_dual_bank.cfg
giga.debug.cortex-debug.custom.request=attach
giga.debug.svd_file={runtime.platform.path}/svd/STM32H747_CM7.svd

giga.build.ota.magic=0x23410266
giga.build.ota.sketch_offset={bootloader.maximum_size}

##########################################################################################

nano33ble.name=Arduino Nano 33 BLE
nano33ble.build.core=arduino
nano33ble.build.crossprefix=arm-zephyr-eabi-
nano33ble.build.compiler_path={runtime.tools.arm-zephyr-eabi-1.0.1.path}/bin/

nano33ble.menu.debug.false=Standard
nano33ble.menu.debug.true=Debug
nano33ble.menu.debug.true.build.zsk_args.debug=-debug

nano33ble.menu.link_mode.dynamic=Dynamic
nano33ble.menu.link_mode.static=Static
nano33ble.menu.link_mode.static.build.link_mode=static
nano33ble.menu.link_mode.static.upload.extension=bin-zsk.bin

nano33ble.build.zephyr_target=arduino_nano_33_ble//sense
nano33ble.build.zephyr_args=
nano33ble.build.zephyr_hals=hal_nordic
nano33ble.build.zephyr_toolchain=arm-zephyr-eabi
nano33ble.build.artifact=zephyr_main
nano33ble.build.variant=arduino_nano_33_ble_nrf52840_sense

nano33ble.build.extra_flags=
nano33ble.build.postbuild.cmd="{tools.imgtool.path}/{tools.imgtool.cmd}" exit
nano33ble.build.board=NANO33BLE
nano33ble.upload_port.0.vid=0x2341
nano33ble.upload_port.0.pid=0x065a

nano33ble.upload.tool=bossac
nano33ble.upload.tool.default=bossac
nano33ble.upload.protocol=
nano33ble.upload.transport=
nano33ble.upload.use_1200bps_touch=true
nano33ble.upload.wait_for_upload_port=true
nano33ble.upload.native_usb=true
nano33ble.upload.offset=0x10000 # bootloader skips its own partition

nano33ble.bootloader.tool=bossac
nano33ble.bootloader.tool.default=bossac
nano33ble.bootloader.file=zephyr-{build.variant}.bin
nano33ble.bootloader.address=0x0000

nano33ble.debug.tool=gdb
nano33ble.debug.server.openocd.scripts.0=interface/{programmer.protocol}.cfg
nano33ble.debug.server.openocd.scripts.1={programmer.transport_script}
nano33ble.debug.server.openocd.scripts.2=target/nrf52.cfg
nano33ble.debug.cortex-debug.custom.request=attach

##############################################################################################################

ek_ra8d1.name=Renesas RA8D1 EK
ek_ra8d1.build.core=arduino
ek_ra8d1.build.crossprefix=arm-zephyr-eabi-
ek_ra8d1.build.compiler_path={runtime.tools.arm-zephyr-eabi-1.0.1.path}/bin/

ek_ra8d1.menu.debug.false=Standard
ek_ra8d1.menu.debug.true=Debug
ek_ra8d1.menu.debug.true.build.zsk_args.debug=-debug

ek_ra8d1.menu.link_mode.dynamic=Dynamic
ek_ra8d1.menu.link_mode.static=Static
ek_ra8d1.menu.link_mode.static.build.link_mode=static
ek_ra8d1.menu.link_mode.static.upload.extension=bin-zsk.bin

ek_ra8d1.build.zephyr_target=ek_ra8d1
ek_ra8d1.build.zephyr_args=
ek_ra8d1.build.zephyr_hals=hal_renesas
ek_ra8d1.build.zephyr_toolchain=arm-zephyr-eabi
ek_ra8d1.build.variant=ek_ra8d1_r7fa8d1bhecbd

ek_ra8d1.build.extra_flags=
ek_ra8d1.build.postbuild.cmd="{tools.imgtool.path}/{tools.imgtool.cmd}" exit
ek_ra8d1.build.board=EK_RA8D1

#ek_ra8d1.recipe.hooks.objcopy.postobjcopy.4.pattern=cp {build.variant.path}/flasher.jlink "{build.path}/flasher.jlink"
#ek_ra8d1.recipe.hooks.objcopy.postobjcopy.5.pattern=sed -i 's|SKETCH|"{build.path}/{build.project_name}.llext.dfu.bin"|g' "{build.path}/flasher.jlink"

ek_ra8d1.upload_port.0.vid=0x045b
ek_ra8d1.upload_port.0.pid=0x0261

ek_ra8d1.upload.tool=pyocd
ek_ra8d1.upload.tool.default=pyocd
ek_ra8d1.upload.protocol=
ek_ra8d1.upload.transport=
ek_ra8d1.upload.use_1200bps_touch=false
ek_ra8d1.upload.wait_for_upload_port=false
ek_ra8d1.upload.native_usb=true
ek_ra8d1.upload.target=R7FA8D1AH

ek_ra8d1.bootloader.tool=pyocd
ek_ra8d1.bootloader.tool.default=pyocd
ek_ra8d1.bootloader.file=zephyr-{build.variant}.elf
ek_ra8d1.bootloader.target=R7FA8D1AH


##############################################################################################################

frdm_mcxn947.name=NXP FRDM MCXN947
frdm_mcxn947.build.core=arduino
frdm_mcxn947.build.crossprefix=arm-zephyr-eabi-
frdm_mcxn947.build.compiler_path={runtime.tools.arm-zephyr-eabi-1.0.1.path}/bin/

frdm_mcxn947.menu.debug.false=Standard
frdm_mcxn947.menu.debug.true=Debug
frdm_mcxn947.menu.debug.true.build.zsk_args.debug=-debug

frdm_mcxn947.menu.link_mode.dynamic=Dynamic
frdm_mcxn947.menu.link_mode.static=Static
frdm_mcxn947.menu.link_mode.static.build.link_mode=static
frdm_mcxn947.menu.link_mode.static.upload.extension=bin-zsk.bin

frdm_mcxn947.build.zephyr_target=frdm_mcxn947//cpu0
frdm_mcxn947.build.zephyr_args=
frdm_mcxn947.build.zephyr_hals=hal_nxp
frdm_mcxn947.build.zephyr_toolchain=arm-zephyr-eabi
frdm_mcxn947.build.variant=frdm_mcxn947_mcxn947_cpu0

frdm_mcxn947.build.extra_flags=
frdm_mcxn947.build.postbuild.cmd="{tools.imgtool.path}/{tools.imgtool.cmd}" exit
frdm_mcxn947.build.board=FRDM_MCXN947
frdm_mcxn947.upload_port.0.vid=0x1fc9
frdm_mcxn947.upload_port.0.pid=0x0143
frdm_mcxn947.upload.target=mcxn947vdf

frdm_mcxn947.upload.tool=pyocd
frdm_mcxn947.upload.tool.default=pyocd
frdm_mcxn947.upload.protocol=
frdm_mcxn947.upload.transport=
frdm_mcxn947.upload.use_1200bps_touch=false
frdm_mcxn947.upload.wait_for_upload_port=false
frdm_mcxn947.upload.native_usb=true

frdm_mcxn947.bootloader.tool=pyocd
frdm_mcxn947.bootloader.tool.default=pyocd
frdm_mcxn947.bootloader.file=zephyr-{build.variant}.elf
frdm_mcxn947.bootloader.target=mcxn947vdf


##########################################################################################

portentah7.name=Arduino Portenta H7
portentah7.build.core=arduino
portentah7.build.crossprefix=arm-zephyr-eabi-
portentah7.build.compiler_path={runtime.tools.arm-zephyr-eabi-1.0.1.path}/bin/

portentah7.menu.debug.false=Standard
portentah7.menu.debug.true=Debug
portentah7.menu.debug.true.build.zsk_args.debug=-debug

portentah7.menu.link_mode.dynamic=Dynamic
portentah7.menu.link_mode.static=Static
portentah7.menu.link_mode.static.build.link_mode=static
portentah7.menu.link_mode.static.upload.extension=bin-zsk.bin

portentah7.build.zephyr_target=arduino_portenta_h7@1.0.0//m7
portentah7.build.zephyr_args=
portentah7.build.zephyr_hals=hal_stm32 hal_infineon hal_st
portentah7.build.zephyr_toolchain=arm-zephyr-eabi
portentah7.build.artifact=zephyr_main
portentah7.build.variant=arduino_portenta_h7_stm32h747xx_m7

portentah7.build.extra_flags=
portentah7.build.postbuild.cmd="{tools.imgtool.path}/{tools.imgtool.cmd}" exit
portentah7.build.board=PORTENTA_H7_M7
portentah7.upload_port.0.vid=0x2341
portentah7.upload_port.0.pid=0x065b

portentah7.upload.tool=dfu-util
portentah7.upload.tool.default=dfu-util
portentah7.upload.protocol=
portentah7.upload.transport=
portentah7.upload.interface=0
portentah7.upload.use_1200bps_touch=true
portentah7.upload.wait_for_upload_port=true
portentah7.upload.native_usb=true

portentah7.bootloader.tool=dfu-util
portentah7.bootloader.tool.default=dfu-util
portentah7.bootloader.pid=0x035b
portentah7.bootloader.interface=0
portentah7.bootloader.file=zephyr-{build.variant}.bin
portentah7.bootloader.address=0x08040000

portentah7.build.ota.magic=0x2341025B
portentah7.build.ota.sketch_offset={bootloader.maximum_size}

portentah7.debug.tool=gdb
portentah7.debug.server.openocd.scripts.0=interface/{programmer.protocol}.cfg
portentah7.debug.server.openocd.scripts.1={programmer.transport_script}
portentah7.debug.server.openocd.scripts.2=target/stm32h7x_dual_bank.cfg
portentah7.debug.cortex-debug.custom.request=attach
portentah7.debug.svd_file={runtime.platform.path}/svd/STM32H747_CM7.svd

##############################################################################################################

nicla_vision.name=Arduino Nicla Vision
nicla_vision.build.core=arduino
nicla_vision.build.crossprefix=arm-zephyr-eabi-
nicla_vision.build.compiler_path={runtime.tools.arm-zephyr-eabi-1.0.1.path}/bin/

nicla_vision.menu.debug.false=Standard
nicla_vision.menu.debug.true=Debug
nicla_vision.menu.debug.true.build.zsk_args.debug=-debug

nicla_vision.menu.link_mode.dynamic=Dynamic
nicla_vision.menu.link_mode.static=Static
nicla_vision.menu.link_mode.static.build.link_mode=static
nicla_vision.menu.link_mode.static.upload.extension=bin-zsk.bin

nicla_vision.build.zephyr_target=arduino_nicla_vision//m7
nicla_vision.build.zephyr_args=
nicla_vision.build.zephyr_hals=hal_stm32 hal_infineon
nicla_vision.build.zephyr_toolchain=arm-zephyr-eabi
nicla_vision.build.artifact=zephyr_main
nicla_vision.build.variant=arduino_nicla_vision_stm32h747xx_m7

nicla_vision.build.extra_flags=
nicla_vision.build.postbuild.cmd="{tools.imgtool.path}/{tools.imgtool.cmd}" exit
nicla_vision.build.board=NICLA_VISION
nicla_vision.upload_port.0.vid=0x2341
nicla_vision.upload_port.0.pid=0x065f

nicla_vision.upload.tool=dfu-util
nicla_vision.upload.tool.default=dfu-util
nicla_vision.upload.protocol=
nicla_vision.upload.transport=
nicla_vision.upload.interface=0
nicla_vision.upload.use_1200bps_touch=true
nicla_vision.upload.wait_for_upload_port=true
nicla_vision.upload.native_usb=true

nicla_vision.bootloader.tool=dfu-util
nicla_vision.bootloader.tool.default=dfu-util
nicla_vision.bootloader.pid=0x035f
nicla_vision.bootloader.interface=0
nicla_vision.bootloader.file=zephyr-{build.variant}.bin
nicla_vision.bootloader.address=0x08040000

nicla_vision.build.ota.magic=0x2341025F
nicla_vision.build.ota.sketch_offset={bootloader.maximum_size}

nicla_vision.debug.tool=gdb
nicla_vision.debug.server.openocd.scripts.0=interface/{programmer.protocol}.cfg
nicla_vision.debug.server.openocd.scripts.1={programmer.transport_script}
nicla_vision.debug.server.openocd.scripts.2=target/stm32h7x_dual_bank.cfg
nicla_vision.debug.cortex-debug.custom.request=attach
nicla_vision.debug.svd_file={runtime.platform.path}/svd/STM32H747_CM7.svd

##############################################################################################################

frdm_rw612.name=NXP FRDM RW612
frdm_rw612.build.core=arduino
frdm_rw612.build.crossprefix=arm-zephyr-eabi-
frdm_rw612.build.compiler_path={runtime.tools.arm-zephyr-eabi-1.0.1.path}/bin/

frdm_rw612.menu.debug.false=Standard
frdm_rw612.menu.debug.true=Debug
frdm_rw612.menu.debug.true.build.zsk_args.debug=-debug

frdm_rw612.menu.link_mode.dynamic=Dynamic
frdm_rw612.menu.link_mode.static=Static
frdm_rw612.menu.link_mode.static.build.link_mode=static
frdm_rw612.menu.link_mode.static.upload.extension=bin-zsk.bin

frdm_rw612.build.zephyr_target=frdm_rw612
frdm_rw612.build.zephyr_args=
frdm_rw612.build.zephyr_hals=hal_nxp
frdm_rw612.build.zephyr_toolchain=arm-zephyr-eabi
frdm_rw612.build.variant=frdm_rw612_rw612

frdm_rw612.build.extra_flags=
frdm_rw612.build.postbuild.cmd="{tools.imgtool.path}/{tools.imgtool.cmd}" exit
frdm_rw612.build.board=FRDM_RW612
frdm_rw612.upload_port.0.vid=0x1fc9
frdm_rw612.upload_port.0.pid=0x0143
frdm_rw612.upload.target=rw612

frdm_rw612.upload.tool=pyocd
frdm_rw612.upload.tool.default=pyocd
frdm_rw612.upload.protocol=
frdm_rw612.upload.transport=
frdm_rw612.upload.use_1200bps_touch=false
frdm_rw612.upload.wait_for_upload_port=false
frdm_rw612.upload.native_usb=true

frdm_rw612.bootloader.tool=pyocd
frdm_rw612.bootloader.tool.default=pyocd
frdm_rw612.bootloader.file=zephyr-{build.variant}.elf
frdm_rw612.bootloader.target=rw612

##########################################################################################

nicla_sense.name=Arduino Nicla Sense ME
nicla_sense.build.core=arduino
nicla_sense.build.crossprefix=arm-zephyr-eabi-
nicla_sense.build.compiler_path={runtime.tools.arm-zephyr-eabi-1.0.1.path}/bin/

nicla_sense.menu.link_mode.dynamic=Dynamic
nicla_sense.menu.link_mode.static=Static
nicla_sense.menu.link_mode.static.build.link_mode=static
nicla_sense.menu.link_mode.static.upload.extension=bin-zsk.bin

nicla_sense.build.zephyr_target=arduino_nicla_sense_me
nicla_sense.build.zephyr_args=
nicla_sense.build.zephyr_hals=hal_nordic
nicla_sense.build.zephyr_toolchain=arm-zephyr-eabi
nicla_sense.build.artifact=zephyr_main
nicla_sense.build.variant=arduino_nicla_sense_me_nrf52832

nicla_sense.openocd_cfg=flash_sketch.cfg
nicla_sense.build.extra_flags=
nicla_sense.build.postbuild.cmd="{tools.imgtool.path}/{tools.imgtool.cmd}" exit
nicla_sense.build.board=NICLA_SENSE_ME
nicla_sense.upload_port.0.vid=0x2341
nicla_sense.upload_port.0.pid=0x0060

nicla_sense.upload.tool=openocd
nicla_sense.upload.tool.default=openocd
nicla_sense.upload.protocol=
nicla_sense.upload.config=-f target/nrf52.cfg
nicla_sense.upload.programmer=-f interface/cmsis-dap.cfg
nicla_sense.upload.use_1200bps_touch=false
nicla_sense.upload.wait_for_upload_port=false
nicla_sense.upload.native_usb=false
nicla_sense.upload.target=nrf52

nicla_sense.bootloader.tool=openocd
nicla_sense.bootloader.tool.default=openocd
nicla_sense.bootloader.file=zephyr-{build.variant}.hex
nicla_sense.bootloader.target=nrf52

nicla_sense.debug.tool=gdb
nicla_sense.debug.server.openocd.scripts.0=interface/{programmer.protocol}.cfg
nicla_sense.debug.server.openocd.scripts.1={programmer.transport_script}
nicla_sense.debug.server.openocd.scripts.2=target/nrf52.cfg
nicla_sense.debug.cortex-debug.custom.request=attach


##########################################################################################

portentac33.name=Arduino Portenta C33
portentac33.build.core=arduino
portentac33.build.crossprefix=arm-zephyr-eabi-
portentac33.build.compiler_path={runtime.tools.arm-zephyr-eabi-1.0.1.path}/bin/

portentac33.menu.debug.false=Standard
portentac33.menu.debug.true=Debug
portentac33.menu.debug.true.build.zsk_args.debug=-debug

portentac33.menu.link_mode.dynamic=Dynamic
portentac33.menu.link_mode.static=Static
portentac33.menu.link_mode.static.build.link_mode=static
portentac33.menu.link_mode.static.upload.extension=bin-zsk.bin

portentac33.build.zephyr_target=arduino_portenta_c33
portentac33.build.zephyr_args=
portentac33.build.zephyr_hals=hal_renesas nanopb
portentac33.build.zephyr_toolchain=arm-zephyr-eabi
portentac33.build.artifact=zephyr_main
portentac33.build.variant=arduino_portenta_c33_r7fa6m5bh3cfc

portentac33.build.extra_flags=
portentac33.build.postbuild.cmd="{tools.imgtool.path}/{tools.imgtool.cmd}" exit
portentac33.build.board=PORTENTA_C33
portentac33.upload_port.0.vid=0x2341
portentac33.upload_port.0.pid=0x0668
portentac33.upload.target=portentac33

portentac33.upload.tool=dfu-util
portentac33.upload.tool.default=dfu-util
portentac33.upload.protocol=
portentac33.upload.transport=
portentac33.upload.interface=1
portentac33.upload.use_1200bps_touch=true
portentac33.upload.wait_for_upload_port=false
portentac33.upload.native_usb=true
portentac33.upload.dfuse=

portentac33.bootloader.tool=dfu-util
portentac33.bootloader.tool.default=dfu-util
portentac33.bootloader.file=zephyr-{build.variant}.bin
portentac33.bootloader.interface=0
portentac33.bootloader.address=0x10000
portentac33.bootloader.pid=0x0368
portentac33.bootloader.dfuse=

# the space before the extra arguments is important
portentac33.leave.dfuse={empty} -Q
portentac33.loader.args.with_sketch={empty} -w
portentac33.sketch.args.without_loader={empty} -w

portentac33.build.ota.magic=0x23410068
portentac33.build.ota.sketch_offset={bootloader.maximum_size}

##########################################################################################

opta.name=Arduino Opta
opta.build.core=arduino
opta.build.crossprefix=arm-zephyr-eabi-
opta.build.compiler_path={runtime.tools.arm-zephyr-eabi-1.0.1.path}/bin/

opta.menu.debug.false=Standard
opta.menu.debug.true=Debug
opta.menu.debug.true.build.zsk_args.debug=-debug

opta.menu.link_mode.dynamic=Dynamic
opta.menu.link_mode.static=Static
opta.menu.link_mode.static.build.link_mode=static
opta.menu.link_mode.static.upload.extension=bin-zsk.bin

opta.build.zephyr_target=arduino_opta//m7
opta.build.zephyr_args=
opta.build.zephyr_hals=hal_stm32 hal_infineon
opta.build.zephyr_toolchain=arm-zephyr-eabi
opta.build.artifact=zephyr_main
opta.build.variant=arduino_opta_stm32h747xx_m7

opta.build.extra_flags=
opta.build.postbuild.cmd="{tools.imgtool.path}/{tools.imgtool.cmd}" exit
opta.build.board=OPTA
opta.upload_port.0.vid=0x2341
opta.upload_port.0.pid=0x0664

opta.upload.tool=dfu-util
opta.upload.tool.default=dfu-util
opta.upload.protocol=
opta.upload.transport=
opta.upload.interface=0
opta.upload.use_1200bps_touch=true
opta.upload.wait_for_upload_port=true
opta.upload.native_usb=true

opta.bootloader.tool=dfu-util
opta.bootloader.tool.default=dfu-util
opta.bootloader.pid=0x0364
opta.bootloader.interface=0
opta.bootloader.file=zephyr-{build.variant}.bin
opta.bootloader.address=0x08040000

opta.debug.tool=gdb
opta.debug.server.openocd.scripts.0=interface/{programmer.protocol}.cfg
opta.debug.server.openocd.scripts.1={programmer.transport_script}
opta.debug.server.openocd.scripts.2=target/stm32h7x_dual_bank.cfg
opta.debug.cortex-debug.custom.request=attach
opta.debug.svd_file={runtime.platform.path}/svd/STM32H747_CM7.svd

opta.build.ota.magic=0x23410064
opta.build.ota.sketch_offset={bootloader.maximum_size}

##########################################################################################

nano_matter.name=Arduino Nano Matter
nano_matter.build.core=arduino
nano_matter.build.crossprefix=arm-zephyr-eabi-
nano_matter.build.compiler_path={runtime.tools.arm-zephyr-eabi-1.0.1.path}/bin/

nano_matter.menu.link_mode.dynamic=Dynamic
nano_matter.menu.link_mode.static=Static
nano_matter.menu.link_mode.static.build.link_mode=static
nano_matter.menu.link_mode.static.upload.extension=bin-zsk.bin

nano_matter.build.zephyr_target=arduino_nano_matter
nano_matter.build.zephyr_args=
nano_matter.build.zephyr_hals=hal_silabs
nano_matter.build.zephyr_toolchain=arm-zephyr-eabi
nano_matter.build.artifact=zephyr_main
nano_matter.build.variant=arduino_nano_matter_mgm240sd22vna

nano_matter.openocd_cfg=flash_sketch.cfg
nano_matter.build.extra_flags=
nano_matter.build.postbuild.cmd="{tools.imgtool.path}/{tools.imgtool.cmd}" exit
nano_matter.build.board=ARDUINO_NANO_MATTER
nano_matter.upload_port.0.vid=0x2341
nano_matter.upload_port.0.pid=0x0072

nano_matter.upload.tool=openocd
nano_matter.upload.tool.default=openocd
nano_matter.upload.config=-f target/efm32s2_g23.cfg
nano_matter.upload.programmer=-f interface/cmsis-dap.cfg
nano_matter.upload.protocol=SWD
nano_matter.upload.setup_command=
nano_matter.upload.use_1200bps_touch=false
nano_matter.upload.wait_for_upload_port=false
nano_matter.upload.native_usb=false

nano_matter.bootloader.tool=openocd
nano_matter.bootloader.tool.default=openocd
nano_matter.bootloader.file=zephyr-{build.variant}.hex
nano_matter.bootloader.target=arduino_nano_matter

nano_matter.debug.server=openocd
nano_matter.debug.server.openocd.scripts.0=interface/cmsis-dap.cfg
nano_matter.debug.server.openocd.scripts.1=target/efm32s2_g23.cfg
nano_matter.debug.cortex-debug.custom.postAttachCommands.0=monitor reset halt
#nano_matter.debug.cortex-debug.custom.postAttachCommands.1=monitor reset_config srst_nogate
#nano_matter.debug.cortex-debug.custom.postAttachCommands.2=monitor gdb_breakpoint_override hard
nano_matter.debug.cortex-debug.custom.postAttachCommands.3=monitor gdb_sync
nano_matter.debug.cortex-debug.custom.postAttachCommands.4=c
nano_matter.debug.cortex-debug.custom.overrideRestartCommands.0=monitor reset halt
nano_matter.debug.cortex-debug.custom.overrideRestartCommands.1=monitor gdb_sync
nano_matter.debug.cortex-debug.custom.overrideRestartCommands.2=c
nano_matter.debug.cortex-debug.custom.request=attach

##############################################################################################################

unoq.name=Arduino UNO Q
unoq.build.core=arduino
unoq.build.crossprefix=arm-zephyr-eabi-
unoq.build.compiler_path={runtime.tools.arm-zephyr-eabi-1.0.1.path}/bin/

unoq.menu.link_mode.dynamic=Dynamic
unoq.menu.link_mode.static=Static
unoq.menu.link_mode.static.build.link_mode=static
unoq.menu.link_mode.static.upload.extension=bin-zsk.bin

unoq.menu.wait_linux_boot.yes=Wait for Linux
unoq.menu.wait_linux_boot.no=Immediate
unoq.menu.wait_linux_boot.no.build.boot_mode=immediate
unoq.menu.wait_linux_boot.app=Wait for App
unoq.menu.wait_linux_boot.app.build.boot_mode=app

unoq.build.zephyr_target=arduino_uno_q
unoq.build.zephyr_args=
unoq.build.zephyr_hals=hal_stm32
unoq.build.zephyr_toolchain=arm-zephyr-eabi
unoq.build.variant=arduino_uno_q_stm32u585xx
unoq.build.artifact=zephyr_unoq
unoq.build.subarch=zephyr

unoq.openocd_cfg=flash_sketch.cfg
unoq.build.extra_flags=
unoq.build.postbuild.cmd="{tools.imgtool.path}/{tools.imgtool.cmd}" exit
unoq.build.board=UNO_Q
unoq.upload_port.0.vid=0x2341
unoq.upload_port.0.pid=0x0078
unoq.upload.target=stm32u585zitxq

unoq.upload.tool=remoteocd
unoq.upload.tool.default=remoteocd
unoq.upload.tool.network=remoteocd_network
unoq.upload.protocol=
unoq.upload.transport=
unoq.upload.use_1200bps_touch=false
unoq.upload.wait_for_upload_port=false
unoq.upload.native_usb=true

unoq.bootloader.tool=remoteocd
unoq.bootloader.tool.default=remoteocd
unoq.bootloader.file=zephyr-{build.variant}.elf
unoq.bootloader.target=stm32u585zitxq

##############################################################################################################

nano_connect.name=Arduino Nano RP2040 Connect
nano_connect.build.core=arduino
nano_connect.build.crossprefix=arm-zephyr-eabi-
nano_connect.build.compiler_path={runtime.tools.arm-zephyr-eabi-1.0.1.path}/bin/

nano_connect.menu.debug.false=Standard
nano_connect.menu.debug.true=Debug
nano_connect.menu.debug.true.build.zsk_args.debug=-debug

nano_connect.menu.link_mode.dynamic=Dynamic
nano_connect.menu.link_mode.static=Static
nano_connect.menu.link_mode.static.build.link_mode=static
nano_connect.menu.link_mode.static.upload.extension=bin-zsk.bin

nano_connect.build.zephyr_target=arduino_nano_connect
nano_connect.build.zephyr_args=
nano_connect.build.zephyr_hals=hal_rpi_pico
nano_connect.build.zephyr_toolchain=arm-zephyr-eabi
nano_connect.build.artifact=zephyr_main
nano_connect.build.variant=arduino_nano_connect_rp2040

nano_connect.build.extra_flags=
nano_connect.build.postbuild.cmd="{tools.imgtool.path}/{tools.imgtool.cmd}" exit
nano_connect.recipe.hooks.objcopy.postobjcopy.3.pattern="{runtime.tools.bin2uf2.path}/bin2uf2" {upload.address} {upload.familyid} "{build.path}/{build.project_name}.{upload.extension}" "{build.path}/{build.project_name}.{upload.extension}.uf2"
nano_connect.upload.artifacts.sketch={build.path}/{build.project_name}.{upload.extension}.uf2
nano_connect.build.board=NANO_RP2040_CONNECT
nano_connect.upload_port.0.vid=0x2341
nano_connect.upload_port.0.pid=0x065E

nano_connect.upload.tool=picotool
nano_connect.upload.tool.default=picotool
nano_connect.upload.protocol=
nano_connect.upload.transport=
nano_connect.upload.use_1200bps_touch=true
nano_connect.upload.wait_for_upload_port=false
nano_connect.upload.native_usb=true

nano_connect.upload.familyid=0xe48bff56

nano_connect.bootloader.tool=picotool
nano_connect.bootloader.tool.default=picotool
nano_connect.bootloader.file=zephyr-{build.variant}.uf2

nano_connect.debug.tool=gdb
nano_connect.debug.server.openocd.scripts.0=interface/{programmer.protocol}.cfg
nano_connect.debug.server.openocd.scripts.1={programmer.transport_script}
nano_connect.debug.server.openocd.scripts.2=target/rp2040-core0.cfg
nano_connect.debug.cortex-debug.custom.request=attach
nano_connect.debug.svd_file={runtime.platform.path}/svd/rp2040.svd

##############################################################################################################

ventunoq.name=Arduino Ventuno Q
ventunoq.build.core=arduino
ventunoq.build.crossprefix=arm-zephyr-eabi-
ventunoq.build.compiler_path={runtime.tools.arm-zephyr-eabi-1.0.1.path}/bin/

ventunoq.menu.link_mode.dynamic=Dynamic
ventunoq.menu.link_mode.static=Static
ventunoq.menu.link_mode.static.build.link_mode=static
ventunoq.menu.link_mode.static.upload.extension=bin-zsk.bin

ventunoq.menu.wait_linux_boot.yes=Wait for Linux
ventunoq.menu.wait_linux_boot.no=Immediate
ventunoq.menu.wait_linux_boot.no.build.boot_mode=immediate
ventunoq.menu.wait_linux_boot.app=Wait for App
ventunoq.menu.wait_linux_boot.app.build.boot_mode=app
ventunoq.openocd_cfg=flash_sketch.cfg

ventunoq.build.zephyr_target=arduino_ventuno_q
ventunoq.build.zephyr_args=
ventunoq.build.variant=arduino_ventuno_q_stm32h5f5xx
ventunoq.build.artifact=zephyr_unoq
ventunoq.build.subarch=zephyr
ventunoq.build.mcu=cortex-m33
ventunoq.build.fpu=-mfpu=fpv5-sp-d16
ventunoq.build.architecture=cortex-m33
ventunoq.compiler.zephyr.arch.define=

ventunoq.build.float-abi=-mfloat-abi=hard
ventunoq.build.extra_flags=
ventunoq.build.postbuild.cmd="{tools.imgtool.path}/{tools.imgtool.cmd}" exit
ventunoq.build.board=VENTUNO_Q
ventunoq.build.zephyr_hals=hal_stm32
ventunoq.build.extra_flags=
ventunoq.compiler.zephyr=
ventunoq.vid.0=0x2341
ventunoq.pid.0=0x007a
ventunoq.vid.1=0x1209
ventunoq.pid.1=0xca01
ventunoq.upload_port.0.vid=0x2341
ventunoq.upload_port.0.pid=0x007a
ventunoq.upload.address=0x80F0000
ventunoq.upload.target=stm32h5f5xx

ventunoq.upload.tool=remoteocd
ventunoq.upload.tool.default=remoteocd
ventunoq.upload.tool.network=remoteocd_network
ventunoq.upload.protocol=
ventunoq.upload.transport=
ventunoq.upload.vid=0x2341
ventunoq.upload.pid=0x007a
ventunoq.upload.interface=0
ventunoq.upload.use_1200bps_touch=false
ventunoq.upload.wait_for_upload_port=false
ventunoq.upload.native_usb=true
ventunoq.upload.maximum_size=1966080
ventunoq.upload.maximum_data_size=523624

ventunoq.bootloader.tool=remoteocd
ventunoq.bootloader.tool.default=remoteocd
ventunoq.bootloader.file=zephyr-{build.variant}.elf
ventunoq.bootloader.target=stm32h5f5xx