# This file must be renamed to vfd.conf and placed in the /storage/.config/ folder. # # A95X F2 - S905X2 configuration #-------------------- #gpio_xxx: # [0] 0 = &gpio, 1 = &gpio_ao. # [1] pin number - https://github.com/openSUSE/kernel/blob/master/include/dt-bindings/gpio/meson-g12a-gpio.h # [2] Reserved - must be 0. vfd_gpio_clk='1,7,0' vfd_gpio_dat='1,8,0' vfd_gpio_stb='1,6,0' #chars: # < DHHMM > Order of display chars (D=dots, represented by a single char) vfd_chars='4,0,1,2,3' #dot_bits: # Order of dot bits. Typical configurations: # Display Type 0, 1 usually has Alarm, USB, Play, Pause, Col, Ethernet, Wifi dots # Alarm = 0, USB = 1, Play = 2, Pause = 3, Col = 4, Eth = 5, Wifi = 6 # Display Type 2 usually has APPS, USB, SETUP, CARD, Col, HDMI, CVBS dots # APPS = 0, USB = 1, SETUP = 2, CARD = 3, Col = 4, HDMI = 5, CVBS = 6 # Display Type 3 Power, LAN, Col, Low Wifi, High Wifi # N/A = 0, N/A = 1, Power = 2, LAN = 3, Col = 4, High Wifi = 5, Low Wifi = 6 vfd_dot_bits='0,1,2,3,4,5,6' #display_type: # [0] - Display type. # [1] - Reserved - must be 0. # [2] - Flags. (bit 0 = '1' - Common Anode display, bits [1-7] - Reserved.) # [3] - Controller. vfd_display_type='0x03,0x00,0x00,0x00'