{
  "whitelist": [
  ],
  "blacklist": [
    {
      "type": "TPU",
      "action": "prohibition",
      "slot": "ams",
      "ams_type_id": [1, 2, 3, 4, 6],
      "description": "TPU is not supported by AMS."
    },
    {
      "vendor": "Bambu Lab",
      "type": "PET-CF",
      "action": "prohibition",
      "slot": "ams",
      "ams_type_id": [1, 2, 3, 4, 5],
      "group": "cf_gf_ams",
      "priority": 2,
      "description": "%s does not support %s printing, as filament may break in the bent PTFE tube above the toolhead."
    },
    {
      "vendor": "Bambu Lab",
      "type": "PA6-CF",
      "action": "prohibition",
      "slot": "ams",
      "ams_type_id": [1, 2, 3, 4, 5],
      "group": "cf_gf_ams",
      "priority": 2,
      "description": "%s does not support %s printing, as filament may break in the bent PTFE tube above the toolhead."
    },
    {
      "vendor": "Bambu Lab",
      "type": "PPS-CF",
      "action": "prohibition",
      "slot": "ams",
      "ams_type_id": [1, 2, 3, 4, 5],
      "group": "cf_gf_ams",
      "priority": 2,
      "description": "%s does not support %s printing, as filament may break in the bent PTFE tube above the toolhead."
    },
    {
      "name_suffix": "PA6-GF",
      "nozzle_flows": ["High Flow"],
      "model_id": ["C11", "C12", "BL-P001"],
      "action": "prohibition",
      "description": "The current filament doesn't support the E3D high-flow nozzle and can't be used."
    },
    {
      "type": "PPS-CF",
      "nozzle_flows": ["High Flow"],
      "model_id":["C11", "C12", "BL-P001"],
      "action": "prohibition",
      "description": "The current filament doesn't support the E3D high-flow nozzle and can't be used."
    },
    {
      "type": "PLA-Aero",
      "nozzle_flows": ["High Flow"],
      "model_id":["C11", "C12", "BL-P001"],
      "action": "prohibition",
      "description": "The current filament doesn't support the E3D high-flow nozzle and can't be used."
    },
    {
      "type": "ASA-Aero",
      "nozzle_flows": ["High Flow"],
      "model_id":["C11", "C12", "BL-P001"],
      "action": "prohibition",
      "description": "The current filament doesn't support the E3D high-flow nozzle and can't be used."
    },
    {
      "name_suffix": "TPU 85A",
      "nozzle_flows": ["High Flow"],
      "model_id": ["C11", "C12", "BL-P001"],
      "action": "prohibition",
      "description": "The current filament doesn't support the E3D high-flow nozzle and can't be used."
    },
    {
      "name_suffix": "TPU 90A",
      "nozzle_flows": ["High Flow"],
      "model_id": ["C11", "C12", "BL-P001"],
      "action": "prohibition",
      "description": "The current filament doesn't support the E3D high-flow nozzle and can't be used."
    },
    {
      "white_fila_ids": ["GFU04", "GFU03", "GFU01", "GFU00", "GFU99"],
      "nozzle_flows": ["TPU High Flow"],
      "model_id": ["O1D", "O1E"],
      "action": "prohibition",
      "description": "The current filament doesn't support the TPU high-flow nozzle and can't be used."
    },
    {
      "white_names": ["2.85mm"],
      "nozzle_flows": ["TPU285"],
      "action": "prohibition",
      "hide_in": ["pre_check", "double_check"],
      "description": "%s is not supported by the current 2.85 mm TPU hotend. Please confirm the filament type and try again."
    },
    {
      "filament_id_vec": ["GFU06", "GFU97"],
      "nozzle_flows": ["Standard", "High Flow", "TPU High Flow", "E3D High Flow"],
      "action": "prohibition",
      "description": "%s is not supported by the current %s hotend. Please confirm the filament type and try again."
    },
    {
      "type": "TPU",
      "action": "prohibition",
      "calib_mode": "auto_pa",
      "model_id": ["O1D", "O1E", "N10"],
      "description": "Auto dynamic flow calibration is not supported for TPU filament."
    },
    {
      "name_suffix": "Bambu TPU 85A",
      "nozzle_flows": ["Standard", "High Flow"],
      "nozzle_diameters": [0.4],
      "model_id": ["O1D", "O1E"],
      "action": "prohibition",
      "description": "Bambu TPU 85A is not supported for printing with 0.4 mm Standard or High Flow nozzles."
    },
    {
      "types": ["TPU"],
      "action": "warning",
      "model_id":["N6"],
      "hide_in": ["double_check"],
      "description": "How to feed TPU filament on X2D.",
      "wiki": "https://e.bambulab.com/t?c=PAxXqQu2zBgvN3ea"
    },
    {
      "types": ["TPU", "TPU-AMS"],
      "action": "warning",
      "model_id":["N7"],
      "hide_in": ["double_check"],
      "description": "Special attention should be paid to the feeding method of TPU.",
      "wiki": "https://e.bambulab.com/t?c=blx2TDu3uoRdfyIx"
    },
    {
      "types": ["TPU"],
      "action": "warning",
      "model_id":["O1D"],
      "hide_in": ["double_check"],
      "description": "Special attention should be paid to the feeding method of TPU.",
      "wiki": "https://e.bambulab.com/t?c=fwWqpBg37Liel92N"
    },
    {
      "types": ["TPU"],
      "action": "warning",
      "model_id":["O1E"],
      "hide_in": ["double_check"],
      "description": "Special attention should be paid to the feeding method of TPU.",
      "wiki": "https://e.bambulab.com/t?c=fwWqpBg37Liel92N"
    },
    {
      "types": ["TPU"],
      "action": "warning",
      "model_id":["O1C2"],
      "hide_in": ["double_check"],
      "description": "Special attention should be paid to the feeding method of TPU.",
      "wiki": "https://e.bambulab.com/t?c=Db9YyP5qg3MHbSHD"
    },
    {
      "types": ["TPU"],
      "action": "warning",
      "model_id":["O1S"],
      "hide_in": ["double_check"],
      "description": "Special attention should be paid to the feeding method of TPU.",
      "wiki": "https://e.bambulab.com/t?c=L45sIEpzy1Wz0tsV"
    },
    {
      "types": ["TPU"],
      "action": "warning",
      "model_id":["N10"],
      "hide_in": ["double_check"],
      "description": "Special attention should be paid to the feeding method of TPU.",
      "wiki": "https://wiki.bambulab.com/zh/h3c/tpu-printing-guide"
    },
    {
      "types": ["TPU", "TPU-AMS"],
      "nozzle_flows": ["Standard", "High Flow", "TPU High Flow", "E3D High Flow"],
      "action": "warning",
      "description": "Please cold pull before printing TPU to avoid clogging. You may use cold pull maintenance on the printer."
    },
    {
      "type": "PVA",
      "action": "warning",
      "slot": "ams",
      "description": "Damp PVA will become flexible and get stuck inside AMS,please take care to dry it before use."
    },
    {
      "type": "PVA",
      "action": "warning",
      "slot": "ext",
      "description": "Damp PVA is flexible and may get stuck in extruder. Dry it before use."
    },
    {
      "type": "PPS-CF",
      "model_id":["O1S"],
      "action": "warning",
      "description": "PPS-CF is brittle and could break in bended PTFE tube above Toolhead.",
      "wiki": "https://e.bambulab.com/t?c=UC64kdlpHxN3Mb15"
    },
    {
      "type": "PPA-CF",
      "model_id":["O1S"],
      "action": "warning",
      "description": "PPA-CF is brittle and could break in bended PTFE tube above Toolhead.",
      "wiki": "https://e.bambulab.com/t?c=UC64kdlpHxN3Mb15"
    },
    {
      "type": "PPS-CF",
      "model_id":["N10"],
      "action": "warning",
      "slot": "ext",
      "description": "PPS-CF is brittle and could break in bended PTFE tube above Toolhead.",
      "wiki": "https://e.bambulab.com/t?c=UC64kdlpHxN3Mb15"
    },
    {
      "type": "PPA-CF",
      "model_id":["N10"],
      "action": "warning",
      "slot": "ext",
      "description": "PPA-CF is brittle and could break in bended PTFE tube above Toolhead.",
      "wiki": "https://e.bambulab.com/t?c=UC64kdlpHxN3Mb15"
    },
    {
      "type_suffix": "CF",
      "action": "warning",
      "slot": "ams",
      "ams_type_id": [1, 2, 3, 4, 5],
      "group": "cf_gf_ams",
      "priority": 0,
      "description": "Use %s in %s with caution, as it may break in the bent PTFE tube above the toolhead."
    },
    {
      "type_suffix": "GF",
      "action": "warning",
      "slot": "ams",
      "ams_type_id": [1, 2, 3, 4, 5],
      "group": "cf_gf_ams",
      "priority": 0,
      "description": "Use %s in %s with caution, as it may break in the bent PTFE tube above the toolhead."
    },
    {
      "vendor": "Bambu Lab",
      "type": "PLA",
      "name": "Bambu PLA Glow",
      "action": "warning",
      "slot": "ams",
      "group": "pla_glow_ams_feeder",
      "priority": 0,
      "description": "PLA Glow may wear the %s first stage feeder. Use an external spool instead."
    },
    {
      "vendor": "Bambu Lab",
      "type": "PLA",
      "name": "Bambu PLA Glow",
      "model_id": ["N10"],
      "action": "warning",
      "slot": "ams",
      "ams_type_id": [6],
      "group": "pla_glow_ams_feeder",
      "priority": 1,
      "description": "%s filament may wear the %s feed inlet, has high feeding resistance. We recommend an external spool.",
      "wiki_by_model": {
        "N10": "https://e.bambulab.com/t?c=ArsDpYcoaTkZgnn1"
      }
    },
    {
      "vendor": "Bambu Lab",
      "type": "PPA-CF",
      "action": "prohibition",
      "slot": "ams",
      "ams_type_id": [1, 2, 3, 4, 5],
      "group": "cf_gf_ams",
      "priority": 2,
      "description": "%s does not support %s printing, as filament may break in the bent PTFE tube above the toolhead."
    },
    {
      "types": ["PET-CF", "PA6-CF", "PA6-GF", "ASA-CF", "PAHT-CF", "PPS-CF", "PPA-CF"],
      "model_id": ["N10"],
      "action": "warning",
      "slot": "ams",
      "ams_type_id": [6],
      "group": "ams_6_7_cf_gf_feeding",
      "priority": 0,
      "description": "%s filament is brittle and has high feeding resistance. Use caution when loading it through %s."
    },
    {
      "vendor": "Bambu Lab",
      "type": "PPA-CF",
      "model_id": ["N10"],
      "action": "prohibition",
      "slot": "ams",
      "ams_type_id": [6],
      "group": "ams_6_7_cf_gf_feeding",
      "priority": 2,
      "description": "PPA-CF filament does not support %s feeding. Use an external spool instead."
    },
    {
      "type": "PC",
      "model_id": ["N10"],
      "action": "warning",
      "slot": "ams",
      "ams_type_id": [1, 2, 3, 4, 5, 6],
      "description": "%s filament is brittle. Use %s feeding with caution."
    },
    {
      "vendor": "Bambu Lab",
      "type": "PLA",
      "name": "Bambu PLA Translucent",
      "model_id": ["N10"],
      "action": "warning",
      "slot": "ams",
      "ams_type_id": [6],
      "description": "%s filament is brittle. Use %s feeding with caution."
    },
    {
      "type": "PLA",
      "name_suffix": "PLA Silk",
      "action": "warning",
      "slot": "ams",
      "has_filament_switch": true,
      "group": "fila_switcher",
      "priority": 5,
      "description": "%s may fail to load or unload due to the Filament Track Switch.",
      "wiki": "https://e.bambulab.com/t?c=s0CgMOrctZiPablB"
    },
    {
      "name_suffix": "PC FR",
      "nozzle_flows": ["High Flow"],
      "model_id": ["C11", "C12", "BL-P001"],
      "action": "warning",
      "description": "Default settings may affect print quality. Adjust as needed for best results.",
      "wiki": "https://wiki.bambulab.com/en/accessories/e3d-hotend"
    },
    {
      "name_suffix": "PLA Silk",
      "nozzle_flows": ["High Flow"],
      "model_id": ["C11", "C12", "BL-P001"],
      "action": "warning",
      "description": "Default settings may affect print quality. Adjust as needed for best results.",
      "wiki": "https://wiki.bambulab.com/en/accessories/e3d-hotend"
    },
    {
      "name_suffix": "Support For PA/PET",
      "nozzle_flows": ["High Flow"],
      "model_id": ["C11", "C12", "BL-P001"],
      "action": "warning",
      "description": "Default settings may affect print quality. Adjust as needed for best results.",
      "wiki": "https://wiki.bambulab.com/en/accessories/e3d-hotend"
    },
    {
      "name_suffix": "PVA",
      "nozzle_flows": ["High Flow"],
      "model_id": ["C11", "C12", "BL-P001"],
      "action": "warning",
      "description": "Default settings may affect print quality. Adjust as needed for best results.",
      "wiki": "https://wiki.bambulab.com/en/accessories/e3d-hotend"
    },
    {
      "name_suffix": "Support For PLA",
      "nozzle_flows": ["High Flow"],
      "model_id": ["C11", "C12", "BL-P001"],
      "action": "warning",
      "description": "Default settings may affect print quality. Adjust as needed for best results.",
      "wiki": "https://wiki.bambulab.com/en/accessories/e3d-hotend"
    },
    {
      "name_suffix": "Support For PLA/PETG",
      "nozzle_flows": ["High Flow"],
      "model_id": ["C11", "C12", "BL-P001"],
      "action": "warning",
      "description": "Default settings may affect print quality. Adjust as needed for best results.",
      "wiki": "https://wiki.bambulab.com/en/accessories/e3d-hotend"
    },
    {
      "name_suffix": "Support for ABS",
      "nozzle_flows": ["High Flow"],
      "model_id": ["C11", "C12", "BL-P001"],
      "action": "warning",
      "description": "Default settings may affect print quality. Adjust as needed for best results.",
      "wiki": "https://wiki.bambulab.com/en/accessories/e3d-hotend"
    },
    {
      "type_suffix": "CF",
      "nozzle_flows": ["High Flow"],
      "nozzle_diameters": [ 0.4 ],
      "model_id": ["O1D", "O1S", "O1E", "O1C", "O1C2", "N7", "N10"],
      "action": "warning",
      "slot": "ext",
      "description": "%s has a risk of nozzle clogging when using 0.4mm high-flow nozzles. Use with caution."
    },
    {
      "name_suffix": "PA6-GF",
      "nozzle_flows": ["High Flow"],
      "nozzle_diameters": [ 0.4 ],
      "model_id": ["O1D", "O1S", "O1E", "O1C", "O1C2", "N7", "N6", "N10"],
      "action": "warning",
      "slot": "ext",
      "description": "%s has a risk of nozzle clogging when using 0.4mm high-flow nozzles. Use with caution."
    },
    {
      "type_suffix": "CF",
      "nozzle_flows": ["High Flow"],
      "nozzle_diameters": [ 0.4 ],
      "model_id": ["O1D", "O1S", "O1E", "O1C", "O1C2", "N7", "N6", "N10"],
      "action": "warning",
      "slot": "ams",
      "description": "%s filaments are hard and brittle and could break in AMS, and there is also a risk of nozzle clogging when using 0.4mm high-flow nozzles. Use with caution."
    },
    {
      "type_suffix": "GF",
      "nozzle_flows": ["High Flow"],
      "nozzle_diameters": [ 0.4 ],
      "model_id": ["O1D", "O1S", "O1E", "O1C", "O1C2", "N7", "N6", "N10"],
      "action": "warning",
      "slot": "ams",
      "group": "cf_gf_ams",
      "priority": 1,
      "description": "%s filaments are hard and brittle and could break in AMS, and there is also a risk of nozzle clogging when using 0.4mm high-flow nozzles. Use with caution."
    },
    {
      "name_suffix": "PA6-GF",
      "nozzle_flows": ["High Flow"],
      "nozzle_diameters": [ 0.4 ],
      "model_id": ["O1D", "O1S", "O1E", "O1C", "O1C2", "N7", "N6", "N10"],
      "action": "warning",
      "slot": "ams",
      "group": "cf_gf_ams",
      "priority": 1,
      "description": "%s filaments are hard and brittle and could break in AMS, and there is also a risk of nozzle clogging when using 0.4mm high-flow nozzles. Use with caution."
    },
    {
      "name_suffix": "TPU 85A",
      "nozzle_flows": ["High Flow"],
      "nozzle_diameters": [ 0.4, 0.6, 0.8 ],
      "model_id": ["O1D", "O1S", "O1E", "O1C", "O1C2", "N7", "N6", "N10"],
      "action": "warning",
      "slot": "ext",
      "description": "%s has a risk of nozzle clogging when using 0.4, 0.6, 0.8mm high-flow nozzles. Use with caution."
    },
    {
      "name_suffix": "TPU 90A",
      "nozzle_flows": ["High Flow"],
      "nozzle_diameters": [ 0.4, 0.6, 0.8 ],
      "model_id": ["O1D", "O1S", "O1E", "O1C", "O1C2", "N7", "N6", "N10"],
      "action": "warning",
      "slot": "ext",
      "description": "%s has a risk of nozzle clogging when using 0.4, 0.6, 0.8mm high-flow nozzles. Use with caution."
    },
    {
      "vendor": "Bambu Lab",
      "type": "PLA",
      "name": "Bambu PLA Galaxy",
      "nozzle_flows": ["Standard"],
      "nozzle_diameters": [ 0.2 ],
      "model_id": ["N10"],
      "action": "warning",
      "description": "%s filament has a higher risk of clogging when printed with a 0.2mm hotend. Use another compatible hotend before printing."
    },
    {
      "model_id": ["N6"],
      "extruder_id": [0],
      "filament_id_vec": ["GFB00", "GFB01", "GFB02", "GFT01", "GFG00", "GFG02"],
      "action": "warning",
      "description": "%s is used with the auxiliary extruder and may impact print quality.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "extruder_id": [1],
      "filament_id_vec": ["GFB02", "GFA11"],
      "nozzle_flows": ["Standard"],
      "nozzle_diameters": [0.6, 0.8],
      "action": "warning",
      "description": "%s used with a standard %s nozzle may cause oozing.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "extruder_id": [1],
      "filament_id_vec": ["GFB02", "GFA11"],
      "nozzle_flows": ["High Flow"],
      "nozzle_diameters": [0.6, 0.8],
      "action": "warning",
      "description": "%s used with a high-flow %s nozzle may cause oozing.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "extruder_id": [1],
      "filament_id_vec": ["GFB51", "GFN05", "GFN08", "GFN04", "GFT01"],
      "nozzle_flows": ["High Flow"],
      "nozzle_diameters": [0.4],
      "action": "warning",
      "description": "%s used with a high-flow %s nozzle may cause a clog.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "extruder_id": [0],
      "filament_id_vec": ["GFB51", "GFN05", "GFG50", "GFS03", "GFU02", "GFA05"],
      "action": "critical_warning",
      "description": "%s is used with the auxiliary extruder and carries a higher risk, which may result in print failure or equipment malfunction.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "extruder_id": [1],
      "filament_id_vec": ["GFG01"],
      "nozzle_flows": ["Standard"],
      "nozzle_diameters": [0.2],
      "action": "warning",
      "description": "%s used with a standard %s nozzle may affect print quality.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "extruder_id": [1],
      "filament_id_vec": ["GFA05", "GFA06"],
      "nozzle_flows": ["Standard"],
      "nozzle_diameters": [0.6, 0.8],
      "action": "warning",
      "description": "%s used with a standard %s nozzle may affect print quality.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "extruder_id": [0],
      "filament_id_vec": ["GFG01", "GFA00", "GFA13", "GFA15", "GFA18", "GFA01", "GFA02", "GFA09", "GFA10", "GFA17", "GFS02", "GFS05"],
      "nozzle_flows": ["Standard"],
      "nozzle_diameters": [0.2],
      "action": "warning",
      "description": "When using an auxiliary extruder, printing %s with a standard %s nozzle may affect model quality.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "extruder_id": [0],
      "filament_id_vec": ["GFA06"],
      "nozzle_flows": ["Standard"],
      "nozzle_diameters": [0.2, 0.6, 0.8],
      "action": "warning",
      "description": "When using an auxiliary extruder, printing %s with a standard %s nozzle may affect model quality.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "extruder_id": [1],
      "filament_id_vec": ["GFG50"],
      "nozzle_flows": ["High Flow"],
      "nozzle_diameters": [0.4],
      "action": "warning",
      "description": "%s used with a high-flow %s nozzle may result in poor quality in overhang and bridge areas of the model.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "extruder_id": [0],
      "filament_id_vec": ["GFA11", "GFN06", "GFU04", "GFU03", "GFU01", "GFU00"],
      "action": "prohibition",
      "description": "%s is only supported for printing with the main extruder.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "extruder_id": [1],
      "filament_id_vec": ["GFA15", "GFA17"],
      "nozzle_flows": ["Standard"],
      "nozzle_diameters": [0.2],
      "action": "warning",
      "description": "%s used with a standard %s nozzle may lead to difficult extrusion.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "extruder_id": [1],
      "filament_id_vec": ["GFA05", "GFA06"],
      "nozzle_flows": ["High Flow"],
      "nozzle_diameters": [0.6, 0.8],
      "action": "warning",
      "description": "%s used with a high-flow %s nozzle may affect print quality.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "extruder_id": [0],
      "filament_id_vec": ["GFA06"],
      "nozzle_flows": ["High Flow"],
      "nozzle_diameters": [0.6, 0.8],
      "action": "warning",
      "description": "When using an auxiliary extruder, printing %s with a high-flow %s nozzle may affect model quality.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "extruder_id": [1],
      "filament_id_vec": ["GFA50", "GFN06"],
      "nozzle_flows": ["High Flow"],
      "nozzle_diameters": [0.4],
      "action": "warning",
      "description": "%s used with a high-flow %s nozzle may lead to difficult extrusion.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "extruder_id": [1],
      "filament_id_vec": ["GFU04"],
      "nozzle_flows": ["High Flow"],
      "nozzle_diameters": [0.6, 0.8],
      "action": "warning",
      "description": "%s used with a high-flow %s nozzle may lead to difficult extrusion.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "extruder_id": [1],
      "filament_id_vec": ["GFU03"],
      "nozzle_flows": ["High Flow"],
      "nozzle_diameters": [0.4, 0.6, 0.8],
      "action": "warning",
      "description": "%s used with a high-flow %s nozzle may lead to difficult extrusion.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "extruder_id": [0],
      "filament_id_vec": ["GFA50"],
      "nozzle_flows": ["High Flow"],
      "nozzle_diameters": [0.4],
      "action": "warning",
      "description": "When using an auxiliary extruder, printing %s with a high-flow %s nozzle may cause a clog.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "has_filament_switch": true,
      "slot": "ams",
      "filament_id_vec": ["GFA06", "GFA05"],
      "action": "warning",
      "group": "fila_switcher",
      "priority": 10,
      "description": "Affected by the Filament Track Switch, %s may fail to load or unload.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "has_filament_switch": true,
      "slot": "ams",
      "filament_id_vec": ["GFA12", "GFA50", "GFS06"],
      "nozzle_diameters": [0.4, 0.6, 0.8],
      "action": "warning",
      "group": "fila_switcher",
      "priority": 10,
      "description": "Affected by the Filament Track Switch, %s may fail to load or unload.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "has_filament_switch": true,
      "slot": "ams",
      "extruder_id": [1],
      "filament_id_vec": ["GFA11"],
      "nozzle_diameters": [0.4, 0.6, 0.8],
      "action": "critical_warning",
      "group": "fila_switcher",
      "priority": 30,
      "description": "Affected by the Filament Track Switch, %s may break inside the filament tube.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "has_filament_switch": true,
      "slot": "ams",
      "filament_id_vec": ["GFB50", "GFB02", "GFB51", "GFC00", "GFU02"],
      "nozzle_diameters": [0.4, 0.6, 0.8],
      "action": "critical_warning",
      "group": "fila_switcher",
      "priority": 30,
      "description": "Affected by the Filament Track Switch, %s may break inside the filament tube.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "has_filament_switch": true,
      "slot": "ams",
      "filament_id_vec": ["GFN05", "GFN06"],
      "action": "prohibition",
      "group": "cf_gf_ams",
      "priority": 10,
      "description": "Affected by the Filament Track Switch, %s cannot be used. Use an external spool instead.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "has_filament_switch": true,
      "slot": "ams",
      "filament_id_vec": ["GFA15"],
      "nozzle_flows": ["Standard"],
      "nozzle_diameters": [0.2],
      "action": "prohibition",
      "group": "fila_switcher",
      "priority": 50,
      "description": "Affected by the Filament Track Switch, %s cannot be used. Use an external spool instead.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    },
    {
      "model_id": ["N6"],
      "filament_id_vec": ["GFA12"],
      "nozzle_flows": ["Standard"],
      "nozzle_diameters": [0.2],
      "action": "prohibition",
      "description": "%s is not supported with a standard %s nozzle.",
      "wiki": "https://wiki.bambulab.com/zh/x2d/manual/filament-compatibility"
    }
  ]
}