{
    "type": "machine",
    "name": "Bambu Lab H3C 0.4 nozzle",
    "inherits": "fdm_bbl_3dp_001_common",
    "from": "system",
    "setting_id": "GM060",
    "instantiation": "true",
    "nozzle_diameter": [
        "0.4"
    ],
    "printer_model": "Bambu Lab H3C",
    "farthest_point_timelapse": "1",
    "printer_variant": "0.4",
    "ams_nozzle_idx": [
        "0"
    ],
    "bed_exclude_area": [],
    "bed_temperature_formula": "by_highest_temp",
    "default_filament_profile": [
        "Bambu PLA Basic @BBL H3C"
    ],
    "default_print_profile": "0.20mm Standard @BBL H3C",
    "default_wipe_tower_pos": "1x0",
    "deretract_speed_extruder_change": [
        "30",
        "30",
        "30"
    ],
    "deretraction_speed": [
        "30",
        "30",
        "30"
    ],
    "enable_long_retraction_when_cut": "2",
    "enable_pre_heating": "1",
    "extruder_clearance_dist_to_rod": "56",
    "extruder_clearance_height_to_lid": "172",
    "extruder_clearance_height_to_rod": "26",
    "extruder_clearance_max_radius": "95",
    "extruder_clearance_radius": "30",
    "extruder_max_nozzle_count": [
        "9"
    ],
    "default_nozzle_volume_type": [
        "Standard",
        "Standard",
        "Standard",
        "Standard",
        "Standard",
        "Standard",
        "Standard",
        "TPU285",
        "Standard"
    ],
    "extruder_variant_list": [
        "Direct Drive Standard,Direct Drive High Flow,Direct Drive TPU285"
    ],
    "aux_fan_independent_control": "1",
    "aux_fan_standard_side": "right",
    "fan_direction": "left",
    "handle_hotend_as_extruder": "1",
    "hotend_cooling_rate": [
        "2",
        "2",
        "2"
    ],
    "hotend_cooling_rate_on_rack": [
        "0.8",
        "0.8",
        "0.8"
    ],
    "hotend_heating_rate": [
        "7.5",
        "7.5",
        "7.5"
    ],
    "include": [
        "Bambu Lab H3C 0.4 nozzle template machine_start_gcode",
        "Bambu Lab H3C 0.4 nozzle template machine_end_gcode",
        "Bambu Lab H3C 0.4 nozzle template time_lapse_gcode",
        "Bambu Lab H3C 0.4 nozzle template change_filament_gcode",
        "Bambu Lab H3C 0.4 nozzle template layer_change_gcode"
    ],
    "long_retractions_when_cut": [
        "0",
        "0",
        "0"
    ],
    "machine_load_filament_time": "15",
    "machine_max_acceleration_e": [
        "5000",
        "5000",
        "5000",
        "5000",
        "5000",
        "5000"
    ],
    "machine_max_acceleration_extruding": [
        "25000",
        "25000",
        "25000",
        "25000",
        "25000",
        "25000"
    ],
    "machine_max_acceleration_retracting": [
        "5000",
        "5000",
        "5000",
        "5000",
        "5000",
        "5000"
    ],
    "machine_max_acceleration_travel": [
        "9000",
        "9000",
        "9000",
        "9000",
        "9000",
        "9000"
    ],
    "machine_max_acceleration_x": [
        "25000",
        "25000",
        "25000",
        "25000",
        "25000",
        "25000"
    ],
    "machine_max_acceleration_y": [
        "25000",
        "25000",
        "25000",
        "25000",
        "25000",
        "25000"
    ],
    "machine_max_acceleration_z": [
        "1000",
        "1000",
        "1000",
        "1000",
        "1000",
        "1000"
    ],
    "machine_max_jerk_e": [
        "2.5",
        "2.5",
        "2.5",
        "2.5",
        "2.5",
        "2.5"
    ],
    "machine_max_jerk_x": [
        "9",
        "9",
        "9",
        "9",
        "9",
        "9"
    ],
    "machine_max_jerk_y": [
        "9",
        "9",
        "9",
        "9",
        "9",
        "9"
    ],
    "machine_max_jerk_z": [
        "3",
        "3",
        "3",
        "3",
        "3",
        "3"
    ],
    "machine_max_speed_e": [
        "30",
        "30",
        "30",
        "30",
        "30",
        "30"
    ],
    "machine_max_speed_x": [
        "1400",
        "1400",
        "1400",
        "1400",
        "1400",
        "1400"
    ],
    "machine_max_speed_y": [
        "1400",
        "1400",
        "1400",
        "1400",
        "1400",
        "1400"
    ],
    "machine_max_speed_z": [
        "35",
        "35",
        "35",
        "35",
        "35",
        "35"
    ],
    "machine_min_extruding_rate": [
        "0"
    ],
    "machine_min_travel_rate": [
        "0"
    ],
    "machine_switch_extruder_time": "4",
    "machine_unload_filament_time": "28",
    "nozzle_flush_dataset": [
        "1",
        "2",
        "2"
    ],
    "nozzle_volume": [
        "125.9",
        "125.9",
        "125.9"
    ],
    "printable_area": [
        "0x0",
        "330x0",
        "330x320",
        "0x320"
    ],
    "printable_height": "325",
    "printer_extruder_id": [
        "1",
        "1",
        "1"
    ],
    "printer_extruder_variant": [
        "Direct Drive Standard",
        "Direct Drive High Flow",
        "Direct Drive TPU285"
    ],
    "retract_before_wipe": [
        "0%",
        "0%",
        "0%"
    ],
    "retract_length_toolchange": [
        "2",
        "2",
        "2"
    ],
    "retract_lift_above": [
        "0",
        "0",
        "0"
    ],
    "retract_lift_below": [
        "339",
        "339",
        "339"
    ],
    "retract_restart_extra": [
        "0",
        "0",
        "0"
    ],
    "retract_restart_extra_toolchange": [
        "0",
        "0",
        "0"
    ],
    "retract_when_changing_layer": [
        "1",
        "1",
        "1"
    ],
    "retraction_distances_when_cut": [
        "18",
        "18",
        "18"
    ],
    "retraction_length": [
        "0.8",
        "0.8",
        "0.8"
    ],
    "retraction_minimum_travel": [
        "1",
        "1",
        "1"
    ],
    "retraction_speed": [
        "30",
        "30",
        "30"
    ],
    "support_chamber_temp_control": "1",
    "sync_auxiliary_fan_to_second_fan": "0",
    "wipe": [
        "1",
        "1",
        "1"
    ],
    "wipe_distance": [
        "2",
        "2",
        "2"
    ],
    "z_hop": [
        "0.4",
        "0.4",
        "0.4"
    ],
    "z_hop_types": [
        "Auto Lift",
        "Auto Lift",
        "Auto Lift"
    ],
    "upward_compatible_machine": [
        "Bambu Lab H2S 0.4 nozzle",
        "Bambu Lab A2L 0.4 nozzle"
    ]
}