AddressBookPageRight-click to edit address or labelCreate a new addressCreate a new address&NewCopy the currently selected address to the system clipboardCopy the currently selected address to the system clipboard&CopyC&loseDelete the currently selected address from the listDelete the currently selected address from the listEnter address or label to searchExport the data in the current tab to a fileExport the data in the current tab to a file&Export&Export&Delete&DeleteChoose the address to send coins toChoose the address to receive coins withC&hooseThese are your Bitcoin addresses for sending payments. Always check the amount and the receiving address before sending coins.These are your Bitcoin addresses for receiving payments. Use the 'Create new receiving address' button in the receive tab to create new addresses.
Signing is only possible with addresses of the type 'legacy'.&Copy AddressCopy &Label&EditExport Address ListComma separated fileExpanded name of the CSV file format. See: https://en.wikipedia.org/wiki/Comma-separated_values.There was an error trying to save the address list to %1. Please try again.An error message. %1 is a stand-in argument for the name of the file we attempted to save to.Sending addresses - %1Receiving addresses - %1Exporting FailedAddressTableModelLabelAddress(no label)AskPassphraseDialogPassphrase DialogPassphrase DialogEnter passphraseEnter passphraseNew passphraseNew passphraseRepeat new passphraseRepeat new passphraseShow passphraseEncrypt walletThis operation needs your wallet passphrase to unlock the wallet.Unlock walletChange passphraseConfirm wallet encryptionWarning: If you encrypt your wallet and lose your passphrase, you will <b>LOSE ALL OF YOUR BITCOINS</b>!Are you sure you wish to encrypt your wallet?Wallet encryptedEnter the new passphrase for the wallet.<br/>Please use a passphrase of <b>ten or more random characters</b>, or <b>eight or more words</b>.Enter the old passphrase and new passphrase for the wallet.ContinueBackRemember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer.Wallet to be encryptedYour wallet is about to be encrypted. Your wallet is now encrypted. IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet.Wallet encryption failedWallet encryption failed due to an internal error. Your wallet was not encrypted.The supplied passphrases do not match.Wallet unlock failedThe passphrase entered for the wallet decryption was incorrect.The passphrase entered for the wallet decryption is incorrect. It contains a null character (ie - a zero byte). If the passphrase was set with a version of this software prior to 25.0, please try again with only the characters up to — but not including — the first null character. If this is successful, please set a new passphrase to avoid this issue in the future.Wallet passphrase was successfully changed.Passphrase change failedThe old passphrase entered for the wallet decryption is incorrect. It contains a null character (ie - a zero byte). If the passphrase was set with a version of this software prior to 25.0, please try again with only the characters up to — but not including — the first null character.Warning: The Caps Lock key is on!BanTableModelIP/NetmaskBanned UntilBitcoinApplicationSettings file %1 might be corrupt or invalid.Runaway exceptionA fatal error occurred. %1 can no longer continue safely and will quit.Internal errorAn internal error occurred. %1 will attempt to continue safely. This is an unexpected bug which can be reported as described below.BitcoinGUI&Overview&OverviewShow general overview of walletShow general overview of wallet&Transactions&TransactionsBrowse transaction historyBrowse transaction historyE&xitE&xitQuit applicationQuit application&About %1Show information about %1About &QtAbout &QtShow information about QtShow information about QtModify configuration options for %1Create a new wallet&MinimizeWallet:Network activity disabled.A substring of the tooltip.Proxy is <b>enabled</b>: %1Send coins to a Bitcoin addressSend coins to a Bitcoin addressBackup wallet to another locationBackup wallet to another locationChange the passphrase used for wallet encryptionChange the passphrase used for wallet encryption&Send&Send&Receive&Receive&Options…&Encrypt Wallet…Encrypt the private keys that belong to your walletEncrypt the private keys that belong to your wallet&Backup Wallet…&Change Passphrase…Sign &message…Sign messages with your Bitcoin addresses to prove you own themSign messages with your Bitcoin addresses to prove you own them&Verify message…Verify messages to ensure they were signed with specified Bitcoin addressesVerify messages to ensure they were signed with specified Bitcoin addresses&Load PSBT from file…Open &URI…Close Wallet…Create Wallet…Close All Wallets…&File&File&Settings&Settings&Help&HelpTabs toolbarTabs toolbarSyncing Headers (%1%)…Synchronizing with network…Indexing blocks on disk…Processing blocks on disk…Connecting to peers…Request payments (generates QR codes and bitcoin: URIs)Show the list of used sending addresses and labelsShow the list of used receiving addresses and labels&Command-line optionsProcessed %n block(s) of transaction history.Processed %n block of transaction history.Processed %n blocks of transaction history.%1 behind%1 behindCatching up…Last received block was generated %1 ago.Last received block was generated %1 ago.Transactions after this will not yet be visible.Transactions after this will not yet be visible.ErrorErrorWarningWarningInformationInformationUp to dateUp to dateCtrl+QLoad Partially Signed Bitcoin TransactionLoad PSBT from &clipboard…Load Partially Signed Bitcoin Transaction from clipboardNode windowOpen node debugging and diagnostic console&Sending addresses&Receiving addressesOpen a bitcoin: URIOpen WalletOpen a walletClose walletRestore Wallet…Name of the menu item that restores wallet from a backup file.Restore a wallet from a backup fileStatus tip for Restore Wallet menu itemClose all walletsMigrate WalletMigrate a walletShow the %1 help message to get a list with possible Bitcoin command-line options&Mask valuesMask the values in the Overview tabNo wallets availableWallet DataName of the wallet data file format.Load Wallet BackupThe title for Restore Wallet File WindowsRestore WalletTitle of pop-up window shown when the user is attempting to restore a wallet.Wallet NameLabel of the input field where the name of the wallet is entered.&Window&WindowCtrl+MZoomMain Window%1 client&HideS&how%n active connection(s) to Bitcoin network.A substring of the tooltip.%n active connection to Bitcoin network.%n active connections to Bitcoin network.Click for more actions.A substring of the tooltip. "More actions" are available via the context menu.Show Peers tabA context menu item. The "Peers tab" is an element of the "Node window".Disable network activityA context menu item.Enable network activityA context menu item. The network activity was disabled previously.Pre-syncing Headers (%1%)…Error creating walletCannot create new wallet, the software was compiled without sqlite support (required for descriptor wallets)Error: %1Warning: %1Date: %1
Amount: %1
Wallet: %1
Type: %1
Label: %1
Address: %1
Sent transactionSent transactionIncoming transactionIncoming transactionHD key generation is <b>enabled</b>HD key generation is <b>disabled</b>Private key <b>disabled</b>Wallet is <b>encrypted</b> and currently <b>unlocked</b>Wallet is <b>encrypted</b> and currently <b>unlocked</b>Wallet is <b>encrypted</b> and currently <b>locked</b>Wallet is <b>encrypted</b> and currently <b>locked</b>Original message:CoinControlDialogCoin SelectionQuantity:Bytes:Amount:Fee:After Fee:Change:(un)select allTree modeList modeAmountAmountReceived with labelReceived with addressDateDateConfirmationsConfirmedConfirmedCopy amount&Copy addressCopy &labelCopy &amountCopy transaction &ID and output indexL&ock unspent&Unlock unspentCopy quantityCopy feeCopy after feeCopy bytesCopy change(%1 locked)Can vary +/- %1 satoshi(s) per input.(no label)change from %1 (%2)(change)CreateWalletActivityCreate WalletTitle of window indicating the progress of creation of a new wallet.Creating Wallet <b>%1</b>…Descriptive text of the create wallet progress window which indicates to the user which wallet is currently being created.Create wallet failedCreate wallet warningCan't list signersToo many external signers foundCreateWalletDialogCreate WalletYou are one step away from creating your new wallet!Please provide a name and, if desired, enable any advanced optionsWallet NameWalletEncrypt the wallet. The wallet will be encrypted with a passphrase of your choice.Encrypt WalletAdvanced OptionsDisable private keys for this wallet. Wallets with private keys disabled will have no private keys and cannot have an HD seed or imported private keys. This is ideal for watch-only wallets.Disable Private KeysMake a blank wallet. Blank wallets do not initially have private keys or scripts. Private keys and addresses can be imported, or an HD seed can be set, at a later time.Make Blank WalletUse an external signing device such as a hardware wallet. Configure the external signer script in wallet preferences first.External signerCreateCompiled without external signing support (required for external signing)"External signing" means using devices such as hardware wallets.EditAddressDialogEdit AddressEdit Address&Label&LabelThe label associated with this address list entryThe address associated with this address list entry. This can only be modified for sending addresses.&Address&AddressNew sending addressEdit receiving addressEdit sending addressThe entered address "%1" is not a valid Bitcoin address.Address "%1" already exists as a receiving address with label "%2" and so cannot be added as a sending address.The entered address "%1" is already in the address book with label "%2".Could not unlock wallet.New key generation failed.FreespaceCheckerA new data directory will be created.A new data directory will be created.namenameDirectory already exists. Add %1 if you intend to create a new directory here.Directory already exists. Add %1 if you intend to create a new directory here.Path already exists, and is not a directory.Path already exists, and is not a directory.Cannot create data directory here.Cannot create data directory here.HelpMessageDialogversionversionAbout %1Command-line optionsIntroWelcomeWelcomeWelcome to %1.As this is the first time the program is launched, you can choose where %1 will store its data.Limit block chain storage toReverting this setting requires re-downloading the entire blockchain. It is faster to download the full chain first and prune it later. Disables some advanced features. GBThis initial synchronisation is very demanding, and may expose hardware problems with your computer that had previously gone unnoticed. Each time you run %1, it will continue downloading where it left off.When you click OK, %1 will begin to download and process the full %4 block chain (%2 GB) starting with the earliest transactions in %3 when %4 initially launched.If you have chosen to limit block chain storage (pruning), the historical data must still be downloaded and processed, but will be deleted afterward to keep your disk usage low.Use the default data directoryUse the default data directoryUse a custom data directory:Use a custom data directory:BitcoinBitcoin%n GB of space available%n GB of space available%n GB of space available(of %n GB needed)(of %n GB needed)(of %n GB needed)(%n GB needed for full chain)(%n GB needed for full chain)(%n GB needed for full chain)Choose data directoryAt least %1 GB of data will be stored in this directory, and it will grow over time.Approximately %1 GB of data will be stored in this directory.(sufficient to restore backups %n day(s) old)Explanatory text on the capability of the current prune target.(sufficient to restore backups %n day old)(sufficient to restore backups %n days old)%1 will download and store a copy of the Bitcoin block chain.The wallet will also be stored in this directory.Error: Specified data directory "%1" cannot be created.ErrorErrorLoadWalletsActivityLoad WalletsTitle of progress window which is displayed when wallets are being loaded.Loading wallets…Descriptive text of the load wallets progress window which indicates to the user that wallets are currently being loaded.MigrateWalletActivityMigrate walletAre you sure you wish to migrate the wallet <i>%1</i>?Migrating the wallet will convert this wallet to one or more descriptor wallets. A new wallet backup will need to be made.
If this wallet contains any watchonly scripts, a new wallet will be created which contains those watchonly scripts.
If this wallet contains any solvable but not watched scripts, a different and new wallet will be created which contains those scripts.
The migration process will create a backup of the wallet before migrating. This backup file will be named <wallet name>-<timestamp>.legacy.bak and can be found in the directory for this wallet. In the event of an incorrect migration, the backup can be restored with the "Restore Wallet" functionality.Migrate WalletMigrating Wallet <b>%1</b>…The wallet '%1' was migrated successfully.Watchonly scripts have been migrated to a new wallet named '%1'.Solvable but not watched scripts have been migrated to a new wallet named '%1'.Migration failedMigration SuccessfulModalOverlayFormFormRecent transactions may not yet be visible, and therefore your wallet's balance might be incorrect. This information will be correct once your wallet has finished synchronizing with the bitcoin network, as detailed below.Attempting to spend bitcoins that are affected by not-yet-displayed transactions will not be accepted by the network.Number of blocks leftUnknown…calculating…Last block timeLast block timeProgressProgress increase per hourEstimated time left until syncedHideEsc%1 is currently syncing. It will download headers and blocks from peers and validate them until reaching the tip of the block chain.Unknown. Syncing Headers (%1, %2%)…Unknown. Pre-syncing Headers (%1, %2%)…OpenURIDialogOpen bitcoin URIURI:Paste address from clipboardTooltip text for button that allows you to paste an address that is in your clipboard.Paste address from clipboardOpenWalletActivityOpen wallet failedOpen wallet warningOpen WalletTitle of window indicating the progress of opening of a wallet.Opening Wallet <b>%1</b>…Descriptive text of the open wallet progress window which indicates to the user which wallet is currently being opened.OptionsDialogOptionsOptions&Main&MainAutomatically start %1 after logging in to the system.&Start %1 on system loginEnabling pruning significantly reduces the disk space required to store transactions. All blocks are still fully validated. Reverting this setting requires re-downloading the entire blockchain.Maximum database cache size. Make sure you have enough RAM. A larger cache can contribute to faster sync, after which the benefit is less pronounced for most use cases. Lowering the cache size will reduce memory usage. Unused mempool memory is shared for this cache.Tooltip text for Options window setting that sets the size of the database cache. Explains the corresponding effects of increasing/decreasing this value.Size of &database cacheNumber of script &verification threadsFull path to a %1 compatible script (e.g. C:\Downloads\hwi.exe or /Users/you/Downloads/hwi.py). Beware: malware can steal your coins!Automatically open the Bitcoin client port on the router. This only works when your router supports PCP or NAT-PMP and it is enabled. The external port could be random.Map port using PCP or NA&T-PMPIP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1)Shows if the supplied default SOCKS5 proxy is used to reach peers via this network type.Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Exit in the menu.Font in the Overview tab: Options set in this dialog are overridden by the command line:Open the %1 configuration file from the working directory.Open Configuration FileReset all client options to default.Reset all client options to default.&Reset Options&Reset Options&Network&NetworkPrune &block storage toGBReverting this setting requires re-downloading the entire blockchain.MiBSet the number of script verification threads. Negative values correspond to the number of cores you want to leave free to the system.Tooltip text for Options window setting that sets the number of script verification threads. Explains that negative values mean to leave these many cores free to the system.(0 = auto, <0 = leave that many cores free)This allows you or a third party tool to communicate with the node through command-line and JSON-RPC commands.Tooltip text for Options window setting that enables the RPC server.Enable R&PC serverAn Options window setting to enable the RPC server.W&alletWhether to set subtract fee from amount as default or not.Tooltip text for Options window setting that sets subtracting the fee from a sending amount as default.Subtract &fee from amount by defaultAn Options window setting to set subtracting the fee from a sending amount as default.ExpertEnable coin &control featuresIf you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed.&Spend unconfirmed changeEnable &PSBT controlsAn options window setting to enable PSBT controls.Whether to show PSBT controls.Tooltip text for options window setting that enables PSBT controls.External Signer (e.g. hardware wallet)&External signer script pathAccept connections from outside.Allow incomin&g connectionsConnect to the Bitcoin network through a SOCKS5 proxy.&Connect through SOCKS5 proxy (default proxy):Proxy &IP:Proxy &IP:&Port:&Port:Port of the proxy (e.g. 9050)Port of the proxy (e.g. 9050)Used for reaching peers via:IPv4IPv6Tor&Window&WindowShow the icon in the system tray.&Show tray iconShow only a tray icon after minimizing the window.Show only a tray icon after minimizing the window.&Minimize to the tray instead of the taskbar&Minimize to the tray instead of the taskbarM&inimize on closeM&inimize on close&Display&DisplayUser Interface &language:User Interface &language:The user interface language can be set here. This setting will take effect after restarting %1.&Unit to show amounts in:&Unit to show amounts in:Choose the default subdivision unit to show in the interface and when sending coins.Choose the default subdivision unit to show in the interface and when sending coins.Third-party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |.&Third-party transaction URLsWhether to show coin control features or not.Connect to the Bitcoin network through a separate SOCKS5 proxy for Tor onion services.Use separate SOCKS&5 proxy to reach peers via Tor onion services:&OK&OK&Cancel&CancelCompiled without external signing support (required for external signing)"External signing" means using devices such as hardware wallets.defaultdefaultnoneConfirm options resetWindow title text of pop-up window shown when the user has chosen to reset options.Confirm options resetClient restart required to activate changes.Text explaining that the settings changed will not come into effect until the client is restarted.Current settings will be backed up at "%1".Text explaining to the user that the client's current settings will be backed up at a specific location. %1 is a stand-in argument for the backup location's path.Client will be shut down. Do you want to proceed?Text asking the user to confirm if they would like to proceed with a client shutdown.Configuration optionsWindow title text of pop-up box that allows opening up of configuration file.The configuration file is used to specify advanced user options which override GUI settings. Additionally, any command-line options will override this configuration file.Explanatory text about the priority order of instructions considered by client. The order from high to low being: command-line, configuration file, GUI settings.ContinueCancelErrorErrorThe configuration file could not be opened.This change would require a client restart.The supplied proxy address is invalid.The supplied proxy address is invalid.OptionsModelCould not read setting "%1", %2.OverviewPageFormFormThe displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet.The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet.Watch-only:Available:Your current spendable balanceYour current spendable balancePending:Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balanceTotal of transactions that have yet to be confirmed, and do not yet count toward the spendable balanceImmature:Immature:Mined balance that has not yet maturedMined balance that has not yet maturedBalancesTotal:Total:Your current total balanceYour current total balanceYour current balance in watch-only addressesSpendable:Recent transactionsUnconfirmed transactions to watch-only addressesMined balance in watch-only addresses that has not yet maturedCurrent total balance in watch-only addressesPrivacy mode activated for the Overview tab. To unmask the values, uncheck Settings->Mask values.PSBTOperationsDialogPSBT OperationsSign TxBroadcast TxCopy to ClipboardSave…CloseFailed to load transaction: %1Failed to sign transaction: %1Cannot sign inputs while wallet is locked.Could not sign any more inputs.Signed %1 inputs, but more signatures are still required.Signed transaction successfully. Transaction is ready to broadcast.Unknown error processing transaction.Transaction broadcast successfully! Transaction ID: %1Transaction broadcast failed: %1PSBT copied to clipboard.Save Transaction DataPartially Signed Transaction (Binary)Expanded name of the binary PSBT file format. See: BIP 174.PSBT saved to disk.Sends %1 to %2own addressUnable to calculate transaction fee or total transaction amount.Pays transaction fee: Total AmountorTransaction has %1 unsigned inputs.Transaction is missing some information about inputs.Transaction still needs signature(s).(But no wallet is loaded.)(But this wallet cannot sign transactions.)(But this wallet does not have the right keys.)Transaction is fully signed and ready for broadcast.Transaction status is unknown.PaymentServerPayment request errorCannot start bitcoin: click-to-pay handlerURI handling'bitcoin://' is not a valid URI. Use 'bitcoin:' instead.Cannot process payment request because BIP70 is not supported.
Due to widespread security flaws in BIP70 it's strongly recommended that any merchant instructions to switch wallets be ignored.
If you are receiving this error you should request the merchant provide a BIP21 compatible URI.URI cannot be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters.Payment request file handlingPeerTableModelUser AgentTitle of Peers Table column which contains the peer's User Agent string.PingTitle of Peers Table column which indicates the current latency of the connection with the peer.PeerTitle of Peers Table column which contains a unique number used to identify a connection.AgeTitle of Peers Table column which indicates the duration (length of time) since the peer connection started.DirectionTitle of Peers Table column which indicates the direction the peer connection was initiated from.SentTitle of Peers Table column which indicates the total amount of network information we have sent to the peer.ReceivedTitle of Peers Table column which indicates the total amount of network information we have received from the peer.AddressTitle of Peers Table column which contains the IP/Onion/I2P address of the connected peer.TypeTitle of Peers Table column which describes the type of peer connection. The "type" describes why the connection exists.NetworkTitle of Peers Table column which states the network the peer connected through.NetworkInboundAn Inbound Connection from a Peer.OutboundAn Outbound Connection to a Peer.QObjectAmountAmountEnter a Bitcoin address (e.g. %1)Ctrl+WUnroutableIPv4network nameName of IPv4 network in peer infoIPv6network nameName of IPv6 network in peer infoOnionnetwork nameName of Tor network in peer infoI2Pnetwork nameName of I2P network in peer infoCJDNSnetwork nameName of CJDNS network in peer infoInboundAn inbound connection from a peer. An inbound connection is a connection initiated by a peer.OutboundAn outbound connection to a peer. An outbound connection is a connection initiated by us.Full RelayPeer connection type that relays all network information.Block RelayPeer connection type that relays network information about blocks and not transactions or addresses.ManualPeer connection type established manually through one of several methods.FeelerShort-lived peer connection type that tests the aliveness of known addresses.Address FetchShort-lived peer connection type that solicits known addresses from a peer.%1 d%1 h%1 m%1 sNoneN/AN/A%1 ms%n second(s)%n second%n seconds%n minute(s)%n minute%n minutes%n hour(s)%n hour%n hours%n day(s)%n day%n days%n week(s)%n week%n weeks%1 and %2%n year(s)%n year%n years%1 B%1 kB%1 MB%1 GBdefault walletDo you want to reset settings to default values, or to abort without making changes?Explanatory text shown on startup when the settings file cannot be read. Prompts user to make a choice between resetting or aborting.A fatal error occurred. Check that settings file is writable, or try running with -nosettings.Explanatory text shown on startup when the settings file could not be written. Prompts user to check that we have the ability to write to the file. Explains that the user has the option of running without a settings file.Error: %1%1 didn't yet exit safely…unknownEmbedded "%1"Default system font "%1"Custom…QRImageWidget&Save Image…&Copy ImageResulting URI too long, try to reduce the text for label / message.Error encoding URI into QR Code.QR code support not available.Save QR CodePNG ImageExpanded name of the PNG file format. See: https://en.wikipedia.org/wiki/Portable_Network_Graphics.RPCConsoleN/AN/AClient versionClient version&Information&InformationGeneralDatadirTo specify a non-default location of the data directory use the '%1' option.BlocksdirTo specify a non-default location of the blocks directory use the '%1' option.Startup timeStartup timeNetworkNetworkNameNumber of connectionsNumber of connectionsLocal AddressesNetwork addresses that your Bitcoin node is currently using to communicate with other nodes.Block chainBlock chainMemory PoolCurrent number of transactionsMemory usageWallet: (none)&ResetReceivedSent&PeersBanned peersSelect a peer to view detailed information.Hide Peers DetailCtrl+XThe transport layer version: %1TransportSession IDVersionWhether we relay transactions to this peer.Transaction RelayStarting BlockSynced HeadersSynced BlocksLast TransactionThe mapped Autonomous System used for diversifying peer selection.Mapped ASWhether we relay addresses to this peer.Tooltip text for the Address Relay field in the peer details area, which displays whether we relay addresses to this peer (Yes/No).Address RelayText title for the Address Relay field in the peer details area, which displays whether we relay addresses to this peer (Yes/No).The total number of addresses received from this peer that were processed (excludes addresses that were dropped due to rate-limiting).Tooltip text for the Addresses Processed field in the peer details area, which displays the total number of addresses received from this peer that were processed (excludes addresses that were dropped due to rate-limiting).The total number of addresses received from this peer that were dropped (not processed) due to rate-limiting.Tooltip text for the Addresses Rate-Limited field in the peer details area, which displays the total number of addresses received from this peer that were dropped (not processed) due to rate-limiting.Addresses ProcessedText title for the Addresses Processed field in the peer details area, which displays the total number of addresses received from this peer that were processed (excludes addresses that were dropped due to rate-limiting).Addresses Rate-LimitedText title for the Addresses Rate-Limited field in the peer details area, which displays the total number of addresses received from this peer that were dropped (not processed) due to rate-limiting.User AgentNode windowCurrent block heightOpen the %1 debug log file from the current data directory. This can take a few seconds for large log files.Decrease font sizeIncrease font sizePermissionsThe direction and type of peer connection: %1Direction/TypeThe BIP324 session ID string in hex.The network protocol this peer is connected through: IPv4, IPv6, Onion, I2P, or CJDNS.ServicesHigh bandwidth BIP152 compact block relay: %1High BandwidthConnection TimeElapsed time since a novel block passing initial validity checks was received from this peer.Last BlockElapsed time since a novel transaction accepted into our mempool was received from this peer.Tooltip text for the Last Transaction field in the peer details area.Last SendLast ReceivePing TimeThe duration of a currently outstanding ping.Ping WaitMin PingTime OffsetLast block timeLast block time&Open&Open&Console&Console&Network TrafficTotalsIn:Out:Debug log fileDebug log fileClear consoleClear consoleYesNoToFromBan forNeverInbound: initiated by peerExplanatory text for an inbound peer connection.Outbound Full Relay: defaultExplanatory text for an outbound peer connection that relays all network information. This is the default behavior for outbound connections.Outbound Block Relay: does not relay transactions or addressesExplanatory text for an outbound peer connection that relays network information about blocks and not transactions or addresses.Outbound Manual: added using RPC %1 or %2/%3 configuration optionsExplanatory text for an outbound peer connection that was established manually through one of several methods. The numbered arguments are stand-ins for the methods available to establish manual connections.Outbound Feeler: short-lived, for testing addressesExplanatory text for a short-lived outbound peer connection that is used to test the aliveness of known addresses.Outbound Address Fetch: short-lived, for soliciting addressesExplanatory text for a short-lived outbound peer connection that is used to request addresses from a peer.detecting: peer could be v1 or v2Explanatory text for "detecting" transport type.v1: unencrypted, plaintext transport protocolExplanatory text for v1 transport type.v2: BIP324 encrypted transport protocolExplanatory text for v2 transport type.we selected the peer for high bandwidth relaythe peer selected us for high bandwidth relayno high bandwidth relay selectedCtrl++Main shortcut to increase the RPC console font size.Ctrl+=Secondary shortcut to increase the RPC console font size.Ctrl+-Main shortcut to decrease the RPC console font size.Ctrl+_Secondary shortcut to decrease the RPC console font size.&Copy addressContext menu action to copy the address of a peer.&Disconnect1 &hour1 d&ay1 &week1 &year&Copy IP/NetmaskContext menu action to copy the IP/Netmask of a banned peer. IP/Netmask is the combination of a peer's IP address and its Netmask. For IP address, see: https://en.wikipedia.org/wiki/IP_address.&UnbanNetwork activity disabledNoneExecuting command without any walletCtrl+ICtrl+TCtrl+NCtrl+PNode window - [%1]Executing command using "%1" walletWelcome to the %1 RPC console.
Use up and down arrows to navigate history, and %2 to clear screen.
Use %3 and %4 to increase or decrease the font size.
Type %5 for an overview of available commands.
For more information on using this console, type %6.
%7WARNING: Scammers have been active, telling users to type commands here, stealing their wallet contents. Do not use this console without fully understanding the ramifications of a command.%8RPC console welcome message. Placeholders %7 and %8 are style tags for the warning content, and they are not space separated from the rest of the text intentionally.Executing…A console message indicating an entered command is currently being executed.(peer: %1)via %1UnknownReceiveCoinsDialog&Amount:&Label:&Label:&Message:An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network.An optional label to associate with the new receiving address.Use this form to request payments. All fields are <b>optional</b>.An optional amount to request. Leave this empty or zero to not request a specific amount.An optional label to associate with the new receiving address (used by you to identify an invoice). It is also attached to the payment request.An optional message that is attached to the payment request and may be displayed to the sender.&Create new receiving addressClear all fields of the form.ClearRequested payments historyShow the selected request (does the same as double clicking an entry)ShowRemove the selected entries from the listRemoveCopy &URI&Copy addressCopy &labelCopy &messageCopy &amountBase58 (Legacy)Not recommended due to higher fees and less protection against typos.Base58 (P2SH-SegWit)Generates an address compatible with older wallets.Bech32 (SegWit)Generates a native segwit address (BIP-173). Some old wallets don't support it.Bech32m (Taproot)Bech32m (BIP-350) is an upgrade to Bech32, wallet support is still limited.Could not unlock wallet.Could not generate new %1 addressReceiveRequestDialogRequest payment to …Address:Amount:Label:Message:Wallet:Copy &URICopy &Address&VerifyVerify this address on e.g. a hardware wallet screen&Save Image…Request payment to %1Payment informationRecentRequestsTableModelDateDateLabelMessage(no label)(no message)(no amount requested)RequestedRestoreWalletActivityRestore WalletTitle of progress window which is displayed when wallets are being restored.Restoring Wallet <b>%1</b>…Descriptive text of the restore wallets progress window which indicates to the user that wallets are currently being restored.Restore wallet failedTitle of message box which is displayed when the wallet could not be restored.Restore wallet warningTitle of message box which is displayed when the wallet is restored with some warning.Restore wallet messageTitle of message box which is displayed when the wallet is successfully restored.SendCoinsDialogSend CoinsSend CoinsCoin Control Featuresautomatically selectedInsufficient funds!Quantity:Bytes:Amount:Fee:After Fee:Change:If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address.Custom change addressTransaction Fee:Using the fallbackfee can result in sending a transaction that will take several hours or days (or never) to confirm. Consider choosing your fee manually or wait until you have validated the complete chain.Warning: Fee estimation is currently not possible.per kilobyteHideRecommended:Custom:Send to multiple recipients at onceSend to multiple recipients at onceAdd &RecipientAdd &RecipientClear all fields of the form.Inputs…Choose…Hide transaction fee settingsSpecify a custom fee per kB (1,000 bytes) of the transaction's virtual size.
Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 satoshis per kvB" for a transaction size of 500 virtual bytes (half of 1 kvB) would ultimately yield a fee of only 50 satoshis.When there is less transaction volume than space in the blocks, miners as well as relaying nodes may enforce a minimum fee. Paying only this minimum fee is just fine, but be aware that this can result in a never confirming transaction once there is more demand for bitcoin transactions than the network can process.A too low fee might result in a never confirming transaction (read the tooltip)(Smart fee not initialized yet. This usually takes a few blocks…)Confirmation time target:Enable Replace-By-FeeWith Replace-By-Fee (BIP-125) you can increase a transaction's fee after it is sent. Without this, a higher fee may be recommended to compensate for increased transaction delay risk.Clear &AllClear &AllBalance:Balance:Confirm the send actionConfirm the send actionS&endS&endCopy quantityCopy amountCopy feeCopy after feeCopy bytesCopy change%1 (%2 blocks)Sign on device"device" usually means a hardware wallet.Connect your hardware wallet first.Set external signer script path in Options -> Wallet"External signer" means using devices such as hardware wallets.Cr&eate UnsignedCreates a Partially Signed Bitcoin Transaction (PSBT) for use with e.g. an offline %1 wallet, or a PSBT-compatible hardware wallet.%1 to '%2'%1 to %2To review recipient list click "Show Details…"Sign failedExternal signer not found"External signer" means using devices such as hardware wallets.External signer failure"External signer" means using devices such as hardware wallets.Save Transaction DataPartially Signed Transaction (Binary)Expanded name of the binary PSBT file format. See: BIP 174.PSBT savedPopup message when a PSBT has been saved to a fileExternal balance:orYou can increase the fee later (signals Replace-By-Fee, BIP-125).Please, review your transaction proposal. This will produce a Partially Signed Bitcoin Transaction (PSBT) which you can save or copy and then sign with e.g. an offline %1 wallet, or a PSBT-compatible hardware wallet.Text to inform a user attempting to create a transaction of their current options. At this stage, a user can only create a PSBT. This string is displayed when private keys are disabled and an external signer is not available.%1 from wallet '%2'Do you want to create this transaction?Message displayed when attempting to create a transaction. Cautionary text to prompt the user to verify that the displayed transaction details represent the transaction the user intends to create.Please, review your transaction. You can create and send this transaction or create a Partially Signed Bitcoin Transaction (PSBT), which you can save or copy and then sign with, e.g., an offline %1 wallet, or a PSBT-compatible hardware wallet.Text to inform a user attempting to create a transaction of their current options. At this stage, a user can send their transaction or create a PSBT. This string is displayed when both private keys and PSBT controls are enabled.Please, review your transaction.Text to prompt a user to review the details of the transaction they are attempting to send.Transaction fee%1 kvBPSBT transaction creationWhen reviewing a newly created PSBT (via Send flow), the transaction fee is shown, with "virtual size" of the transaction displayed for contextNot signalling Replace-By-Fee, BIP-125.Total AmountUnsigned TransactionPSBT copiedCaption of "PSBT has been copied" messageboxThe PSBT has been copied to the clipboard. You can also save it.PSBT saved to diskConfirm send coinsWatch-only balance:The recipient address is not valid. Please recheck.The amount to pay must be larger than 0.The amount exceeds your balance.The total exceeds your balance when the %1 transaction fee is included.Duplicate address found: addresses should only be used once each.Transaction creation failed!A fee higher than %1 is considered an absurdly high fee.%1/kvBEstimated to begin confirmation within %n block(s).Estimated to begin confirmation within %n block.Estimated to begin confirmation within %n blocks.Warning: Invalid Bitcoin addressWarning: Unknown change addressConfirm custom change addressThe address you selected for change is not part of this wallet. Any or all funds in your wallet may be sent to this address. Are you sure?(no label)SendCoinsEntryA&mount:A&mount:Pay &To:Pay &To:&Label:&Label:Choose previously used addressThe Bitcoin address to send the payment toAlt+AAlt+APaste address from clipboardPaste address from clipboardAlt+PAlt+PRemove this entryThe amount to send in the selected unitThe fee will be deducted from the amount being sent. The recipient will receive less bitcoins than you enter in the amount field. If multiple recipients are selected, the fee is split equally.S&ubtract fee from amountUse available balanceMessage:Enter a label for this address to add it to the list of used addressesA message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network.SendConfirmationDialogSendCreate UnsignedShutdownWindow%1 is shutting down…Do not shut down the computer until this window disappears.SignVerifyMessageDialogSignatures - Sign / Verify a MessageSignatures - Sign / Verify a Message&Sign Message&Sign MessageYou can sign messages/agreements with your legacy (P2PKH) addresses to prove you can receive bitcoins sent to them. Be careful not to sign anything vague or random, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to.The Bitcoin address to sign the message withChoose previously used addressAlt+AAlt+APaste address from clipboardPaste address from clipboardAlt+PAlt+PEnter the message you want to sign hereEnter the message you want to sign hereSignatureSignatureCopy the current signature to the system clipboardCopy the current signature to the system clipboardSign the message to prove you own this Bitcoin addressSign the message to prove you own this Bitcoin addressSign &MessageSign &MessageReset all sign message fieldsReset all sign message fieldsClear &AllClear &All&Verify Message&Verify MessageEnter the receiver's address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. Note that this only proves the signing party receives with the address, it cannot prove sendership of any transaction!The Bitcoin address the message was signed withThe signed message to verifyThe signature given when the message was signedVerify the message to ensure it was signed with the specified Bitcoin addressVerify the message to ensure it was signed with the specified Bitcoin addressVerify &MessageVerify &MessageReset all verify message fieldsReset all verify message fieldsClick "Sign Message" to generate signatureThe entered address is invalid.Please check the address and try again.The entered address does not refer to a legacy (P2PKH) key. Message signing for SegWit and other non-P2PKH address types is not supported in this version of %1. Please check the address and try again.Wallet unlock was cancelled.No errorPrivate key for the entered address is not available.Message signing failed.Message signed.The signature could not be decoded.Please check the signature and try again.The signature did not match the message digest.Message verification failed.Message verified.SplashScreen(press q to shutdown and continue later)press q to shutdownTrafficGraphWidgetkB/sTransactionDescconflicted with a transaction with %1 confirmationsText explaining the current status of a transaction, shown in the status field of the details window for this transaction. This status represents an unconfirmed transaction that conflicts with a confirmed transaction.0/unconfirmed, in memory poolText explaining the current status of a transaction, shown in the status field of the details window for this transaction. This status represents an unconfirmed transaction that is in the memory pool.0/unconfirmed, not in memory poolText explaining the current status of a transaction, shown in the status field of the details window for this transaction. This status represents an unconfirmed transaction that is not in the memory pool.abandonedText explaining the current status of a transaction, shown in the status field of the details window for this transaction. This status represents an abandoned transaction.%1/unconfirmedText explaining the current status of a transaction, shown in the status field of the details window for this transaction. This status represents a transaction confirmed in at least one block, but less than 6 blocks.%1 confirmationsText explaining the current status of a transaction, shown in the status field of the details window for this transaction. This status represents a transaction confirmed in 6 or more blocks.StatusDateDateSourceGeneratedFromunknownToown addresswatch-onlylabelCreditmatures in %n more block(s)matures in %n more blockmatures in %n more blocksnot acceptedDebitTotal debitTotal creditTransaction feeNet amountMessageCommentTransaction IDTransaction total sizeTransaction virtual sizeOutput index%1 (Certificate was not verified)MerchantGenerated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.Debug informationTransactionInputsAmountAmounttruefalseTransactionDescDialogThis pane shows a detailed description of the transactionThis pane shows a detailed description of the transactionDetails for %1TransactionTableModelDateDateTypeLabelUnconfirmedAbandonedConfirming (%1 of %2 recommended confirmations)Confirmed (%1 confirmations)ConflictedImmature (%1 confirmations, will be available after %2)Generated but not acceptedReceived withReceived fromSent toMinedwatch-only(n/a)(no label)Transaction status. Hover over this field to show number of confirmations.Date and time that the transaction was received.Type of transaction.Whether or not a watch-only address is involved in this transaction.User-defined intent/purpose of the transaction.Amount removed from or added to balance.TransactionViewAllTodayThis weekThis monthLast monthThis yearReceived withSent toMinedOtherEnter address, transaction id, or label to searchMin amountRange…&Copy addressCopy &labelCopy &amountCopy transaction &IDCopy &raw transactionCopy full transaction &details&Show transaction detailsIncrease transaction &feeA&bandon transaction&Edit address labelShow in %1Transactions table context menu action to show the selected transaction in a third-party block explorer. %1 is a stand-in argument for the URL of the explorer.Export Transaction HistoryComma separated fileExpanded name of the CSV file format. See: https://en.wikipedia.org/wiki/Comma-separated_values.ConfirmedConfirmedWatch-onlyDateDateTypeLabelAddressIDExporting FailedThere was an error trying to save the transaction history to %1.Exporting SuccessfulThe transaction history was successfully saved to %1.Range:toUnitDisplayStatusBarControlUnit to show amounts in. Click to select another unit.WalletControllerClose walletAre you sure you wish to close the wallet <i>%1</i>?Closing the wallet for too long can result in having to resync the entire chain if pruning is enabled.Close all walletsAre you sure you wish to close all wallets?WalletFrameNo wallet has been loaded.
Go to File > Open Wallet to load a wallet.
- OR -Create a new walletErrorErrorUnable to decode PSBT from clipboard (invalid base64)Load Transaction DataPartially Signed Transaction (*.psbt)PSBT file must be smaller than 100 MiBUnable to decode PSBTWalletModelSend CoinsSend CoinsFee bump errorIncreasing transaction fee failedDo you want to increase the fee?Asks a user if they would like to manually increase the fee of a transaction that has already been created.Current fee:Increase:New fee:Warning: This may pay the additional fee by reducing change outputs or adding inputs, when necessary. It may add a new change output if one does not already exist. These changes may potentially leak privacy.Confirm fee bumpCan't draft transaction.PSBT copiedFee-bump PSBT copied to clipboardCan't sign transaction.Could not commit transactionSigner errorCan't display addressWalletView&Export&ExportExport the data in the current tab to a fileExport the data in the current tab to a fileBackup WalletWallet DataName of the wallet data file format.Backup FailedThere was an error trying to save the wallet data to %1.Backup SuccessfulThe wallet data was successfully saved to %1.Cancelbitcoin-coreThe %s developers%s corrupt. Try using the wallet tool bitcoin-wallet to salvage or restoring a backup.%s failed to validate the -assumeutxo snapshot state. This indicates a hardware problem, or a bug in the software, or a bad software modification that allowed an invalid snapshot to be loaded. As a result of this, the node will shut down and stop using any state that was built on the snapshot, resetting the chain height from %d to %d. On the next restart, the node will resume syncing from %d without using any snapshot data. Please report this incident to %s, including how you obtained the snapshot. The invalid snapshot chainstate will be left on disk in case it is helpful in diagnosing the issue that caused this error.%s request to listen on port %u. This port is considered "bad" and thus it is unlikely that any peer will connect to it. See doc/p2p-bad-ports.md for details and a full list.Cannot downgrade wallet from version %i to version %i. Wallet version unchanged.Cannot upgrade a non HD split wallet from version %i to version %i without upgrading to support pre-split keypool. Please use version %i or no version specified.Disk space for %s may not accommodate the block files. Approximately %u GB of data will be stored in this directory.Distributed under the MIT software license, see the accompanying file %s or %sError loading wallet. Wallet requires blocks to be downloaded, and software does not currently support loading wallets while blocks are being downloaded out of order when using assumeutxo snapshots. Wallet should be able to load successfully after node sync reaches height %sError reading %s! Transaction data may be missing or incorrect. Rescanning wallet.Error starting/committing db txn for wallet transactions removal processError: Dumpfile format record is incorrect. Got "%s", expected "format".Error: Dumpfile identifier record is incorrect. Got "%s", expected "%s".Error: Dumpfile version is not supported. This version of bitcoin-wallet only supports version 1 dumpfiles. Got dumpfile with version %sError: Legacy wallets only support the "legacy", "p2sh-segwit", and "bech32" address typesError: Unable to produce descriptors for this legacy wallet. Make sure to provide the wallet's passphrase if it is encrypted.File %s already exists. If you are sure this is what you want, move it out of the way first.Invalid or corrupt peers.dat (%s). If you believe this is a bug, please report it to %s. As a workaround, you can move the file (%s) out of the way (rename, move, or delete) to have a new one created on the next start.Invalid value detected for '-wallet' or '-nowallet'. '-wallet' requires a string value, while '-nowallet' accepts only '1' to disable all walletsMore than one onion bind address is provided. Using %s for the automatically created Tor onion service.No dump file provided. To use createfromdump, -dumpfile=<filename> must be provided.No dump file provided. To use dump, -dumpfile=<filename> must be provided.No wallet file format provided. To use createfromdump, -format=<format> must be provided.Option '-upnp' is set but UPnP support was dropped in version 29.0. Consider using '-natpmp' instead.Please contribute if you find %s useful. Visit %s for further information about the software.Prune configured below the minimum of %d MiB. Please use a higher number.Prune mode is incompatible with -reindex-chainstate. Use full -reindex instead.Prune: last wallet synchronisation goes beyond pruned data. You need to -reindex (download the whole blockchain again in case of pruned node)Rename of '%s' -> '%s' failed. You should resolve this by manually moving or deleting the invalid snapshot directory %s, otherwise you will encounter the same error again on the next startup.SQLiteDatabase: Unknown sqlite wallet schema version %d. Only version %d is supportedThe block database contains a block which appears to be from the future. This may be due to your computer's date and time being set incorrectly. Only rebuild the block database if you are sure that your computer's date and time are correctThe transaction amount is too small to send after the fee has been deductedThis error could occur if this wallet was not shutdown cleanly and was last loaded using a build with a newer version of Berkeley DB. If so, please use the software that last loaded this walletThis is a pre-release test build - use at your own risk - do not use for mining or merchant applicationsThis is the maximum transaction fee you pay (in addition to the normal fee) to prioritize partial spend avoidance over regular coin selection.This is the transaction fee you may discard if change is smaller than dust at this levelThis is the transaction fee you may pay when fee estimates are not available.Total length of network version string (%i) exceeds maximum length (%i). Reduce the number or size of uacomments.Unable to replay blocks. You will need to rebuild the database using -reindex-chainstate.Unknown wallet file format "%s" provided. Please provide one of "bdb" or "sqlite".Unsupported category-specific logging level %1$s=%2$s. Expected %1$s=<category>:<loglevel>. Valid categories: %3$s. Valid loglevels: %4$s.Unsupported chainstate database format found. Please restart with -reindex-chainstate. This will rebuild the chainstate database.Wallet created successfully. The legacy wallet type is being deprecated and support for creating and opening legacy wallets will be removed in the future.Wallet loaded successfully. The legacy wallet type is being deprecated and support for creating and opening legacy wallets will be removed in the future. Legacy wallets can be migrated to a descriptor wallet with migratewallet.Warning: Dumpfile wallet format "%s" does not match command line specified format "%s".Warning: Private keys detected in wallet {%s} with disabled private keysWarning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade.Witness data for blocks after height %d requires validation. Please restart with -reindex.You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain%s is set very high!-maxmempool must be at least %d MBCannot obtain a lock on directory %s. %s is probably already running.Cannot resolve -%s address: '%s'Cannot set -forcednsseed to true when setting -dnsseed to false.Cannot set -peerblockfilters without -blockfilterindex.%s is set very high! Fees this large could be paid on a single transaction.Cannot provide specific connections and have addrman find outgoing connections at the same time.Error loading %s: External signer wallet being loaded without external signer support compiledError reading %s! All keys read correctly, but transaction data or address metadata may be missing or incorrect.Error: Address book data in wallet cannot be identified to belong to migrated walletsError: Duplicate descriptors created during migration. Your wallet may be corrupted.Error: Transaction %s in wallet cannot be identified to belong to migrated walletsFailed to calculate bump fees, because unconfirmed UTXOs depend on enormous cluster of unconfirmed transactions.Failed to remove snapshot chainstate dir (%s). Manually remove it before restarting.
Failed to rename invalid peers.dat file. Please move or delete it and try again.Fee estimation failed. Fallbackfee is disabled. Wait a few blocks or enable %s.Flushing block file to disk failed. This is likely the result of an I/O error.Flushing undo file to disk failed. This is likely the result of an I/O error.Incompatible options: -dnsseed=1 was explicitly specified, but -onlynet forbids connections to IPv4/IPv6Invalid amount for %s=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions)Maximum transaction weight is less than transaction weight without inputsMaximum transaction weight is too low, can not accommodate change outputOutbound connections restricted to CJDNS (-onlynet=cjdns) but -cjdnsreachable is not providedOutbound connections restricted to Tor (-onlynet=onion) but the proxy for reaching the Tor network is explicitly forbidden: -onion=0Outbound connections restricted to Tor (-onlynet=onion) but the proxy for reaching the Tor network is not provided: none of -proxy, -onion or -listenonion is givenOutbound connections restricted to i2p (-onlynet=i2p) but -i2psam is not providedRename of '%s' -> '%s' failed. Cannot clean up the background chainstate leveldb directory.The combination of the pre-selected inputs and the wallet automatic inputs selection exceeds the transaction maximum weight. Please try sending a smaller amount or manually consolidating your wallet's UTXOsThe inputs size exceeds the maximum weight. Please try sending a smaller amount or manually consolidating your wallet's UTXOsThe preselected coins total amount does not cover the transaction target. Please allow other inputs to be automatically selected or include more coins manuallyTransaction requires one destination of non-0 value, a non-0 feerate, or a pre-selected inputUTXO snapshot failed to validate. Restart to resume normal initial block download, or try loading a different snapshot.Unconfirmed UTXOs are available, but spending them creates a chain of transactions that will be rejected by the mempoolUnexpected legacy entry in descriptor wallet found. Loading wallet %s
The wallet might have been tampered with or created with malicious intent.
Unrecognized descriptor found. Loading wallet %s
The wallet might had been created on a newer version.
Please try running the latest software version.
Your computer's date and time appear to be more than %d minutes out of sync with the network, this may lead to consensus failure. After you've confirmed your computer's clock, this message should no longer appear when you restart your node. Without a restart, it should stop showing automatically after you've connected to a sufficient number of new outbound peers, which may take some time. You can inspect the `timeoffset` field of the `getpeerinfo` and `getnetworkinfo` RPC methods to get more info.
Unable to cleanup failed migration
Unable to restore backup of wallet.whitebind may only be used for incoming connections ("out" was passed)A fatal internal error occurred, see debug.log for details: Assumeutxo data not found for the given blockhash '%s'.Block verification was interruptedCannot write to directory '%s'; check permissions.Config setting for %s only applied on %s network when in [%s] section.Copyright (C) %i-%iCorrupt block found indicating potential hardware failure.Corrupted block database detectedCould not find asmap file %sCould not parse asmap file %sDisk space is too low!Done loadingDump file %s does not exist.Elliptic curve cryptography sanity check failure. %s is shutting down.Error creating %sError initializing block databaseError initializing wallet database environment %s!Error loading %sError loading %s: Private keys can only be disabled during creationError loading %s: Wallet corruptedError loading %s: Wallet requires newer version of %sError loading block databaseError loading databasesError opening block databaseError opening coins databaseError reading configuration file: %sError reading from database, shutting down.Error reading next record from wallet databaseError: Cannot extract destination from the generated scriptpubkeyError: Couldn't create cursor into databaseError: Disk space is low for %sError: Dumpfile checksum does not match. Computed %s, expected %sError: Failed to create new watchonly walletError: Got key that was not hex: %sError: Got value that was not hex: %sError: Keypool ran out, please call keypoolrefill firstError: Missing checksumError: No %s addresses available.Error: This wallet already uses SQLiteError: This wallet is already a descriptor walletError: Unable to begin reading all records in the databaseError: Unable to make a backup of your walletError: Unable to parse version %u as a uint32_tError: Unable to read all records in the databaseError: Unable to read wallet's best block locator recordError: Unable to remove watchonly address book dataError: Unable to write data to disk for wallet %sError: Unable to write record to new walletError: Unable to write solvable wallet best block locator recordError: Unable to write watchonly wallet best block locator recordError: database transaction cannot be executed for wallet %sFailed to connect best block (%s).Failed to disconnect block.Failed to listen on any port. Use -listen=0 if you want this.Failed to read block.Failed to rescan the wallet during initializationFailed to start indexes, shutting down..Failed to verify databaseFailed to write block.Failed to write to block index database.Failed to write to coin database.Failed to write undo data.Failure removing transaction: %sFee rate (%s) is lower than the minimum fee rate setting (%s)Ignoring duplicate -wallet %s.Importing…Incorrect or no genesis block found. Wrong datadir for network?Initialization sanity check failed. %s is shutting down.Input not found or already spentInsufficient dbcache for block verificationInsufficient fundsInvalid -i2psam address or hostname: '%s'Invalid -onion address or hostname: '%s'Invalid -proxy address or hostname: '%s'Invalid P2P permission: '%s'Invalid amount for %s=<amount>: '%s' (must be at least %s)Invalid amount for %s=<amount>: '%s'Invalid amount for -%s=<amount>: '%s'Invalid netmask specified in -whitelist: '%s'Invalid port specified in %s: '%s'Invalid pre-selected input %sListening for incoming connections failed (listen returned error %s)Loading P2P addresses…Loading banlist…Loading block index…Loading wallet…Maximum transaction weight must be between %d and %dMissing amountMissing solving data for estimating transaction sizeNeed to specify a port with -whitebind: '%s'No addresses availableNot found pre-selected input %sNot solvable pre-selected input %sOnly direction was set, no permissions: '%s'Prune cannot be configured with a negative value.Prune mode is incompatible with -txindex.Pruning blockstore…Reducing -maxconnections from %d to %d, because of system limitations.Replaying blocks…Rescanning…SQLiteDatabase: Failed to execute statement to verify database: %sSQLiteDatabase: Failed to prepare statement to verify database: %sSQLiteDatabase: Failed to read database verification error: %sSQLiteDatabase: Unexpected application id. Expected %u, got %uSection [%s] is not recognized.Signer did not echo addressSigner echoed unexpected address %sSigner returned error: %sSigning transaction failedSpecified -walletdir "%s" does not existSpecified -walletdir "%s" is a relative pathSpecified -walletdir "%s" is not a directorySpecified blocks directory "%s" does not exist.Specified data directory "%s" does not exist.Starting network threads…System error while flushing: %sSystem error while loading external block file: %sSystem error while saving block to disk: %sThe source code is available from %s.The specified config file %s does not existThe transaction amount is too small to pay the feeThe transactions removal process can only be executed within a db txnThe wallet will avoid paying less than the minimum relay fee.There is no ScriptPubKeyManager for this addressThis is experimental software.This is the minimum transaction fee you pay on every transaction.This is the transaction fee you will pay if you send a transaction.Transaction %s does not belong to this walletTransaction amount too smallTransaction amounts must not be negativeTransaction change output index out of rangeTransaction must have at least one recipientTransaction needs a change address, but we can't generate it.Transaction too largeUnable to bind to %s on this computer (bind returned error %s)Unable to bind to %s on this computer. %s is probably already running.Unable to create the PID file '%s': %sUnable to find UTXO for external inputUnable to generate initial keysUnable to generate keysUnable to open %s for writingUnable to parse -maxuploadtarget: '%s'Unable to start HTTP server. See debug log for details.Unable to unload the wallet before migratingUnknown -blockfilterindex value %s.Unknown address type '%s'Unknown change type '%s'Unknown network specified in -onlynet: '%s'Unknown new rules activated (versionbit %i)Unrecognised option "%s" provided in -test=<option>.Unsupported global logging level %s=%s. Valid values: %s.Wallet file creation failed: %sacceptstalefeeestimates is not supported on %s chain.Unsupported logging category %s=%s.Do you want to rebuild the databases now?Error: Could not add watchonly tx %s to watchonly walletError: Could not delete watchonly transactions. Error: Wallet does not existError: cannot remove legacy wallet recordsNot enough file descriptors available. %d available, %d required.User Agent comment (%s) contains unsafe characters.Verifying blocks…Verifying wallet(s)…Wallet needed to be rewritten: restart %s to completeSettings file could not be readSettings file could not be written