#### ALL FULL DEFINITIONS PARAMETERS ####



#### ALL GENERATED DEFINITIONS PARAMETERS ####
AFM enabled
AFM flow
AFM maximum voltage error enabled(Off=2047,On=1002)
AFM maximum voltage
AFM minimum voltage
Calibration ID
Cam angle high
Cam angle low
CC gear ratio 1
CC gear ratio 2
Closed loop target lambda
Coil test enabled (P351 P352 P353 P354)
Cold start idle air control system (P050A, P050B)
Coolant thermostat temperature check enabled (P0128) #3
CVNRPM speed
Default PA value
EGR enabled
EPS enabled
EVAP FTP enabled (P0451 P0452 P0453 P1454)
Forced induction enabled
Fuel economy alternator control
Idle speed (after start)
Idle speed (normal)
Idle Speed
Ignition dwell angle voltage compensation
Ignition low #1
Ignition low #2
Ignition low #3
Ignition low #4
Ignition low #5
Ignition retard gear compensation
Ignition retard rpm compensation
Ignition retard throttle compensation
Individual cylinder fuel trim
Individual cylinder ignition trim
Injector Voltage Compensation
Launch recover rpm #1
Launch recover rpm #2
Launch rpm #1
Launch rpm #2
Launch rpm disengage speed
MAP offset(Off=0,On=6)
MAP scalar(Off=0,On=0)
MAP WOT determination pressure
Maximum MAP voltage
Maximum plate deviation (P2101)
Minimum air temperature for alternator control
Minimum ECT for alternator control
Minimum MAP voltage
Minimum throttle opening compensation
Overrun throttle opening (rev hang) enabled(Off=160,On=137)
PA sensor enabled
Post Start Idle Speed
Purge/EVAP enabled
Radiator fan off
Radiator fan on
Rev limiter #1
Rev limiter #2
Rev limiter #3
Rev limiter #4
Rev limiter recover #1
Rev limiter recover #2
Rev limiter recover #3
Rev limiter recover #4
RSSWGO67
Second ECT sensor enabled
Secondary oxygen sensor enabled
Speed adjustment (ECU)
Speed limiter rpm
Speed limiter speed
Throttle/brake max something
Throttle/brake max speed
TPlate Normal
Use MAP to determine WOT(Off=1,On=0)
VSA enabled
VTC enabled
VTEC oil pressure switch enabled
VTEC window pressure
Write security word #1
Write security word #2
Write security word #3