#### ALL FULL DEFINITIONS PARAMETERS ####



#### ALL GENERATED DEFINITIONS PARAMETERS ####
Active AFM Maximum gear
Active AFM Open loop
Active AFM Use fuel trims
Active AFN Use fuel trims
AFM enabled
Auto stop/start enabled
Boost pressure reverse lookup
CAIN angle map
Calibration ID
Coolant thermostat temperature check enabled (P0128)
EGR enabled
ELD enabled
EPS enabled
Ethanol input enabled
EVAP VSV error check enabled (P0498 P0499)
Forced induction enabled
Idle Speed
Immobilizer enabled(Off=0,On=6)
Knock sensor enabled
Launch rpm disengage speed
MAF Load Limit
Mass or volume circuit range performance problem enabled (P0101)
Misfire detection
Open loop
Post Start Idle Speed
Purge/EVAP enabled
Revlimiter 1
Revlimiter 2
Revlimiter 3
Revlimiter 4
Revlimiter 5
Revlimiter 6
Revlimiter 7
Revlimiter
Second ECT sensor enabled
Secondary oxygen sensor enabled
Speedlimiter
Target fuel pressure map (high water temp)
Target fuel pressure map (low water temp)
Target RPM (no load) for throttle
TC boost command
Traction Control enabled
Under boost error (P0299)
Use fuel trims
Use MAP to determine WOT(Off=1,On=0)
VSA enabled
VTEC Engagement
VTEC oil pressure switch enabled