#### ALL FULL DEFINITIONS PARAMETERS ####



#### ALL GENERATED DEFINITIONS PARAMETERS ####
Active AFM Minimum TPS
AFM enabled
Boost pressure reverse lookup
CAIN angle map
Calibration ID
Enable lambda tach display
EPS enabled
Ethanol input enabled
Forced induction enabled
Idle Speed
Idle stop enabled
Knock sensor enabled
Launch rpm disengage speed
MAF Load Limit
Mass or volume circuit range performance problem enabled (P0101)
Post Start Idle Speed
Primary oxygen sensor enabled
Purge/EVAP enabled
Revlimiter 1
Revlimiter 2
Revlimiter 3
Revlimiter 4
Revlimiter 5
Revlimiter 6
Revlimiter 7
Revlimiter
Second ECT sensor enabled
Secondary oxygen sensor enabled
Speedlimiter
Target fuel pressure map (high water temp)
Target fuel pressure map (low water temp)
Target RPM (no load) for throttle
TC boost command
Traction Control use cornering correction
Under boost error (P0299)
Use MAP to determine WOT(Off=1,On=0)
VSA enabled
VTC enabled(Off=0,On=2)
VTEC Engagement
VTEC oil pressure switch enabled