#### ALL FULL DEFINITIONS PARAMETERS ####



#### ALL GENERATED DEFINITIONS PARAMETERS ####
AFM enabled
Calibration ID
Closed loop target lambda
Coil test enabled (P351 P352 P353 P354)
Cold start idle air control system (P050A, P050B)
Coolant thermostat temperature check enabled (P0128) #1
Coolant thermostat temperature check enabled (P0128) #2
Coolant thermostat temperature check enabled (P0128) #3
Default PA value
EGR enabled
ELD enabled
EVAP FTP enabled (P0451 P0452 P0453 P1454)
EVAP leak detection enabled (P0457) #1
EVAP leak detection enabled (P0457) #2
EVAP VSV error check enabled (P0498 P0499)
Evaporative Emission Canister Purge Valve Circuit (P0443)
Forced induction enabled
Idle speed (after start)
Idle speed (normal)
Immobilizer enabled(Off=0,On=4)
Injector Voltage Compensation
Intake air system leak (P2279)
Knock sensor enabled
LAF voltage to lambda
Launch rpm #1
Launch rpm #2
Launch rpm recover #1
Launch rpm recover #2
MAP offset(Off=0,On=6)
MAP scalar(Off=0,On=0)
MAP too low / too high enabled (P1127 P1128)
MAP WOT determination pressure
Mass or volume circuit range performance problem enabled (P0101)
Maximum MAP voltage
Maximum plate deviation (P2101)
Minimum air temperature for alternator control
Minimum ECT for alternator control
Minimum MAP voltage
Misfire detection
PA vs MAP error enabled (P2227)
Primary oxygen sensor enabled
Purge/EVAP enabled
Rev limiter #1
Rev limiter #2
Rev limiter #3
Rev limiter #4
Rev limiter recover #1
Rev limiter recover #2
Rev limiter recover #3
Rev limiter recover #4
Revlimiter 1
Revlimiter 2
Revlimiter 3
Revlimiter 4
Revlimiter 5
Revlimiter 6
Revlimiter 7
Revlimiter
RSSWGO67
Second ECT sensor enabled
Secondary oxygen sensor enabled
TPlate Normal
TPS WOT determination high
VSA enabled
VTC enabled
VTEC oil pressure switch enabled
Write security word #1
Write security word #2
Write security word #3