#### ALL FULL DEFINITIONS PARAMETERS ####



#### ALL GENERATED DEFINITIONS PARAMETERS ####
AFM maximum voltage error enabled(Off=2047,On=1002)
AFM maximum voltage
AFM minimum voltage
Calibration ID
CC gear ratio 1
CC gear ratio 2
Closed loop target lambda
Coil test enabled (P351 P352 P353 P354)
Default PA value
Idle speed (after start)
Idle speed (normal)
Idle Speed
Ignition dwell angle voltage compensation
Immobilizer enabled(Off=0,On=4)
Injector Voltage Compensation
KWOT high
KWOT low
LAF voltage to lambda
Launch rpm #1
Launch rpm #2
Launch rpm recover #1
Launch rpm recover #2
MAP offset(Off=0,On=6)
MAP scalar(Off=0,On=0)
MAP WOT determination pressure
Maximum MAP voltage
Maximum plate deviation (P2101)
Minimum air temperature for alternator control
Minimum ECT for alternator control
Minimum MAP voltage
Minimum throttle opening compensation
Post Start Idle Speed
Rev limiter #1
Rev limiter #2
Rev limiter #3
Rev limiter #4
Rev limiter recover #1
Rev limiter recover #2
Rev limiter recover #3
Rev limiter recover #4
Revlimiter 1
Revlimiter 2
Revlimiter 3
Revlimiter 4
Revlimiter 5
Revlimiter 6
Revlimiter 7
Revlimiter
Speed adjustment (ECU)
Throttle/brake max something
Throttle/brake max speed
TPlate Normal
Use MAP to determine WOT(Off=1,On=0)