#### ALL FULL DEFINITIONS PARAMETERS ####



#### ALL GENERATED DEFINITIONS PARAMETERS ####
AFM maximum voltage error enabled(Off=2047,On=1002)
AFM maximum voltage
AFM minimum voltage
Calibration ID
Default PA value
Ignition dwell angle voltage compensation
MAP too low / too high enabled (P1127 P1128)
Maximum MAP voltage
Maximum plate deviation (P2101)
Minimum MAP voltage
PA sensor enabled
RSSWGO67
Short term fuel trim minimum
Speed limiter rpm
Speed limiter speed
Start emissions reduction enabled
Target VTC on decel
TPlate Normal (US)
TPlate opening speed correction
Use MAP to determine WOT(Off=1,On=0)
VTC enabled
VTEC disengage minimum speed
VTEC engage minimum speed
VTEC minimum coolant temperature
VTEC oil pressure switch enabled
Water temperature ignition retard