#### ALL FULL DEFINITIONS PARAMETERS ####



#### ALL GENERATED DEFINITIONS PARAMETERS ####
AFM enabled
Air temperature fuel compensation cranking
Boost control fixed duty
Calibration ID
Cam angle high
Closed loop target lambda high load
Closed loop target lambda limit
Closed loop target lambda low load
Coolant thermostat temperature check enabled (P0128)
Default PA value
EGR enabled
ELD enabled
EPS enabled
EVAP leak detection enabled (P0455 P0456 P0457)
Idle speed (after start)
Idle speed (normal)
Ignition dwell angle voltage compensation
Ignition dwell angle
Ignition high #1
Knock retard high
Knock sensitivity high
Knock sensitivity low
Knock sensor enabled
Maximum plate deviation (P2101)
Misfire detection
Overrun injector restart rpm (cut)
Overrun injector restart rpm (recover)
Overrun throttle opening (rev hang) enabled(Off=160,On=137)
PA vs MAP error enabled (P2227)
Primary oxygen sensor enabled
Purge/EVAP enabled
Radiator fan off
RSSWGO67
RSSWGOF121 Fuel level sensor error
Second ECT sensor enabled
Secondary oxygen sensor enabled
Speed limiter rpm
Speed limiter speed
SWINJOK
SWM9VINOUT
System control register 1
Tip in fuel ECT compensation
Tip in fuel throttle compensation
VSA enabled
VTC base duty cycle
WOT lambda adjustment high #3
WOT lambda adjustment low #1
WOT lambda adjustment low #3
Zero VTC upon decel fuel cut(Off=9,On=9819)