DEFAULT_START_PORT=20000                         #默认起始端口
DEFAULT_SOCKS_USERNAME="userb"                   #默认socks账号
DEFAULT_SOCKS_PASSWORD="passwordb"               #默认socks密码
DEFAULT_WS_PATH="/ws"                            #默认ws路径
DEFAULT_UUID=$(cat /proc/sys/kernel/random/uuid) #默认随机UUID

IP_ADDRESSES=($(hostname -I))

install_xray() {
	echo "安装 Xray..."
	apt-get install unzip -y || yum install unzip -y
	wget https://github.com/XTLS/Xray-core/releases/download/v1.8.3/Xray-linux-64.zip
	unzip Xray-linux-64.zip
	mv xray /usr/local/bin/xrayL
	chmod +x /usr/local/bin/xrayL
	cat <<EOF >/etc/systemd/system/xrayL.service
[Unit]
Description=XrayL Service
After=network.target

[Service]
ExecStart=/usr/local/bin/xrayL -c /etc/xrayL/config.toml
Restart=on-failure
User=nobody
RestartSec=3

[Install]
WantedBy=multi-user.target
EOF
	systemctl daemon-reload
	systemctl enable xrayL.service
	systemctl start xrayL.service
	echo "Xray 安装完成."
}
config_xray() {
	config_type=$1
	mkdir -p /etc/xrayL
	if [ "$config_type" != "socks" ] && [ "$config_type" != "vmess" ]; then
		echo "类型错误！仅支持socks和vmess."
		exit 1
	fi

	read -p "起始端口 (默认 $DEFAULT_START_PORT): " START_PORT
	START_PORT=${START_PORT:-$DEFAULT_START_PORT}
	if [ "$config_type" == "socks" ]; then
		read -p "SOCKS 账号 (默认 $DEFAULT_SOCKS_USERNAME): " SOCKS_USERNAME
		SOCKS_USERNAME=${SOCKS_USERNAME:-$DEFAULT_SOCKS_USERNAME}

		read -p "SOCKS 密码 (默认 $DEFAULT_SOCKS_PASSWORD): " SOCKS_PASSWORD
		SOCKS_PASSWORD=${SOCKS_PASSWORD:-$DEFAULT_SOCKS_PASSWORD}
	elif [ "$config_type" == "vmess" ]; then
		read -p "UUID (默认随机): " UUID
		UUID=${UUID:-$DEFAULT_UUID}
		read -p "WebSocket 路径 (默认 $DEFAULT_WS_PATH): " WS_PATH
		WS_PATH=${WS_PATH:-$DEFAULT_WS_PATH}
	fi

	for ((i = 0; i < ${#IP_ADDRESSES[@]}; i++)); do
		config_content+="[[inbounds]]\n"
		config_content+="port = $((START_PORT + i))\n"
		config_content+="protocol = \"$config_type\"\n"
		config_content+="tag = \"tag_$((i + 1))\"\n"
		config_content+="[inbounds.settings]\n"
		if [ "$config_type" == "socks" ]; then
			config_content+="auth = \"password\"\n"
			config_content+="udp = true\n"
			config_content+="ip = \"${IP_ADDRESSES[i]}\"\n"
			config_content+="[[inbounds.settings.accounts]]\n"
			config_content+="user = \"$SOCKS_USERNAME\"\n"
			config_content+="pass = \"$SOCKS_PASSWORD\"\n"
		elif [ "$config_type" == "vmess" ]; then
			config_content+="[[inbounds.settings.clients]]\n"
			config_content+="id = \"$UUID\"\n"
			config_content+="[inbounds.streamSettings]\n"
			config_content+="network = \"ws\"\n"
			config_content+="[inbounds.streamSettings.wsSettings]\n"
			config_content+="path = \"$WS_PATH\"\n\n"
		fi
		config_content+="[[outbounds]]\n"
		config_content+="sendThrough = \"${IP_ADDRESSES[i]}\"\n"
		config_content+="protocol = \"freedom\"\n"
		config_content+="tag = \"tag_$((i + 1))\"\n\n"
		config_content+="[[routing.rules]]\n"
		config_content+="type = \"field\"\n"
		config_content+="inboundTag = \"tag_$((i + 1))\"\n"
		config_content+="outboundTag = \"tag_$((i + 1))\"\n\n\n"
	done
	echo -e "$config_content" >/etc/xrayL/config.toml
	systemctl restart xrayL.service
	systemctl --no-pager status xrayL.service
	echo ""
	echo "生成 $config_type 配置完成"
	echo "起始端口:$START_PORT"
	echo "结束端口:$(($START_PORT + $i - 1))"
	if [ "$config_type" == "socks" ]; then
		echo "socks账号:$SOCKS_USERNAME"
		echo "socks密码:$SOCKS_PASSWORD"
	elif [ "$config_type" == "vmess" ]; then
		echo "UUID:$UUID"
		echo "ws路径:$WS_PATH"
	fi
	echo ""
}
main() {
	[ -x "$(command -v xrayL)" ] || install_xray
	if [ $# -eq 1 ]; then
		config_type="$1"
	else
		read -p "选择生成的节点类型 (socks/vmess): " config_type
	fi
	if [ "$config_type" == "vmess" ]; then
		config_xray "vmess"
	elif [ "$config_type" == "socks" ]; then
		config_xray "socks"
	else
		echo "未正确选择类型，使用默认sokcs配置."
		config_xray "socks"
	fi
}
main "$@"