---
apiVersion: v1
kind: ConfigMap
metadata:
  name: cilium-config
  namespace: kube-system
data:
  # This etcd-config contains the etcd endpoints of your cluster. If you use
  # TLS please make sure you follow the tutorial in https://cilium.link/etcd-config
  etcd-config: |-
    ---
    endpoints:
      - http://127.0.0.1:31079
    #
    # In case you want to use TLS in etcd, uncomment the 'ca-file' line
    # and create a kubernetes secret by following the tutorial in
    # https://cilium.link/etcd-config
    #ca-file: '/var/lib/etcd-secrets/etcd-ca'
    #
    # In case you want client to server authentication, uncomment the following
    # lines and create a kubernetes secret by following the tutorial in
    # https://cilium.link/etcd-config
    #key-file: '/var/lib/etcd-secrets/etcd-client-key'
    #cert-file: '/var/lib/etcd-secrets/etcd-client-crt'

  # If you want to run cilium in debug mode change this value to true
  debug: "false"
  disable-ipv4: "false"

  # If a serious issue occurs during Cilium startup, this
  # invasive option may be set to true to remove all persistent
  # state. Endpoints will not be restored using knowledge from a
  # prior Cilium run, so they may receive new IP addresses upon
  # restart. This also triggers clean-cilium-bpf-state.
  clean-cilium-state: "false"
  # If you want to clean cilium BPF state, set this to true;
  # Removes all BPF maps from the filesystem. Upon restart,
  # endpoints are restored with the same IP addresses, however
  # any ongoing connections may be disrupted briefly.
  # Loadbalancing decisions will be reset, so any ongoing
  # connections via a service may be loadbalanced to a different
  # backend after restart.
  clean-cilium-bpf-state: "false"

  legacy-host-allows-world: "false"

  # If you want cilium monitor to aggregate tracing for packets, set this level
  # to "low", "medium", or "maximum". The higher the level, the less packets
  # that will be seen in monitor output.
  monitor-aggregation-level: "none"

  # ct-global-max-entries-* specifies the maximum number of connections
  # supported across all endpoints, split by protocol: tcp or other. One pair
  # of maps uses these values for IPv4 connections, and another pair of maps
  # use these values for IPv6 connections.
  #
  # If these values are modified, then during the next Cilium startup the
  # tracking of ongoing connections may be disrupted. This may lead to brief
  # policy drops or a change in loadbalancing decisions for a connection.
  #
  # For users upgrading from Cilium 1.2 or earlier, to minimize disruption
  # during the upgrade process, comment out these options.
  ct-global-max-entries-tcp: "524288"
  ct-global-max-entries-other: "262144"

  # Regular expression matching compatible Istio sidecar istio-proxy
  # container image names
  sidecar-istio-proxy-image: "cilium/istio_proxy"

  # Encapsulation mode for communication between nodes
  # Possible values:
  #   - disabled
  #   - vxlan (default)
  #   - geneve
  tunnel: "vxlan"

  # Name of the cluster. Only relevant when building a mesh of clusters.
  cluster-name: default

  # Unique ID of the cluster. Must be unique across all conneted clusters and
  # in the range of 1 and 255. Only relevant when building a mesh of clusters.
  #cluster-id: 1
---
apiVersion: apps/v1beta2
kind: DaemonSet
metadata:
  name: cilium
  namespace: kube-system
spec:
  updateStrategy:
    type: "RollingUpdate"
    rollingUpdate:
      # Specifies the maximum number of Pods that can be unavailable during the update process.
      maxUnavailable: 2
  selector:
    matchLabels:
      k8s-app: cilium
      kubernetes.io/cluster-service: "true"
  template:
    metadata:
      labels:
        k8s-app: cilium
        kubernetes.io/cluster-service: "true"
      annotations:
        # This annotation plus the CriticalAddonsOnly toleration makes
        # cilium to be a critical pod in the cluster, which ensures cilium
        # gets priority scheduling.
        # https://kubernetes.io/docs/tasks/administer-cluster/guaranteed-scheduling-critical-addon-pods/
        scheduler.alpha.kubernetes.io/critical-pod: ''
        scheduler.alpha.kubernetes.io/tolerations: >-
          [{"key":"dedicated","operator":"Equal","value":"master","effect":"NoSchedule"}]
        prometheus.io/scrape: "true"
        prometheus.io/port: "9090"
    spec:
      serviceAccountName: cilium
      initContainers:
        - name: clean-cilium-state
          image: docker.io/library/busybox:1.28.4
          imagePullPolicy: IfNotPresent
          command: ['sh', '-c', 'rm /var/run/cilium/cilium.pid; rm /var/run/cilium/state/health-endpoint.pid; if [ "${CLEAN_CILIUM_STATE}" = "true" ]; then rm -rf /var/run/cilium/state; fi; if [ "${CLEAN_CILIUM_STATE}" = "true" ] || [ "${CLEAN_CILIUM_BPF_STATE}" = "true" ]; then rm -rf /sys/fs/bpf/tc/globals/cilium_* /var/run/cilium/bpffs/tc/globals/cilium_*; fi']
          securityContext:
            capabilities:
              add:
                - "NET_ADMIN"
            privileged: true
          volumeMounts:
            - name: bpf-maps
              mountPath: /sys/fs/bpf
            - name: cilium-run
              mountPath: /var/run/cilium
          env:
            - name: "CLEAN_CILIUM_STATE"
              valueFrom:
                configMapKeyRef:
                  name: cilium-config
                  optional: true
                  key: clean-cilium-state
            - name: "CLEAN_CILIUM_BPF_STATE"
              valueFrom:
                configMapKeyRef:
                  name: cilium-config
                  optional: true
                  key: clean-cilium-bpf-state
      containers:
        - image: docker.io/cilium/cilium:v1.3.8
          imagePullPolicy: IfNotPresent
          name: cilium-agent
          command: ["cilium-agent"]
          args:
            - "--debug=$(CILIUM_DEBUG)"
            - "--kvstore=etcd"
            - "--kvstore-opt=etcd.config=/var/lib/etcd-config/etcd.config"
            - "--disable-ipv4=$(DISABLE_IPV4)"
          ports:
            - name: prometheus
              containerPort: 9090
          lifecycle:
            postStart:
              exec:
                command:
                  - "/cni-install.sh"
            preStop:
              exec:
                command:
                  - "/cni-uninstall.sh"
          env:
            - name: "K8S_NODE_NAME"
              valueFrom:
                fieldRef:
                  fieldPath: spec.nodeName
            - name: "CILIUM_DEBUG"
              valueFrom:
                configMapKeyRef:
                  name: cilium-config
                  key: debug
            - name: "DISABLE_IPV4"
              valueFrom:
                configMapKeyRef:
                  name: cilium-config
                  key: disable-ipv4
            # Note: this variable is a no-op if not defined, and is used in the
            # prometheus examples.
            - name: "CILIUM_PROMETHEUS_SERVE_ADDR"
              valueFrom:
                configMapKeyRef:
                  name: cilium-metrics-config
                  optional: true
                  key: prometheus-serve-addr
            - name: "CILIUM_LEGACY_HOST_ALLOWS_WORLD"
              valueFrom:
                configMapKeyRef:
                  name: cilium-config
                  optional: true
                  key: legacy-host-allows-world
            - name: "CILIUM_SIDECAR_ISTIO_PROXY_IMAGE"
              valueFrom:
                configMapKeyRef:
                  name: cilium-config
                  key: sidecar-istio-proxy-image
                  optional: true
            - name: "CILIUM_TUNNEL"
              valueFrom:
                configMapKeyRef:
                  key: tunnel
                  name: cilium-config
                  optional: true
            - name: "CILIUM_MONITOR_AGGREGATION_LEVEL"
              valueFrom:
                configMapKeyRef:
                  key: monitor-aggregation-level
                  name: cilium-config
                  optional: true
            - name: CILIUM_CLUSTERMESH_CONFIG
              value: "/var/lib/cilium/clustermesh/"
            - name: CILIUM_CLUSTER_NAME
              valueFrom:
                configMapKeyRef:
                  key: cluster-name
                  name: cilium-config
                  optional: true
            - name: CILIUM_CLUSTER_ID
              valueFrom:
                configMapKeyRef:
                  key: cluster-id
                  name: cilium-config
                  optional: true
            - name: CILIUM_GLOBAL_CT_MAX_TCP
              valueFrom:
                configMapKeyRef:
                  key: ct-global-max-entries-tcp
                  name: cilium-config
                  optional: true
            - name: CILIUM_GLOBAL_CT_MAX_ANY
              valueFrom:
                configMapKeyRef:
                  key: ct-global-max-entries-other
                  name: cilium-config
                  optional: true
          livenessProbe:
            exec:
              command:
                - cilium
                - status
            # The initial delay for the liveness probe is intentionally large to
            # avoid an endless kill & restart cycle if in the event that the initial
            # bootstrapping takes longer than expected.
            initialDelaySeconds: 120
            failureThreshold: 10
            periodSeconds: 10
          readinessProbe:
            exec:
              command:
                - cilium
                - status
            initialDelaySeconds: 5
            periodSeconds: 5
          volumeMounts:
            - name: bpf-maps
              mountPath: /sys/fs/bpf
            - name: cilium-run
              mountPath: /var/run/cilium
            - name: cni-path
              mountPath: /host/opt/cni/bin
            - name: etc-cni-netd
              mountPath: /host/etc/cni/net.d
            - name: docker-socket
              mountPath: /var/run/docker.sock
              readOnly: true
            - name: etcd-config-path
              mountPath: /var/lib/etcd-config
              readOnly: true
            - name: etcd-secrets
              mountPath: /var/lib/etcd-secrets
              readOnly: true
            - name: clustermesh-secrets
              mountPath: /var/lib/cilium/clustermesh
              readOnly: true
          securityContext:
            capabilities:
              add:
                - "NET_ADMIN"
            privileged: true
      dnsPolicy: ClusterFirstWithHostNet
      hostNetwork: true
      volumes:
        # To keep state between restarts / upgrades
        - name: cilium-run
          hostPath:
            path: /var/run/cilium
            type: "DirectoryOrCreate"
        # To keep state between restarts / upgrades for bpf maps
        - name: bpf-maps
          hostPath:
            path: /sys/fs/bpf
            type: "DirectoryOrCreate"
        # To read docker events from the node
        - name: docker-socket
          hostPath:
            path: /var/run/docker.sock
            type: "Socket"
        # To install cilium cni plugin in the host
        - name: cni-path
          hostPath:
            path: /opt/cni/bin
            type: "DirectoryOrCreate"
        # To install cilium cni configuration in the host
        - name: etc-cni-netd
          hostPath:
            path: /etc/cni/net.d
            type: "DirectoryOrCreate"
        # To read the etcd config stored in config maps
        - name: etcd-config-path
          configMap:
            name: cilium-config
            items:
              - key: etcd-config
                path: etcd.config
        # To read the k8s etcd secrets in case the user might want to use TLS
        - name: etcd-secrets
          secret:
            secretName: cilium-etcd-secrets
            optional: true
        # To read the clustermesh configuration
        - name: clustermesh-secrets
          secret:
            defaultMode: 420
            optional: true
            secretName: cilium-clustermesh
      restartPolicy: Always
      terminationGracePeriodSeconds: 1
      tolerations:
        - effect: NoSchedule
          key: node.kubernetes.io/not-ready
          operator: "Exists"
        - effect: NoSchedule
          key: node-role.kubernetes.io/master
          operator: "Exists"
        - effect: NoSchedule
          key: node.cloudprovider.kubernetes.io/uninitialized
          operator: "Exists"
        # Mark cilium's pod as critical for rescheduling
        - key: CriticalAddonsOnly
          operator: "Exists"
---
apiVersion: rbac.authorization.k8s.io/v1beta1
kind: ClusterRoleBinding
metadata:
  name: cilium
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: cilium
subjects:
  - kind: ServiceAccount
    name: cilium
    namespace: kube-system
  - kind: Group
    name: system:nodes
---
apiVersion: rbac.authorization.k8s.io/v1beta1
kind: ClusterRole
metadata:
  name: cilium
rules:
  - apiGroups:
      - "networking.k8s.io"
    resources:
      - networkpolicies
    verbs:
      - get
      - list
      - watch
  - apiGroups:
      - ""
    resources:
      - namespaces
      - services
      - nodes
      - endpoints
      - componentstatuses
    verbs:
      - get
      - list
      - watch
  - apiGroups:
      - ""
    resources:
      - pods
      - nodes
    verbs:
      - get
      - list
      - watch
      - update
  - apiGroups:
      - extensions
    resources:
      - ingresses
    verbs:
      - create
      - get
      - list
      - watch
  - apiGroups:
      - "apiextensions.k8s.io"
    resources:
      - customresourcedefinitions
    verbs:
      - create
      - get
      - list
      - watch
      - update
  - apiGroups:
      - cilium.io
    resources:
      - ciliumnetworkpolicies
      - ciliumnetworkpolicies/status
      - ciliumendpoints
      - ciliumendpoints/status
    verbs:
      - "*"
---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: cilium
  namespace: kube-system