{ "document": { "acknowledgments": [ { "organization": "Siemens", "summary": "reported these vulnerabilities to CISA." } ], "category": "csaf_security_advisory", "csaf_version": "2.0", "distribution": { "text": "Disclosure is not limited", "tlp": { "label": "WHITE", "url": "https://www.cisa.gov/news-events/news/traffic-light-protocol-tlp-definitions-and-usage" } }, "lang": "en", "notes": [ { "category": "summary", "text": "Multiple SICAM 8 products are affected by multiple vulnerabilities that could lead to denial of service, namely:\n\n- \nSICAM A8000 Device firmware\n\n- CPCI85 for CP-8031/CP-8050\n- SICORE for CP-8010/CP-8012 \n\n\n- \nSICAM EGS Device firmware\n\n- CPCI85\n\n\n- \nSICAM S8000\n\n- SICORE\n\n\n\nSiemens has released new versions for the affected products and recommends to update to the latest versions.", "title": "Summary" }, { "category": "general", "text": "Operators of critical power systems (e.g. TSOs or DSOs) worldwide are usually required by regulations to build resilience into the power grids by applying multi-level redundant secondary protection schemes. It is therefore recommended that the operators check whether appropriate resilient protection measures are in place. The risk of cyber incidents impacting the grid's reliability can thus be minimized by virtue of the grid design.\nSiemens strongly recommends applying the provided security updates using the corresponding tooling and documented procedures made available with the product. If supported by the product, an automated means to apply the security updates across multiple product instances may be used. Siemens strongly recommends prior validation of any security update before being applied, and supervision by trained staff of the update process in the target environment. \nAs a general security measure Siemens strongly recommends to protect network access with appropriate mechanisms (e.g. firewalls, segmentation, VPN). It is advised to configure the environment according to our operational guidelines in order to run the devices in a protected IT environment.\n\nRecommended security guidelines can be found at:\nhttps://www.siemens.com/gridsecurity", "title": "General Recommendations" }, { "category": "general", "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact Siemens: https://www.siemens.com/cert/advisories", "title": "Additional Resources" }, { "category": "legal_disclaimer", "text": "The use of Siemens Security Advisories is subject to the terms and conditions listed on: https://www.siemens.com/productcert/terms-of-use.", "title": "Terms of Use" }, { "category": "legal_disclaimer", "text": "This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).", "title": "Legal Notice and Terms of Use" }, { "category": "other", "text": "This ICSA is a verbatim republication of Siemens SSA-229470 from a direct conversion of the vendor's Common Security Advisory Framework (CSAF) advisory. This is republished to CISA's website as a means of increasing visibility and is provided \"as-is\" for informational purposes only. CISA is not responsible for the editorial or technical accuracy of republished advisories and provides no warranties of any kind regarding any information contained within this advisory. Further, CISA does not endorse any commercial product or service. Please contact Siemens directly for any questions regarding this advisory.", "title": "Advisory Conversion Disclaimer" }, { "category": "general", "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability. Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet. Locate control system networks and remote devices behind firewalls and isolate them from business networks. When remote access is required, use more secure methods, such as virtual private networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.", "title": "Recommended Practices" }, { "category": "general", "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.", "title": "Recommended Practices" }, { "category": "general", "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.", "title": "Recommended Practices" }, { "category": "general", "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.", "title": "Recommended Practices" }, { "category": "general", "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.", "title": "Recommended Practices" }, { "category": "other", "text": "Critical Manufacturing, Energy", "title": "Critical infrastructure sectors" }, { "category": "other", "text": "Worldwide", "title": "Countries/areas deployed" }, { "category": "other", "text": "Germany", "title": "Company headquarters location" } ], "publisher": { "category": "other", "contact_details": "central@cisa.dhs.gov", "name": "CISA", "namespace": "https://www.cisa.gov/" }, "references": [ { "category": "self", "summary": "SSA-229470: Multiple Vulnerabilities in SICAM 8 Products Before V26.20 - CSAF Version", "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-229470.json" }, { "category": "self", "summary": "SSA-229470: Multiple Vulnerabilities in SICAM 8 Products Before V26.20 - HTML Version", "url": "https://cert-portal.siemens.com/productcert/html/ssa-229470.html" }, { "category": "self", "summary": "ICS Advisory ICSA-26-197-05 JSON", "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2026/icsa-26-197-05.json" }, { "category": "self", "summary": "ICS Advisory ICSA-26-197-05 - Web Version", "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-26-197-05" }, { "category": "external", "summary": "Recommended Practices", "url": "https://www.cisa.gov/news-events/ics-alerts/ics-alert-10-301-01" }, { "category": "external", "summary": "Recommended Practices", "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices" }, { "category": "external", "summary": "Recommended Practices", "url": "https://www.cisa.gov/topics/industrial-control-systems" }, { "category": "external", "summary": "Recommended Practices", "url": "https://www.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf" }, { "category": "external", "summary": "Recommended Practices", "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf" }, { "category": "external", "summary": "Recommended Practices", "url": "https://www.cisa.gov/news-events/news/targeted-cyber-intrusion-detection-and-mitigation-strategies-update-b" } ], "title": "Siemens SICAM 8", "tracking": { "current_release_date": "2026-07-16T06:00:00.000000Z", "generator": { "date": "2026-07-15T20:37:08.926079Z", "engine": { "name": "CISA CSAF Generator", "version": "1.5.0" } }, "id": "ICSA-26-197-05", "initial_release_date": "2026-07-09T00:00:00.000000Z", "revision_history": [ { "date": "2026-07-09T00:00:00.000000Z", "legacy_version": "Initial", "number": "1", "summary": "Publication Date" }, { "date": "2026-07-16T06:00:00.000000Z", "legacy_version": "CISA Republication", "number": "2", "summary": "Initial CISA Republication of Siemens SSA-229470 advisory" } ], "status": "final", "version": "2" } }, "product_tree": { "branches": [ { "branches": [ { "branches": [ { "category": "product_version_range", "name": "vers:intdot/<26.20", "product": { "name": "CPCI85 Central Processing/Communication < V26.20", "product_id": "CSAFPID-0001" } } ], "category": "product_name", "name": "CPCI85 Central Processing/Communication" }, { "branches": [ { "category": "product_version_range", "name": "vers:intdot/<26.20.0", "product": { "name": "SICORE Base system < V26.20.0", "product_id": "CSAFPID-0002" } } ], "category": "product_name", "name": "SICORE Base system" } ], "category": "vendor", "name": "Siemens" } ] }, "vulnerabilities": [ { "cve": "CVE-2026-54798", "cwe": { "id": "CWE-489", "name": "Active Debug Code" }, "notes": [ { "category": "description", "text": "The affected application includes a debugging interface that is accessible through HTTP endpoints. This could allow an authenticated attacker to disrupt the system by crashing the web process causing denial of service conditions.", "title": "CVE Description" } ], "product_status": { "known_affected": [ "CSAFPID-0001", "CSAFPID-0002" ] }, "references": [ { "category": "external", "summary": "www.cve.org", "url": "https://www.cve.org/CVERecord?id=CVE-2026-54798" }, { "category": "external", "summary": "cwe.mitre.org", "url": "https://cwe.mitre.org/data/definitions/489.html" }, { "category": "external", "summary": "www.first.org", "url": "https://www.first.org/cvss/calculator/3.1#CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H" } ], "remediations": [ { "category": "vendor_fix", "details": "Update to V26.20 or later version \n\nThe firmware CPCI85 V26.20 is present within \u201cCP-8031/CP-8050 Package\u201d V26.20\n\nhttps://support.industry.siemens.com/cs/ww/en/view/109804985/\n\nand also within \u201cSICAM EGS Package\u201d V26.20\n\nhttps://support.industry.siemens.com/cs/document/109972536/", "product_ids": [ "CSAFPID-0001" ] }, { "category": "vendor_fix", "details": "Update to V26.20.0 or later version \n\nThe firmware SICORE V26.20.0 is present within \u201cCP-8010/CP-8012 Package\u201d V26.20\n\nhttps://support.industry.siemens.com/cs/ww/en/view/109972894/ and also within \u201cSICAM S8000 Package\u201d V26.20 \n\nhttps://support.industry.siemens.com/cs/document/109818240", "product_ids": [ "CSAFPID-0002" ] } ], "scores": [ { "cvss_v3": { "baseScore": 6.5, "baseSeverity": "MEDIUM", "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.1" }, "products": [ "CSAFPID-0001", "CSAFPID-0002" ] } ], "title": "CVE-2026-54798" }, { "cve": "CVE-2026-54799", "cwe": { "id": "CWE-489", "name": "Active Debug Code" }, "notes": [ { "category": "description", "text": "The affected application contains a vulnerability in its firmware update mechanism's signature validation process. This could allow an attacker to install malicious firmware, leading to persistent code execution and system compromise.", "title": "CVE Description" } ], "product_status": { "known_affected": [ "CSAFPID-0001", "CSAFPID-0002" ] }, "references": [ { "category": "external", "summary": "www.cve.org", "url": "https://www.cve.org/CVERecord?id=CVE-2026-54799" }, { "category": "external", "summary": "cwe.mitre.org", "url": "https://cwe.mitre.org/data/definitions/489.html" }, { "category": "external", "summary": "www.first.org", "url": "https://www.first.org/cvss/calculator/3.1#CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H" } ], "remediations": [ { "category": "vendor_fix", "details": "Update to V26.20 or later version \n\nThe firmware CPCI85 V26.20 is present within \u201cCP-8031/CP-8050 Package\u201d V26.20\n\nhttps://support.industry.siemens.com/cs/ww/en/view/109804985/\n\nand also within \u201cSICAM EGS Package\u201d V26.20\n\nhttps://support.industry.siemens.com/cs/document/109972536/", "product_ids": [ "CSAFPID-0001" ] }, { "category": "vendor_fix", "details": "Update to V26.20.0 or later version \n\nThe firmware SICORE V26.20.0 is present within \u201cCP-8010/CP-8012 Package\u201d V26.20\n\nhttps://support.industry.siemens.com/cs/ww/en/view/109972894/ and also within \u201cSICAM S8000 Package\u201d V26.20 \n\nhttps://support.industry.siemens.com/cs/document/109818240", "product_ids": [ "CSAFPID-0002" ] } ], "scores": [ { "cvss_v3": { "baseScore": 6.7, "baseSeverity": "MEDIUM", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H", "version": "3.1" }, "products": [ "CSAFPID-0001", "CSAFPID-0002" ] } ], "title": "CVE-2026-54799" }, { "cve": "CVE-2026-54800", "cwe": { "id": "CWE-1188", "name": "Initialization of a Resource with an Insecure Default" }, "notes": [ { "category": "description", "text": "The affected application ships with a default configuration that disables all OPC UA security mechanisms. This could allow an attacker to gain unauthorized access and control over critical system functions.", "title": "CVE Description" } ], "product_status": { "known_affected": [ "CSAFPID-0001", "CSAFPID-0002" ] }, "references": [ { "category": "external", "summary": "www.cve.org", "url": "https://www.cve.org/CVERecord?id=CVE-2026-54800" }, { "category": "external", "summary": "cwe.mitre.org", "url": "https://cwe.mitre.org/data/definitions/1188.html" }, { "category": "external", "summary": "www.first.org", "url": "https://www.first.org/cvss/calculator/3.1#CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N" } ], "remediations": [ { "category": "vendor_fix", "details": "Update to V26.20 or later version \n\nThe firmware CPCI85 V26.20 is present within \u201cCP-8031/CP-8050 Package\u201d V26.20\n\nhttps://support.industry.siemens.com/cs/ww/en/view/109804985/\n\nand also within \u201cSICAM EGS Package\u201d V26.20\n\nhttps://support.industry.siemens.com/cs/document/109972536/", "product_ids": [ "CSAFPID-0001" ] }, { "category": "vendor_fix", "details": "Update to V26.20.0 or later version \n\nThe firmware SICORE V26.20.0 is present within \u201cCP-8010/CP-8012 Package\u201d V26.20\n\nhttps://support.industry.siemens.com/cs/ww/en/view/109972894/ and also within \u201cSICAM S8000 Package\u201d V26.20 \n\nhttps://support.industry.siemens.com/cs/document/109818240", "product_ids": [ "CSAFPID-0002" ] } ], "scores": [ { "cvss_v3": { "baseScore": 4.8, "baseSeverity": "MEDIUM", "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N", "version": "3.1" }, "products": [ "CSAFPID-0001", "CSAFPID-0002" ] } ], "title": "CVE-2026-54800" }, { "cve": "CVE-2026-54801", "cwe": { "id": "CWE-620", "name": "Unverified Password Change" }, "notes": [ { "category": "description", "text": "The affected application contains insufficient validation of authentication credentials when processing administrative account modifications through the web API. This could allow an authenticated attacker to bypass security controls and gain unauthorized elevated privileges.", "title": "CVE Description" } ], "product_status": { "known_affected": [ "CSAFPID-0001", "CSAFPID-0002" ] }, "references": [ { "category": "external", "summary": "www.cve.org", "url": "https://www.cve.org/CVERecord?id=CVE-2026-54801" }, { "category": "external", "summary": "cwe.mitre.org", "url": "https://cwe.mitre.org/data/definitions/620.html" }, { "category": "external", "summary": "www.first.org", "url": "https://www.first.org/cvss/calculator/3.1#CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H" } ], "remediations": [ { "category": "vendor_fix", "details": "Update to V26.20 or later version \n\nThe firmware CPCI85 V26.20 is present within \u201cCP-8031/CP-8050 Package\u201d V26.20\n\nhttps://support.industry.siemens.com/cs/ww/en/view/109804985/\n\nand also within \u201cSICAM EGS Package\u201d V26.20\n\nhttps://support.industry.siemens.com/cs/document/109972536/", "product_ids": [ "CSAFPID-0001" ] }, { "category": "vendor_fix", "details": "Update to V26.20.0 or later version \n\nThe firmware SICORE V26.20.0 is present within \u201cCP-8010/CP-8012 Package\u201d V26.20\n\nhttps://support.industry.siemens.com/cs/ww/en/view/109972894/ and also within \u201cSICAM S8000 Package\u201d V26.20 \n\nhttps://support.industry.siemens.com/cs/document/109818240", "product_ids": [ "CSAFPID-0002" ] } ], "scores": [ { "cvss_v3": { "baseScore": 7.2, "baseSeverity": "HIGH", "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H", "version": "3.1" }, "products": [ "CSAFPID-0001", "CSAFPID-0002" ] } ], "title": "CVE-2026-54801" } ] }