-- ***************************************************************** -- MEP-MIB: Vitesse private MIB -- -- Copyright (c) 2002-2013 Vitesse Semiconductor Corporation "Vitesse". -- All Rights Reserved. -- -- **************************************************************** ME1200-MEP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC me1200SwitchMgmt FROM CISCOME1200-MIB Unsigned32 FROM SNMPv2-SMI Integer32 FROM SNMPv2-SMI ME1200InterfaceIndex FROM ME1200-TC ME1200Unsigned16 FROM ME1200-TC TruthValue FROM SNMPv2-TC MacAddress FROM SNMPv2-TC ME1200DisplayString FROM ME1200-TC ME1200RowEditorState FROM ME1200-TC ME1200Unsigned8 FROM ME1200-TC Counter64 FROM SNMPv2-SMI ; me1200MepMib MODULE-IDENTITY LAST-UPDATED "201402250000Z" ORGANIZATION "Vitesse Semiconductor Corporation" CONTACT-INFO "Henrik Bjornlund " DESCRIPTION "This is a private service OAM (Y.1731/G802.1ag) MIB" REVISION "201402250000Z" DESCRIPTION "MIB has been added to support Dynamic CCM TLV in the MEP module" REVISION "201402180000Z" DESCRIPTION "Do no use Unsigned32 for indexes" REVISION "201401290000Z" DESCRIPTION "Locate all objects under ciscoME1200MIB" REVISION "201310240000Z" DESCRIPTION "Initial version" ::= { me1200SwitchMgmt 46 } ME1200InstanceMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The instance mode." SYNTAX INTEGER { mep(0), mip(1) } ME1200InstanceDirection ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The instance direction." SYNTAX INTEGER { down(0), up(1) } ME1200InstanceDomain ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The instance domain." SYNTAX INTEGER { port(0), evc(1), vlan(2) } ME1200MegIdFormat ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The MEG-ID format." SYNTAX INTEGER { ituIcc(0), ieeeString(1), ituCcIcc(2) } ME1200Rate ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "PDU transmission rate." SYNTAX INTEGER { invalid(0), frames300PerSecond(1), frames100PerSecond(2), frames10PerSecond(3), frames1PerSecond(4), frames6PerMinute(5), frames1PerMinute(6), frames6PerHour(7) } ME1200Ended ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Dual/single ended selection." SYNTAX INTEGER { singleEnded(0), dualEnded(1) } ME1200Cast ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Unicast or Multicast selection." SYNTAX INTEGER { uniCast(0), multiCast(1) } ME1200CalcWay ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Round trip or flow calculation way selection." SYNTAX INTEGER { roundTrip(0), flow(1) } ME1200Tunit ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Calculation time unit." SYNTAX INTEGER { microSeconds(0), nanoSeconds(1) } ME1200Action ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Action when internal total delay counter overflow." SYNTAX INTEGER { disableDm(0), continueDm(1) } ME1200TstPattern ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Pattern in TST frame Data TLV." SYNTAX INTEGER { allZero(0), allOne(1), hexAA(2) } ME1200ApsType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Type of APS." SYNTAX INTEGER { invalidAps(0), linearAps(1), ringAps(2) } ME1200RelayAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Link Trace relay action." SYNTAX INTEGER { relayUnknown(0), relayHit(1), relayFdb(2), relayMpdb(3) } me1200MepMibObjects OBJECT IDENTIFIER ::= { me1200MepMib 1 } me1200MepCapabilities OBJECT IDENTIFIER ::= { me1200MepMibObjects 1 } me1200MepCapabilitiesInstanceMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max number of MEP instance" ::= { me1200MepCapabilities 1 } me1200MepCapabilitiesPeerMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max number of peer MEP" ::= { me1200MepCapabilities 2 } me1200MepCapabilitiesTransactionMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max number of Link Trace transaction" ::= { me1200MepCapabilities 3 } me1200MepCapabilitiesReplyMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max number of reply in a transaction" ::= { me1200MepCapabilities 4 } me1200MepCapabilitiesClientFlowsMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max number of client flows" ::= { me1200MepCapabilities 5 } me1200MepCapabilitiesMacMength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "MAC length" ::= { me1200MepCapabilities 6 } me1200MepCapabilitiesMegCodeLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "MAX length of Both Maintenance Domain Name and MEG-ID include a NULL termination" ::= { me1200MepCapabilities 7 } me1200MepCapabilitiesDmIntervalMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "MIN DM transmission interval " ::= { me1200MepCapabilities 8 } me1200MepCapabilitiesDmIntervalMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "MAX DM transmission interval" ::= { me1200MepCapabilities 9 } me1200MepCapabilitiesDmLastnMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "MIN number of DM LastN for average calculation" ::= { me1200MepCapabilities 10 } me1200MepCapabilitiesDmLastnMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "MAX number of DM LastN for average calculation" ::= { me1200MepCapabilities 11 } me1200MepCapabilitiesLbmSizeMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum LBM frame size" ::= { me1200MepCapabilities 12 } me1200MepCapabilitiesLbmSizeMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum LBM frame size" ::= { me1200MepCapabilities 13 } me1200MepCapabilitiesTstSizeMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum TST frame size" ::= { me1200MepCapabilities 14 } me1200MepCapabilitiesTstSizeMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum TST frame size" ::= { me1200MepCapabilities 15 } me1200MepCapabilitiesTstRateMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum TST bit rate" ::= { me1200MepCapabilities 16 } me1200MepCapabilitiesClientPrioHighest OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest possible client priority is requested" ::= { me1200MepCapabilities 17 } me1200MepConfig OBJECT IDENTIFIER ::= { me1200MepMibObjects 2 } me1200ConfigInstance OBJECT IDENTIFIER ::= { me1200MepConfig 1 } me1200ConfigInstanceTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200ConfigInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of created instance configuration parameters" ::= { me1200ConfigInstance 1 } me1200ConfigInstanceEntry OBJECT-TYPE SYNTAX ME1200ConfigInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a created instance configuration parameters. Not all parameters can be changed" INDEX { me1200ConfigInstanceId } ::= { me1200ConfigInstanceTable 1 } ME1200ConfigInstanceEntry ::= SEQUENCE { me1200ConfigInstanceId Integer32, me1200ConfigInstanceMode ME1200InstanceMode, me1200ConfigInstanceDirection ME1200InstanceDirection, me1200ConfigInstanceDomain ME1200InstanceDomain, me1200ConfigInstanceFlow Unsigned32, me1200ConfigInstancePort ME1200InterfaceIndex, me1200ConfigInstanceLevel Unsigned32, me1200ConfigInstanceVid ME1200Unsigned16, me1200ConfigInstanceVoe TruthValue, me1200ConfigInstanceMac MacAddress, me1200ConfigInstanceFormat ME1200MegIdFormat, me1200ConfigInstanceName ME1200DisplayString, me1200ConfigInstanceMeg ME1200DisplayString, me1200ConfigInstanceMep Unsigned32, me1200ConfigInstanceAction ME1200RowEditorState } me1200ConfigInstanceId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigInstanceEntry 1 } me1200ConfigInstanceMode OBJECT-TYPE SYNTAX ME1200InstanceMode MAX-ACCESS read-write STATUS current DESCRIPTION "The instance mode. Cannot be changed after creation." ::= { me1200ConfigInstanceEntry 2 } me1200ConfigInstanceDirection OBJECT-TYPE SYNTAX ME1200InstanceDirection MAX-ACCESS read-write STATUS current DESCRIPTION "The instance direction. Cannot be changed after creation." ::= { me1200ConfigInstanceEntry 3 } me1200ConfigInstanceDomain OBJECT-TYPE SYNTAX ME1200InstanceDomain MAX-ACCESS read-write STATUS current DESCRIPTION "The instance domain. Cannot be changed after creation." ::= { me1200ConfigInstanceEntry 4 } me1200ConfigInstanceFlow OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The flow instance (VLAN - EVC). Cannot be changed after creation." ::= { me1200ConfigInstanceEntry 5 } me1200ConfigInstancePort OBJECT-TYPE SYNTAX ME1200InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The instance residence port. Cannot be changed after creation." ::= { me1200ConfigInstanceEntry 6 } me1200ConfigInstanceLevel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The instance level" ::= { me1200ConfigInstanceEntry 7 } me1200ConfigInstanceVid OBJECT-TYPE SYNTAX ME1200Unsigned16 MAX-ACCESS read-write STATUS current DESCRIPTION "VID used for tagged Port domain OAM. Create a VLAN MEP instead - if possible" ::= { me1200ConfigInstanceEntry 8 } me1200ConfigInstanceVoe OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Make the instance VOE based - if possible" ::= { me1200ConfigInstanceEntry 9 } me1200ConfigInstanceMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The instance unicast MAC. If 'all zero' the residence port MAC is used" ::= { me1200ConfigInstanceEntry 10 } me1200ConfigInstanceFormat OBJECT-TYPE SYNTAX ME1200MegIdFormat MAX-ACCESS read-write STATUS current DESCRIPTION "The MEG-ID format" ::= { me1200ConfigInstanceEntry 11 } me1200ConfigInstanceName OBJECT-TYPE SYNTAX ME1200DisplayString (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "IEEE Maintenance Domain Name (string)" ::= { me1200ConfigInstanceEntry 12 } me1200ConfigInstanceMeg OBJECT-TYPE SYNTAX ME1200DisplayString (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Unique MEG ID (string)" ::= { me1200ConfigInstanceEntry 13 } me1200ConfigInstanceMep OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "MEP id of this instance" ::= { me1200ConfigInstanceEntry 14 } me1200ConfigInstanceAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigInstanceEntry 100 } me1200ConfigInstanceRowEditor OBJECT IDENTIFIER ::= { me1200ConfigInstance 2 } me1200ConfigInstanceRowEditorId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigInstanceRowEditor 1 } me1200ConfigInstanceRowEditorMode OBJECT-TYPE SYNTAX ME1200InstanceMode MAX-ACCESS read-write STATUS current DESCRIPTION "The instance mode. Cannot be changed after creation." ::= { me1200ConfigInstanceRowEditor 2 } me1200ConfigInstanceRowEditorDirection OBJECT-TYPE SYNTAX ME1200InstanceDirection MAX-ACCESS read-write STATUS current DESCRIPTION "The instance direction. Cannot be changed after creation." ::= { me1200ConfigInstanceRowEditor 3 } me1200ConfigInstanceRowEditorDomain OBJECT-TYPE SYNTAX ME1200InstanceDomain MAX-ACCESS read-write STATUS current DESCRIPTION "The instance domain. Cannot be changed after creation." ::= { me1200ConfigInstanceRowEditor 4 } me1200ConfigInstanceRowEditorFlow OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The flow instance (VLAN - EVC). Cannot be changed after creation." ::= { me1200ConfigInstanceRowEditor 5 } me1200ConfigInstanceRowEditorPort OBJECT-TYPE SYNTAX ME1200InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The instance residence port. Cannot be changed after creation." ::= { me1200ConfigInstanceRowEditor 6 } me1200ConfigInstanceRowEditorLevel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The instance level" ::= { me1200ConfigInstanceRowEditor 7 } me1200ConfigInstanceRowEditorVid OBJECT-TYPE SYNTAX ME1200Unsigned16 MAX-ACCESS read-write STATUS current DESCRIPTION "VID used for tagged Port domain OAM. Create a VLAN MEP instead - if possible" ::= { me1200ConfigInstanceRowEditor 8 } me1200ConfigInstanceRowEditorVoe OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Make the instance VOE based - if possible" ::= { me1200ConfigInstanceRowEditor 9 } me1200ConfigInstanceRowEditorMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The instance unicast MAC. If 'all zero' the residence port MAC is used" ::= { me1200ConfigInstanceRowEditor 10 } me1200ConfigInstanceRowEditorFormat OBJECT-TYPE SYNTAX ME1200MegIdFormat MAX-ACCESS read-write STATUS current DESCRIPTION "The MEG-ID format" ::= { me1200ConfigInstanceRowEditor 11 } me1200ConfigInstanceRowEditorName OBJECT-TYPE SYNTAX ME1200DisplayString (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "IEEE Maintenance Domain Name (string)" ::= { me1200ConfigInstanceRowEditor 12 } me1200ConfigInstanceRowEditorMeg OBJECT-TYPE SYNTAX ME1200DisplayString (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Unique MEG ID (string)" ::= { me1200ConfigInstanceRowEditor 13 } me1200ConfigInstanceRowEditorMep OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "MEP id of this instance" ::= { me1200ConfigInstanceRowEditor 14 } me1200ConfigInstanceRowEditorAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigInstanceRowEditor 100 } me1200ConfigInstancePeerTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200ConfigInstancePeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of peer MEP configuration parameters" ::= { me1200ConfigInstance 3 } me1200ConfigInstancePeerEntry OBJECT-TYPE SYNTAX ME1200ConfigInstancePeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a peer MEP configuration parameters" INDEX { me1200ConfigInstancePeerId, me1200ConfigInstancePeerPeerId } ::= { me1200ConfigInstancePeerTable 1 } ME1200ConfigInstancePeerEntry ::= SEQUENCE { me1200ConfigInstancePeerId Integer32, me1200ConfigInstancePeerPeerId Integer32, me1200ConfigInstancePeerMac MacAddress, me1200ConfigInstancePeerAction ME1200RowEditorState } me1200ConfigInstancePeerId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigInstancePeerEntry 1 } me1200ConfigInstancePeerPeerId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Peer MEP ID" ::= { me1200ConfigInstancePeerEntry 2 } me1200ConfigInstancePeerMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The peer unicast MAC" ::= { me1200ConfigInstancePeerEntry 3 } me1200ConfigInstancePeerAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigInstancePeerEntry 100 } me1200ConfigInstancePeerRowEditor OBJECT IDENTIFIER ::= { me1200ConfigInstance 4 } me1200ConfigInstancePeerRowEditorId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigInstancePeerRowEditor 1 } me1200ConfigInstancePeerRowEditorPeerId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The Peer MEP ID" ::= { me1200ConfigInstancePeerRowEditor 2 } me1200ConfigInstancePeerRowEditorMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The peer unicast MAC" ::= { me1200ConfigInstancePeerRowEditor 3 } me1200ConfigInstancePeerRowEditorAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigInstancePeerRowEditor 100 } me1200ConfigPerfMon OBJECT IDENTIFIER ::= { me1200MepConfig 2 } me1200ConfigPmTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200ConfigPmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of created instance Performance Monitoring configuration parameters" ::= { me1200ConfigPerfMon 1 } me1200ConfigPmEntry OBJECT-TYPE SYNTAX ME1200ConfigPmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a created instance Performance Monitoring configuration parameters" INDEX { me1200ConfigPmId } ::= { me1200ConfigPmTable 1 } ME1200ConfigPmEntry ::= SEQUENCE { me1200ConfigPmId Integer32, me1200ConfigPmEnable TruthValue } me1200ConfigPmId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigPmEntry 1 } me1200ConfigPmEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The instance can enable contribution of LM and DM results to the Performance Monitoring " ::= { me1200ConfigPmEntry 2 } me1200ConfigContinuityCheck OBJECT IDENTIFIER ::= { me1200MepConfig 3 } me1200ConfigCcTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200ConfigCcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of created instance Continuity Check configuration parameters" ::= { me1200ConfigContinuityCheck 1 } me1200ConfigCcEntry OBJECT-TYPE SYNTAX ME1200ConfigCcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a created instance Continuity Check configuration parameters." INDEX { me1200ConfigCcId } ::= { me1200ConfigCcTable 1 } ME1200ConfigCcEntry ::= SEQUENCE { me1200ConfigCcId Integer32, me1200ConfigCcDei ME1200Unsigned8, me1200ConfigCcPrio Unsigned32, me1200ConfigCcRate ME1200Rate, me1200ConfigCcTlv TruthValue, me1200ConfigCcAction ME1200RowEditorState } me1200ConfigCcId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigCcEntry 1 } me1200ConfigCcDei OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Drop Eligibility Indicator of transmitted CCM" ::= { me1200ConfigCcEntry 2 } me1200ConfigCcPrio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of the transmitted CCM. Range 0 to 7" ::= { me1200ConfigCcEntry 3 } me1200ConfigCcRate OBJECT-TYPE SYNTAX ME1200Rate MAX-ACCESS read-write STATUS current DESCRIPTION "CCM transmission and expected reception rate" ::= { me1200ConfigCcEntry 4 } me1200ConfigCcTlv OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable insertion of TLV in CCM PDU. OS, PS and IS TLV are inserted" ::= { me1200ConfigCcEntry 5 } me1200ConfigCcAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigCcEntry 100 } me1200ConfigCcRowEditor OBJECT IDENTIFIER ::= { me1200ConfigContinuityCheck 2 } me1200ConfigCcRowEditorId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigCcRowEditor 1 } me1200ConfigCcRowEditorDei OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Drop Eligibility Indicator of transmitted CCM" ::= { me1200ConfigCcRowEditor 2 } me1200ConfigCcRowEditorPrio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of the transmitted CCM. Range 0 to 7" ::= { me1200ConfigCcRowEditor 3 } me1200ConfigCcRowEditorRate OBJECT-TYPE SYNTAX ME1200Rate MAX-ACCESS read-write STATUS current DESCRIPTION "CCM transmission and expected reception rate" ::= { me1200ConfigCcRowEditor 4 } me1200ConfigCcRowEditorTlv OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable insertion of TLV in CCM PDU. OS, PS and IS TLV are inserted" ::= { me1200ConfigCcRowEditor 5 } me1200ConfigCcRowEditorAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigCcRowEditor 100 } me1200ConfigLossMeasurement OBJECT IDENTIFIER ::= { me1200MepConfig 4 } me1200ConfigLmTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200ConfigLmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of created instance Loss Measurement configuration parameters" ::= { me1200ConfigLossMeasurement 1 } me1200ConfigLmEntry OBJECT-TYPE SYNTAX ME1200ConfigLmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a created instance Loss Measurement parameters." INDEX { me1200ConfigLmId } ::= { me1200ConfigLmTable 1 } ME1200ConfigLmEntry ::= SEQUENCE { me1200ConfigLmId Integer32, me1200ConfigLmEnded ME1200Ended, me1200ConfigLmDei ME1200Unsigned8, me1200ConfigLmPrio Unsigned32, me1200ConfigLmRate ME1200Rate, me1200ConfigLmCast ME1200Cast, me1200ConfigLmFlrInterval Unsigned32, me1200ConfigLmAction ME1200RowEditorState } me1200ConfigLmId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigLmEntry 1 } me1200ConfigLmEnded OBJECT-TYPE SYNTAX ME1200Ended MAX-ACCESS read-write STATUS current DESCRIPTION "Dual/single ended selection. CCM or LMM/LMR based. Cannot be changed after creation." ::= { me1200ConfigLmEntry 2 } me1200ConfigLmDei OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Drop Eligibility Indicator of transmitted LM PDU" ::= { me1200ConfigLmEntry 3 } me1200ConfigLmPrio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of the transmitted LM PDU. Range 0 to 7" ::= { me1200ConfigLmEntry 4 } me1200ConfigLmRate OBJECT-TYPE SYNTAX ME1200Rate MAX-ACCESS read-write STATUS current DESCRIPTION "LM PDU transmission rate" ::= { me1200ConfigLmEntry 5 } me1200ConfigLmCast OBJECT-TYPE SYNTAX ME1200Cast MAX-ACCESS read-write STATUS current DESCRIPTION "Uni/Multicast selection - on CCM based LM only multicast is possible" ::= { me1200ConfigLmEntry 6 } me1200ConfigLmFlrInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Frame loss ratio time interval in sec." ::= { me1200ConfigLmEntry 7 } me1200ConfigLmAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigLmEntry 101 } me1200ConfigLmRowEditor OBJECT IDENTIFIER ::= { me1200ConfigLossMeasurement 2 } me1200ConfigLmRowEditorId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigLmRowEditor 1 } me1200ConfigLmRowEditorEnded OBJECT-TYPE SYNTAX ME1200Ended MAX-ACCESS read-write STATUS current DESCRIPTION "Dual/single ended selection. CCM or LMM/LMR based. Cannot be changed after creation." ::= { me1200ConfigLmRowEditor 2 } me1200ConfigLmRowEditorDei OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Drop Eligibility Indicator of transmitted LM PDU" ::= { me1200ConfigLmRowEditor 3 } me1200ConfigLmRowEditorPrio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of the transmitted LM PDU. Range 0 to 7" ::= { me1200ConfigLmRowEditor 4 } me1200ConfigLmRowEditorRate OBJECT-TYPE SYNTAX ME1200Rate MAX-ACCESS read-write STATUS current DESCRIPTION "LM PDU transmission rate" ::= { me1200ConfigLmRowEditor 5 } me1200ConfigLmRowEditorCast OBJECT-TYPE SYNTAX ME1200Cast MAX-ACCESS read-write STATUS current DESCRIPTION "Uni/Multicast selection - on CCM based LM only multicast is possible" ::= { me1200ConfigLmRowEditor 6 } me1200ConfigLmRowEditorFlrInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Frame loss ratio time interval in sec." ::= { me1200ConfigLmRowEditor 7 } me1200ConfigLmRowEditorAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigLmRowEditor 101 } me1200ConfigDelayMeasurement OBJECT IDENTIFIER ::= { me1200MepConfig 5 } me1200ConfigDmTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200ConfigDmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of created instance Delay Measurement configuration parameters" ::= { me1200ConfigDelayMeasurement 1 } me1200ConfigDmEntry OBJECT-TYPE SYNTAX ME1200ConfigDmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a created instance Delay Measurement parameters." INDEX { me1200ConfigDmId } ::= { me1200ConfigDmTable 1 } ME1200ConfigDmEntry ::= SEQUENCE { me1200ConfigDmId Integer32, me1200ConfigDmEnded ME1200Ended, me1200ConfigDmDei ME1200Unsigned8, me1200ConfigDmPrio Unsigned32, me1200ConfigDmCast ME1200Cast, me1200ConfigDmMep Unsigned32, me1200ConfigDmCalcWay ME1200CalcWay, me1200ConfigDmInterval Unsigned32, me1200ConfigDmLastN Unsigned32, me1200ConfigDmTimeUnit ME1200Tunit, me1200ConfigDmOverflowAct ME1200Action, me1200ConfigDmSynchronized TruthValue, me1200ConfigDmAction ME1200RowEditorState } me1200ConfigDmId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigDmEntry 1 } me1200ConfigDmEnded OBJECT-TYPE SYNTAX ME1200Ended MAX-ACCESS read-write STATUS current DESCRIPTION "Dual/single ended selection. CCM or LMM/LMR based. Cannot be changed after creation." ::= { me1200ConfigDmEntry 2 } me1200ConfigDmDei OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Drop Eligibility Indicator of transmitted DM PDU" ::= { me1200ConfigDmEntry 3 } me1200ConfigDmPrio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of the transmitted DM PDU. Range 0 to 7" ::= { me1200ConfigDmEntry 4 } me1200ConfigDmCast OBJECT-TYPE SYNTAX ME1200Cast MAX-ACCESS read-write STATUS current DESCRIPTION "Uni/Multicast selection" ::= { me1200ConfigDmEntry 5 } me1200ConfigDmMep OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Peer MEP to receive DMM/1DM - only used if unicast" ::= { me1200ConfigDmEntry 6 } me1200ConfigDmCalcWay OBJECT-TYPE SYNTAX ME1200CalcWay MAX-ACCESS read-write STATUS current DESCRIPTION "Round trip or flow calculation way selection." ::= { me1200ConfigDmEntry 7 } me1200ConfigDmInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Interval between 1DM/DMM in 10 ms. 10 to 65535." ::= { me1200ConfigDmEntry 8 } me1200ConfigDmLastN OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of last N measurements used to calculate average delay and variation. 10 to 100." ::= { me1200ConfigDmEntry 9 } me1200ConfigDmTimeUnit OBJECT-TYPE SYNTAX ME1200Tunit MAX-ACCESS read-write STATUS current DESCRIPTION "Calculation time unit." ::= { me1200ConfigDmEntry 10 } me1200ConfigDmOverflowAct OBJECT-TYPE SYNTAX ME1200Action MAX-ACCESS read-write STATUS current DESCRIPTION "Action when internal total delay counter overflow." ::= { me1200ConfigDmEntry 11 } me1200ConfigDmSynchronized OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Near-end and far-end is real-time synchronized. One-way DM calculation on receiving DMR." ::= { me1200ConfigDmEntry 12 } me1200ConfigDmAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigDmEntry 101 } me1200ConfigDmRowEditor OBJECT IDENTIFIER ::= { me1200ConfigDelayMeasurement 2 } me1200ConfigDmRowEditorId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigDmRowEditor 1 } me1200ConfigDmRowEditorEnded OBJECT-TYPE SYNTAX ME1200Ended MAX-ACCESS read-write STATUS current DESCRIPTION "Dual/single ended selection. CCM or LMM/LMR based. Cannot be changed after creation." ::= { me1200ConfigDmRowEditor 2 } me1200ConfigDmRowEditorDei OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Drop Eligibility Indicator of transmitted DM PDU" ::= { me1200ConfigDmRowEditor 3 } me1200ConfigDmRowEditorPrio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of the transmitted DM PDU. Range 0 to 7" ::= { me1200ConfigDmRowEditor 4 } me1200ConfigDmRowEditorCast OBJECT-TYPE SYNTAX ME1200Cast MAX-ACCESS read-write STATUS current DESCRIPTION "Uni/Multicast selection" ::= { me1200ConfigDmRowEditor 5 } me1200ConfigDmRowEditorMep OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Peer MEP to receive DMM/1DM - only used if unicast" ::= { me1200ConfigDmRowEditor 6 } me1200ConfigDmRowEditorCalcWay OBJECT-TYPE SYNTAX ME1200CalcWay MAX-ACCESS read-write STATUS current DESCRIPTION "Round trip or flow calculation way selection." ::= { me1200ConfigDmRowEditor 7 } me1200ConfigDmRowEditorInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Interval between 1DM/DMM in 10 ms. 10 to 65535." ::= { me1200ConfigDmRowEditor 8 } me1200ConfigDmRowEditorLastN OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of last N measurements used to calculate average delay and variation. 10 to 100." ::= { me1200ConfigDmRowEditor 9 } me1200ConfigDmRowEditorTimeUnit OBJECT-TYPE SYNTAX ME1200Tunit MAX-ACCESS read-write STATUS current DESCRIPTION "Calculation time unit." ::= { me1200ConfigDmRowEditor 10 } me1200ConfigDmRowEditorOverflowAct OBJECT-TYPE SYNTAX ME1200Action MAX-ACCESS read-write STATUS current DESCRIPTION "Action when internal total delay counter overflow." ::= { me1200ConfigDmRowEditor 11 } me1200ConfigDmRowEditorSynchronized OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Near-end and far-end is real-time synchronized. One-way DM calculation on receiving DMR." ::= { me1200ConfigDmRowEditor 12 } me1200ConfigDmRowEditorAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigDmRowEditor 101 } me1200ConfigLoopBack OBJECT IDENTIFIER ::= { me1200MepConfig 6 } me1200ConfigLbTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200ConfigLbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of created instance Loop Back configuration parameters" ::= { me1200ConfigLoopBack 1 } me1200ConfigLbEntry OBJECT-TYPE SYNTAX ME1200ConfigLbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a created instance Loop Back parameters. This cannot be changed" INDEX { me1200ConfigLbId } ::= { me1200ConfigLbTable 1 } ME1200ConfigLbEntry ::= SEQUENCE { me1200ConfigLbId Integer32, me1200ConfigLbDei ME1200Unsigned8, me1200ConfigLbPrio Unsigned32, me1200ConfigLbCast ME1200Cast, me1200ConfigLbMep Unsigned32, me1200ConfigLbMac MacAddress, me1200ConfigLbToSend Unsigned32, me1200ConfigLbSize Unsigned32, me1200ConfigLbInterval Unsigned32, me1200ConfigLbAction ME1200RowEditorState } me1200ConfigLbId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigLbEntry 1 } me1200ConfigLbDei OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Drop Eligibility Indicator of transmitted LBM PDU" ::= { me1200ConfigLbEntry 2 } me1200ConfigLbPrio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of the transmitted LBM PDU. Range 0 to 7" ::= { me1200ConfigLbEntry 3 } me1200ConfigLbCast OBJECT-TYPE SYNTAX ME1200Cast MAX-ACCESS read-write STATUS current DESCRIPTION "Uni/Multicast selection" ::= { me1200ConfigLbEntry 4 } me1200ConfigLbMep OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Peer MEP to receive LBM - only used if unicast and 'mac' is 'all zero'." ::= { me1200ConfigLbEntry 5 } me1200ConfigLbMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Unicast MAC address to receive LBM - has to be used to send LBM to MIP." ::= { me1200ConfigLbEntry 6 } me1200ConfigLbToSend OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of LBM to send. 0 => test behaviour. Requires VOE." ::= { me1200ConfigLbEntry 7 } me1200ConfigLbSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Size of LBM frame to send - max. 9600 - min. 64" ::= { me1200ConfigLbEntry 8 } me1200ConfigLbInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Frame interval. If 'ToSend' != 0 the 'Interval' is in 10 ms. Max 1 s. If 'ToSend' == 0 the 'Interval' is in 1 us. Max 10 ms." ::= { me1200ConfigLbEntry 9 } me1200ConfigLbAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigLbEntry 101 } me1200ConfigLbRowEditor OBJECT IDENTIFIER ::= { me1200ConfigLoopBack 2 } me1200ConfigLbRowEditorId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigLbRowEditor 1 } me1200ConfigLbRowEditorDei OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Drop Eligibility Indicator of transmitted LBM PDU" ::= { me1200ConfigLbRowEditor 2 } me1200ConfigLbRowEditorPrio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of the transmitted LBM PDU. Range 0 to 7" ::= { me1200ConfigLbRowEditor 3 } me1200ConfigLbRowEditorCast OBJECT-TYPE SYNTAX ME1200Cast MAX-ACCESS read-write STATUS current DESCRIPTION "Uni/Multicast selection" ::= { me1200ConfigLbRowEditor 4 } me1200ConfigLbRowEditorMep OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Peer MEP to receive LBM - only used if unicast and 'mac' is 'all zero'." ::= { me1200ConfigLbRowEditor 5 } me1200ConfigLbRowEditorMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Unicast MAC address to receive LBM - has to be used to send LBM to MIP." ::= { me1200ConfigLbRowEditor 6 } me1200ConfigLbRowEditorToSend OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of LBM to send. 0 => test behaviour. Requires VOE." ::= { me1200ConfigLbRowEditor 7 } me1200ConfigLbRowEditorSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Size of LBM frame to send - max. 9600 - min. 64" ::= { me1200ConfigLbRowEditor 8 } me1200ConfigLbRowEditorInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Frame interval. If 'ToSend' != 0 the 'Interval' is in 10 ms. Max 1 s. If 'ToSend' == 0 the 'Interval' is in 1 us. Max 10 ms." ::= { me1200ConfigLbRowEditor 9 } me1200ConfigLbRowEditorAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigLbRowEditor 101 } me1200ConfigTestSignal OBJECT IDENTIFIER ::= { me1200MepConfig 7 } me1200ConfigTstTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200ConfigTstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of created instance Test Signal configuration parameters" ::= { me1200ConfigTestSignal 1 } me1200ConfigTstEntry OBJECT-TYPE SYNTAX ME1200ConfigTstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a created instance Test Signal parameters." INDEX { me1200ConfigTstId } ::= { me1200ConfigTstTable 1 } ME1200ConfigTstEntry ::= SEQUENCE { me1200ConfigTstId Integer32, me1200ConfigTstTxEnable TruthValue, me1200ConfigTstRxEnable TruthValue, me1200ConfigTstDei ME1200Unsigned8, me1200ConfigTstPrio Unsigned32, me1200ConfigTstMep Unsigned32, me1200ConfigTstRate Unsigned32, me1200ConfigTstSize Unsigned32, me1200ConfigTstPattern ME1200TstPattern, me1200ConfigTstSequence TruthValue, me1200ConfigTstAction ME1200RowEditorState } me1200ConfigTstId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigTstEntry 1 } me1200ConfigTstTxEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable transmission of TST PDU." ::= { me1200ConfigTstEntry 2 } me1200ConfigTstRxEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable reception and analyse of TST PDU." ::= { me1200ConfigTstEntry 3 } me1200ConfigTstDei OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Drop Eligibility Indicator of transmitted TST PDU" ::= { me1200ConfigTstEntry 4 } me1200ConfigTstPrio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of the transmitted TST PDU. Range 0 to 7" ::= { me1200ConfigTstEntry 5 } me1200ConfigTstMep OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Peer MEP to receive TST" ::= { me1200ConfigTstEntry 6 } me1200ConfigTstRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The transmission rate in Kbps - max 2500000 - min 1." ::= { me1200ConfigTstEntry 7 } me1200ConfigTstSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Size of TST frame to send - max. 9600 - min. 64." ::= { me1200ConfigTstEntry 8 } me1200ConfigTstPattern OBJECT-TYPE SYNTAX ME1200TstPattern MAX-ACCESS read-write STATUS current DESCRIPTION "Pattern in TST frame Data TLV." ::= { me1200ConfigTstEntry 9 } me1200ConfigTstSequence OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Sequence number will be inserted - not checked in receiver on Caracal and Jaguar." ::= { me1200ConfigTstEntry 10 } me1200ConfigTstAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigTstEntry 101 } me1200ConfigTstRowEditor OBJECT IDENTIFIER ::= { me1200ConfigTestSignal 2 } me1200ConfigTstRowEditorId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigTstRowEditor 1 } me1200ConfigTstRowEditorTxEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable transmission of TST PDU." ::= { me1200ConfigTstRowEditor 2 } me1200ConfigTstRowEditorRxEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable reception and analyse of TST PDU." ::= { me1200ConfigTstRowEditor 3 } me1200ConfigTstRowEditorDei OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Drop Eligibility Indicator of transmitted TST PDU" ::= { me1200ConfigTstRowEditor 4 } me1200ConfigTstRowEditorPrio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of the transmitted TST PDU. Range 0 to 7" ::= { me1200ConfigTstRowEditor 5 } me1200ConfigTstRowEditorMep OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Peer MEP to receive TST" ::= { me1200ConfigTstRowEditor 6 } me1200ConfigTstRowEditorRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The transmission rate in Kbps - max 2500000 - min 1." ::= { me1200ConfigTstRowEditor 7 } me1200ConfigTstRowEditorSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Size of TST frame to send - max. 9600 - min. 64." ::= { me1200ConfigTstRowEditor 8 } me1200ConfigTstRowEditorPattern OBJECT-TYPE SYNTAX ME1200TstPattern MAX-ACCESS read-write STATUS current DESCRIPTION "Pattern in TST frame Data TLV." ::= { me1200ConfigTstRowEditor 9 } me1200ConfigTstRowEditorSequence OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Sequence number will be inserted - not checked in receiver on Caracal and Jaguar." ::= { me1200ConfigTstRowEditor 10 } me1200ConfigTstRowEditorAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigTstRowEditor 101 } me1200ConfigLinkTrace OBJECT IDENTIFIER ::= { me1200MepConfig 8 } me1200ConfigLtTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200ConfigLtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of created instance Link Trace configuration parameters" ::= { me1200ConfigLinkTrace 1 } me1200ConfigLtEntry OBJECT-TYPE SYNTAX ME1200ConfigLtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a created instance Link Trace parameters. This cannot be changed" INDEX { me1200ConfigLtId } ::= { me1200ConfigLtTable 1 } ME1200ConfigLtEntry ::= SEQUENCE { me1200ConfigLtId Integer32, me1200ConfigLtDei ME1200Unsigned8, me1200ConfigLtPrio Unsigned32, me1200ConfigLtMep Unsigned32, me1200ConfigLtMac MacAddress, me1200ConfigLtTimeToLive Unsigned32, me1200ConfigLtAction ME1200RowEditorState } me1200ConfigLtId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigLtEntry 1 } me1200ConfigLtDei OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Drop Eligibility Indicator of transmitted LTM PDU" ::= { me1200ConfigLtEntry 2 } me1200ConfigLtPrio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of the transmitted LTM PDU. Range 0 to 7" ::= { me1200ConfigLtEntry 3 } me1200ConfigLtMep OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Target Peer Mep to receive LTM - only used if 'mac' is 'all zero'" ::= { me1200ConfigLtEntry 4 } me1200ConfigLtMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Unicast MAC address to receive LTM - has to be used to send LTM to MIP." ::= { me1200ConfigLtEntry 5 } me1200ConfigLtTimeToLive OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Time To Live." ::= { me1200ConfigLtEntry 6 } me1200ConfigLtAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigLtEntry 101 } me1200ConfigLtRowEditor OBJECT IDENTIFIER ::= { me1200ConfigLinkTrace 2 } me1200ConfigLtRowEditorId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigLtRowEditor 1 } me1200ConfigLtRowEditorDei OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Drop Eligibility Indicator of transmitted LTM PDU" ::= { me1200ConfigLtRowEditor 2 } me1200ConfigLtRowEditorPrio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of the transmitted LTM PDU. Range 0 to 7" ::= { me1200ConfigLtRowEditor 3 } me1200ConfigLtRowEditorMep OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Target Peer Mep to receive LTM - only used if 'mac' is 'all zero'" ::= { me1200ConfigLtRowEditor 4 } me1200ConfigLtRowEditorMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Unicast MAC address to receive LTM - has to be used to send LTM to MIP." ::= { me1200ConfigLtRowEditor 5 } me1200ConfigLtRowEditorTimeToLive OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Time To Live." ::= { me1200ConfigLtRowEditor 6 } me1200ConfigLtRowEditorAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigLtRowEditor 101 } me1200ConfigAutomaticProtectionSwitching OBJECT IDENTIFIER ::= { me1200MepConfig 9 } me1200ConfigApsTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200ConfigApsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of created instance Automatic Protection Switching configuration parameters" ::= { me1200ConfigAutomaticProtectionSwitching 1 } me1200ConfigApsEntry OBJECT-TYPE SYNTAX ME1200ConfigApsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a created instance Automatic Protection Switching parameters." INDEX { me1200ConfigApsId } ::= { me1200ConfigApsTable 1 } ME1200ConfigApsEntry ::= SEQUENCE { me1200ConfigApsId Integer32, me1200ConfigApsDei ME1200Unsigned8, me1200ConfigApsPrio Unsigned32, me1200ConfigApsApsType ME1200ApsType, me1200ConfigApsCast ME1200Cast, me1200ConfigApsRapsOctet Unsigned32, me1200ConfigApsAction ME1200RowEditorState } me1200ConfigApsId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigApsEntry 1 } me1200ConfigApsDei OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Drop Eligibility Indicator of transmitted APS PDU" ::= { me1200ConfigApsEntry 2 } me1200ConfigApsPrio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of the transmitted APS PDU. Range 0 to 7" ::= { me1200ConfigApsEntry 3 } me1200ConfigApsApsType OBJECT-TYPE SYNTAX ME1200ApsType MAX-ACCESS read-write STATUS current DESCRIPTION "Type of APS" ::= { me1200ConfigApsEntry 4 } me1200ConfigApsCast OBJECT-TYPE SYNTAX ME1200Cast MAX-ACCESS read-write STATUS current DESCRIPTION "Uni/multicast selection" ::= { me1200ConfigApsEntry 5 } me1200ConfigApsRapsOctet OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Last octet in the R-APS multicast DA" ::= { me1200ConfigApsEntry 6 } me1200ConfigApsAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigApsEntry 101 } me1200ConfigApsRowEditor OBJECT IDENTIFIER ::= { me1200ConfigAutomaticProtectionSwitching 2 } me1200ConfigApsRowEditorId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigApsRowEditor 1 } me1200ConfigApsRowEditorDei OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Drop Eligibility Indicator of transmitted APS PDU" ::= { me1200ConfigApsRowEditor 2 } me1200ConfigApsRowEditorPrio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of the transmitted APS PDU. Range 0 to 7" ::= { me1200ConfigApsRowEditor 3 } me1200ConfigApsRowEditorApsType OBJECT-TYPE SYNTAX ME1200ApsType MAX-ACCESS read-write STATUS current DESCRIPTION "Type of APS" ::= { me1200ConfigApsRowEditor 4 } me1200ConfigApsRowEditorCast OBJECT-TYPE SYNTAX ME1200Cast MAX-ACCESS read-write STATUS current DESCRIPTION "Uni/multicast selection" ::= { me1200ConfigApsRowEditor 5 } me1200ConfigApsRowEditorRapsOctet OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Last octet in the R-APS multicast DA" ::= { me1200ConfigApsRowEditor 6 } me1200ConfigApsRowEditorAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigApsRowEditor 101 } me1200ConfigAlarmIndicationSignal OBJECT IDENTIFIER ::= { me1200MepConfig 10 } me1200ConfigAisTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200ConfigAisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of created instance Alarm Indication Signal configuration parameters" ::= { me1200ConfigAlarmIndicationSignal 1 } me1200ConfigAisEntry OBJECT-TYPE SYNTAX ME1200ConfigAisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a created instance Alarm Indication Signal parameters." INDEX { me1200ConfigAisId } ::= { me1200ConfigAisTable 1 } ME1200ConfigAisEntry ::= SEQUENCE { me1200ConfigAisId Integer32, me1200ConfigAisProtection TruthValue, me1200ConfigAisRate ME1200Rate, me1200ConfigAisAction ME1200RowEditorState } me1200ConfigAisId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigAisEntry 1 } me1200ConfigAisProtection OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The first three AIS frames are transmitted as fast as possible." ::= { me1200ConfigAisEntry 2 } me1200ConfigAisRate OBJECT-TYPE SYNTAX ME1200Rate MAX-ACCESS read-write STATUS current DESCRIPTION "AIS transmission rate" ::= { me1200ConfigAisEntry 3 } me1200ConfigAisAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigAisEntry 101 } me1200ConfigAisRowEditor OBJECT IDENTIFIER ::= { me1200ConfigAlarmIndicationSignal 2 } me1200ConfigAisRowEditorId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigAisRowEditor 1 } me1200ConfigAisRowEditorProtection OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The first three AIS frames are transmitted as fast as possible." ::= { me1200ConfigAisRowEditor 2 } me1200ConfigAisRowEditorRate OBJECT-TYPE SYNTAX ME1200Rate MAX-ACCESS read-write STATUS current DESCRIPTION "AIS transmission rate" ::= { me1200ConfigAisRowEditor 3 } me1200ConfigAisRowEditorAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigAisRowEditor 101 } me1200ConfigLockedSignal OBJECT IDENTIFIER ::= { me1200MepConfig 11 } me1200ConfigLckTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200ConfigLckEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of created instance Locked Signal configuration parameters" ::= { me1200ConfigLockedSignal 1 } me1200ConfigLckEntry OBJECT-TYPE SYNTAX ME1200ConfigLckEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a created instance Locked Signal parameters." INDEX { me1200ConfigLckId } ::= { me1200ConfigLckTable 1 } ME1200ConfigLckEntry ::= SEQUENCE { me1200ConfigLckId Integer32, me1200ConfigLckRate ME1200Rate, me1200ConfigLckAction ME1200RowEditorState } me1200ConfigLckId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigLckEntry 1 } me1200ConfigLckRate OBJECT-TYPE SYNTAX ME1200Rate MAX-ACCESS read-write STATUS current DESCRIPTION "LCK transmission rate" ::= { me1200ConfigLckEntry 2 } me1200ConfigLckAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigLckEntry 101 } me1200ConfigLckRowEditor OBJECT IDENTIFIER ::= { me1200ConfigLockedSignal 2 } me1200ConfigLckRowEditorId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigLckRowEditor 1 } me1200ConfigLckRowEditorRate OBJECT-TYPE SYNTAX ME1200Rate MAX-ACCESS read-write STATUS current DESCRIPTION "LCK transmission rate" ::= { me1200ConfigLckRowEditor 2 } me1200ConfigLckRowEditorAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigLckRowEditor 101 } me1200ConfigClient OBJECT IDENTIFIER ::= { me1200MepConfig 12 } me1200ConfigClientTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200ConfigClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of created instance Client configuration parameters" ::= { me1200ConfigClient 1 } me1200ConfigClientEntry OBJECT-TYPE SYNTAX ME1200ConfigClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a created instance Client parameters." INDEX { me1200ConfigClientId } ::= { me1200ConfigClientTable 1 } ME1200ConfigClientEntry ::= SEQUENCE { me1200ConfigClientId Integer32, me1200ConfigClientDomain ME1200InstanceDomain } me1200ConfigClientId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigClientEntry 1 } me1200ConfigClientDomain OBJECT-TYPE SYNTAX ME1200InstanceDomain MAX-ACCESS read-write STATUS current DESCRIPTION "Client layer domain. Can only be VLAN or EVC." ::= { me1200ConfigClientEntry 2 } me1200ConfigClientFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200ConfigClientFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of client flow configuration parameters" ::= { me1200ConfigClient 2 } me1200ConfigClientFlowEntry OBJECT-TYPE SYNTAX ME1200ConfigClientFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a client flow configuration parameters" INDEX { me1200ConfigClientFlowId, me1200ConfigClientFlowFlowId } ::= { me1200ConfigClientFlowTable 1 } ME1200ConfigClientFlowEntry ::= SEQUENCE { me1200ConfigClientFlowId Integer32, me1200ConfigClientFlowFlowId Integer32, me1200ConfigClientFlowAisPrio ME1200Unsigned8, me1200ConfigClientFlowLckPrio ME1200Unsigned8, me1200ConfigClientFlowLevel ME1200Unsigned8, me1200ConfigClientFlowAction ME1200RowEditorState } me1200ConfigClientFlowId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigClientFlowEntry 1 } me1200ConfigClientFlowFlowId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Client Flow id" ::= { me1200ConfigClientFlowEntry 2 } me1200ConfigClientFlowAisPrio OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "AIS Priority (EVC COS-ID) 0-7. 0xFF indicate highest possible is requested" ::= { me1200ConfigClientFlowEntry 3 } me1200ConfigClientFlowLckPrio OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "LCK Priority (EVC COS-ID) 0-7. 0xFF indicate highest possible is requested" ::= { me1200ConfigClientFlowEntry 4 } me1200ConfigClientFlowLevel OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Client flow level" ::= { me1200ConfigClientFlowEntry 5 } me1200ConfigClientFlowAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigClientFlowEntry 100 } me1200ConfigClientFlowRowEditor OBJECT IDENTIFIER ::= { me1200ConfigClient 3 } me1200ConfigClientFlowRowEditorId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigClientFlowRowEditor 1 } me1200ConfigClientFlowRowEditorFlowId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The Client Flow id" ::= { me1200ConfigClientFlowRowEditor 2 } me1200ConfigClientFlowRowEditorAisPrio OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "AIS Priority (EVC COS-ID) 0-7. 0xFF indicate highest possible is requested" ::= { me1200ConfigClientFlowRowEditor 3 } me1200ConfigClientFlowRowEditorLckPrio OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "LCK Priority (EVC COS-ID) 0-7. 0xFF indicate highest possible is requested" ::= { me1200ConfigClientFlowRowEditor 4 } me1200ConfigClientFlowRowEditorLevel OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Client flow level" ::= { me1200ConfigClientFlowRowEditor 5 } me1200ConfigClientFlowRowEditorAction OBJECT-TYPE SYNTAX ME1200RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { me1200ConfigClientFlowRowEditor 100 } me1200ConfigSyslog OBJECT IDENTIFIER ::= { me1200MepConfig 13 } me1200ConfigSyslogTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200ConfigSyslogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of created instance Syslog configuration parameters" ::= { me1200ConfigSyslog 1 } me1200ConfigSyslogEntry OBJECT-TYPE SYNTAX ME1200ConfigSyslogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a created instance Syslog configuration parameters" INDEX { me1200ConfigSyslogId } ::= { me1200ConfigSyslogTable 1 } ME1200ConfigSyslogEntry ::= SEQUENCE { me1200ConfigSyslogId Integer32, me1200ConfigSyslogEnable TruthValue } me1200ConfigSyslogId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ConfigSyslogEntry 1 } me1200ConfigSyslogEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The instance can enable generation of syslog entries " ::= { me1200ConfigSyslogEntry 2 } me1200ConfigTlv OBJECT IDENTIFIER ::= { me1200MepConfig 14 } me1200ConfigTlvLeaf OBJECT IDENTIFIER ::= { me1200ConfigTlv 1 } me1200ConfigTlvLeafOsTlvOuiFirst OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Transmitted OS TLV - The OUI content first nibble" ::= { me1200ConfigTlvLeaf 2 } me1200ConfigTlvLeafOsTlvOuiSecond OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Transmitted OS TLV - The OUI content second nibble" ::= { me1200ConfigTlvLeaf 3 } me1200ConfigTlvLeafOsTlvOuiThird OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Transmitted OS TLV - The OUI content third nibble" ::= { me1200ConfigTlvLeaf 4 } me1200ConfigTlvLeafOsTlvSubType OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Transmitted OS TLV - The Sub-Type content" ::= { me1200ConfigTlvLeaf 5 } me1200ConfigTlvLeafOsTlvValue OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-write STATUS current DESCRIPTION "Transmitted OS TLV - The Value content" ::= { me1200ConfigTlvLeaf 6 } me1200MepStatus OBJECT IDENTIFIER ::= { me1200MepMibObjects 3 } me1200StatusInstance OBJECT IDENTIFIER ::= { me1200MepStatus 1 } me1200StatusInstanceTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200StatusInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of created instance status" ::= { me1200StatusInstance 1 } me1200StatusInstanceEntry OBJECT-TYPE SYNTAX ME1200StatusInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a created instance status" INDEX { me1200StatusInstanceId } ::= { me1200StatusInstanceTable 1 } ME1200StatusInstanceEntry ::= SEQUENCE { me1200StatusInstanceId Integer32, me1200StatusInstanceClevel TruthValue, me1200StatusInstanceCmeg TruthValue, me1200StatusInstanceCmep TruthValue, me1200StatusInstanceCssf TruthValue, me1200StatusInstanceCais TruthValue, me1200StatusInstanceClck TruthValue, me1200StatusInstanceAtsf TruthValue, me1200StatusInstanceAtsd TruthValue, me1200StatusInstanceAblk TruthValue, me1200StatusInstanceCloop TruthValue, me1200StatusInstanceCconfig TruthValue } me1200StatusInstanceId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200StatusInstanceEntry 1 } me1200StatusInstanceClevel OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Incorrect CCM level received" ::= { me1200StatusInstanceEntry 2 } me1200StatusInstanceCmeg OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Incorrect CCM MEG id received" ::= { me1200StatusInstanceEntry 3 } me1200StatusInstanceCmep OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Incorrect CCM MEP id received" ::= { me1200StatusInstanceEntry 4 } me1200StatusInstanceCssf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "SSF state" ::= { me1200StatusInstanceEntry 5 } me1200StatusInstanceCais OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "AIS state. AIS is received." ::= { me1200StatusInstanceEntry 6 } me1200StatusInstanceClck OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Locked State. LCK is received." ::= { me1200StatusInstanceEntry 7 } me1200StatusInstanceAtsf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Trail Signal fail consequent action is calculated" ::= { me1200StatusInstanceEntry 8 } me1200StatusInstanceAtsd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Trail Signal degrade consequent action is calculated" ::= { me1200StatusInstanceEntry 9 } me1200StatusInstanceAblk OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Block consequent action is calculated" ::= { me1200StatusInstanceEntry 10 } me1200StatusInstanceCloop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Loop is detected. CCM is received with own MEP ID and SMAC." ::= { me1200StatusInstanceEntry 11 } me1200StatusInstanceCconfig OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Configuration error detected. CCM is received with own MEP ID." ::= { me1200StatusInstanceEntry 12 } me1200StatusInstancePeerTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200StatusInstancePeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of peer MEP status" ::= { me1200StatusInstance 2 } me1200StatusInstancePeerEntry OBJECT-TYPE SYNTAX ME1200StatusInstancePeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a peer MEP status" INDEX { me1200StatusInstancePeerId, me1200StatusInstancePeerPeerId } ::= { me1200StatusInstancePeerTable 1 } ME1200StatusInstancePeerEntry ::= SEQUENCE { me1200StatusInstancePeerId Integer32, me1200StatusInstancePeerPeerId Integer32, me1200StatusInstancePeerCloc TruthValue, me1200StatusInstancePeerCrdi TruthValue, me1200StatusInstancePeerCperiod TruthValue, me1200StatusInstancePeerCprio TruthValue } me1200StatusInstancePeerId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200StatusInstancePeerEntry 1 } me1200StatusInstancePeerPeerId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Peer MEP ID" ::= { me1200StatusInstancePeerEntry 2 } me1200StatusInstancePeerCloc OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "CCM LOC state from peer MEP" ::= { me1200StatusInstancePeerEntry 3 } me1200StatusInstancePeerCrdi OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "CCM RDI state from peer MEP" ::= { me1200StatusInstancePeerEntry 4 } me1200StatusInstancePeerCperiod OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "CCM Period state from peer MEP" ::= { me1200StatusInstancePeerEntry 5 } me1200StatusInstancePeerCprio OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "CCM Priority state from peer MEP" ::= { me1200StatusInstancePeerEntry 6 } me1200StatusLossMeasurement OBJECT IDENTIFIER ::= { me1200MepStatus 2 } me1200StatusLmTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200StatusLmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of Loss Measurement status" ::= { me1200StatusLossMeasurement 1 } me1200StatusLmEntry OBJECT-TYPE SYNTAX ME1200StatusLmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a Loss Measurement status" INDEX { me1200StatusLmId } ::= { me1200StatusLmTable 1 } ME1200StatusLmEntry ::= SEQUENCE { me1200StatusLmId Integer32, me1200StatusLmTxCounter Unsigned32, me1200StatusLmRxCounter Unsigned32, me1200StatusLmNearEndLosCounter Integer32, me1200StatusLmFarEndLosCounter Integer32, me1200StatusLmNearEndLosRatio Unsigned32, me1200StatusLmFarEndLosRatio Unsigned32 } me1200StatusLmId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200StatusLmEntry 1 } me1200StatusLmTxCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmitted PDU (LMM - CCM) containing counters." ::= { me1200StatusLmEntry 2 } me1200StatusLmRxCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received PDU (LMM - CCM) containing counters." ::= { me1200StatusLmEntry 3 } me1200StatusLmNearEndLosCounter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Near end frame loss counter." ::= { me1200StatusLmEntry 4 } me1200StatusLmFarEndLosCounter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Far end frame loss counter." ::= { me1200StatusLmEntry 5 } me1200StatusLmNearEndLosRatio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Near end frame loss ratio." ::= { me1200StatusLmEntry 6 } me1200StatusLmFarEndLosRatio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Far end frame loss ratio." ::= { me1200StatusLmEntry 7 } me1200StatusDelayMeasurement OBJECT IDENTIFIER ::= { me1200MepStatus 3 } me1200StatusDmTwoWayTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200StatusDmTwoWayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of Delay Measurement Two Way status" ::= { me1200StatusDelayMeasurement 1 } me1200StatusDmTwoWayEntry OBJECT-TYPE SYNTAX ME1200StatusDmTwoWayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a Delay Measurement Two Way status" INDEX { me1200StatusDmTwoWayId } ::= { me1200StatusDmTwoWayTable 1 } ME1200StatusDmTwoWayEntry ::= SEQUENCE { me1200StatusDmTwoWayId Integer32, me1200StatusDmTwoWayTxCounter Unsigned32, me1200StatusDmTwoWayRxCounter Unsigned32, me1200StatusDmTwoWayRxTimeOutCounter Unsigned32, me1200StatusDmTwoWayRxErrorCounter Unsigned32, me1200StatusDmTwoWayInternalOverflowCounter Unsigned32, me1200StatusDmTwoWayAverageDelay Unsigned32, me1200StatusDmTwoWayAverageLastnDelay Unsigned32, me1200StatusDmTwoWayAverageDelayVariation Unsigned32, me1200StatusDmTwoWayAverageLastnDelayVariation Unsigned32, me1200StatusDmTwoWayMinimumDelay Unsigned32, me1200StatusDmTwoWayMaximumDelay Unsigned32, me1200StatusDmTwoWayMinimumDelayVariation Unsigned32, me1200StatusDmTwoWayMaximumDelayVariation Unsigned32, me1200StatusDmTwoWayTimeUnit ME1200Tunit } me1200StatusDmTwoWayId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200StatusDmTwoWayEntry 1 } me1200StatusDmTwoWayTxCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmitted DMM/1DM frames." ::= { me1200StatusDmTwoWayEntry 2 } me1200StatusDmTwoWayRxCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received DMM/1DM frames." ::= { me1200StatusDmTwoWayEntry 3 } me1200StatusDmTwoWayRxTimeOutCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received DMR time-out. After transmission of DMM, the DMR is expected to be received within 1 sec." ::= { me1200StatusDmTwoWayEntry 4 } me1200StatusDmTwoWayRxErrorCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received error counter. It is considered an error if a delay is negative or above 1 sec." ::= { me1200StatusDmTwoWayEntry 5 } me1200StatusDmTwoWayInternalOverflowCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The internal total delay counter overflow counter." ::= { me1200StatusDmTwoWayEntry 6 } me1200StatusDmTwoWayAverageDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total average delay." ::= { me1200StatusDmTwoWayEntry 7 } me1200StatusDmTwoWayAverageLastnDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last N average delay." ::= { me1200StatusDmTwoWayEntry 8 } me1200StatusDmTwoWayAverageDelayVariation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total average delay variation." ::= { me1200StatusDmTwoWayEntry 9 } me1200StatusDmTwoWayAverageLastnDelayVariation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last N average delay variation." ::= { me1200StatusDmTwoWayEntry 10 } me1200StatusDmTwoWayMinimumDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum delay measured." ::= { me1200StatusDmTwoWayEntry 11 } me1200StatusDmTwoWayMaximumDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum delay measured." ::= { me1200StatusDmTwoWayEntry 12 } me1200StatusDmTwoWayMinimumDelayVariation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum delay variation measured." ::= { me1200StatusDmTwoWayEntry 13 } me1200StatusDmTwoWayMaximumDelayVariation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum delay variation measured." ::= { me1200StatusDmTwoWayEntry 14 } me1200StatusDmTwoWayTimeUnit OBJECT-TYPE SYNTAX ME1200Tunit MAX-ACCESS read-only STATUS current DESCRIPTION "Calculation time unit." ::= { me1200StatusDmTwoWayEntry 15 } me1200StatusDmOneWayFarNearTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200StatusDmOneWayFarNearEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of Delay Measurement One Way Far to Near status" ::= { me1200StatusDelayMeasurement 2 } me1200StatusDmOneWayFarNearEntry OBJECT-TYPE SYNTAX ME1200StatusDmOneWayFarNearEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a Delay Measurement Two Way Far to Near status" INDEX { me1200StatusDmOneWayFarNearId } ::= { me1200StatusDmOneWayFarNearTable 1 } ME1200StatusDmOneWayFarNearEntry ::= SEQUENCE { me1200StatusDmOneWayFarNearId Integer32, me1200StatusDmOneWayFarNearTxCounter Unsigned32, me1200StatusDmOneWayFarNearRxCounter Unsigned32, me1200StatusDmOneWayFarNearRxTimeOutCounter Unsigned32, me1200StatusDmOneWayFarNearRxErrorCounter Unsigned32, me1200StatusDmOneWayFarNearInternalOverflowCounter Unsigned32, me1200StatusDmOneWayFarNearAverageDelay Unsigned32, me1200StatusDmOneWayFarNearAverageLastnDelay Unsigned32, me1200StatusDmOneWayFarNearAverageDelayVariation Unsigned32, me1200StatusDmOneWayFarNearAverageLastnDelayVariation Unsigned32, me1200StatusDmOneWayFarNearMinimumDelay Unsigned32, me1200StatusDmOneWayFarNearMaximumDelay Unsigned32, me1200StatusDmOneWayFarNearMinimumDelayVariation Unsigned32, me1200StatusDmOneWayFarNearMaximumDelayVariation Unsigned32, me1200StatusDmOneWayFarNearTimeUnit ME1200Tunit } me1200StatusDmOneWayFarNearId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200StatusDmOneWayFarNearEntry 1 } me1200StatusDmOneWayFarNearTxCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmitted DMM/1DM frames." ::= { me1200StatusDmOneWayFarNearEntry 2 } me1200StatusDmOneWayFarNearRxCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received DMM/1DM frames." ::= { me1200StatusDmOneWayFarNearEntry 3 } me1200StatusDmOneWayFarNearRxTimeOutCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received DMR time-out. After transmission of DMM, the DMR is expected to be received within 1 sec." ::= { me1200StatusDmOneWayFarNearEntry 4 } me1200StatusDmOneWayFarNearRxErrorCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received error counter. It is considered an error if a delay is negative or above 1 sec." ::= { me1200StatusDmOneWayFarNearEntry 5 } me1200StatusDmOneWayFarNearInternalOverflowCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The internal total delay counter overflow counter." ::= { me1200StatusDmOneWayFarNearEntry 6 } me1200StatusDmOneWayFarNearAverageDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total average delay." ::= { me1200StatusDmOneWayFarNearEntry 7 } me1200StatusDmOneWayFarNearAverageLastnDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last N average delay." ::= { me1200StatusDmOneWayFarNearEntry 8 } me1200StatusDmOneWayFarNearAverageDelayVariation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total average delay variation." ::= { me1200StatusDmOneWayFarNearEntry 9 } me1200StatusDmOneWayFarNearAverageLastnDelayVariation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last N average delay variation." ::= { me1200StatusDmOneWayFarNearEntry 10 } me1200StatusDmOneWayFarNearMinimumDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum delay measured." ::= { me1200StatusDmOneWayFarNearEntry 11 } me1200StatusDmOneWayFarNearMaximumDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum delay measured." ::= { me1200StatusDmOneWayFarNearEntry 12 } me1200StatusDmOneWayFarNearMinimumDelayVariation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum delay variation measured." ::= { me1200StatusDmOneWayFarNearEntry 13 } me1200StatusDmOneWayFarNearMaximumDelayVariation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum delay variation measured." ::= { me1200StatusDmOneWayFarNearEntry 14 } me1200StatusDmOneWayFarNearTimeUnit OBJECT-TYPE SYNTAX ME1200Tunit MAX-ACCESS read-only STATUS current DESCRIPTION "Calculation time unit." ::= { me1200StatusDmOneWayFarNearEntry 15 } me1200StatusDmOneWayNearFarTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200StatusDmOneWayNearFarEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of Delay Measurement One Way Near to Far status" ::= { me1200StatusDelayMeasurement 3 } me1200StatusDmOneWayNearFarEntry OBJECT-TYPE SYNTAX ME1200StatusDmOneWayNearFarEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a Delay Measurement Two Way Near to Far status" INDEX { me1200StatusDmOneWayNearFarId } ::= { me1200StatusDmOneWayNearFarTable 1 } ME1200StatusDmOneWayNearFarEntry ::= SEQUENCE { me1200StatusDmOneWayNearFarId Integer32, me1200StatusDmOneWayNearFarTxCounter Unsigned32, me1200StatusDmOneWayNearFarRxCounter Unsigned32, me1200StatusDmOneWayNearFarRxTimeOutCounter Unsigned32, me1200StatusDmOneWayNearFarRxErrorCounter Unsigned32, me1200StatusDmOneWayNearFarInternalOverflowCounter Unsigned32, me1200StatusDmOneWayNearFarAverageDelay Unsigned32, me1200StatusDmOneWayNearFarAverageLastnDelay Unsigned32, me1200StatusDmOneWayNearFarAverageDelayVariation Unsigned32, me1200StatusDmOneWayNearFarAverageLastnDelayVariation Unsigned32, me1200StatusDmOneWayNearFarMinimumDelay Unsigned32, me1200StatusDmOneWayNearFarMaximumDelay Unsigned32, me1200StatusDmOneWayNearFarMinimumDelayVariation Unsigned32, me1200StatusDmOneWayNearFarMaximumDelayVariation Unsigned32, me1200StatusDmOneWayNearFarTimeUnit ME1200Tunit } me1200StatusDmOneWayNearFarId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200StatusDmOneWayNearFarEntry 1 } me1200StatusDmOneWayNearFarTxCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmitted DMM/1DM frames." ::= { me1200StatusDmOneWayNearFarEntry 2 } me1200StatusDmOneWayNearFarRxCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received DMM/1DM frames." ::= { me1200StatusDmOneWayNearFarEntry 3 } me1200StatusDmOneWayNearFarRxTimeOutCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received DMR time-out. After transmission of DMM, the DMR is expected to be received within 1 sec." ::= { me1200StatusDmOneWayNearFarEntry 4 } me1200StatusDmOneWayNearFarRxErrorCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received error counter. It is considered an error if a delay is negative or above 1 sec." ::= { me1200StatusDmOneWayNearFarEntry 5 } me1200StatusDmOneWayNearFarInternalOverflowCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The internal total delay counter overflow counter." ::= { me1200StatusDmOneWayNearFarEntry 6 } me1200StatusDmOneWayNearFarAverageDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total average delay." ::= { me1200StatusDmOneWayNearFarEntry 7 } me1200StatusDmOneWayNearFarAverageLastnDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last N average delay." ::= { me1200StatusDmOneWayNearFarEntry 8 } me1200StatusDmOneWayNearFarAverageDelayVariation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total average delay variation." ::= { me1200StatusDmOneWayNearFarEntry 9 } me1200StatusDmOneWayNearFarAverageLastnDelayVariation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last N average delay variation." ::= { me1200StatusDmOneWayNearFarEntry 10 } me1200StatusDmOneWayNearFarMinimumDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum delay measured." ::= { me1200StatusDmOneWayNearFarEntry 11 } me1200StatusDmOneWayNearFarMaximumDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum delay measured." ::= { me1200StatusDmOneWayNearFarEntry 12 } me1200StatusDmOneWayNearFarMinimumDelayVariation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum delay variation measured." ::= { me1200StatusDmOneWayNearFarEntry 13 } me1200StatusDmOneWayNearFarMaximumDelayVariation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum delay variation measured." ::= { me1200StatusDmOneWayNearFarEntry 14 } me1200StatusDmOneWayNearFarTimeUnit OBJECT-TYPE SYNTAX ME1200Tunit MAX-ACCESS read-only STATUS current DESCRIPTION "Calculation time unit." ::= { me1200StatusDmOneWayNearFarEntry 15 } me1200StatusLoopBack OBJECT IDENTIFIER ::= { me1200MepStatus 4 } me1200StatusLbTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200StatusLbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of Loop Back status" ::= { me1200StatusLoopBack 1 } me1200StatusLbEntry OBJECT-TYPE SYNTAX ME1200StatusLbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a Loop Back status" INDEX { me1200StatusLbId } ::= { me1200StatusLbTable 1 } ME1200StatusLbEntry ::= SEQUENCE { me1200StatusLbId Integer32, me1200StatusLbTransactionId Unsigned32, me1200StatusLbReplyCounter Unsigned32, me1200StatusLbLbmTransmitted Counter64 } me1200StatusLbId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200StatusLbEntry 1 } me1200StatusLbTransactionId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the transaction id that is used to send the next LBM." ::= { me1200StatusLbEntry 2 } me1200StatusLbReplyCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of replying MAC. In case of 'infinite' LBM there is only one reply." ::= { me1200StatusLbEntry 3 } me1200StatusLbLbmTransmitted OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted LBM." ::= { me1200StatusLbEntry 4 } me1200StatusLbReplyTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200StatusLbReplyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of Loop Back reply status" ::= { me1200StatusLoopBack 2 } me1200StatusLbReplyEntry OBJECT-TYPE SYNTAX ME1200StatusLbReplyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a Loop Back reply status" INDEX { me1200StatusLbReplyId, me1200StatusLbReplyReplyId } ::= { me1200StatusLbReplyTable 1 } ME1200StatusLbReplyEntry ::= SEQUENCE { me1200StatusLbReplyId Integer32, me1200StatusLbReplyReplyId Integer32, me1200StatusLbReplyMac MacAddress, me1200StatusLbReplyLbrReceived Counter64, me1200StatusLbReplyOutOfOrder Counter64 } me1200StatusLbReplyId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200StatusLbReplyEntry 1 } me1200StatusLbReplyReplyId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The LB or LT Reply id" ::= { me1200StatusLbReplyEntry 2 } me1200StatusLbReplyMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "LBR source MAC - this is only relevant if not 'infinite' LBM." ::= { me1200StatusLbReplyEntry 3 } me1200StatusLbReplyLbrReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number LBR received from MAC." ::= { me1200StatusLbReplyEntry 4 } me1200StatusLbReplyOutOfOrder OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The OOO counter." ::= { me1200StatusLbReplyEntry 5 } me1200StatusTestSignal OBJECT IDENTIFIER ::= { me1200MepStatus 5 } me1200StatusTstTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200StatusTstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of Test Signal status" ::= { me1200StatusTestSignal 1 } me1200StatusTstEntry OBJECT-TYPE SYNTAX ME1200StatusTstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a Test Signal status" INDEX { me1200StatusTstId } ::= { me1200StatusTstTable 1 } ME1200StatusTstEntry ::= SEQUENCE { me1200StatusTstId Integer32, me1200StatusTstTxCounter Counter64, me1200StatusTstRxCounter Counter64, me1200StatusTstOutOfOrderCounter Counter64, me1200StatusTstRxRate Unsigned32, me1200StatusTstTestTime Unsigned32 } me1200StatusTstId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200StatusTstEntry 1 } me1200StatusTstTxCounter OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmitted TST frames counter." ::= { me1200StatusTstEntry 2 } me1200StatusTstRxCounter OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "REceived TST frames counter." ::= { me1200StatusTstEntry 3 } me1200StatusTstOutOfOrderCounter OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Out of Order counter." ::= { me1200StatusTstEntry 4 } me1200StatusTstRxRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive bit rate in Kbit/s." ::= { me1200StatusTstEntry 5 } me1200StatusTstTestTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Test time in seconds. The elapsed time since last clear." ::= { me1200StatusTstEntry 6 } me1200StatusLinkTrace OBJECT IDENTIFIER ::= { me1200MepStatus 6 } me1200StatusLtTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200StatusLtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of Link Trace status" ::= { me1200StatusLinkTrace 1 } me1200StatusLtEntry OBJECT-TYPE SYNTAX ME1200StatusLtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a Link Trace status" INDEX { me1200StatusLtId } ::= { me1200StatusLtTable 1 } ME1200StatusLtEntry ::= SEQUENCE { me1200StatusLtId Integer32, me1200StatusLtTransactionId Unsigned32, me1200StatusLtReplyCount Unsigned32 } me1200StatusLtId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200StatusLtEntry 1 } me1200StatusLtTransactionId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The transaction id of the latest Link Trace." ::= { me1200StatusLtEntry 2 } me1200StatusLtReplyCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of replies for this Link Trace transaction." ::= { me1200StatusLtEntry 3 } me1200StatusLtReplyTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200StatusLtReplyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of Link Trace reply status" ::= { me1200StatusLinkTrace 2 } me1200StatusLtReplyEntry OBJECT-TYPE SYNTAX ME1200StatusLtReplyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a Link Trace reply status" INDEX { me1200StatusLtReplyId, me1200StatusLtReplyReplyId } ::= { me1200StatusLtReplyTable 1 } ME1200StatusLtReplyEntry ::= SEQUENCE { me1200StatusLtReplyId Integer32, me1200StatusLtReplyReplyId Integer32, me1200StatusLtReplyMode ME1200InstanceMode, me1200StatusLtReplyDirection ME1200InstanceDirection, me1200StatusLtReplyTtl ME1200Unsigned8, me1200StatusLtReplyForwarded TruthValue, me1200StatusLtReplyRelayAction ME1200RelayAction, me1200StatusLtReplyLastEgressMac MacAddress, me1200StatusLtReplyNextEgressMac MacAddress } me1200StatusLtReplyId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200StatusLtReplyEntry 1 } me1200StatusLtReplyReplyId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The LB or LT Reply id" ::= { me1200StatusLtReplyEntry 2 } me1200StatusLtReplyMode OBJECT-TYPE SYNTAX ME1200InstanceMode MAX-ACCESS read-only STATUS current DESCRIPTION "The reply is done by a MEP or a MIP." ::= { me1200StatusLtReplyEntry 3 } me1200StatusLtReplyDirection OBJECT-TYPE SYNTAX ME1200InstanceDirection MAX-ACCESS read-only STATUS current DESCRIPTION "The reply is done by a UP or a Down instance." ::= { me1200StatusLtReplyEntry 4 } me1200StatusLtReplyTtl OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-only STATUS current DESCRIPTION "The reply TTL value." ::= { me1200StatusLtReplyEntry 5 } me1200StatusLtReplyForwarded OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The LTM was forwarded." ::= { me1200StatusLtReplyEntry 6 } me1200StatusLtReplyRelayAction OBJECT-TYPE SYNTAX ME1200RelayAction MAX-ACCESS read-only STATUS current DESCRIPTION "The relay action." ::= { me1200StatusLtReplyEntry 7 } me1200StatusLtReplyLastEgressMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Last Egress MAC for this reply." ::= { me1200StatusLtReplyEntry 8 } me1200StatusLtReplyNextEgressMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Next Egress MAC of this reply." ::= { me1200StatusLtReplyEntry 9 } me1200StatusContinuityCheck OBJECT IDENTIFIER ::= { me1200MepStatus 7 } me1200StatusCCPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200StatusCCPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of peer MEP CC status" ::= { me1200StatusContinuityCheck 2 } me1200StatusCCPeerEntry OBJECT-TYPE SYNTAX ME1200StatusCCPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a peer MEP CC status" INDEX { me1200StatusCCPeerId, me1200StatusCCPeerPeerId } ::= { me1200StatusCCPeerTable 1 } ME1200StatusCCPeerEntry ::= SEQUENCE { me1200StatusCCPeerId Integer32, me1200StatusCCPeerPeerId Integer32, me1200StatusCCPeerOsTlvOuiFirst ME1200Unsigned8, me1200StatusCCPeerOsTlvOuiSecond ME1200Unsigned8, me1200StatusCCPeerOsTlvOuiThird ME1200Unsigned8, me1200StatusCCPeerOsTlvSubType ME1200Unsigned8, me1200StatusCCPeerOsTlvValue ME1200Unsigned8, me1200StatusCCPeerIsTlvValue ME1200Unsigned8, me1200StatusCCPeerPsTlvValue ME1200Unsigned8, me1200StatusCCPeerOsTlvReceived TruthValue, me1200StatusCCPeerIsTlvReceived TruthValue, me1200StatusCCPeerPsTlvReceived TruthValue } me1200StatusCCPeerId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200StatusCCPeerEntry 1 } me1200StatusCCPeerPeerId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Peer MEP ID" ::= { me1200StatusCCPeerEntry 2 } me1200StatusCCPeerOsTlvOuiFirst OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-only STATUS current DESCRIPTION "Last received OS TLV - The OUI content first nibble" ::= { me1200StatusCCPeerEntry 3 } me1200StatusCCPeerOsTlvOuiSecond OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-only STATUS current DESCRIPTION "Last received OS TLV - The OUI content second nibble" ::= { me1200StatusCCPeerEntry 4 } me1200StatusCCPeerOsTlvOuiThird OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-only STATUS current DESCRIPTION "Last received OS TLV - The OUI content third nibble" ::= { me1200StatusCCPeerEntry 5 } me1200StatusCCPeerOsTlvSubType OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-only STATUS current DESCRIPTION "Last received OS TLV - The Sub-Type content" ::= { me1200StatusCCPeerEntry 6 } me1200StatusCCPeerOsTlvValue OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-only STATUS current DESCRIPTION "Last received OS TLV - The Value content" ::= { me1200StatusCCPeerEntry 7 } me1200StatusCCPeerIsTlvValue OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-only STATUS current DESCRIPTION "Last received IS TLV - The Value content" ::= { me1200StatusCCPeerEntry 8 } me1200StatusCCPeerPsTlvValue OBJECT-TYPE SYNTAX ME1200Unsigned8 MAX-ACCESS read-only STATUS current DESCRIPTION "Last received PS TLV - The Value content" ::= { me1200StatusCCPeerEntry 9 } me1200StatusCCPeerOsTlvReceived OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Last received CCM PDU contained OS TLV" ::= { me1200StatusCCPeerEntry 10 } me1200StatusCCPeerIsTlvReceived OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Last received CCM PDU contained IS TLV" ::= { me1200StatusCCPeerEntry 11 } me1200StatusCCPeerPsTlvReceived OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Last received CCM PDU contained PS TLV" ::= { me1200StatusCCPeerEntry 12 } me1200MepControl OBJECT IDENTIFIER ::= { me1200MepMibObjects 4 } me1200ControlLossMeasurement OBJECT IDENTIFIER ::= { me1200MepControl 1 } me1200ControlLmTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200ControlLmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of created instance Loss Measurement control parameters" ::= { me1200ControlLossMeasurement 1 } me1200ControlLmEntry OBJECT-TYPE SYNTAX ME1200ControlLmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a created instance Loss Measurement control parameters" INDEX { me1200ControlLmId } ::= { me1200ControlLmTable 1 } ME1200ControlLmEntry ::= SEQUENCE { me1200ControlLmId Integer32, me1200ControlLmClear TruthValue } me1200ControlLmId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ControlLmEntry 1 } me1200ControlLmClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the LM results" ::= { me1200ControlLmEntry 2 } me1200ControlDelayMeasurement OBJECT IDENTIFIER ::= { me1200MepControl 2 } me1200ControlDmTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200ControlDmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of created instance Delay Measurement control parameters" ::= { me1200ControlDelayMeasurement 1 } me1200ControlDmEntry OBJECT-TYPE SYNTAX ME1200ControlDmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a created instance Delay Measurement control parameters" INDEX { me1200ControlDmId } ::= { me1200ControlDmTable 1 } ME1200ControlDmEntry ::= SEQUENCE { me1200ControlDmId Integer32, me1200ControlDmClear TruthValue } me1200ControlDmId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ControlDmEntry 1 } me1200ControlDmClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the DM results" ::= { me1200ControlDmEntry 2 } me1200ControlTestSignal OBJECT IDENTIFIER ::= { me1200MepControl 3 } me1200ControlTstTable OBJECT-TYPE SYNTAX SEQUENCE OF ME1200ControlTstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of created instance Test Signal control parameters" ::= { me1200ControlTestSignal 1 } me1200ControlTstEntry OBJECT-TYPE SYNTAX ME1200ControlTstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a created instance Test Signal control parameters" INDEX { me1200ControlTstId } ::= { me1200ControlTstTable 1 } ME1200ControlTstEntry ::= SEQUENCE { me1200ControlTstId Integer32, me1200ControlTstClear TruthValue } me1200ControlTstId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP instance ID" ::= { me1200ControlTstEntry 1 } me1200ControlTstClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the TST results" ::= { me1200ControlTstEntry 2 } me1200MepMibConformance OBJECT IDENTIFIER ::= { me1200MepMib 3 } me1200MepMibCompliances OBJECT IDENTIFIER ::= { me1200MepMibConformance 1 } me1200MepMibGroups OBJECT IDENTIFIER ::= { me1200MepMibConformance 2 } me1200MepCapabilitiesInfoGroup OBJECT-GROUP OBJECTS { me1200MepCapabilitiesInstanceMax, me1200MepCapabilitiesPeerMax, me1200MepCapabilitiesTransactionMax, me1200MepCapabilitiesReplyMax, me1200MepCapabilitiesClientFlowsMax, me1200MepCapabilitiesMacMength, me1200MepCapabilitiesMegCodeLength, me1200MepCapabilitiesDmIntervalMin, me1200MepCapabilitiesDmIntervalMax, me1200MepCapabilitiesDmLastnMin, me1200MepCapabilitiesDmLastnMax, me1200MepCapabilitiesLbmSizeMax, me1200MepCapabilitiesLbmSizeMin, me1200MepCapabilitiesTstSizeMax, me1200MepCapabilitiesTstSizeMin, me1200MepCapabilitiesTstRateMax, me1200MepCapabilitiesClientPrioHighest } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 1 } me1200ConfigInstanceTableInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigInstanceMode, me1200ConfigInstanceDirection, me1200ConfigInstanceDomain, me1200ConfigInstanceFlow, me1200ConfigInstancePort, me1200ConfigInstanceLevel, me1200ConfigInstanceVid, me1200ConfigInstanceVoe, me1200ConfigInstanceMac, me1200ConfigInstanceFormat, me1200ConfigInstanceName, me1200ConfigInstanceMeg, me1200ConfigInstanceMep, me1200ConfigInstanceAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 2 } me1200ConfigInstanceRowEditorInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigInstanceRowEditorId, me1200ConfigInstanceRowEditorMode, me1200ConfigInstanceRowEditorDirection, me1200ConfigInstanceRowEditorDomain, me1200ConfigInstanceRowEditorFlow, me1200ConfigInstanceRowEditorPort, me1200ConfigInstanceRowEditorLevel, me1200ConfigInstanceRowEditorVid, me1200ConfigInstanceRowEditorVoe, me1200ConfigInstanceRowEditorMac, me1200ConfigInstanceRowEditorFormat, me1200ConfigInstanceRowEditorName, me1200ConfigInstanceRowEditorMeg, me1200ConfigInstanceRowEditorMep, me1200ConfigInstanceRowEditorAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 3 } me1200ConfigInstancePeerTableInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigInstancePeerMac, me1200ConfigInstancePeerAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 4 } me1200ConfigInstancePeerRowEditorInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigInstancePeerRowEditorId, me1200ConfigInstancePeerRowEditorPeerId, me1200ConfigInstancePeerRowEditorMac, me1200ConfigInstancePeerRowEditorAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 5 } me1200ConfigPmTableInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigPmEnable } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 6 } me1200ConfigCcTableInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigCcDei, me1200ConfigCcPrio, me1200ConfigCcRate, me1200ConfigCcTlv, me1200ConfigCcAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 7 } me1200ConfigCcRowEditorInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigCcRowEditorId, me1200ConfigCcRowEditorDei, me1200ConfigCcRowEditorPrio, me1200ConfigCcRowEditorRate, me1200ConfigCcRowEditorTlv, me1200ConfigCcRowEditorAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 8 } me1200ConfigLmTableInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigLmEnded, me1200ConfigLmDei, me1200ConfigLmPrio, me1200ConfigLmRate, me1200ConfigLmCast, me1200ConfigLmFlrInterval, me1200ConfigLmAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 9 } me1200ConfigLmRowEditorInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigLmRowEditorId, me1200ConfigLmRowEditorEnded, me1200ConfigLmRowEditorDei, me1200ConfigLmRowEditorPrio, me1200ConfigLmRowEditorRate, me1200ConfigLmRowEditorCast, me1200ConfigLmRowEditorFlrInterval, me1200ConfigLmRowEditorAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 10 } me1200ConfigDmTableInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigDmEnded, me1200ConfigDmDei, me1200ConfigDmPrio, me1200ConfigDmCast, me1200ConfigDmMep, me1200ConfigDmCalcWay, me1200ConfigDmInterval, me1200ConfigDmLastN, me1200ConfigDmTimeUnit, me1200ConfigDmOverflowAct, me1200ConfigDmSynchronized, me1200ConfigDmAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 11 } me1200ConfigDmRowEditorInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigDmRowEditorId, me1200ConfigDmRowEditorEnded, me1200ConfigDmRowEditorDei, me1200ConfigDmRowEditorPrio, me1200ConfigDmRowEditorCast, me1200ConfigDmRowEditorMep, me1200ConfigDmRowEditorCalcWay, me1200ConfigDmRowEditorInterval, me1200ConfigDmRowEditorLastN, me1200ConfigDmRowEditorTimeUnit, me1200ConfigDmRowEditorOverflowAct, me1200ConfigDmRowEditorSynchronized, me1200ConfigDmRowEditorAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 12 } me1200ConfigLbTableInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigLbDei, me1200ConfigLbPrio, me1200ConfigLbCast, me1200ConfigLbMep, me1200ConfigLbMac, me1200ConfigLbToSend, me1200ConfigLbSize, me1200ConfigLbInterval, me1200ConfigLbAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 13 } me1200ConfigLbRowEditorInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigLbRowEditorId, me1200ConfigLbRowEditorDei, me1200ConfigLbRowEditorPrio, me1200ConfigLbRowEditorCast, me1200ConfigLbRowEditorMep, me1200ConfigLbRowEditorMac, me1200ConfigLbRowEditorToSend, me1200ConfigLbRowEditorSize, me1200ConfigLbRowEditorInterval, me1200ConfigLbRowEditorAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 14 } me1200ConfigTstTableInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigTstTxEnable, me1200ConfigTstRxEnable, me1200ConfigTstDei, me1200ConfigTstPrio, me1200ConfigTstMep, me1200ConfigTstRate, me1200ConfigTstSize, me1200ConfigTstPattern, me1200ConfigTstSequence, me1200ConfigTstAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 15 } me1200ConfigTstRowEditorInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigTstRowEditorId, me1200ConfigTstRowEditorTxEnable, me1200ConfigTstRowEditorRxEnable, me1200ConfigTstRowEditorDei, me1200ConfigTstRowEditorPrio, me1200ConfigTstRowEditorMep, me1200ConfigTstRowEditorRate, me1200ConfigTstRowEditorSize, me1200ConfigTstRowEditorPattern, me1200ConfigTstRowEditorSequence, me1200ConfigTstRowEditorAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 16 } me1200ConfigLtTableInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigLtDei, me1200ConfigLtPrio, me1200ConfigLtMep, me1200ConfigLtMac, me1200ConfigLtTimeToLive, me1200ConfigLtAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 17 } me1200ConfigLtRowEditorInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigLtRowEditorId, me1200ConfigLtRowEditorDei, me1200ConfigLtRowEditorPrio, me1200ConfigLtRowEditorMep, me1200ConfigLtRowEditorMac, me1200ConfigLtRowEditorTimeToLive, me1200ConfigLtRowEditorAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 18 } me1200ConfigApsTableInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigApsDei, me1200ConfigApsPrio, me1200ConfigApsApsType, me1200ConfigApsCast, me1200ConfigApsRapsOctet, me1200ConfigApsAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 19 } me1200ConfigApsRowEditorInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigApsRowEditorId, me1200ConfigApsRowEditorDei, me1200ConfigApsRowEditorPrio, me1200ConfigApsRowEditorApsType, me1200ConfigApsRowEditorCast, me1200ConfigApsRowEditorRapsOctet, me1200ConfigApsRowEditorAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 20 } me1200ConfigAisTableInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigAisProtection, me1200ConfigAisRate, me1200ConfigAisAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 21 } me1200ConfigAisRowEditorInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigAisRowEditorId, me1200ConfigAisRowEditorProtection, me1200ConfigAisRowEditorRate, me1200ConfigAisRowEditorAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 22 } me1200ConfigLckTableInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigLckRate, me1200ConfigLckAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 23 } me1200ConfigLckRowEditorInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigLckRowEditorId, me1200ConfigLckRowEditorRate, me1200ConfigLckRowEditorAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 24 } me1200ConfigClientTableInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigClientDomain } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 25 } me1200ConfigClientFlowTableInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigClientFlowAisPrio, me1200ConfigClientFlowLckPrio, me1200ConfigClientFlowLevel, me1200ConfigClientFlowAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 26 } me1200ConfigClientFlowRowEditorInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigClientFlowRowEditorId, me1200ConfigClientFlowRowEditorFlowId, me1200ConfigClientFlowRowEditorAisPrio, me1200ConfigClientFlowRowEditorLckPrio, me1200ConfigClientFlowRowEditorLevel, me1200ConfigClientFlowRowEditorAction } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 27 } me1200ConfigSyslogTableInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigSyslogEnable } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 28 } me1200ConfigTlvLeafInfoGroup OBJECT-GROUP OBJECTS { me1200ConfigTlvLeafOsTlvOuiFirst, me1200ConfigTlvLeafOsTlvOuiSecond, me1200ConfigTlvLeafOsTlvOuiThird, me1200ConfigTlvLeafOsTlvSubType, me1200ConfigTlvLeafOsTlvValue } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 29 } me1200StatusInstanceTableInfoGroup OBJECT-GROUP OBJECTS { me1200StatusInstanceClevel, me1200StatusInstanceCmeg, me1200StatusInstanceCmep, me1200StatusInstanceCssf, me1200StatusInstanceCais, me1200StatusInstanceClck, me1200StatusInstanceAtsf, me1200StatusInstanceAtsd, me1200StatusInstanceAblk, me1200StatusInstanceCloop, me1200StatusInstanceCconfig } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 30 } me1200StatusInstancePeerTableInfoGroup OBJECT-GROUP OBJECTS { me1200StatusInstancePeerCloc, me1200StatusInstancePeerCrdi, me1200StatusInstancePeerCperiod, me1200StatusInstancePeerCprio } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 31 } me1200StatusLmTableInfoGroup OBJECT-GROUP OBJECTS { me1200StatusLmTxCounter, me1200StatusLmRxCounter, me1200StatusLmNearEndLosCounter, me1200StatusLmFarEndLosCounter, me1200StatusLmNearEndLosRatio, me1200StatusLmFarEndLosRatio } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 32 } me1200StatusDmTwoWayTableInfoGroup OBJECT-GROUP OBJECTS { me1200StatusDmTwoWayTxCounter, me1200StatusDmTwoWayRxCounter, me1200StatusDmTwoWayRxTimeOutCounter, me1200StatusDmTwoWayRxErrorCounter, me1200StatusDmTwoWayInternalOverflowCounter, me1200StatusDmTwoWayAverageDelay, me1200StatusDmTwoWayAverageLastnDelay, me1200StatusDmTwoWayAverageDelayVariation, me1200StatusDmTwoWayAverageLastnDelayVariation, me1200StatusDmTwoWayMinimumDelay, me1200StatusDmTwoWayMaximumDelay, me1200StatusDmTwoWayMinimumDelayVariation, me1200StatusDmTwoWayMaximumDelayVariation, me1200StatusDmTwoWayTimeUnit } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 33 } me1200StatusDmOneWayFarNearTableInfoGroup OBJECT-GROUP OBJECTS { me1200StatusDmOneWayFarNearTxCounter, me1200StatusDmOneWayFarNearRxCounter, me1200StatusDmOneWayFarNearRxTimeOutCounter, me1200StatusDmOneWayFarNearRxErrorCounter, me1200StatusDmOneWayFarNearInternalOverflowCounter, me1200StatusDmOneWayFarNearAverageDelay, me1200StatusDmOneWayFarNearAverageLastnDelay, me1200StatusDmOneWayFarNearAverageDelayVariation, me1200StatusDmOneWayFarNearAverageLastnDelayVariation, me1200StatusDmOneWayFarNearMinimumDelay, me1200StatusDmOneWayFarNearMaximumDelay, me1200StatusDmOneWayFarNearMinimumDelayVariation, me1200StatusDmOneWayFarNearMaximumDelayVariation, me1200StatusDmOneWayFarNearTimeUnit } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 34 } me1200StatusDmOneWayNearFarTableInfoGroup OBJECT-GROUP OBJECTS { me1200StatusDmOneWayNearFarTxCounter, me1200StatusDmOneWayNearFarRxCounter, me1200StatusDmOneWayNearFarRxTimeOutCounter, me1200StatusDmOneWayNearFarRxErrorCounter, me1200StatusDmOneWayNearFarInternalOverflowCounter, me1200StatusDmOneWayNearFarAverageDelay, me1200StatusDmOneWayNearFarAverageLastnDelay, me1200StatusDmOneWayNearFarAverageDelayVariation, me1200StatusDmOneWayNearFarAverageLastnDelayVariation, me1200StatusDmOneWayNearFarMinimumDelay, me1200StatusDmOneWayNearFarMaximumDelay, me1200StatusDmOneWayNearFarMinimumDelayVariation, me1200StatusDmOneWayNearFarMaximumDelayVariation, me1200StatusDmOneWayNearFarTimeUnit } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 35 } me1200StatusLbTableInfoGroup OBJECT-GROUP OBJECTS { me1200StatusLbTransactionId, me1200StatusLbReplyCounter, me1200StatusLbLbmTransmitted } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 36 } me1200StatusLbReplyTableInfoGroup OBJECT-GROUP OBJECTS { me1200StatusLbReplyMac, me1200StatusLbReplyLbrReceived, me1200StatusLbReplyOutOfOrder } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 37 } me1200StatusTstTableInfoGroup OBJECT-GROUP OBJECTS { me1200StatusTstTxCounter, me1200StatusTstRxCounter, me1200StatusTstOutOfOrderCounter, me1200StatusTstRxRate, me1200StatusTstTestTime } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 38 } me1200StatusLtTableInfoGroup OBJECT-GROUP OBJECTS { me1200StatusLtTransactionId, me1200StatusLtReplyCount } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 39 } me1200StatusLtReplyTableInfoGroup OBJECT-GROUP OBJECTS { me1200StatusLtReplyMode, me1200StatusLtReplyDirection, me1200StatusLtReplyTtl, me1200StatusLtReplyForwarded, me1200StatusLtReplyRelayAction, me1200StatusLtReplyLastEgressMac, me1200StatusLtReplyNextEgressMac } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 40 } me1200StatusCCPeerTableInfoGroup OBJECT-GROUP OBJECTS { me1200StatusCCPeerOsTlvOuiFirst, me1200StatusCCPeerOsTlvOuiSecond, me1200StatusCCPeerOsTlvOuiThird, me1200StatusCCPeerOsTlvSubType, me1200StatusCCPeerOsTlvValue, me1200StatusCCPeerIsTlvValue, me1200StatusCCPeerPsTlvValue, me1200StatusCCPeerOsTlvReceived, me1200StatusCCPeerIsTlvReceived, me1200StatusCCPeerPsTlvReceived } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 41 } me1200ControlLmTableInfoGroup OBJECT-GROUP OBJECTS { me1200ControlLmClear } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 42 } me1200ControlDmTableInfoGroup OBJECT-GROUP OBJECTS { me1200ControlDmClear } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 43 } me1200ControlTstTableInfoGroup OBJECT-GROUP OBJECTS { me1200ControlTstClear } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200MepMibGroups 44 } me1200MepMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the implementation." MODULE -- this module MANDATORY-GROUPS { me1200MepCapabilitiesInfoGroup, me1200ConfigInstanceTableInfoGroup, me1200ConfigInstanceRowEditorInfoGroup, me1200ConfigInstancePeerTableInfoGroup, me1200ConfigInstancePeerRowEditorInfoGroup, me1200ConfigPmTableInfoGroup, me1200ConfigCcTableInfoGroup, me1200ConfigCcRowEditorInfoGroup, me1200ConfigLmTableInfoGroup, me1200ConfigLmRowEditorInfoGroup, me1200ConfigDmTableInfoGroup, me1200ConfigDmRowEditorInfoGroup, me1200ConfigLbTableInfoGroup, me1200ConfigLbRowEditorInfoGroup, me1200ConfigTstTableInfoGroup, me1200ConfigTstRowEditorInfoGroup, me1200ConfigLtTableInfoGroup, me1200ConfigLtRowEditorInfoGroup, me1200ConfigApsTableInfoGroup, me1200ConfigApsRowEditorInfoGroup, me1200ConfigAisTableInfoGroup, me1200ConfigAisRowEditorInfoGroup, me1200ConfigLckTableInfoGroup, me1200ConfigLckRowEditorInfoGroup, me1200ConfigClientTableInfoGroup, me1200ConfigClientFlowTableInfoGroup, me1200ConfigClientFlowRowEditorInfoGroup, me1200ConfigSyslogTableInfoGroup, me1200ConfigTlvLeafInfoGroup, me1200StatusInstanceTableInfoGroup, me1200StatusInstancePeerTableInfoGroup, me1200StatusLmTableInfoGroup, me1200StatusDmTwoWayTableInfoGroup, me1200StatusDmOneWayFarNearTableInfoGroup, me1200StatusDmOneWayNearFarTableInfoGroup, me1200StatusLbTableInfoGroup, me1200StatusLbReplyTableInfoGroup, me1200StatusTstTableInfoGroup, me1200StatusLtTableInfoGroup, me1200StatusLtReplyTableInfoGroup, me1200StatusCCPeerTableInfoGroup, me1200ControlLmTableInfoGroup, me1200ControlDmTableInfoGroup, me1200ControlTstTableInfoGroup } ::= { me1200MepMibCompliances 1 } END