-- *****************************************************************
-- SYSUTIL-MIB:  ME1200 Private MIB
--
--
-- ****************************************************************

ME1200-SYSUTIL-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    me1200SwitchMgmt
        FROM CISCOME1200-MIB
    TruthValue FROM SNMPv2-TC
    Unsigned32 FROM SNMPv2-SMI
    Integer32 FROM SNMPv2-SMI
    ME1200DisplayString FROM ME1200-TC
    ;

me1200SysutilMib MODULE-IDENTITY
    LAST-UPDATED "201404280000Z"
    ORGANIZATION
        "Cisco Systems, Inc"
    CONTACT-INFO
        "Cisco Systems, Inc
        Customer Service
        Postal: 170 W Tasman Drive
        San Jose, CA 95134
        USA
        Tel: +1 800 553-NETS
        E-mail: cs-me1200@cisco.com"
    DESCRIPTION
        "This is a private version of SysUtil"
    REVISION    "201404280000Z"
    DESCRIPTION
        "add PSU"
    REVISION    "201401220000Z"
    DESCRIPTION
        "Initial version"
    ::= { me1200SwitchMgmt 24 }


ME1200SysutilPowerSupplyStateType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "This enumeration defines the type of power supply state."
    SYNTAX      INTEGER { active(0), standby(1), notPresent(2) }

ME1200SysutilRebootType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "This enumeration defines the type of reboot."
    SYNTAX      INTEGER { noReboot(0), coldReboot(1), warmReboot(2) }

me1200SysutilMibObjects OBJECT IDENTIFIER
    ::= { me1200SysutilMib 1 }

me1200SysutilCapabilities OBJECT IDENTIFIER
    ::= { me1200SysutilMibObjects 1 }

me1200SysutilCapabilitiesWarmRebootSupported OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Indicate if warm restart is supported or not. true(1) means it is
         supported. false(2) means it is not supported."
    ::= { me1200SysutilCapabilities 1 }

me1200SysutilStatus OBJECT IDENTIFIER
    ::= { me1200SysutilMibObjects 3 }

me1200SysutilStatusCpuLoad OBJECT IDENTIFIER
    ::= { me1200SysutilStatus 1 }

me1200SysutilStatusCpuLoadAverage100msec OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Average CPU load (%) in 100 milli-seconds."
    ::= { me1200SysutilStatusCpuLoad 1 }

me1200SysutilStatusCpuLoadAverage1sec OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Average CPU load (%) in 1 second."
    ::= { me1200SysutilStatusCpuLoad 2 }

me1200SysutilStatusCpuLoadAverage10sec OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Average CPU load (%) in 10 seconds."
    ::= { me1200SysutilStatusCpuLoad 3 }

me1200SysutilStatusPowerSupplyTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200SysutilStatusPowerSupplyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Table of power supply status."
    ::= { me1200SysutilStatus 2 }

me1200SysutilStatusPowerSupplyEntry OBJECT-TYPE
    SYNTAX      ME1200SysutilStatusPowerSupplyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each row contains the power supply status."
    INDEX       { me1200SysutilStatusPowerSupplySwitchId, me1200SysutilStatusPowerSupplyPsuId }
    ::= { me1200SysutilStatusPowerSupplyTable 1 }

ME1200SysutilStatusPowerSupplyEntry ::= SEQUENCE {
    me1200SysutilStatusPowerSupplySwitchId    Integer32,
    me1200SysutilStatusPowerSupplyPsuId   Integer32,
    me1200SysutilStatusPowerSupplyState   ME1200SysutilPowerSupplyStateType,
    me1200SysutilStatusPowerSupplyDescription     ME1200DisplayString
}

me1200SysutilStatusPowerSupplySwitchId OBJECT-TYPE
    SYNTAX      Integer32 (1..16)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The identification of switch."
    ::= { me1200SysutilStatusPowerSupplyEntry 1 }

me1200SysutilStatusPowerSupplyPsuId OBJECT-TYPE
    SYNTAX      Integer32 (1..2)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The identification of power supply."
    ::= { me1200SysutilStatusPowerSupplyEntry 2 }

me1200SysutilStatusPowerSupplyState OBJECT-TYPE
    SYNTAX      ME1200SysutilPowerSupplyStateType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The state of power supply."
    ::= { me1200SysutilStatusPowerSupplyEntry 3 }

me1200SysutilStatusPowerSupplyDescription OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..30))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The description of power supply."
    ::= { me1200SysutilStatusPowerSupplyEntry 4 }

me1200SysutilControl OBJECT IDENTIFIER
    ::= { me1200SysutilMibObjects 4 }

me1200SysutilControlRebootTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200SysutilControlRebootEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table to reboot a swicth"
    ::= { me1200SysutilControl 1 }

me1200SysutilControlRebootEntry OBJECT-TYPE
    SYNTAX      ME1200SysutilControlRebootEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each switch has a set of parameters"
    INDEX       { me1200SysutilControlRebootSwitchId }
    ::= { me1200SysutilControlRebootTable 1 }

ME1200SysutilControlRebootEntry ::= SEQUENCE {
    me1200SysutilControlRebootSwitchId    Integer32,
    me1200SysutilControlRebootType    ME1200SysutilRebootType
}

me1200SysutilControlRebootSwitchId OBJECT-TYPE
    SYNTAX      Integer32 (1..16)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The identification of switch."
    ::= { me1200SysutilControlRebootEntry 1 }

me1200SysutilControlRebootType OBJECT-TYPE
    SYNTAX      ME1200SysutilRebootType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Type of reboot. noReboot(0) does not reboot. coldReboot(1) is to do
         cold reboot. warmReboot(2) is to do warm reboot, but this is optional.
         The OID of vtssSysutilCapabilitiesWarmRebootSupported tells if warm
         reboot is supported or not."
    ::= { me1200SysutilControlRebootEntry 2 }

me1200SysutilMibConformance OBJECT IDENTIFIER
    ::= { me1200SysutilMib 2 }

me1200SysutilMibCompliances OBJECT IDENTIFIER
    ::= { me1200SysutilMibConformance 1 }

me1200SysutilMibGroups OBJECT IDENTIFIER
    ::= { me1200SysutilMibConformance 2 }

me1200SysutilCapabilitiesInfoGroup OBJECT-GROUP
    OBJECTS     { me1200SysutilCapabilitiesWarmRebootSupported }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200SysutilMibGroups 1 }

me1200SysutilStatusCpuLoadInfoGroup OBJECT-GROUP
    OBJECTS     { me1200SysutilStatusCpuLoadAverage100msec, 
                  me1200SysutilStatusCpuLoadAverage1sec, 
                  me1200SysutilStatusCpuLoadAverage10sec }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200SysutilMibGroups 2 }

me1200SysutilStatusPowerSupplyInfoGroup OBJECT-GROUP
    OBJECTS     { me1200SysutilStatusPowerSupplyState, 
                  me1200SysutilStatusPowerSupplyDescription }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200SysutilMibGroups 3 }

me1200SysutilControlRebootInfoGroup OBJECT-GROUP
    OBJECTS     { me1200SysutilControlRebootType }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200SysutilMibGroups 4 }

me1200SysutilMibCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for the implementation."

    MODULE      -- this module

        MANDATORY-GROUPS        { me1200SysutilCapabilitiesInfoGroup, 
                  me1200SysutilStatusCpuLoadInfoGroup, 
                  me1200SysutilStatusPowerSupplyInfoGroup, 
                  me1200SysutilControlRebootInfoGroup }

    ::= { me1200SysutilMibCompliances 1 }

END