-- *********************************************************************
-- CISCO-UNIFIED-COMPUTING-DIAG-MIB.my
-- 
-- MIB representation of the Cisco Unified Computing System
-- DIAG management information model package
-- 
-- Created July 2018 by Charles Bullis
-- 
-- Copyright (c) 2005-2018 Cisco Systems, Inc. All rights reserved.
-- 
-- *********************************************************************

CISCO-UNIFIED-COMPUTING-DIAG-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Counter32,
    Gauge32,
    TimeTicks,
    Counter64,
    Unsigned32
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION,
    RowPointer,
    DateAndTime,
    DisplayString,
    MacAddress,
    TimeInterval,
    TimeStamp,
    TruthValue
        FROM SNMPv2-TC
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
    InetAddressIPv4,
    InetAddressIPv6
        FROM INET-ADDRESS-MIB
    ciscoMgmt
        FROM CISCO-SMI
    CiscoNetworkAddress,
    Unsigned64,
    CiscoInetAddressMask,
    CiscoAlarmSeverity,
    TimeIntervalSec
        FROM CISCO-TC
    ciscoUnifiedComputingMIBObjects,
    CucsManagedObjectId,
    CucsManagedObjectDn
        FROM CISCO-UNIFIED-COMPUTING-MIB
    CucsDiagAdminState,
    CucsDiagCpuFilter,
    CucsDiagFailureAction,
    CucsDiagMemChunkSize,
    CucsDiagPattern,
    CucsDiagStatus,
    CucsDiagStatusIssues,
    CucsDiagSuccessAction,
    CucsDiagTestType,
    CucsNetworkSwitchId,
    CucsPolicyPolicyOwner
        FROM CISCO-UNIFIED-COMPUTING-TC-MIB;

cucsDiagObjects MODULE-IDENTITY
    LAST-UPDATED    "201807260000Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
        "Cisco Systems
        Customer Service
        
        Postal: 170 W Tasman Drive
        San Jose, CA  95134
        USA
        
        Tel: +1 800 553 -NETS
        
        E-mail: cs-san@cisco.com, cs-lan-switch-snmp@cisco.com"
    DESCRIPTION
        "MIB representation of the Cisco Unified Computing System
        DIAG management information model package"
    ::= { ciscoUnifiedComputingMIBObjects 12 }

cucsDiagLogEpTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CucsDiagLogEpEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco UCS diag:LogEp managed object table"
    ::= { cucsDiagObjects 7 }

cucsDiagLogEpEntry OBJECT-TYPE
    SYNTAX           CucsDiagLogEpEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cucsDiagLogEpTable table."
    INDEX { cucsDiagLogEpInstanceId }
    ::= { cucsDiagLogEpTable 1 }

CucsDiagLogEpEntry ::= SEQUENCE {
    cucsDiagLogEpInstanceId                                          CucsManagedObjectId,
    cucsDiagLogEpDn                                                  CucsManagedObjectDn,
    cucsDiagLogEpRn                                                  SnmpAdminString,
    cucsDiagLogEpLogDn                                               SnmpAdminString,
    cucsDiagLogEpSwitchId                                            CucsNetworkSwitchId
}

cucsDiagLogEpInstanceId OBJECT-TYPE
    SYNTAX       CucsManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cucsDiagLogEpEntry 1 }

cucsDiagLogEpDn OBJECT-TYPE
    SYNTAX       CucsManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:LogEp:dn managed object property"
    ::= { cucsDiagLogEpEntry 2 }

cucsDiagLogEpRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:LogEp:rn managed object property"
    ::= { cucsDiagLogEpEntry 3 }

cucsDiagLogEpLogDn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:LogEp:logDn managed object property"
    ::= { cucsDiagLogEpEntry 4 }

cucsDiagLogEpSwitchId OBJECT-TYPE
    SYNTAX       CucsNetworkSwitchId
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:LogEp:switchId managed object property"
    ::= { cucsDiagLogEpEntry 5 }

cucsDiagMemoryTestTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CucsDiagMemoryTestEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco UCS diag:MemoryTest managed object table"
    ::= { cucsDiagObjects 8 }

cucsDiagMemoryTestEntry OBJECT-TYPE
    SYNTAX           CucsDiagMemoryTestEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cucsDiagMemoryTestTable table."
    INDEX { cucsDiagMemoryTestInstanceId }
    ::= { cucsDiagMemoryTestTable 1 }

CucsDiagMemoryTestEntry ::= SEQUENCE {
    cucsDiagMemoryTestInstanceId                                     CucsManagedObjectId,
    cucsDiagMemoryTestDn                                             CucsManagedObjectDn,
    cucsDiagMemoryTestRn                                             SnmpAdminString,
    cucsDiagMemoryTestCpuFilter                                      CucsDiagCpuFilter,
    cucsDiagMemoryTestId                                             Gauge32,
    cucsDiagMemoryTestLoopCount                                      Gauge32,
    cucsDiagMemoryTestMemChunkSize                                   CucsDiagMemChunkSize,
    cucsDiagMemoryTestMemSize                                        Gauge32,
    cucsDiagMemoryTestOrder                                          Gauge32,
    cucsDiagMemoryTestPattern                                        CucsDiagPattern,
    cucsDiagMemoryTestType                                           CucsDiagTestType
}

cucsDiagMemoryTestInstanceId OBJECT-TYPE
    SYNTAX       CucsManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cucsDiagMemoryTestEntry 1 }

cucsDiagMemoryTestDn OBJECT-TYPE
    SYNTAX       CucsManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:MemoryTest:dn managed object property"
    ::= { cucsDiagMemoryTestEntry 2 }

cucsDiagMemoryTestRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:MemoryTest:rn managed object property"
    ::= { cucsDiagMemoryTestEntry 3 }

cucsDiagMemoryTestCpuFilter OBJECT-TYPE
    SYNTAX       CucsDiagCpuFilter
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:MemoryTest:cpuFilter managed object property"
    ::= { cucsDiagMemoryTestEntry 4 }

cucsDiagMemoryTestId OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:MemoryTest:id managed object property"
    ::= { cucsDiagMemoryTestEntry 5 }

cucsDiagMemoryTestLoopCount OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:MemoryTest:loopCount managed object property"
    ::= { cucsDiagMemoryTestEntry 6 }

cucsDiagMemoryTestMemChunkSize OBJECT-TYPE
    SYNTAX       CucsDiagMemChunkSize
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:MemoryTest:memChunkSize managed object property"
    ::= { cucsDiagMemoryTestEntry 7 }

cucsDiagMemoryTestMemSize OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:MemoryTest:memSize managed object property"
    ::= { cucsDiagMemoryTestEntry 8 }

cucsDiagMemoryTestOrder OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:MemoryTest:order managed object property"
    ::= { cucsDiagMemoryTestEntry 9 }

cucsDiagMemoryTestPattern OBJECT-TYPE
    SYNTAX       CucsDiagPattern
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:MemoryTest:pattern managed object property"
    ::= { cucsDiagMemoryTestEntry 10 }

cucsDiagMemoryTestType OBJECT-TYPE
    SYNTAX       CucsDiagTestType
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:MemoryTest:type managed object property"
    ::= { cucsDiagMemoryTestEntry 11 }

cucsDiagRsltTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CucsDiagRsltEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco UCS diag:Rslt managed object table"
    ::= { cucsDiagObjects 3 }

cucsDiagRsltEntry OBJECT-TYPE
    SYNTAX           CucsDiagRsltEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cucsDiagRsltTable table."
    INDEX { cucsDiagRsltInstanceId }
    ::= { cucsDiagRsltTable 1 }

CucsDiagRsltEntry ::= SEQUENCE {
    cucsDiagRsltInstanceId                                           CucsManagedObjectId,
    cucsDiagRsltDn                                                   CucsManagedObjectDn,
    cucsDiagRsltRn                                                   SnmpAdminString,
    cucsDiagRsltDescr                                                SnmpAdminString,
    cucsDiagRsltEndTs                                                DateAndTime,
    cucsDiagRsltId                                                   Gauge32,
    cucsDiagRsltResult                                               Gauge32,
    cucsDiagRsltRsltStatus                                           CucsDiagStatus,
    cucsDiagRsltStartTs                                              DateAndTime,
    cucsDiagRsltEstProgWeight                                        Gauge32,
    cucsDiagRsltProgress                                             Gauge32,
    cucsDiagRsltTestDn                                               SnmpAdminString,
    cucsDiagRsltTestType                                             CucsDiagTestType
}

cucsDiagRsltInstanceId OBJECT-TYPE
    SYNTAX       CucsManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cucsDiagRsltEntry 1 }

cucsDiagRsltDn OBJECT-TYPE
    SYNTAX       CucsManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:Rslt:dn managed object property"
    ::= { cucsDiagRsltEntry 2 }

cucsDiagRsltRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:Rslt:rn managed object property"
    ::= { cucsDiagRsltEntry 3 }

cucsDiagRsltDescr OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:Rslt:descr managed object property"
    ::= { cucsDiagRsltEntry 4 }

cucsDiagRsltEndTs OBJECT-TYPE
    SYNTAX       DateAndTime
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:Rslt:endTs managed object property"
    ::= { cucsDiagRsltEntry 5 }

cucsDiagRsltId OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:Rslt:id managed object property"
    ::= { cucsDiagRsltEntry 6 }

cucsDiagRsltResult OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:Rslt:result managed object property"
    ::= { cucsDiagRsltEntry 7 }

cucsDiagRsltRsltStatus OBJECT-TYPE
    SYNTAX       CucsDiagStatus
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:Rslt:rsltStatus managed object property"
    ::= { cucsDiagRsltEntry 8 }

cucsDiagRsltStartTs OBJECT-TYPE
    SYNTAX       DateAndTime
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:Rslt:startTs managed object property"
    ::= { cucsDiagRsltEntry 9 }

cucsDiagRsltEstProgWeight OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:Rslt:estProgWeight managed object property"
    ::= { cucsDiagRsltEntry 10 }

cucsDiagRsltProgress OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:Rslt:progress managed object property"
    ::= { cucsDiagRsltEntry 11 }

cucsDiagRsltTestDn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:Rslt:testDn managed object property"
    ::= { cucsDiagRsltEntry 12 }

cucsDiagRsltTestType OBJECT-TYPE
    SYNTAX       CucsDiagTestType
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:Rslt:testType managed object property"
    ::= { cucsDiagRsltEntry 13 }

cucsDiagRunPolicyTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CucsDiagRunPolicyEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco UCS diag:RunPolicy managed object table"
    ::= { cucsDiagObjects 4 }

cucsDiagRunPolicyEntry OBJECT-TYPE
    SYNTAX           CucsDiagRunPolicyEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cucsDiagRunPolicyTable table."
    INDEX { cucsDiagRunPolicyInstanceId }
    ::= { cucsDiagRunPolicyTable 1 }

CucsDiagRunPolicyEntry ::= SEQUENCE {
    cucsDiagRunPolicyInstanceId                                      CucsManagedObjectId,
    cucsDiagRunPolicyDn                                              CucsManagedObjectDn,
    cucsDiagRunPolicyRn                                              SnmpAdminString,
    cucsDiagRunPolicyDescr                                           SnmpAdminString,
    cucsDiagRunPolicyFailureAction                                   CucsDiagFailureAction,
    cucsDiagRunPolicyIntId                                           SnmpAdminString,
    cucsDiagRunPolicyName                                            SnmpAdminString,
    cucsDiagRunPolicySuccessAction                                   CucsDiagSuccessAction,
    cucsDiagRunPolicyPolicyLevel                                     Gauge32,
    cucsDiagRunPolicyPolicyOwner                                     CucsPolicyPolicyOwner
}

cucsDiagRunPolicyInstanceId OBJECT-TYPE
    SYNTAX       CucsManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cucsDiagRunPolicyEntry 1 }

cucsDiagRunPolicyDn OBJECT-TYPE
    SYNTAX       CucsManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:RunPolicy:dn managed object property"
    ::= { cucsDiagRunPolicyEntry 2 }

cucsDiagRunPolicyRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:RunPolicy:rn managed object property"
    ::= { cucsDiagRunPolicyEntry 3 }

cucsDiagRunPolicyDescr OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:RunPolicy:descr managed object property"
    ::= { cucsDiagRunPolicyEntry 4 }

cucsDiagRunPolicyFailureAction OBJECT-TYPE
    SYNTAX       CucsDiagFailureAction
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:RunPolicy:failureAction managed object property"
    ::= { cucsDiagRunPolicyEntry 5 }

cucsDiagRunPolicyIntId OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:RunPolicy:intId managed object property"
    ::= { cucsDiagRunPolicyEntry 6 }

cucsDiagRunPolicyName OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:RunPolicy:name managed object property"
    ::= { cucsDiagRunPolicyEntry 7 }

cucsDiagRunPolicySuccessAction OBJECT-TYPE
    SYNTAX       CucsDiagSuccessAction
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:RunPolicy:successAction managed object property"
    ::= { cucsDiagRunPolicyEntry 8 }

cucsDiagRunPolicyPolicyLevel OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:RunPolicy:policyLevel managed object property"
    ::= { cucsDiagRunPolicyEntry 9 }

cucsDiagRunPolicyPolicyOwner OBJECT-TYPE
    SYNTAX       CucsPolicyPolicyOwner
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:RunPolicy:policyOwner managed object property"
    ::= { cucsDiagRunPolicyEntry 10 }

cucsDiagSrvCapProviderTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CucsDiagSrvCapProviderEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco UCS diag:SrvCapProvider managed object table"
    ::= { cucsDiagObjects 5 }

cucsDiagSrvCapProviderEntry OBJECT-TYPE
    SYNTAX           CucsDiagSrvCapProviderEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cucsDiagSrvCapProviderTable table."
    INDEX { cucsDiagSrvCapProviderInstanceId }
    ::= { cucsDiagSrvCapProviderTable 1 }

CucsDiagSrvCapProviderEntry ::= SEQUENCE {
    cucsDiagSrvCapProviderInstanceId                                 CucsManagedObjectId,
    cucsDiagSrvCapProviderDn                                         CucsManagedObjectDn,
    cucsDiagSrvCapProviderRn                                         SnmpAdminString,
    cucsDiagSrvCapProviderDeprecated                                 TruthValue,
    cucsDiagSrvCapProviderGencount                                   Gauge32,
    cucsDiagSrvCapProviderMgmtPlaneVer                               SnmpAdminString,
    cucsDiagSrvCapProviderModel                                      SnmpAdminString,
    cucsDiagSrvCapProviderRevision                                   SnmpAdminString,
    cucsDiagSrvCapProviderVendor                                     SnmpAdminString,
    cucsDiagSrvCapProviderPromCardType                               Gauge32,
    cucsDiagSrvCapProviderDeleted                                    TruthValue,
    cucsDiagSrvCapProviderElementLoadFailures                        Gauge32,
    cucsDiagSrvCapProviderElementsLoaded                             Gauge32,
    cucsDiagSrvCapProviderLoadErrors                                 Gauge32,
    cucsDiagSrvCapProviderLoadWarnings                               Gauge32
}

cucsDiagSrvCapProviderInstanceId OBJECT-TYPE
    SYNTAX       CucsManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cucsDiagSrvCapProviderEntry 1 }

cucsDiagSrvCapProviderDn OBJECT-TYPE
    SYNTAX       CucsManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCapProvider:dn managed object property"
    ::= { cucsDiagSrvCapProviderEntry 2 }

cucsDiagSrvCapProviderRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCapProvider:rn managed object property"
    ::= { cucsDiagSrvCapProviderEntry 3 }

cucsDiagSrvCapProviderDeprecated OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCapProvider:deprecated managed object property"
    ::= { cucsDiagSrvCapProviderEntry 4 }

cucsDiagSrvCapProviderGencount OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCapProvider:gencount managed object property"
    ::= { cucsDiagSrvCapProviderEntry 5 }

cucsDiagSrvCapProviderMgmtPlaneVer OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCapProvider:mgmtPlaneVer managed
        object property"
    ::= { cucsDiagSrvCapProviderEntry 6 }

cucsDiagSrvCapProviderModel OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCapProvider:model managed object property"
    ::= { cucsDiagSrvCapProviderEntry 7 }

cucsDiagSrvCapProviderRevision OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCapProvider:revision managed object property"
    ::= { cucsDiagSrvCapProviderEntry 8 }

cucsDiagSrvCapProviderVendor OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCapProvider:vendor managed object property"
    ::= { cucsDiagSrvCapProviderEntry 9 }

cucsDiagSrvCapProviderPromCardType OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCapProvider:promCardType managed
        object property"
    ::= { cucsDiagSrvCapProviderEntry 10 }

cucsDiagSrvCapProviderDeleted OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCapProvider:deleted managed object property"
    ::= { cucsDiagSrvCapProviderEntry 11 }

cucsDiagSrvCapProviderElementLoadFailures OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCapProvider:elementLoadFailures
        managed object property"
    ::= { cucsDiagSrvCapProviderEntry 12 }

cucsDiagSrvCapProviderElementsLoaded OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCapProvider:elementsLoaded managed
        object property"
    ::= { cucsDiagSrvCapProviderEntry 13 }

cucsDiagSrvCapProviderLoadErrors OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCapProvider:loadErrors managed object property"
    ::= { cucsDiagSrvCapProviderEntry 14 }

cucsDiagSrvCapProviderLoadWarnings OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCapProvider:loadWarnings managed
        object property"
    ::= { cucsDiagSrvCapProviderEntry 15 }

cucsDiagSrvCtrlTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CucsDiagSrvCtrlEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco UCS diag:SrvCtrl managed object table"
    ::= { cucsDiagObjects 6 }

cucsDiagSrvCtrlEntry OBJECT-TYPE
    SYNTAX           CucsDiagSrvCtrlEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cucsDiagSrvCtrlTable table."
    INDEX { cucsDiagSrvCtrlInstanceId }
    ::= { cucsDiagSrvCtrlTable 1 }

CucsDiagSrvCtrlEntry ::= SEQUENCE {
    cucsDiagSrvCtrlInstanceId                                        CucsManagedObjectId,
    cucsDiagSrvCtrlDn                                                CucsManagedObjectDn,
    cucsDiagSrvCtrlRn                                                SnmpAdminString,
    cucsDiagSrvCtrlAdminState                                        CucsDiagAdminState,
    cucsDiagSrvCtrlOperQualifier                                     CucsDiagStatusIssues,
    cucsDiagSrvCtrlOperState                                         CucsDiagStatus,
    cucsDiagSrvCtrlRunPolicyName                                     SnmpAdminString,
    cucsDiagSrvCtrlEndTs                                             DateAndTime,
    cucsDiagSrvCtrlEndTsM                                            Unsigned64,
    cucsDiagSrvCtrlErrorDescr                                        SnmpAdminString,
    cucsDiagSrvCtrlStartTs                                           DateAndTime,
    cucsDiagSrvCtrlStartTsM                                          Unsigned64,
    cucsDiagSrvCtrlOverallProgress                                   Gauge32
}

cucsDiagSrvCtrlInstanceId OBJECT-TYPE
    SYNTAX       CucsManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cucsDiagSrvCtrlEntry 1 }

cucsDiagSrvCtrlDn OBJECT-TYPE
    SYNTAX       CucsManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCtrl:dn managed object property"
    ::= { cucsDiagSrvCtrlEntry 2 }

cucsDiagSrvCtrlRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCtrl:rn managed object property"
    ::= { cucsDiagSrvCtrlEntry 3 }

cucsDiagSrvCtrlAdminState OBJECT-TYPE
    SYNTAX       CucsDiagAdminState
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCtrl:adminState managed object property"
    ::= { cucsDiagSrvCtrlEntry 4 }

cucsDiagSrvCtrlOperQualifier OBJECT-TYPE
    SYNTAX       CucsDiagStatusIssues
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCtrl:operQualifier managed object property"
    ::= { cucsDiagSrvCtrlEntry 7 }

cucsDiagSrvCtrlOperState OBJECT-TYPE
    SYNTAX       CucsDiagStatus
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCtrl:operState managed object property"
    ::= { cucsDiagSrvCtrlEntry 8 }

cucsDiagSrvCtrlRunPolicyName OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCtrl:runPolicyName managed object property"
    ::= { cucsDiagSrvCtrlEntry 9 }

cucsDiagSrvCtrlEndTs OBJECT-TYPE
    SYNTAX       DateAndTime
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCtrl:endTs managed object property"
    ::= { cucsDiagSrvCtrlEntry 11 }

cucsDiagSrvCtrlEndTsM OBJECT-TYPE
    SYNTAX       Unsigned64
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCtrl:endTsM managed object property"
    ::= { cucsDiagSrvCtrlEntry 12 }

cucsDiagSrvCtrlErrorDescr OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCtrl:errorDescr managed object property"
    ::= { cucsDiagSrvCtrlEntry 13 }

cucsDiagSrvCtrlStartTs OBJECT-TYPE
    SYNTAX       DateAndTime
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCtrl:startTs managed object property"
    ::= { cucsDiagSrvCtrlEntry 14 }

cucsDiagSrvCtrlStartTsM OBJECT-TYPE
    SYNTAX       Unsigned64
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCtrl:startTsM managed object property"
    ::= { cucsDiagSrvCtrlEntry 15 }

cucsDiagSrvCtrlOverallProgress OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco UCS diag:SrvCtrl:overallProgress managed object property"
    ::= { cucsDiagSrvCtrlEntry 16 }

END