-- MIB file created 03-Dec-2001 17:12:21, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com ADSL-LINE-MIB DEFINITIONS ::= BEGIN -- From file: "ADSL-LINE-MIB.my" -- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T" IMPORTS transmission FROM SNMPv2-SMI-v1 RowStatus, TruthValue, VariablePointer FROM SNMPv2-TC-v1 ifIndex FROM IF-MIB PerfCurrentCount, PerfIntervalCount FROM PerfHist-TC-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB Counter, Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; adslMIB OBJECT IDENTIFIER ::= { transmission 94 } -- MODULE-IDENTITY -- LastUpdated -- 9811161200Z -- OrgName -- IETF ADSL MIB Working Group -- ContactInfo -- -- Gregory Bathrick -- AG Communication Systems -- 2500 W Utopia Rd. -- Phoenix, AZ 85027 USA -- Tel: +1 602-582-7679 -- Fax: +1 602-582-7697 -- E-mail: bathricg@agcs.com -- -- Faye Ly -- Copper Mountain Networks -- Norcal Office -- 2470 Embarcadero Way -- Palo Alto, CA 94303 -- Tel: +1 650-858-8500 -- Fax: +1 650-858-8085 -- E-Mail: faye@norcal.coppermountain.com -- -- John Burgess -- Predictive Systems, Inc. -- 25A Vreeland Rd. -- Florham Park, NJ 07932 USA -- Tel: +1 973-301-5610 -- Fax: +1 973-301-5699 -- E-mail: jtburgess@predictive.com -- -- IETF ADSL MIB Working Group (adsl@xlist.agcs.com) -- Descr -- The MIB module defining objects for the management of a pair of -- ADSL modems at each end of the ADSL line. Each such line has -- an entry in an ifTable which may include multiple modem lines. -- An agent may reside at either end of the ADSL line however the -- MIB is designed to require no management communication between -- them beyond that inherent in the low-level ADSL line protocol. -- The agent may monitor and control this protocol for its needs. -- -- ADSL lines may support optional Fast or Interleaved channels. -- If these are supported, additional entries corresponding to the -- supported channels must be created in the ifTable. Thus an ADSL -- line that supports both channels will have three entries in the -- ifTable, one for each physical, fast, and interleaved, whose -- ifType values are equal to adsl(94), fast(125), and -- interleaved(124), respectively. The ifStackTable is used to -- represent the relationship between the entries. -- -- Naming Conventions: -- Atuc == (ATUC) modem at near (Central) end of line -- Atur == (ATUR) modem at Remote end of line -- Curr == Current -- Prev == Previous -- Atn == Attenuation -- ES == Errored Second. -- LCS == Line Code Specific -- Lof == Loss of Frame -- Lol == Loss of Link -- Los == Loss of Signal -- Lpr == Loss of Power -- xxxs== interval of Seconds in which xxx occurs -- (e.g., xxx=Lof, Los, Lpr) -- Max == Maximum -- Mgn == Margin -- Min == Minimum -- Psd == Power Spectral Density -- Snr == Signal to Noise Ratio -- Tx == Transmit -- Blks== Blocks, a data unit, see -- adslAtuXChanCrcBlockLength -- -- RevDate -- 9808071200Z -- RevDescr -- Changes taken at the March 98 ADSL WG meeting: -- - Added Conformance Statement -- - SNMPv3 conformance -- - RFC-2233 conformance -- -- Comments from Technical Advisors, Wijnen and Tesink: -- - DisplayString -> UTF-8 String -- - minimized # of mandatory performance counts -- - Corrected Syntax of current status objects. -- - Corrected use of SNMP SMI. -- -- Lessons learned through implementation of MIB (ADSLF TR006): -- - clarified definition of channel block size, SNR -- Interleave Delay, Attenuation, and Output power. -- - corrected UNITS and SYNTAX of adsl rate objects, -- Version#, VendorID. -- - added missing line activation objects. -- -- General editorial cleanup. -- -- Added Security Statement (Dave Allan) -- RevDate -- 9808071200Z -- RevDescr -- General editorial cleanup. -- RevDate -- 9810301200Z -- RevDescr -- -- Changes taken at the August 98 ADSL WG meeting: -- - Used PerfCurrentCount and PerfIntervalCount -- when appropriate. -- - Updated Security Statement to conform with -- current format. -- - Changed SYNTAX of Serial #, Vendor ID, and -- Version # to `OCTET STRING'. -- -- Comments taken from Jeff Johnson and other WG -- contributors: -- - Removed references to MIB-2 and RFC-1213. -- - Re-organized the `Use of IF-MIB' section for -- clarification and conformance reasons. -- - Changed definition of profile control objects: -- For the static profiles, they are read-only. -- Updated conformance statements in a likely -- manner. -- - Removed references to ifTestTypes. IF-MIB does -- support at this time. -- - Minor changes to entity mib section. -- - Changed SYNTAX of SNR, Attenuation, Attainable rate, -- and Output power to `Gauge32`. -- - Changed SYNTAX of adslLineSpecific to VariablePointer. -- - Swapped lossOfLink(4) and lossOfSignalQuality(5) of -- Atuc Current Status to line up better with Atur -- Current Status. -- - Removed ifIndex from traps -- - and many additional and useful editorial comments. -- RevDate -- 9811161200Z -- RevDescr -- -- Changes: -- - updated text and conformance statements to include -- CPE equipment view. -- - updated text and objects to change profile tables -- index to SnmpAdminString. -- - changed transmission xx to experimental 89. -- - resolved conflicting statements on when traps occur. -- - added Faye Ly as co-editor and Ted Soo-Hoo and -- Umberto Bonollo as contributors. -- RevDate -- 9812211200Z -- RevDescr -- -- Group Last Call version: -- Changes (as agreed to made at the Orlando meeting). -- - editorial corrections related to past CPE view updates. -- - technical clarifications related to the use of profiles. adslLineMib OBJECT IDENTIFIER ::= { adslMIB 1 } adslMibObjects OBJECT IDENTIFIER ::= { adslLineMib 1 } adslLCSMib OBJECT IDENTIFIER ::= { adslMibObjects 16 } adslTraps OBJECT IDENTIFIER ::= { adslLineMib 2 } adslAtucTraps OBJECT IDENTIFIER ::= { adslTraps 1 } adslAturTraps OBJECT IDENTIFIER ::= { adslTraps 2 } adslConformance OBJECT IDENTIFIER ::= { adslLineMib 3 } adslGroups OBJECT IDENTIFIER ::= { adslConformance 1 } adslCompliances OBJECT IDENTIFIER ::= { adslConformance 2 } AdslLineProfileName ::= SnmpAdminString(SIZE(1..32)) -- Rsyntax OCTET STRING(SIZE(1..32)) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- This data type is used to uniquely identify a row in -- an ADSL Line Profile Table. adslLineTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslLineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table includes common attributes describing both ends of the line. It is required for all ADSL physical interfaces. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94)." ::= { adslMibObjects 1 } adslLineEntry OBJECT-TYPE SYNTAX AdslLineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in adslLineTable." INDEX { ifIndex } ::= { adslLineTable 1 } AdslLineEntry ::= SEQUENCE { adslLineCoding INTEGER, adslLineType INTEGER, adslLineSpecific VariablePointer, adslLineConfProfile AdslLineProfileName, adslLineAlarmConfProfile AdslLineProfileName } adslLineCoding OBJECT-TYPE SYNTAX INTEGER { other(1), dmt(2), cap(3), qam(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the ADSL coding type used on this line. Other types may be added in the future." ::= { adslLineEntry 1 } adslLineType OBJECT-TYPE SYNTAX INTEGER { noChannel(1), fastOnly(2), interleavedOnly(3), fastOrInterleaved(4), fastAndInterleaved(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the type of ADSL physical line entity that exists, by defining whether and how the line is channelized. If the line is channelized, the value will be other than noChannel(1). This object defines which channel type(s) are supported. In the case that the line is channelized, the manager can use the ifStackTable to determine the ifIndex for the associated channel(s)." ::= { adslLineEntry 2 } adslLineSpecific OBJECT-TYPE SYNTAX VariablePointer -- Rsyntax OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "OID instance in vendor-specific MIB. The Instance may be used to determine shelf/slot/port of the ATUC interface in a DSLAM." ::= { adslLineEntry 3 } adslLineConfProfile OBJECT-TYPE SYNTAX AdslLineProfileName -- Rsyntax OCTET STRING(SIZE(1..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object identifies the row in the ADSL Line Configuration Profile Table, (adslLineConfProfileTable), which applies for this ADSL line, and channels if applicable. For `dynamic' mode, in the case which the configuration profile has not been set, the value will be set to `DEFVAL'. If the implementator of this MIB has chosen not to implement `dynamic assignment' of profiles, this object's MIN-ACCESS is read-only." ::= { adslLineEntry 4 } adslLineAlarmConfProfile OBJECT-TYPE SYNTAX AdslLineProfileName -- Rsyntax OCTET STRING(SIZE(1..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object identifies the row in the ADSL Line Alarm Configuration Profile Table, (adslLineAlarmConfProfileTable), which applies to this ADSL line, and channels if applicable. For `dynamic' mode, in the case which the alarm profile has not been set, the value will be set to `DEFVAL'. If the implementator of this MIB has chosen not to implement `dynamic assignment' of profiles, this object's MIN-ACCESS is read-only." ::= { adslLineEntry 5 } adslAtucPhysTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAtucPhysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides one row for each ATUC. Each row contains the Physical Layer Parameters table for that ATUC. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94)." ::= { adslMibObjects 2 } adslAtucPhysEntry OBJECT-TYPE SYNTAX AdslAtucPhysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adslAtucPhysTable." INDEX { ifIndex } ::= { adslAtucPhysTable 1 } AdslAtucPhysEntry ::= SEQUENCE { adslAtucInvSerialNumber OCTET STRING, adslAtucInvVendorID OCTET STRING, adslAtucInvVersionNumber OCTET STRING, adslAtucCurrSnrMgn Gauge, adslAtucCurrAtn Gauge, adslAtucCurrStatus OCTET STRING, adslAtucCurrOutputPwr Gauge, adslAtucCurrAttainableRate Gauge } adslAtucInvSerialNumber OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "Vendor specific string that identifies the vendor equipment." ::= { adslAtucPhysEntry 1 } adslAtucInvVendorID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor ID assigned by T1E1.413 according to its Annex D.[10]" ::= { adslAtucPhysEntry 2 } adslAtucInvVersionNumber OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "Vendor specific version number sent by this ATU as part of the initialization messages." ::= { adslAtucPhysEntry 3 } adslAtucCurrSnrMgn OBJECT-TYPE SYNTAX Gauge(0..310) -- Units -- tenth dB ACCESS read-only STATUS mandatory DESCRIPTION "Noise Margin as seen by this ATU with respect to its received signal in tenth dB." ::= { adslAtucPhysEntry 4 } adslAtucCurrAtn OBJECT-TYPE SYNTAX Gauge(0..630) -- Units -- tenth dB ACCESS read-only STATUS mandatory DESCRIPTION "Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU. This value is determined in accordance with T1.413[10]." ::= { adslAtucPhysEntry 5 } adslAtucCurrStatus OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Indicates current state of the ATUC line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There no defects on the line 1 lossOfFraming ATUC failure due to not receiving valid frame. 2 lossOfSignal ATUC failure due to not receiving signal. 3 lossOfPower ATUC failure due to loss of power. Note: the Agent may still function. 4 lossOfSignalQuality Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7. 5 lossOfLink ATUC failure due to inability to link with ATUR. 6 dataInitFailure ATUC failure during initialization due to bit errors corrupting startup exchange data. 7 configInitFailure ATUC failure during initialization due to peer ATU not able to support requested configuration 8 protocolInitFailure ATUC failure during initialization due to incompatible protocol used by the peer ATU. 9 noPeerAtuPresent ATUC failure during initialization due to no activation sequence detected from peer ATU. This is intended to supplement ifOperStatus." ::= { adslAtucPhysEntry 6 } adslAtucCurrOutputPwr OBJECT-TYPE SYNTAX Gauge(0..310) -- Units -- tenth dBm ACCESS read-only STATUS mandatory DESCRIPTION "Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence." ::= { adslAtucPhysEntry 7 } adslAtucCurrAttainableRate OBJECT-TYPE SYNTAX Gauge -- Units -- bps ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate." ::= { adslAtucPhysEntry 8 } adslAturPhysTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAturPhysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides one row for each ATUR Each row contains the Physical Layer Parameters table for that ATUR. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94)." ::= { adslMibObjects 3 } adslAturPhysEntry OBJECT-TYPE SYNTAX AdslAturPhysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adslAturPhysTable." INDEX { ifIndex } ::= { adslAturPhysTable 1 } AdslAturPhysEntry ::= SEQUENCE { adslAturInvSerialNumber OCTET STRING, adslAturInvVendorID OCTET STRING, adslAturInvVersionNumber OCTET STRING, adslAturCurrSnrMgn Gauge, adslAturCurrAtn Gauge, adslAturCurrStatus OCTET STRING, adslAturCurrOutputPwr Gauge, adslAturCurrAttainableRate Gauge } adslAturInvSerialNumber OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "Vendor specific string that identifies the vendor equipment." ::= { adslAturPhysEntry 1 } adslAturInvVendorID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor ID assigned by T1E1.413 according to its Annex D." ::= { adslAturPhysEntry 2 } adslAturInvVersionNumber OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "Vendor specific version number sent by this ATU as part of the initialization messages." ::= { adslAturPhysEntry 3 } adslAturCurrSnrMgn OBJECT-TYPE SYNTAX Gauge(0..310) -- Units -- tenth dB ACCESS read-only STATUS mandatory DESCRIPTION "Noise Margin as seen by this ATU with respect to its received signal. This value is determined in accordance with T1.413 [10]." ::= { adslAturPhysEntry 4 } adslAturCurrAtn OBJECT-TYPE SYNTAX Gauge(0..630) -- Units -- tenth dB ACCESS read-only STATUS mandatory DESCRIPTION "Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU. This value is determined in accordance with T1.413[10]." ::= { adslAturPhysEntry 5 } adslAturCurrStatus OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Indicates current state of the ATUR line. This is a bit-map of possible conditions. Due to the isolation of the ATUR when line problems occur, many state conditions like loss of power, loss of quality signal, and initialization errors, can not be determined. While trouble shooting ATUR, also use object, adslAtucCurrStatus. The various bit positions are: 0 noDefect There no defects on the line 1 lossOfFraming ATUR failure due to not receiving valid frame 2 lossOfSignal ATUR failure due to not receiving signal 3 lossOfPower ATUR failure due to loss of power 4 lossOfSignalQuality Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7. This is intended to supplement ifOperStatus." ::= { adslAturPhysEntry 6 } adslAturCurrOutputPwr OBJECT-TYPE SYNTAX Gauge(0..310) -- Units -- tenth dBm ACCESS read-only STATUS mandatory DESCRIPTION "Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence." ::= { adslAturPhysEntry 7 } adslAturCurrAttainableRate OBJECT-TYPE SYNTAX Gauge -- Units -- bps ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate." ::= { adslAturPhysEntry 8 } adslAtucChanTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAtucChanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides one row for each ATUC channel. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125)." ::= { adslMibObjects 4 } adslAtucChanEntry OBJECT-TYPE SYNTAX AdslAtucChanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adslAtucChanTable." INDEX { ifIndex } ::= { adslAtucChanTable 1 } AdslAtucChanEntry ::= SEQUENCE { adslAtucChanInterleaveDelay Gauge, adslAtucChanCurrTxRate Gauge, adslAtucChanPrevTxRate Gauge, adslAtucChanCrcBlockLength Gauge } adslAtucChanInterleaveDelay OBJECT-TYPE SYNTAX Gauge -- Units -- milli-seconds ACCESS read-only STATUS mandatory DESCRIPTION "Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency. In the case where the ifType is Fast(125), use noSuchObject." ::= { adslAtucChanEntry 1 } adslAtucChanCurrTxRate OBJECT-TYPE SYNTAX Gauge -- Units -- bps ACCESS read-only STATUS mandatory DESCRIPTION "Actual transmit rate on this channel." ::= { adslAtucChanEntry 2 } adslAtucChanPrevTxRate OBJECT-TYPE SYNTAX Gauge -- Units -- bps ACCESS read-only STATUS mandatory DESCRIPTION "The rate at the time of the last adslAtucRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAtucThresh(*)RateDown or less than adslAtucThresh(*)RateUp will not cause a trap or cause this object to change. (*) == Fast or Interleave. See AdslLineAlarmConfProfileEntry." ::= { adslAtucChanEntry 3 } adslAtucChanCrcBlockLength OBJECT-TYPE SYNTAX Gauge -- Units -- byte ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information." ::= { adslAtucChanEntry 4 } adslAturChanTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAturChanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides one row for each ATUR channel. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125)." ::= { adslMibObjects 5 } adslAturChanEntry OBJECT-TYPE SYNTAX AdslAturChanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adslAturChanTable." INDEX { ifIndex } ::= { adslAturChanTable 1 } AdslAturChanEntry ::= SEQUENCE { adslAturChanInterleaveDelay Gauge, adslAturChanCurrTxRate Gauge, adslAturChanPrevTxRate Gauge, adslAturChanCrcBlockLength Gauge } adslAturChanInterleaveDelay OBJECT-TYPE SYNTAX Gauge -- Units -- milli-seconds ACCESS read-only STATUS mandatory DESCRIPTION "Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency. In the case where the ifType is Fast(125), use noSuchObject." ::= { adslAturChanEntry 1 } adslAturChanCurrTxRate OBJECT-TYPE SYNTAX Gauge -- Units -- bps ACCESS read-only STATUS mandatory DESCRIPTION "Actual transmit rate on this channel." ::= { adslAturChanEntry 2 } adslAturChanPrevTxRate OBJECT-TYPE SYNTAX Gauge -- Units -- bps ACCESS read-only STATUS mandatory DESCRIPTION "The rate at the time of the last adslAturRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAturThresh(*)RateDown or less than adslAturThresh(*)RateUp will not cause a trap or cause this object to change. (*) == Fast or Interleave. See AdslLineAlarmConfProfileEntry." ::= { adslAturChanEntry 3 } adslAturChanCrcBlockLength OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information." ::= { adslAturChanEntry 4 } adslAtucPerfDataTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAtucPerfDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides one row for each ATUC. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94)." ::= { adslMibObjects 6 } adslAtucPerfDataEntry OBJECT-TYPE SYNTAX AdslAtucPerfDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in adslAtucPerfDataTable." INDEX { ifIndex } ::= { adslAtucPerfDataTable 1 } AdslAtucPerfDataEntry ::= SEQUENCE { adslAtucPerfLofs Counter, adslAtucPerfLoss Counter, adslAtucPerfLols Counter, adslAtucPerfLprs Counter, adslAtucPerfESs Counter, adslAtucPerfInits Counter, adslAtucPerfValidIntervals INTEGER, adslAtucPerfInvalidIntervals INTEGER, adslAtucPerfCurr15MinTimeElapsed PerfCurrentCount, adslAtucPerfCurr15MinLofs PerfCurrentCount, adslAtucPerfCurr15MinLoss PerfCurrentCount, adslAtucPerfCurr15MinLols PerfCurrentCount, adslAtucPerfCurr15MinLprs PerfCurrentCount, adslAtucPerfCurr15MinESs PerfCurrentCount, adslAtucPerfCurr15MinInits PerfCurrentCount, adslAtucPerfCurr1DayTimeElapsed INTEGER, adslAtucPerfCurr1DayLofs Gauge, adslAtucPerfCurr1DayLoss Gauge, adslAtucPerfCurr1DayLols Gauge, adslAtucPerfCurr1DayLprs Gauge, adslAtucPerfCurr1DayESs Gauge, adslAtucPerfCurr1DayInits Gauge, adslAtucPerfPrev1DayMoniSecs INTEGER, adslAtucPerfPrev1DayLofs Gauge, adslAtucPerfPrev1DayLoss Gauge, adslAtucPerfPrev1DayLols Gauge, adslAtucPerfPrev1DayLprs Gauge, adslAtucPerfPrev1DayESs Gauge, adslAtucPerfPrev1DayInits Gauge } adslAtucPerfLofs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of Loss of Framing failures since agent reset." ::= { adslAtucPerfDataEntry 1 } adslAtucPerfLoss OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of Loss of Signal failures since agent reset." ::= { adslAtucPerfDataEntry 2 } adslAtucPerfLols OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of Loss of Link failures since agent reset." ::= { adslAtucPerfDataEntry 3 } adslAtucPerfLprs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of Loss of Power failures since agent reset." ::= { adslAtucPerfDataEntry 4 } adslAtucPerfESs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { adslAtucPerfDataEntry 5 } adslAtucPerfInits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of the line initialization attempts since agent reset. Includes both successful and failed attempts." ::= { adslAtucPerfDataEntry 6 } adslAtucPerfValidIntervals OBJECT-TYPE SYNTAX INTEGER(0..96) ACCESS read-only STATUS mandatory DESCRIPTION "Number of previous 15-minute intervals in the adslAtucInterval Table for which valid data has been stored. This value will be equal to the maximum # of intervals that are kept (n) unless the device was brought online within the last (nx15) minutes. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval for which valid data is available." ::= { adslAtucPerfDataEntry 7 } adslAtucPerfInvalidIntervals OBJECT-TYPE SYNTAX INTEGER(0..96) ACCESS read-only STATUS mandatory DESCRIPTION "The number of 15 minute intervals in which no valid data is available." ::= { adslAtucPerfDataEntry 8 } adslAtucPerfCurr15MinTimeElapsed OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Total elapsed seconds in this interval. A full interval is 900 seconds." ::= { adslAtucPerfDataEntry 9 } adslAtucPerfCurr15MinLofs OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Framing." ::= { adslAtucPerfDataEntry 10 } adslAtucPerfCurr15MinLoss OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Signal." ::= { adslAtucPerfDataEntry 11 } adslAtucPerfCurr15MinLols OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Link." ::= { adslAtucPerfDataEntry 12 } adslAtucPerfCurr15MinLprs OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Power." ::= { adslAtucPerfDataEntry 13 } adslAtucPerfCurr15MinESs OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of Errored Seconds in the current 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { adslAtucPerfDataEntry 14 } adslAtucPerfCurr15MinInits OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of the line initialization attempts in the current 15 minute interval. Includes both successful and failed attempts." ::= { adslAtucPerfDataEntry 15 } adslAtucPerfCurr1DayTimeElapsed OBJECT-TYPE SYNTAX INTEGER(0..86399) -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds that have elapsed since the beginning of the current 1-day interval." ::= { adslAtucPerfDataEntry 16 } adslAtucPerfCurr1DayLofs OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of seconds when there was Loss of Framing during the current day as measured by adslAtucPerfCurr1DayTimeElapsed." ::= { adslAtucPerfDataEntry 17 } adslAtucPerfCurr1DayLoss OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of seconds when there was Loss of Signal during the current day as measured by adslAtucPerfCurr1DayTimeElapsed." ::= { adslAtucPerfDataEntry 18 } adslAtucPerfCurr1DayLols OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of seconds when there was Loss of Link during the current day as measured by adslAtucPerfCurr1DayTimeElapsed." ::= { adslAtucPerfDataEntry 19 } adslAtucPerfCurr1DayLprs OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of seconds when there was Loss of Power during the current day as measured by adslAtucPerfCurr1DayTimeElapsed." ::= { adslAtucPerfDataEntry 20 } adslAtucPerfCurr1DayESs OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { adslAtucPerfDataEntry 21 } adslAtucPerfCurr1DayInits OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of the line initialization attempts in the day as measured by adslAtucPerfCurr1DayTimeElapsed. Includes both successful and failed attempts." ::= { adslAtucPerfDataEntry 22 } adslAtucPerfPrev1DayMoniSecs OBJECT-TYPE SYNTAX INTEGER(0..899) -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "The time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will normally be the same as the total interval duration except in a situation where performance monitoring data can not be collected for any reason. Typically Elapsed 1-day time will be copied into Monitored Seconds when the 1-day roll-over occurs." ::= { adslAtucPerfDataEntry 23 } adslAtucPerfPrev1DayLofs OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period." ::= { adslAtucPerfDataEntry 24 } adslAtucPerfPrev1DayLoss OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period." ::= { adslAtucPerfDataEntry 25 } adslAtucPerfPrev1DayLols OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the interval when there was Loss of Link within the most recent previous 1-day period." ::= { adslAtucPerfDataEntry 26 } adslAtucPerfPrev1DayLprs OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period." ::= { adslAtucPerfDataEntry 27 } adslAtucPerfPrev1DayESs OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { adslAtucPerfDataEntry 28 } adslAtucPerfPrev1DayInits OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of the line initialization attempts in the most recent previous 1-day period. Includes both successful and failed attempts." ::= { adslAtucPerfDataEntry 29 } adslAturPerfDataTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAturPerfDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides one row for each ATUR. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94)." ::= { adslMibObjects 7 } adslAturPerfDataEntry OBJECT-TYPE SYNTAX AdslAturPerfDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in adslAturPerfDataTable." INDEX { ifIndex } ::= { adslAturPerfDataTable 1 } AdslAturPerfDataEntry ::= SEQUENCE { adslAturPerfLofs Counter, adslAturPerfLoss Counter, adslAturPerfLprs Counter, adslAturPerfESs Counter, adslAturPerfValidIntervals INTEGER, adslAturPerfInvalidIntervals INTEGER, adslAturPerfCurr15MinTimeElapsed PerfCurrentCount, adslAturPerfCurr15MinLofs PerfCurrentCount, adslAturPerfCurr15MinLoss PerfCurrentCount, adslAturPerfCurr15MinLprs PerfCurrentCount, adslAturPerfCurr15MinESs PerfCurrentCount, adslAturPerfCurr1DayTimeElapsed INTEGER, adslAturPerfCurr1DayLofs Gauge, adslAturPerfCurr1DayLoss Gauge, adslAturPerfCurr1DayLprs Gauge, adslAturPerfCurr1DayESs Gauge, adslAturPerfPrev1DayMoniSecs INTEGER, adslAturPerfPrev1DayLofs Gauge, adslAturPerfPrev1DayLoss Gauge, adslAturPerfPrev1DayLprs Gauge, adslAturPerfPrev1DayESs Gauge } adslAturPerfLofs OBJECT-TYPE SYNTAX Counter -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of Loss of Framing failures since agent reset." ::= { adslAturPerfDataEntry 1 } adslAturPerfLoss OBJECT-TYPE SYNTAX Counter -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of Loss of Signal failures since agent reset." ::= { adslAturPerfDataEntry 2 } adslAturPerfLprs OBJECT-TYPE SYNTAX Counter -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of Loss of Power failures since agent reset." ::= { adslAturPerfDataEntry 3 } adslAturPerfESs OBJECT-TYPE SYNTAX Counter -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { adslAturPerfDataEntry 4 } adslAturPerfValidIntervals OBJECT-TYPE SYNTAX INTEGER(0..96) ACCESS read-only STATUS mandatory DESCRIPTION "Number of previous 15-minute intervals in the adslAturInterval Table for which valid data has been stored. This value will be equal to the maximum # of intervals that are kept (n) unless the device was brought online within the last (nx15) min. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval for which valid data is available." ::= { adslAturPerfDataEntry 5 } adslAturPerfInvalidIntervals OBJECT-TYPE SYNTAX INTEGER(0..96) ACCESS read-only STATUS mandatory DESCRIPTION "The number of 15 minute intervals in which no valid data is available." ::= { adslAturPerfDataEntry 6 } adslAturPerfCurr15MinTimeElapsed OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Total elapsed seconds in this interval. A full interval is 900 seconds." ::= { adslAturPerfDataEntry 7 } adslAturPerfCurr15MinLofs OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Framing." ::= { adslAturPerfDataEntry 8 } adslAturPerfCurr15MinLoss OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Signal." ::= { adslAturPerfDataEntry 9 } adslAturPerfCurr15MinLprs OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Power." ::= { adslAturPerfDataEntry 10 } adslAturPerfCurr15MinESs OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of Errored Seconds in the current 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { adslAturPerfDataEntry 11 } adslAturPerfCurr1DayTimeElapsed OBJECT-TYPE SYNTAX INTEGER(0..86399) -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds that have elapsed since the beginning of the current 1-day interval." ::= { adslAturPerfDataEntry 12 } adslAturPerfCurr1DayLofs OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of seconds when there was Loss of Framing during the current day as measured by adslAturPerfCurr1DayTimeElapsed." ::= { adslAturPerfDataEntry 13 } adslAturPerfCurr1DayLoss OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of seconds when there was Loss of Signal during the current day as measured by adslAturPerfCurr1DayTimeElapsed." ::= { adslAturPerfDataEntry 14 } adslAturPerfCurr1DayLprs OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of seconds when there was Loss of Power during the current day as measured by adslAturPerfCurr1DayTimeElapsed." ::= { adslAturPerfDataEntry 15 } adslAturPerfCurr1DayESs OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of Errored Seconds during the current day as measured by adslAturPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { adslAturPerfDataEntry 16 } adslAturPerfPrev1DayMoniSecs OBJECT-TYPE SYNTAX INTEGER(0..899) -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "The time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will normally be the same as the total interval duration except in a situation where performance monitoring data can not be collected for any reason. Typically Elapsed 1-day time will be copied into Monitored Seconds when the 1-day roll-over occurs." ::= { adslAturPerfDataEntry 17 } adslAturPerfPrev1DayLofs OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period." ::= { adslAturPerfDataEntry 18 } adslAturPerfPrev1DayLoss OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period." ::= { adslAturPerfDataEntry 19 } adslAturPerfPrev1DayLprs OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period." ::= { adslAturPerfDataEntry 20 } adslAturPerfPrev1DayESs OBJECT-TYPE SYNTAX Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { adslAturPerfDataEntry 21 } adslAtucIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAtucIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides one row for each ATUC performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94)." ::= { adslMibObjects 8 } adslAtucIntervalEntry OBJECT-TYPE SYNTAX AdslAtucIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adslAtucIntervalTable." INDEX { ifIndex, adslAtucIntervalNumber } ::= { adslAtucIntervalTable 1 } AdslAtucIntervalEntry ::= SEQUENCE { adslAtucIntervalNumber INTEGER, adslAtucIntervalLofs PerfIntervalCount, adslAtucIntervalLoss PerfIntervalCount, adslAtucIntervalLols PerfIntervalCount, adslAtucIntervalLprs PerfIntervalCount, adslAtucIntervalESs PerfIntervalCount, adslAtucIntervalInits PerfIntervalCount, adslAtucIntervalValidData TruthValue } adslAtucIntervalNumber OBJECT-TYPE SYNTAX INTEGER(1..96) ACCESS not-accessible STATUS mandatory DESCRIPTION "Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional." ::= { adslAtucIntervalEntry 1 } adslAtucIntervalLofs OBJECT-TYPE SYNTAX PerfIntervalCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the interval when there was Loss of Framing." ::= { adslAtucIntervalEntry 2 } adslAtucIntervalLoss OBJECT-TYPE SYNTAX PerfIntervalCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the interval when there was Loss of Signal." ::= { adslAtucIntervalEntry 3 } adslAtucIntervalLols OBJECT-TYPE SYNTAX PerfIntervalCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the interval when there was Loss of Link." ::= { adslAtucIntervalEntry 4 } adslAtucIntervalLprs OBJECT-TYPE SYNTAX PerfIntervalCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the interval when there was Loss of Power." ::= { adslAtucIntervalEntry 5 } adslAtucIntervalESs OBJECT-TYPE SYNTAX PerfIntervalCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { adslAtucIntervalEntry 6 } adslAtucIntervalInits OBJECT-TYPE SYNTAX PerfIntervalCount -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of the line initialization attempts during the interval. Includes both successful and failed attempts." ::= { adslAtucIntervalEntry 7 } adslAtucIntervalValidData OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates if there is valid data for this interval." ::= { adslAtucIntervalEntry 8 } adslAturIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAturIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides one row for each ATUR performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94)." ::= { adslMibObjects 9 } adslAturIntervalEntry OBJECT-TYPE SYNTAX AdslAturIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adslAturIntervalTable." INDEX { ifIndex, adslAturIntervalNumber } ::= { adslAturIntervalTable 1 } AdslAturIntervalEntry ::= SEQUENCE { adslAturIntervalNumber INTEGER, adslAturIntervalLofs PerfIntervalCount, adslAturIntervalLoss PerfIntervalCount, adslAturIntervalLprs PerfIntervalCount, adslAturIntervalESs PerfIntervalCount, adslAturIntervalValidData TruthValue } adslAturIntervalNumber OBJECT-TYPE SYNTAX INTEGER(1..96) ACCESS not-accessible STATUS mandatory DESCRIPTION "Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional." ::= { adslAturIntervalEntry 1 } adslAturIntervalLofs OBJECT-TYPE SYNTAX PerfIntervalCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the interval when there was Loss of Framing." ::= { adslAturIntervalEntry 2 } adslAturIntervalLoss OBJECT-TYPE SYNTAX PerfIntervalCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the interval when there was Loss of Signal." ::= { adslAturIntervalEntry 3 } adslAturIntervalLprs OBJECT-TYPE SYNTAX PerfIntervalCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of seconds in the interval when there was Loss of Power." ::= { adslAturIntervalEntry 4 } adslAturIntervalESs OBJECT-TYPE SYNTAX PerfIntervalCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { adslAturIntervalEntry 5 } adslAturIntervalValidData OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates if there is valid data for this interval." ::= { adslAturIntervalEntry 6 } adslAtucChanPerfDataTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAtucChanPerfDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides one row for each ATUC channel. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125)." ::= { adslMibObjects 10 } adslAtucChanPerfDataEntry OBJECT-TYPE SYNTAX AdslAtucChanPerfDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in adslAtucChanPerfDataTable." INDEX { ifIndex } ::= { adslAtucChanPerfDataTable 1 } AdslAtucChanPerfDataEntry ::= SEQUENCE { adslAtucChanReceivedBlks Counter, adslAtucChanTransmittedBlks Counter, adslAtucChanCorrectedBlks Counter, adslAtucChanUncorrectBlks Counter, adslAtucChanPerfValidIntervals INTEGER, adslAtucChanPerfInvalidIntervals INTEGER, adslAtucChanPerfCurr15MinTimeElapsed PerfCurrentCount, adslAtucChanPerfCurr15MinReceivedBlks PerfCurrentCount, adslAtucChanPerfCurr15MinTransmittedBlks PerfCurrentCount, adslAtucChanPerfCurr15MinCorrectedBlks PerfCurrentCount, adslAtucChanPerfCurr15MinUncorrectBlks PerfCurrentCount, adslAtucChanPerfCurr1DayTimeElapsed INTEGER, adslAtucChanPerfCurr1DayReceivedBlks Gauge, adslAtucChanPerfCurr1DayTransmittedBlks Gauge, adslAtucChanPerfCurr1DayCorrectedBlks Gauge, adslAtucChanPerfCurr1DayUncorrectBlks Gauge, adslAtucChanPerfPrev1DayMoniSecs INTEGER, adslAtucChanPerfPrev1DayReceivedBlks Gauge, adslAtucChanPerfPrev1DayTransmittedBlks Gauge, adslAtucChanPerfPrev1DayCorrectedBlks Gauge, adslAtucChanPerfPrev1DayUncorrectBlks Gauge } adslAtucChanReceivedBlks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks received on this channel since agent reset." ::= { adslAtucChanPerfDataEntry 1 } adslAtucChanTransmittedBlks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks transmitted on this channel since agent reset." ::= { adslAtucChanPerfDataEntry 2 } adslAtucChanCorrectedBlks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data." ::= { adslAtucChanPerfDataEntry 3 } adslAtucChanUncorrectBlks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with uncorrectable errors since agent reset." ::= { adslAtucChanPerfDataEntry 4 } adslAtucChanPerfValidIntervals OBJECT-TYPE SYNTAX INTEGER(0..96) ACCESS read-only STATUS mandatory DESCRIPTION "Number of previous 15-minute intervals in the adslAtucChanIntervalTable Table for which valid data has been stored. This value will be equal to the max number of intervals that are kept (n) unless the device was brought online within the last (nx15) minutes. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval for which valid data is available." ::= { adslAtucChanPerfDataEntry 5 } adslAtucChanPerfInvalidIntervals OBJECT-TYPE SYNTAX INTEGER(0..96) ACCESS read-only STATUS mandatory DESCRIPTION "The number of 15 minute intervals in which no valid data is available." ::= { adslAtucChanPerfDataEntry 6 } adslAtucChanPerfCurr15MinTimeElapsed OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Total elapsed seconds in this interval. A full interval is 900 seconds." ::= { adslAtucChanPerfDataEntry 7 } adslAtucChanPerfCurr15MinReceivedBlks OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks received on this channel within the current 15 minute interval." ::= { adslAtucChanPerfDataEntry 8 } adslAtucChanPerfCurr15MinTransmittedBlks OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks transmitted on this channel within the current 15 minute interval." ::= { adslAtucChanPerfDataEntry 9 } adslAtucChanPerfCurr15MinCorrectedBlks OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with errors that were corrected on this channel within the current 15 minute interval." ::= { adslAtucChanPerfDataEntry 10 } adslAtucChanPerfCurr15MinUncorrectBlks OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval." ::= { adslAtucChanPerfDataEntry 11 } adslAtucChanPerfCurr1DayTimeElapsed OBJECT-TYPE SYNTAX INTEGER(0..86399) -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds that have elapsed since the beginning of the current 1-day interval." ::= { adslAtucChanPerfDataEntry 12 } adslAtucChanPerfCurr1DayReceivedBlks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks received on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed." ::= { adslAtucChanPerfDataEntry 13 } adslAtucChanPerfCurr1DayTransmittedBlks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks transmitted on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed." ::= { adslAtucChanPerfDataEntry 14 } adslAtucChanPerfCurr1DayCorrectedBlks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with errors that were corrected on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed." ::= { adslAtucChanPerfDataEntry 15 } adslAtucChanPerfCurr1DayUncorrectBlks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed." ::= { adslAtucChanPerfDataEntry 16 } adslAtucChanPerfPrev1DayMoniSecs OBJECT-TYPE SYNTAX INTEGER(0..86399) -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "The time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will normally be the same as the total interval duration except in a situation where performance monitoring information can not be collected for any reason. Typically Elapsed 1-day time will be copied into Monitored Seconds when the 1-day roll-over occurs." ::= { adslAtucChanPerfDataEntry 17 } adslAtucChanPerfPrev1DayReceivedBlks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks received on this channel within the most recent previous 1-day period." ::= { adslAtucChanPerfDataEntry 18 } adslAtucChanPerfPrev1DayTransmittedBlks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period." ::= { adslAtucChanPerfDataEntry 19 } adslAtucChanPerfPrev1DayCorrectedBlks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period." ::= { adslAtucChanPerfDataEntry 20 } adslAtucChanPerfPrev1DayUncorrectBlks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period." ::= { adslAtucChanPerfDataEntry 21 } adslAturChanPerfDataTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAturChanPerfDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides one row for each ATUR channel. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125)." ::= { adslMibObjects 11 } adslAturChanPerfDataEntry OBJECT-TYPE SYNTAX AdslAturChanPerfDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in adslAturChanPerfDataTable." INDEX { ifIndex } ::= { adslAturChanPerfDataTable 1 } AdslAturChanPerfDataEntry ::= SEQUENCE { adslAturChanReceivedBlks Counter, adslAturChanTransmittedBlks Counter, adslAturChanCorrectedBlks Counter, adslAturChanUncorrectBlks Counter, adslAturChanPerfValidIntervals INTEGER, adslAturChanPerfInvalidIntervals INTEGER, adslAturChanPerfCurr15MinTimeElapsed PerfCurrentCount, adslAturChanPerfCurr15MinReceivedBlks PerfCurrentCount, adslAturChanPerfCurr15MinTransmittedBlks PerfCurrentCount, adslAturChanPerfCurr15MinCorrectedBlks PerfCurrentCount, adslAturChanPerfCurr15MinUncorrectBlks PerfCurrentCount, adslAturChanPerfCurr1DayTimeElapsed INTEGER, adslAturChanPerfCurr1DayReceivedBlks Gauge, adslAturChanPerfCurr1DayTransmittedBlks Gauge, adslAturChanPerfCurr1DayCorrectedBlks Gauge, adslAturChanPerfCurr1DayUncorrectBlks Gauge, adslAturChanPerfPrev1DayMoniSecs INTEGER, adslAturChanPerfPrev1DayReceivedBlks Gauge, adslAturChanPerfPrev1DayTransmittedBlks Gauge, adslAturChanPerfPrev1DayCorrectedBlks Gauge, adslAturChanPerfPrev1DayUncorrectBlks Gauge } adslAturChanReceivedBlks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks received on this channel since agent reset." ::= { adslAturChanPerfDataEntry 1 } adslAturChanTransmittedBlks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks transmitted on this channel since agent reset." ::= { adslAturChanPerfDataEntry 2 } adslAturChanCorrectedBlks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data." ::= { adslAturChanPerfDataEntry 3 } adslAturChanUncorrectBlks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with uncorrectable errors since agent reset." ::= { adslAturChanPerfDataEntry 4 } adslAturChanPerfValidIntervals OBJECT-TYPE SYNTAX INTEGER(0..96) ACCESS read-only STATUS mandatory DESCRIPTION "Number of previous 15-minute intervals in the adslAturChanIntervalTable Table for which valid data has been stored. This value will be equal to the max # of intervals that are kept (n) unless the device was brought online within the last (nx15) minutes. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval for which valid data is available." ::= { adslAturChanPerfDataEntry 5 } adslAturChanPerfInvalidIntervals OBJECT-TYPE SYNTAX INTEGER(0..96) ACCESS read-only STATUS mandatory DESCRIPTION "The number of 15 minute intervals in which no valid data is available." ::= { adslAturChanPerfDataEntry 6 } adslAturChanPerfCurr15MinTimeElapsed OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Total elapsed seconds in this interval. A full interval is 900 seconds." ::= { adslAturChanPerfDataEntry 7 } adslAturChanPerfCurr15MinReceivedBlks OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks received on this channel within the current 15 minute interval." ::= { adslAturChanPerfDataEntry 8 } adslAturChanPerfCurr15MinTransmittedBlks OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks transmitted on this channel within the current 15 minute interval." ::= { adslAturChanPerfDataEntry 9 } adslAturChanPerfCurr15MinCorrectedBlks OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with errors that were corrected on this channel within the current 15 minute interval." ::= { adslAturChanPerfDataEntry 10 } adslAturChanPerfCurr15MinUncorrectBlks OBJECT-TYPE SYNTAX PerfCurrentCount -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval." ::= { adslAturChanPerfDataEntry 11 } adslAturChanPerfCurr1DayTimeElapsed OBJECT-TYPE SYNTAX INTEGER(0..86399) -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds that have elapsed since the beginning of the current 1-day interval." ::= { adslAturChanPerfDataEntry 12 } adslAturChanPerfCurr1DayReceivedBlks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks received on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed." ::= { adslAturChanPerfDataEntry 13 } adslAturChanPerfCurr1DayTransmittedBlks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks transmitted on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed." ::= { adslAturChanPerfDataEntry 14 } adslAturChanPerfCurr1DayCorrectedBlks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with errors that were corrected on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed." ::= { adslAturChanPerfDataEntry 15 } adslAturChanPerfCurr1DayUncorrectBlks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed." ::= { adslAturChanPerfDataEntry 16 } adslAturChanPerfPrev1DayMoniSecs OBJECT-TYPE SYNTAX INTEGER(0..86399) -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "The time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will normally be the same as the total interval duration except in a situation where performance monitoring information can not be collected for any reason. Typically Elapsed 1-day time will be copied into Monitored Seconds when the 1-day roll-over occurs." ::= { adslAturChanPerfDataEntry 17 } adslAturChanPerfPrev1DayReceivedBlks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks received on this channel within the most recent previous 1-day period." ::= { adslAturChanPerfDataEntry 18 } adslAturChanPerfPrev1DayTransmittedBlks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period." ::= { adslAturChanPerfDataEntry 19 } adslAturChanPerfPrev1DayCorrectedBlks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period." ::= { adslAturChanPerfDataEntry 20 } adslAturChanPerfPrev1DayUncorrectBlks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period." ::= { adslAturChanPerfDataEntry 21 } adslAtucChanIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAtucChanIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides one row for each ATUC channel's performance data collection interval. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125)." ::= { adslMibObjects 12 } adslAtucChanIntervalEntry OBJECT-TYPE SYNTAX AdslAtucChanIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adslAtucIntervalTable." INDEX { ifIndex, adslAtucChanIntervalNumber } ::= { adslAtucChanIntervalTable 1 } AdslAtucChanIntervalEntry ::= SEQUENCE { adslAtucChanIntervalNumber INTEGER, adslAtucChanIntervalReceivedBlks PerfIntervalCount, adslAtucChanIntervalTransmittedBlks PerfIntervalCount, adslAtucChanIntervalCorrectedBlks PerfIntervalCount, adslAtucChanIntervalUncorrectBlks PerfIntervalCount, adslAtucChanIntervalValidData TruthValue } adslAtucChanIntervalNumber OBJECT-TYPE SYNTAX INTEGER(1..96) ACCESS not-accessible STATUS mandatory DESCRIPTION "Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional." ::= { adslAtucChanIntervalEntry 1 } adslAtucChanIntervalReceivedBlks OBJECT-TYPE SYNTAX PerfIntervalCount -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks received on this channel during this interval." ::= { adslAtucChanIntervalEntry 2 } adslAtucChanIntervalTransmittedBlks OBJECT-TYPE SYNTAX PerfIntervalCount -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks transmitted on this channel during this interval." ::= { adslAtucChanIntervalEntry 3 } adslAtucChanIntervalCorrectedBlks OBJECT-TYPE SYNTAX PerfIntervalCount -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with errors that were corrected on this channel during this interval." ::= { adslAtucChanIntervalEntry 4 } adslAtucChanIntervalUncorrectBlks OBJECT-TYPE SYNTAX PerfIntervalCount -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel during this interval." ::= { adslAtucChanIntervalEntry 5 } adslAtucChanIntervalValidData OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates if there is valid data for this interval." ::= { adslAtucChanIntervalEntry 6 } adslAturChanIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAturChanIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides one row for each ATUR channel's performance data collection interval. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125)." ::= { adslMibObjects 13 } adslAturChanIntervalEntry OBJECT-TYPE SYNTAX AdslAturChanIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adslAturIntervalTable." INDEX { ifIndex, adslAturChanIntervalNumber } ::= { adslAturChanIntervalTable 1 } AdslAturChanIntervalEntry ::= SEQUENCE { adslAturChanIntervalNumber INTEGER, adslAturChanIntervalReceivedBlks PerfIntervalCount, adslAturChanIntervalTransmittedBlks PerfIntervalCount, adslAturChanIntervalCorrectedBlks PerfIntervalCount, adslAturChanIntervalUncorrectBlks PerfIntervalCount, adslAturChanIntervalValidData TruthValue } adslAturChanIntervalNumber OBJECT-TYPE SYNTAX INTEGER(1..96) ACCESS not-accessible STATUS mandatory DESCRIPTION "Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional." ::= { adslAturChanIntervalEntry 1 } adslAturChanIntervalReceivedBlks OBJECT-TYPE SYNTAX PerfIntervalCount -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks received on this channel during this interval." ::= { adslAturChanIntervalEntry 2 } adslAturChanIntervalTransmittedBlks OBJECT-TYPE SYNTAX PerfIntervalCount -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all encoded blocks transmitted on this channel during this interval." ::= { adslAturChanIntervalEntry 3 } adslAturChanIntervalCorrectedBlks OBJECT-TYPE SYNTAX PerfIntervalCount -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with errors that were corrected on this channel during this interval." ::= { adslAturChanIntervalEntry 4 } adslAturChanIntervalUncorrectBlks OBJECT-TYPE SYNTAX PerfIntervalCount -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel during this interval." ::= { adslAturChanIntervalEntry 5 } adslAturChanIntervalValidData OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates if there is valid data for this interval." ::= { adslAturChanIntervalEntry 6 } adslLineConfProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslLineConfProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the ADSL line." ::= { adslMibObjects 14 } adslLineConfProfileEntry OBJECT-TYPE SYNTAX AdslLineConfProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry consists of a list of parameters that represents the configuration of an ADSL modem. When `dynamic' profiles are implemented, a profile is created in one step with all necessary parameter values and adslLineProfileRowStatus set to createAndGo. This RowStatus object is also used to destroy profiles. Also when `dynamic' profiles are implemented, a default profile will always exist. This profile's name will be set to `DEFVAL' and its parameters will be set to vendor specific values, unless otherwise specified in this document. When `static' profiles are implemented, profiles are automically created or destroyed as ADSL physical lines are discovered and removed by the system. The name of the profile will be equivalent to the decimal value of the line's interface index." INDEX { --?? IMPLIED may cause problems IMPLIED adslLineConfProfileName } ::= { adslLineConfProfileTable 1 } AdslLineConfProfileEntry ::= SEQUENCE { adslLineConfProfileName AdslLineProfileName, adslAtucConfRateMode INTEGER, adslAtucConfRateChanRatio INTEGER, adslAtucConfTargetSnrMgn INTEGER, adslAtucConfMaxSnrMgn INTEGER, adslAtucConfMinSnrMgn INTEGER, adslAtucConfDownshiftSnrMgn INTEGER, adslAtucConfUpshiftSnrMgn INTEGER, adslAtucConfMinUpshiftTime INTEGER, adslAtucConfMinDownshiftTime INTEGER, adslAtucChanConfFastMinTxRate INTEGER, adslAtucChanConfInterleaveMinTxRate INTEGER, adslAtucChanConfFastMaxTxRate INTEGER, adslAtucChanConfInterleaveMaxTxRate INTEGER, adslAtucChanConfMaxInterleaveDelay INTEGER, adslAturConfRateMode INTEGER, adslAturConfRateChanRatio INTEGER, adslAturConfTargetSnrMgn INTEGER, adslAturConfMaxSnrMgn INTEGER, adslAturConfMinSnrMgn INTEGER, adslAturConfDownshiftSnrMgn INTEGER, adslAturConfUpshiftSnrMgn INTEGER, adslAturConfMinUpshiftTime INTEGER, adslAturConfMinDownshiftTime INTEGER, adslAturChanConfFastMinTxRate INTEGER, adslAturChanConfInterleaveMinTxRate INTEGER, adslAturChanConfFastMaxTxRate INTEGER, adslAturChanConfInterleaveMaxTxRate INTEGER, adslAturChanConfMaxInterleaveDelay INTEGER, adslLineConfProfileRowStatus RowStatus } adslLineConfProfileName OBJECT-TYPE SYNTAX AdslLineProfileName -- Rsyntax OCTET STRING(SIZE(1..32)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This object is used by the line configuration table in order to identify a row of this table. When `dynamic' profiles are implemented, the profile name is user specified. Also, the system will always provide a default profile whose name is `DEFVAL'. When `static' profiles are implemented, there is an one-to-one relationship between each line and its profile. In which case, the profile name will need to algorithmicly represent the Line's ifIndex. Therefore, the profile's name is a decimalized string of the ifIndex that is fixed-length (i.e., 10) with leading zero(s). For example, the profile name for ifIndex which equals '15' will be '0000000015'." ::= { adslLineConfProfileEntry 1 } adslAtucConfRateMode OBJECT-TYPE SYNTAX INTEGER { fixed(1), adaptAtStartup(2), adaptAtRuntime(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information." ::= { adslLineConfProfileEntry 2 } adslAtucConfRateChanRatio OBJECT-TYPE SYNTAX INTEGER(0..100) -- Units -- % ACCESS read-write STATUS mandatory DESCRIPTION "Configured allocation ratio of excess transmit bandwidth between fast and interleaved channels. Only applies when two channel mode and RADSL are supported. Distribute bandwidth on each channel in excess of the corresponding ChanConfMinTxRate so that: adslAtucConfRateChanRatio = [Fast / (Fast + Interleaved)] * 100 In other words this value is the fast channel percentage." ::= { adslLineConfProfileEntry 3 } adslAtucConfTargetSnrMgn OBJECT-TYPE SYNTAX INTEGER(0..310) -- Units -- tenth dB ACCESS read-write STATUS mandatory DESCRIPTION "Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization." ::= { adslLineConfProfileEntry 4 } adslAtucConfMaxSnrMgn OBJECT-TYPE SYNTAX INTEGER(0..310) -- Units -- tenth dB ACCESS read-write STATUS mandatory DESCRIPTION "Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation." ::= { adslLineConfProfileEntry 5 } adslAtucConfMinSnrMgn OBJECT-TYPE SYNTAX INTEGER(0..310) -- Units -- tenth dB ACCESS read-write STATUS mandatory DESCRIPTION "Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down." ::= { adslLineConfProfileEntry 6 } adslAtucConfDownshiftSnrMgn OBJECT-TYPE SYNTAX INTEGER(0..310) -- Units -- tenth dB ACCESS read-write STATUS mandatory DESCRIPTION "Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL is not present, the value will be `0'." ::= { adslLineConfProfileEntry 7 } adslAtucConfUpshiftSnrMgn OBJECT-TYPE SYNTAX INTEGER(0..310) -- Units -- tenth dB ACCESS read-write STATUS mandatory DESCRIPTION "Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'." ::= { adslLineConfProfileEntry 8 } adslAtucConfMinUpshiftTime OBJECT-TYPE SYNTAX INTEGER(0..16383) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. In the case that RADSL is not present, the value will be `0'." ::= { adslLineConfProfileEntry 9 } adslAtucConfMinDownshiftTime OBJECT-TYPE SYNTAX INTEGER(0..16383) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs. In the case that RADSL is not present, the value will be `0'." ::= { adslLineConfProfileEntry 10 } adslAtucChanConfFastMinTxRate OBJECT-TYPE SYNTAX INTEGER -- Units -- bps ACCESS read-write STATUS mandatory DESCRIPTION "Configured Minimum Transmit rate for `Fast' channels, in bps. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates." ::= { adslLineConfProfileEntry 11 } adslAtucChanConfInterleaveMinTxRate OBJECT-TYPE SYNTAX INTEGER -- Units -- bps ACCESS read-write STATUS mandatory DESCRIPTION "Configured Minimum Transmit rate for `Interleave' channels, in bps. See adslAtucConfRateChanRatio for information regarding RADSL mode and see ATUR transmit rate for receive rates." ::= { adslLineConfProfileEntry 12 } adslAtucChanConfFastMaxTxRate OBJECT-TYPE SYNTAX INTEGER -- Units -- bps ACCESS read-write STATUS mandatory DESCRIPTION "Configured Maximum Transmit rate for `Fast' channels, in bps. See adslAtucConfRateChanRatio for information regarding RADSL mode and see ATUR transmit rate for ATUC receive rates." ::= { adslLineConfProfileEntry 13 } adslAtucChanConfInterleaveMaxTxRate OBJECT-TYPE SYNTAX INTEGER -- Units -- bps ACCESS read-write STATUS mandatory DESCRIPTION "Configured Maximum Transmit rate for `Interleave' channels, in bps. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates." ::= { adslLineConfProfileEntry 14 } adslAtucChanConfMaxInterleaveDelay OBJECT-TYPE SYNTAX INTEGER(0..255) -- Units -- milli-seconds ACCESS read-write STATUS mandatory DESCRIPTION "Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency." ::= { adslLineConfProfileEntry 15 } adslAturConfRateMode OBJECT-TYPE SYNTAX INTEGER { fixed(1), adaptAtStartup(2), adaptAtRuntime(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information." ::= { adslLineConfProfileEntry 16 } adslAturConfRateChanRatio OBJECT-TYPE SYNTAX INTEGER(0..100) -- Units -- % ACCESS read-write STATUS mandatory DESCRIPTION "Configured allocation ratio of excess transmit bandwidth between fast and interleaved channels. Only applies when two channel mode and RADSL are supported. Distribute bandwidth on each channel in excess of the corresponding ChanConfMinTxRate so that: adslAturConfRateChanRatio = [Fast / (Fast + Interleaved)] * 100 In other words this value is the fast channel percentage." ::= { adslLineConfProfileEntry 17 } adslAturConfTargetSnrMgn OBJECT-TYPE SYNTAX INTEGER(0..310) -- Units -- tenth dB ACCESS read-write STATUS mandatory DESCRIPTION "Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization." ::= { adslLineConfProfileEntry 18 } adslAturConfMaxSnrMgn OBJECT-TYPE SYNTAX INTEGER(0..310) -- Units -- tenth dB ACCESS read-write STATUS mandatory DESCRIPTION "Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation." ::= { adslLineConfProfileEntry 19 } adslAturConfMinSnrMgn OBJECT-TYPE SYNTAX INTEGER(0..310) -- Units -- tenth dB ACCESS read-write STATUS mandatory DESCRIPTION "Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down." ::= { adslLineConfProfileEntry 20 } adslAturConfDownshiftSnrMgn OBJECT-TYPE SYNTAX INTEGER(0..310) -- Units -- tenth dB ACCESS read-write STATUS mandatory DESCRIPTION "Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL is not present, the value will be `0'." ::= { adslLineConfProfileEntry 21 } adslAturConfUpshiftSnrMgn OBJECT-TYPE SYNTAX INTEGER(0..310) -- Units -- tenth dB ACCESS read-write STATUS mandatory DESCRIPTION "Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'." ::= { adslLineConfProfileEntry 22 } adslAturConfMinUpshiftTime OBJECT-TYPE SYNTAX INTEGER(0..16383) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. In the case that RADSL is not present, the value will be `0'." ::= { adslLineConfProfileEntry 23 } adslAturConfMinDownshiftTime OBJECT-TYPE SYNTAX INTEGER(0..16383) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs. In the case that RADSL is not present, the value will be `0'." ::= { adslLineConfProfileEntry 24 } adslAturChanConfFastMinTxRate OBJECT-TYPE SYNTAX INTEGER -- Units -- bps ACCESS read-write STATUS mandatory DESCRIPTION "Configured Minimum Transmit rate for `Fast' channels, in bps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATUR receive rates." ::= { adslLineConfProfileEntry 25 } adslAturChanConfInterleaveMinTxRate OBJECT-TYPE SYNTAX INTEGER -- Units -- bps ACCESS read-write STATUS mandatory DESCRIPTION "Configured Minimum Transmit rate for `Interleave' channels, in bps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATUR receive rates." ::= { adslLineConfProfileEntry 26 } adslAturChanConfFastMaxTxRate OBJECT-TYPE SYNTAX INTEGER -- Units -- bps ACCESS read-write STATUS mandatory DESCRIPTION "Configured Maximum Transmit rate for `Fast' channels, in bps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATUR receive rates." ::= { adslLineConfProfileEntry 27 } adslAturChanConfInterleaveMaxTxRate OBJECT-TYPE SYNTAX INTEGER -- Units -- bps ACCESS read-write STATUS mandatory DESCRIPTION "Configured Maximum Transmit rate for `Interleave' channels, in bps. See adslAturConfRateChanRatio for information regarding RADSL mode and see ATUC transmit rate for ATUR receive rates." ::= { adslLineConfProfileEntry 28 } adslAturChanConfMaxInterleaveDelay OBJECT-TYPE SYNTAX INTEGER(0..255) -- Units -- milli-seconds ACCESS read-write STATUS mandatory DESCRIPTION "Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency." ::= { adslLineConfProfileEntry 29 } adslLineConfProfileRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service, (by setting this object to `destroy' or `outOfService') it must be first unreferenced from all associated lines. If the implementator of this MIB has chosen not to implement `dynamic assignment' of profiles, this object's MIN-ACCESS is read-only and its value is always to be `active'." ::= { adslLineConfProfileEntry 30 } adslLineAlarmConfProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslLineAlarmConfProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the modem for a physical line" ::= { adslMibObjects 15 } adslLineAlarmConfProfileEntry OBJECT-TYPE SYNTAX AdslLineAlarmConfProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry consists of a list of parameters that represents the configuration of an ADSL modem. When `dynamic' profiles are implemented, a profile is created in one step with all necessary parameter values and adslLineProfileRowStatus set to createAndGo. This RowStatus object is also used to destroy profiles. Also when `dynamic' profiles are implemented, a default profile will always exist. This profile's name will be set to `DEFVAL' and its parameters will be set to vendor specific values, unless otherwise specified in this document. When `static' profiles are implemented, profiles are automically created or destroyed as ADSL physical lines are discovered and removed by the system. The name of the profile will be equivalent to the decimal value of the line's interface index." INDEX { --?? IMPLIED may cause problems IMPLIED adslLineAlarmConfProfileName } ::= { adslLineAlarmConfProfileTable 1 } AdslLineAlarmConfProfileEntry ::= SEQUENCE { adslLineAlarmConfProfileName AdslLineProfileName, adslAtucThresh15MinLofs INTEGER, adslAtucThresh15MinLoss INTEGER, adslAtucThresh15MinLols INTEGER, adslAtucThresh15MinLprs INTEGER, adslAtucThresh15MinESs INTEGER, adslAtucThreshFastRateUp INTEGER, adslAtucThreshInterleaveRateUp INTEGER, adslAtucThreshFastRateDown INTEGER, adslAtucThreshInterleaveRateDown INTEGER, adslAtucInitFailureTrapEnable INTEGER, adslAturThresh15MinLofs INTEGER, adslAturThresh15MinLoss INTEGER, adslAturThresh15MinLprs INTEGER, adslAturThresh15MinESs INTEGER, adslAturThreshFastRateUp INTEGER, adslAturThreshInterleaveRateUp INTEGER, adslAturThreshFastRateDown INTEGER, adslAturThreshInterleaveRateDown INTEGER, adslLineAlarmConfProfileRowStatus RowStatus } adslLineAlarmConfProfileName OBJECT-TYPE SYNTAX AdslLineProfileName -- Rsyntax OCTET STRING(SIZE(1..32)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This object is used by the line alarm configuration table in order to identify a row of this table. When `dynamic' profiles are implemented, the profile name is user specified. Also, the system will always provide a default profile whose name is `DEFVAL'. When `static' profiles are implemented, there is an one-to-one relationship between each line and its profile. In which case, the profile name will need to algorithmicly represent the Line's ifIndex. Therefore, the profile's name is a decimalized string of the ifIndex that is fixed-length (i.e., 10) with leading zero(s). For example, the profile name for ifIndex which equals '15' will be '0000000015'." ::= { adslLineAlarmConfProfileEntry 1 } adslAtucThresh15MinLofs OBJECT-TYPE SYNTAX INTEGER(0..900) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "The number of Loss of Frame Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLofsThreshTrap. Limit of one trap will be sent for any one interval. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileEntry 2 } adslAtucThresh15MinLoss OBJECT-TYPE SYNTAX INTEGER(0..900) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "The number of Loss of Signal Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLossThreshTrap. Limit of one trap will be sent for any one interval. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileEntry 3 } adslAtucThresh15MinLols OBJECT-TYPE SYNTAX INTEGER(0..900) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "The number of Loss of Link Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLolsThreshTrap. Limit of one trap will be sent for any one interval. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileEntry 4 } adslAtucThresh15MinLprs OBJECT-TYPE SYNTAX INTEGER(0..900) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "The number of Loss of Power Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLprsThreshTrap. Limit of one trap will be sent for any one interval. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileEntry 5 } adslAtucThresh15MinESs OBJECT-TYPE SYNTAX INTEGER(0..900) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfESsThreshTrap. Limit of one trap will be sent for any one interval. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileEntry 6 } adslAtucThreshFastRateUp OBJECT-TYPE SYNTAX INTEGER -- Units -- bps ACCESS read-write STATUS mandatory DESCRIPTION "Applies to `Fast' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. Set to `0' to disable." ::= { adslLineAlarmConfProfileEntry 7 } adslAtucThreshInterleaveRateUp OBJECT-TYPE SYNTAX INTEGER -- Units -- bps ACCESS read-write STATUS mandatory DESCRIPTION "Applies to `Interleave' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. Set to `0' to disable." ::= { adslLineAlarmConfProfileEntry 8 } adslAtucThreshFastRateDown OBJECT-TYPE SYNTAX INTEGER -- Units -- bps ACCESS read-write STATUS mandatory DESCRIPTION "Applies to `Fast' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. Set to `0' to disable." ::= { adslLineAlarmConfProfileEntry 9 } adslAtucThreshInterleaveRateDown OBJECT-TYPE SYNTAX INTEGER -- Units -- bps ACCESS read-write STATUS mandatory DESCRIPTION "Applies to `Interleave' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. Set to `0' to disable." ::= { adslLineAlarmConfProfileEntry 10 } adslAtucInitFailureTrapEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables and disables the InitFailureTrap. This object is defaulted disable(2)." DEFVAL { disable } ::= { adslLineAlarmConfProfileEntry 11 } adslAturThresh15MinLofs OBJECT-TYPE SYNTAX INTEGER(0..900) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "The number of Loss of Frame Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLofsThreshTrap. Limit of one trap will be sent for any one interval. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileEntry 12 } adslAturThresh15MinLoss OBJECT-TYPE SYNTAX INTEGER(0..900) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "The number of Loss of Signal Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLossThreshTrap. Limit of one trap will be sent for any one interval. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileEntry 13 } adslAturThresh15MinLprs OBJECT-TYPE SYNTAX INTEGER(0..900) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "The number of Loss of Power Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLprsThreshTrap. Limit of one trap will be sent for any one interval. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileEntry 14 } adslAturThresh15MinESs OBJECT-TYPE SYNTAX INTEGER(0..900) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfESsThreshTrap. Limit of one trap will be sent for any one interval. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileEntry 15 } adslAturThreshFastRateUp OBJECT-TYPE SYNTAX INTEGER -- Units -- bps ACCESS read-write STATUS mandatory DESCRIPTION "Applies to `Fast' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. Set to `0' to disable." ::= { adslLineAlarmConfProfileEntry 16 } adslAturThreshInterleaveRateUp OBJECT-TYPE SYNTAX INTEGER -- Units -- bps ACCESS read-write STATUS mandatory DESCRIPTION "Applies to `Interleave' channels only. configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. Set to `0' to disable." ::= { adslLineAlarmConfProfileEntry 17 } adslAturThreshFastRateDown OBJECT-TYPE SYNTAX INTEGER -- Units -- bps ACCESS read-write STATUS mandatory DESCRIPTION "Applies to `Fast' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. Set to `0' to disable." ::= { adslLineAlarmConfProfileEntry 18 } adslAturThreshInterleaveRateDown OBJECT-TYPE SYNTAX INTEGER -- Units -- bps ACCESS read-write STATUS mandatory DESCRIPTION "Applies to `Interleave' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. Set to `0' to disable." ::= { adslLineAlarmConfProfileEntry 19 } adslLineAlarmConfProfileRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service, (by setting this object to `destroy' or `outOfService') it must be first unreferenced from all associated lines. If the implementator of this MIB has chosen not to implement `dynamic assignment' of profiles, this object's MIN-ACCESS is read-only and its value is always to be `active'." ::= { adslLineAlarmConfProfileEntry 20 } adslAtucPerfLofsThreshTrap TRAP-TYPE -- Reverse mappable trap ENTERPRISE adslAtucTraps VARIABLES { adslAtucThresh15MinLofs } -- Status -- mandatory DESCRIPTION "Loss of Framing 15-minute interval threshold reached." ::= 1 adslAtucPerfLossThreshTrap TRAP-TYPE -- Reverse mappable trap ENTERPRISE adslAtucTraps VARIABLES { adslAtucThresh15MinLoss } -- Status -- mandatory DESCRIPTION "Loss of Signal 15-minute interval threshold reached." ::= 2 adslAtucPerfLprsThreshTrap TRAP-TYPE -- Reverse mappable trap ENTERPRISE adslAtucTraps VARIABLES { adslAtucThresh15MinLprs } -- Status -- mandatory DESCRIPTION "Loss of Power 15-minute interval threshold reached." ::= 3 adslAtucPerfESsThreshTrap TRAP-TYPE -- Reverse mappable trap ENTERPRISE adslAtucTraps VARIABLES { adslAtucThresh15MinESs } -- Status -- mandatory DESCRIPTION "Errored Second 15-minute interval threshold reached." ::= 4 adslAtucRateChangeTrap TRAP-TYPE -- Reverse mappable trap ENTERPRISE adslAtucTraps VARIABLES { adslAtucChanCurrTxRate, adslAtucChanPrevTxRate } -- Status -- mandatory DESCRIPTION "The ATUCs transmit rate has changed (RADSL mode only)" ::= 5 adslAtucPerfLolsThreshTrap TRAP-TYPE -- Reverse mappable trap ENTERPRISE adslAtucTraps VARIABLES { adslAtucThresh15MinLols } -- Status -- mandatory DESCRIPTION "Loss of Link 15-minute interval threshold reached." ::= 6 adslAtucInitFailureTrap TRAP-TYPE -- Reverse mappable trap ENTERPRISE adslAtucTraps VARIABLES { adslAtucCurrStatus } -- Status -- mandatory DESCRIPTION "ATUC initialization failed. See adslAtucCurrStatus for potential reasons." ::= 7 adslAturPerfLofsThreshTrap TRAP-TYPE -- Reverse mappable trap ENTERPRISE adslAturTraps VARIABLES { adslAturThresh15MinLofs } -- Status -- mandatory DESCRIPTION "Loss of Framing 15-minute interval threshold reached." ::= 1 adslAturPerfLossThreshTrap TRAP-TYPE -- Reverse mappable trap ENTERPRISE adslAturTraps VARIABLES { adslAturThresh15MinLoss } -- Status -- mandatory DESCRIPTION "Loss of Signal 15-minute interval threshold reached." ::= 2 adslAturPerfLprsThreshTrap TRAP-TYPE -- Reverse mappable trap ENTERPRISE adslAturTraps VARIABLES { adslAturThresh15MinLprs } -- Status -- mandatory DESCRIPTION "Loss of Power 15-minute interval threshold reached." ::= 3 adslAturPerfESsThreshTrap TRAP-TYPE -- Reverse mappable trap ENTERPRISE adslAturTraps VARIABLES { adslAturThresh15MinESs } -- Status -- mandatory DESCRIPTION "Errored Second 15-minute interval threshold reached." ::= 4 adslAturRateChangeTrap TRAP-TYPE -- Reverse mappable trap ENTERPRISE adslAturTraps VARIABLES { adslAturChanCurrTxRate, adslAturChanPrevTxRate } -- Status -- mandatory DESCRIPTION "The ATURs transmit rate has changed (RADSL mode only)" ::= 5 adslLineGroup OBJECT IDENTIFIER ::= { adslGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing configuration -- information about an ADSL Line. -- objects -- adslLineCoding, adslLineType, adslLineSpecific adslPhysicalGroup OBJECT IDENTIFIER ::= { adslGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing physical -- configuration information of the ADSL Line. -- objects -- adslAtucInvSerialNumber, adslAtucInvVendorID, -- adslAtucInvVersionNumber, adslAtucCurrSnrMgn, adslAtucCurrAtn, -- adslAtucCurrStatus, adslAtucCurrOutputPwr, -- adslAtucCurrAttainableRate, adslAturInvSerialNumber, -- adslAturInvVendorID, adslAturInvVersionNumber, -- adslAturCurrSnrMgn, adslAturCurrAtn, adslAturCurrStatus, -- adslAturCurrOutputPwr, adslAturCurrAttainableRate adslChannelGroup OBJECT IDENTIFIER ::= { adslGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing configuration -- information about an ADSL channel. -- objects -- adslAtucChanInterleaveDelay, adslAtucChanCurrTxRate, -- adslAtucChanPrevTxRate, adslAtucChanCrcBlockLength, -- adslAturChanInterleaveDelay, adslAturChanCurrTxRate, -- adslAturChanPrevTxRate, adslAturChanCrcBlockLength adslAtucPhysPerfRawCounterGroup OBJECT IDENTIFIER ::= { adslGroups 4 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing raw performance -- counts on an ADSL Line (ATU-C end). -- objects -- adslAtucPerfLofs, adslAtucPerfLoss, adslAtucPerfLols, -- adslAtucPerfLprs, adslAtucPerfESs, adslAtucPerfInits adslAtucPhysPerfIntervalGroup OBJECT IDENTIFIER ::= { adslGroups 5 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing current 15-minute, -- 1-day; and previous 1-day performance counts on -- ADSL Line (ATU-C end) . -- objects -- adslAtucPerfValidIntervals, adslAtucPerfInvalidIntervals, -- adslAtucPerfCurr15MinTimeElapsed, adslAtucPerfCurr15MinLofs, -- adslAtucPerfCurr15MinLoss, adslAtucPerfCurr15MinLols, -- adslAtucPerfCurr15MinLprs, adslAtucPerfCurr15MinESs, -- adslAtucPerfCurr15MinInits, adslAtucPerfCurr1DayLofs, -- adslAtucPerfCurr1DayLoss, adslAtucPerfCurr1DayLols, -- adslAtucPerfCurr1DayLprs, adslAtucPerfCurr1DayESs, -- adslAtucPerfCurr1DayInits, adslAtucPerfPrev1DayMoniSecs, -- adslAtucPerfPrev1DayLofs, adslAtucPerfPrev1DayLoss, -- adslAtucPerfPrev1DayLols, adslAtucPerfPrev1DayLprs, -- adslAtucPerfPrev1DayESs, adslAtucPerfPrev1DayInits, -- adslAtucIntervalLofs, adslAtucIntervalLoss, -- adslAtucIntervalLols, adslAtucIntervalLprs, -- adslAtucIntervalESs, adslAtucIntervalInits, -- adslAtucIntervalValidData adslAturPhysPerfRawCounterGroup OBJECT IDENTIFIER ::= { adslGroups 6 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing raw performance -- counts on an ADSL Line (ATU-R end). -- objects -- adslAturPerfLofs, adslAturPerfLoss, adslAturPerfLprs, -- adslAturPerfESs adslAturPhysPerfIntervalGroup OBJECT IDENTIFIER ::= { adslGroups 7 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing current 15-minute, -- 1-day; and previous 1-day performance counts on -- ADSL Line (ATU-R end). -- objects -- adslAturPerfValidIntervals, adslAturPerfInvalidIntervals, -- adslAturPerfCurr15MinTimeElapsed, adslAturPerfCurr15MinLofs, -- adslAturPerfCurr15MinLoss, adslAturPerfCurr15MinLprs, -- adslAturPerfCurr15MinESs, adslAturPerfCurr1DayTimeElapsed, -- adslAturPerfCurr1DayLofs, adslAturPerfCurr1DayLoss, -- adslAturPerfCurr1DayLprs, adslAturPerfCurr1DayESs, -- adslAturPerfPrev1DayMoniSecs, adslAturPerfPrev1DayLofs, -- adslAturPerfPrev1DayLoss, adslAturPerfPrev1DayLprs, -- adslAturPerfPrev1DayESs, adslAturIntervalLofs, -- adslAturIntervalLoss, adslAturIntervalLprs, -- adslAturIntervalESs, adslAturIntervalValidData adslAtucChanPerformanceGroup OBJECT IDENTIFIER ::= { adslGroups 8 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing channel block -- performance information on an ADSL channel -- (ATU-C end). -- objects -- adslAtucChanReceivedBlks, adslAtucChanTransmittedBlks, -- adslAtucChanCorrectedBlks, adslAtucChanUncorrectBlks, -- adslAtucChanPerfValidIntervals, -- adslAtucChanPerfInvalidIntervals, -- adslAtucChanPerfCurr15MinTimeElapsed, -- adslAtucChanPerfCurr15MinReceivedBlks, -- adslAtucChanPerfCurr15MinTransmittedBlks, -- adslAtucChanPerfCurr15MinCorrectedBlks, -- adslAtucChanPerfCurr15MinUncorrectBlks, -- adslAtucChanPerfCurr1DayTimeElapsed, -- adslAtucChanPerfCurr1DayReceivedBlks, -- adslAtucChanPerfCurr1DayTransmittedBlks, -- adslAtucChanPerfCurr1DayCorrectedBlks, -- adslAtucChanPerfCurr1DayUncorrectBlks, -- adslAtucChanPerfPrev1DayMoniSecs, -- adslAtucChanPerfPrev1DayReceivedBlks, -- adslAtucChanPerfPrev1DayTransmittedBlks, -- adslAtucChanPerfPrev1DayCorrectedBlks, -- adslAtucChanPerfPrev1DayUncorrectBlks, -- adslAtucChanIntervalReceivedBlks, -- adslAtucChanIntervalTransmittedBlks, -- adslAtucChanIntervalCorrectedBlks, -- adslAtucChanIntervalUncorrectBlks, -- adslAtucChanIntervalValidData adslAturChanPerformanceGroup OBJECT IDENTIFIER ::= { adslGroups 9 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing channel block -- performance information on an ADSL channel -- (ATU-C end). -- objects -- adslAturChanReceivedBlks, adslAturChanTransmittedBlks, -- adslAturChanCorrectedBlks, adslAturChanUncorrectBlks, -- adslAturChanPerfValidIntervals, -- adslAturChanPerfInvalidIntervals, -- adslAturChanPerfCurr15MinTimeElapsed, -- adslAturChanPerfCurr15MinReceivedBlks, -- adslAturChanPerfCurr15MinTransmittedBlks, -- adslAturChanPerfCurr15MinCorrectedBlks, -- adslAturChanPerfCurr15MinUncorrectBlks, -- adslAturChanPerfCurr1DayTimeElapsed, -- adslAturChanPerfCurr1DayReceivedBlks, -- adslAturChanPerfCurr1DayTransmittedBlks, -- adslAturChanPerfCurr1DayCorrectedBlks, -- adslAturChanPerfCurr1DayUncorrectBlks, -- adslAturChanPerfPrev1DayMoniSecs, -- adslAturChanPerfPrev1DayReceivedBlks, -- adslAturChanPerfPrev1DayTransmittedBlks, -- adslAturChanPerfPrev1DayCorrectedBlks, -- adslAturChanPerfPrev1DayUncorrectBlks, -- adslAturChanIntervalReceivedBlks, -- adslAturChanIntervalTransmittedBlks, -- adslAturChanIntervalCorrectedBlks, -- adslAturChanIntervalUncorrectBlks, -- adslAturChanIntervalValidData adslLineProfileGroup OBJECT IDENTIFIER ::= { adslGroups 10 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing provisioning -- information about an ADSL Line. -- objects -- adslAtucConfRateMode, adslAtucConfRateChanRatio, -- adslAtucConfTargetSnrMgn, adslAtucConfMaxSnrMgn, -- adslAtucConfMinSnrMgn, adslAtucConfDownshiftSnrMgn, -- adslAtucConfUpshiftSnrMgn, adslAtucConfMinUpshiftTime, -- adslAtucConfMinDownshiftTime, adslAtucChanConfFastMinTxRate, -- adslAtucChanConfInterleaveMinTxRate, -- adslAtucChanConfFastMaxTxRate, -- adslAtucChanConfInterleaveMaxTxRate, -- adslAtucChanConfMaxInterleaveDelay, adslAturConfRateMode, -- adslAturConfRateChanRatio, adslAturConfTargetSnrMgn, -- adslAturConfMaxSnrMgn, adslAturConfMinSnrMgn, -- adslAturConfDownshiftSnrMgn, adslAturConfUpshiftSnrMgn, -- adslAturConfMinUpshiftTime, adslAturConfMinDownshiftTime, -- adslAturChanConfFastMinTxRate, -- adslAturChanConfInterleaveMinTxRate, -- adslAturChanConfFastMaxTxRate, -- adslAturChanConfInterleaveMaxTxRate, -- adslAturChanConfMaxInterleaveDelay adslLineAlarmConfProfileGroup OBJECT IDENTIFIER ::= { adslGroups 11 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing alarm provisioning -- information about an ADSL Line. -- objects -- adslAtucThresh15MinLofs, adslAtucThresh15MinLoss, -- adslAtucThresh15MinLols, adslAtucThresh15MinLprs, -- adslAtucThresh15MinESs, adslAtucThreshFastRateUp, -- adslAtucThreshInterleaveRateUp, adslAtucThreshFastRateDown, -- adslAtucThreshInterleaveRateDown, -- adslAtucInitFailureTrapEnable, adslAturThresh15MinLofs, -- adslAturThresh15MinLoss, adslAturThresh15MinLprs, -- adslAturThresh15MinESs, adslAturThreshFastRateUp, -- adslAturThreshInterleaveRateUp, adslAturThreshFastRateDown, -- adslAturThreshInterleaveRateDown adslLineProfileControlGroup OBJECT IDENTIFIER ::= { adslGroups 12 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing profile -- control for the ADSL system. -- objects -- adslLineConfProfile, adslLineAlarmConfProfile, -- adslLineConfProfileRowStatus, -- adslLineAlarmConfProfileRowStatus adslAturLineGroup OBJECT IDENTIFIER ::= { adslGroups 14 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing configuration -- information about an ADSL Line on the ATU-R side. -- objects -- adslLineCoding adslAturPhysicalGroup OBJECT IDENTIFIER ::= { adslGroups 15 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing physical -- configuration information of the ADSL Line on the -- ATU-R side. -- objects -- adslAtucInvVendorID, adslAtucInvVersionNumber, -- adslAtucCurrOutputPwr, adslAtucCurrAttainableRate, -- adslAturInvSerialNumber, adslAturInvVendorID, -- adslAturInvVersionNumber, adslAturCurrSnrMgn, adslAturCurrAtn, -- adslAturCurrStatus, adslAturCurrOutputPwr, -- adslAturCurrAttainableRate adslAturChannelGroup OBJECT IDENTIFIER ::= { adslGroups 16 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing configuration -- information about an ADSL channel on the ATU-R -- side. -- objects -- adslAtucChanInterleaveDelay, adslAtucChanCurrTxRate, -- adslAtucChanPrevTxRate, adslAturChanInterleaveDelay, -- adslAturChanCurrTxRate, adslAturChanPrevTxRate, -- adslAturChanCrcBlockLength adslAturAtucPhysPerfRawCounterGroup OBJECT IDENTIFIER ::= { adslGroups 17 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing raw performance -- counts on an ADSL Line (ATU-C end) provided by the -- ATU-R agent. -- objects -- adslAtucPerfLofs, adslAtucPerfLoss, adslAtucPerfESs, -- adslAtucPerfInits adslAturAtucPhysPerfIntervalGroup OBJECT IDENTIFIER ::= { adslGroups 18 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing current -- 15-minute, 1-day; and previous 1-day performance -- counts on ADSL Line (ATU-C end) provided by the -- ATU-R agent. -- objects -- adslAtucPerfValidIntervals, adslAtucPerfInvalidIntervals, -- adslAtucPerfCurr15MinTimeElapsed, adslAtucPerfCurr15MinLofs, -- adslAtucPerfCurr15MinLoss, adslAtucPerfCurr15MinESs, -- adslAtucPerfCurr15MinInits, adslAtucPerfCurr1DayTimeElapsed, -- adslAtucPerfCurr1DayLofs, adslAtucPerfCurr1DayLoss, -- adslAtucPerfCurr1DayESs, adslAtucPerfCurr1DayInits, -- adslAtucPerfPrev1DayMoniSecs, adslAtucPerfPrev1DayLofs, -- adslAtucPerfPrev1DayLoss, adslAtucPerfPrev1DayESs, -- adslAtucPerfPrev1DayInits, adslAtucIntervalLofs, -- adslAtucIntervalLoss, adslAtucIntervalESs, -- adslAtucIntervalInits, adslAtucIntervalValidData adslAturAturPhysPerfRawCounterGroup OBJECT IDENTIFIER ::= { adslGroups 19 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing raw performance -- counts on an ADSL Line (ATU-R end) provided by the -- ATU-R agent. -- objects -- adslAturPerfLofs, adslAturPerfLoss, adslAturPerfLprs, -- adslAturPerfESs adslAturAturPhysPerfIntervalGroup OBJECT IDENTIFIER ::= { adslGroups 20 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing current -- 15-minute, 1-day; and previous 1-day performance -- counts on ADSL Line (ATU-R end) provided by the -- ATU-R agent. -- objects -- adslAturPerfValidIntervals, adslAturPerfInvalidIntervals, -- adslAturPerfCurr15MinTimeElapsed, adslAturPerfCurr15MinLofs, -- adslAturPerfCurr15MinLoss, adslAturPerfCurr15MinLprs, -- adslAturPerfCurr15MinESs, adslAturPerfCurr1DayTimeElapsed, -- adslAturPerfCurr1DayLofs, adslAturPerfCurr1DayLoss, -- adslAturPerfCurr1DayLprs, adslAturPerfCurr1DayESs, -- adslAturPerfPrev1DayMoniSecs, adslAturPerfPrev1DayLofs, -- adslAturPerfPrev1DayLoss, adslAturPerfPrev1DayLprs, -- adslAturPerfPrev1DayESs, adslAturIntervalLofs, -- adslAturIntervalLoss, adslAturIntervalLprs, -- adslAturIntervalESs, adslAturIntervalValidData adslAturAtucChanPerformanceGroup OBJECT IDENTIFIER ::= { adslGroups 21 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing channel block -- performance information on an ADSL channel -- (ATU-C end) provided by the ATU-R agent. -- objects -- adslAtucChanReceivedBlks, adslAtucChanTransmittedBlks, -- adslAtucChanCorrectedBlks, adslAtucChanUncorrectBlks, -- adslAtucChanPerfCurr15MinTimeElapsed, -- adslAtucChanPerfCurr15MinReceivedBlks, -- adslAtucChanPerfCurr15MinTransmittedBlks, -- adslAtucChanPerfCurr15MinCorrectedBlks, -- adslAtucChanPerfCurr15MinUncorrectBlks, -- adslAtucChanPerfCurr1DayTimeElapsed, -- adslAtucChanPerfCurr1DayReceivedBlks, -- adslAtucChanPerfCurr1DayTransmittedBlks, -- adslAtucChanPerfCurr1DayCorrectedBlks, -- adslAtucChanPerfCurr1DayUncorrectBlks, -- adslAtucChanPerfPrev1DayMoniSecs, -- adslAtucChanPerfPrev1DayReceivedBlks, -- adslAtucChanPerfPrev1DayTransmittedBlks, -- adslAtucChanPerfPrev1DayCorrectedBlks, -- adslAtucChanPerfPrev1DayUncorrectBlks, -- adslAtucChanPerfValidIntervals, -- adslAtucChanPerfInvalidIntervals, -- adslAtucChanIntervalReceivedBlks, -- adslAtucChanIntervalTransmittedBlks, -- adslAtucChanIntervalCorrectedBlks, -- adslAtucChanIntervalUncorrectBlks, -- adslAtucChanIntervalValidData adslAturAturChanPerformanceGroup OBJECT IDENTIFIER ::= { adslGroups 22 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing channel block -- performance information on an ADSL channel -- (ATU-R end) provided by the ATU-R agent. -- objects -- adslAturChanReceivedBlks, adslAturChanTransmittedBlks, -- adslAturChanCorrectedBlks, adslAturChanUncorrectBlks, -- adslAturChanPerfValidIntervals, -- adslAturChanPerfInvalidIntervals, -- adslAturChanPerfCurr15MinTimeElapsed, -- adslAturChanPerfCurr15MinReceivedBlks, -- adslAturChanPerfCurr15MinTransmittedBlks, -- adslAturChanPerfCurr15MinCorrectedBlks, -- adslAturChanPerfCurr15MinUncorrectBlks, -- adslAturChanPerfCurr1DayTimeElapsed, -- adslAturChanPerfCurr1DayReceivedBlks, -- adslAturChanPerfCurr1DayTransmittedBlks, -- adslAturChanPerfCurr1DayCorrectedBlks, -- adslAturChanPerfCurr1DayUncorrectBlks, -- adslAturChanPerfPrev1DayMoniSecs, -- adslAturChanPerfPrev1DayReceivedBlks, -- adslAturChanPerfPrev1DayTransmittedBlks, -- adslAturChanPerfPrev1DayCorrectedBlks, -- adslAturChanPerfPrev1DayUncorrectBlks, -- adslAturChanIntervalReceivedBlks, -- adslAturChanIntervalTransmittedBlks, -- adslAturChanIntervalCorrectedBlks, -- adslAturChanIntervalUncorrectBlks, -- adslAturChanIntervalValidData adslAturLineProfileGroup OBJECT IDENTIFIER ::= { adslGroups 23 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing provisioning -- information about an ADSL Line by the ATU-R agent. -- objects -- adslAturConfRateMode, adslAturConfRateChanRatio, -- adslAturConfTargetSnrMgn, adslAturConfMaxSnrMgn, -- adslAturConfMinSnrMgn, adslAturConfDownshiftSnrMgn, -- adslAturConfUpshiftSnrMgn, adslAturConfMinUpshiftTime, -- adslAturConfMinDownshiftTime, adslAturChanConfFastMinTxRate, -- adslAturChanConfInterleaveMinTxRate, -- adslAturChanConfFastMaxTxRate, -- adslAturChanConfInterleaveMaxTxRate, -- adslAturChanConfMaxInterleaveDelay adslAturLineAlarmConfProfileGroup OBJECT IDENTIFIER ::= { adslGroups 24 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing alarm provisioning -- information about an ADSL Line provided by the -- ATU-R agent. -- objects -- adslAtucThresh15MinLofs, adslAtucThresh15MinLoss, -- adslAtucThresh15MinESs, adslAtucThreshFastRateUp, -- adslAtucThreshInterleaveRateUp, adslAtucThreshFastRateDown, -- adslAtucThreshInterleaveRateDown, -- adslAtucInitFailureTrapEnable, adslAturThresh15MinLofs, -- adslAturThresh15MinLoss, adslAturThresh15MinLprs, -- adslAturThresh15MinESs, adslAturThreshFastRateUp, -- adslAturThreshInterleaveRateUp, adslAturThreshFastRateDown, -- adslAturThreshInterleaveRateDown adslAturLineProfileControlGroup OBJECT IDENTIFIER ::= { adslGroups 25 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing profile -- control for the ADSL system by the ATU-R agent. -- objects -- adslLineAlarmConfProfile, adslLineAlarmConfProfileRowStatus adslLineMibCompliance OBJECT IDENTIFIER ::= { adslCompliances 1 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for SNMP entities -- which have ADSL interfaces. -- Module -- >>current<< -- MandGroup -- adslLineGroup -- MandGroup -- adslPhysicalGroup -- MandGroup -- adslChannelGroup -- MandGroup -- adslAtucPhysPerfIntervalGroup -- MandGroup -- adslAturPhysPerfIntervalGroup -- MandGroup -- adslLineProfileGroup -- MandGroup -- adslLineAlarmConfProfileGroup -- MandGroup -- adslLineProfileControlGroup -- OptGroup -- adslAtucPhysPerfRawCounterGroup -- OptGroup -- adslAturPhysPerfRawCounterGroup -- OptGroup -- adslAtucChanPerformanceGroup -- OptGroup -- adslAturChanPerformanceGroup -- ObjVar -- adslLineConfProfile -- ObjVar -- adslLineConfProfileRowStatus -- ObjVar -- adslLineAlarmConfProfile -- ObjVar -- adslLineAlarmConfProfileRowStatus adslLineMibAturCompliance OBJECT IDENTIFIER ::= { adslCompliances 2 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for SNMP entities -- which manage ADSL ATU-R interfaces. -- Module -- >>current<< -- MandGroup -- adslAturLineGroup -- MandGroup -- adslAturPhysicalGroup -- MandGroup -- adslAturChannelGroup -- MandGroup -- adslAturAtucPhysPerfIntervalGroup -- MandGroup -- adslAturAturPhysPerfIntervalGroup -- MandGroup -- adslAturLineProfileGroup -- MandGroup -- adslAturLineAlarmConfProfileGroup -- MandGroup -- adslAturLineProfileControlGroup -- OptGroup -- adslAturAtucPhysPerfRawCounterGroup -- OptGroup -- adslAturAturPhysPerfRawCounterGroup -- OptGroup -- adslAturAtucChanPerformanceGroup -- OptGroup -- adslAturAturChanPerformanceGroup END