-- MIB created 6/25/99 12:56:36, by
--   SMIC (the next generation) version 1.6.29, November 22, 1994.

APPN-DLUR-MIB DEFINITIONS ::= BEGIN

-- From file: "APPN-DLUR-MIB.my"

IMPORTS
    enterprises
            FROM RFC1155-SMI
    DisplayString
            FROM RFC1213-MIB
    OBJECT-TYPE
            FROM RFC-1212;

ibm             OBJECT IDENTIFIER ::= { enterprises 2 }
ibmArchitecture OBJECT IDENTIFIER ::= { ibm 5 }
appnDlur        OBJECT IDENTIFIER ::= { ibmArchitecture 12 }
dlurNodeCapabilities OBJECT IDENTIFIER ::= { appnDlur 1 }
dlurPuInfo      OBJECT IDENTIFIER ::= { appnDlur 2 }
dlurDlusInfo    OBJECT IDENTIFIER ::= { appnDlur 3 }

dlurReleaseLevel OBJECT-TYPE
    SYNTAX DisplayString(SIZE(2))
--    Rsyntax OCTET STRING(SIZE(2))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The DLUR release level of this implementation.  This is the
        value that is encoded in the DLUR/DLUS Capabilities (CV51).
        To insure consistent display, this one-byte value is encoded
        here as two displayable characters that are equivalent to a 
        hexidecimal display.  For example, if the one-byte value as 
        encoded in CV51 is X' 1', this object will contain the 
        displayable string ' 1'."
    ::= { dlurNodeCapabilities 1 }

dlurANSsupport OBJECT-TYPE
    SYNTAX INTEGER {
        continueOrStop(1),
        stopOnly(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Automatic Network Shutdown capability of this node.
           
        'continueOrStop' indicates that the DLUR implementation
        supports either ANS value (continue or stop) as specified by the 
        SLU on ACTPU value of stop.
        
        'stopOnly' indicates that the DLUR implementation only
        supports the AND value of stop.
        
        ANS = continue means that the DLUR node will keep LU-LU sessions
        active even is the SSCP-PU and SSCP-LU control sessions are interrupted.
        
        ANS = stop means that LU-LU sessions will be interrupted when the 
         SSCP-PU and SSCP-LU sessions are interrupted."
    ::= { dlurNodeCapabilities 2 }

dlurMultiSubnetSupport OBJECT-TYPE
    SYNTAX INTEGER {
        yes(1),
        no(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Capability of this implementation to support CP-SVR sessions 
        that cross NETID boundaries.
        
        'yes' means that these sessions can cross NETID boundaries.
        
        'no' means that these sessions cannot cross NETID boundaries."
    ::= { dlurNodeCapabilities 3 }

dlurPuTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DlurPuEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "DLUr-unique information about supported PUs."
    ::= { dlurPuInfo 1 }

dlurPuEntry OBJECT-TYPE
    SYNTAX DlurPuEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Entry in table of DLUR-unique information about PUs."
    INDEX { dlurPuIndex }
    ::= { dlurPuTable 1 }

DlurPuEntry ::= SEQUENCE {
    dlurPuIndex INTEGER,
    dlurPuName DisplayString,
    dlurPuStatus INTEGER,
    dlurPuANSsupport INTEGER,
    dlurPuLocation INTEGER,
    dlurPuDlusSessnStatus INTEGER,
    dlurPuActiveDlusName DisplayString,
    dlurPuDefPrimDlusName DisplayString,
    dlurPuDefBackDlusName DisplayString
    }

dlurPuIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object has the same value as snaNodeAdminIndex
        in the snaNodeAdminEntry and snaNodeOperEntry entries of the 
        IETF SNA NAU MIB that provide information about the same PU."
    ::= { dlurPuEntry 1 }

dlurPuName OBJECT-TYPE
    SYNTAX DisplayString(SIZE(1..17))
--    Rsyntax OCTET STRING(SIZE(1..17))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The SNA name of the PU.  This value is expressed as
        NETID.PUNAME, including the perios (.).  If the NETID is
        not known, the PU name alone is provided.  A null string
        indicates that the value is unavailable."
    ::= { dlurPuEntry 2 }

dlurPuStatus OBJECT-TYPE
    SYNTAX INTEGER {
        reset(1),
        pendReqActRsp(2),
        pendActpu(3),
        pendActpuRsp(4),
        active(5),
        pendLinkact(6),
        pendDactpuRsp(7),
        pendInop(8),
        pendInopActpu(9)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Status of the DLUR-supported PU.
        This is a more detailed enumeration os the state of the PU
        than is found in the ANU MB."
    ::= { dlurPuEntry 3 }

dlurPuANSsupport OBJECT-TYPE
    SYNTAX INTEGER {
        continue(1),
        stop(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The Automatic Network Shutdown (AND) support configured for this
        PU.  This value (as configured by the network administrator) is
        sent by the DLUS with ACTPU for each PU.
        
        'continue' means that the DLUR node will attempt to keep LU-LU
        sessions active even is the SSCP-PU and SSCP-LU control sessions
        are interrupted.
        
        'stop' means that LU-LU sessions will be interrupted when the
        SSCP-PU and SSCP-LU sessions are interrupted."
    ::= { dlurPuEntry 4 }

dlurPuLocation OBJECT-TYPE
    SYNTAX INTEGER {
        internal(1),
        downstream(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Location of the DLUR-supported PU.  Either internal to the APPN
        node itself (no link)_ or downstream of the APPN node
        (connected via a link)."
    ::= { dlurPuEntry 5 }

dlurPuDlusSessnStatus OBJECT-TYPE
    SYNTAX INTEGER {
        reset(1),
        pendingActive(2),
        active(3),
        pendingInactive(4)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Status of the control session to the DLUS identified in
        dlurPuActiveDlusName.  This is a combination os 
        the separate states for the conwinner and conloser sessions."
    ::= { dlurPuEntry 6 }

dlurPuActiveDlusName OBJECT-TYPE
    SYNTAX DisplayString(SIZE(0..17))
--    Rsyntax OCTET STRING(SIZE(0..17))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The SNA name of the active DLUS.  This value is expressed as
        NETID.CPNAME, including the periois (.).  A null string
        indicates that the value is unavailable."
    ::= { dlurPuEntry 7 }

dlurPuDefPrimDlusName OBJECT-TYPE
    SYNTAX DisplayString(SIZE(0..17))
--    Rsyntax OCTET STRING(SIZE(0..17))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The SNA name os the defined primary DLUS for this PU.
        Expressed as NETID.CPNAME, including the period (.).
        A null string indicates that he value is unavailable."
    ::= { dlurPuEntry 8 }

dlurPuDefBackDlusName OBJECT-TYPE
    SYNTAX DisplayString(SIZE(0..17))
--    Rsyntax OCTET STRING(SIZE(0..17))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The SNA name of the defined backup DLUR for this PU.
        Expressed as NETID.CPNAME, including the period (.).
        A null string indicates that the value is unavailable."
    ::= { dlurPuEntry 9 }

dlurDlusTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DlurDlusEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Information about DLUS control sessions."
    ::= { dlurDlusInfo 1 }

dlurDlusEntry OBJECT-TYPE
    SYNTAX DlurDlusEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Entry in table of information about DLUS control sessions."
    INDEX { dlurDlusIndex }
    ::= { dlurDlusTable 1 }

DlurDlusEntry ::= SEQUENCE {
    dlurDlusIndex INTEGER,
    dlurDlusName DisplayString,
    dlurDlusSessnStatus INTEGER
    }

dlurDlusIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Index to the table."
    ::= { dlurDlusEntry 1 }

dlurDlusName OBJECT-TYPE
    SYNTAX DisplayString(SIZE(0..17))
--    Rsyntax OCTET STRING(SIZE(0..17))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The SNA name of the DLUS.  This value is expressed as
        NETID.CPNAME, including the period (.).  A null string
        indicates that the value is unavailable."
    ::= { dlurDlusEntry 2 }

dlurDlusSessnStatus OBJECT-TYPE
    SYNTAX INTEGER {
        reset(1),
        pendingActive(2),
        active(3),
        pendingInactive(4)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Status of the session with the DLUS.  This is the combination os
        the separate states for the conwinner and conloser sessions."
    ::= { dlurDlusEntry 3 }


END