-- MIB file created 15-Mar-2001 10:53:56, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com APPN-MIB DEFINITIONS ::= BEGIN -- From file: "APPN-MIB.my" -- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T" IMPORTS IANAifType FROM IANAifType-MIB DisplayString, VariablePointer, RowPointer, DateAndTime, TruthValue, TimeStamp FROM SNMPv2-TC-v1 snanauMIB FROM SNA-NAU-MIB Counter, Gauge, TimeTicks FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; appnMIB OBJECT IDENTIFIER ::= { snanauMIB 4 } -- MODULE-IDENTITY -- LastUpdated -- 9807151800Z -- OrgName -- IETF SNA NAU MIB WG / AIW APPN MIBs SIG -- ContactInfo -- -- -- Bob Clouston -- Cisco Systems -- 7025 Kit Creek Road -- P.O. Box 14987 -- Research Triangle Park, NC 27709, USA -- Tel: 1 919 472 2333 -- E-mail: clouston@cisco.com -- -- Bob Moore -- IBM Corporation -- 4205 S. Miami Boulevard -- BRQA/501 -- P.O. Box 12195 -- Research Triangle Park, NC 27709, USA -- Tel: 1 919 254 4436 -- E-mail: remoore@us.ibm.com -- Descr -- This is the MIB module for objects used to -- manage network devices with APPN capabilities. -- RevDate -- 9807151800Z -- RevDescr -- Minor editorial fixes; new value 'none(5)' added -- to the enumeration for the appnLocalTgBranchLinkType -- object. -- RevDate -- 9805261800Z -- RevDescr -- Post-RFC 2155 conformance definitions added, -- appnNodeLsCounterType and appnNodeBrNn objects -- added, appnNodeMibVersion object deprecated. -- RevDate -- 9707311800Z -- RevDescr -- Branch network node (Branch Extender) objects added. -- RevDate -- 9703311800Z -- RevDescr -- MLTG objects added. -- RevDate -- 9703201200Z -- RevDescr -- RFC 2155 (Proposed Standard) appnObjects OBJECT IDENTIFIER ::= { appnMIB 1 } appnNode OBJECT IDENTIFIER ::= { appnObjects 1 } appnGeneralInfoAndCaps OBJECT IDENTIFIER ::= { appnNode 1 } appnNnUniqueInfoAndCaps OBJECT IDENTIFIER ::= { appnNode 2 } appnEnUniqueCaps OBJECT IDENTIFIER ::= { appnNode 3 } appnPortInformation OBJECT IDENTIFIER ::= { appnNode 4 } appnLinkStationInformation OBJECT IDENTIFIER ::= { appnNode 5 } appnVrnInfo OBJECT IDENTIFIER ::= { appnNode 6 } appnNn OBJECT IDENTIFIER ::= { appnObjects 2 } appnNnTopo OBJECT IDENTIFIER ::= { appnNn 1 } appnNnTopology OBJECT IDENTIFIER ::= { appnNn 2 } appnLocalTopology OBJECT IDENTIFIER ::= { appnObjects 3 } appnDir OBJECT IDENTIFIER ::= { appnObjects 4 } appnDirPerf OBJECT IDENTIFIER ::= { appnDir 1 } appnCos OBJECT IDENTIFIER ::= { appnObjects 5 } appnSessIntermediate OBJECT IDENTIFIER ::= { appnObjects 6 } appnIsInGlobal OBJECT IDENTIFIER ::= { appnSessIntermediate 1 } appnTraps OBJECT IDENTIFIER ::= { appnMIB 2 } appnConformance OBJECT IDENTIFIER ::= { appnMIB 3 } appnCompliances OBJECT IDENTIFIER ::= { appnConformance 1 } appnGroups OBJECT IDENTIFIER ::= { appnConformance 2 } SnaNodeIdentification ::= OCTET STRING(SIZE(8)) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- An SNA Node Identification consists of two parts, which -- together comprise four bytes of hexadecimal data. In SNA the -- Node Identification is transported in bytes 2-5 of the XID. -- -- The block number is the first three digits of the Node -- Identification. These 3 hexadecimal digits identify the -- product. -- -- The ID number is the last 5 digits of the Node Identification. -- These 5 hexadecimal digits are administratively defined and -- combined with the 3-digit block number form the 8-digit Node -- Identification. A unique value is required for connections to -- SNA subarea. In some implementations, the value 'bbb00000' -- (where 'bbb' represents a 3-digit block number) is returned to -- mean that the ID number is not unique on this node. -- -- An SNA Node Identification is represented as eight -- ASCII-encoded hexadecimal digits, using the characters '0' - -- '9' and 'A' - 'F'. SnaControlPointName ::= OCTET STRING(SIZE(3..17)) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- A fully qualified SNA control point name, consisting of a 1 to -- 8 character network identifier (NetId), a period ('.'), and a 1 -- to 8 character control point name (CpName). -- -- The NetId and CpName are constructed from the uppercase letters -- 'A' - 'Z' and the numerics '0' - '9', all encoded in ASCII, -- with the restriction that the first character of each must be -- a letter. Trailing blanks are not allowed. -- -- Earlier versions of SNA permitted three additional characters -- in NetIds and CpNames: '#', '@', and '$'. While this use of -- these characters has been retired, a Management Station should -- still accept them for backward compatibility. SnaClassOfServiceName ::= OCTET STRING(SIZE(0..8)) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- An SNA class-of-service (COS) name, ranging from 1 to 8 -- ASCII characters. COS names take one of two forms: -- -- - a user-defined COS name is constructed from the uppercase -- letters 'A' - 'Z' and the numerics '0' - '9', with the -- restriction that the first character of the name must be -- a letter. -- - an SNA-defined user-session COS name begins with the -- character '#', which is followed by up to seven -- additional characters from the set of uppercase letters -- and numerics. -- -- Trailing blanks are not allowed in either form of COS name. -- -- A zero-length string indicates that a COS name is not -- available. SnaModeName ::= OCTET STRING(SIZE(0..8)) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- An SNA mode name, ranging from 1 to 8 ASCII characters. -- Mode names take one of two forms: -- -- - a user-defined mode name is constructed from the -- uppercase letters 'A' - 'Z' and the numerics '0' - '9', -- with the restriction that the first character of the name -- must be a letter. -- - an SNA-defined user-session mode name begins with the -- character '#', which is followed by up to seven -- additional characters from the set of uppercase letters -- and numerics. -- -- Trailing blanks are not allowed in either form of mode name, -- with the single exception of the all-blank mode name, where -- a string consisting of 8 blanks is returned. -- -- A zero-length string indicates that a mode name is not -- available. SnaSenseData ::= OCTET STRING(SIZE(8)) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- To facilitate their display by a Management Station, sense -- data objects in the MIB are represented as OCTET STRINGS -- containing eight ASCII characters. Eight '0' characters -- indicates that no sense data identifying an SNA error -- condition is available. -- -- An SNA sense data is represented as eight hexadecimal digits, -- using the characters '0' - '9' and 'A' - 'F'. DisplayableDlcAddress ::= OCTET STRING(SIZE(0..64)) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- DLC address of a port or link station, represented as an -- OCTET STRING containing 0 to 64 ASCII characters. -- A Management Station should use a value of this type only -- for display. The 'real' DLC address, i.e., the sequence of -- bytes that flow in the DLC header, is often available in a -- DLC-specific MIB. -- -- The zero-length string indicates that the DLC address in -- question is not known to the agent. AppnNodeCounter ::= Counter -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- An object providing global statistics for the entire APPN -- node. A Management Station can detect discontinuities in this -- counter by monitoring the appnNodeCounterDisconTime object. AppnPortCounter ::= Counter -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- An object providing statistics for an APPN port. A -- Management Station can detect discontinuities in this counter -- by monitoring the appnPortCounterDisconTime object. AppnLinkStationCounter ::= Counter -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- An object providing statistics for an APPN link station. A -- Management Station can detect discontinuities in this counter -- by monitoring the appnLsCounterDisconTime object. AppnTopologyEntryTimeLeft ::= INTEGER(0..15) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- Number of days before deletion of this entry from the topology -- database. Range is 0-15. A value of 0 indicates that the -- entry is either in the process of being deleted, or is being -- marked for deletion at the next garbage collection cycle. AppnTgDlcData ::= OCTET STRING(SIZE(0..64)) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- DLC-specific data related to a connection network transmission -- group. For other TGs, a zero-length string is returned. -- -- Examples of the type of data returned by an object with this -- syntax include the following: -- -- Token-Ring - MAC/SAP -- X.25 Switched - dial digits -- X.21 Switched - dial digits -- Circuit Switch - dial digits -- -- This MIB does not specify formats for these or any other types -- of DLC-specific data. Formats may, however, be specified in -- documents related to a particular DLC. -- -- The contents of an object with this syntax correspond to the -- contents of the DLC-specific subfields of cv46, documented in -- (6). AppnTgEffectiveCapacity ::= OCTET STRING(SIZE(1)) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- A value representing the effective capacity of a transmission -- group. This is an administratively assigned value derived from -- the link bandwidth and maximum load factor. It is encoded in -- the same way as byte 7 of cv47, and represents a floating-point -- number in units of 300 bits per second. AppnTgSecurity ::= INTEGER { nonsecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- A value representing the level of security on a transmission -- group. A class of service definition includes an indication of -- the acceptable TG security value(s) for that class of service. -- -- The following seven values are defined: -- -- nonsecure(1) - -- (X'01'): none of the values listed below; -- for example, satellite-connected or -- located in a nonsecure country -- publicSwitchedNetwork(32) - -- (X'20'): public switched network; secure -- in the sense that there is no -- predetermined route that traffic will take -- undergroundCable(64) - -- (X'40'): underground cable; located in a -- secure country (as determined by the -- network administrator) -- secureConduit(96) - -- (X'60'): secure conduit, not guarded; for -- example, pressurized pipe -- guardedConduit(128) - -- (X'80'): guarded conduit; protected -- against physical tapping -- encrypted(160) - -- (X'A0'): link-level encryption is provided -- guardedRadiation(192) - -- (X'C0'): guarded conduit containing the -- transmission medium; protected against -- physical and radiation tapping AppnTgDelay ::= OCTET STRING(SIZE(1)) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- Relative amount of time that it takes for a signal to travel -- the length of a logical link. This time is represented in -- microseconds, using the same encoding scheme used in cv47 in a -- topology update. Some of the more common values, along with -- their encoded hex values, are: -- -- minimum(0), X'00' -- negligible(384), X'4C' -- terrestrial(9216), X'71' -- packet(147456), X'91' -- long(294912), X'99' -- maximum(2013265920) X'FF' -- appnNodeCpName OBJECT-TYPE SYNTAX SnaControlPointName -- Rsyntax OCTET STRING(SIZE(3..17)) ACCESS read-only STATUS mandatory DESCRIPTION "Administratively assigned network name for this node." ::= { appnGeneralInfoAndCaps 1 } appnNodeId OBJECT-TYPE SYNTAX SnaNodeIdentification -- Rsyntax OCTET STRING(SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "This node's Node Identification, which it sends in bytes 2-5 of XID." ::= { appnGeneralInfoAndCaps 3 } appnNodeType OBJECT-TYPE SYNTAX INTEGER { networkNode(1), endNode(2), t21len(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of APPN node: networkNode(1) - APPN network node endNode(2) - APPN end node t21len(4) - LEN end node Note: A branch network node SHALL return endNode(2) as the value of this object. A management application can distinguish between a branch network node and an actual end node by retrieving the appnNodeBrNn object." ::= { appnGeneralInfoAndCaps 4 } appnNodeUpTime OBJECT-TYPE SYNTAX TimeTicks -- Units -- hundredths of a second ACCESS read-only STATUS mandatory DESCRIPTION "Amount of time (in hundredths of a second) since the APPN node was last reinitialized." ::= { appnGeneralInfoAndCaps 5 } appnNodeParallelTg OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node supports parallel TGs." ::= { appnGeneralInfoAndCaps 6 } appnNodeAdaptiveBindPacing OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node supports adaptive bind pacing for dependent LUs." ::= { appnGeneralInfoAndCaps 7 } appnNodeHprSupport OBJECT-TYPE SYNTAX INTEGER { noHprSupport(1), hprBaseOnly(2), rtpTower(3), controlFlowsOverRtpTower(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates this node's level of support for high-performance routing (HPR): noHprSupport(1) - no HPR support hprBaseOnly(2) - HPR base (option set 1400) supported rtpTower(3) - HPR base and RTP tower (option set 1401) supported controlFlowsOverRtpTower(4) - HPR base, RTP tower, and control flows over RTP (option set 1402) supported This object corresponds to cv4580, byte 9, bits 3-4." ::= { appnGeneralInfoAndCaps 8 } appnNodeMaxSessPerRtpConn OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This object represents a configuration parameter indicating the maximum number of sessions that the APPN node is to put on any HPR connection. The value is zero if not applicable." ::= { appnGeneralInfoAndCaps 9 } appnNodeHprIntRteSetups OBJECT-TYPE SYNTAX AppnNodeCounter -- Rsyntax Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of HPR route setups received for routes passing through this node since the node was last reinitialized." ::= { appnGeneralInfoAndCaps 10 } appnNodeHprIntRteRejects OBJECT-TYPE SYNTAX AppnNodeCounter -- Rsyntax Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of HPR route setups rejected by this node for routes passing through it since the node was last reinitialized." ::= { appnGeneralInfoAndCaps 11 } appnNodeHprOrgRteSetups OBJECT-TYPE SYNTAX AppnNodeCounter -- Rsyntax Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of HPR route setups sent for routes originating in this node since the node was last reinitialized." ::= { appnGeneralInfoAndCaps 12 } appnNodeHprOrgRteRejects OBJECT-TYPE SYNTAX AppnNodeCounter -- Rsyntax Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of HPR route setups rejected by other nodes for routes originating in this node since the node was last reinitialized." ::= { appnGeneralInfoAndCaps 13 } appnNodeHprEndRteSetups OBJECT-TYPE SYNTAX AppnNodeCounter -- Rsyntax Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of HPR route setups received for routes ending in this node since the node was last reinitialized." ::= { appnGeneralInfoAndCaps 14 } appnNodeHprEndRteRejects OBJECT-TYPE SYNTAX AppnNodeCounter -- Rsyntax Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of HPR route setups rejected by this node for routes ending in it since the node was last reinitialized." ::= { appnGeneralInfoAndCaps 15 } appnNodeCounterDisconTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of the sysUpTime object the last time the APPN node was reinitialized." ::= { appnGeneralInfoAndCaps 16 } appnNodeLsCounterType OBJECT-TYPE SYNTAX INTEGER { other(1), noAnr(2), anrForLocalNces(3), allAnr(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates which ANR traffic, if any, the node includes in the counts returned by the APPN link station counters appnLsInXidBytes, appnLsInMsgBytes, appnLsInXidFrames, appnLsInMsgFrames, appnLsOutXidBytes, appnLsOutMsgBytes, appnLsOutXidFrames, and appnLsOutMsgFrames. These counters are always incremented for ISR traffic. The following values are defined: other(1) - the node does something different from all the options listed below noAnr(2) - the node does not include any ANR traffic in these counts anrForLocalNces(3) - the node includes in these counts ANR traffic for RTP connections that terminate in this node, but not ANR traffic for RTP connections that pass through this node without terminating in it allAnr(4) - the node includes all ANR traffic in these counts." ::= { appnGeneralInfoAndCaps 17 } appnNodeBrNn OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node is currently configured as a branch network node. Note: throughout the remainder of this MIB module, branch network node is treated as a third node type, parallel to network node and end node. This is not how branch network nodes are treated in the base APPN architecture, but it increases clarity to do it here." ::= { appnGeneralInfoAndCaps 18 } appnNodeNnCentralDirectory OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node supports central directory services. This object corresponds to cv4580, byte 8, bit 1." ::= { appnNnUniqueInfoAndCaps 1 } appnNodeNnTreeCache OBJECT-TYPE SYNTAX INTEGER { noCache(1), cacheNoIncrUpdate(2), cacheWithIncrUpdate(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates this node's level of support for caching of route trees. Three levels are specified: noCache(1) - caching of route trees is not supported cacheNoIncrUpdate(2) - caching of route trees is supported, but without incremental updates cacheWithIncrUpdate(3) - caching of route trees with incremental updates is supported" ::= { appnNnUniqueInfoAndCaps 2 } appnNodeNnRouteAddResist OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Route addition resistance. This administratively assigned value indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing. This object corresponds to cv4580, byte 6." ::= { appnNnUniqueInfoAndCaps 3 } appnNodeNnIsr OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node supports intermediate session routing. This object corresponds to cv4580, byte 8, bit 2." ::= { appnNnUniqueInfoAndCaps 4 } appnNodeNnFrsn OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The last flow-reduction sequence number (FRSN) sent by this node in a topology update to an adjacent network node." ::= { appnNnUniqueInfoAndCaps 5 } appnNodeNnPeriBorderSup OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node has peripheral border node support. This object corresponds to cv4580, byte 9, bit 0." ::= { appnNnUniqueInfoAndCaps 6 } appnNodeNnInterchangeSup OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node has interchange node support. This object corresponds to cv4580, byte 9, bit 1." ::= { appnNnUniqueInfoAndCaps 7 } appnNodeNnExteBorderSup OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node has extended border node support. This object corresponds to cv4580, byte 9, bit 2." ::= { appnNnUniqueInfoAndCaps 8 } appnNodeNnSafeStoreFreq OBJECT-TYPE SYNTAX INTEGER(0..32767) -- Units -- TDUs ACCESS read-write STATUS mandatory DESCRIPTION "The topology safe store frequency. If this number is not zero, then the topology database is saved each time the total number of topology database updates (TDUs) received by this node increases by this number. A value of zero indicates that the topology database is not being saved." ::= { appnNnUniqueInfoAndCaps 9 } appnNodeNnRsn OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Resource sequence number for this node, which it assigns and controls. This object corresponds to the numeric value in cv4580, bytes 2-5." ::= { appnNnUniqueInfoAndCaps 10 } appnNodeNnCongested OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node is congested. Other network nodes stop routing traffic to this node while this flag is on. This object corresponds to cv4580, byte 7, bit 0." ::= { appnNnUniqueInfoAndCaps 11 } appnNodeNnIsrDepleted OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicate whether intermediated session routing resources are depleted. Other network nodes stop routing traffic through this node while this flag is on. This object corresponds to cv4580, byte 7, bit 1." ::= { appnNnUniqueInfoAndCaps 12 } appnNodeNnQuiescing OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node is quiescing. This object corresponds to cv4580, byte 7, bit 5." ::= { appnNnUniqueInfoAndCaps 13 } appnNodeNnGateway OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node has gateway services support. This object corresponds to cv4580, byte 8, bit 0." ::= { appnNnUniqueInfoAndCaps 14 } appnNodeEnModeCosMap OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this end node supports mode name to COS name mapping." ::= { appnEnUniqueCaps 1 } appnNodeEnNnServer OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0|3..17)) ACCESS read-only STATUS mandatory DESCRIPTION "The fully qualified name of the current NN server for this end node. An NN server is identified using the format specified in the SnaControlPointName textual convention. The value is a zero-length string when there is no active NN server. A branch network node shall also implement this object." ::= { appnEnUniqueCaps 2 } appnNodeEnLuSearch OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node is to be searched for LUs as part of a network broadcast search. A branch network node shall also implement this object." ::= { appnEnUniqueCaps 3 } appnPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AppnPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Port table describes the configuration and current status of the ports used by APPN. When it is known to the APPN component, an OBJECT IDENTIFIER pointing to additional information related to the port is included. This may, but need not, be a RowPointer to an ifTable entry for a DLC interface immediately 'below' the port." ::= { appnPortInformation 1 } appnPortEntry OBJECT-TYPE SYNTAX AppnPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The port name is used as the index to this table." INDEX { appnPortName } ::= { appnPortTable 1 } AppnPortEntry ::= SEQUENCE { appnPortName DisplayString, appnPortCommand INTEGER, appnPortOperState INTEGER, appnPortDlcType IANAifType, appnPortPortType INTEGER, appnPortSIMRIM TruthValue, appnPortLsRole INTEGER, appnPortNegotLs TruthValue, appnPortDynamicLinkSupport TruthValue, appnPortMaxRcvBtuSize INTEGER, appnPortMaxIframeWindow Gauge, appnPortDefLsGoodXids AppnPortCounter, appnPortDefLsBadXids AppnPortCounter, appnPortDynLsGoodXids AppnPortCounter, appnPortDynLsBadXids AppnPortCounter, appnPortSpecific RowPointer, appnPortDlcLocalAddr DisplayableDlcAddress, appnPortCounterDisconTime TimeStamp } appnPortName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..10)) -- Rsyntax OCTET STRING(SIZE(1..10)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Administratively assigned name for this APPN port." ::= { appnPortEntry 1 } appnPortCommand OBJECT-TYPE SYNTAX INTEGER { deactivate(1), activate(2), recycle(3), ready(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Object by which a Management Station can activate, deactivate, or recycle (i.e., cause to be deactivated and then immediately activated) a port, by setting the value to activate(1), deactivate(2), or recycle(3), respectively. The value ready(4) is returned on GET operations until a SET has been processed; after that the value received on the most recent SET is returned." ::= { appnPortEntry 2 } appnPortOperState OBJECT-TYPE SYNTAX INTEGER { inactive(1), pendactive(2), active(3), pendinact(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current state of this port: inactive(1) - port is inactive pendactive(2) - port is pending active active(3) - port is active pendinact(4) - port is pending inactive" ::= { appnPortEntry 3 } appnPortDlcType OBJECT-TYPE SYNTAX IANAifType -- Rsyntax INTEGER { -- other(1), -- regular1822(2), -- hdh1822(3), -- ddnX25(4), -- rfc877x25(5), -- ethernetCsmacd(6), -- iso88023Csmacd(7), -- iso88024TokenBus(8), -- iso88025TokenRing(9), -- iso88026Man(10), -- starLan(11), -- proteon10Mbit(12), -- proteon80Mbit(13), -- hyperchannel(14), -- fddi(15), -- lapb(16), -- sdlc(17), -- ds1(18), -- e1(19), -- basicISDN(20), -- primaryISDN(21), -- propPointToPointSerial(22), -- ppp(23), -- softwareLoopback(24), -- eon(25), -- ethernet3Mbit(26), -- nsip(27), -- slip(28), -- ultra(29), -- ds3(30), -- sip(31), -- frameRelay(32), -- rs232(33), -- para(34), -- arcnet(35), -- arcnetPlus(36), -- atm(37), -- miox25(38), -- sonet(39), -- x25ple(40), -- iso88022llc(41), -- localTalk(42), -- smdsDxi(43), -- frameRelayService(44), -- v35(45), -- hssi(46), -- hippi(47), -- modem(48), -- aal5(49), -- sonetPath(50), -- sonetVT(51), -- smdsIcip(52), -- propVirtual(53), -- propMultiplexor(54), -- ieee80212(55), -- fibreChannel(56), -- hippiInterface(57), -- frameRelayInterconnect(58), -- aflane8023(59), -- aflane8025(60), -- cctEmul(61), -- fastEther(62), -- isdn(63), -- v11(64), -- v36(65), -- g703at64k(66), -- g703at2mb(67), -- qllc(68), -- fastEtherFX(69), -- channel(70), -- ieee80211(71), -- ibm370parChan(72), -- escon(73), -- dlsw(74), -- isdns(75), -- isdnu(76), -- lapd(77), -- ipSwitch(78), -- rsrb(79), -- atmLogical(80), -- ds0(81), -- ds0Bundle(82), -- bsc(83), -- async(84), -- cnr(85), -- iso88025Dtr(86), -- eplrs(87), -- arap(88), -- propCnls(89), -- hostPad(90), -- termPad(91), -- frameRelayMPI(92), -- x213(93), -- adsl(94), -- radsl(95), -- sdsl(96), -- vdsl(97), -- iso88025CRFPInt(98), -- myrinet(99), -- voiceEM(100), -- voiceFXO(101), -- voiceFXS(102), -- voiceEncap(103), -- voiceOverIp(104), -- atmDxi(105), -- atmFuni(106), -- atmIma(107), -- pppMultilinkBundle(108), -- ipOverCdlc(109), -- ipOverClaw(110), -- stackToStack(111), -- virtualIpAddress(112), -- mpc(113), -- ipOverAtm(114), -- iso88025Fiber(115), -- tdlc(116), -- gigabitEthernet(117) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The type of DLC interface, distinguished according to the protocol immediately 'below' this layer." ::= { appnPortEntry 4 } appnPortPortType OBJECT-TYPE SYNTAX INTEGER { leased(1), switched(2), sharedAccessFacilities(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the type of line used by this port: leased(1) - leased line switched(2) - switched line sharedAccessFacilities(3) - shared access facility, such as a LAN." ::= { appnPortEntry 5 } appnPortSIMRIM OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether Set Initialization Mode (SIM) and Receive Initialization Mode (RIM) are supported for this port." ::= { appnPortEntry 6 } appnPortLsRole OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2), negotiable(3), abm(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Initial role for link stations activated through this port. The values map to the following settings in the initial XID, where 'ABM' indicates asynchronous balanced mode and 'NRM' indicated normal response mode: primary(1): ABM support = 0 ( = NRM) role = 01 ( = primary) secondary(2): ABM support = 0 ( = NRM) role = 00 ( = secondary) negotiable(3): ABM support = 0 ( = NRM) role = 11 ( = negotiable) abm(4): ABM support = 1 ( = ABM) role = 11 ( = negotiable)" ::= { appnPortEntry 7 } appnPortNegotLs OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node supports negotiable link stations for this port." ::= { appnPortEntry 8 } appnPortDynamicLinkSupport OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node allows call-in on this port from nodes not defined locally." ::= { appnPortEntry 9 } appnPortMaxRcvBtuSize OBJECT-TYPE SYNTAX INTEGER(99..32767) -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "Maximum Basic Transmission Unit (BTU) size that a link station on this port can receive. This object corresponds to bytes 21-22 of XID3." ::= { appnPortEntry 10 } appnPortMaxIframeWindow OBJECT-TYPE SYNTAX Gauge -- Units -- I-frames ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of I-frames that can be received by the XID sender before an acknowledgement is received." ::= { appnPortEntry 11 } appnPortDefLsGoodXids OBJECT-TYPE SYNTAX AppnPortCounter -- Rsyntax Counter -- Units -- XID exchanges ACCESS read-only STATUS mandatory DESCRIPTION "The total number of successful XID exchanges that have occurred on all defined link stations on this port since the last time this port was started." ::= { appnPortEntry 12 } appnPortDefLsBadXids OBJECT-TYPE SYNTAX AppnPortCounter -- Rsyntax Counter -- Units -- XID exchanges ACCESS read-only STATUS mandatory DESCRIPTION "The total number of unsuccessful XID exchanges that have occurred on all defined link stations on this port since the last time this port was started." ::= { appnPortEntry 13 } appnPortDynLsGoodXids OBJECT-TYPE SYNTAX AppnPortCounter -- Rsyntax Counter -- Units -- XID exchanges ACCESS read-only STATUS mandatory DESCRIPTION "The total number of successful XID exchanges that have occurred on all dynamic link stations on this port since the last time this port was started." ::= { appnPortEntry 14 } appnPortDynLsBadXids OBJECT-TYPE SYNTAX AppnPortCounter -- Rsyntax Counter -- Units -- XID exchanges ACCESS read-only STATUS mandatory DESCRIPTION "The total number of unsuccessful XID exchanges that have occurred on all dynamic link stations on this port since the last time this port was started." ::= { appnPortEntry 15 } appnPortSpecific OBJECT-TYPE SYNTAX RowPointer -- Rsyntax OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the object, e.g., one in a DLC-specific MIB, that can provide additional information related to this port. If the agent is unable to identify such an object, the value 0.0 is returned." ::= { appnPortEntry 16 } appnPortDlcLocalAddr OBJECT-TYPE SYNTAX DisplayableDlcAddress -- Rsyntax OCTET STRING(SIZE(0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "Local DLC address of this port." ::= { appnPortEntry 17 } appnPortCounterDisconTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of the sysUpTime object the last time the port was started." ::= { appnPortEntry 18 } appnLsTable OBJECT-TYPE SYNTAX SEQUENCE OF AppnLsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains detailed information about the link station configuration and its current status." ::= { appnLinkStationInformation 1 } appnLsEntry OBJECT-TYPE SYNTAX AppnLsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is indexed by the link station name." INDEX { appnLsName } ::= { appnLsTable 1 } AppnLsEntry ::= SEQUENCE { appnLsName DisplayString, appnLsCommand INTEGER, appnLsOperState INTEGER, appnLsPortName DisplayString, appnLsDlcType IANAifType, appnLsDynamic TruthValue, appnLsAdjCpName OCTET STRING, appnLsAdjNodeType INTEGER, appnLsTgNum INTEGER, appnLsLimResource TruthValue, appnLsActOnDemand TruthValue, appnLsMigration TruthValue, appnLsPartnerNodeId SnaNodeIdentification, appnLsCpCpSessionSupport TruthValue, appnLsMaxSendBtuSize INTEGER, appnLsInXidBytes AppnLinkStationCounter, appnLsInMsgBytes AppnLinkStationCounter, appnLsInXidFrames AppnLinkStationCounter, appnLsInMsgFrames AppnLinkStationCounter, appnLsOutXidBytes AppnLinkStationCounter, appnLsOutMsgBytes AppnLinkStationCounter, appnLsOutXidFrames AppnLinkStationCounter, appnLsOutMsgFrames AppnLinkStationCounter, appnLsEchoRsps AppnLinkStationCounter, appnLsCurrentDelay Gauge, appnLsMaxDelay Gauge, appnLsMinDelay Gauge, appnLsMaxDelayTime DateAndTime, appnLsGoodXids AppnLinkStationCounter, appnLsBadXids AppnLinkStationCounter, appnLsSpecific RowPointer, appnLsActiveTime Gauge, appnLsCurrentStateTime TimeTicks, appnLsHprSup INTEGER, appnLsErrRecoSup TruthValue, appnLsForAnrLabel OCTET STRING, appnLsRevAnrLabel OCTET STRING, appnLsCpCpNceId OCTET STRING, appnLsRouteNceId OCTET STRING, appnLsBfNceId OCTET STRING, appnLsLocalAddr DisplayableDlcAddress, appnLsRemoteAddr DisplayableDlcAddress, appnLsRemoteLsName DisplayString, appnLsCounterDisconTime TimeStamp, appnLsMltgMember TruthValue } appnLsName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..10)) -- Rsyntax OCTET STRING(SIZE(1..10)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Administratively assigned name for the link station. The name can be from one to ten characters." ::= { appnLsEntry 1 } appnLsCommand OBJECT-TYPE SYNTAX INTEGER { deactivate(1), activate(2), recycle(3), ready(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Object by which a Management Station can activate, deactivate, or recycle (i.e., cause to be deactivated and then immediately reactivated) a link station, by setting the value to activate(1), deactivate(2), or recycle(3), respectively. The value ready(4) is returned on GET operations until a SET has been processed; after that the value received on the most recent SET is returned." ::= { appnLsEntry 2 } appnLsOperState OBJECT-TYPE SYNTAX INTEGER { inactive(1), sentConnectOut(2), pendXidExch(3), sendActAs(4), sendSetMode(5), otherPendingActive(6), active(7), sentDeactAsOrd(8), sentDiscOrd(9), sentDiscImmed(10), otherPendingInact(11) } ACCESS read-only STATUS mandatory DESCRIPTION "State of this link station. The comments map these more granular states to the 'traditional' four states for SNA resources. Values (2) through (5) represent the normal progression of states when a link station is being activated. Value (6) represents some other state of a link station in the process of being activated. Values (8) through (10) represent different ways a link station can be deactivated. Value (11) represents some other state of a link station in the process of being deactivated." ::= { appnLsEntry 3 } appnLsPortName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..10)) -- Rsyntax OCTET STRING(SIZE(1..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Administratively assigned name for the port associated with this link station. The name can be from one to ten characters." ::= { appnLsEntry 4 } appnLsDlcType OBJECT-TYPE SYNTAX IANAifType -- Rsyntax INTEGER { -- other(1), -- regular1822(2), -- hdh1822(3), -- ddnX25(4), -- rfc877x25(5), -- ethernetCsmacd(6), -- iso88023Csmacd(7), -- iso88024TokenBus(8), -- iso88025TokenRing(9), -- iso88026Man(10), -- starLan(11), -- proteon10Mbit(12), -- proteon80Mbit(13), -- hyperchannel(14), -- fddi(15), -- lapb(16), -- sdlc(17), -- ds1(18), -- e1(19), -- basicISDN(20), -- primaryISDN(21), -- propPointToPointSerial(22), -- ppp(23), -- softwareLoopback(24), -- eon(25), -- ethernet3Mbit(26), -- nsip(27), -- slip(28), -- ultra(29), -- ds3(30), -- sip(31), -- frameRelay(32), -- rs232(33), -- para(34), -- arcnet(35), -- arcnetPlus(36), -- atm(37), -- miox25(38), -- sonet(39), -- x25ple(40), -- iso88022llc(41), -- localTalk(42), -- smdsDxi(43), -- frameRelayService(44), -- v35(45), -- hssi(46), -- hippi(47), -- modem(48), -- aal5(49), -- sonetPath(50), -- sonetVT(51), -- smdsIcip(52), -- propVirtual(53), -- propMultiplexor(54), -- ieee80212(55), -- fibreChannel(56), -- hippiInterface(57), -- frameRelayInterconnect(58), -- aflane8023(59), -- aflane8025(60), -- cctEmul(61), -- fastEther(62), -- isdn(63), -- v11(64), -- v36(65), -- g703at64k(66), -- g703at2mb(67), -- qllc(68), -- fastEtherFX(69), -- channel(70), -- ieee80211(71), -- ibm370parChan(72), -- escon(73), -- dlsw(74), -- isdns(75), -- isdnu(76), -- lapd(77), -- ipSwitch(78), -- rsrb(79), -- atmLogical(80), -- ds0(81), -- ds0Bundle(82), -- bsc(83), -- async(84), -- cnr(85), -- iso88025Dtr(86), -- eplrs(87), -- arap(88), -- propCnls(89), -- hostPad(90), -- termPad(91), -- frameRelayMPI(92), -- x213(93), -- adsl(94), -- radsl(95), -- sdsl(96), -- vdsl(97), -- iso88025CRFPInt(98), -- myrinet(99), -- voiceEM(100), -- voiceFXO(101), -- voiceFXS(102), -- voiceEncap(103), -- voiceOverIp(104), -- atmDxi(105), -- atmFuni(106), -- atmIma(107), -- pppMultilinkBundle(108), -- ipOverCdlc(109), -- ipOverClaw(110), -- stackToStack(111), -- virtualIpAddress(112), -- mpc(113), -- ipOverAtm(114), -- iso88025Fiber(115), -- tdlc(116), -- gigabitEthernet(117) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The type of DLC interface, distinguished according to the protocol immediately 'below' this layer." ::= { appnLsEntry 5 } appnLsDynamic OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Identifies whether this is a dynamic link station. Dynamic link stations are created when links that have not been locally defined are established by adjacent nodes." ::= { appnLsEntry 6 } appnLsAdjCpName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0|3..17)) ACCESS read-only STATUS mandatory DESCRIPTION "Fully qualified name of the adjacent node for this link station. An adjacent node is identified using the format specified in the SnaControlPointName textual convention. The value of this object is determined as follows: 1. If the adjacent node's name was received on XID, it is returned. 2. If the adjacent node's name was not received on XID, but a locally-defined value is available, it is returned. 3. Otherwise a string of length 0 is returned, indicating that no name is known for the adjacent node." ::= { appnLsEntry 7 } appnLsAdjNodeType OBJECT-TYPE SYNTAX INTEGER { networkNode(1), endNode(2), t21len(4), unknown(255) } ACCESS read-only STATUS mandatory DESCRIPTION "Node type of the adjacent node on this link: networkNode(1) - APPN network node endNode(2) - APPN end node t21len(4) - LEN end node unknown(255) - the agent does not know the node type of the adjacent node" ::= { appnLsEntry 8 } appnLsTgNum OBJECT-TYPE SYNTAX INTEGER(0..256) ACCESS read-only STATUS mandatory DESCRIPTION "Number associated with the TG to this link station, with a range from 0 to 256. A value of 256 indicates that the TG number has not been negotiated and is unknown at this time." ::= { appnLsEntry 9 } appnLsLimResource OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the link station is a limited resource. A link station that is a limited resource is deactivated when it is no longer in use." ::= { appnLsEntry 10 } appnLsActOnDemand OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the link station is activatable on demand. Such a link station is reported in the topology as active regardless of its actual state, so that it can be considered in route calculations. If the link station is inactive and is chosen for a route, it will be activated at that time." ::= { appnLsEntry 11 } appnLsMigration OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this link station will be used for connections to down-level or migration partners. In general, migration nodes do not append their CP names on XID3. Such nodes: (1) will not support parallel TGs, (2) should be sent an ACTIVATE PHYSICAL UNIT (ACTPU), provided that the partner supports ACTPUs, and (3) should not be sent segmented BINDs. However, if this node receives an XID3 with an appended CP name, then the partner node will not be treated as a migration node. In the case of DYNAMIC TGs this object should be set to 'no'." ::= { appnLsEntry 12 } appnLsPartnerNodeId OBJECT-TYPE SYNTAX SnaNodeIdentification -- Rsyntax OCTET STRING(SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "The partner's Node Identification, from bytes 2-5 of the XID received from the partner. If this value is not available, then the characters '00000000' are returned." ::= { appnLsEntry 13 } appnLsCpCpSessionSupport OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether CP-CP sessions are supported by this link station. For a dynamic link, this object represents the default ('Admin') value." ::= { appnLsEntry 14 } appnLsMaxSendBtuSize OBJECT-TYPE SYNTAX INTEGER(99..32767) -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "Numeric value between 99 and 32767 inclusive indicating the maximum number of bytes in a Basic Transmission Unit (BTU) sent on this link. When the link state (returned by the appnLsOperState object) is inactive or pending active, the value configured at this node is returned. When the link state is active, the value that was negotiated for it is returned. This negotiated value is the smaller of the value configured at this node and the partner's maximum receive BTU length, received in XID." ::= { appnLsEntry 15 } appnLsInXidBytes OBJECT-TYPE SYNTAX AppnLinkStationCounter -- Rsyntax Counter -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "Number of XID bytes received. All of the bytes in the SNA basic transmission unit (BTU), i.e., all of the bytes in the DLC XID Information Field, are counted." ::= { appnLsEntry 16 } appnLsInMsgBytes OBJECT-TYPE SYNTAX AppnLinkStationCounter -- Rsyntax Counter -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "Number of message (I-frame) bytes received. All of the bytes in the SNA basic transmission unit (BTU), including the transmission header (TH), are counted." ::= { appnLsEntry 17 } appnLsInXidFrames OBJECT-TYPE SYNTAX AppnLinkStationCounter -- Rsyntax Counter -- Units -- XID frames ACCESS read-only STATUS mandatory DESCRIPTION "Number of XID frames received." ::= { appnLsEntry 18 } appnLsInMsgFrames OBJECT-TYPE SYNTAX AppnLinkStationCounter -- Rsyntax Counter -- Units -- I-frames ACCESS read-only STATUS mandatory DESCRIPTION "Number of message (I-frame) frames received." ::= { appnLsEntry 19 } appnLsOutXidBytes OBJECT-TYPE SYNTAX AppnLinkStationCounter -- Rsyntax Counter -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "Number of XID bytes sent. All of the bytes in the SNA basic transmission unit (BTU), i.e., all of the bytes in the DLC XID Information Field, are counted." ::= { appnLsEntry 20 } appnLsOutMsgBytes OBJECT-TYPE SYNTAX AppnLinkStationCounter -- Rsyntax Counter -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "Number of message (I-frame) bytes sent. All of the bytes in the SNA basic transmission unit (BTU), including the transmission header (TH), are counted." ::= { appnLsEntry 21 } appnLsOutXidFrames OBJECT-TYPE SYNTAX AppnLinkStationCounter -- Rsyntax Counter -- Units -- XID frames ACCESS read-only STATUS mandatory DESCRIPTION "Number of XID frames sent." ::= { appnLsEntry 22 } appnLsOutMsgFrames OBJECT-TYPE SYNTAX AppnLinkStationCounter -- Rsyntax Counter -- Units -- I-frames ACCESS read-only STATUS mandatory DESCRIPTION "Number of message (I-frame) frames sent." ::= { appnLsEntry 23 } appnLsEchoRsps OBJECT-TYPE SYNTAX AppnLinkStationCounter -- Rsyntax Counter -- Units -- echo responses ACCESS read-only STATUS mandatory DESCRIPTION "Number of echo responses returned from adjacent link station. A response should be returned for each test frame sent by this node. Test frames are sent to adjacent nodes periodically to verify connectivity and to measure the actual round trip time, that is, the time interval from when the test frame is sent until when the response is received." ::= { appnLsEntry 24 } appnLsCurrentDelay OBJECT-TYPE SYNTAX Gauge -- Units -- milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The time that it took for the last test signal to be sent and returned from this link station to the adjacent link station. This time is represented in milliseconds." ::= { appnLsEntry 25 } appnLsMaxDelay OBJECT-TYPE SYNTAX Gauge -- Units -- milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The longest time it took for a test signal to be sent and returned from this link station to the adjacent link station. This time is represented in milliseconds . The value 0 is returned if no test signal has been sent and returned." ::= { appnLsEntry 26 } appnLsMinDelay OBJECT-TYPE SYNTAX Gauge -- Units -- milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The shortest time it took for a test signal to be sent and returned from this link station to the adjacent link station. This time is represented in milliseconds. The value 0 is returned if no test signal has been sent and returned." ::= { appnLsEntry 27 } appnLsMaxDelayTime OBJECT-TYPE SYNTAX DateAndTime -- Rsyntax OCTET STRING(SIZE(8|11)) ACCESS read-only STATUS mandatory DESCRIPTION "The time when the longest delay occurred. This time can be used to identify when this high water mark occurred in relation to other events in the APPN node, for example, the time at which an APPC session was either terminated or failed to be established. This latter time is available in the appcHistSessTime object in the APPC MIB. The value 00000000 is returned if no test signal has been sent and returned." ::= { appnLsEntry 28 } appnLsGoodXids OBJECT-TYPE SYNTAX AppnLinkStationCounter -- Rsyntax Counter -- Units -- XID exchanges ACCESS read-only STATUS mandatory DESCRIPTION "The total number of successful XID exchanges that have occurred on this link station since the time it was started." ::= { appnLsEntry 29 } appnLsBadXids OBJECT-TYPE SYNTAX AppnLinkStationCounter -- Rsyntax Counter -- Units -- XID exchanges ACCESS read-only STATUS mandatory DESCRIPTION "The total number of unsuccessful XID exchanges that have occurred on this link station since the time it was started." ::= { appnLsEntry 30 } appnLsSpecific OBJECT-TYPE SYNTAX RowPointer -- Rsyntax OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the object, e.g., one in a DLC-specific MIB, that can provide additional information related to this link station. If the agent is unable to identify such an object, the value 0.0 is returned." ::= { appnLsEntry 31 } appnLsActiveTime OBJECT-TYPE SYNTAX Gauge -- Units -- hundredths of a second ACCESS read-only STATUS mandatory DESCRIPTION "The cumulative amount of time since the node was last reinitialized, measured in hundredths of a second, that this link station has been in the active state. A zero value indicates that the link station has never been active since the node was last reinitialized." ::= { appnLsEntry 32 } appnLsCurrentStateTime OBJECT-TYPE SYNTAX TimeTicks -- Units -- hundredths of a second ACCESS read-only STATUS mandatory DESCRIPTION "The amount of time, measured in hundredths of a second, that the link station has been in its current state." ::= { appnLsEntry 33 } appnLsHprSup OBJECT-TYPE SYNTAX INTEGER { noHprSupport(1), hprBaseOnly(2), rtpTower(3), controlFlowsOverRtpTower(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the level of high performance routing (HPR) support over this link: noHprSupport(1) - no HPR support hprBaseOnly(2) - HPR base (option set 1400) supported rtpTower(3) - HPR base and RTP tower (option set 1401) supported controlFlowsOverRtpTower(4) - HPR base, RTP tower, and control flows over RTP (option set 1402) supported If the link is not active, the defined value is returned." ::= { appnLsEntry 34 } appnLsErrRecoSup OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the link station is supporting HPR link-level error recovery." ::= { appnLsEntry 35 } appnLsForAnrLabel OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The forward Automatic Network Routing (ANR) label for this link station. If the link does not support HPR or the value is unknown, a zero-length string is returned." ::= { appnLsEntry 36 } appnLsRevAnrLabel OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The reverse Automatic Network Routing (ANR) label for this link station. If the link does not support HPR or the value is unknown, a zero-length string is returned." ::= { appnLsEntry 37 } appnLsCpCpNceId OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The network connection endpoint identifier (NCE ID) for CP-CP sessions if this node supports the HPR transport tower, a zero-length string if the value is unknown or not meaningful for this node." ::= { appnLsEntry 38 } appnLsRouteNceId OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The network connection endpoint identifier (NCE ID) for Route Setup if this node supports the HPR transport tower, a zero- length string if the value is unknown or not meaningful for this node." ::= { appnLsEntry 39 } appnLsBfNceId OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The network connection endpoint identifier (NCE ID) for the APPN/HPR boundary function if this node supports the HPR transport tower, a zero-length string if the value is unknown or not meaningful for this node." ::= { appnLsEntry 40 } appnLsLocalAddr OBJECT-TYPE SYNTAX DisplayableDlcAddress -- Rsyntax OCTET STRING(SIZE(0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "Local address of this link station." ::= { appnLsEntry 41 } appnLsRemoteAddr OBJECT-TYPE SYNTAX DisplayableDlcAddress -- Rsyntax OCTET STRING(SIZE(0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "Address of the remote link station on this link." ::= { appnLsEntry 42 } appnLsRemoteLsName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..10)) -- Rsyntax OCTET STRING(SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Remote link station discovered from the XID exchange. The name can be from one to ten characters. A zero-length string indicates that the value is not known." ::= { appnLsEntry 43 } appnLsCounterDisconTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of the sysUpTime object the last time the link station was started." ::= { appnLsEntry 44 } appnLsMltgMember OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the link is a member of a multi-link TG. If the link's TG has been brought up as a multi-link TG, then the link is reported as a member of a multi-link TG, even if it is currently the only active link in the TG." ::= { appnLsEntry 45 } appnLsStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF AppnLsStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information related to exceptional and potentially exceptional conditions that occurred during the activation, XID exchange, and termination of a connection. No entries are created when these activities proceed normally. It is an implementation option when entries are removed from this table." ::= { appnLinkStationInformation 2 } appnLsStatusEntry OBJECT-TYPE SYNTAX AppnLsStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is indexed by the LsStatusIndex, which is an integer that is continuously updated until it eventually wraps." INDEX { appnLsStatusIndex } ::= { appnLsStatusTable 1 } AppnLsStatusEntry ::= SEQUENCE { appnLsStatusIndex INTEGER, appnLsStatusTime DateAndTime, appnLsStatusLsName DisplayString, appnLsStatusCpName DisplayString, appnLsStatusPartnerId SnaNodeIdentification, appnLsStatusTgNum INTEGER, appnLsStatusGeneralSense SnaSenseData, appnLsStatusRetry TruthValue, appnLsStatusEndSense SnaSenseData, appnLsStatusXidLocalSense SnaSenseData, appnLsStatusXidRemoteSense SnaSenseData, appnLsStatusXidByteInError INTEGER, appnLsStatusXidBitInError INTEGER, appnLsStatusDlcType IANAifType, appnLsStatusLocalAddr DisplayableDlcAddress, appnLsStatusRemoteAddr DisplayableDlcAddress } appnLsStatusIndex OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Table index. The value of the index begins at zero and is incremented up to a maximum value of 2**31-1 (2,147,483,647) before wrapping." ::= { appnLsStatusEntry 1 } appnLsStatusTime OBJECT-TYPE SYNTAX DateAndTime -- Rsyntax OCTET STRING(SIZE(8|11)) ACCESS read-only STATUS mandatory DESCRIPTION "Time when the exception condition occurred. This time can be used to identify when this event occurred in relation to other events in the APPN node, for example, the time at which an APPC session was either terminated or failed to be established. This latter time is available in the appcHistSessTime object in the APPC MIB." ::= { appnLsStatusEntry 2 } appnLsStatusLsName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..10)) -- Rsyntax OCTET STRING(SIZE(1..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Administratively assigned name for the link station experiencing the condition." ::= { appnLsStatusEntry 3 } appnLsStatusCpName OBJECT-TYPE SYNTAX DisplayString(SIZE(0|3..17)) -- Rsyntax OCTET STRING(SIZE(0|3..17)) ACCESS read-only STATUS mandatory DESCRIPTION "Fully qualified name of the adjacent node for this link station. An adjacent node is identified using the format specified in the SnaControlPointName textual convention. The value of this object is determined as follows: 1. If the adjacent node's name was received on XID, it is returned. 2. If the adjacent node's name was not received on XID, but a locally-defined value is available, it is returned. 3. Otherwise a string of length 0 is returned, indicating that no name is known for the adjacent node." ::= { appnLsStatusEntry 4 } appnLsStatusPartnerId OBJECT-TYPE SYNTAX SnaNodeIdentification -- Rsyntax OCTET STRING(SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "The partner's Node Identification, from bytes 2-5 of the XID received from the partner. If this value is not available, then the characters '00000000' are returned." ::= { appnLsStatusEntry 5 } appnLsStatusTgNum OBJECT-TYPE SYNTAX INTEGER(0..256) ACCESS read-only STATUS mandatory DESCRIPTION "Number associated with the TG to this link station, with a range from 0 to 256. A value of 256 indicates that the TG number was unknown at the time of the failure." ::= { appnLsStatusEntry 6 } appnLsStatusGeneralSense OBJECT-TYPE SYNTAX SnaSenseData -- Rsyntax OCTET STRING(SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "The error sense data associated with the start sequence of activation of a link up to the beginning of the XID sequence. This is the sense data that came from Configuration Services whenever the link did not activate or when it went inactive." ::= { appnLsStatusEntry 7 } appnLsStatusRetry OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node will retry the start request to activate the link." ::= { appnLsStatusEntry 8 } appnLsStatusEndSense OBJECT-TYPE SYNTAX SnaSenseData -- Rsyntax OCTET STRING(SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "The sense data associated with the termination of the link connection to adjacent node. This is the sense data that came from the DLC layer." ::= { appnLsStatusEntry 9 } appnLsStatusXidLocalSense OBJECT-TYPE SYNTAX SnaSenseData -- Rsyntax OCTET STRING(SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "The sense data associated with the rejection of the XID. This is the sense data that came from the local node (this node) when it built the XID Negotiation Error control vector (cv22) to send to the remote node." ::= { appnLsStatusEntry 10 } appnLsStatusXidRemoteSense OBJECT-TYPE SYNTAX SnaSenseData -- Rsyntax OCTET STRING(SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "The sense data the adjacent node returned to this node indicating the reason the XID was rejected. This is the sense data that came from the remote node in the XID Negotiation Error control vector (cv22) it sent to the local node (this node)." ::= { appnLsStatusEntry 11 } appnLsStatusXidByteInError OBJECT-TYPE SYNTAX INTEGER(0..65536) ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the actual byte in the XID that caused the error. The value 65536 indicates that the object has no meaning. For values in the range 0-65535, this object corresponds to bytes 2-3 of the XID Negotiation (X'22') control vector." ::= { appnLsStatusEntry 12 } appnLsStatusXidBitInError OBJECT-TYPE SYNTAX INTEGER(0..8) ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the actual bit in error (0 through 7) within the errored byte of the XID. The value 8 indicates that this object has no meaning. For values in the range 0-7, this object corresponds to byte 4 of the XID Negotiation (X'22') control vector." ::= { appnLsStatusEntry 13 } appnLsStatusDlcType OBJECT-TYPE SYNTAX IANAifType -- Rsyntax INTEGER { -- other(1), -- regular1822(2), -- hdh1822(3), -- ddnX25(4), -- rfc877x25(5), -- ethernetCsmacd(6), -- iso88023Csmacd(7), -- iso88024TokenBus(8), -- iso88025TokenRing(9), -- iso88026Man(10), -- starLan(11), -- proteon10Mbit(12), -- proteon80Mbit(13), -- hyperchannel(14), -- fddi(15), -- lapb(16), -- sdlc(17), -- ds1(18), -- e1(19), -- basicISDN(20), -- primaryISDN(21), -- propPointToPointSerial(22), -- ppp(23), -- softwareLoopback(24), -- eon(25), -- ethernet3Mbit(26), -- nsip(27), -- slip(28), -- ultra(29), -- ds3(30), -- sip(31), -- frameRelay(32), -- rs232(33), -- para(34), -- arcnet(35), -- arcnetPlus(36), -- atm(37), -- miox25(38), -- sonet(39), -- x25ple(40), -- iso88022llc(41), -- localTalk(42), -- smdsDxi(43), -- frameRelayService(44), -- v35(45), -- hssi(46), -- hippi(47), -- modem(48), -- aal5(49), -- sonetPath(50), -- sonetVT(51), -- smdsIcip(52), -- propVirtual(53), -- propMultiplexor(54), -- ieee80212(55), -- fibreChannel(56), -- hippiInterface(57), -- frameRelayInterconnect(58), -- aflane8023(59), -- aflane8025(60), -- cctEmul(61), -- fastEther(62), -- isdn(63), -- v11(64), -- v36(65), -- g703at64k(66), -- g703at2mb(67), -- qllc(68), -- fastEtherFX(69), -- channel(70), -- ieee80211(71), -- ibm370parChan(72), -- escon(73), -- dlsw(74), -- isdns(75), -- isdnu(76), -- lapd(77), -- ipSwitch(78), -- rsrb(79), -- atmLogical(80), -- ds0(81), -- ds0Bundle(82), -- bsc(83), -- async(84), -- cnr(85), -- iso88025Dtr(86), -- eplrs(87), -- arap(88), -- propCnls(89), -- hostPad(90), -- termPad(91), -- frameRelayMPI(92), -- x213(93), -- adsl(94), -- radsl(95), -- sdsl(96), -- vdsl(97), -- iso88025CRFPInt(98), -- myrinet(99), -- voiceEM(100), -- voiceFXO(101), -- voiceFXS(102), -- voiceEncap(103), -- voiceOverIp(104), -- atmDxi(105), -- atmFuni(106), -- atmIma(107), -- pppMultilinkBundle(108), -- ipOverCdlc(109), -- ipOverClaw(110), -- stackToStack(111), -- virtualIpAddress(112), -- mpc(113), -- ipOverAtm(114), -- iso88025Fiber(115), -- tdlc(116), -- gigabitEthernet(117) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The type of DLC interface, distinguished according to the protocol immediately 'below' this layer." ::= { appnLsStatusEntry 14 } appnLsStatusLocalAddr OBJECT-TYPE SYNTAX DisplayableDlcAddress -- Rsyntax OCTET STRING(SIZE(0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "Local address of this link station." ::= { appnLsStatusEntry 15 } appnLsStatusRemoteAddr OBJECT-TYPE SYNTAX DisplayableDlcAddress -- Rsyntax OCTET STRING(SIZE(0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "Address of the remote link station on this link." ::= { appnLsStatusEntry 16 } appnVrnTable OBJECT-TYPE SYNTAX SEQUENCE OF AppnVrnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table relates a virtual routing node to an APPN port." ::= { appnVrnInfo 1 } appnVrnEntry OBJECT-TYPE SYNTAX AppnVrnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is indexed by the virtual routing node name, TG number, and port name. There will be a matching entry in the appnLocalTgTable to represent status and characteristics of the TG representing each virtual routing node definition." INDEX { appnVrnName, appnVrnTgNum, appnVrnPortName } ::= { appnVrnTable 1 } AppnVrnEntry ::= SEQUENCE { appnVrnName SnaControlPointName, appnVrnTgNum INTEGER, appnVrnPortName DisplayString } appnVrnName OBJECT-TYPE SYNTAX SnaControlPointName -- Rsyntax OCTET STRING(SIZE(3..17)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Administratively assigned name of the virtual routing node. This is a fully qualified name, and matches the appnLocalTgDest name in the appnLocalTgTable." ::= { appnVrnEntry 1 } appnVrnTgNum OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "Number associated with the transmission group representing this virtual routing node definition." ::= { appnVrnEntry 2 } appnVrnPortName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..10)) -- Rsyntax OCTET STRING(SIZE(1..10)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the port this virtual routing node definition is defined to." ::= { appnVrnEntry 3 } appnNnTopoMaxNodes OBJECT-TYPE SYNTAX Gauge -- Units -- node entries ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of node entries allowed in the APPN topology database. It is an implementation choice whether to count only network-node entries, or to count all node entries. If the number of node entries exceeds this value, APPN will issue an Alert and the node can no longer participate as a network node. The value 0 indicates that the local node has no defined limit, and the number of node entries is bounded only by memory." ::= { appnNnTopo 1 } appnNnTopoCurNumNodes OBJECT-TYPE SYNTAX Gauge -- Units -- node entries ACCESS read-only STATUS mandatory DESCRIPTION "Current number of node entries in this node's topology database. It is an implementation choice whether to count only network-node entries, or to count all node entries, but an implementation must make the same choice here that it makes for the appnNnTopoMaxNodes object. If this value exceeds the maximum number of nodes allowed (appnNnTopoMaxNodes, if that field in not 0), APPN Alert CPDB002 is issued." ::= { appnNnTopo 2 } appnNnTopoNodePurges OBJECT-TYPE SYNTAX AppnNodeCounter -- Rsyntax Counter -- Units -- node entries ACCESS read-only STATUS mandatory DESCRIPTION "Total number of topology node records purged from this node's topology database since the node was last reinitialized." ::= { appnNnTopo 3 } appnNnTopoTgPurges OBJECT-TYPE SYNTAX AppnNodeCounter -- Rsyntax Counter -- Units -- TG entries ACCESS read-only STATUS mandatory DESCRIPTION "Total number of topology TG records purged from this node's topology database since the node was last reinitialized." ::= { appnNnTopo 4 } appnNnTopoTotalTduWars OBJECT-TYPE SYNTAX AppnNodeCounter -- Rsyntax Counter -- Units -- TDU wars ACCESS read-only STATUS mandatory DESCRIPTION "Number of TDU wars detected by this node since its last initialization." ::= { appnNnTopo 5 } appnNnTopologyFRTable OBJECT-TYPE SYNTAX SEQUENCE OF AppnNnTopologyFREntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Portion of the APPN topology database that describes all of the APPN network nodes and virtual routing nodes known to this node." ::= { appnNnTopology 3 } appnNnTopologyFREntry OBJECT-TYPE SYNTAX AppnNnTopologyFREntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The FRSN and the fully qualified node name are used to index this table." INDEX { appnNnNodeFRFrsn, appnNnNodeFRName } ::= { appnNnTopologyFRTable 1 } AppnNnTopologyFREntry ::= SEQUENCE { appnNnNodeFRFrsn Gauge, appnNnNodeFRName SnaControlPointName, appnNnNodeFREntryTimeLeft AppnTopologyEntryTimeLeft, appnNnNodeFRType INTEGER, appnNnNodeFRRsn Gauge, appnNnNodeFRRouteAddResist INTEGER, appnNnNodeFRCongested TruthValue, appnNnNodeFRIsrDepleted TruthValue, appnNnNodeFRQuiescing TruthValue, appnNnNodeFRGateway TruthValue, appnNnNodeFRCentralDirectory TruthValue, appnNnNodeFRIsr TruthValue, appnNnNodeFRGarbageCollect TruthValue, appnNnNodeFRHprSupport INTEGER, appnNnNodeFRPeriBorderSup TruthValue, appnNnNodeFRInterchangeSup TruthValue, appnNnNodeFRExteBorderSup TruthValue, appnNnNodeFRBranchAwareness TruthValue } appnNnNodeFRFrsn OBJECT-TYPE SYNTAX Gauge ACCESS not-accessible STATUS mandatory DESCRIPTION "Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last relative time this resource was updated at the agent node." ::= { appnNnTopologyFREntry 1 } appnNnNodeFRName OBJECT-TYPE SYNTAX SnaControlPointName -- Rsyntax OCTET STRING(SIZE(3..17)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Administratively assigned network name that is locally defined at each network node." ::= { appnNnTopologyFREntry 2 } appnNnNodeFREntryTimeLeft OBJECT-TYPE SYNTAX AppnTopologyEntryTimeLeft -- Rsyntax INTEGER(0..15) -- Units -- days ACCESS read-only STATUS mandatory DESCRIPTION "Number of days before deletion of this network node entry." ::= { appnNnTopologyFREntry 3 } appnNnNodeFRType OBJECT-TYPE SYNTAX INTEGER { networkNode(1), virtualRoutingNode(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of APPN node." ::= { appnNnTopologyFREntry 4 } appnNnNodeFRRsn OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Resource sequence number, which is assigned and controlled by the network node that owns this resource. An odd number indicates that information about the resource is inconsistent. This object corresponds to the numeric value in cv4580, bytes 2-5." ::= { appnNnTopologyFREntry 5 } appnNnNodeFRRouteAddResist OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Route addition resistance. This administratively assigned value indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing. This object corresponds to cv4580, byte 6." ::= { appnNnTopologyFREntry 6 } appnNnNodeFRCongested OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists. This object corresponds to cv4580, byte 7, bit 0." ::= { appnNnTopologyFREntry 7 } appnNnNodeFRIsrDepleted OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources are depleted. This object corresponds to cv4580, byte 7, bit 1." ::= { appnNnTopologyFREntry 8 } appnNnNodeFRQuiescing OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing. This object corresponds to cv4580, byte 7, bit 5." ::= { appnNnTopologyFREntry 9 } appnNnNodeFRGateway OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node provide gateway services. This object corresponds to cv4580, byte 8, bit 0." ::= { appnNnTopologyFREntry 10 } appnNnNodeFRCentralDirectory OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node supports central directory services. This object corresponds to cv4580, byte 8, bit 1." ::= { appnNnTopologyFREntry 11 } appnNnNodeFRIsr OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node supports intermediate session routing (ISR). This object corresponds to cv4580, byte 8, bit 2." ::= { appnNnTopologyFREntry 12 } appnNnNodeFRGarbageCollect OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the node has been marked for garbage collection (deletion from the topology database) upon the next garbage collection cycle. This object corresponds to cv4580, byte 7, bit 3." ::= { appnNnTopologyFREntry 13 } appnNnNodeFRHprSupport OBJECT-TYPE SYNTAX INTEGER { noHprSupport(1), hprBaseOnly(2), rtpTower(3), controlFlowsOverRtpTower(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the node's level of support for high-performance routing (HPR): noHprSupport(1) - no HPR support hprBaseOnly(2) - HPR base (option set 1400) supported rtpTower(3) - HPR base and RTP tower (option set 1401) supported controlFlowsOverRtpTower(4) - HPR base, RTP tower, and control flows over RTP (option set 1402) supported This object corresponds to cv4580, byte 9, bits 3-4." ::= { appnNnTopologyFREntry 14 } appnNnNodeFRPeriBorderSup OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node has peripheral border node support. This object corresponds to cv4580, byte 9, bit 0." ::= { appnNnTopologyFREntry 15 } appnNnNodeFRInterchangeSup OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node has interchange node support. This object corresponds to cv4580, byte 9, bit 1." ::= { appnNnTopologyFREntry 16 } appnNnNodeFRExteBorderSup OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node has extended border node support. This object corresponds to cv4580, byte 9, bit 2." ::= { appnNnTopologyFREntry 17 } appnNnNodeFRBranchAwareness OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this node supports branch awareness. This object corresponds to cv4580, byte 8, bit 4." ::= { appnNnTopologyFREntry 18 } appnNnTgTopologyFRTable OBJECT-TYPE SYNTAX SEQUENCE OF AppnNnTgTopologyFREntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Portion of the APPN topology database that describes all of the APPN transmissions groups between nodes in the database." ::= { appnNnTopology 4 } appnNnTgTopologyFREntry OBJECT-TYPE SYNTAX AppnNnTgTopologyFREntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is indexed by four columns: FRSN, TG owner fully qualified node name, TG destination fully qualified node name, and TG number." INDEX { appnNnTgFRFrsn, appnNnTgFROwner, appnNnTgFRDest, appnNnTgFRNum } ::= { appnNnTgTopologyFRTable 1 } AppnNnTgTopologyFREntry ::= SEQUENCE { appnNnTgFRFrsn Gauge, appnNnTgFROwner SnaControlPointName, appnNnTgFRDest SnaControlPointName, appnNnTgFRNum INTEGER, appnNnTgFREntryTimeLeft AppnTopologyEntryTimeLeft, appnNnTgFRDestVirtual TruthValue, appnNnTgFRDlcData AppnTgDlcData, appnNnTgFRRsn Gauge, appnNnTgFROperational TruthValue, appnNnTgFRQuiescing TruthValue, appnNnTgFRCpCpSession INTEGER, appnNnTgFREffCap AppnTgEffectiveCapacity, appnNnTgFRConnCost INTEGER, appnNnTgFRByteCost INTEGER, appnNnTgFRSecurity AppnTgSecurity, appnNnTgFRDelay AppnTgDelay, appnNnTgFRUsr1 INTEGER, appnNnTgFRUsr2 INTEGER, appnNnTgFRUsr3 INTEGER, appnNnTgFRGarbageCollect TruthValue, appnNnTgFRSubareaNum Gauge, appnNnTgFRHprSup TruthValue, appnNnTgFRDestHprTrans TruthValue, appnNnTgFRTypeIndicator INTEGER, appnNnTgFRIntersubnet TruthValue, appnNnTgFRMltgLinkType TruthValue, appnNnTgFRBranchTg TruthValue } appnNnTgFRFrsn OBJECT-TYPE SYNTAX Gauge ACCESS not-accessible STATUS mandatory DESCRIPTION "Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node." ::= { appnNnTgTopologyFREntry 1 } appnNnTgFROwner OBJECT-TYPE SYNTAX SnaControlPointName -- Rsyntax OCTET STRING(SIZE(3..17)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Administratively assigned name for the originating node for this TG. This is the same name specified in the node table." ::= { appnNnTgTopologyFREntry 2 } appnNnTgFRDest OBJECT-TYPE SYNTAX SnaControlPointName -- Rsyntax OCTET STRING(SIZE(3..17)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Administratively assigned fully qualified network name for the destination node for this TG." ::= { appnNnTgTopologyFREntry 3 } appnNnTgFRNum OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "Number associated with this transmission group. Range is 0-255." ::= { appnNnTgTopologyFREntry 4 } appnNnTgFREntryTimeLeft OBJECT-TYPE SYNTAX AppnTopologyEntryTimeLeft -- Rsyntax INTEGER(0..15) -- Units -- days ACCESS read-only STATUS mandatory DESCRIPTION "Number of days before deletion of this network node TG entry if it is not operational or has an odd (inconsistent) RSN." ::= { appnNnTgTopologyFREntry 5 } appnNnTgFRDestVirtual OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the destination node is a virtual routing node." ::= { appnNnTgTopologyFREntry 6 } appnNnTgFRDlcData OBJECT-TYPE SYNTAX AppnTgDlcData -- Rsyntax OCTET STRING(SIZE(0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "DLC-specific data related to a link connection network." ::= { appnNnTgTopologyFREntry 7 } appnNnTgFRRsn OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Current owning node's resource sequence number for this resource. An odd number indicates that information about the resource is inconsistent. This object corresponds to the numeric value in cv47, bytes 2-5" ::= { appnNnTgTopologyFREntry 8 } appnNnTgFROperational OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the transmission group is operational. This object corresponds to cv47, byte 6, bit 0." ::= { appnNnTgTopologyFREntry 9 } appnNnTgFRQuiescing OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the transmission group is quiescing. If the TG owner is either an extended border node or a branch-aware network node (indicated, respectively, by the appnNnNodeFRExteBorderSup and appnNnNodeFRBranchAwareness objects in the corresponding appnNnTopologyFREntry), then this indicator is artificially set to TRUE in the APPN topology database, to remove the TG from other nodes' route calculations. A management application can determine whether the TG is actually quiescing by examining its appnLocalTgQuiescing object at the TG owner. This object corresponds to cv47, byte 6, bit 2." ::= { appnNnTgTopologyFREntry 10 } appnNnTgFRCpCpSession OBJECT-TYPE SYNTAX INTEGER { supportedUnknownStatus(1), supportedActive(2), notSupported(3), supportedNotActive(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether CP-CP sessions are supported on this TG, and whether the TG owner's contention-winner session is active on this TG. Some nodes in the network are not able to differentiate support and status of CP-CP sessions, and thus may report the 'supportedUnknownStatus' value. This object corresponds to cv47, byte 6, bits 3-4." ::= { appnNnTgTopologyFREntry 11 } appnNnTgFREffCap OBJECT-TYPE SYNTAX AppnTgEffectiveCapacity -- Rsyntax OCTET STRING(SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "Effective capacity for this TG." ::= { appnNnTgTopologyFREntry 12 } appnNnTgFRConnCost OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Cost per connect time. This is an administratively assigned value representing the relative cost per unit of time to use this TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This object corresponds to cv47, byte 13." ::= { appnNnTgTopologyFREntry 13 } appnNnTgFRByteCost OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Cost per byte transmitted. This is an administratively assigned value representing the relative cost of transmitting a byte over this TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This object corresponds to cv47, byte 14." ::= { appnNnTgTopologyFREntry 14 } appnNnTgFRSecurity OBJECT-TYPE SYNTAX AppnTgSecurity -- Rsyntax INTEGER { -- nonsecure(1), -- publicSwitchedNetwork(32), -- undergroundCable(64), -- secureConduit(96), -- guardedConduit(128), -- encrypted(160), -- guardedRadiation(192) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Administratively assigned security level of this TG. This object corresponds to cv47, byte 16." ::= { appnNnTgTopologyFREntry 15 } appnNnTgFRDelay OBJECT-TYPE SYNTAX AppnTgDelay -- Rsyntax OCTET STRING(SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "Administratively assigned delay associated with this TG. This object corresponds to cv47, byte 17." ::= { appnNnTgTopologyFREntry 16 } appnNnTgFRUsr1 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "First user-defined TG characteristic for this TG. This is an administratively assigned value associated with the TG. This object corresponds to cv47, byte 19." ::= { appnNnTgTopologyFREntry 17 } appnNnTgFRUsr2 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Second user-defined TG characteristic for this TG. This is an administratively assigned value associated with the TG. This object corresponds to cv47, byte 20." ::= { appnNnTgTopologyFREntry 18 } appnNnTgFRUsr3 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Third user-defined TG characteristic for this TG. This is an administratively assigned value associated with the TG. This object corresponds to cv47, byte 21." ::= { appnNnTgTopologyFREntry 19 } appnNnTgFRGarbageCollect OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the TG has been marked for garbage collection (deletion from the topology database) upon the next garbage collection cycle. This object corresponds to cv47, byte 6, bit 1." ::= { appnNnTgTopologyFREntry 20 } appnNnTgFRSubareaNum OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The subarea number associated with this TG. This object corresponds to cv4680, bytes m+2 through m+5." ::= { appnNnTgTopologyFREntry 21 } appnNnTgFRHprSup OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether high performance routing (HPR) is supported over this TG. This object corresponds to cv4680, byte m+1, bit 2." ::= { appnNnTgTopologyFREntry 22 } appnNnTgFRDestHprTrans OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the destination node supports high performance routing (HPR) transport tower. This object corresponds to cv4680, byte m+1, bit 7." ::= { appnNnTgTopologyFREntry 23 } appnNnTgFRTypeIndicator OBJECT-TYPE SYNTAX INTEGER { unknown(1), appnOrBfTg(2), interchangeTg(3), virtualRouteTg(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the type of the TG. This object corresponds to cv4680, byte m+1, bits 3-4." ::= { appnNnTgTopologyFREntry 24 } appnNnTgFRIntersubnet OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the transmission group is an intersubnet TG, which defines a border between subnetworks. This object corresponds to cv4680, byte m+1, bit 5." ::= { appnNnTgTopologyFREntry 25 } appnNnTgFRMltgLinkType OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates whether the transmission group is a multi-link TG. A TG that has been brought up as a multi-link TG is reported as one, even if it currently has only one link active. This object corresponds to cv47, byte 6, bit 5." ::= { appnNnTgTopologyFREntry 26 } appnNnTgFRBranchTg OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the transmission group is a branch TG (equivalently, whether the destination of the transmission group is a branch network node). This object corresponds to cv4680, byte m+1, bit 1." ::= { appnNnTgTopologyFREntry 27 } appnLocalTgTable OBJECT-TYPE SYNTAX SEQUENCE OF AppnLocalTgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "TG Table describes all of the TGs owned by this node. The TG destination can be a virtual node, network node, LEN node, or end node." ::= { appnLocalTopology 1 } appnLocalTgEntry OBJECT-TYPE SYNTAX AppnLocalTgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is indexed by the destination CpName and the TG number." INDEX { appnLocalTgDest, appnLocalTgNum } ::= { appnLocalTgTable 1 } AppnLocalTgEntry ::= SEQUENCE { appnLocalTgDest SnaControlPointName, appnLocalTgNum INTEGER, appnLocalTgDestVirtual TruthValue, appnLocalTgDlcData AppnTgDlcData, appnLocalTgPortName DisplayString, appnLocalTgQuiescing TruthValue, appnLocalTgOperational TruthValue, appnLocalTgCpCpSession INTEGER, appnLocalTgEffCap AppnTgEffectiveCapacity, appnLocalTgConnCost INTEGER, appnLocalTgByteCost INTEGER, appnLocalTgSecurity AppnTgSecurity, appnLocalTgDelay AppnTgDelay, appnLocalTgUsr1 INTEGER, appnLocalTgUsr2 INTEGER, appnLocalTgUsr3 INTEGER, appnLocalTgHprSup INTEGER, appnLocalTgIntersubnet TruthValue, appnLocalTgMltgLinkType TruthValue, appnLocalTgBranchLinkType INTEGER } appnLocalTgDest OBJECT-TYPE SYNTAX SnaControlPointName -- Rsyntax OCTET STRING(SIZE(3..17)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Administratively assigned name of the destination node for this TG. This is the fully qualified name of a network node, end node, LEN node, or virtual routing node." ::= { appnLocalTgEntry 1 } appnLocalTgNum OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "Number associated with this transmission group." ::= { appnLocalTgEntry 2 } appnLocalTgDestVirtual OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the destination node for this TG is a virtual routing node." ::= { appnLocalTgEntry 3 } appnLocalTgDlcData OBJECT-TYPE SYNTAX AppnTgDlcData -- Rsyntax OCTET STRING(SIZE(0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "DLC-specific data related to a link connection network." ::= { appnLocalTgEntry 4 } appnLocalTgPortName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..10)) -- Rsyntax OCTET STRING(SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Administratively assigned name for the local port associated with this TG. A zero-length string indicates that this value is unknown." ::= { appnLocalTgEntry 5 } appnLocalTgQuiescing OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the transmission group is quiescing." ::= { appnLocalTgEntry 6 } appnLocalTgOperational OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the transmission group is operational." ::= { appnLocalTgEntry 7 } appnLocalTgCpCpSession OBJECT-TYPE SYNTAX INTEGER { supportedUnknownStatus(1), supportedActive(2), notSupported(3), supportedNotActive(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether CP-CP sessions are supported on this TG, and whether the TG owner's contention-winner session is active on this TG. Some nodes in the network are not able to differentiate support and status of CP-CP sessions, and thus may report the 'supportedUnknownStatus' value." ::= { appnLocalTgEntry 8 } appnLocalTgEffCap OBJECT-TYPE SYNTAX AppnTgEffectiveCapacity -- Rsyntax OCTET STRING(SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "Effective capacity for this TG." ::= { appnLocalTgEntry 9 } appnLocalTgConnCost OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255." ::= { appnLocalTgEntry 10 } appnLocalTgByteCost OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255." ::= { appnLocalTgEntry 11 } appnLocalTgSecurity OBJECT-TYPE SYNTAX AppnTgSecurity -- Rsyntax INTEGER { -- nonsecure(1), -- publicSwitchedNetwork(32), -- undergroundCable(64), -- secureConduit(96), -- guardedConduit(128), -- encrypted(160), -- guardedRadiation(192) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Administratively assigned security level of this TG." ::= { appnLocalTgEntry 12 } appnLocalTgDelay OBJECT-TYPE SYNTAX AppnTgDelay -- Rsyntax OCTET STRING(SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "Administratively assigned delay associated with this TG." ::= { appnLocalTgEntry 13 } appnLocalTgUsr1 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "First user-defined TG characteristic for this TG. This is an administratively assigned value associated with the TG." ::= { appnLocalTgEntry 14 } appnLocalTgUsr2 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Second user-defined TG characteristic for this TG. This is an administratively assigned value associated with the TG." ::= { appnLocalTgEntry 15 } appnLocalTgUsr3 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Third user-defined TG characteristic for this TG. This is an administratively assigned value associated with the TG." ::= { appnLocalTgEntry 16 } appnLocalTgHprSup OBJECT-TYPE SYNTAX INTEGER { noHprSupport(1), hprBaseOnly(2), rtpTower(3), controlFlowsOverRtpTower(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the level of high performance routing (HPR) support over this TG : noHprSupport(1) - no HPR support hprBaseOnly(2) - HPR base (option set 1400) supported rtpTower(3) - HPR base and RTP tower (option set 1401) supported controlFlowsOverRtpTower(4) - HPR base, RTP tower, and control flows over RTP (option set 1402) supported" ::= { appnLocalTgEntry 17 } appnLocalTgIntersubnet OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the transmission group is an intersubnet TG, which defines a border between subnetworks." ::= { appnLocalTgEntry 18 } appnLocalTgMltgLinkType OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates whether the transmission group is a multi-link TG. A TG that has been brought up as a multi-link TG is reported as one, even if it currently has only one link active." ::= { appnLocalTgEntry 19 } appnLocalTgBranchLinkType OBJECT-TYPE SYNTAX INTEGER { other(1), uplink(2), downlink(3), downlinkToBranchNetworkNode(4), none(5), unknown(255) } ACCESS read-only STATUS mandatory DESCRIPTION "Branch link type of this TG: other(1) = the agent has determined the TG's branch link type to be a value other than branch uplink or branch downlink. This is the value used for a connection network TG owned by a branch network node. uplink(2) = the TG is a branch uplink. downlink(3) = the TG is a branch downlink to an end node. downlinkToBranchNetworkNode(4) = the TG is a branch downlink to a cascaded branch network node. none(5) = the TG is not a branch TG. unknown(255) = the agent cannot determine the branch link type of the TG." ::= { appnLocalTgEntry 20 } appnLocalEnTgTable OBJECT-TYPE SYNTAX SEQUENCE OF AppnLocalEnTgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table describing all of the TGs owned by the end nodes known to this node via TG registration. This node does not represent its own view of the TG on behalf of the partner node in this table. The TG destination can be a virtual routing node, network node, or end node." ::= { appnLocalTopology 2 } appnLocalEnTgEntry OBJECT-TYPE SYNTAX AppnLocalEnTgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table requires multiple indexes to uniquely identify each TG. They are originating CPname, destination CPname, and the TG number." INDEX { appnLocalEnTgOrigin, appnLocalEnTgDest, appnLocalEnTgNum } ::= { appnLocalEnTgTable 1 } AppnLocalEnTgEntry ::= SEQUENCE { appnLocalEnTgOrigin SnaControlPointName, appnLocalEnTgDest SnaControlPointName, appnLocalEnTgNum INTEGER, appnLocalEnTgEntryTimeLeft AppnTopologyEntryTimeLeft, appnLocalEnTgDestVirtual TruthValue, appnLocalEnTgDlcData AppnTgDlcData, appnLocalEnTgOperational TruthValue, appnLocalEnTgCpCpSession INTEGER, appnLocalEnTgEffCap AppnTgEffectiveCapacity, appnLocalEnTgConnCost INTEGER, appnLocalEnTgByteCost INTEGER, appnLocalEnTgSecurity AppnTgSecurity, appnLocalEnTgDelay AppnTgDelay, appnLocalEnTgUsr1 INTEGER, appnLocalEnTgUsr2 INTEGER, appnLocalEnTgUsr3 INTEGER, appnLocalEnTgMltgLinkType TruthValue } appnLocalEnTgOrigin OBJECT-TYPE SYNTAX SnaControlPointName -- Rsyntax OCTET STRING(SIZE(3..17)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Administratively assigned name of the origin node for this TG. This is a fully qualified network name." ::= { appnLocalEnTgEntry 1 } appnLocalEnTgDest OBJECT-TYPE SYNTAX SnaControlPointName -- Rsyntax OCTET STRING(SIZE(3..17)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Administratively assigned name of the destination node for this TG. This is the fully qualified name of a network node, end node, LEN node, or virtual routing node." ::= { appnLocalEnTgEntry 2 } appnLocalEnTgNum OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "Number associated with this transmission group." ::= { appnLocalEnTgEntry 3 } appnLocalEnTgEntryTimeLeft OBJECT-TYPE SYNTAX AppnTopologyEntryTimeLeft -- Rsyntax INTEGER(0..15) -- Units -- days ACCESS read-only STATUS mandatory DESCRIPTION "Number of days before deletion of this end node TG entry." ::= { appnLocalEnTgEntry 4 } appnLocalEnTgDestVirtual OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the destination node is a virtual routing node." ::= { appnLocalEnTgEntry 5 } appnLocalEnTgDlcData OBJECT-TYPE SYNTAX AppnTgDlcData -- Rsyntax OCTET STRING(SIZE(0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "DLC-specific data related to a link connection network." ::= { appnLocalEnTgEntry 6 } appnLocalEnTgOperational OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the transmission group is operational." ::= { appnLocalEnTgEntry 7 } appnLocalEnTgCpCpSession OBJECT-TYPE SYNTAX INTEGER { supportedUnknownStatus(1), supportedActive(2), notSupported(3), supportedNotActive(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether CP-CP sessions are supported on this TG, and whether the TG owner's contention-winner session is active on this TG. Some nodes in the network are not able to differentiate support and status of CP-CP sessions, and thus may report the 'supportedUnknownStatus' value." ::= { appnLocalEnTgEntry 8 } appnLocalEnTgEffCap OBJECT-TYPE SYNTAX AppnTgEffectiveCapacity -- Rsyntax OCTET STRING(SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "Effective capacity for this TG." ::= { appnLocalEnTgEntry 9 } appnLocalEnTgConnCost OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255." ::= { appnLocalEnTgEntry 10 } appnLocalEnTgByteCost OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Relative cost of transmitting a byte over this link. Range is from 0, which means no cost, to 255." ::= { appnLocalEnTgEntry 11 } appnLocalEnTgSecurity OBJECT-TYPE SYNTAX AppnTgSecurity -- Rsyntax INTEGER { -- nonsecure(1), -- publicSwitchedNetwork(32), -- undergroundCable(64), -- secureConduit(96), -- guardedConduit(128), -- encrypted(160), -- guardedRadiation(192) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Administratively assigned security level of this TG." ::= { appnLocalEnTgEntry 12 } appnLocalEnTgDelay OBJECT-TYPE SYNTAX AppnTgDelay -- Rsyntax OCTET STRING(SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "Administratively assigned delay associated with this TG." ::= { appnLocalEnTgEntry 13 } appnLocalEnTgUsr1 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "First user-defined TG characteristic for this TG. This is an administratively assigned value associated with the TG." ::= { appnLocalEnTgEntry 14 } appnLocalEnTgUsr2 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Second user-defined TG characteristic for this TG. This is an administratively assigned value associated with the TG." ::= { appnLocalEnTgEntry 15 } appnLocalEnTgUsr3 OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Third user-defined TG characteristic for this TG. This is an administratively assigned value associated with the TG." ::= { appnLocalEnTgEntry 16 } appnLocalEnTgMltgLinkType OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates whether the transmission group is a multi-link TG. A TG that has been brought up as a multi-link TG is reported as one, even if it currently has only one link active." ::= { appnLocalEnTgEntry 17 } appnDirMaxCaches OBJECT-TYPE SYNTAX Gauge -- Units -- directory entries ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of cache entries allowed. This is an administratively assigned value." ::= { appnDirPerf 1 } appnDirCurCaches OBJECT-TYPE SYNTAX Gauge -- Units -- directory entries ACCESS read-only STATUS mandatory DESCRIPTION "Current number of cache entries." ::= { appnDirPerf 2 } appnDirCurHomeEntries OBJECT-TYPE SYNTAX Gauge -- Units -- directory entries ACCESS read-only STATUS mandatory DESCRIPTION "Current number of home entries." ::= { appnDirPerf 3 } appnDirRegEntries OBJECT-TYPE SYNTAX Gauge -- Units -- directory entries ACCESS read-only STATUS mandatory DESCRIPTION "Current number of registered entries." ::= { appnDirPerf 4 } appnDirInLocates OBJECT-TYPE SYNTAX AppnNodeCounter -- Rsyntax Counter -- Units -- Locate messages ACCESS read-only STATUS mandatory DESCRIPTION "Number of directed Locates received since the node was last reinitialized." ::= { appnDirPerf 5 } appnDirInBcastLocates OBJECT-TYPE SYNTAX AppnNodeCounter -- Rsyntax Counter -- Units -- Locate messages ACCESS read-only STATUS mandatory DESCRIPTION "Number of broadcast Locates received since the node was last reinitialized." ::= { appnDirPerf 6 } appnDirOutLocates OBJECT-TYPE SYNTAX AppnNodeCounter -- Rsyntax Counter -- Units -- Locate messages ACCESS read-only STATUS mandatory DESCRIPTION "Number of directed Locates sent since the node was last reinitialized." ::= { appnDirPerf 7 } appnDirOutBcastLocates OBJECT-TYPE SYNTAX AppnNodeCounter -- Rsyntax Counter -- Units -- Locate messages ACCESS read-only STATUS mandatory DESCRIPTION "Number of broadcast Locates sent since the node was last reinitialized." ::= { appnDirPerf 8 } appnDirNotFoundLocates OBJECT-TYPE SYNTAX AppnNodeCounter -- Rsyntax Counter -- Units -- Locate messages ACCESS read-only STATUS mandatory DESCRIPTION "Number of directed Locates returned with a 'not found' since the node was last reinitialized." ::= { appnDirPerf 9 } appnDirNotFoundBcastLocates OBJECT-TYPE SYNTAX AppnNodeCounter -- Rsyntax Counter -- Units -- Locate messages ACCESS read-only STATUS mandatory DESCRIPTION "Number of broadcast Locates returned with a 'not found' since the node was last reinitialized." ::= { appnDirPerf 10 } appnDirLocateOutstands OBJECT-TYPE SYNTAX Gauge -- Units -- Locate messages ACCESS read-only STATUS mandatory DESCRIPTION "Current number of outstanding Locates, both directed and broadcast. This value varies. A value of zero indicates that no Locates are unanswered." ::= { appnDirPerf 11 } appnDirTable OBJECT-TYPE SYNTAX SEQUENCE OF AppnDirEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing information about all known LUs." ::= { appnDir 2 } appnDirEntry OBJECT-TYPE SYNTAX AppnDirEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is indexed by the LU name." INDEX { appnDirLuName } ::= { appnDirTable 1 } AppnDirEntry ::= SEQUENCE { appnDirLuName DisplayString, appnDirNnServerName SnaControlPointName, appnDirLuOwnerName SnaControlPointName, appnDirLuLocation INTEGER, appnDirType INTEGER, appnDirApparentLuOwnerName DisplayString } appnDirLuName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..17)) -- Rsyntax OCTET STRING(SIZE(1..17)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Fully qualified network LU name in the domain of the serving network node. Entries take one of three forms: - Explicit entries do not contain the character '*'. - Partial wildcard entries have the form 'ccc*', where 'ccc' represents one to sixteen characters in a legal SNA LuName. - A full wildcard entry consists of the single character '*'" ::= { appnDirEntry 1 } appnDirNnServerName OBJECT-TYPE SYNTAX SnaControlPointName -- Rsyntax OCTET STRING(SIZE(3..17)) ACCESS read-only STATUS mandatory DESCRIPTION "Fully qualified control point (CP) name of the network node server. For unassociated end node entries, a zero-length string is returned." ::= { appnDirEntry 2 } appnDirLuOwnerName OBJECT-TYPE SYNTAX SnaControlPointName -- Rsyntax OCTET STRING(SIZE(3..17)) ACCESS read-only STATUS mandatory DESCRIPTION "Fully qualified CP name of the node at which the LU is located. This name is the same as the serving NN name when the LU is located at a network node. It is also the same as the fully qualified LU name when this is the control point LU for this node." ::= { appnDirEntry 3 } appnDirLuLocation OBJECT-TYPE SYNTAX INTEGER { local(1), domain(2), xdomain(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the location of the LU with respect to the local node." ::= { appnDirEntry 4 } appnDirType OBJECT-TYPE SYNTAX INTEGER { home(1), cache(2), registered(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Directory types are: 1 - Home The LU is in the domain of the local node, and the LU information has been configured at the local node. 2 - Cache The LU has previously been located by a broadcast search, and the location information has been saved. 3 - Registered The LU is at an end node that is in the domain of the local network node. Registered entries are registered by the served end node." ::= { appnDirEntry 5 } appnDirApparentLuOwnerName OBJECT-TYPE SYNTAX DisplayString(SIZE(0|3..17)) -- Rsyntax OCTET STRING(SIZE(0|3..17)) ACCESS read-only STATUS mandatory DESCRIPTION "Fully qualified CP name of the node at which the LU appears to be located. This object and the appnDirLuOwnerName object are related as follows: Implementations that support this object save in their directory database information about an LU's owning control point that was communicated in two control vectors: - an Associated Resource Entry (X'3C') CV with resource type X'00F4' (ENCP) - a Real Owning Control Point (X'4A') CV. The X'4A' CV is created by a branch network node to preserve the name of the real owning control point for an LU below the branch network node, before it overwrites this name with its own name in the X'3C' CV. The X'4A' CV is not present for LUs that are not below branch network nodes. If the information a node has about an LU's owning CP came only in a X'3C' CV, then the name from the X'3C' is returned in the appnDirLuOwnerName object, and a null string is returned in this object. If the information a node has about an LU's owning CP came in both X'3C' and X'4A' CVs, then the name from the X'4A' is returned in the appnDirLuOwnerName object, and the name from the X'3C' (which will be the branch network node's name) is returned in this object." ::= { appnDirEntry 6 } appnCosModeTable OBJECT-TYPE SYNTAX SEQUENCE OF AppnCosModeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table representing all of the defined mode names for this node. The table contains the matching COS name for each mode name." ::= { appnCos 1 } appnCosModeEntry OBJECT-TYPE SYNTAX AppnCosModeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is indexed by the mode name." INDEX { appnCosModeName } ::= { appnCosModeTable 1 } AppnCosModeEntry ::= SEQUENCE { appnCosModeName SnaModeName, appnCosModeCosName SnaClassOfServiceName } appnCosModeName OBJECT-TYPE SYNTAX SnaModeName -- Rsyntax OCTET STRING(SIZE(0..8)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Administratively assigned name for this mode." ::= { appnCosModeEntry 1 } appnCosModeCosName OBJECT-TYPE SYNTAX SnaClassOfServiceName -- Rsyntax OCTET STRING(SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Administratively assigned name for this class of service." ::= { appnCosModeEntry 2 } appnCosNameTable OBJECT-TYPE SYNTAX SEQUENCE OF AppnCosNameEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table mapping all of the defined class-of-service names for this node to their network transmission priorities." ::= { appnCos 2 } appnCosNameEntry OBJECT-TYPE SYNTAX AppnCosNameEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The COS name is the index to this table." INDEX { appnCosName } ::= { appnCosNameTable 1 } AppnCosNameEntry ::= SEQUENCE { appnCosName SnaClassOfServiceName, appnCosTransPriority INTEGER } appnCosName OBJECT-TYPE SYNTAX SnaClassOfServiceName -- Rsyntax OCTET STRING(SIZE(0..8)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Administratively assigned name for this class of service." ::= { appnCosNameEntry 1 } appnCosTransPriority OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3), network(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Transmission priority for this class of service: low(1) - (X'01'): low priority medium(2) - (X'02'): medium priority high(3) - (X'03'): high priority network(4) - (X'04'): network priority" ::= { appnCosNameEntry 2 } appnCosNodeRowTable OBJECT-TYPE SYNTAX SEQUENCE OF AppnCosNodeRowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all node-row information for all classes of service defined in this node." ::= { appnCos 3 } appnCosNodeRowEntry OBJECT-TYPE SYNTAX AppnCosNodeRowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A node entry for a given class of service." INDEX { appnCosNodeRowName, appnCosNodeRowIndex } ::= { appnCosNodeRowTable 1 } AppnCosNodeRowEntry ::= SEQUENCE { appnCosNodeRowName SnaClassOfServiceName, appnCosNodeRowIndex INTEGER, appnCosNodeRowWgt DisplayString, appnCosNodeRowResistMin INTEGER, appnCosNodeRowResistMax INTEGER, appnCosNodeRowMinCongestAllow INTEGER, appnCosNodeRowMaxCongestAllow INTEGER } appnCosNodeRowName OBJECT-TYPE SYNTAX SnaClassOfServiceName -- Rsyntax OCTET STRING(SIZE(0..8)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Administratively assigned name for this class of service." ::= { appnCosNodeRowEntry 1 } appnCosNodeRowIndex OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "Subindex under appnCosNodeRowName, corresponding to a row in the node table for the class of service identified in appnCosNodeRowName. For each class of service, this subindex orders rows in the appnCosNodeRowTable in the same order as that used for route calculation in the APPN node." ::= { appnCosNodeRowEntry 2 } appnCosNodeRowWgt OBJECT-TYPE SYNTAX DisplayString(SIZE(1..64)) -- Rsyntax OCTET STRING(SIZE(1..64)) ACCESS read-only STATUS mandatory DESCRIPTION "Weight to be associated with the nodes that fit the criteria specified by this node row. This value can either be a character representation of an integer, or a formula for calculating the weight." ::= { appnCosNodeRowEntry 3 } appnCosNodeRowResistMin OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Minimum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing." ::= { appnCosNodeRowEntry 4 } appnCosNodeRowResistMax OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Maximum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing." ::= { appnCosNodeRowEntry 5 } appnCosNodeRowMinCongestAllow OBJECT-TYPE SYNTAX INTEGER(0..1) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether low congestion will be tolerated. This object and appnCosNodeRowMaxCongestAllow together delineate a range of acceptable congestion states for a node. For the ordered pair (minimum congestion allowed, maximum congestion allowed), the values are interpreted as follows: - (0,0): only low congestion is acceptable - (0,1): either low or high congestion is acceptable - (1,1): only high congestion is acceptable. Note that the combination (1,0) is not defined, since it would identify a range whose lower bound was high congestion and whose upper bound was low congestion." ::= { appnCosNodeRowEntry 6 } appnCosNodeRowMaxCongestAllow OBJECT-TYPE SYNTAX INTEGER(0..1) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether low congestion will be tolerated. This object and appnCosNodeRowMinCongestAllow together delineate a range of acceptable congestion states for a node. For the ordered pair (minimum congestion allowed, maximum congestion allowed), the values are interpreted as follows: - (0,0): only low congestion is acceptable - (0,1): either low or high congestion is acceptable - (1,1): only high congestion is acceptable. Note that the combination (1,0) is not defined, since it would identify a range whose lower bound was high congestion and whose upper bound was low congestion." ::= { appnCosNodeRowEntry 7 } appnCosTgRowTable OBJECT-TYPE SYNTAX SEQUENCE OF AppnCosTgRowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing all the TG-row information for all classes of service defined in this node." ::= { appnCos 4 } appnCosTgRowEntry OBJECT-TYPE SYNTAX AppnCosTgRowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A TG entry for a given class of service." INDEX { appnCosTgRowName, appnCosTgRowIndex } ::= { appnCosTgRowTable 1 } AppnCosTgRowEntry ::= SEQUENCE { appnCosTgRowName SnaClassOfServiceName, appnCosTgRowIndex INTEGER, appnCosTgRowWgt DisplayString, appnCosTgRowEffCapMin AppnTgEffectiveCapacity, appnCosTgRowEffCapMax AppnTgEffectiveCapacity, appnCosTgRowConnCostMin INTEGER, appnCosTgRowConnCostMax INTEGER, appnCosTgRowByteCostMin INTEGER, appnCosTgRowByteCostMax INTEGER, appnCosTgRowSecurityMin AppnTgSecurity, appnCosTgRowSecurityMax AppnTgSecurity, appnCosTgRowDelayMin AppnTgDelay, appnCosTgRowDelayMax AppnTgDelay, appnCosTgRowUsr1Min INTEGER, appnCosTgRowUsr1Max INTEGER, appnCosTgRowUsr2Min INTEGER, appnCosTgRowUsr2Max INTEGER, appnCosTgRowUsr3Min INTEGER, appnCosTgRowUsr3Max INTEGER } appnCosTgRowName OBJECT-TYPE SYNTAX SnaClassOfServiceName -- Rsyntax OCTET STRING(SIZE(0..8)) ACCESS not-accessible STATUS mandatory DESCRIPTION "Administratively assigned name for this class of service." ::= { appnCosTgRowEntry 1 } appnCosTgRowIndex OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "Subindex under appnCosTgRowName, corresponding to a row in the TG table for the class of service identified in appnCosTgRowName. For each class of service, this subindex orders rows in the appnCosTgRowTable in the same order as that used for route calculation in the APPN node." ::= { appnCosTgRowEntry 2 } appnCosTgRowWgt OBJECT-TYPE SYNTAX DisplayString(SIZE(1..64)) -- Rsyntax OCTET STRING(SIZE(1..64)) ACCESS read-only STATUS mandatory DESCRIPTION "Weight to be associated with the TGs that fit the criteria specified by this TG row. This value can either be a character representation of an integer, or a formula for calculating the weight." ::= { appnCosTgRowEntry 3 } appnCosTgRowEffCapMin OBJECT-TYPE SYNTAX AppnTgEffectiveCapacity -- Rsyntax OCTET STRING(SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "Minimum acceptable capacity for this class of service." ::= { appnCosTgRowEntry 4 } appnCosTgRowEffCapMax OBJECT-TYPE SYNTAX AppnTgEffectiveCapacity -- Rsyntax OCTET STRING(SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "Maximum acceptable capacity for this class of service." ::= { appnCosTgRowEntry 5 } appnCosTgRowConnCostMin OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Minimum acceptable cost per connect time for this class of service. Cost per connect time: a value representing the relative cost per unit of time to use this TG. Range is from 0, which means no cost, to 255." ::= { appnCosTgRowEntry 6 } appnCosTgRowConnCostMax OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Maximum acceptable cost per connect time for this class of service. Cost per connect time: a value representing the relative cost per unit of time to use this TG. Range is from 0, which means no cost, to 255." ::= { appnCosTgRowEntry 7 } appnCosTgRowByteCostMin OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Minimum acceptable cost per byte transmitted for this class of service. Cost per byte transmitted: a value representing the relative cost per unit of time to use this TG. Range is from 0, which means no cost, to 255." ::= { appnCosTgRowEntry 8 } appnCosTgRowByteCostMax OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Maximum acceptable cost per byte transmitted for this class of service. Cost per byte transmitted: a value representing the relative cost of transmitting a byte over this TG. Range is from 0, which means no cost, to 255." ::= { appnCosTgRowEntry 9 } appnCosTgRowSecurityMin OBJECT-TYPE SYNTAX AppnTgSecurity -- Rsyntax INTEGER { -- nonsecure(1), -- publicSwitchedNetwork(32), -- undergroundCable(64), -- secureConduit(96), -- guardedConduit(128), -- encrypted(160), -- guardedRadiation(192) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Minimum acceptable security for this class of service." ::= { appnCosTgRowEntry 10 } appnCosTgRowSecurityMax OBJECT-TYPE SYNTAX AppnTgSecurity -- Rsyntax INTEGER { -- nonsecure(1), -- publicSwitchedNetwork(32), -- undergroundCable(64), -- secureConduit(96), -- guardedConduit(128), -- encrypted(160), -- guardedRadiation(192) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Maximum acceptable security for this class of service." ::= { appnCosTgRowEntry 11 } appnCosTgRowDelayMin OBJECT-TYPE SYNTAX AppnTgDelay -- Rsyntax OCTET STRING(SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "Minimum acceptable propagation delay for this class of service." ::= { appnCosTgRowEntry 12 } appnCosTgRowDelayMax OBJECT-TYPE SYNTAX AppnTgDelay -- Rsyntax OCTET STRING(SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "Maximum acceptable propagation delay for this class of service." ::= { appnCosTgRowEntry 13 } appnCosTgRowUsr1Min OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Minimum acceptable value for this user-defined characteristic." ::= { appnCosTgRowEntry 14 } appnCosTgRowUsr1Max OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Maximum acceptable value for this user-defined characteristic." ::= { appnCosTgRowEntry 15 } appnCosTgRowUsr2Min OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Minimum acceptable value for this user-defined characteristic." ::= { appnCosTgRowEntry 16 } appnCosTgRowUsr2Max OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Maximum acceptable value for this user-defined characteristic." ::= { appnCosTgRowEntry 17 } appnCosTgRowUsr3Min OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Minimum acceptable value for this user-defined characteristic." ::= { appnCosTgRowEntry 18 } appnCosTgRowUsr3Max OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Maximum acceptable value for this user-defined characteristic." ::= { appnCosTgRowEntry 19 } appnIsInGlobeCtrAdminStatus OBJECT-TYPE SYNTAX INTEGER { notActive(1), active(2), ready(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Object by which a Management Station can deactivate or activate capture of intermediate-session counts and names, by setting the value to notActive(1) or active(2), respectively. The value ready(3) is returned on GET operations until a SET has been processed; after that the value received on the most recent SET is returned. The counts referred to here are the eight objects in the AppnIsInTable, from appnIsInP2SFmdPius through appnIsInS2PNonFmdBytes. The names are the four objects in this table, from appnIsInPriLuName through appnIsInCosName. Setting this object to the following values has the following effects: notActive(1) stop collecting count data. If a count is queried, it returns the value 0. Collection of names may, but need not be, disabled. active(2) start collecting count data. If it is supported, collection of names is enabled." ::= { appnIsInGlobal 1 } appnIsInGlobeCtrOperStatus OBJECT-TYPE SYNTAX INTEGER { notActive(1), active(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether or not the intermediate session counts are active. The counts referred to here are the eight objects in the AppnIsInTable, from appnIsInP2SFmdPius through appnIsInS2PNonFmdBytes. These eight counts are of type Unsigned32 rather than Counter32 because when this object enters the notActive state, either because a Management Station has set appnInInGlobeCtrAdminStatus to notActive or because of a locally-initiated transition, the counts are all reset to 0. The values for this object are: notActive(1): collection of counts is not active; if it is queried, a count returns the value 0. active(2): collection of counts is active." ::= { appnIsInGlobal 2 } appnIsInGlobeCtrStatusTime OBJECT-TYPE SYNTAX TimeTicks -- Units -- hundredths of a second ACCESS read-only STATUS mandatory DESCRIPTION "The time since the appnIsInGlobeCtrOperStatus object last changed, measured in hundredths of a second. This time can be used to identify when this change occurred in relation to other events in the agent, such as the last time the APPN node was reinitialized." ::= { appnIsInGlobal 3 } appnIsInGlobeRscv OBJECT-TYPE SYNTAX INTEGER { notActive(1), active(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the current route selection control vector (RSCV) collection option in effect, and allows a Management Station to change the option. The values for this object are: notActive(1): collection of route selection control vectors is not active. active(2): collection of route selection control vectors is active." ::= { appnIsInGlobal 4 } appnIsInGlobeRscvTime OBJECT-TYPE SYNTAX TimeTicks -- Units -- hundredths of a second ACCESS read-only STATUS mandatory DESCRIPTION "The time since the appnIsInGlobeRscv object last changed, measured in hundredths of a second. This time can be used to identify when this change occurred in relation to other events in the agent, such as the last time the APPN node was reinitialized." ::= { appnIsInGlobal 5 } appnIsInGlobeActSess OBJECT-TYPE SYNTAX Gauge -- Units -- sessions ACCESS read-only STATUS mandatory DESCRIPTION "The number of currently active intermediate sessions." ::= { appnIsInGlobal 6 } appnIsInGlobeHprBfActSess OBJECT-TYPE SYNTAX Gauge -- Units -- sessions ACCESS read-only STATUS mandatory DESCRIPTION "The number of currently active HPR intermediate sessions." ::= { appnIsInGlobal 7 } appnIsInTable OBJECT-TYPE SYNTAX SEQUENCE OF AppnIsInEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Intermediate Session Information Table" ::= { appnSessIntermediate 2 } appnIsInEntry OBJECT-TYPE SYNTAX AppnIsInEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry of Intermediate Session Information Table." INDEX { appnIsInFqCpName, appnIsInPcid } ::= { appnIsInTable 1 } AppnIsInEntry ::= SEQUENCE { appnIsInFqCpName SnaControlPointName, appnIsInPcid OCTET STRING, appnIsInSessState INTEGER, appnIsInPriLuName DisplayString, appnIsInSecLuName DisplayString, appnIsInModeName SnaModeName, appnIsInCosName SnaClassOfServiceName, appnIsInTransPriority INTEGER, appnIsInSessType INTEGER, appnIsInSessUpTime TimeTicks, appnIsInCtrUpTime TimeTicks, appnIsInP2SFmdPius Gauge, appnIsInS2PFmdPius Gauge, appnIsInP2SNonFmdPius Gauge, appnIsInS2PNonFmdPius Gauge, appnIsInP2SFmdBytes Gauge, appnIsInS2PFmdBytes Gauge, appnIsInP2SNonFmdBytes Gauge, appnIsInS2PNonFmdBytes Gauge, appnIsInPsAdjCpName SnaControlPointName, appnIsInPsAdjTgNum INTEGER, appnIsInPsSendMaxBtuSize INTEGER, appnIsInPsSendPacingType INTEGER, appnIsInPsSendRpc Gauge, appnIsInPsSendNxWndwSize Gauge, appnIsInPsRecvPacingType INTEGER, appnIsInPsRecvRpc Gauge, appnIsInPsRecvNxWndwSize Gauge, appnIsInSsAdjCpName SnaControlPointName, appnIsInSsAdjTgNum INTEGER, appnIsInSsSendMaxBtuSize INTEGER, appnIsInSsSendPacingType INTEGER, appnIsInSsSendRpc Gauge, appnIsInSsSendNxWndwSize Gauge, appnIsInSsRecvPacingType INTEGER, appnIsInSsRecvRpc Gauge, appnIsInSsRecvNxWndwSize Gauge, appnIsInRouteInfo OCTET STRING, appnIsInRtpNceId OCTET STRING, appnIsInRtpTcid OCTET STRING } appnIsInFqCpName OBJECT-TYPE SYNTAX SnaControlPointName -- Rsyntax OCTET STRING(SIZE(3..17)) ACCESS not-accessible STATUS mandatory DESCRIPTION "The network-qualified control point name of the node at which the session and PCID originated. For APPN and LEN nodes, this is either CP name of the APPN node at which the origin LU is located or the CP name of the NN serving the LEN node at which the origin LU is located. For resources served by a dependent LU requester (DLUR), it is the name of the owning system services control point (SSCP)." ::= { appnIsInEntry 1 } appnIsInPcid OBJECT-TYPE SYNTAX OCTET STRING(SIZE(8)) ACCESS not-accessible STATUS mandatory DESCRIPTION "The procedure correlation identifier (PCID) of a session. It is an 8-byte value assigned by the primary LU." ::= { appnIsInEntry 2 } appnIsInSessState OBJECT-TYPE SYNTAX INTEGER { inactive(1), pendactive(2), active(3), pendinact(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the state of the session: inactive(1) - session is inactive pendactive(2) - session is pending active active(3) - session is active pendinact(4) - session is pending inactive Active sessions can be deactivated by setting this object to inactive(1)." ::= { appnIsInEntry 3 } appnIsInPriLuName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..17)) -- Rsyntax OCTET STRING(SIZE(0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "The primary LU name of the session. A zero-length string indicates that this name is not available." ::= { appnIsInEntry 4 } appnIsInSecLuName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..17)) -- Rsyntax OCTET STRING(SIZE(0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "The secondary LU name of the session. A zero-length string indicates that this name is not available." ::= { appnIsInEntry 5 } appnIsInModeName OBJECT-TYPE SYNTAX SnaModeName -- Rsyntax OCTET STRING(SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The mode name used for this session." ::= { appnIsInEntry 6 } appnIsInCosName OBJECT-TYPE SYNTAX SnaClassOfServiceName -- Rsyntax OCTET STRING(SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The Class of Service (COS) name used for this session." ::= { appnIsInEntry 7 } appnIsInTransPriority OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3), network(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Transmission priority for this class of service. Values are: low(1) - (X'01'): low priority medium(2) - (X'02'): medium priority high(3) - (X'03'): high priority network(4) - (X'04'): network priority" ::= { appnIsInEntry 8 } appnIsInSessType OBJECT-TYPE SYNTAX INTEGER { unknown(1), lu62(2), lu0thru3(3), lu62dlur(4), lu0thru3dlur(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of intermediate session. Defined values are unknown The session type is not known. lu62 A session between LUs of type 6.2 (as indicated by the LU type in Bind) lu0thru3 A session between LUs of type 0, 1, 2, or 3 (as indicated by the LU type in Bind) lu62dlur A session between LUs of type 6.2 (as indicated by the LU type in Bind). One of the LUs is a dependent LU supported by the dependent LU requester (DLUR) function at this node. lu0thru3dlur A session between LUs of type 0, 1, 2, or 3 (as indicated by the LU type in Bind) One of the LUs is a dependent LU supported by the dependent LU requester (DLUR) function at this node." ::= { appnIsInEntry 9 } appnIsInSessUpTime OBJECT-TYPE SYNTAX TimeTicks -- Units -- hundredths of a second ACCESS read-only STATUS mandatory DESCRIPTION "Length of time the session has been active, measured in hundredths of a second." ::= { appnIsInEntry 10 } appnIsInCtrUpTime OBJECT-TYPE SYNTAX TimeTicks -- Units -- hundredths of a second ACCESS read-only STATUS mandatory DESCRIPTION "Length of time the session counters have been active, measured in hundredths of a second." ::= { appnIsInEntry 11 } appnIsInP2SFmdPius OBJECT-TYPE SYNTAX Gauge -- Units -- path information units (PIUs) ACCESS read-only STATUS mandatory DESCRIPTION "Number of function management data (FMD) path information units (PIUs) sent from the Primary LU to the Secondary LU since the counts were last activated." ::= { appnIsInEntry 12 } appnIsInS2PFmdPius OBJECT-TYPE SYNTAX Gauge -- Units -- path information units (PIUs) ACCESS read-only STATUS mandatory DESCRIPTION "Number of FMD PIUs sent from the Secondary LU to the Primary LU since the counts were last activated." ::= { appnIsInEntry 13 } appnIsInP2SNonFmdPius OBJECT-TYPE SYNTAX Gauge -- Units -- path information units (PIUs) ACCESS read-only STATUS mandatory DESCRIPTION "Number of non-FMD PIUs sent from the Primary LU to the Secondary LU since the counts were last activated." ::= { appnIsInEntry 14 } appnIsInS2PNonFmdPius OBJECT-TYPE SYNTAX Gauge -- Units -- path information units (PIUs) ACCESS read-only STATUS mandatory DESCRIPTION "Number of non-FMD PIUs sent from the Secondary LU to the Primary LU since the counts were last activated." ::= { appnIsInEntry 15 } appnIsInP2SFmdBytes OBJECT-TYPE SYNTAX Gauge -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "Number of FMD bytes sent from the Primary LU to the Secondary LU since the counts were last activated." ::= { appnIsInEntry 16 } appnIsInS2PFmdBytes OBJECT-TYPE SYNTAX Gauge -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "Number of FMD bytes sent from the Secondary LU to the Primary LU since the counts were last activated." ::= { appnIsInEntry 17 } appnIsInP2SNonFmdBytes OBJECT-TYPE SYNTAX Gauge -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "Number of non-FMD bytes sent from the Primary LU to the Secondary LU since the counts were last activated." ::= { appnIsInEntry 18 } appnIsInS2PNonFmdBytes OBJECT-TYPE SYNTAX Gauge -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "Number of non-FMD bytes sent from the Secondary LU to the Primary LU since the counts were last activated." ::= { appnIsInEntry 19 } appnIsInPsAdjCpName OBJECT-TYPE SYNTAX SnaControlPointName -- Rsyntax OCTET STRING(SIZE(3..17)) ACCESS read-only STATUS mandatory DESCRIPTION "The primary stage adjacent CP name of this session. If the session stage traverses an RTP connection, the CP name of the remote RTP endpoint is returned." ::= { appnIsInEntry 20 } appnIsInPsAdjTgNum OBJECT-TYPE SYNTAX INTEGER(0..300) ACCESS read-only STATUS mandatory DESCRIPTION "The primary stage adjacent transmission group (TG) number associated with this session. If the session stage traverses an RTP connection, the value 256 is returned. Values between 257 and 300 are available for other possible TG 'stand-ins' that may be added to APPN in the future." ::= { appnIsInEntry 21 } appnIsInPsSendMaxBtuSize OBJECT-TYPE SYNTAX INTEGER(99..32767) -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "The primary stage maximum basic transmission unit (BTU) size for sending data." ::= { appnIsInEntry 22 } appnIsInPsSendPacingType OBJECT-TYPE SYNTAX INTEGER { fixed(1), adaptive(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The primary stage type of pacing being used for sending data." ::= { appnIsInEntry 23 } appnIsInPsSendRpc OBJECT-TYPE SYNTAX Gauge -- Units -- message units (MUs) ACCESS read-only STATUS mandatory DESCRIPTION "The primary stage send residual pace count. This represents the primary stage number of message units (MUs) that can still be sent in the current session window." ::= { appnIsInEntry 24 } appnIsInPsSendNxWndwSize OBJECT-TYPE SYNTAX Gauge -- Units -- message units (MUs) ACCESS read-only STATUS mandatory DESCRIPTION "The primary stage size of the next window which will be used to send data." ::= { appnIsInEntry 25 } appnIsInPsRecvPacingType OBJECT-TYPE SYNTAX INTEGER { fixed(1), adaptive(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The primary stage type of pacing being used for receiving data." ::= { appnIsInEntry 26 } appnIsInPsRecvRpc OBJECT-TYPE SYNTAX Gauge -- Units -- message units (MUs) ACCESS read-only STATUS mandatory DESCRIPTION "The primary stage receive residual pace count. This represents the primary stage number of message units (MUs) that can still be received in the current session window." ::= { appnIsInEntry 27 } appnIsInPsRecvNxWndwSize OBJECT-TYPE SYNTAX Gauge -- Units -- message units (MUs) ACCESS read-only STATUS mandatory DESCRIPTION "The primary stage size of the next window which will be used to receive data." ::= { appnIsInEntry 28 } appnIsInSsAdjCpName OBJECT-TYPE SYNTAX SnaControlPointName -- Rsyntax OCTET STRING(SIZE(3..17)) ACCESS read-only STATUS mandatory DESCRIPTION "The secondary stage adjacent CP name of this session. If the session stage traverses an RTP connection, the CP name of the remote RTP endpoint is returned." ::= { appnIsInEntry 29 } appnIsInSsAdjTgNum OBJECT-TYPE SYNTAX INTEGER(0..300) ACCESS read-only STATUS mandatory DESCRIPTION "The secondary stage adjacent transmission group (TG) number associated with this session. If the session stage traverses an RTP connection, the value 256 is returned. Values between 257 and 300 are available for other possible TG 'stand-ins' that may be added to APPN in the future." ::= { appnIsInEntry 30 } appnIsInSsSendMaxBtuSize OBJECT-TYPE SYNTAX INTEGER(99..32767) -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "The secondary stage maximum basic transmission unit (BTU) size for sending data." ::= { appnIsInEntry 31 } appnIsInSsSendPacingType OBJECT-TYPE SYNTAX INTEGER { fixed(1), adaptive(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The secondary stage type of pacing being used for sending data." ::= { appnIsInEntry 32 } appnIsInSsSendRpc OBJECT-TYPE SYNTAX Gauge -- Units -- message units (MUs) ACCESS read-only STATUS mandatory DESCRIPTION "The secondary stage send residual pace count. This represents the secondary stage number of message units (MUs) that can still be sent in the current session window." ::= { appnIsInEntry 33 } appnIsInSsSendNxWndwSize OBJECT-TYPE SYNTAX Gauge -- Units -- message units (MUs) ACCESS read-only STATUS mandatory DESCRIPTION "The secondary stage size of the next window which will be used to send data." ::= { appnIsInEntry 34 } appnIsInSsRecvPacingType OBJECT-TYPE SYNTAX INTEGER { fixed(1), adaptive(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The secondary stage type of pacing being used for receiving data." ::= { appnIsInEntry 35 } appnIsInSsRecvRpc OBJECT-TYPE SYNTAX Gauge -- Units -- message units (MUs) ACCESS read-only STATUS mandatory DESCRIPTION "The secondary stage receive residual pace count. This represents the secondary stage number of message units (MUs) that can still be received in the current session window." ::= { appnIsInEntry 36 } appnIsInSsRecvNxWndwSize OBJECT-TYPE SYNTAX Gauge -- Units -- message units (MUs) ACCESS read-only STATUS mandatory DESCRIPTION "The secondary stage size of the next window which will be used to receive data." ::= { appnIsInEntry 37 } appnIsInRouteInfo OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The route selection control vector (RSCV X'2B') used for this session. It is present for APPN nodes; but is not present for LEN nodes. The format of this vector is described in SNA Formats. If no RSCV is available, a zero-length string is returned." ::= { appnIsInEntry 38 } appnIsInRtpNceId OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The HPR local Network Connection Endpoint of the session." ::= { appnIsInEntry 39 } appnIsInRtpTcid OBJECT-TYPE SYNTAX OCTET STRING(SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "The RTP connection local TCID of the session." ::= { appnIsInEntry 40 } appnIsRtpTable OBJECT-TYPE SYNTAX SEQUENCE OF AppnIsRtpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table indicating how many ISR sessions are transported by each RTP connection." ::= { appnSessIntermediate 3 } appnIsRtpEntry OBJECT-TYPE SYNTAX AppnIsRtpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry of Intermediate Session RTP Table." INDEX { appnIsRtpNceId, appnIsRtpTcid } ::= { appnIsRtpTable 1 } AppnIsRtpEntry ::= SEQUENCE { appnIsRtpNceId OCTET STRING, appnIsRtpTcid OCTET STRING, appnIsRtpSessions Gauge } appnIsRtpNceId OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..8)) ACCESS not-accessible STATUS mandatory DESCRIPTION "The local Network Connection Endpoint of the RTP connection." ::= { appnIsRtpEntry 1 } appnIsRtpTcid OBJECT-TYPE SYNTAX OCTET STRING(SIZE(8)) ACCESS not-accessible STATUS mandatory DESCRIPTION "The local TCID of the RTP connection." ::= { appnIsRtpEntry 2 } appnIsRtpSessions OBJECT-TYPE SYNTAX Gauge -- Units -- sessions ACCESS read-only STATUS mandatory DESCRIPTION "The number of intermediate sessions using this RTP connection." ::= { appnIsRtpEntry 3 } alertIdNumber OBJECT-TYPE SYNTAX OCTET STRING(SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "A 32-bit SNA Management Services (SNA/MS) Alert ID Number, as specified in SNA/MS Formats." ::= { appnTraps 2 } affectedObject OBJECT-TYPE SYNTAX VariablePointer -- Rsyntax OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "The MIB object associated with the Alert condition, if there is an object associated with it. If no associated object can be identified, the value 0.0 is passed in the trap." ::= { appnTraps 3 } appnNodeMibVersion OBJECT-TYPE SYNTAX DisplayString(SIZE(11)) -- Rsyntax OCTET STRING(SIZE(11)) ACCESS read-only STATUS deprecated DESCRIPTION "The value of LAST-UPDATED from this module's MODULE-IDENTITY macro. This object gives a Management Station an easy way of determining the level of the MIB supported by an agent. Since this object incorporates the Year 2000-unfriendly 2-digit year specified in SMI for the LAST-UPDATED field, and since it was not found to be particularly useful, it has been deprecated. No replacement object has been defined." ::= { appnGeneralInfoAndCaps 2 } alertTrap TRAP-TYPE --?? Non-reverse mappable trap ENTERPRISE appnTraps VARIABLES { alertIdNumber, affectedObject } -- Status -- mandatory DESCRIPTION "This trap carries a 32-bit SNA Management Services (SNA/MS) Alert ID Number, as specified in SNA/MS Formats." ::= 1 appnGeneralConfGroup2 OBJECT IDENTIFIER ::= { appnGroups 26 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing the instrumentation of -- APPN general information and capabilities. -- objects -- appnNodeCpName, appnNodeId, appnNodeType, appnNodeUpTime, -- appnNodeParallelTg, appnNodeAdaptiveBindPacing, -- appnNodeHprSupport, appnNodeCounterDisconTime, -- appnNodeLsCounterType, appnNodeBrNn appnPortConfGroup OBJECT IDENTIFIER ::= { appnGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing the instrumentation of -- APPN port information. -- objects -- appnPortCommand, appnPortOperState, appnPortDlcType, -- appnPortPortType, appnPortSIMRIM, appnPortLsRole, -- appnPortNegotLs, appnPortDynamicLinkSupport, -- appnPortMaxRcvBtuSize, appnPortMaxIframeWindow, -- appnPortDefLsGoodXids, appnPortDefLsBadXids, -- appnPortDynLsGoodXids, appnPortDynLsBadXids, appnPortSpecific, -- appnPortDlcLocalAddr, appnPortCounterDisconTime appnLinkConfGroup2 OBJECT IDENTIFIER ::= { appnGroups 27 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing the instrumentation of -- APPN link information. -- objects -- appnLsCommand, appnLsOperState, appnLsPortName, appnLsDlcType, -- appnLsDynamic, appnLsAdjCpName, appnLsAdjNodeType, -- appnLsTgNum, appnLsLimResource, appnLsActOnDemand, -- appnLsMigration, appnLsPartnerNodeId, -- appnLsCpCpSessionSupport, appnLsMaxSendBtuSize, -- appnLsInXidBytes, appnLsInMsgBytes, appnLsInXidFrames, -- appnLsInMsgFrames, appnLsOutXidBytes, appnLsOutMsgBytes, -- appnLsOutXidFrames, appnLsOutMsgFrames, appnLsEchoRsps, -- appnLsCurrentDelay, appnLsMaxDelay, appnLsMinDelay, -- appnLsMaxDelayTime, appnLsGoodXids, appnLsBadXids, -- appnLsSpecific, appnLsActiveTime, appnLsCurrentStateTime, -- appnLsHprSup, appnLsLocalAddr, appnLsRemoteAddr, -- appnLsRemoteLsName, appnLsStatusTime, appnLsStatusLsName, -- appnLsStatusCpName, appnLsStatusPartnerId, appnLsStatusTgNum, -- appnLsStatusGeneralSense, appnLsStatusRetry, -- appnLsStatusEndSense, appnLsStatusXidLocalSense, -- appnLsStatusXidRemoteSense, appnLsStatusXidByteInError, -- appnLsStatusXidBitInError, appnLsStatusDlcType, -- appnLsStatusLocalAddr, appnLsStatusRemoteAddr, -- appnLsCounterDisconTime, appnLsMltgMember appnLocalTgConfGroup2 OBJECT IDENTIFIER ::= { appnGroups 28 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing the instrumentation of -- APPN local TG information. -- objects -- appnLocalTgDestVirtual, appnLocalTgDlcData, -- appnLocalTgPortName, appnLocalTgQuiescing, -- appnLocalTgOperational, appnLocalTgCpCpSession, -- appnLocalTgEffCap, appnLocalTgConnCost, appnLocalTgByteCost, -- appnLocalTgSecurity, appnLocalTgDelay, appnLocalTgUsr1, -- appnLocalTgUsr2, appnLocalTgUsr3, appnLocalTgHprSup, -- appnLocalTgIntersubnet, appnLocalTgMltgLinkType appnDirTableConfGroup2 OBJECT IDENTIFIER ::= { appnGroups 29 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing the instrumentation of the -- APPN directory database. -- objects -- appnDirNnServerName, appnDirLuOwnerName, appnDirLuLocation, -- appnDirType, appnDirApparentLuOwnerName appnNnUniqueConfGroup OBJECT IDENTIFIER ::= { appnGroups 6 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing instrumentation unique -- to APPN network nodes. -- objects -- appnNodeNnCentralDirectory, appnNodeNnTreeCache, -- appnNodeNnRouteAddResist, appnNodeNnIsr, appnNodeNnFrsn, -- appnNodeNnPeriBorderSup, appnNodeNnInterchangeSup, -- appnNodeNnExteBorderSup, appnNodeNnSafeStoreFreq, -- appnNodeNnRsn, appnNodeNnCongested, appnNodeNnIsrDepleted, -- appnNodeNnQuiescing, appnNodeNnGateway appnEnUniqueConfGroup OBJECT IDENTIFIER ::= { appnGroups 7 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing instrumentation for -- APPN end nodes. Some of these objects also appear in the -- instrumentation for a branch network node. -- objects -- appnNodeEnModeCosMap, appnNodeEnNnServer, appnNodeEnLuSearch appnVrnConfGroup OBJECT IDENTIFIER ::= { appnGroups 8 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- An object providing the instrumentation for virtual -- routing node support in an APPN node. -- objects -- appnVrnPortName appnNnTopoConfGroup2 OBJECT IDENTIFIER ::= { appnGroups 30 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The appnNnTopoConfGroup is mandatory only for network -- nodes. -- objects -- appnNnTopoMaxNodes, appnNnTopoCurNumNodes, -- appnNnTopoNodePurges, appnNnTopoTgPurges, -- appnNnTopoTotalTduWars, appnNnNodeFREntryTimeLeft, -- appnNnNodeFRType, appnNnNodeFRRsn, appnNnNodeFRRouteAddResist, -- appnNnNodeFRCongested, appnNnNodeFRIsrDepleted, -- appnNnNodeFRQuiescing, appnNnNodeFRGateway, -- appnNnNodeFRCentralDirectory, appnNnNodeFRIsr, -- appnNnNodeFRGarbageCollect, appnNnNodeFRHprSupport, -- appnNnNodeFRPeriBorderSup, appnNnNodeFRInterchangeSup, -- appnNnNodeFRExteBorderSup, appnNnNodeFRBranchAwareness, -- appnNnTgFREntryTimeLeft, appnNnTgFRDestVirtual, -- appnNnTgFRDlcData, appnNnTgFRRsn, appnNnTgFROperational, -- appnNnTgFRQuiescing, appnNnTgFRCpCpSession, appnNnTgFREffCap, -- appnNnTgFRConnCost, appnNnTgFRByteCost, appnNnTgFRSecurity, -- appnNnTgFRDelay, appnNnTgFRUsr1, appnNnTgFRUsr2, -- appnNnTgFRUsr3, appnNnTgFRGarbageCollect, -- appnNnTgFRSubareaNum, appnNnTgFRHprSup, -- appnNnTgFRDestHprTrans, appnNnTgFRTypeIndicator, -- appnNnTgFRIntersubnet, appnNnTgFRMltgLinkType, -- appnNnTgFRBranchTg appnLocalEnTopoConfGroup2 OBJECT IDENTIFIER ::= { appnGroups 31 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing the instrumentation -- of the information that a network node possesses about -- the end nodes directly attached to it. -- objects -- appnLocalEnTgEntryTimeLeft, appnLocalEnTgDestVirtual, -- appnLocalEnTgDlcData, appnLocalEnTgOperational, -- appnLocalEnTgCpCpSession, appnLocalEnTgEffCap, -- appnLocalEnTgConnCost, appnLocalEnTgByteCost, -- appnLocalEnTgSecurity, appnLocalEnTgDelay, appnLocalEnTgUsr1, -- appnLocalEnTgUsr2, appnLocalEnTgUsr3, -- appnLocalEnTgMltgLinkType appnLocalDirPerfConfGroup OBJECT IDENTIFIER ::= { appnGroups 11 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The appnLocalDirPerfConfGroup is mandatory only for APPN -- network nodes and end nodes. -- objects -- appnDirMaxCaches, appnDirCurCaches, appnDirCurHomeEntries, -- appnDirRegEntries, appnDirInLocates, appnDirInBcastLocates, -- appnDirOutLocates, appnDirOutBcastLocates, -- appnDirNotFoundLocates, appnDirNotFoundBcastLocates, -- appnDirLocateOutstands appnCosConfGroup OBJECT IDENTIFIER ::= { appnGroups 12 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The appnCosConfGroup is mandatory only for APPN network -- nodes and end nodes. -- objects -- appnCosModeCosName, appnCosTransPriority, appnCosNodeRowWgt, -- appnCosNodeRowResistMin, appnCosNodeRowResistMax, -- appnCosNodeRowMinCongestAllow, appnCosNodeRowMaxCongestAllow, -- appnCosTgRowWgt, appnCosTgRowEffCapMin, appnCosTgRowEffCapMax, -- appnCosTgRowConnCostMin, appnCosTgRowConnCostMax, -- appnCosTgRowByteCostMin, appnCosTgRowByteCostMax, -- appnCosTgRowSecurityMin, appnCosTgRowSecurityMax, -- appnCosTgRowDelayMin, appnCosTgRowDelayMax, -- appnCosTgRowUsr1Min, appnCosTgRowUsr1Max, appnCosTgRowUsr2Min, -- appnCosTgRowUsr2Max, appnCosTgRowUsr3Min, appnCosTgRowUsr3Max appnIntSessConfGroup OBJECT IDENTIFIER ::= { appnGroups 13 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The appnIntSessConfGroup is mandatory only for network -- nodes. -- objects -- appnIsInGlobeCtrAdminStatus, appnIsInGlobeCtrOperStatus, -- appnIsInGlobeCtrStatusTime, appnIsInGlobeRscv, -- appnIsInGlobeRscvTime, appnIsInGlobeActSess, -- appnIsInSessState, appnIsInPriLuName, appnIsInSecLuName, -- appnIsInModeName, appnIsInCosName, appnIsInTransPriority, -- appnIsInSessType, appnIsInSessUpTime, appnIsInCtrUpTime, -- appnIsInP2SFmdPius, appnIsInS2PFmdPius, appnIsInP2SNonFmdPius, -- appnIsInS2PNonFmdPius, appnIsInP2SFmdBytes, -- appnIsInS2PFmdBytes, appnIsInP2SNonFmdBytes, -- appnIsInS2PNonFmdBytes, appnIsInPsAdjCpName, -- appnIsInPsAdjTgNum, appnIsInPsSendMaxBtuSize, -- appnIsInPsSendPacingType, appnIsInPsSendRpc, -- appnIsInPsSendNxWndwSize, appnIsInPsRecvPacingType, -- appnIsInPsRecvRpc, appnIsInPsRecvNxWndwSize, -- appnIsInSsAdjCpName, appnIsInSsAdjTgNum, -- appnIsInSsSendMaxBtuSize, appnIsInSsSendPacingType, -- appnIsInSsSendRpc, appnIsInSsSendNxWndwSize, -- appnIsInSsRecvPacingType, appnIsInSsRecvRpc, -- appnIsInSsRecvNxWndwSize, appnIsInRouteInfo appnHprBaseConfGroup OBJECT IDENTIFIER ::= { appnGroups 14 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The appnHprBaseConfGroup is mandatory only for nodes that -- implement the HPR base (APPN option set 1400). -- objects -- appnNodeHprIntRteSetups, appnNodeHprIntRteRejects, -- appnLsErrRecoSup, appnLsForAnrLabel, appnLsRevAnrLabel appnHprRtpConfGroup OBJECT IDENTIFIER ::= { appnGroups 15 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The appnHprRtpConfGroup is mandatory only for nodes that -- implement the HPR RTP tower (APPN option set 1401). -- objects -- appnNodeMaxSessPerRtpConn, appnNodeHprOrgRteSetups, -- appnNodeHprOrgRteRejects, appnNodeHprEndRteSetups, -- appnNodeHprEndRteRejects, appnLsBfNceId appnHprCtrlFlowsRtpConfGroup OBJECT IDENTIFIER ::= { appnGroups 16 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The appnHprCtrlFlowsRtpConfGroup is mandatory only for nodes -- that implement the HPR Control Flows over RTP tower (APPN -- option set 1402). -- objects -- appnLsCpCpNceId, appnLsRouteNceId appnHprBfConfGroup OBJECT IDENTIFIER ::= { appnGroups 17 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The appnHprBfConfGroup is mandatory only for nodes that -- implement the APPN/HPR boundary function. -- objects -- appnIsInGlobeHprBfActSess, appnIsInRtpNceId, appnIsInRtpTcid, -- appnIsRtpSessions appnTrapConfGroup OBJECT IDENTIFIER ::= { appnGroups 18 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The appnTrapConfGroup is optional for all APPN nodes. Nodes -- implementing this group shall also implement the -- appnTrapNotifGroup. -- objects -- alertIdNumber, affectedObject appnBrNnConfGroup OBJECT IDENTIFIER ::= { appnGroups 20 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing instrumentation for -- branch network nodes. Some of these objects also appear -- in the instrumentation for an end node. -- -- Note: A branch network node always returns endNode(2) -- as the value of the appnNodeType object from the -- appnGeneralConfGroup2 conformance group. -- objects -- appnNodeEnNnServer, appnNodeEnLuSearch, -- appnLocalTgBranchLinkType appnGeneralConfGroup OBJECT IDENTIFIER ::= { appnGroups 1 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- A collection of objects providing the instrumentation of -- APPN general information and capabilities. -- -- This RFC 2155-level group was deprecated when the -- appnNodeMibVersion object was removed and the -- appnNodeLsCounterType and appnNodeBrNn objects were added. -- objects -- appnNodeCpName, appnNodeMibVersion, appnNodeId, appnNodeType, -- appnNodeUpTime, appnNodeParallelTg, -- appnNodeAdaptiveBindPacing, appnNodeHprSupport, -- appnNodeCounterDisconTime appnLinkConfGroup OBJECT IDENTIFIER ::= { appnGroups 3 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- A collection of objects providing the instrumentation of -- APPN link information. -- -- This RFC 2155-level group was deprecated when the -- appnLsMltgMember object was added. -- objects -- appnLsCommand, appnLsOperState, appnLsPortName, appnLsDlcType, -- appnLsDynamic, appnLsAdjCpName, appnLsAdjNodeType, -- appnLsTgNum, appnLsLimResource, appnLsActOnDemand, -- appnLsMigration, appnLsPartnerNodeId, -- appnLsCpCpSessionSupport, appnLsMaxSendBtuSize, -- appnLsInXidBytes, appnLsInMsgBytes, appnLsInXidFrames, -- appnLsInMsgFrames, appnLsOutXidBytes, appnLsOutMsgBytes, -- appnLsOutXidFrames, appnLsOutMsgFrames, appnLsEchoRsps, -- appnLsCurrentDelay, appnLsMaxDelay, appnLsMinDelay, -- appnLsMaxDelayTime, appnLsGoodXids, appnLsBadXids, -- appnLsSpecific, appnLsActiveTime, appnLsCurrentStateTime, -- appnLsHprSup, appnLsLocalAddr, appnLsRemoteAddr, -- appnLsRemoteLsName, appnLsStatusTime, appnLsStatusLsName, -- appnLsStatusCpName, appnLsStatusPartnerId, appnLsStatusTgNum, -- appnLsStatusGeneralSense, appnLsStatusRetry, -- appnLsStatusEndSense, appnLsStatusXidLocalSense, -- appnLsStatusXidRemoteSense, appnLsStatusXidByteInError, -- appnLsStatusXidBitInError, appnLsStatusDlcType, -- appnLsStatusLocalAddr, appnLsStatusRemoteAddr, -- appnLsCounterDisconTime appnLocalTgConfGroup OBJECT IDENTIFIER ::= { appnGroups 4 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- A collection of objects providing the instrumentation of -- APPN local TG information. -- -- This RFC 2155-level group was deprecated when the -- appnLocalTgMltgLinkType object was added. -- objects -- appnLocalTgDestVirtual, appnLocalTgDlcData, -- appnLocalTgPortName, appnLocalTgQuiescing, -- appnLocalTgOperational, appnLocalTgCpCpSession, -- appnLocalTgEffCap, appnLocalTgConnCost, appnLocalTgByteCost, -- appnLocalTgSecurity, appnLocalTgDelay, appnLocalTgUsr1, -- appnLocalTgUsr2, appnLocalTgUsr3, appnLocalTgHprSup, -- appnLocalTgIntersubnet appnDirTableConfGroup OBJECT IDENTIFIER ::= { appnGroups 5 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- A collection of objects providing the instrumentation of the -- APPN directory database. -- -- This RFC 2155-level group was deprecated when the -- appnDirApparentLuOwnerName object was added. -- objects -- appnDirNnServerName, appnDirLuOwnerName, appnDirLuLocation, -- appnDirType appnNnTopoConfGroup OBJECT IDENTIFIER ::= { appnGroups 9 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- The appnNnTopoConfGroup is mandatory only for network -- nodes. -- -- This RFC 2155-level group was deprecated when the -- appnNnNodeFRBranchAwareness, appnNnTgFRMltgLinkType, and -- appnNnFRBranchTg objects were added. -- objects -- appnNnTopoMaxNodes, appnNnTopoCurNumNodes, -- appnNnTopoNodePurges, appnNnTopoTgPurges, -- appnNnTopoTotalTduWars, appnNnNodeFREntryTimeLeft, -- appnNnNodeFRType, appnNnNodeFRRsn, appnNnNodeFRRouteAddResist, -- appnNnNodeFRCongested, appnNnNodeFRIsrDepleted, -- appnNnNodeFRQuiescing, appnNnNodeFRGateway, -- appnNnNodeFRCentralDirectory, appnNnNodeFRIsr, -- appnNnNodeFRGarbageCollect, appnNnNodeFRHprSupport, -- appnNnNodeFRPeriBorderSup, appnNnNodeFRInterchangeSup, -- appnNnNodeFRExteBorderSup, appnNnTgFREntryTimeLeft, -- appnNnTgFRDestVirtual, appnNnTgFRDlcData, appnNnTgFRRsn, -- appnNnTgFROperational, appnNnTgFRQuiescing, -- appnNnTgFRCpCpSession, appnNnTgFREffCap, appnNnTgFRConnCost, -- appnNnTgFRByteCost, appnNnTgFRSecurity, appnNnTgFRDelay, -- appnNnTgFRUsr1, appnNnTgFRUsr2, appnNnTgFRUsr3, -- appnNnTgFRGarbageCollect, appnNnTgFRSubareaNum, -- appnNnTgFRHprSup, appnNnTgFRDestHprTrans, -- appnNnTgFRTypeIndicator, appnNnTgFRIntersubnet appnLocalEnTopoConfGroup OBJECT IDENTIFIER ::= { appnGroups 10 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- The appnLocalEnTopoConfGroup is mandatory only for network -- nodes. -- -- This RFC 2155-level group was deprecated when the -- appnLocalEnTgMltgLinkType object was added. -- objects -- appnLocalEnTgEntryTimeLeft, appnLocalEnTgDestVirtual, -- appnLocalEnTgDlcData, appnLocalEnTgOperational, -- appnLocalEnTgCpCpSession, appnLocalEnTgEffCap, -- appnLocalEnTgConnCost, appnLocalEnTgByteCost, -- appnLocalEnTgSecurity, appnLocalEnTgDelay, appnLocalEnTgUsr1, -- appnLocalEnTgUsr2, appnLocalEnTgUsr3 appnTrapNotifGroup OBJECT IDENTIFIER ::= { appnGroups 19 } -- NOTIFICATION-GROUP -- Status -- mandatory -- Descr -- The appnTrapNotifGroup is optional for all APPN nodes. -- Nodes implementing this group shall also implement the -- appnTrapConfGroup. -- notifications -- alertTrap appnCompliance2 OBJECT IDENTIFIER ::= { appnCompliances 3 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for the SNMPv2 entities that -- implement the APPN MIB. -- -- In the descriptions for the conditionally mandatory groups that -- follow, the branch network node is treated as a third node type, -- parallel to network node and end node. This is not how branch -- network nodes are treated in the base APPN architecture, but it -- increases clarity here to do it. -- Module -- >>current<< -- MandGroup -- appnGeneralConfGroup2 -- MandGroup -- appnPortConfGroup -- MandGroup -- appnLinkConfGroup2 -- MandGroup -- appnLocalTgConfGroup2 -- MandGroup -- appnDirTableConfGroup2 -- OptGroup -- appnNnUniqueConfGroup -- OptGroup -- appnEnUniqueConfGroup -- OptGroup -- appnVrnConfGroup -- OptGroup -- appnNnTopoConfGroup2 -- OptGroup -- appnLocalEnTopoConfGroup2 -- OptGroup -- appnLocalDirPerfConfGroup -- OptGroup -- appnCosConfGroup -- OptGroup -- appnIntSessConfGroup -- OptGroup -- appnHprBaseConfGroup -- OptGroup -- appnHprRtpConfGroup -- OptGroup -- appnHprCtrlFlowsRtpConfGroup -- OptGroup -- appnHprBfConfGroup -- OptGroup -- appnTrapConfGroup -- OptGroup -- appnTrapNotifGroup -- OptGroup -- appnBrNnConfGroup appnCompliance OBJECT IDENTIFIER ::= { appnCompliances 1 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The compliance statement for the SNMPv2 entities that -- implement the APPN MIB. -- -- This is the compliance statement for the RFC 2155-level version -- of the APPN MIB. It was deprecated as new objects were added -- to the MIB for MLTG, branch network node, and other extensions -- to the APPN architecture. -- Module -- >>current<< -- MandGroup -- appnGeneralConfGroup -- MandGroup -- appnPortConfGroup -- MandGroup -- appnLinkConfGroup -- MandGroup -- appnLocalTgConfGroup -- MandGroup -- appnDirTableConfGroup -- OptGroup -- appnNnUniqueConfGroup -- OptGroup -- appnEnUniqueConfGroup -- OptGroup -- appnVrnConfGroup -- OptGroup -- appnNnTopoConfGroup -- OptGroup -- appnLocalEnTopoConfGroup -- OptGroup -- appnLocalDirPerfConfGroup -- OptGroup -- appnCosConfGroup -- OptGroup -- appnIntSessConfGroup -- OptGroup -- appnHprBaseConfGroup -- OptGroup -- appnHprRtpConfGroup -- OptGroup -- appnHprCtrlFlowsRtpConfGroup -- OptGroup -- appnHprBfConfGroup -- OptGroup -- appnTrapConfGroup -- OptGroup -- appnTrapNotifGroup END