-- MIB created 6/25/99 12:56:44, by
--   SMIC (the next generation) version 1.6.29, November 22, 1994.

CISCO-ACCESS-ENVMON-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-ACCESS-ENVMON-MIB.my"

IMPORTS
    OBJECT-TYPE
            FROM RFC-1212
    TRAP-TYPE
            FROM RFC-1215
    ciscoEnvMonSupplyStatusEntry, ciscoEnvMonTemperatureStatusDescr, 
    ciscoEnvMonTemperatureState, ciscoEnvMonVoltageStatusDescr, 
    ciscoEnvMonVoltageState, ciscoEnvMonSupplyStatusIndex
            FROM CISCO-ENVMON-MIB
    ciscoMgmt
            FROM CISCO-SMI;

ciscoAccessEnvMonMIB OBJECT IDENTIFIER ::= { ciscoMgmt 61 }
-- MODULE-IDENTITY
--  LastUpdated
--    9808050000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--           Cisco Systems
--            Customer Service
--    
--    Postal: 170 W. Tasman Drive
--            San Jose, CA  95134
--            USA
--    
--    Tel: +1 800 553-NETS
--    
--    E-mail: cs-snmp@cisco.com
--  Descr
--    The MIB module to describe the additional status of
--     the Environmental Monitor on those Cisco Access devices
--     which support one.
--  RevDate
--    9808050000Z
--  RevDescr
--    Rename the enumerated values for caemSupplyFailedComponent 
--     and add fan, overvoltage failure events to it. 
--     Add caemVoltageNotification.

caemObjects     OBJECT IDENTIFIER ::= { ciscoAccessEnvMonMIB 1 }
caemMIBNotificationPrefix OBJECT IDENTIFIER ::= { ciscoAccessEnvMonMIB 2 }
caemMIBNotifications OBJECT IDENTIFIER ::= { caemMIBNotificationPrefix 0 }
caemConformance OBJECT IDENTIFIER ::= { ciscoAccessEnvMonMIB 3 }
caemCompliances OBJECT IDENTIFIER ::= { caemConformance 1 }
caemGroups      OBJECT IDENTIFIER ::= { caemConformance 2 }

caemSupplyStatusTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CaemSupplyStatusEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table contains the additional power supply information
         that are not covered in the ciscoEnvMonSupplyStatusTable of
         CISCO-ENVMON-MIB.                                "
    ::= { caemObjects 1 }

caemSupplyStatusEntry OBJECT-TYPE
    SYNTAX CaemSupplyStatusEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Additional information about the failure component or location
         in the power Supply beyond that provided by Cisco Environmental
         Monitor MIB's ciscoEnvMonSupplyStatusEntry."
    INDEX { ciscoEnvMonSupplyStatusIndex }
-- Augments ciscoEnvMonSupplyStatusEntry FROM CISCO-ENVMON-MIB
    ::= { caemSupplyStatusTable 1 }

CaemSupplyStatusEntry ::= SEQUENCE {
    caemSupplyFailedComponent INTEGER
    }

caemSupplyFailedComponent OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        inputVoltage(2),
        dcOutputVoltage(3),
        thermal(4),
        multiple(5),
        fan(6),
        overvoltage(7)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The failure component of the power supply being instrumented.
         none            - No failure.
         inputVoltage    - Input power lost in one of the power supplies
         dcOutputVoltage - DC output voltage lost in one of the power supplies
         thermal         - Power supply thermal failure.
         multiple        - Multiple failures.
         fan             - Fan failure
         overvoltage     - Over voltage."
    ::= { caemSupplyStatusEntry 1 }

caemTemperatureNotification TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE caemMIBNotificationPrefix
    VARIABLES {
        ciscoEnvMonTemperatureStatusDescr, 
        ciscoEnvMonTemperatureState }
--  Status
--    mandatory
    DESCRIPTION
        "A caemTemperatureNotification is sent if the over temperature
         condition is detected in the managed system.
         This is a replacement for the ciscoEnvMonTemperatureNotification 
         trap because the information 'ciscoEnvMonTemperatureStatusValue' 
         required by the trap is not available in the managed system."
    ::= 1

caemVoltageNotification TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE caemMIBNotificationPrefix
    VARIABLES {
        ciscoEnvMonVoltageStatusDescr, ciscoEnvMonVoltageState }
--  Status
--    mandatory
    DESCRIPTION
        "A caemVoltageNotification is sent if the over voltage 
         condition is detected and ciscoEnvMonVoltageState is not set
         to 'notPresent' in the managed system.
         This is a replacement for the ciscoEnvMonVoltageNotification 
         trap because the information 'ciscoEnvMonVoltageStatusValue' 
         required by the trap is not available in the managed system."
    ::= 2

caemGroup OBJECT IDENTIFIER ::= { caemGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects providing the additional Environmental
--     Monitor information beyond that provided by
--     Cisco Environmental Monitor MIB.
--  objects
--    caemSupplyFailedComponent

caemCompliance OBJECT IDENTIFIER ::= { caemCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for entities which implement
--     the Cisco Environmental Monitor Supplemental MIB.
--  Module
--    >>current<<
--   MandGroup
--    caemGroup


END