-- MIB created 9/10/96 15:50:31, by
--   SMIC (the next generation) version 1.6.29, November 22, 1994.

CISCO-ATM-ADDR-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-ATM-ADDR-MIB.my"

IMPORTS
    OBJECT-TYPE
            FROM RFC-1212
    RowStatus
            FROM SNMPv2-TC-v1
    ifIndex
            FROM IF-MIB
    ciscoExperiment
            FROM CISCO-SMI;

ciscoAtmAddrMIB OBJECT IDENTIFIER ::= { ciscoExperiment 12 }
-- MODULE-IDENTITY
--  LastUpdated
--    9605060000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--           Cisco Systems
--     Customer Service
--    
--    Postal: 170 W Tasman Drive
--     San Jose, CA  95134
--     USA
--    
--       Tel: +1 800 553-NETS
--    
--    E-mail: cs-atm@cisco.com
--  Descr
--    ATM address MIB
--  RevDate
--    9605060000Z
--  RevDescr
--    Initial version of this MIB module.

ciscoAtmAddrMIBObjects OBJECT IDENTIFIER ::= { ciscoAtmAddrMIB 1 }
ciscoAtmIfAdminAddrMIBConformance OBJECT IDENTIFIER ::= { ciscoAtmAddrMIB 3 }
ciscoAtmIfAdminAddrMIBCompliances OBJECT IDENTIFIER ::= { ciscoAtmIfAdminAddrMIBConformance 1 }
ciscoAtmIfAdminAddrMIBGroups OBJECT IDENTIFIER ::= { ciscoAtmIfAdminAddrMIBConformance 2 }

AtmAddr ::= OCTET STRING(SIZE(0 | 8 | 13 | 20))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    The ATM address used by the network entity.  The
--    address types are: no address (0 octets), E.164 (8
--    octets), network prefix (13 octets), and NSAP (20
--    octets).  Note: The E.164 address is encoded in
--    BCD format.

ciscoAtmIfAdminAddrTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CiscoAtmIfAdminAddrEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains an address list on a per interface
        basis.  This table only applies to switches or networks
        and only for interfaces that have more than one address
        assigned."
    ::= { ciscoAtmAddrMIBObjects 1 }

ciscoAtmIfAdminAddrEntry OBJECT-TYPE
    SYNTAX CiscoAtmIfAdminAddrEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry in the CiscoAtmIfAdminAddrTable."
    INDEX { ifIndex, ciscoAtmIfAdminAddrAddress }
    ::= { ciscoAtmIfAdminAddrTable 1 }

CiscoAtmIfAdminAddrEntry ::= SEQUENCE {
    ciscoAtmIfAdminAddrAddress AtmAddr,
    ciscoAtmIfAdminAddrRowStatus RowStatus
    }

ciscoAtmIfAdminAddrAddress OBJECT-TYPE
    SYNTAX AtmAddr
--    Rsyntax OCTET STRING(SIZE(0 | 8 | 13 | 20))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A valid address for a given switch or network
         interface."
    ::= { ciscoAtmIfAdminAddrEntry 1 }

ciscoAtmIfAdminAddrRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object is used to create and delete rows in the
        atmIfAdminAddrTable."
    ::= { ciscoAtmIfAdminAddrEntry 2 }

ciscoAtmIfAdminAddrMIBGroup OBJECT IDENTIFIER ::= { ciscoAtmIfAdminAddrMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    This object is used to create and delete rows in the
--     atmIfAdminAddrTable.
--  objects
--    ciscoAtmIfAdminAddrRowStatus

ciscoAtmIfAdminAddrMIBCompliance OBJECT IDENTIFIER ::= { ciscoAtmIfAdminAddrMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for the Cisco ATM address
--     group.
--  Module
--    >>current<<
--   MandGroup
--    ciscoAtmIfAdminAddrMIBGroup


END