-- MIB created 9/10/96 15:50:37, by
--   SMIC (the next generation) version 1.6.29, November 22, 1994.

CISCO-ATM-SWITCH-ADDR-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-ATM-SWITCH-ADDR-MIB.my"

IMPORTS
    Integer32
            FROM SNMPv2-SMI-v1
    OBJECT-TYPE
            FROM RFC-1212
    RowStatus
            FROM SNMPv2-TC-v1
    ciscoMgmt
            FROM CISCO-SMI;

ciscoAtmSwAddrMIB OBJECT IDENTIFIER ::= { ciscoMgmt 51 }
-- MODULE-IDENTITY
--  LastUpdated
--    9601100000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--           Cisco Systems
--     Customer Service
--    
--    Postal: 170 W Tasman Drive
--     San Jose, CA  95134
--     USA
--    
--       Tel: +1 800 553-NETS
--    
--    E-mail: cs-snmp@cisco.com
--  Descr
--    ATM Switch address MIB
--  RevDate
--    9601100000Z
--  RevDescr
--    Initial version of this MIB module.

ciscoAtmSwAddrMIBObjects OBJECT IDENTIFIER ::= { ciscoAtmSwAddrMIB 1 }
ciscoAtmSwAddrMIBConformance OBJECT IDENTIFIER ::= { ciscoAtmSwAddrMIB 3 }
ciscoAtmSwAddrMIBCompliances OBJECT IDENTIFIER ::= { ciscoAtmSwAddrMIBConformance 1 }
ciscoAtmSwAddrMIBGroups OBJECT IDENTIFIER ::= { ciscoAtmSwAddrMIBConformance 2 }

AtmAddr ::= OCTET STRING(SIZE(13 | 20))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    The ATM address used by the network entity.  The
--    address types are: network prefix (13 octets), and NSAP (20
--    octets).

ciscoAtmSwAddrTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CiscoAtmSwAddrEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains an address list on a per switch
        basis."
    ::= { ciscoAtmSwAddrMIBObjects 1 }

ciscoAtmSwAddrEntry OBJECT-TYPE
    SYNTAX CiscoAtmSwAddrEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry in the ciscoAtmSwAddrTable."
    INDEX { ciscoAtmSwAddrIndex }
    ::= { ciscoAtmSwAddrTable 1 }

CiscoAtmSwAddrEntry ::= SEQUENCE {
    ciscoAtmSwAddrIndex Integer32,
    ciscoAtmSwAddrAddress AtmAddr,
    ciscoAtmSwAddrRowStatus RowStatus
    }

ciscoAtmSwAddrIndex OBJECT-TYPE
    SYNTAX Integer32(1..65535)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A sequence number when address gets created.
        1 is the primary address. This is dense table and
        this index will be re-sequenced when a entry get
        deleted and it can only create new entry when append
        in the end of table."
    ::= { ciscoAtmSwAddrEntry 1 }

ciscoAtmSwAddrAddress OBJECT-TYPE
    SYNTAX AtmAddr
--    Rsyntax OCTET STRING(SIZE(13 | 20))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "A valid address for a given switch."
    ::= { ciscoAtmSwAddrEntry 2 }

ciscoAtmSwAddrRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object is used to create and delete rows in the
        ciscoAtmSwAddrTable."
    ::= { ciscoAtmSwAddrEntry 3 }

ciscoAtmSwAddrMIBGroup OBJECT IDENTIFIER ::= { ciscoAtmSwAddrMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  objects
--    ciscoAtmSwAddrAddress, ciscoAtmSwAddrRowStatus

ciscoAtmSwAddrMIBCompliance OBJECT IDENTIFIER ::= { ciscoAtmSwAddrMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for the Cisco ATM switch address
--     group.
--  Module
--    >>current<<


END