-- MIB file created 07-Aug-2002 10:53:25, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-ATM-SWITCH-FR-IWF-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-ATM-SWITCH-FR-IWF-MIB.my"
-- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T"

IMPORTS
    RowStatus, TimeStamp, TruthValue
            FROM SNMPv2-TC-v1
    ciscoMgmt
            FROM CISCO-SMI
--    Unsigned32
--            FROM CISCO-TC
    AtmTrafficDescrParamIndex
            FROM ATM-MIB
    ifIndex, InterfaceIndex
            FROM IF-MIB
    Counter, Gauge
            FROM RFC1155-SMI
    OBJECT-TYPE
            FROM RFC-1212;

ciscoAtmSwitchFrIwfMIB OBJECT IDENTIFIER ::= { ciscoMgmt 112 }
-- MODULE-IDENTITY
--  LastUpdated
--    200105200000Z
--  OrgName
--    Cisco Systems
--  ContactInfo
--    
--     Cisco Systems, Inc.
--     170 West Tasman Drive,
--     San Jose CA 95134-1706.
--     Phone: +1 408 526 5260
--     Email: cs-atm@cisco.com
--  Descr
--    A MIB module for managing Frame Relay to ATM interworking
--    connections, and Frame Relay to Frame Relay switched
--    connections via an ATM switching fabric, on a Cisco ATM 
--    switch.
--  RevDate
--    200105200000Z
--  RevDescr
--    Added objects casfVcSignalStandardCalledIe,
--    casfConfIfCledSpvcDeModeDef, 
--    casfConfIfCledSpvcClpModeDef.
--  RevDate
--    200002290000Z
--  RevDescr
--    New UPC values of 'tag' and 'drop' were added for IDSL 
--    support.
--  RevDate
--    9807090000Z
--  RevDescr
--    Initial version.

ciscoAtmSwitchFrIwfMIBObjects OBJECT IDENTIFIER ::= { ciscoAtmSwitchFrIwfMIB 1 }
casfFrTraffic   OBJECT IDENTIFIER ::= { ciscoAtmSwitchFrIwfMIBObjects 1 }
casfFrVC        OBJECT IDENTIFIER ::= { ciscoAtmSwitchFrIwfMIBObjects 2 }
casfFrInterface OBJECT IDENTIFIER ::= { ciscoAtmSwitchFrIwfMIBObjects 3 }
casfFrCounts    OBJECT IDENTIFIER ::= { ciscoAtmSwitchFrIwfMIBObjects 4 }
casfMapping     OBJECT IDENTIFIER ::= { ciscoAtmSwitchFrIwfMIBObjects 5 }
ciscoAtmSFrIwfMIBConformance OBJECT IDENTIFIER ::= { ciscoAtmSwitchFrIwfMIB 3 }
ciscoAtmSFrIwfMIBCompliances OBJECT IDENTIFIER ::= { ciscoAtmSFrIwfMIBConformance 1 }
ciscoAtmSFrIwfMIBGroups OBJECT IDENTIFIER ::= { ciscoAtmSFrIwfMIBConformance 2 }

CasfTrafficDescrRow ::= Gauge(1..2147483647)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Identifies an index into the casfTrafficDescrTable. The
--     value 0 signifies that no row has been identified.

DlciValue ::= INTEGER(0..4194303)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    A numerical value identifying a Data Link Connection
--    Identifier (DLCI) for a Frame Relay connection. The valid
--    range of values depends on the format of the address field
--    used, as described in ITU Recommendation Q.922. When a
--    2-octet address field is used, the value ranges from 0 to
--    1023.
--  Refer
--    ITU Recommendation Q.922, ISDN Data Link Layer
--           Specification For Frame Mode Bearer Services.

ConnectionKind ::= INTEGER {
        pvc(1),
        svcIncoming(2),
        svcOutgoing(3),
        spvcInitiator(4),
        spvcTarget(5)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    The kind of connection, distinguished by the use of call
--     control.

AtmAddr ::= OCTET STRING(SIZE(0..40))
-- TEXTUAL-CONVENTION
--  DspHint
--    1x
--  Status
--    mandatory
--  Descr
--    An ATM address. The semantics are implied by the
--    length. The address types are: - no address (0 octets)
--    - E.164 (8 octets) - NSAP (20 octets) In addition,
--    when subaddresses are used the AtmAddr may represent
--    the concatenation of address and subaddress. The
--    associated address types are: - E.164, E.164 (16
--    octets) - E.164, NSAP (28 octets) - NSAP, NSAP (40
--    octets) Address lengths other than defined in this
--    definition imply address types defined elsewhere.
--    Note: The E.164 address is encoded in BCD format.

casfTrafficDescrTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CasfTrafficDescrEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains a set of self-consistent Frame
         Relay traffic parameters. It is intended to be used to
         create Frame Relay to ATM interworking connections,
         hence a ATM traffic service category is also included.
        
        An entry in this table is associated with an
         equivalent entry in the ATM traffic descriptor table
         (atmTrafficDescrParamTable); the mapping is given by
         the object casfTrafficDescrAtmIndex. The agent will
         not permit deletion of the associated
         atmTrafficDescrEntry while the Frame Relay Traffic 
         Descriptor entry exists.
        
        When creating an entry in this table, if the value of
        casfTrafficDescrAtmIndex is specified, the following
        cases are possible:
        (a) if no corresponding row exists in
        atmTrafficDescrParamTable, the agent will create such
        a row with the given index value.
        (b) if a corresponding row does exist in
        atmTrafficDescrParamTable, the agent compares the
        parameter values in casfTrafficDescrEntry and the
        corresponding atmTrafficDescrParamEntry. If the two
        entries are not equivalent, an error is returned, and
        row creation fails.
        
        When creating an entry in this table, if the value of
        casfTrafficDescrAtmIndex is not specified, the agent
        will assign a value to this object so that it refers
        to an equivalent entry in the
        atmTrafficDescrParamTable. If such an equivalent
        entry does not already exist, the agent will create
        one.
        
        The agent creates rows in this table for use with
        signaled connections. These are called 'transient'
        rows - they disappear when the connection is torn
        down, and are not saved in non-volatile memory. By
        convention, transient rows usually use high-numbered
        index values.
        
        Entries can be deleted by setting the row status to
        destroy(6). The agent denies the request if the row
        is in use by existing connections."
    ::= { casfFrTraffic 1 }

casfTrafficDescrEntry OBJECT-TYPE
    SYNTAX CasfTrafficDescrEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Describes a traffic descriptor that is used by Frame
        Relay connections."
    INDEX { casfTrafficDescrIndex }
    ::= { casfTrafficDescrTable 1 }

CasfTrafficDescrEntry ::= SEQUENCE {
    casfTrafficDescrIndex CasfTrafficDescrRow,
    casfTrafficDescrCIR Gauge,
    casfTrafficDescrBc Gauge,
    casfTrafficDescrBe Gauge,
    casfTrafficDescrPIR Gauge,
    casfTrafficDescrServCategory INTEGER,
    casfTrafficDescrAtmIndex AtmTrafficDescrParamIndex,
    casfTrafficDescrRowStatus RowStatus
    }

casfTrafficDescrIndex OBJECT-TYPE
    SYNTAX CasfTrafficDescrRow
--    Rsyntax Gauge(1..2147483647)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Uniquely identifies a row in this table."
    ::= { casfTrafficDescrEntry 1 }

casfTrafficDescrCIR OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    bits/sec
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The value of the Committed Information Rate (CIR) parameter."
    ::= { casfTrafficDescrEntry 2 }

casfTrafficDescrBc OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    bits
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The value of the Committed Burst Size (Bc) parameter."
    ::= { casfTrafficDescrEntry 3 }

casfTrafficDescrBe OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    bits
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The value of the Excess Burst Size (Be) parameter."
    ::= { casfTrafficDescrEntry 4 }

casfTrafficDescrPIR OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    bits/sec
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The value of the Peak Information Rate (PIR) parameter."
    ::= { casfTrafficDescrEntry 5 }

casfTrafficDescrServCategory OBJECT-TYPE
    SYNTAX INTEGER {
        vbrNrt(1),
        abr(2),
        ubr(3),
        vbrRt(4)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The service category, as defined for ATM."
    REFERENCE
        "ATM Forum Traffic Management Specification,
                Version 4.0, af-tm-0056.000, June 1996."
    ::= { casfTrafficDescrEntry 6 }

casfTrafficDescrAtmIndex OBJECT-TYPE
    SYNTAX AtmTrafficDescrParamIndex
--    Rsyntax INTEGER
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The index of the equivalent entry in the
         atmTrafficDescrParamTable."
    ::= { casfTrafficDescrEntry 7 }

casfTrafficDescrRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Used to create, delete and modify this row.
        None of the columnar values (other than this one) can be 
        modified while the row is active."
    ::= { casfTrafficDescrEntry 8 }

casfVcEndptTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CasfVcEndptEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains information about Frame Relay
         end-points of FR-ATM interworking connections on the
         switch. When an entry is created in this table, the
         agent creates a corresponding entry in the
         atmVclTable of ATM-MIB, to represent the
         configuration on the internal ATM port. The mapping
         between an entry in this table, and the corresponding
         entry in the atmVclTable is shown in the
         casfFAMapTable and the casfAFMapTable.
        
        Entries can be created or deleted in this table by an
        NMS using the casfVcEndptRowStatus object. 
        
        To create a PVC connection end-point, the value of
        casfVcEndptConnKind must be 'pvc'.
        
        To create a soft VC initiator end-point, set the value of
        casfVcEndptConnKind to 'spvcInitiator', and specify
        the value of casfVcEndptSpvcRemoteAddr and
        casfVcEndptSpvcRemoteType. 
        
        If the value of casfVcEndptSpvcRemoteType is
        'frameRelay', you must also specify the value of
        casfVcEndptSpvcRemoteDlci. Activating the conceptual
        row will then cause the agent to attempt to establish
        a connection to the remote frame relay interface.
        
         If the value of casfVcEndptSpvcRemoteType is 'atm',
        you must specify the values of
        casfVcEndptSpvcRemoteVpi and
        casfVcEndptSpvcRemoteVci. Activating the conceptual row
        will then cause the agent to attempt to establish a
        connection to the remote ATM interface.
        
        The agent creates an entry in this table when an
        incoming signaling request causes a soft VC
        connection to be established with a local frame relay
        interface as the destination. The value of
        casfVcEndptConnKind in this case will be
        'spvcTarget'.  Such entries cannot be modified or
        deleted by network management. They will be deleted
        when the connection is removed by signaling."
    ::= { casfFrVC 1 }

casfVcEndptEntry OBJECT-TYPE
    SYNTAX CasfVcEndptEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Models a bidirectional Frame Relay VC end-point. The
              ifIndex identifies an ifTable entry for a Frame Relay 
        interface on this device."
    INDEX { ifIndex, casfVcEndptDlci }
    ::= { casfVcEndptTable 1 }

CasfVcEndptEntry ::= SEQUENCE {
    casfVcEndptDlci DlciValue,
    casfVcEndptRxTrafficDescrRow CasfTrafficDescrRow,
    casfVcEndptTxTrafficDescrRow CasfTrafficDescrRow,
    casfVcEndptRxNegTrafficDescrRow CasfTrafficDescrRow,
    casfVcEndptTxNegTrafficDescrRow CasfTrafficDescrRow,
    casfVcEndptConnKind ConnectionKind,
    casfVcEndptIwfType INTEGER,
    casfVcEndptClpMode INTEGER,
    casfVcEndptDeMode INTEGER,
    casfVcEndptEfciMode INTEGER,
    casfVcEndptUpcMode INTEGER,
    casfVcEndptSpvcRemoteAddr AtmAddr,
    casfVcEndptSpvcRemoteType INTEGER,
    casfVcEndptSpvcRemoteDlci DlciValue,
    casfVcEndptSpvcRemoteVpi INTEGER,
    casfVcEndptSpvcRemoteVci INTEGER,
    casfVcEndptCreationTime TimeStamp,
    casfVcEndptRcvdSigStatus INTEGER,
    casfVcEndptRowStatus RowStatus,
    casfVcSignalStandardCalledIe TruthValue
    }

casfVcEndptDlci OBJECT-TYPE
    SYNTAX DlciValue
--    Rsyntax INTEGER(0..4194303)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The value of the Data Link Connection Identifier (DLCI)
          which identifies this connection end-point."
    ::= { casfVcEndptEntry 1 }

casfVcEndptRxTrafficDescrRow OBJECT-TYPE
    SYNTAX CasfTrafficDescrRow
--    Rsyntax Gauge(1..2147483647)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Identifies the entry in the casfTrafficDescrTable
        which applies to the receive direction at this
        connection end-point.
        
        For connections that negotiate traffic parameters
        through signaling (e.g. ABR connections), this object
        points to the desired traffic parameters, while the
        object casfVcEndptRxNegTrafficDescrRow points to the
        negotiated traffic parameters, for the receive direction."
    ::= { casfVcEndptEntry 2 }

casfVcEndptTxTrafficDescrRow OBJECT-TYPE
    SYNTAX CasfTrafficDescrRow
--    Rsyntax Gauge(1..2147483647)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Identifies the entry in the casfTrafficDescrTable
        which applies to the transmit direction at this
        connection end-point.
        
        For connections that negotiate traffic parameters
        through signaling (e.g. ABR connections), this object
        points to the desired traffic parameters, while the
        object casfVcEndptTxNegTrafficDescrRow points to the
        negotiated traffic parameter, for the transmit direction."
    ::= { casfVcEndptEntry 3 }

casfVcEndptRxNegTrafficDescrRow OBJECT-TYPE
    SYNTAX CasfTrafficDescrRow
--    Rsyntax Gauge(1..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Identifies the entry in the casfTrafficDescrTable
        which contains negotiated traffic parameters applied
        to the receive direction of this connection
        end-point.  
        
        This object is not instantiated if this
        is not the calling side of a soft VC, or if there is
        no traffic negotiation."
    ::= { casfVcEndptEntry 4 }

casfVcEndptTxNegTrafficDescrRow OBJECT-TYPE
    SYNTAX CasfTrafficDescrRow
--    Rsyntax Gauge(1..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Identifies the entry in the casfTrafficDescrTable
        which contains negotiated traffic parameters applied
        to the transmit direction of this connection
        endpoint.
        
        This object is not instantiated if this is not the
        calling side of a soft VC, or if there is no traffic
        negotiation."
    ::= { casfVcEndptEntry 5 }

casfVcEndptConnKind OBJECT-TYPE
    SYNTAX ConnectionKind
--    Rsyntax INTEGER {
--        pvc(1),
--        svcIncoming(2),
--        svcOutgoing(3),
--        spvcInitiator(4),
--        spvcTarget(5)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The connection kind. The value can be set prior to
        the row becoming 'active'.
        
        To create a pvc connection endpoint, set this value to
        pvc(1).
        
        To create a soft VC connection endpoint, set this
        value to spvcInitiator(4), and specify the value of
        casfVcEndptSpvcRemoteAddr.
        
        The values svcIncoming(2), svcOutgoing(3), and
        spvcTarget(5) can not be written."
    DEFVAL { pvc }
    ::= { casfVcEndptEntry 6 }

casfVcEndptIwfType OBJECT-TYPE
    SYNTAX INTEGER {
        network(1),
        serviceTransparent(2),
        serviceTranslation(3),
        rfc1973(4)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The type of the interworking function. The value can
        be set prior to the row becoming 'active'."
    ::= { casfVcEndptEntry 7 }

casfVcEndptClpMode OBJECT-TYPE
    SYNTAX INTEGER {
        clpIfDe(1),
        clpIsZero(2),
        clpIsOne(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies how to map from Discard Eligibility (DE)
        bit on the Frame Relay side to Congestion Loss
        Priority (CLP) bit on the ATM side.
        
        For network interworking, clpIfDe(1) corresponds to
        Mode 1 as defined in FRF.5, section
        4.4.1. clpIsZero(2) and clpIsOne(3) correspond to
        Mode 2 as defined in FRF.5, section 4.4.1.
        
        For service interworking, clpIfDe(1) corresponds to
        Mode 1 as defined in FRF.8, section
        4.2.1. clpIsZero(2) and clpIsOne(3) correspond to
        Mode 2 as defined in FRF.8, section 4.2.1."
    ::= { casfVcEndptEntry 8 }

casfVcEndptDeMode OBJECT-TYPE
    SYNTAX INTEGER {
        deIfClpOrFrsscsDe(1),
        deIfFrsscsDe(2),
        deIfClp(3),
        deIsZero(4),
        deIsOne(5)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies how to map from Congestion Loss Priority
        (CLP) bit on the ATM side to Discard Eligibility (DE)
        bit on the Frame Relay side.
        
        See the Frame Relay Forum specifications FRF.5 and
        FRF.8 for definitions of Mode 1 and Mode 2.
        
        For network interworking, the valid values are:
        deIfClpOrFrsscsDe(1) -- Mode 1 of FRF.5 section 4.4.2
        deIfFrsscsDe(2) -- Mode 2 of FRF.5 section 4.4.2
        
        For service interworking, the valid values are:
        deIfClp(3) -- Mode 1 of FRF.8 section 4.2.2
        deIsZero(4) and deIsOne(5) -- Mode 2 of FRF.8 section 4.2.2"
    ::= { casfVcEndptEntry 9 }

casfVcEndptEfciMode OBJECT-TYPE
    SYNTAX INTEGER {
        efciIfFecn(1),
        efciIsZero(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies how to map from FECN field in the Frame
        Relay PDU to the EFCI field in ATM cells, in case of
        service interworking. This object does not apply to
        network interworking.
        
        efciIfFecn(1) and efciIsZero(2) correspond to Mode 1
        and Mode 2 (as defined in FRF.8, section 4.3.1.1),
        respectively."
    ::= { casfVcEndptEntry 10 }

casfVcEndptUpcMode OBJECT-TYPE
    SYNTAX INTEGER {
        pass(1),
        tagDrop(2),
        tag(3),
        drop(4)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the action taken by Usage Parameter Control
        (UPC) at the ingress port."
    ::= { casfVcEndptEntry 11 }

casfVcEndptSpvcRemoteAddr OBJECT-TYPE
    SYNTAX AtmAddr
--    Rsyntax OCTET STRING(SIZE(0..40))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The ATM address of the remote end of the soft VC.
        The value can be set prior to the row becoming
        'active', and if the value of casfVcEndptConnKind is
        spvcInitiator(4). The agent will return an
        inconsistentValue error on sets if the value of
        casfVcEndptConnKind is other than spvcInitiator(4).
        
        If the value of casfVcEndptConnKind spvcTarget(5), this
        object is initialized by the agent.
        
        This object is instantiated only if the value of
        casfVcEndptConnKind is spvcInitiator(4) or
        spvcTarget(5)."
    ::= { casfVcEndptEntry 12 }

casfVcEndptSpvcRemoteType OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        frameRelay(2),
        atm(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The type of the remote end of the soft VC. 
        
         This object is instantiated only if the value of
              casfVcEndptConnKind is spvcInitiator(4) or
              spvcTarget(5). The agent will return an
              inconsistentValue error on sets if the value of
              casfVcEndptConnKind is other than spvcInitiator(4) or
              spvcTarget(5)."
    ::= { casfVcEndptEntry 13 }

casfVcEndptSpvcRemoteDlci OBJECT-TYPE
    SYNTAX DlciValue
--    Rsyntax INTEGER(0..4194303)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The DLCI value to be used at the remote end of the
        soft VC.  The value can be set prior to the row
        becoming 'active', and if the value of
        casfVcEndptConnKind is spvcInitiator(4), and the value
        of casfVcEndptSpvcRemoteType is frameRelay(2).
        
        The object is instantiated only if the value of
        casfVcEndptSpvcRemoteType is frameRelay(2). The agent
        will return an inconsistentValue error on sets if the
        value of casfVcEndptSpvcRemoteType is other than 
              frameRelay(2)."
    ::= { casfVcEndptEntry 14 }

casfVcEndptSpvcRemoteVpi OBJECT-TYPE
    SYNTAX INTEGER(0..255)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The VPI value to be used at the remote end of the
        soft VC.  The value can be set prior to the row
        becoming 'active', and if the value of
        casfVcEndptConnKind is spvcInitiator(4), and the value
        of casfVcEndptSpvcRemoteType is atm(3).
        
        The object is instantiated only if the value of
        casfVcEndptSpvcRemoteType is atm(3). The agent will
        return an inconsistentValue error on sets if the value
        of casfVcEndptSpvcRemoteType is other than atm(3)."
    ::= { casfVcEndptEntry 15 }

casfVcEndptSpvcRemoteVci OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The VCI value to be used at the remote end of the
        soft VC.  The value can be set prior to the row
        becoming 'active', and if the value of
        casfVcEndptConnKind is spvcInitiator(4), and the value
        of casfVcEndptSpvcRemoteType is atm(3).
        
        The object is instantiated only if the value of
        casfVcEndptSpvcRemoteType is atm(3). The agent will
        return an inconsistentValue error on sets if the value
        of casfVcEndptSpvcRemoteType is other than atm(3)."
    ::= { casfVcEndptEntry 16 }

casfVcEndptCreationTime OBJECT-TYPE
    SYNTAX TimeStamp
--    Rsyntax TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The time when this row was created."
    ::= { casfVcEndptEntry 17 }

casfVcEndptRcvdSigStatus OBJECT-TYPE
    SYNTAX INTEGER {
        deleted(1),
        active(2),
        inactive(3),
        none(4)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The value of this object identifies the PVC status
        received via the local in-channel signaling
        procedures for this PVC end-point. This object is
        only pertinent for interfaces that perform the
        bidirectional procedures. For user-to-network network
        side procedures, the value of this object should be
        none(4)."
    REFERENCE
        " Q.933 Annex A.
        This object is a copy of frPVCEndptRcvdSigStatus from RFC1604."
    ::= { casfVcEndptEntry 18 }

casfVcEndptRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Used to create, modify or delete this row."
    ::= { casfVcEndptEntry 19 }

casfVcSignalStandardCalledIe OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies whether or not to signal the standard (from 
        the ATM-Forum PNNI Soft PVC Addendum) format of the 
        Called Soft PVC IE, as opposed to the proprietary 
        encoding we have used for the network-interworking 
        case to a frame-relay destination."
    REFERENCE
        " ATM Forum specification AF-CS-0127.000 for
        standard encoding of Soft PVC IE."
    DEFVAL { false }
    ::= { casfVcEndptEntry 20 }

casfFrLmiTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CasfFrLmiEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains frame relay Local Management
        Interface (LMI) parameters and counters.
        
        There is one entry for each frame relay
        interface. Entries come and go in this table as frame
        relay interfaces are created and deleted in the device."
    ::= { casfFrInterface 1 }

casfFrLmiEntry OBJECT-TYPE
    SYNTAX CasfFrLmiEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Frame relay LMI objects for a particular frame relay
        interface, which is identified by the ifIndex value in
        the INDEX clause."
    INDEX { ifIndex }
    ::= { casfFrLmiTable 1 }

CasfFrLmiEntry ::= SEQUENCE {
    casfFrLmiProtocol INTEGER,
    casfFrLmiType INTEGER,
    casfFrLmiUserN391 INTEGER,
    casfFrLmiUserN392 INTEGER,
    casfFrLmiUserN393 INTEGER,
    casfFrLmiUserT391 INTEGER,
    casfFrLmiNetN392 INTEGER,
    casfFrLmiNetN393 INTEGER,
    casfFrLmiNetT392 INTEGER,
    casfFrLmiEnquiryIns Counter,
    casfFrLmiEnquiryOuts Counter,
    casfFrLmiStatusIns Counter,
    casfFrLmiStatusOuts Counter,
    casfFrLmiStatusTimeouts Counter,
    casfFrLmiStatusEnqTimeouts Counter
    }

casfFrLmiProtocol OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        lmi(2),
        ansiT1617D(3),
        ansiT1617B(4),
        ccittQ933A(5)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Identifies the Local In-Channel Signaling Protocol
             that is used for this frame relay port."
    ::= { casfFrLmiEntry 1 }

casfFrLmiType OBJECT-TYPE
    SYNTAX INTEGER {
        dte(1),
        dce(2),
        nni(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Identifies the Local In-Channel Signaling Procedure
        that is used for this frame relay port. A dte performs
        only user-side procedures. A dce performs only
        network-side procedures. An nni performs bidirectional
        procedures."
    ::= { casfFrLmiEntry 2 }

casfFrLmiUserN391 OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Number of status enquiry intervals  that  pass
        before  issuance  of a full status enquiry mes-
        sage."
    REFERENCE
        "Draft American National  Standard  T1.617-1991,
        Section D.7 Counter N391."
    DEFVAL { 6 }
    ::= { casfFrLmiEntry 3 }

casfFrLmiUserN392 OBJECT-TYPE
    SYNTAX INTEGER(1..10)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The maximum number of unanswered Status Enquiries the
        device shall accept before declaring the interface
        down."
    REFERENCE
        "Draft American National  Standard  T1.617-1991,
        Section D.5.1 Counter N392."
    DEFVAL { 3 }
    ::= { casfFrLmiEntry 4 }

casfFrLmiUserN393 OBJECT-TYPE
    SYNTAX INTEGER(1..10)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The number of status polling intervals over which the
        error threshold is counted.  For example, if within
        N393 number of events the device receives N392 number
        of errors, the interface is marked as down."
    REFERENCE
        "Draft American National  Standard  T1.617-1991,
        Section D.5.2 Counter N393."
    DEFVAL { 4 }
    ::= { casfFrLmiEntry 5 }

casfFrLmiUserT391 OBJECT-TYPE
    SYNTAX INTEGER(5..30)
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The number of seconds between successive status
        enquiry messages."
    REFERENCE
        "Draft American National  Standard  T1.617-1991,
        Section D.7 Timer T391."
    DEFVAL { 10 }
    ::= { casfFrLmiEntry 6 }

casfFrLmiNetN392 OBJECT-TYPE
    SYNTAX INTEGER(1..10)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The value of the network-side  error threshold
        for this frame relay port."
    REFERENCE
        "Draft American National  Standard  T1.617-1991,
        Section D.7 Timer N392."
    DEFVAL { 3 }
    ::= { casfFrLmiEntry 7 }

casfFrLmiNetN393 OBJECT-TYPE
    SYNTAX INTEGER(0..10)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The value of the network-side monitored events count
        for this frame relay port. If, within N393 number of
        events, the network-side receives N392 number of
        errors, the interface is marked as down."
    REFERENCE
        "Draft American National  Standard  T1.617-1991,
        Section D.7 Timer N393."
    DEFVAL { 3 }
    ::= { casfFrLmiEntry 8 }

casfFrLmiNetT392 OBJECT-TYPE
    SYNTAX INTEGER(5..30)
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The value of the network-side  polling verification
        timer for this frame relay port."
    REFERENCE
        "Draft American National  Standard  T1.617-1991,
        Section D.7 Timer T392."
    DEFVAL { 15 }
    ::= { casfFrLmiEntry 9 }

casfFrLmiEnquiryIns OBJECT-TYPE
    SYNTAX Counter
--  Units
--    messages
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of Status Enquiry messages received."
    ::= { casfFrLmiEntry 10 }

casfFrLmiEnquiryOuts OBJECT-TYPE
    SYNTAX Counter
--  Units
--    messages
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of Status Enquiry messages sent."
    ::= { casfFrLmiEntry 11 }

casfFrLmiStatusIns OBJECT-TYPE
    SYNTAX Counter
--  Units
--    messages
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of Status messages received."
    ::= { casfFrLmiEntry 12 }

casfFrLmiStatusOuts OBJECT-TYPE
    SYNTAX Counter
--  Units
--    messages
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of Status messages sent."
    ::= { casfFrLmiEntry 13 }

casfFrLmiStatusTimeouts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of times when timeout occurred on waiting
        for Status message"
    ::= { casfFrLmiEntry 14 }

casfFrLmiStatusEnqTimeouts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of times when timeout occurred on waiting
        for Status Enquiry message"
    ::= { casfFrLmiEntry 15 }

casfConfIfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CasfConfIfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Contains an entry for each Frame Relay interface that
         supports FR-ATM interworking connections. An entry
         contains interworking related parameters for the interface."
    ::= { casfFrInterface 2 }

casfConfIfEntry OBJECT-TYPE
    SYNTAX CasfConfIfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Configuration parameters for interworking at a 
        Frame Relay interface."
    INDEX { ifIndex }
    ::= { casfConfIfTable 1 }

CasfConfIfEntry ::= SEQUENCE {
    casfConfIfAtmAddress AtmAddr,
    casfConfIfUpcIntent INTEGER,
    casfConfIfBcDefault INTEGER,
    casfConfIfCledSpvcDeModeDef INTEGER,
    casfConfIfCledSpvcClpModeDef INTEGER
    }

casfConfIfAtmAddress OBJECT-TYPE
    SYNTAX AtmAddr
--    Rsyntax OCTET STRING(SIZE(0..40))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The ATM Address that identifies this interface. This
        address can be used to setup soft VC's to this
        interface over an ATM network."
    ::= { casfConfIfEntry 1 }

casfConfIfUpcIntent OBJECT-TYPE
    SYNTAX INTEGER {
        pass(1),
        tagDrop(2),
        tag(3),
        drop(4)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the default Usage Parameter Control (UPC)
        action to use at this interface for connections that
        do not explicitly specify a UPC action."
    ::= { casfConfIfEntry 2 }

casfConfIfBcDefault OBJECT-TYPE
    SYNTAX INTEGER(0..32768)
--  Units
--    bits
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the default Committed Burst Size (Bc) value
        to use at this interface for connections that do not
        explicitly specify the value of Bc."
    ::= { casfConfIfEntry 3 }

casfConfIfCledSpvcDeModeDef OBJECT-TYPE
    SYNTAX INTEGER {
        deIfClpOrFrsscsDe(1),
        deIfFrsscsDe(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the default mapping from Congestion Loss 
        Priority (CLP) bit on the ATM side to Discard 
        Eligibility (DE) bit on the Frame Relay side. This 
        is used when receiving a soft PVC Setup using the 
        standard encoding of the called Soft PVC IE. 
        Otherwise a proprietary encoding provides this 
        information."
    REFERENCE
        " ATM Forum specification AF-CS-0127.000 for
        standard encoding of Soft PVC IE."
    DEFVAL { deIfClpOrFrsscsDe }
    ::= { casfConfIfEntry 4 }

casfConfIfCledSpvcClpModeDef OBJECT-TYPE
    SYNTAX INTEGER {
        clpIfDe(1),
        clpIfIsZero(2),
        clpIfIsOne(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the default mapping from Discard Eligibility 
        (DE) bit on the Frame Relay side to Congestion Loss 
        Priority (CLP) bit on the ATM side.This is used when 
        receiving a soft PVC Setup using the standard encoding 
        of the called Soft PVC IE. Otherwise a proprietary 
        encoding provides this information."
    REFERENCE
        " ATM Forum specification AF-CS-0127.000 for
        standard encoding of Soft PVC IE."
    DEFVAL { clpIfDe }
    ::= { casfConfIfEntry 5 }

casfVcCountTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CasfVcCountEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A table containing counters at Frame Relay connection
        end-points. Entries in this table are created and
        deleted whenever corresponding entries in the
        casfVcEndptTable are created and deleted."
    ::= { casfFrCounts 1 }

casfVcCountEntry OBJECT-TYPE
    SYNTAX CasfVcCountEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Counters at a Frame Relay connection end-point, which
                is identified by the ifIndex of the Frame Relay
                interface and the DLCI number."
    INDEX { ifIndex, casfVcEndptDlci }
    ::= { casfVcCountTable 1 }

CasfVcCountEntry ::= SEQUENCE {
    casfVcCountReceivedFrames Counter,
    casfVcCountReceivedOctets Counter,
    casfVcCountReceivedFECNs Counter,
    casfVcCountReceivedBECNs Counter,
    casfVcCountReceivedDEs Counter,
    casfVcCountInDiscards Counter,
    casfVcCountOutDiscards Counter,
    casfVcCountSentFrames Counter,
    casfVcCountSentOctets Counter,
    casfVcCountSentFECNs Counter,
    casfVcCountSentBECNs Counter,
    casfVcCountSentDEs Counter,
    casfVcCountTaggedFECNs Counter,
    casfVcCountTaggedBECNs Counter,
    casfVcCountTaggedDEs Counter
    }

casfVcCountReceivedFrames OBJECT-TYPE
    SYNTAX Counter
--  Units
--    frames
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of frames received."
    ::= { casfVcCountEntry 1 }

casfVcCountReceivedOctets OBJECT-TYPE
    SYNTAX Counter
--  Units
--    octets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of octets received. This counter counts octets from
             the beginning of the frame relay header field to the
             end of user data."
    ::= { casfVcCountEntry 2 }

casfVcCountReceivedFECNs OBJECT-TYPE
    SYNTAX Counter
--  Units
--    frames
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of frames received from the network
                       with the FECN (Forward Explicit Congestion
        Notification) bit set."
    ::= { casfVcCountEntry 3 }

casfVcCountReceivedBECNs OBJECT-TYPE
    SYNTAX Counter
--  Units
--    frames
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of frames received from the network
                       with the BECN (Backward Explicit Network Congestion)
        bit set."
    ::= { casfVcCountEntry 4 }

casfVcCountReceivedDEs OBJECT-TYPE
    SYNTAX Counter
--  Units
--    frames
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of frames received with the Discard
        Eligibility (DE) bit set."
    ::= { casfVcCountEntry 5 }

casfVcCountInDiscards OBJECT-TYPE
    SYNTAX Counter
--  Units
--    frames
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of frames received that were discarded at
                       ingress. Possible reasons are policing, congestion."
    ::= { casfVcCountEntry 6 }

casfVcCountOutDiscards OBJECT-TYPE
    SYNTAX Counter
--  Units
--    frames
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of frames that were to be transmitted but were
        discarded. Possible reasons are policing, lack of buffers."
    ::= { casfVcCountEntry 7 }

casfVcCountSentFrames OBJECT-TYPE
    SYNTAX Counter
--  Units
--    frames
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of frames sent."
    ::= { casfVcCountEntry 8 }

casfVcCountSentOctets OBJECT-TYPE
    SYNTAX Counter
--  Units
--    octets
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of octets sent. This counter counts octets from
             the beginning of the frame relay header field to the
             end of user data."
    ::= { casfVcCountEntry 9 }

casfVcCountSentFECNs OBJECT-TYPE
    SYNTAX Counter
--  Units
--    frames
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of frames that were sent with the FECN bit set."
    ::= { casfVcCountEntry 10 }

casfVcCountSentBECNs OBJECT-TYPE
    SYNTAX Counter
--  Units
--    frames
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of frames sent with the BECN bit set."
    ::= { casfVcCountEntry 11 }

casfVcCountSentDEs OBJECT-TYPE
    SYNTAX Counter
--  Units
--    frames
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of frames sent with the DE bit set."
    ::= { casfVcCountEntry 12 }

casfVcCountTaggedFECNs OBJECT-TYPE
    SYNTAX Counter
--  Units
--    frames
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of frames for which the switch set the FECN bit."
    ::= { casfVcCountEntry 13 }

casfVcCountTaggedBECNs OBJECT-TYPE
    SYNTAX Counter
--  Units
--    frames
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of frames for which the switch set the BECN bit."
    ::= { casfVcCountEntry 14 }

casfVcCountTaggedDEs OBJECT-TYPE
    SYNTAX Counter
--  Units
--    frames
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of frames for which the switch set the DE bit."
    ::= { casfVcCountEntry 15 }

casfVcIwfCountTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CasfVcIwfCountEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains counters at the Frame Relay
        endpoint of FR-ATM interworking connections. There is
        an entry in this table corresponding to each entry in
        casfVcEndptTable."
    ::= { casfFrCounts 2 }

casfVcIwfCountEntry OBJECT-TYPE
    SYNTAX CasfVcIwfCountEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A set of counters at the Frame Relay endpoint of a
         FR-ATM interworking connection."
    INDEX { ifIndex, casfVcEndptDlci }
    ::= { casfVcIwfCountTable 1 }

CasfVcIwfCountEntry ::= SEQUENCE {
    casfVcIwfCountInUnknownProts Counter,
    casfVcIwfCountOutUnknownProts Counter,
    casfVcIwfCountReassemblyTimeouts Counter,
    casfVcIwfCountLengthErrors Counter,
    casfVcIwfCountCrcErrors Counter,
    casfVcIwfCountTotalDiscardFrames Counter
    }

casfVcIwfCountInUnknownProts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Frames received with unknown protocol.  This event is
        counted only for connections with service
        interworking in translation mode. For other types of
        connections, this count will remain at zero."
    ::= { casfVcIwfCountEntry 1 }

casfVcIwfCountOutUnknownProts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Outbound frames that were not transmitted because
        they contained an unknown protocol.  This event is
        counted only for connections with service
        interworking in translation mode. For other types of
        connections, this count will remain at zero."
    ::= { casfVcIwfCountEntry 2 }

casfVcIwfCountReassemblyTimeouts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of frames which could not be completely
        reassembled due to a reassembly timeout, and were
        thus discarded before being transmitted on this
        connection."
    ::= { casfVcIwfCountEntry 3 }

casfVcIwfCountLengthErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of reassembled frames intended to be
        transmitted on this connection for which the AAL5 PDU
        trailer length fields did not match the actual PDU
        length, and were thus discarded."
    ::= { casfVcIwfCountEntry 4 }

casfVcIwfCountCrcErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of reassembled frames intended to be
        transmitted on this connection for which the AAL5 PDU
        had CRC errors, and were thus discarded."
    ::= { casfVcIwfCountEntry 5 }

casfVcIwfCountTotalDiscardFrames OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of frames intended to be transmitted on
        this connection that were discarded due to any reason
        including those described in other objects in this
        table (e.g., frames that were discarded because
        insufficient buffer space was available for
        reassembling the frame)."
    ::= { casfVcIwfCountEntry 6 }

casfFAMapTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CasfFAMapEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table provides mapping from a DLCI on a Frame
         Relay interface to a VPI/VCI on an internal ATM
         interface."
    ::= { casfMapping 1 }

casfFAMapEntry OBJECT-TYPE
    SYNTAX CasfFAMapEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Given the ifIndex of a frame relay interface, and a DLCI on
        that interface, this entry provides the ifIndex and
         VPI/VCI on the corresponding internal atm interface."
    INDEX { ifIndex, casfFAMapDlci }
    ::= { casfFAMapTable 1 }

CasfFAMapEntry ::= SEQUENCE {
    casfFAMapDlci DlciValue,
    casfFAMapInternalAtmInterface InterfaceIndex,
    casfFAMapInternalAtmVpi INTEGER,
    casfFAMapInternalAtmVci INTEGER
    }

casfFAMapDlci OBJECT-TYPE
    SYNTAX DlciValue
--    Rsyntax INTEGER(0..4194303)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The DLCI value."
    ::= { casfFAMapEntry 1 }

casfFAMapInternalAtmInterface OBJECT-TYPE
    SYNTAX InterfaceIndex
--    Rsyntax INTEGER(1..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The ifIndex of the internal ATM interface to which
        this DLCI is mapped."
    ::= { casfFAMapEntry 2 }

casfFAMapInternalAtmVpi OBJECT-TYPE
    SYNTAX INTEGER(0..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The VPI value to which this DLCI is mapped."
    ::= { casfFAMapEntry 3 }

casfFAMapInternalAtmVci OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The VCI value to which this DLCI is mapped."
    ::= { casfFAMapEntry 4 }

casfAFMapTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CasfAFMapEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table provides mapping from an atmVclEntry on an
        internal ATM internal to a casfVcEndptEntry on a  
        Frame Relay interface."
    ::= { casfMapping 2 }

casfAFMapEntry OBJECT-TYPE
    SYNTAX CasfAFMapEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Given the ifIndex of an internal ATM interface, and
        VPI/VCI, provides the ifIndex of a Frame Relay
        interface and DLCI, if such mapping exists.
        
              The value of ifType for an internal ATM interface is
        propVirtual(53). For every such interface on the
        switch, this table contains an entry for each virtual
        channel link (VCL) that maps to a frame relay
        connection. Entries in this table come and go as the
        corresponding frame relay connections come and go."
    INDEX { ifIndex, casfAFMapAtmVpi, casfAFMapAtmVci }
    ::= { casfAFMapTable 1 }

CasfAFMapEntry ::= SEQUENCE {
    casfAFMapAtmVpi INTEGER,
    casfAFMapAtmVci INTEGER,
    casfAFMapFrIndex InterfaceIndex,
    casfAFMapFrDlci DlciValue
    }

casfAFMapAtmVpi OBJECT-TYPE
    SYNTAX INTEGER(0..255)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The VPI value of the Virtual Channel Link (VCL) on
        the ATM interface."
    ::= { casfAFMapEntry 1 }

casfAFMapAtmVci OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The VCI value of the Virtual Channel Link (VCL) on
        the ATM interface."
    ::= { casfAFMapEntry 2 }

casfAFMapFrIndex OBJECT-TYPE
    SYNTAX InterfaceIndex
--    Rsyntax INTEGER(1..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The ifIndex of the frame relay interface that this
        VCL maps to."
    ::= { casfAFMapEntry 3 }

casfAFMapFrDlci OBJECT-TYPE
    SYNTAX DlciValue
--    Rsyntax INTEGER(0..4194303)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The DLCI on the frame relay interface that this VCL maps to."
    ::= { casfAFMapEntry 4 }

ciscoAtmSFrIwfConfConnGroup OBJECT IDENTIFIER ::= { ciscoAtmSFrIwfMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects which allow configuration of
--    FR-ATM connections on an ATM switch.
--  objects
--    casfTrafficDescrCIR, casfTrafficDescrBc, casfTrafficDescrBe, 
--    casfTrafficDescrPIR, casfTrafficDescrServCategory, 
--    casfTrafficDescrAtmIndex, casfTrafficDescrRowStatus, 
--    casfVcEndptRxTrafficDescrRow, casfVcEndptTxTrafficDescrRow, 
--    casfVcEndptRxNegTrafficDescrRow, 
--    casfVcEndptTxNegTrafficDescrRow, casfVcEndptConnKind, 
--    casfVcEndptIwfType, casfVcEndptClpMode, casfVcEndptDeMode, 
--    casfVcEndptEfciMode, casfVcEndptUpcMode, 
--    casfVcEndptCreationTime, casfVcEndptRcvdSigStatus, 
--    casfVcEndptSpvcRemoteAddr, casfVcEndptSpvcRemoteType, 
--    casfVcEndptSpvcRemoteDlci, casfVcEndptSpvcRemoteVpi, 
--    casfVcEndptSpvcRemoteVci, casfVcEndptRowStatus, 
--    casfVcSignalStandardCalledIe

ciscoAtmSFrIwfLmiGroup OBJECT IDENTIFIER ::= { ciscoAtmSFrIwfMIBGroups 2 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects for configuring and monitoring LMI
--     on an FR interface.
--  objects
--    casfFrLmiProtocol, casfFrLmiType, casfFrLmiUserN391, 
--    casfFrLmiUserN392, casfFrLmiUserN393, casfFrLmiUserT391, 
--    casfFrLmiNetN392, casfFrLmiNetN393, casfFrLmiNetT392, 
--    casfFrLmiEnquiryIns, casfFrLmiEnquiryOuts, casfFrLmiStatusIns, 
--    casfFrLmiStatusOuts, casfFrLmiStatusTimeouts, 
--    casfFrLmiStatusEnqTimeouts

ciscoAtmSFrIwfConfIfGroup OBJECT IDENTIFIER ::= { ciscoAtmSFrIwfMIBGroups 3 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects which allow configuration of
--    interworking related parameters on an FR interface.
--  objects
--    casfConfIfAtmAddress, casfConfIfUpcIntent, 
--    casfConfIfBcDefault, casfConfIfCledSpvcDeModeDef, 
--    casfConfIfCledSpvcClpModeDef

ciscoAtmSFrIwfVcStatsGroup OBJECT IDENTIFIER ::= { ciscoAtmSFrIwfMIBGroups 4 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of counters at FR VC end-points.
--  objects
--    casfVcCountReceivedFrames, casfVcCountReceivedOctets, 
--    casfVcCountReceivedFECNs, casfVcCountReceivedBECNs, 
--    casfVcCountReceivedDEs, casfVcCountInDiscards, 
--    casfVcCountOutDiscards, casfVcCountSentFrames, 
--    casfVcCountSentOctets, casfVcCountSentFECNs, 
--    casfVcCountSentBECNs, casfVcCountSentDEs, 
--    casfVcCountTaggedFECNs, casfVcCountTaggedBECNs, 
--    casfVcCountTaggedDEs

ciscoAtmSFrIwfVcIwStatsGroup OBJECT IDENTIFIER ::= { ciscoAtmSFrIwfMIBGroups 5 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of counters related to FR-ATM interworking
--     at FR VC end-points.
--  objects
--    casfVcIwfCountInUnknownProts, casfVcIwfCountOutUnknownProts, 
--    casfVcIwfCountReassemblyTimeouts, casfVcIwfCountLengthErrors, 
--    casfVcIwfCountCrcErrors, casfVcIwfCountTotalDiscardFrames

ciscoAtmSFrIwfMappingGroup OBJECT IDENTIFIER ::= { ciscoAtmSFrIwfMIBGroups 6 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects that describe the mapping from a
--     FR connection end-point to an ATM VCL, and vice versa.
--  objects
--    casfFAMapInternalAtmInterface, casfFAMapInternalAtmVpi, 
--    casfFAMapInternalAtmVci, casfAFMapFrIndex, casfAFMapFrDlci

ciscoAtmSFrIwfMIBCompliance OBJECT IDENTIFIER ::= { ciscoAtmSFrIwfMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for entities which implement
--    the Cisco Atm Switch FR IWF MIB.
--  Module
--    >>current<<
--   MandGroup
--    ciscoAtmSFrIwfConfConnGroup
--   MandGroup
--    ciscoAtmSFrIwfLmiGroup
--   MandGroup
--    ciscoAtmSFrIwfConfIfGroup
--   MandGroup
--    ciscoAtmSFrIwfVcStatsGroup
--   MandGroup
--    ciscoAtmSFrIwfVcIwStatsGroup
--   MandGroup
--    ciscoAtmSFrIwfMappingGroup


END