-- MIB file created 25-Mar-2003 15:57:34, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com CISCO-ATM-TRAFFIC-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-ATM-TRAFFIC-MIB.my" -- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T" IMPORTS atmTrafficDescrParamIndex FROM ATM-MIB ciscoExperiment FROM CISCO-SMI SnmpAdminString FROM SNMP-FRAMEWORK-MIB OBJECT-TYPE FROM RFC-1212; ciscoAtmTrafficExtMIB OBJECT IDENTIFIER ::= { ciscoExperiment 11 } -- MODULE-IDENTITY -- LastUpdated -- 200208260000Z -- OrgName -- Cisco System Inc. -- ContactInfo -- Cisco Systems -- Customer Service -- -- Postal: 170 W. Tasman Drive -- San Jose, CA 95134 -- USA -- -- Tel: +1 800 553-NETS -- -- E-mail: cs-atm@cisco.com -- Descr -- This MIB module is an extension to traffic OIDs -- and variables defined in rfc1695. -- RevDate -- 200208260000Z -- RevDescr -- Deprecated atmNoClpNoScrCdvt as a similar object -- atmNoClpNoScrCdvt defined in RFC-2514 can be used instead. -- RevDate -- 200111010000Z -- RevDescr -- Added an object to identify the traffic descriptor by a -- name in human readable form. -- RevDate -- 9705290000Z -- RevDescr -- Added traffic for types dual-leaky bucket and mcr support -- made possible on the LS1010 by the Feature Card Per Flow -- Queueing support for per-VC queueing hardware structures. ciscoAtmTrafficExtMIBObjects OBJECT IDENTIFIER ::= { ciscoAtmTrafficExtMIB 1 } ciscoAtmTrafficTypeExt OBJECT IDENTIFIER ::= { ciscoAtmTrafficExtMIBObjects 1 } ciscoAtmTrafficTableExt OBJECT IDENTIFIER ::= { ciscoAtmTrafficExtMIBObjects 2 } ciscoAtmTrafficExtMIBConformance OBJECT IDENTIFIER ::= { ciscoAtmTrafficExtMIB 3 } ciscoAtmTrafficExtMIBCompliances OBJECT IDENTIFIER ::= { ciscoAtmTrafficExtMIBConformance 1 } ciscoAtmTrafficExtMIBGroups OBJECT IDENTIFIER ::= { ciscoAtmTrafficExtMIBConformance 2 } atmNoClpNoScrCdvt OBJECT IDENTIFIER ::= { ciscoAtmTrafficTypeExt 1 } -- OBJECT-IDENTITY -- Status -- deprecated -- Descr -- Specifies peak cell rate for CLP, and -- cell delay variation tolerance: -- Parameter 1: CLP=0+1 peak cell rate in -- cells per second -- Parameter 2: CDVT in cell-times -- Parameter 3: not used -- Parameter 4: not used -- Parameter 5: not used. -- This traffic descriptor is for cbr, abr -- or ubr service categories, desiring to -- specify the cdvt as well as pcr. atmClpScrMbsCdvt OBJECT IDENTIFIER ::= { ciscoAtmTrafficTypeExt 2 } -- OBJECT-IDENTITY -- Status -- mandatory -- Descr -- This traffic descriptor is for Peak -- Cell Rate (PCR), Sustained Cell Rate (SCR), -- Maximum Burst Size applied to SCR, -- and Cell Delay Variation Tolerance -- applied to PCR. -- The use of the parameter vector for this type: -- Parameter 1: CLP=0+1 peak cell rate in -- cells per second -- Parameter 2: CLP=0 sustained cell rate in -- cells per second. -- Parameter 3: maximum burst size in cells -- Parameter 4: CDVT in cell-times -- Parameter 5: not used. atmNoClpScrMbsCdvt OBJECT IDENTIFIER ::= { ciscoAtmTrafficTypeExt 3 } -- OBJECT-IDENTITY -- Status -- mandatory -- Descr -- This traffic descriptor is for Peak -- Cell Rate (PCR), Sustained Cell Rate (SCR), -- Maximum Burst Size applied to SCR, -- and Cell Delay Variation Tolerance -- applied to PCR. -- The use of the parameter vector for this type: -- Parameter 1: CLP=0+1 peak cell rate in -- cells per second -- Parameter 2: CLP=0+1 sustained cell rate in -- cells per second. -- Parameter 3: maximum burst size in cells -- Parameter 4: CDVT in cell-times -- Parameter 5: not used. atmNoClpMcr OBJECT IDENTIFIER ::= { ciscoAtmTrafficTypeExt 4 } -- OBJECT-IDENTITY -- Status -- mandatory -- Descr -- This traffic descriptor is for Peak -- Cell Rate (PCR) and Minimum Cell Rate -- (MCR). -- The use of the parameter vector for this type: -- Parameter 1: CLP=0+1 peak cell rate in -- cells per second -- Parameter 2: CLP=0+1 minimum cell rate in -- cells per second. -- Parameter 3: not used. -- Parameter 4: not used. -- Parameter 5: not used. atmNoClpMcrCdvt OBJECT IDENTIFIER ::= { ciscoAtmTrafficTypeExt 5 } -- OBJECT-IDENTITY -- Status -- mandatory -- Descr -- This traffic descriptor is for Peak -- Cell Rate (PCR), Minimum Cell Rate (MCR), -- and Cell Delay Variation Tolerance -- applied to PCR. -- The use of the parameter vector for this type: -- Parameter 1: CLP=0+1 peak cell rate in -- cells per second -- Parameter 2: CDVT in cell-times -- Parameter 3: CLP=0+1 minimum cell rate in -- cells per second. -- Parameter 4: not used. -- Parameter 5: not used. atmTrafficDescrParamExtTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmTrafficDescrParamExtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Provide additional information specifying traffic parameters for a VC/VP." ::= { ciscoAtmTrafficTableExt 1 } atmTrafficDescrParamExtEntry OBJECT-TYPE SYNTAX AtmTrafficDescrParamExtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " An entry in the Traffic Parameter Descriptor extension table." INDEX { atmTrafficDescrParamIndex } -- Augments atmTrafficDescrParamEntry FROM ATM-MIB ::= { atmTrafficDescrParamExtTable 1 } AtmTrafficDescrParamExtEntry ::= SEQUENCE { atmTrafficExplicitServCategory INTEGER, atmTrafficDerivedServCategory INTEGER, atmTrafficDescriptorName SnmpAdminString } atmTrafficExplicitServCategory OBJECT-TYPE SYNTAX INTEGER { cbr(1), vbrRt(2), vbrNrt(3), abr(4), ubr(5), notDef(6) } ACCESS read-write STATUS mandatory DESCRIPTION "This objects indicates the Service Category specified by the Traffic Descriptor. If it is defined, the setting of this object determines the Service Category used for the connection. This then limits the possible Traffic Descriptor Types as follows: Explicit Service Category Type may only be ----------------------------------------- cbr atmNoClpNoScr. atmClpNoTaggingNoScr atmClpTaggingNoScr atmNoClpNoScrCdvt abr/ubr atmNoTrafficDescriptor atmNoClpNoScr. atmNoClpNoScrCdvt atmNoClpMcr -- ubr+/abr atmNoClpMcrCdvt -- ubr+/abr vbr atmNoClpScr atmClpNoTaggingScr atmClpTaggingScr atmClpScrMbsCdvt atmNoClpScrMbsCdvt ----------------------------------------- If the settings of Service Category and Traffic Descriptor Type are not compatible, the row can not be made active." DEFVAL { notDef } ::= { atmTrafficDescrParamExtEntry 1 } atmTrafficDerivedServCategory OBJECT-TYPE SYNTAX INTEGER { cbr(1), vbrRt(2), vbrNrt(3), abr(4), ubr(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the Service Category derived from the Traffic Descriptor. If the object atmTrafficExplicitServCategory has a defined value, then this object mirrors that value. If Explicit Service Category has the value notDef, then this object reflects the Service Category derived from the Traffic Descriptor Type as follows: Traffic Descriptor Service Type Category ----------------------------------------- atmNoTrafficDescriptor ubr atmNoClpMcr abr atmNoClpMcrCdvt abr atmNoClpNoScr --| atmClpNoTaggingNoScr |-- cbr atmClpTaggingNoScr | atmNoClpNoScrCdvt --| atmNoClpScr --| atmClpNoTaggingScr |-- vbr-rt atmClpScrMbsCdvt | atmNoClpScrMbsCdvt | atmClpTaggingScr --| -----------------------------------------" ::= { atmTrafficDescrParamExtEntry 2 } atmTrafficDescriptorName OBJECT-TYPE SYNTAX SnmpAdminString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "A human readable string that contains the unique name of this Traffic Descriptor. This object will return a zero-length string if value is not set." DEFVAL { "" } ::= { atmTrafficDescrParamExtEntry 3 } ciscoAtmTrafficTableExtMIBGroup OBJECT IDENTIFIER ::= { ciscoAtmTrafficExtMIBGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects which provide extensions to the -- ATM Traffic Parameter Descriptor Table. -- objects -- atmTrafficExplicitServCategory, atmTrafficDerivedServCategory ciscoAtmTrafficNmsGroup OBJECT IDENTIFIER ::= { ciscoAtmTrafficExtMIBGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects which provide additional -- information for a management system. -- objects -- atmTrafficDescriptorName ciscoAtmTrafficExtMIBCompliance OBJECT IDENTIFIER ::= { ciscoAtmTrafficExtMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The compliance statement for the Cisco ATM Traffic Extension MIB. -- Module -- >>current<< -- MandGroup -- ciscoAtmTrafficTableExtMIBGroup ciscoAtmTrafficExtMIBComplianceRev1 OBJECT IDENTIFIER ::= { ciscoAtmTrafficExtMIBCompliances 2 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for the Cisco ATM Traffic Extension MIB. -- Module -- >>current<< -- MandGroup -- ciscoAtmTrafficTableExtMIBGroup -- OptGroup -- ciscoAtmTrafficNmsGroup END