-- MIB file created 29-Jul-2002 15:03:55, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-BGP-POLICY-ACCOUNTING-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-BGP-POLICY-ACCOUNTING-MIB.my"
-- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T"

IMPORTS
    ciscoMgmt
            FROM CISCO-SMI
    Counter, Gauge
            FROM RFC1155-SMI
    ifIndex
            FROM IF-MIB
    OBJECT-TYPE
            FROM RFC-1212;

ciscoBgpPolAcctMIB OBJECT IDENTIFIER ::= { ciscoMgmt 148 }
-- MODULE-IDENTITY
--  LastUpdated
--    200207260000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--           Cisco Systems
--            Customer Service
--    
--    Postal: 170 W. Tasman Drive
--            San Jose, CA  95134
--            USA
--    
--       Tel: +1 800 553-NETS
--    
--    E-mail: cs-snmp@cisco.com
--  Descr
--    BGP policy based accounting information
--  RevDate
--    200207260000Z
--  RevDescr
--    Added egress, packet and octet, counters for the BGP
--    policy accounting feature.
--  RevDate
--    9912170000Z
--  RevDescr
--    Initial version of this MIB module.

ciscoBgpPolAcctMIBObjects OBJECT IDENTIFIER ::= { ciscoBgpPolAcctMIB 1 }
ciscoBgpPolAcctMIBConformance OBJECT IDENTIFIER ::= { ciscoBgpPolAcctMIB 3 }
ciscoBgpPolAcctMIBCompliances OBJECT IDENTIFIER ::= { ciscoBgpPolAcctMIBConformance 1 }
ciscoBgpPolAcctMIBGroups OBJECT IDENTIFIER ::= { ciscoBgpPolAcctMIBConformance 2 }

cbpAcctTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CbpAcctEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The cbpAcctTable provides statistics about ingress and egress 
         traffic on an interface. This data could be used for purposes 
         like billing."
    ::= { ciscoBgpPolAcctMIBObjects 1 }

cbpAcctEntry OBJECT-TYPE
    SYNTAX CbpAcctEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each cbpAcctEntry provides statistics for traffic of interest
        on an ingress and/or egress interfaces. The traffic of interest 
        may be used for purposes like billing, and is referred to from 
        here on in the MIB by the term 'traffic-type', which corresponds
        to cbpAcctTrafficIndex. Traffic-types are configured by the user
        on a per interface basis.
        
        The statistics include ingress packet counts, ingress octet
        counts, egress packet counts and egress octet counts. Entries 
        are created when traffic-type is configured on an interface.
        Entries are deleted automatically when the user 
        removes the corresponding traffic-type configuration from an
        interface."
    INDEX { ifIndex, cbpAcctTrafficIndex }
    ::= { cbpAcctTable 1 }

CbpAcctEntry ::= SEQUENCE {
    cbpAcctTrafficIndex INTEGER,
    cbpAcctInPacketCount Counter,
    cbpAcctInOctetCount Counter,
    cbpAcctOutPacketCount Counter,
    cbpAcctOutOctetCount Counter
    }

cbpAcctTrafficIndex OBJECT-TYPE
    SYNTAX INTEGER(1..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An integer value greater than 0, that uniquely identifies
        a traffic-type. The traffic-type has no intrinsic meaning.
        It just means the traffic coming into an interface can be
        differentiated into different types. It is up to the user to
        give meaning to and configure the various traffic-types on an 
        interface."
    ::= { cbpAcctEntry 1 }

cbpAcctInPacketCount OBJECT-TYPE
    SYNTAX --?? syntax is not convertable to SMIv1
           Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of packets received for a particular
        traffic-type on an interface."
    ::= { cbpAcctEntry 2 }

cbpAcctInOctetCount OBJECT-TYPE
    SYNTAX --?? syntax is not convertable to SMIv1
           Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of octets received for a particular
        traffic-type on an interface."
    ::= { cbpAcctEntry 3 }

cbpAcctOutPacketCount OBJECT-TYPE
    SYNTAX --?? syntax is not convertable to SMIv1
           Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of packets transmitted for a particular
        traffic-type on an interface."
    ::= { cbpAcctEntry 4 }

cbpAcctOutOctetCount OBJECT-TYPE
    SYNTAX --?? syntax is not convertable to SMIv1
           Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of octets transmitted for a particular
        traffic-type on an interface."
    ::= { cbpAcctEntry 5 }

cbpAcctTableGroup OBJECT IDENTIFIER ::= { ciscoBgpPolAcctMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    deprecated
--  Descr
--    A collection of objects providing customer traffic 
--    related parameters.
--  objects
--    cbpAcctTrafficIndex, cbpAcctInPacketCount, 
--    cbpAcctInOctetCount

cbpAcctTableGroupRev1 OBJECT IDENTIFIER ::= { ciscoBgpPolAcctMIBGroups 2 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects providing customer traffic 
--    related parameters.
--  objects
--    cbpAcctTrafficIndex, cbpAcctInPacketCount, 
--    cbpAcctInOctetCount, cbpAcctOutPacketCount, 
--    cbpAcctOutOctetCount

ciscoBgpPolAcctMIBCompliance OBJECT IDENTIFIER ::= { ciscoBgpPolAcctMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    deprecated
--  Descr
--    The compliance statement for entities which implement
--    this Cisco BGP-Policy Traffic Accounting MIB.
--  Module
--    >>current<<
--   MandGroup
--    cbpAcctTableGroup

ciscoBgpPolAcctMIBComplianceRev1 OBJECT IDENTIFIER ::= { ciscoBgpPolAcctMIBCompliances 2 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for entities which implement
--    this Cisco BGP-Policy Traffic Accounting MIB.
--  Module
--    >>current<<
--   MandGroup
--    cbpAcctTableGroupRev1


END