-- MIB file created 20-Feb-2006 12:13:10, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com CISCO-CALL-TRACKER-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-CALL-TRACKER-MIB.my" -- Compile options "4 7 F H N O W 03 06 0B 0G 0N 0T" IMPORTS DisplayString, TimeStamp, TruthValue FROM SNMPv2-TC-v1 ciscoMgmt FROM CISCO-SMI AbsoluteCounter32 FROM DIAL-CONTROL-MIB Gauge, IpAddress FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; ciscoCallTrackerMIB OBJECT IDENTIFIER ::= { ciscoMgmt 163 } -- MODULE-IDENTITY -- LastUpdated -- 200504120000Z -- OrgName -- Cisco Systems, Inc. -- ContactInfo -- Cisco Systems -- Customer Service -- -- Postal: 170 W. Tasman Drive -- San Jose, CA 95134 -- USA -- -- Tel: +1 800 553-NETS -- -- E-mail: cs-dial@cisco.com -- Descr -- This MIB module provides information for tracking the -- progress and status of a data call from the hardware -- layer through the application or service layer. -- -- A data call is a call setup via a signaling -- protocol (e.g., ISDN D Channel signaling) on the -- Public Switching Telephony Network to a -- Network Access Server in order to transfer data, -- either as a byte stream (e.g., terminal emulation) -- or in a packet format (e.g., PPP packets) from a -- data terminal (e.g., Personal Computer) to a -- data network (e.g., Internet). -- RevDate -- 200504120000Z -- RevDescr -- [1] CctCallCategory - added syncData -- [2] CctCallCategory - added lapb-ta -- [3] Added new textual convention CctCallSigType -- [4] Added cctActiveCallSignalingType to cctActiveTable -- [5] Added cctHistoryCallSignalingType to -- cctHistoryTable -- RevDate -- 200402020000Z -- RevDescr -- Included mgcpData in CctCallCategory. -- RevDate -- 200002100000Z -- RevDescr -- Initial version of this MIB. cctMIBObjects OBJECT IDENTIFIER ::= { ciscoCallTrackerMIB 1 } cctGeneral OBJECT IDENTIFIER ::= { cctMIBObjects 1 } cctActive OBJECT IDENTIFIER ::= { cctMIBObjects 2 } cctHistory OBJECT IDENTIFIER ::= { cctMIBObjects 3 } cctNotificationConfig OBJECT IDENTIFIER ::= { cctMIBObjects 4 } cctMIBNotificationPrefix OBJECT IDENTIFIER ::= { ciscoCallTrackerMIB 2 } cctMIBNotifications OBJECT IDENTIFIER ::= { cctMIBNotificationPrefix 0 } cctMIBConformance OBJECT IDENTIFIER ::= { ciscoCallTrackerMIB 3 } cctMIBCompliances OBJECT IDENTIFIER ::= { cctMIBConformance 1 } cctMIBGroups OBJECT IDENTIFIER ::= { cctMIBConformance 2 } CctCallId ::= Gauge(1..4294967295) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- Represents a Call Identifier. -- The call identifier is a monotonically assigned, positive -- integer which uniquely identifies the call within the -- system. CctServiceType ::= INTEGER { none(1), other(2), slip(3), ppp(4), mp(5), tcpClear(6), telnet(7), exec(8), l2f(9), l2tp(10) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- Represents possible service types. -- none - No service associated with call. -- other - Service active, but none of the following. -- slip - Serial Line IP -- ppp - PPP -- mp - Multilink PPP (RFC 1990) -- tcpClear - Byte stream over TCP -- telnet - TELNET -- exec - terminal server -- l2f - Virtual Private Data Network service (VPDN) -- using Layer 2 Forwarding protocol -- l2tp - Virtual Private Data Network service (VPDN) -- using Layer 2 Tunneling Protocol CctCallCategory ::= INTEGER { none(1), other(2), modem(3), isdnSync(4), v110(5), v120(6), casDigital(7), mgcpData(8), syncData(9), lapb-ta(10) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- Represents possible call categories or types. -- none - No call category associated with call -- other - None of the following -- modem - Modem call -- isdn-sync - ISDN sync digital call -- Now mapped to syncData -- v110 - V110 Call -- v120 - V120 Call -- cas-digital - Channel Associated Signaling -- (CAS) 56k data call -- mgcpData - MGCP data call -- Now mapped to syncData -- syncData - Sync digital data call for any -- call control -- lapb-ta - LAPB or LAPB-TA call CctCallSigType ::= INTEGER { unknown(1), external(2), q931(3), autoDetect(4) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- Represents supported signaling types for a call. -- -- Unknown - Signaling origin of call type unknown. -- External - Signaling origin of call type by external -- agent e.g. MGCP, H.248 -- Q931 - Signaling origin of call type by Q.931/ISDN -- Autodetect - Signaling of call type by automatic detection cctCallIdPrefix OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This object may be used in conjunction with objects of type CctCallId to provide call references which are unique across system re-initializations. This value is generated at system re-initialization. It is a 32-bit random number, with very low likely-hood of repeating within the lifetime of the system." ::= { cctGeneral 1 } cctActiveTableNumberEntries OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of entries currently in the cctActiveTable." ::= { cctActive 1 } cctActiveTableHighWaterMark OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of entries present in cctActiveTable since last system re-initialization. This corresponds to the maximum value reported by cctActiveTableNumberEntries." ::= { cctActive 2 } cctActiveTable OBJECT-TYPE SYNTAX SEQUENCE OF CctActiveEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains entries for active calls in the system. All such calls either originate or terminate at this system. The table is indexed by call ID assigned to the call." ::= { cctActive 3 } cctActiveEntry OBJECT-TYPE SYNTAX CctActiveEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The information regarding a single call. Entries are created when a setup request is first received by the system. Entries are removed when a call is terminated or rejected. A corresponding entry is created in the cctHistoryTable." INDEX { cctActiveCallId } ::= { cctActiveTable 1 } CctActiveEntry ::= SEQUENCE { cctActiveCallId CctCallId, cctActiveSetupTime TimeStamp, cctActiveOrigin INTEGER, cctActiveConnectionTime TimeStamp, cctActivePhysicalLayerReadyTime TimeStamp, cctActiveServiceUpTime TimeStamp, cctActiveServiceType CctServiceType, cctActiveUserValidationTime TimeStamp, cctActiveUserId DisplayString, cctActiveUserIpAddr IpAddress, cctActiveUserSubnetMask IpAddress, cctActiveAccountingSessionId DisplayString, cctActiveCallCategory CctCallCategory, cctActiveInitialRxRate Gauge, cctActiveInitialTxRate Gauge, cctActiveResourceSlot INTEGER, cctActiveResourcePort INTEGER, cctActiveEntrySlot INTEGER, cctActiveEntryPort INTEGER, cctActiveEntryDs1 INTEGER, cctActiveEntryChannel INTEGER, cctActiveCalledPartyId DisplayString, cctActiveCallingPartyId DisplayString, cctActiveMpBundleId Gauge, cctActiveChargedUnits AbsoluteCounter32, cctActiveReceiveBytes AbsoluteCounter32, cctActiveTransmitBytes AbsoluteCounter32, cctActiveCallSignalingType CctCallSigType } cctActiveCallId OBJECT-TYPE SYNTAX CctCallId -- Rsyntax Gauge(1..4294967295) ACCESS not-accessible STATUS mandatory DESCRIPTION "Represents a Call Identifier. The call identifier is a monotonically increasing unsigned integer which uniquely identifies the call within the system. The Call ID is represented as an unsigned 32-bit integer. After 4,294,967,295 calls, the ID will wrap and the 4,294,967,296th call will receive the next smallest available id starting from 1. Zero is not a valid value." ::= { cctActiveEntry 1 } cctActiveSetupTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Value of sysUpTime when the call is first made known to the system." ::= { cctActiveEntry 2 } cctActiveOrigin OBJECT-TYPE SYNTAX INTEGER { originate(1), answer(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates how the call was created. originate(1) - The call was initiated locally with the system sending the setup request. Dialout answer(2) - The call was initiated remotely and the system received the setup request. Dialin" ::= { cctActiveEntry 3 } cctActiveConnectionTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Value of sysUpTime when the system connected the call." ::= { cctActiveEntry 4 } cctActivePhysicalLayerReadyTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Value of sysUpTime when the physical layer for the call achieved a steady state and the call is ready for higher protocol layers to begin. In the case of modem calls, the physical layer for the call achieves a steady state when the data rates, modulations, and error correcting protocols have been negotiated between the originating and answering modems. This is primarily intended for calls which connect to a processing resource identified by cctActiveResourceSlot and cctActiveResourcePort. It also applies to digital calls using adaptive rate technologies such as V.110 and V.120." ::= { cctActiveEntry 5 } cctActiveServiceUpTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Value of sysUpTime when the call service type identified in cctActiveServiceType was established." ::= { cctActiveEntry 6 } cctActiveServiceType OBJECT-TYPE SYNTAX CctServiceType -- Rsyntax INTEGER { -- none(1), -- other(2), -- slip(3), -- ppp(4), -- mp(5), -- tcpClear(6), -- telnet(7), -- exec(8), -- l2f(9), -- l2tp(10) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Service associated with the call. This is the highest level of service known to the system for the call. The service represents the encapsulation protocol layer active for the call. In the case of multiple services on a given call, the last service activated will be reported." ::= { cctActiveEntry 7 } cctActiveUserValidationTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Value of sysUpTime when the user identification associated with this call was validated. See cctActiveUserId for description of user identification." ::= { cctActiveEntry 8 } cctActiveUserId OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The User login ID or zero length string if unavailable." ::= { cctActiveEntry 9 } cctActiveUserIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address assigned to the cctActiveUserId for this call or 0.0.0.0 if not applicable or unavailable." ::= { cctActiveEntry 10 } cctActiveUserSubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP subnet mask assigned to the cctActiveUserId for this call or 0.0.0.0 if not applicable or unavailable." ::= { cctActiveEntry 11 } cctActiveAccountingSessionId OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Accounting session identification assigned to this call by AAA. The session ID is sent by AAA to RADIUS as the Acct-Session-Id attribute or TACACS+ as the task_id. If no accounting session ID is assigned, the value is a null string." REFERENCE "RFC 2139 RADIUS Accounting The TACACS+ Protocol Version 1.78, Internet Draft" ::= { cctActiveEntry 12 } cctActiveCallCategory OBJECT-TYPE SYNTAX CctCallCategory -- Rsyntax INTEGER { -- none(1), -- other(2), -- modem(3), -- isdnSync(4), -- v110(5), -- v120(6), -- casDigital(7), -- mgcpData(8), -- syncData(9), -- lapb-ta(10) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The call category or type" ::= { cctActiveEntry 13 } cctActiveInitialRxRate OBJECT-TYPE SYNTAX Gauge -- Units -- bits per second ACCESS read-only STATUS mandatory DESCRIPTION "Initial receive data rate for this call. If call is a synchronous digital call such as ISDN sync, this value is the data rate of the B-channel. If call is asynchronous, even if using a synchronous transmission medium such as ISDN, the value is determined by the resource providing the asynchronous processing. For modem calls, this value corresponds to the value of cmRXRate from CISCO-MODEM-MGMT-MIB, immediately after the modem has completed initial negotiations. This value does not change, even if the data rate varies during the call. This value will be zero until an initial data rate has been determined." ::= { cctActiveEntry 14 } cctActiveInitialTxRate OBJECT-TYPE SYNTAX Gauge -- Units -- bits per second ACCESS read-only STATUS mandatory DESCRIPTION "Initial transmit data rate for this call. If call is a synchronous digital call such as ISDN sync, this value is the data rate of the B-channel. If call is asynchronous, even if using a synchronous transmission medium such as ISDN, the value is determined by the resource providing the asynchronous processing. For modem calls, this value corresponds to the value of cmTXRate from CISCO-MODEM-MGMT-MIB, immediately after the modem has completed initial negotiations. This value does not change, even if the data rate varies during the call. This value will be zero until an initial data rate has been determined." ::= { cctActiveEntry 15 } cctActiveResourceSlot OBJECT-TYPE SYNTAX INTEGER(-1..214783647) ACCESS read-only STATUS mandatory DESCRIPTION "Identification of the processing resource allocated to the call. In the case of a call requiring a modem resource, this is the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB. This value along with cctActiveResourcePort uniquely identifies a resource port. Value is -1 if call does not utilize such a resource." ::= { cctActiveEntry 16 } cctActiveResourcePort OBJECT-TYPE SYNTAX INTEGER(-1..214783647) ACCESS read-only STATUS mandatory DESCRIPTION "Identification of the processing resource allocated to the call. In the case of a call requiring a modem resource, this is the value of cmPortIndex from CISCO-MODEM-MGMT-MIB. This value along with cctActiveResourceSlot uniquely identifies a resource port. Value is -1 if call does not utilize such a resource." ::= { cctActiveEntry 17 } cctActiveEntrySlot OBJECT-TYPE SYNTAX INTEGER(0..214783647) ACCESS read-only STATUS mandatory DESCRIPTION "The device slot containing the port on which the call exists." ::= { cctActiveEntry 18 } cctActiveEntryPort OBJECT-TYPE SYNTAX INTEGER(0..214783647) ACCESS read-only STATUS mandatory DESCRIPTION "The physical port within the device slot on which the call exists." ::= { cctActiveEntry 19 } cctActiveEntryDs1 OBJECT-TYPE SYNTAX INTEGER(0..214783647) ACCESS read-only STATUS mandatory DESCRIPTION "The DS1 link containing the call. This may be a DS1 contained within a larger grouping of multiple DS1s within a single physical port. If the physical port is of type DS1, this value is identical to cctActiveEntryPort. If the DS1 is a logical subinterface within the physical port, this value is the number of the DS1 within this slot. Examples: 8 port DS1 card - cctActiveEntryPort and cctActiveEntryDs1 will have identical values. 3 port T3 card - cctActiveEntryPort represents T3 ports. cctActiveEntryEntryDs1 represents logical T1 interfaces. Each T3 contains 28 T1 interfaces. The T1 interfaces are numbered sequentially across the entire T3 card." ::= { cctActiveEntry 20 } cctActiveEntryChannel OBJECT-TYPE SYNTAX INTEGER(0..214783647) ACCESS read-only STATUS mandatory DESCRIPTION "The channel or timeslot within the cctActiveEntryDs1 allocated to the call." ::= { cctActiveEntry 21 } cctActiveCalledPartyId OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) -- Rsyntax OCTET STRING(SIZE(0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The called telephone number for this call. For calls answered by the system, this corresponds to the Dialed Number Identification (DNIS). For calls originated by the system, this is the destination number. If not available this is a zero-length string." ::= { cctActiveEntry 22 } cctActiveCallingPartyId OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) -- Rsyntax OCTET STRING(SIZE(0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The calling telephone number for this call. For calls answered by the system, this corresponds to the calling identification (CLID). For calls originated by the system, this is the number associated with the device. For the interworking call, this object contains the translated calling party number if there is a translation rule is associated with dial plan for making this outgoing call. If not available this is a zero-length string." ::= { cctActiveEntry 23 } cctActiveMpBundleId OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Multilink PPP bundle identification for call if cctActiveServiceType has the value 'mp'. If the value of cctActiveServiceType for this call is not 'mp', then the value of this object is not meaningful." ::= { cctActiveEntry 24 } cctActiveChargedUnits OBJECT-TYPE SYNTAX AbsoluteCounter32 -- Rsyntax Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of charged units for this connection. For incoming calls or if charging information is not supplied by the switch, the value of this object will be zero." REFERENCE "AOC-D defined in ETSI Standard: ETS 300 179" ::= { cctActiveEntry 25 } cctActiveReceiveBytes OBJECT-TYPE SYNTAX AbsoluteCounter32 -- Rsyntax Gauge -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "The number of bytes received on the call. All the 'raw' bytes are counted including any protocol headers which may or may not be present depending on the value of cctActiveServiceType." ::= { cctActiveEntry 26 } cctActiveTransmitBytes OBJECT-TYPE SYNTAX AbsoluteCounter32 -- Rsyntax Gauge -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "The number of bytes transmitted on the call. All the 'raw' bytes are counted including any protocol headers which may or may not be present depending on the value of cctActiveServiceType." ::= { cctActiveEntry 27 } cctActiveCallSignalingType OBJECT-TYPE SYNTAX CctCallSigType -- Rsyntax INTEGER { -- unknown(1), -- external(2), -- q931(3), -- autoDetect(4) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Signaling type used to setup the call." ::= { cctActiveEntry 28 } cctHistoryTableEntriesLimit OBJECT-TYPE SYNTAX Gauge(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The upper limit on the number of entries that the cctHistoryTable may contain. A value of zero will prevent any history from being retained. This value may not exceed the system specific limit provided in cctHistoryTableMaxEntries." ::= { cctHistory 1 } cctHistoryTableMaxEntries OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The maximum allowed table length supported by this system. The value of cctHistoryTableEntriesLimit may not exceed this value." ::= { cctHistory 2 } cctHistoryTableRetainTimer OBJECT-TYPE SYNTAX Gauge(0..2147483647) -- Units -- minutes ACCESS read-write STATUS mandatory DESCRIPTION "The maximum amount of time that an entry will be maintained within the cctHistoryTable before being deleted. A value of zero will prevent any history from being retained." ::= { cctHistory 3 } cctHistoryTableNumberEntries OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of entries currently in the cctHistoryTable." ::= { cctHistory 4 } cctHistoryTableHighWaterMark OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of entries present in cctHistoryTable since last system re-initialization or the value of cctHistoryTableEntriesLimit has been changed. This corresponds to the maximum value reported by cctHistoryTableNumberEntries. Changing the value of cctHistoryTableEntriesLimit resets this value to zero." ::= { cctHistory 5 } cctHistoryTableNewestIndex OBJECT-TYPE SYNTAX Gauge(0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the index value of the most recent entry currently in the cctHistoryTable. A value of zero indicates there has never been an entry in the table or all entries have expired." ::= { cctHistory 6 } cctHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF CctHistoryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides information on terminated calls." ::= { cctHistory 7 } cctHistoryEntry OBJECT-TYPE SYNTAX CctHistoryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The information regarding a single terminated call. An entry of this table is created when the system initiates, detects, or is notified of a call termination. Resources allocated to the call may still be in use by the call when the entry is created. An entry is deleted when it has existed in this table longer than cctHistoryTableRetainTimer minutes. An entry is also removed if the table is full and a new entry needs to be created to accommodate a terminated call. The oldest entry in the table will be deleted." INDEX { cctHistoryIndex } ::= { cctHistoryTable 1 } CctHistoryEntry ::= SEQUENCE { cctHistoryIndex Gauge, cctHistoryCallId CctCallId, cctHistorySetupTime TimeStamp, cctHistoryOrigin INTEGER, cctHistoryConnectionTime TimeStamp, cctHistoryPhysicalLayerReadyTime TimeStamp, cctHistoryServiceUpTime TimeStamp, cctHistoryServiceType CctServiceType, cctHistoryUserValidationTime TimeStamp, cctHistoryUserId DisplayString, cctHistoryUserIpAddr IpAddress, cctHistoryUserSubnetMask IpAddress, cctHistoryAccountingSessionId DisplayString, cctHistoryCallCategory CctCallCategory, cctHistoryInitialRxRate Gauge, cctHistoryInitialTxRate Gauge, cctHistoryResourceSlot INTEGER, cctHistoryResourcePort INTEGER, cctHistoryEntrySlot INTEGER, cctHistoryEntryPort INTEGER, cctHistoryEntryDs1 INTEGER, cctHistoryEntryChannel INTEGER, cctHistoryCalledPartyId DisplayString, cctHistoryCallingPartyId DisplayString, cctHistoryMpBundleId Gauge, cctHistoryChargedUnits Gauge, cctHistoryReceiveBytes Gauge, cctHistoryTransmitBytes Gauge, cctHistoryDisconnectTime TimeStamp, cctHistoryDisconnectReasonText DisplayString, cctHistoryCallSignalingType CctCallSigType } cctHistoryIndex OBJECT-TYPE SYNTAX Gauge(1..4294967295) ACCESS not-accessible STATUS mandatory DESCRIPTION "A monotonically increasing integer for the sole purpose of indexing terminated calls. When it reaches the maximum value the agent wraps the value back to 1 and will flush existing entries." ::= { cctHistoryEntry 1 } cctHistoryCallId OBJECT-TYPE SYNTAX CctCallId -- Rsyntax Gauge(1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The call identifier for the call. This is the same value assigned to the call in cctActiveCallId when it was in the cctActiveTable. It is possible for two cctHistoryEntry entries to have the same cctHistoryCallId if one very long running call terminates after the cctActiveCallId has wrapped around and is reassigned to a new short lived call." ::= { cctHistoryEntry 2 } cctHistorySetupTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Value of sysUpTime when the call was first made known to the system." ::= { cctHistoryEntry 3 } cctHistoryOrigin OBJECT-TYPE SYNTAX INTEGER { originate(1), answer(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates how the call was created. originate(1) - The call was initiated locally with the system sending the setup request. Dialout answer(2) - The call was initiated remotely and the system received the setup request. Dialin" ::= { cctHistoryEntry 4 } cctHistoryConnectionTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Value of sysUpTime when the system connected the call." ::= { cctHistoryEntry 5 } cctHistoryPhysicalLayerReadyTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Value of sysUpTime when the physical layer for the call achieved a steady state and the call is ready for higher protocol layers to begin. In the case of modem calls, the physical layer for the call achieves a steady state when the data rates, modulations, and error correcting protocols have been negotiated between the originating and answering modems. This is primarily intended for calls which connect to a processing resource identified by cctHistoryResourceSlot and cctHistoryResourcePort. It also applies to digital calls using adaptive rate technologies such as V.110 and V.120." ::= { cctHistoryEntry 6 } cctHistoryServiceUpTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Value of sysUpTime when the call service type identified in cctHistoryServiceType was established." ::= { cctHistoryEntry 7 } cctHistoryServiceType OBJECT-TYPE SYNTAX CctServiceType -- Rsyntax INTEGER { -- none(1), -- other(2), -- slip(3), -- ppp(4), -- mp(5), -- tcpClear(6), -- telnet(7), -- exec(8), -- l2f(9), -- l2tp(10) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Service associated with the call. This is the highest level of service known to the system for the call. The service represents the encapsulation protocol layer active for the call. In the case of multiple services on a given call, the last service activated will be reported." ::= { cctHistoryEntry 8 } cctHistoryUserValidationTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Value of sysUpTime when the user identification associated with this call was validated. See cctHistoryUserId for description of user identification." ::= { cctHistoryEntry 9 } cctHistoryUserId OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The User login ID or zero length string if unavailable. If this contains a non-zero length string, and cctHistoryUserValidationTime is zero, then the user failed validation." ::= { cctHistoryEntry 10 } cctHistoryUserIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address assigned to the cctHistoryUserId for this call or 0.0.0.0 if not applicable or unavailable." ::= { cctHistoryEntry 11 } cctHistoryUserSubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP subnet mask assigned to the cctHistoryUserId for this call or 0.0.0.0 if not applicable or unavailable." ::= { cctHistoryEntry 12 } cctHistoryAccountingSessionId OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Accounting session identification assigned to this call by AAA. The session ID is sent by AAA to RADIUS as the Acct-Session-Id attribute or TACACS+ as the task_id. If no accounting session ID is assigned, the value is a null string." REFERENCE "RFC 2139 RADIUS Accounting The TACACS+ Protocol Version 1.78, Internet Draft" ::= { cctHistoryEntry 13 } cctHistoryCallCategory OBJECT-TYPE SYNTAX CctCallCategory -- Rsyntax INTEGER { -- none(1), -- other(2), -- modem(3), -- isdnSync(4), -- v110(5), -- v120(6), -- casDigital(7), -- mgcpData(8), -- syncData(9), -- lapb-ta(10) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The call category or type" ::= { cctHistoryEntry 14 } cctHistoryInitialRxRate OBJECT-TYPE SYNTAX Gauge -- Units -- bits per second ACCESS read-only STATUS mandatory DESCRIPTION "Initial receive data rate for this call. If call is a synchronous digital call such as ISDN sync, this value is the data rate of the B-channel. If call is asynchronous, even if using a synchronous transmission medium such as ISDN, the value is determined by the resource providing the asynchronous processing. For modem calls, this value corresponds to the value of cmRXRate from CISCO-MODEM-MGMT-MIB, immediately after the modem has completed initial negotiations. This value does not change, even if the data rate varies during the call. This value will be zero if the call terminated prior to an initial data rate determination." ::= { cctHistoryEntry 15 } cctHistoryInitialTxRate OBJECT-TYPE SYNTAX Gauge -- Units -- bits per second ACCESS read-only STATUS mandatory DESCRIPTION "Initial transmit data rate for this call. If call is a synchronous digital call such as ISDN sync, this value is the data rate of the B-channel. If call is asynchronous, even if using a synchronous transmission medium such as ISDN, the value is determined by the resource providing the asynchronous processing. For modem calls, this value corresponds to the value of cmTXRate from CISCO-MODEM-MGMT-MIB, immediately after the modem has completed initial negotiations. This value does not change, even if the data rate varies during the call. This value will be zero if the call terminated prior to an initial data rate determination." ::= { cctHistoryEntry 16 } cctHistoryResourceSlot OBJECT-TYPE SYNTAX INTEGER(-1..214783647) ACCESS read-only STATUS mandatory DESCRIPTION "Identification of processing resource allocated to call. In the case of a call requiring a modem resource, this is the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB. This value along with cctHistoryResourcePort uniquely identifies a resource port. Value is -1 if call does not utilize such a resource." ::= { cctHistoryEntry 17 } cctHistoryResourcePort OBJECT-TYPE SYNTAX INTEGER(-1..214783647) ACCESS read-only STATUS mandatory DESCRIPTION "Identification of processing resource allocated to call. In the case of a call requiring a modem resource, this is the value of cmPortIndex from CISCO-MODEM-MGMT-MIB. This value along with cctHistoryResourceSlot uniquely identifies a resource port. Value is -1 if call does not utilize such a resource." ::= { cctHistoryEntry 18 } cctHistoryEntrySlot OBJECT-TYPE SYNTAX INTEGER(0..214783647) ACCESS read-only STATUS mandatory DESCRIPTION "The device slot containing the port on which the call existed." ::= { cctHistoryEntry 19 } cctHistoryEntryPort OBJECT-TYPE SYNTAX INTEGER(0..214783647) ACCESS read-only STATUS mandatory DESCRIPTION "The physical port within the device slot on which the call existed." ::= { cctHistoryEntry 20 } cctHistoryEntryDs1 OBJECT-TYPE SYNTAX INTEGER(0..214783647) ACCESS read-only STATUS mandatory DESCRIPTION "The DS1 link containing the call. This may be a DS1 contained within a larger grouping of multiple DS1s within a single physical port. If the physical port is of type DS1, this value is identical to cctActiveEntryPort. If the DS1 is a logical subinterface within the physical port, this value is the number of the DS1 within this slot. Examples: 8 port DS1 card - cctActiveEntryPort and cctActiveEntryDs1 will have identical values. 3 port T3 card - cctActiveEntryPort represents T3 ports. cctActiveEntryEntryDs1 represents logical T1 interfaces. Each T3 contains 28 T1 interfaces. The T1 interfaces are numbered sequentially across the entire T3 card." ::= { cctHistoryEntry 22 } cctHistoryEntryChannel OBJECT-TYPE SYNTAX INTEGER(0..214783647) ACCESS read-only STATUS mandatory DESCRIPTION "The channel or timeslot within the cctHistoryEntryDs1 which was allocated to the call." ::= { cctHistoryEntry 23 } cctHistoryCalledPartyId OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) -- Rsyntax OCTET STRING(SIZE(0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The called telephone number for this call. For calls answered by the system, this corresponds to the Dialed Number Identification (DNIS). For calls originated by the system, this is the destination number. If not available the string length is zero." ::= { cctHistoryEntry 24 } cctHistoryCallingPartyId OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) -- Rsyntax OCTET STRING(SIZE(0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The calling telephone number for this call. For calls answered by the system, this corresponds to the calling identification (CLID). For calls originated by the system, this is the number associated with the device. For the interworking call, this object contains the translated calling party number if there is a translation rule is associated with dial plan for making this outgoing call. If not available this is a zero-length string." ::= { cctHistoryEntry 25 } cctHistoryMpBundleId OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Multilink PPP bundle identification for call if cctHistoryServiceType has the value 'mp'. If the value of cctHistoryServiceType for this call is not 'mp', then the value of this object is not meaningful." ::= { cctHistoryEntry 26 } cctHistoryChargedUnits OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of charged units for this connection. For incoming calls or if charging information is not supplied by the switch, the value of this object will be zero." REFERENCE "AOC-D defined in ETSI Standard: ETS 300 179" ::= { cctHistoryEntry 27 } cctHistoryReceiveBytes OBJECT-TYPE SYNTAX Gauge -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "The number of bytes received on the call. All the 'raw' bytes are counted including any protocol headers which may or may not be present depending on the value of cctHistoryServiceType." ::= { cctHistoryEntry 28 } cctHistoryTransmitBytes OBJECT-TYPE SYNTAX Gauge -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "The number of bytes transmitted on the call. All the 'raw' bytes are counted including any protocol headers which may or may not be present depending on the value of cctHistoryServiceType." ::= { cctHistoryEntry 29 } cctHistoryDisconnectTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Value of sysUpTime when call was disconnected. This is when the system initiates, detects, or is notified of call termination. This is the call duration from initial setup request." ::= { cctHistoryEntry 30 } cctHistoryDisconnectReasonText OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Text description of the disconnect reason provided. Value is zero-length string if no text is available." ::= { cctHistoryEntry 31 } cctHistoryCallSignalingType OBJECT-TYPE SYNTAX CctCallSigType -- Rsyntax INTEGER { -- unknown(1), -- external(2), -- q931(3), -- autoDetect(4) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Signaling type used to setup the call." ::= { cctHistoryEntry 32 } cctCallSetupTermNotifyEnable OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This variable controls generation of cctCallSetupNotification and cctCallTerminateNotification. When this variable is 'true(1)', generation of these notifications is enabled. When this variable is 'false(2)', generation is disabled. The default value is 'false(2)'." ::= { cctNotificationConfig 1 } cctCallSetupNotification TRAP-TYPE -- Reverse mappable trap ENTERPRISE cctMIBNotificationPrefix VARIABLES { cctActiveSetupTime, cctActiveCalledPartyId, cctActiveCallingPartyId, cctActiveCallCategory } -- Status -- mandatory DESCRIPTION "A Call Tracker Setup notification is generated whenever a new active call entry is created in the cctActiveTable." ::= 1 cctCallTerminateNotification TRAP-TYPE -- Reverse mappable trap ENTERPRISE cctMIBNotificationPrefix VARIABLES { cctHistoryCallId } -- Status -- mandatory DESCRIPTION "A Call Tracker Terminate notification is generated whenever a new history call entry is created in the cctHistoryTable." ::= 2 cctGeneralGroup OBJECT IDENTIFIER ::= { cctMIBGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing the -- general information. -- objects -- cctCallIdPrefix cctActiveGroup OBJECT IDENTIFIER ::= { cctMIBGroups 2 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- A collection of objects providing the -- active call information. -- objects -- cctActiveTableNumberEntries, cctActiveTableHighWaterMark, -- cctActiveSetupTime, cctActiveOrigin, cctActiveConnectionTime, -- cctActivePhysicalLayerReadyTime, cctActiveServiceUpTime, -- cctActiveServiceType, cctActiveUserValidationTime, -- cctActiveUserId, cctActiveUserIpAddr, cctActiveUserSubnetMask, -- cctActiveAccountingSessionId, cctActiveCallCategory, -- cctActiveInitialRxRate, cctActiveInitialTxRate, -- cctActiveResourceSlot, cctActiveResourcePort, -- cctActiveEntrySlot, cctActiveEntryPort, cctActiveEntryDs1, -- cctActiveEntryChannel, cctActiveCalledPartyId, -- cctActiveCallingPartyId, cctActiveMpBundleId, -- cctActiveChargedUnits, cctActiveReceiveBytes, -- cctActiveTransmitBytes cctHistoryGroup OBJECT IDENTIFIER ::= { cctMIBGroups 3 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- A collection of objects providing the -- historical call information. -- objects -- cctHistoryTableEntriesLimit, cctHistoryTableMaxEntries, -- cctHistoryTableRetainTimer, cctHistoryTableNumberEntries, -- cctHistoryTableHighWaterMark, cctHistoryTableNewestIndex, -- cctHistoryCallId, cctHistorySetupTime, cctHistoryOrigin, -- cctHistoryConnectionTime, cctHistoryPhysicalLayerReadyTime, -- cctHistoryServiceUpTime, cctHistoryServiceType, -- cctHistoryUserValidationTime, cctHistoryUserId, -- cctHistoryUserIpAddr, cctHistoryUserSubnetMask, -- cctHistoryAccountingSessionId, cctHistoryCallCategory, -- cctHistoryInitialRxRate, cctHistoryInitialTxRate, -- cctHistoryResourceSlot, cctHistoryResourcePort, -- cctHistoryEntrySlot, cctHistoryEntryPort, cctHistoryEntryDs1, -- cctHistoryEntryChannel, cctHistoryCalledPartyId, -- cctHistoryCallingPartyId, cctHistoryMpBundleId, -- cctHistoryChargedUnits, cctHistoryReceiveBytes, -- cctHistoryTransmitBytes, cctHistoryDisconnectTime, -- cctHistoryDisconnectReasonText cctNotificationConfigGroup OBJECT IDENTIFIER ::= { cctMIBGroups 4 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing the -- notification configuration. -- objects -- cctCallSetupTermNotifyEnable cctActiveGroupRev1 OBJECT IDENTIFIER ::= { cctMIBGroups 6 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing the -- active call information. -- objects -- cctActiveTableNumberEntries, cctActiveTableHighWaterMark, -- cctActiveSetupTime, cctActiveOrigin, cctActiveConnectionTime, -- cctActivePhysicalLayerReadyTime, cctActiveServiceUpTime, -- cctActiveServiceType, cctActiveUserValidationTime, -- cctActiveUserId, cctActiveUserIpAddr, cctActiveUserSubnetMask, -- cctActiveAccountingSessionId, cctActiveCallCategory, -- cctActiveInitialRxRate, cctActiveInitialTxRate, -- cctActiveResourceSlot, cctActiveResourcePort, -- cctActiveEntrySlot, cctActiveEntryPort, cctActiveEntryDs1, -- cctActiveEntryChannel, cctActiveCalledPartyId, -- cctActiveCallingPartyId, cctActiveMpBundleId, -- cctActiveChargedUnits, cctActiveReceiveBytes, -- cctActiveTransmitBytes, cctActiveCallSignalingType cctHistoryGroupRev1 OBJECT IDENTIFIER ::= { cctMIBGroups 7 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing the -- historical call information. -- objects -- cctHistoryTableEntriesLimit, cctHistoryTableMaxEntries, -- cctHistoryTableRetainTimer, cctHistoryTableNumberEntries, -- cctHistoryTableHighWaterMark, cctHistoryTableNewestIndex, -- cctHistoryCallId, cctHistorySetupTime, cctHistoryOrigin, -- cctHistoryConnectionTime, cctHistoryPhysicalLayerReadyTime, -- cctHistoryServiceUpTime, cctHistoryServiceType, -- cctHistoryUserValidationTime, cctHistoryUserId, -- cctHistoryUserIpAddr, cctHistoryUserSubnetMask, -- cctHistoryAccountingSessionId, cctHistoryCallCategory, -- cctHistoryInitialRxRate, cctHistoryInitialTxRate, -- cctHistoryResourceSlot, cctHistoryResourcePort, -- cctHistoryEntrySlot, cctHistoryEntryPort, cctHistoryEntryDs1, -- cctHistoryEntryChannel, cctHistoryCalledPartyId, -- cctHistoryCallingPartyId, cctHistoryMpBundleId, -- cctHistoryChargedUnits, cctHistoryReceiveBytes, -- cctHistoryTransmitBytes, cctHistoryDisconnectTime, -- cctHistoryDisconnectReasonText, cctHistoryCallSignalingType cctNotificationGroup OBJECT IDENTIFIER ::= { cctMIBGroups 5 } -- NOTIFICATION-GROUP -- Status -- mandatory -- Descr -- The collection of notifications used for -- call status changes. -- notifications -- cctCallSetupNotification, cctCallTerminateNotification cctMIBCompliance OBJECT IDENTIFIER ::= { cctMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The compliance statement for entities which -- implement the CISCO CALL TRACKER MIB -- Module -- >>current<< -- MandGroup -- cctGeneralGroup -- MandGroup -- cctActiveGroup -- MandGroup -- cctHistoryGroup -- MandGroup -- cctNotificationConfigGroup -- MandGroup -- cctNotificationGroup cctMIBComplianceRev1 OBJECT IDENTIFIER ::= { cctMIBCompliances 2 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for entities which -- implement the CISCO CALL TRACKER MIB -- Module -- >>current<< -- MandGroup -- cctGeneralGroup -- MandGroup -- cctActiveGroupRev1 -- MandGroup -- cctHistoryGroupRev1 -- MandGroup -- cctNotificationConfigGroup -- MandGroup -- cctNotificationGroup END