-- MIB file created 23-Nov-2010 17:01:46, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com CISCO-CAS-IF-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-CAS-IF-MIB.my" -- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T" IMPORTS RowStatus, TruthValue, DisplayString FROM SNMPv2-TC-v1 InterfaceIndex, ifIndex FROM IF-MIB CountryCode FROM CISCO-TC ciscoMgmt FROM CISCO-SMI OBJECT-TYPE FROM RFC-1212; ciscoCasIfMIB OBJECT IDENTIFIER ::= { ciscoMgmt 85 } -- MODULE-IDENTITY -- LastUpdated -- 200410130000Z -- OrgName -- Cisco Systems, Inc. -- ContactInfo -- Cisco Systems -- Customer Service -- -- Postal: 170 W. Tasman Drive -- San Jose, CA 95134 -- USA -- -- Tel: +1 800 553-NETS -- -- E-mail: cs-voice@cisco.com -- Descr -- Channel Associated Signal Interface MIB module. -- This MIB manages the generic CAS (Channel Associated -- Signal)or DS0 clear channel Interfaces in the router. -- RevDate -- 200410130000Z -- RevDescr -- Extend CcasGrpEMTmEntry to include -- ccasGrpEMTmPttXmt -- ccasGrpEMTmPttRcv -- ccasGrpEMTmDelayVoice -- Extend CcasGrpEMCfgEntry to include -- ccasGrpEMCfgAutoGainControl -- add ccasEMGroupRev2 -- add ccasIfMIBComplianceRev3 -- RevDate -- 200409300000Z -- RevDescr -- Extend ccasGrpCfgServiceType to include -- xgcp (11) -- RevDate -- 200401150000Z -- RevDescr -- Deprecated ccasEMGroup -- Add ccasEMGroupRev1 -- Extend ccasGrpCfgType to include emLmr (27) -- Extend CcasGrpEMCfgEntry to include -- ccasGrpEMCfgLmrMCap & ccasGrpEMCfgLmrECap -- Extend CcasGrpEMTmEntry to include -- ccasGrpEMTmVoiceHangover & -- ccasGrpEMTmLmrTeardown -- RevDate -- 200304180000Z -- RevDescr -- Extend ccasGrpCfgServiceType to include -- h248 (9) and ds0xconn (10) -- RevDate -- 200210020000Z -- RevDescr -- Extend ccasGrpCfgServiceType to include -- trunkingService(8). -- RevDate -- 9901180000Z -- RevDescr -- Add ccasXgcpCfgTable to configure continuity test -- (COT) tone frequencies. -- Add object ccasGrpCfgServiceType for displaying service -- type. -- Extend ccsaGrpCfgType to include fgdOS, fgdEANA and -- nullSignaling ccasIfObjects OBJECT IDENTIFIER ::= { ciscoCasIfMIB 1 } ccasDS1Objects OBJECT IDENTIFIER ::= { ccasIfObjects 1 } ccasGrpObjects OBJECT IDENTIFIER ::= { ccasIfObjects 2 } ccasChannelObjects OBJECT IDENTIFIER ::= { ccasIfObjects 3 } ccasVoiceCfgObjects OBJECT IDENTIFIER ::= { ccasIfObjects 4 } ccasXgcpCfgObjects OBJECT IDENTIFIER ::= { ccasIfObjects 5 } ccasGrpGeneralObjects OBJECT IDENTIFIER ::= { ccasGrpObjects 1 } ccasGrpEMObjects OBJECT IDENTIFIER ::= { ccasGrpObjects 2 } ccasGrpLineObjects OBJECT IDENTIFIER ::= { ccasGrpObjects 3 } ccasGrpStaObjects OBJECT IDENTIFIER ::= { ccasGrpObjects 4 } ccasGrpABCDObjects OBJECT IDENTIFIER ::= { ccasGrpObjects 5 } ccasIfMIBConformance OBJECT IDENTIFIER ::= { ciscoCasIfMIB 3 } ccasIfMIBCompliances OBJECT IDENTIFIER ::= { ccasIfMIBConformance 1 } ccasIfMIBGroups OBJECT IDENTIFIER ::= { ccasIfMIBConformance 2 } ccasDs1IfCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CcasDs1IfCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The CAS/DS0 General Configuration Table for T1/E1. It contains the CAS/DS0 related standard configuration information for T1/E1." ::= { ccasDS1Objects 1 } ccasDs1IfCfgEntry OBJECT-TYPE SYNTAX CcasDs1IfCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the configuration table for each T1/E1. The entry is created when a T1/E1 hardware is detected." INDEX { ifIndex } ::= { ccasDs1IfCfgTable 1 } CcasDs1IfCfgEntry ::= SEQUENCE { ccasDs1IfCfgDs0ChannelsConfigurable OCTET STRING } ccasDs1IfCfgDs0ChannelsConfigurable OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the bit map of the available DS0 channel in the DS1. The MSB (most significant bit) is DS0 channel number 1. The missing bytes is default to a value of 0. A 1-bit indicates the channel is available for configuration and a 0-bit indicates it isn't. The length of this object is either 3 octets (for T1) or 4 octets (for E1). The most significant bit is transmitted first." ::= { ccasDs1IfCfgEntry 1 } ccasGrpCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CcasGrpCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The CAS/DS0 Group Standard Configuration Table. It contains the general configuration information for the CAS/DS0 group of T1/E1 interfaces." ::= { ccasGrpGeneralObjects 1 } ccasGrpCfgEntry OBJECT-TYPE SYNTAX CcasGrpCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A CAS/DS0 group entry. Each entry consists of the CAS group type and the CAS/DS0 group associated DS0 channels in a T1/E1. The value of ccasGrpCfgDs0Channels must be specified with at least one available DS0 channel in the CAS group associated T1/E1 before a new row in this table can become active(1). The entry of this table can only be created if the CAS/DS0 group associated DS1 ifEntry already exists." INDEX { ifIndex, ccasGrpCfgIndex } ::= { ccasGrpCfgTable 1 } CcasGrpCfgEntry ::= SEQUENCE { ccasGrpCfgIndex INTEGER, ccasGrpCfgType INTEGER, ccasGrpCfgDs0Channels OCTET STRING, ccasGrpCfgServiceType INTEGER, ccasGrpCfgRowStatus RowStatus } ccasGrpCfgIndex OBJECT-TYPE SYNTAX INTEGER(0..30) ACCESS not-accessible STATUS mandatory DESCRIPTION "An arbitrary index that uniquely identifies a DS0 group in a T1/E1." ::= { ccasGrpCfgEntry 1 } ccasGrpCfgType OBJECT-TYPE SYNTAX INTEGER { emWinkStart(1), emWinkStartFgd(2), emImmedStart(3), emDelayDial(4), fxsLoopStart(5), fxsGroundStart(6), sasLoopStart(7), sasGroundStart(8), r2Analog(9), r2Digital(10), r2Pulse(11), p7(12), fxoLoopStart(13), fxoGroundStart(14), fgdOS(15), nullSignaling(16), r1Itu(17), r1Modified(18), r1Turkey(19), fgdEANA(20), emMelImmedStart(21), emMelWink(22), emMelDelayDial(23), fxsMelcas(24), fxoMelcas(25), extsig(26), emLmr(27) } ACCESS read-write STATUS mandatory DESCRIPTION "The Signaling type of the DS0 group. emWinkStart - CAS E&M Wink Start. emWinkStartFgd - CAS E&M Wink Start with Feature group D. emImmedStart - CAS E&M Immediate Start. emDelayDial - CAS E&M Delay Dial. fxsLoopStart - CAS FXS Loop Start. fxsGroundStart - CAS FXS Ground Start. sasLoopStart - CAS SAS Loop Start. sasGroundStart - CAS SAS Ground Start. r2Analog - R2 ITU Q411. r2Digital - R2 ITU Q421. r2Pulse - R2 ITU Supplement 7. p7 - P7 switch. fgdOS - Bellcore Feature Group D : Operator Services Signaling nullSignaling - 64k clear channel r1Itu - R1 ITU. r1Modified - R1 Modified. r1Turkey - R1 Turkey. fgdEANA - FGD Exchange Access North American. emMelImmedStart - CAS E&M Melcas Immediate Start emMelWink - CAS E&M Melcas Wink Start emMelDelayDial - CAS E&M Melcas Delay Dial fxsMelcas - CAS FXS Melcas fxoMelcas - CAS FXO Melcas extsig - External Signal emLmr - CAS E&M Land Mobil Radio(LMR) interface" REFERENCE "EIA/TIA-464B, chapter 6.2.1.1 Signaling Interface Types. ITU-T Q411 - Specifications of signalling system R2 line signalling, analogue version. ITU-T Q421 - Specifications of signalling system R2 line signalling, digital version. ITU-T R2 Supplement 7 - Specifications of signalling system R2 line signalling, pulsed version. Bellcore, TR-NPL-000258 - Feature Group D section 3.4 for Exchange Access North American section 3.6 for Operator Services Signaling " DEFVAL { emWinkStart } ::= { ccasGrpCfgEntry 2 } ccasGrpCfgDs0Channels OBJECT-TYPE SYNTAX OCTET STRING(SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "This object contains the bit map of the selected DS0 channels to be added into this group. The MSB (most significant bit) is DS0 channel number 1. For T1, only higher 24 bits are used to specify the the CAS channels for the CAS group. A 1-bit indicates the channel to be added into group and a 0-bit indicates it isn't." DEFVAL { '00000000'H } ::= { ccasGrpCfgEntry 3 } ccasGrpCfgServiceType OBJECT-TYPE SYNTAX INTEGER { none(1), casServSw56(2), casServModem(3), casServAuto(4), sgcp(5), mgcp(6), other(7), trunkingService(8), h248(9), ds0xconn(10), xgcp(11) } ACCESS read-write STATUS mandatory DESCRIPTION "Specify the Service type of the CAS/DS0 group. none - no service type casServSw56 - sw56 service for CAS casServModme - modem service for CAS casServAuto - auto service for CAS sgcp - Simple Gateway Control Protocol (SGCP) service. Used when DS0 is configured for null signaling. mgcp - Media Gateway Control Protocol (MGCP) service. Used when DS0 is configured for null signaling. other - none of the above and the below. trunkingService - This DS0 group is handled by trunking service application. h248 - ITU H.248 Media Gateway Control service. Used when DS0 is configured for null signaling. ds0xconn - Used for DS0 cross connection. xgcp - Media Gateway Control Protocol (MGCP) extension service including TGCP (Trunking Gateway Control Protocol) profiles feature. Used when DS0 is configured for null signaling." DEFVAL { none } ::= { ccasGrpCfgEntry 5 } ccasGrpCfgRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create a new row or modify or delete an existing row in this table. The corresponding instance of ccasGrpCfgType can not be modified while this object has the value 'active'. " ::= { ccasGrpCfgEntry 4 } ccasGrpEMCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CcasGrpEMCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The CAS Group E&M Standard Configuration Table. It contains the CAS E&M group standard configuration information of T1/E1." ::= { ccasGrpEMObjects 1 } ccasGrpEMCfgEntry OBJECT-TYPE SYNTAX CcasGrpEMCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the configuration table for each CAS E&M Group in the T1/E1. The entry is created when the ccasGrpCfgType is configured as 'em' on a T1/E1 via configuration command. The entry is deleted when the CAS Group is de-configured from T1/E1." INDEX { ifIndex, ccasGrpCfgIndex } ::= { ccasGrpEMCfgTable 1 } CcasGrpEMCfgEntry ::= SEQUENCE { ccasGrpEMCfgDialType INTEGER, ccasGrpEMCfgDnisAni OCTET STRING, ccasGrpEMCfgLmrMCap INTEGER, ccasGrpEMCfgLmrECap INTEGER, ccasGrpEMCfgAutoGainControl TruthValue } ccasGrpEMCfgDialType OBJECT-TYPE SYNTAX INTEGER { dtmf(1), pulse(2), mf(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Specify the addressing type of the CAS group. dtmf - Dual Tone Multi-Frequency (DTMF) digit. pulse - dial pulse. mf - Multi-Frequency (MF) digit. The default value of this object is dtmf(1)." ::= { ccasGrpEMCfgEntry 1 } ccasGrpEMCfgDnisAni OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) -- BITS are: -- incomingDnis(0) -- incomingAni(1) -- outgoingDnis(2) -- outgoingAni(3) ACCESS read-write STATUS mandatory DESCRIPTION "Specify the type of Destination Number Identification Service (DNIS) and Automatic Number Identification (ANI) support. MF tone supports both ANI and DNIS services. The DTMF tone only supports both incoming and outgoing DNIS. incomingDnis - support incoming DNIS feature. incomingAni - support incoming ANI feature. outgoingDnis - support outgoing DNIS feature. outgoingAni - support outgoing ANI feature. The default value of this object is '00'H." ::= { ccasGrpEMCfgEntry 2 } ccasGrpEMCfgLmrMCap OBJECT-TYPE SYNTAX INTEGER { inact(1), audio(2), dial(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The M lead behavior of E&M LMR interface. inact - The m-lead status should be ignored. audio - The m-lead status is used to control generating voice packet. dial - The first m-lead off to on status indicates call setup request. The following m-lead status change during the call should be ignored." DEFVAL { inact } ::= { ccasGrpEMCfgEntry 3 } ccasGrpEMCfgLmrECap OBJECT-TYPE SYNTAX INTEGER { seize(4), voice(5), inactive(6) } ACCESS read-write STATUS mandatory DESCRIPTION "The E lead behavior of E&M LMR interface. seize - The e-lead used as seize signal. voice - The e-lead status is used to indicate voice packet received or not. inactive -- e-lead is inactive." DEFVAL { seize } ::= { ccasGrpEMCfgEntry 4 } ccasGrpEMCfgAutoGainControl OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to enabling or disabling automatic gain control on this interface. AGC allows dsp to adjust the input voice volume and avoid rapid voice volume change." DEFVAL { false } ::= { ccasGrpEMCfgEntry 5 } ccasGrpEMTmTable OBJECT-TYPE SYNTAX SEQUENCE OF CcasGrpEMTmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The E&M interface Timing Parameters table. It contains the configuration of the various E&M signaling protocol timing parameters." ::= { ccasGrpEMObjects 2 } ccasGrpEMTmEntry OBJECT-TYPE SYNTAX CcasGrpEMTmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the E&M Timing Parameters Table for each E&M interface." INDEX { ifIndex, ccasGrpCfgIndex } -- Augments ccasGrpEMCfgEntry ::= { ccasGrpEMTmTable 1 } CcasGrpEMTmEntry ::= SEQUENCE { ccasGrpEMTmClearWaitDuration INTEGER, ccasGrpEMTmMaxWinkWaitDuration INTEGER, ccasGrpEMTmMaxWinkDuration INTEGER, ccasGrpEMTmDelayStart INTEGER, ccasGrpEMTmMaxDelayDuration INTEGER, ccasGrpEMTmMinDelayPulseWidth INTEGER, ccasGrpEMTmDigitDuration INTEGER, ccasGrpEMTmInterDigitDuration INTEGER, ccasGrpEMTmPulseRate INTEGER, ccasGrpEMTmPulseInterDigitDuration INTEGER, ccasGrpEMTmVoiceHangover INTEGER, ccasGrpEMTmLmrTeardown INTEGER, ccasGrpEMTmPttXmt INTEGER, ccasGrpEMTmPttRcv INTEGER, ccasGrpEMTmDelayVoice INTEGER } ccasGrpEMTmClearWaitDuration OBJECT-TYPE SYNTAX INTEGER(200..2000) -- Units -- milliseconds ACCESS read-write STATUS mandatory DESCRIPTION "Time of Inactive incoming seizure signal to declare call cleared. This object is relevant to the interfaces in the CAS group if the ccasGrpCfgType object is emWinkStart(1) or emWinkStartFgd(2). The default value of this object is 400 milliseconds." ::= { ccasGrpEMTmEntry 1 } ccasGrpEMTmMaxWinkWaitDuration OBJECT-TYPE SYNTAX INTEGER(100..5000) -- Units -- milliseconds ACCESS read-write STATUS mandatory DESCRIPTION "Maximum wink wait duration for sending out wink start signaling. This object is relevant to the interfaces in the CAS group if the ccasGrpCfgType object is emWinkStart(1) or emWinkStartFgd(2). The default value of this object is 200 milliseconds." ::= { ccasGrpEMTmEntry 2 } ccasGrpEMTmMaxWinkDuration OBJECT-TYPE SYNTAX INTEGER(100..3000) -- Units -- milliseconds ACCESS read-write STATUS mandatory DESCRIPTION "Maximum wink duration for sending out wink start signaling. This object is relevant to the interfaces in the CAS group if the ccasGrpCfgType object is emWinkStart(1) or emWinkStartFgd(2). The default value of this object is 200 milliseconds." ::= { ccasGrpEMTmEntry 3 } ccasGrpEMTmDelayStart OBJECT-TYPE SYNTAX INTEGER(20..2000) -- Units -- milliseconds ACCESS read-write STATUS mandatory DESCRIPTION "Timing of generation of outgoing delayed start signal from detection of incoming seizure. This object is relevant to the interfaces of the CAS group if the ccasGrpCfgType object is emDelayDial(4). The default value of this object is 300 milliseconds." ::= { ccasGrpEMTmEntry 4 } ccasGrpEMTmMaxDelayDuration OBJECT-TYPE SYNTAX INTEGER(100..5000) -- Units -- milliseconds ACCESS read-write STATUS mandatory DESCRIPTION "Maximum delay signal duration for sending out delay dial signaling. This object is relevant to the interfaces in the CAS group if the ccasGrpCfgType object is emDelayDial(4). The default value of this object is 2000 milliseconds." ::= { ccasGrpEMTmEntry 5 } ccasGrpEMTmMinDelayPulseWidth OBJECT-TYPE SYNTAX INTEGER(0|140..5000) -- Units -- milliseconds ACCESS read-write STATUS mandatory DESCRIPTION "Minimum delay-dial pulse duration for incoming call. If the value of this object is 0, then no delay-dial is sent to the far end for the incoming call. This object is relevant to the interfaces in the CAS group if the ccasGrpCfgType object is emDelayDial(4). The default value of this object is 140 milliseconds." ::= { ccasGrpEMTmEntry 6 } ccasGrpEMTmDigitDuration OBJECT-TYPE SYNTAX INTEGER(50..500) -- Units -- milliseconds ACCESS read-write STATUS mandatory DESCRIPTION "Outgoing DTMF/MF digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpCfgDialType is dtmf or R2 tone. The default value of this object is 100 milliseconds." ::= { ccasGrpEMTmEntry 7 } ccasGrpEMTmInterDigitDuration OBJECT-TYPE SYNTAX INTEGER(50..500) -- Units -- milliseconds ACCESS read-write STATUS mandatory DESCRIPTION "Outgoing DTMF/MF inter-digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpCfgDialType is dtmf or R2 tone. The default value of this object is 100 milliseconds." ::= { ccasGrpEMTmEntry 8 } ccasGrpEMTmPulseRate OBJECT-TYPE SYNTAX INTEGER(10..20) -- Units -- pulses per second ACCESS read-write STATUS mandatory DESCRIPTION "Outgoing Pulse dialing rate in pulses per second (pps). This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpCfgDialType is pulse. The default value of this object is 10 pps." ::= { ccasGrpEMTmEntry 9 } ccasGrpEMTmPulseInterDigitDuration OBJECT-TYPE SYNTAX INTEGER(100..1000) -- Units -- milliseconds ACCESS read-write STATUS mandatory DESCRIPTION "Outgoing Pulse dialing inter-digit timing in milliseconds. This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpCfgDialType is pulse. The default value of this object is 500 milliseconds." ::= { ccasGrpEMTmEntry 10 } ccasGrpEMTmVoiceHangover OBJECT-TYPE SYNTAX INTEGER(0..10000) -- Units -- milliseconds ACCESS read-write STATUS mandatory DESCRIPTION "The hangover time used to determine there is no more voice packet arrived. The default value of this object is 250 milliseconds." ::= { ccasGrpEMTmEntry 11 } ccasGrpEMTmLmrTeardown OBJECT-TYPE SYNTAX INTEGER(-1|5..60000) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "LMR port tear down timeout. This object is relevant to the waiting time of teardown call on LMR port. If the value of this object is '-1', then the timeout is disable." DEFVAL { 1800 } ::= { ccasGrpEMTmEntry 12 } ccasGrpEMTmPttXmt OBJECT-TYPE SYNTAX INTEGER(0..30) -- Units -- minutes ACCESS read-write STATUS mandatory DESCRIPTION "This object signifies LMR port maximum transmit time. This object is relevant to how long LMR port can continue transmit voice packet without pause." DEFVAL { 0 } ::= { ccasGrpEMTmEntry 13 } ccasGrpEMTmPttRcv OBJECT-TYPE SYNTAX INTEGER(0..30) -- Units -- minutes ACCESS read-write STATUS mandatory DESCRIPTION "This object signifies LMR port maximum receive time. This object is relevant to how long LMR port can continue receive voice packet without pause." DEFVAL { 0 } ::= { ccasGrpEMTmEntry 14 } ccasGrpEMTmDelayVoice OBJECT-TYPE SYNTAX INTEGER(0..1500) -- Units -- milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "This object is relevant to how long LMR will delay sending the voice packet to the LMR port." DEFVAL { 0 } ::= { ccasGrpEMTmEntry 15 } ccasGrpLineCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CcasGrpLineCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The CAS Group FXS/SAS Standard Configuration Table. It contains the CAS FXS/SAS group standard configuration information of T1/E1." ::= { ccasGrpLineObjects 1 } ccasGrpLineCfgEntry OBJECT-TYPE SYNTAX CcasGrpLineCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the configuration table for each CAS FXS/SAS Group in the T1/E1. The entry is created when the ccasGrpCfgType is configured as 'fxs' or 'sas' on a T1/E1 via configuration command. The entry is deleted when the CAS Group is de-configured from T1/E1." INDEX { ifIndex, ccasGrpCfgIndex } ::= { ccasGrpLineCfgTable 1 } CcasGrpLineCfgEntry ::= SEQUENCE { ccasGrpLineCfgNumberRings INTEGER, ccasGrpLineCfgSupDisconnect TruthValue, ccasGrpLineCfgDialType INTEGER } ccasGrpLineCfgNumberRings OBJECT-TYPE SYNTAX INTEGER(0..10) -- Units -- rings ACCESS read-write STATUS mandatory DESCRIPTION "The number of rings detected before closing loop. If the value of this object is 0, then the managed system answers immediately after the interface detects a incoming seizure if the ccasGrpCfgType is 'fxsGroundStart' or 'sasGroundStart'. The default value of this object is 1 ring." ::= { ccasGrpLineCfgEntry 1 } ccasGrpLineCfgSupDisconnect OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION " Specifies whether a supervisory disconnect signal will be presented to the interface when the connected party at the interface hangs up. this object is only relevant to the ccasGrpCfgType is fxsLoopStart or sasLoopStart. The default value of this object is 'true'." ::= { ccasGrpLineCfgEntry 2 } ccasGrpLineCfgDialType OBJECT-TYPE SYNTAX INTEGER { dtmf(1), pulse(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specify the addressing type of the CAS group. dtmf - Dual Tone Multi-Frequency (DTMF) digit. pulse - dial pulse. The default value of this object is dtmf(1)." ::= { ccasGrpLineCfgEntry 3 } ccasGrpLineTmTable OBJECT-TYPE SYNTAX SEQUENCE OF CcasGrpLineTmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The FXS/SAS interface Timing Parameters table. It contains the configuration of the various FXS/SAS signaling protocol timing parameters." ::= { ccasGrpLineObjects 2 } ccasGrpLineTmEntry OBJECT-TYPE SYNTAX CcasGrpLineTmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the FXS/SAS Timing Parameters Table for each FXS/SAS interface." INDEX { ifIndex, ccasGrpCfgIndex } -- Augments ccasGrpLineCfgEntry ::= { ccasGrpLineTmTable 1 } CcasGrpLineTmEntry ::= SEQUENCE { ccasGrpLineTmDigitDuration INTEGER, ccasGrpLineTmInterDigitDuration INTEGER, ccasGrpLineTmPulseRate INTEGER, ccasGrpLineTmPulseInterDigitDuration INTEGER } ccasGrpLineTmDigitDuration OBJECT-TYPE SYNTAX INTEGER(50..500) -- Units -- milliseconds ACCESS read-write STATUS mandatory DESCRIPTION "Outgoing DTMF digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpLineCfgDialType is dtmf. The default value of this object is 100 milliseconds." ::= { ccasGrpLineTmEntry 1 } ccasGrpLineTmInterDigitDuration OBJECT-TYPE SYNTAX INTEGER(50..500) -- Units -- milliseconds ACCESS read-write STATUS mandatory DESCRIPTION "Outgoing DTMF inter-digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpLineCfgDialType is dtmf. The default value of this object is 100 milliseconds." ::= { ccasGrpLineTmEntry 2 } ccasGrpLineTmPulseRate OBJECT-TYPE SYNTAX INTEGER(10..20) -- Units -- pulses per second ACCESS read-write STATUS mandatory DESCRIPTION "Outgoing Pulse dialing rate in pulses per second (pps). This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpStaCfgDialType is pulse. The default value of this object is 10 pps." ::= { ccasGrpLineTmEntry 3 } ccasGrpLineTmPulseInterDigitDuration OBJECT-TYPE SYNTAX INTEGER(100..1000) -- Units -- milliseconds ACCESS read-write STATUS mandatory DESCRIPTION "Outgoing Pulse dialing inter-digit timing in milliseconds. This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpStaCfgDialType is pulse. The default value of this object is 500 milliseconds." ::= { ccasGrpLineTmEntry 4 } ccasGrpStaCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CcasGrpStaCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The FXO/SAO standard configuration table. It contains FXO/SAO configuration parameters, one entry per FXO/SAO interface. The configuration information of this table is set by its default setting when the CAS group is created by the configuration commands." ::= { ccasGrpStaObjects 1 } ccasGrpStaCfgEntry OBJECT-TYPE SYNTAX CcasGrpStaCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the standard configuration table for each FXO/SAO Group. The entry is created when the ccasGrpCfgType is configured as 'fxo' or 'sao' on a T1/E1 via configuration command. The entry is deleted when the CAS Group is de-configured from T1/E1." INDEX { ifIndex, ccasGrpCfgIndex } ::= { ccasGrpStaCfgTable 1 } CcasGrpStaCfgEntry ::= SEQUENCE { ccasGrpStaCfgNumberRings INTEGER, ccasGrpStaCfgDialType INTEGER } ccasGrpStaCfgNumberRings OBJECT-TYPE SYNTAX INTEGER(0..1000) -- Units -- rings ACCESS read-write STATUS mandatory DESCRIPTION "The number of rings sent before sending reorder to the originator and releasing resources. If the value of this object is 0, then sending reorder to the originator is disabled. The default value of this object is 20 rings." ::= { ccasGrpStaCfgEntry 1 } ccasGrpStaCfgDialType OBJECT-TYPE SYNTAX INTEGER { dtmf(1), pulse(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specify the addressing type of the CAS group. dtmf - Dual Tone Multi-Frequency (DTMF) digit. pulse - dial pulse. The default value of this object is dtmf(1)." ::= { ccasGrpStaCfgEntry 2 } ccasGrpStaTmTable OBJECT-TYPE SYNTAX SEQUENCE OF CcasGrpStaTmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The FXO/SAO interface Timing Parameters table. It contains the configuration of the various FXO/SAO signaling protocol timing parameters." ::= { ccasGrpStaObjects 2 } ccasGrpStaTmEntry OBJECT-TYPE SYNTAX CcasGrpStaTmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the FXO/SAO Timing Parameters Table for each FXO/SAO interface." INDEX { ifIndex, ccasGrpCfgIndex } -- Augments ccasGrpStaCfgEntry ::= { ccasGrpStaTmTable 1 } CcasGrpStaTmEntry ::= SEQUENCE { ccasGrpStaTmDigitDuration INTEGER, ccasGrpStaTmInterDigitDuration INTEGER, ccasGrpStaTmPulseRate INTEGER, ccasGrpStaTmPulseInterDigitDuration INTEGER } ccasGrpStaTmDigitDuration OBJECT-TYPE SYNTAX INTEGER(50..500) -- Units -- milliseconds ACCESS read-write STATUS mandatory DESCRIPTION "Outgoing DTMF digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpStaCfgDialType is dtmf. The default value of this object is 100 milliseconds." ::= { ccasGrpStaTmEntry 1 } ccasGrpStaTmInterDigitDuration OBJECT-TYPE SYNTAX INTEGER(50..500) -- Units -- milliseconds ACCESS read-write STATUS mandatory DESCRIPTION "Outgoing DTMF inter-digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpStaCfgDialType is dtmf. The default value of this object is 100 milliseconds." ::= { ccasGrpStaTmEntry 2 } ccasGrpStaTmPulseRate OBJECT-TYPE SYNTAX INTEGER(10..20) -- Units -- pulses per second ACCESS read-write STATUS mandatory DESCRIPTION "Outgoing Pulse dialing rate in pulses per second (pps). This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpStaCfgDialType is pulse. The default value of this object is 10 pps." ::= { ccasGrpStaTmEntry 3 } ccasGrpStaTmPulseInterDigitDuration OBJECT-TYPE SYNTAX INTEGER(100..1000) -- Units -- milliseconds ACCESS read-write STATUS mandatory DESCRIPTION "Outgoing Pulse dialing inter-digit timing in milliseconds. This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpStaCfgDialType is pulse. The default value of this object is 500 milliseconds." ::= { ccasGrpStaTmEntry 4 } ccasGrpABCDCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CcasGrpABCDCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The CAS group custom ABCD bits configuration table for E1. It contains A/B/C/D bits handling objects, one entry per CAS group on an E1 interface." ::= { ccasGrpABCDObjects 1 } ccasGrpABCDCfgEntry OBJECT-TYPE SYNTAX CcasGrpABCDCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the custom ABCD configuration table for each CAS Group on an E1 interface. The entry is created when a CAS group is configured on a E1. The entry is deleted when the CAS Group is de-configured from E1." INDEX { ifIndex, ccasGrpCfgIndex } ::= { ccasGrpABCDCfgTable 1 } CcasGrpABCDCfgEntry ::= SEQUENCE { ccasGrpABCDCfgInvertBits OCTET STRING, ccasGrpABCDCfgUnusedBits OCTET STRING } ccasGrpABCDCfgInvertBits OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) -- BITS are: -- dBit(0) -- cBit(1) -- bBit(2) -- aBit(3) ACCESS read-write STATUS mandatory DESCRIPTION "Specify the A/B/C/D bit mask to invert the A/B/C/D bits value before the A/B/C/D bits are sent or after the A/B/C/D bits are received. 1-bit - enable bit inversion. 0-bit - disable bit inversion. The default value of this object is '00'H." ::= { ccasGrpABCDCfgEntry 1 } ccasGrpABCDCfgUnusedBits OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) -- BITS are: -- dBit(0) -- cBit(1) -- bBit(2) -- aBit(3) ACCESS read-write STATUS mandatory DESCRIPTION "Specify the Unused A/B/C/D bit values to transmit. If any A/B/C/D bit is unused, the bit values in this object will be used to transmit for the unused A/B/C/D bits. The default value of this object is '00'H " ::= { ccasGrpABCDCfgEntry 2 } ccasChannelCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CcasChannelCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The CAS channel Standard Configuration Table. It contains the standard configuration information of CAS channel of T1/E1." ::= { ccasChannelObjects 1 } ccasChannelCfgEntry OBJECT-TYPE SYNTAX CcasChannelCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the configuration table for each CAS channel. The entry is created when a CAS channel is configured on a T1/E1 via configuration command. The entry is deleted when the CAS channel is de-configured from T1/E1." INDEX { ifIndex } ::= { ccasChannelCfgTable 1 } CcasChannelCfgEntry ::= SEQUENCE { ccasChannelCfgDS1IfIndex InterfaceIndex, ccasChannelCfgGroup INTEGER, ccasChannelCfgTimeSlot INTEGER, ccasChannelCfgBusyOut TruthValue } ccasChannelCfgDS1IfIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "the ifIndex of this CAS channel associated T1/E1. " ::= { ccasChannelCfgEntry 1 } ccasChannelCfgGroup OBJECT-TYPE SYNTAX INTEGER(0..30) ACCESS read-only STATUS mandatory DESCRIPTION "The CAS channel associated CAS group number." ::= { ccasChannelCfgEntry 2 } ccasChannelCfgTimeSlot OBJECT-TYPE SYNTAX INTEGER(1..31) ACCESS read-only STATUS mandatory DESCRIPTION "The CAS channel associated T1/E1 timeslot." ::= { ccasChannelCfgEntry 3 } ccasChannelCfgBusyOut OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The CAS channel busyout configuration. true - the CAS channel is busied out. false - the CAS is normal. The default value for this object is 'false'." ::= { ccasChannelCfgEntry 4 } ccasChannelStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF CcasChannelStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The CAS channel Status Table. It contains general information about the status of CAS channel." ::= { ccasChannelObjects 2 } ccasChannelStatusEntry OBJECT-TYPE SYNTAX CcasChannelStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the status table for each CAS channel. " INDEX { ifIndex } -- Augments ccasChannelCfgEntry ::= { ccasChannelStatusTable 1 } CcasChannelStatusEntry ::= SEQUENCE { ccasChannelStatusRecvSignalBits OCTET STRING, ccasChannelStatusBusyOut TruthValue, ccasChannelStatusInfoType INTEGER, ccasChannelStatusXmitSignalBits OCTET STRING } ccasChannelStatusRecvSignalBits OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) -- BITS are: -- dBit(0) -- cBit(1) -- bBit(2) -- aBit(3) ACCESS read-only STATUS mandatory DESCRIPTION "The receive ABCD signaling bits for the CAS channel. aBit - the signaling bit in the 6th frame bBit - the signaling bit in the 12th frame cBit - the signaling bit in the 18th frame dBit - the signaling bit in the 24th frame the cBit and dBit are only valid for E1 or T1 interface is operating in extended superframe (ESF) mode." REFERENCE "EIA/TIA-464B, chapter 6.2 Digital Signaling and Supervision" ::= { ccasChannelStatusEntry 1 } ccasChannelStatusBusyOut OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The CAS channel busyout state. true - the CAS channel is busied out. false - the CAS is normal." ::= { ccasChannelStatusEntry 2 } ccasChannelStatusInfoType OBJECT-TYPE SYNTAX INTEGER { unknown(1), speech(2), data56(3), audio31(4), audio7(5), video(6), fax(7), modem(8) } ACCESS read-only STATUS mandatory DESCRIPTION "The Information Transfer Capability for the current or last call. unknown - If since system startup there has been no call on this interface, this object has a value of unknown(1). speech - refers to a non-data connection data56 - 56k data. audio31 - audio 3.1 kHz; refers to data mode connections audio7 - audio 7 kHz; refer to data mode connections; 'Unrestricted digital information with tones/ announcements'. video - as defined in Q.931 fax - Facsimile modem - V.3x modem" REFERENCE "Q.931 [8], chapter 4.5.5, octet 3 of bearer capability information element, combined with the User Rate (as defined in octets 5 and 5a to 5d), if rate adoption is being used." ::= { ccasChannelStatusEntry 3 } ccasChannelStatusXmitSignalBits OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) -- BITS are: -- dBit(0) -- cBit(1) -- bBit(2) -- aBit(3) ACCESS read-only STATUS mandatory DESCRIPTION "The transmit ABCD signaling bits for the CAS channel. aBit - the signaling bit in the 6th frame bBit - the signaling bit in the 12th frame cBit - the signaling bit in the 18th frame dBit - the signaling bit in the 24th frame the cBit and dBit are only valid for E1 or T1 interface is operating in extended superframe (ESF) mode." REFERENCE "EIA/TIA-464B, chapter 6.2 Digital Signaling and Supervision" ::= { ccasChannelStatusEntry 4 } ccasVoiceCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CcasVoiceCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The voice specific configuration Table. It contains information about the voice related configuration parameters for a CAS group." ::= { ccasVoiceCfgObjects 1 } ccasVoiceCfgEntry OBJECT-TYPE SYNTAX CcasVoiceCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the voice specific configuration table for each CAS/DS0 group of a DS1. The entry is created if the associated CAS/DS0 group is created and the voice hardware is detected to support the voice capability for the CAS/DS0 group in the managed system. The entry is deleted when its associated CAS/DS0 group is deleted." INDEX { ifIndex, ccasGrpCfgIndex } ::= { ccasVoiceCfgTable 1 } CcasVoiceCfgEntry ::= SEQUENCE { ccasVoiceCfgNoiseRegEnable TruthValue, ccasVoiceCfgNonLinearProcEnable TruthValue, ccasVoiceCfgMusicOnHoldThreshold INTEGER, ccasVoiceCfgInGain INTEGER, ccasVoiceCfgOutAttn INTEGER, ccasVoiceCfgEchoCancelEnable TruthValue, ccasVoiceCfgEchoCancelCoverage INTEGER, ccasVoiceCfgConnectionMode INTEGER, ccasVoiceCfgConnectionNumber DisplayString, ccasVoiceCfgInitialDigitTimeOut INTEGER, ccasVoiceCfgInterDigitTimeOut INTEGER, ccasVoiceCfgRegionalTone CountryCode } ccasVoiceCfgNoiseRegEnable OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The object indicates whether or not the background noise should be played to fill silence gaps if VAD is activated. The default value of this object is 'true'." ::= { ccasVoiceCfgEntry 1 } ccasVoiceCfgNonLinearProcEnable OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The object indicates whether or not the Nonlinear Processing is enabled for the interface. The default value of this object is 'true'." ::= { ccasVoiceCfgEntry 2 } ccasVoiceCfgMusicOnHoldThreshold OBJECT-TYPE SYNTAX INTEGER(-70..-30) -- Units -- dBm ACCESS read-write STATUS mandatory DESCRIPTION "The object specifies the Music On Hold Threshold for the interface. The default value of this object is -38 dBm." ::= { ccasVoiceCfgEntry 3 } ccasVoiceCfgInGain OBJECT-TYPE SYNTAX INTEGER(-6..14) -- Units -- dB ACCESS read-write STATUS mandatory DESCRIPTION "This object contains the amount of gain inserted at the receiver side of the interface. The input gain settings only define a gain/loss relative to the 0 dB setting. The absolute loss at the 0 dB setting could be implementation dependent based on the desired network loss plan. The default value of this object is 0 dB (decibel)." ::= { ccasVoiceCfgEntry 4 } ccasVoiceCfgOutAttn OBJECT-TYPE SYNTAX INTEGER(0..14) -- Units -- dB ACCESS read-write STATUS mandatory DESCRIPTION "This object contains the amount of attenuation inserted at the transmit side of the interface. The output attenuation settings only define a loss relative to the 0 dB setting. The absolute loss at the 0 dB setting could be implementation dependent based on the desired network loss plan. The default value of this object is 0 dB (decibel)." ::= { ccasVoiceCfgEntry 5 } ccasVoiceCfgEchoCancelEnable OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The object specifies whether or not the Echo Cancellation is enabled for the interface. The default value of this object is 'true'." ::= { ccasVoiceCfgEntry 6 } ccasVoiceCfgEchoCancelCoverage OBJECT-TYPE SYNTAX INTEGER { echoCanceller8ms(1), echoCanceller16ms(2), echoCanceller24ms(3), echoCanceller32ms(4), echoCanceller64ms(5), echoCanceller128ms(6) } ACCESS read-write STATUS mandatory DESCRIPTION "The object specifies the Echo Canceller coverage for the interface. This object is valid if the ccasVoiceCfgEchoCancelEnable object is 'true'. echoCanceller8ms - 8 milliseconds echo canceller coverage. echoCanceller16ms - 16 milliseconds echo canceller coverage. echoCanceller24ms - 24 milliseconds echo canceller coverage. echoCanceller32ms - 32 milliseconds echo canceller coverage. echoCanceller64ms - 64 milliseconds echo canceller coverage. echoCanceller128ms- 128 milliseconds echo canceller coverage. The default value of this object is echoCanceller8ms." ::= { ccasVoiceCfgEntry 7 } ccasVoiceCfgConnectionMode OBJECT-TYPE SYNTAX INTEGER { normal(1), trunk(2), plar(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The object indicates the connection mode of the interface. normal - the interface acts normally to handle incoming and outgoing call. trunk - the interface acts in trunking mode. trunking mode causes two interfaces (on either the same or different routers) to be always conferenced together, and for telephony signaling to be passed transparently through the VoIP system rather than trapped and interpreted by the session application on the router(s). plar - the interface acts in PLAR (private line automatic ringdown) mode. PLAR is handled by associating a peer directly with an interface such that when the interface goes off-hook, that peer is used to setup the second call leg and conference them together without the caller having to dial any digits." ::= { ccasVoiceCfgEntry 8 } ccasVoiceCfgConnectionNumber OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "This is the E.164 phone number that is used to establish connection with trunking mode or PLAR mode. If the ccasVoiceCfgConnectionMode is 'normal', then this object will be a zero length string." ::= { ccasVoiceCfgEntry 9 } ccasVoiceCfgInitialDigitTimeOut OBJECT-TYPE SYNTAX INTEGER(0..120) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "This is the initial digit timeout that indicates the amount of time the managed system waits for an initial input digit from the caller. The timer is activated when the call is accepted and is deactivated upon digit input. If the timer expires, the caller is signaled through the appropriate tone and the call is abandoned. The value of zero disables the timer. The default value of this object is 10 seconds." ::= { ccasVoiceCfgEntry 10 } ccasVoiceCfgInterDigitTimeOut OBJECT-TYPE SYNTAX INTEGER(0..120) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "This is the inter-digit timeout that indicates the amount of time the managed system waits for a subsequent input digit from the caller. The timer is started upon receipt of an input digit and restarted as each digit is received until the destination address is identified. If the timer expires and no destination address is identified, the caller is signaled through the appropriate tone and the call is abandoned. The value of zero disables the timer. The default value of this object is 10 seconds." ::= { ccasVoiceCfgEntry 11 } ccasVoiceCfgRegionalTone OBJECT-TYPE SYNTAX CountryCode -- Rsyntax OCTET STRING(SIZE(0|2)) ACCESS read-write STATUS mandatory DESCRIPTION "This object contains the current regional setting for the call progress tone to be used by this CAS group." ::= { ccasVoiceCfgEntry 12 } ccasXgcpCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CcasXgcpCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The XGCP configuration Table contains information about DS0 usage by XGCP(SGCP/MGCP). XGCP is meant to represent both Simple Gateway Control Protocol (SGCP) and Media Gateway Control Protocol (MGCP)." ::= { ccasXgcpCfgObjects 1 } ccasXgcpCfgEntry OBJECT-TYPE SYNTAX CcasXgcpCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the configuration table for each DS0 group of a DS1. The entry is created if the DS0 group is configured as null-signaling and ccasGrpCfgServiceType is configured as either sgcp or mgcp. The entry is deleted when the signaling type is configured as non null-signaling." INDEX { ifIndex, ccasGrpCfgIndex } ::= { ccasXgcpCfgTable 1 } CcasXgcpCfgEntry ::= SEQUENCE { ccasXgcpCfgCotToneCo1 INTEGER, ccasXgcpCfgCotToneCo2 INTEGER } ccasXgcpCfgCotToneCo1 OBJECT-TYPE SYNTAX INTEGER(280..3800) -- Units -- hertz ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the continuity test tone frequencies for co1. Co1 is the COT tone frequency from the terminating switch in transponder mode and is from the originating switch in loopback mode." REFERENCE "Bellcore GR-317-CORE spec, Rev 3, Nov. 1996, section 3.1.1.3. " ::= { ccasXgcpCfgEntry 1 } ccasXgcpCfgCotToneCo2 OBJECT-TYPE SYNTAX INTEGER(280..3800) -- Units -- hertz ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the continuity test tone frequencies for co2. Co2 is the COT tone frequency from the originating switch only in transponder mode. " REFERENCE "Bellcore GR-317-CORE spec, Rev 3, Nov. 1996, section 3.1.1.3. " ::= { ccasXgcpCfgEntry 2 } ccasIfDS1Group OBJECT IDENTIFIER ::= { ccasIfMIBGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- The collection of objects providing CAS/DS0 related -- T1/E1 information. -- objects -- ccasDs1IfCfgDs0ChannelsConfigurable ccasGeneralInfoGroup OBJECT IDENTIFIER ::= { ccasIfMIBGroups 2 } -- OBJECT-GROUP -- Status -- obsolete -- Descr -- A collection of objects providing general information -- applicable to Channel Associated Signaling interfaces. -- objects -- ccasGrpCfgType, ccasGrpCfgDs0Channels, ccasGrpCfgRowStatus, -- ccasChannelCfgDS1IfIndex, ccasChannelCfgGroup, -- ccasChannelCfgTimeSlot, ccasChannelCfgBusyOut, -- ccasChannelStatusRecvSignalBits, ccasChannelStatusBusyOut, -- ccasChannelStatusInfoType, ccasChannelStatusXmitSignalBits ccasEMGroup OBJECT IDENTIFIER ::= { ccasIfMIBGroups 3 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- A collection of objects providing information applicable -- to the CAS E&M signal interfaces. -- objects -- ccasGrpEMCfgDialType, ccasGrpEMCfgDnisAni, -- ccasGrpEMTmClearWaitDuration, ccasGrpEMTmMaxWinkWaitDuration, -- ccasGrpEMTmMaxWinkDuration, ccasGrpEMTmDelayStart, -- ccasGrpEMTmMaxDelayDuration, ccasGrpEMTmMinDelayPulseWidth, -- ccasGrpEMTmDigitDuration, ccasGrpEMTmInterDigitDuration, -- ccasGrpEMTmPulseRate, ccasGrpEMTmPulseInterDigitDuration ccasLineGroup OBJECT IDENTIFIER ::= { ccasIfMIBGroups 4 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing information applicable -- to the CAS FXS/SAS signal interfaces. -- objects -- ccasGrpLineCfgNumberRings, ccasGrpLineCfgSupDisconnect, -- ccasGrpLineCfgDialType, ccasGrpLineTmDigitDuration, -- ccasGrpLineTmInterDigitDuration, ccasGrpLineTmPulseRate, -- ccasGrpLineTmPulseInterDigitDuration ccasStaGroup OBJECT IDENTIFIER ::= { ccasIfMIBGroups 5 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing information applicable -- to the CAS FXO/SAO signal interfaces. -- objects -- ccasGrpStaCfgNumberRings, ccasGrpStaCfgDialType, -- ccasGrpStaTmDigitDuration, ccasGrpStaTmInterDigitDuration, -- ccasGrpStaTmPulseRate, ccasGrpStaTmPulseInterDigitDuration ccasCustomABCDGroup OBJECT IDENTIFIER ::= { ccasIfMIBGroups 6 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing ABCD bits -- configuration information applicable to the CAS group -- on E1 interface. -- objects -- ccasGrpABCDCfgInvertBits, ccasGrpABCDCfgUnusedBits ccasVoiceGroup OBJECT IDENTIFIER ::= { ccasIfMIBGroups 7 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing information applicable -- to the CAS/DS0 group that supports voice capability. -- objects -- ccasVoiceCfgNoiseRegEnable, ccasVoiceCfgNonLinearProcEnable, -- ccasVoiceCfgMusicOnHoldThreshold, ccasVoiceCfgInGain, -- ccasVoiceCfgOutAttn, ccasVoiceCfgEchoCancelEnable, -- ccasVoiceCfgEchoCancelCoverage, ccasVoiceCfgConnectionMode, -- ccasVoiceCfgConnectionNumber, ccasVoiceCfgInitialDigitTimeOut, -- ccasVoiceCfgInterDigitTimeOut, ccasVoiceCfgRegionalTone ccasGeneralInfoGroupRev1 OBJECT IDENTIFIER ::= { ccasIfMIBGroups 8 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing general information -- applicable to CAS/DS0 interfaces. -- objects -- ccasGrpCfgType, ccasGrpCfgDs0Channels, ccasGrpCfgServiceType, -- ccasGrpCfgRowStatus ccasChannelInfoGroup OBJECT IDENTIFIER ::= { ccasIfMIBGroups 9 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing channel signaling -- information applicable to Channel Associated Signaling -- interfaces. -- objects -- ccasChannelCfgDS1IfIndex, ccasChannelCfgGroup, -- ccasChannelCfgTimeSlot, ccasChannelCfgBusyOut, -- ccasChannelStatusRecvSignalBits, ccasChannelStatusBusyOut, -- ccasChannelStatusInfoType, ccasChannelStatusXmitSignalBits ccasXgcpCfgGroup OBJECT IDENTIFIER ::= { ccasIfMIBGroups 10 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing XGCP specific -- information applicable to DS0. -- objects -- ccasXgcpCfgCotToneCo1, ccasXgcpCfgCotToneCo2 ccasEMGroupRev1 OBJECT IDENTIFIER ::= { ccasIfMIBGroups 11 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- A collection of objects providing information -- applicable to the CAS E&M signal interfaces. -- objects -- ccasGrpEMCfgDialType, ccasGrpEMCfgDnisAni, -- ccasGrpEMTmClearWaitDuration, ccasGrpEMTmMaxWinkWaitDuration, -- ccasGrpEMTmMaxWinkDuration, ccasGrpEMTmDelayStart, -- ccasGrpEMTmMaxDelayDuration, ccasGrpEMTmMinDelayPulseWidth, -- ccasGrpEMTmDigitDuration, ccasGrpEMTmInterDigitDuration, -- ccasGrpEMTmPulseRate, ccasGrpEMTmPulseInterDigitDuration, -- ccasGrpEMCfgLmrMCap, ccasGrpEMCfgLmrECap, -- ccasGrpEMTmVoiceHangover, ccasGrpEMTmLmrTeardown ccasEMGroupRev2 OBJECT IDENTIFIER ::= { ccasIfMIBGroups 12 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing information -- applicable to the CAS E&M signal interfaces. -- objects -- ccasGrpEMCfgDialType, ccasGrpEMCfgDnisAni, -- ccasGrpEMTmClearWaitDuration, ccasGrpEMTmMaxWinkWaitDuration, -- ccasGrpEMTmMaxWinkDuration, ccasGrpEMTmDelayStart, -- ccasGrpEMTmMaxDelayDuration, ccasGrpEMTmMinDelayPulseWidth, -- ccasGrpEMTmDigitDuration, ccasGrpEMTmInterDigitDuration, -- ccasGrpEMTmPulseRate, ccasGrpEMTmPulseInterDigitDuration, -- ccasGrpEMCfgLmrMCap, ccasGrpEMCfgLmrECap, -- ccasGrpEMTmVoiceHangover, ccasGrpEMTmLmrTeardown, -- ccasGrpEMCfgAutoGainControl, ccasGrpEMTmPttXmt, -- ccasGrpEMTmPttRcv, ccasGrpEMTmDelayVoice ccasIfMIBCompliance OBJECT IDENTIFIER ::= { ccasIfMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- obsolete -- Descr -- The compliance statement for entities which implement -- the Cisco Voice Digital interface MIB -- Module -- >>current<< -- MandGroup -- ccasIfDS1Group -- MandGroup -- ccasGeneralInfoGroup -- OptGroup -- ccasEMGroup -- OptGroup -- ccasLineGroup -- OptGroup -- ccasStaGroup -- OptGroup -- ccasCustomABCDGroup -- OptGroup -- ccasVoiceGroup -- ObjVar -- ccasGrpCfgType -- ObjVar -- ccasGrpCfgDs0Channels -- ObjVar -- ccasGrpCfgRowStatus -- ObjVar -- ccasGrpEMCfgDialType -- ObjVar -- ccasGrpEMCfgDnisAni -- ObjVar -- ccasGrpABCDCfgInvertBits -- ObjVar -- ccasGrpABCDCfgUnusedBits -- ObjVar -- ccasVoiceCfgNoiseRegEnable -- ObjVar -- ccasVoiceCfgNonLinearProcEnable -- ObjVar -- ccasVoiceCfgMusicOnHoldThreshold -- ObjVar -- ccasVoiceCfgInGain -- ObjVar -- ccasVoiceCfgOutAttn -- ObjVar -- ccasVoiceCfgEchoCancelEnable -- ObjVar -- ccasVoiceCfgEchoCancelCoverage -- ObjVar -- ccasVoiceCfgConnectionMode -- ObjVar -- ccasVoiceCfgConnectionNumber -- ObjVar -- ccasVoiceCfgInitialDigitTimeOut -- ObjVar -- ccasVoiceCfgInterDigitTimeOut -- ObjVar -- ccasVoiceCfgRegionalTone ccasIfMIBComplianceRev1 OBJECT IDENTIFIER ::= { ccasIfMIBCompliances 2 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The compliance statement for entities which implement -- the Cisco Voice Digital interface MIB -- Module -- >>current<< -- MandGroup -- ccasIfDS1Group -- MandGroup -- ccasGeneralInfoGroupRev1 -- OptGroup -- ccasEMGroupRev1 -- OptGroup -- ccasLineGroup -- OptGroup -- ccasStaGroup -- OptGroup -- ccasCustomABCDGroup -- OptGroup -- ccasVoiceGroup -- OptGroup -- ccasChannelInfoGroup -- OptGroup -- ccasXgcpCfgGroup -- ObjVar -- ccasGrpCfgType -- ObjVar -- ccasGrpCfgDs0Channels -- ObjVar -- ccasGrpCfgRowStatus -- ObjVar -- ccasGrpEMCfgDialType -- ObjVar -- ccasGrpEMCfgDnisAni -- ObjVar -- ccasGrpABCDCfgInvertBits -- ObjVar -- ccasGrpABCDCfgUnusedBits ccasIfMIBComplianceRev2 OBJECT IDENTIFIER ::= { ccasIfMIBCompliances 3 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The compliance statement for entities which implement -- the Cisco Voice Digital interface MIB -- Module -- >>current<< -- MandGroup -- ccasIfDS1Group -- MandGroup -- ccasGeneralInfoGroupRev1 -- OptGroup -- ccasEMGroupRev1 -- OptGroup -- ccasLineGroup -- OptGroup -- ccasStaGroup -- OptGroup -- ccasCustomABCDGroup -- OptGroup -- ccasVoiceGroup -- OptGroup -- ccasChannelInfoGroup -- OptGroup -- ccasXgcpCfgGroup -- ObjVar -- ccasGrpCfgType -- ObjVar -- ccasGrpCfgDs0Channels -- ObjVar -- ccasGrpCfgRowStatus -- ObjVar -- ccasGrpEMCfgDialType -- ObjVar -- ccasGrpEMCfgDnisAni -- ObjVar -- ccasGrpABCDCfgInvertBits -- ObjVar -- ccasGrpABCDCfgUnusedBits ccasIfMIBComplianceRev3 OBJECT IDENTIFIER ::= { ccasIfMIBCompliances 4 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for entities which implement -- the Cisco Voice Digital interface MIB -- Module -- >>current<< -- MandGroup -- ccasIfDS1Group -- MandGroup -- ccasGeneralInfoGroupRev1 -- OptGroup -- ccasEMGroupRev2 -- OptGroup -- ccasLineGroup -- OptGroup -- ccasStaGroup -- OptGroup -- ccasCustomABCDGroup -- OptGroup -- ccasVoiceGroup -- OptGroup -- ccasChannelInfoGroup -- OptGroup -- ccasXgcpCfgGroup -- ObjVar -- ccasGrpCfgType -- ObjVar -- ccasGrpCfgDs0Channels -- ObjVar -- ccasGrpCfgRowStatus -- ObjVar -- ccasGrpEMCfgDialType -- ObjVar -- ccasGrpEMCfgDnisAni -- ObjVar -- ccasGrpABCDCfgInvertBits -- ObjVar -- ccasGrpABCDCfgUnusedBits -- ObjVar -- ccasGrpEMCfgLmrMCap -- ObjVar -- ccasGrpEMCfgLmrECap -- ObjVar -- ccasGrpEMCfgAutoGainControl END