-- MIB created 4/23/97 15:38:17, by
--   SMIC (the next generation) version 1.6.29, November 22, 1994.

CISCO-COMPRESSION-SERVICE-ADAPTER-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-COMPRESSION-SERVICE-ADAPTER-MIB.my"

IMPORTS
    Counter32, Gauge32
            FROM SNMPv2-SMI-v1
    OBJECT-TYPE
            FROM RFC-1212
    TruthValue
            FROM SNMPv2-TC-v1
    ciscoMgmt
            FROM CISCO-SMI
    cardIndex
            FROM OLD-CISCO-CHASSIS-MIB;

ciscoCompressionServiceAdapterMIB OBJECT IDENTIFIER ::= { ciscoMgmt 57 }
-- MODULE-IDENTITY
--  LastUpdated
--    9608150000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--     Cisco Systems
--    Customer Service
--    
--    Postal: 170 West Tasman Drive
--    San Jose, CA  95134
--    USA
--    
--    Tel: +1 800 553-NETS
--    
--    E-mail: cs-snmp@cisco.com
--  Descr
--    Used to manage the compression service adapter.

ciscoCSAMIBObjects OBJECT IDENTIFIER ::= { ciscoCompressionServiceAdapterMIB 1 }
csaStats        OBJECT IDENTIFIER ::= { ciscoCSAMIBObjects 1 }
ciscoCSAMIBConformance OBJECT IDENTIFIER ::= { ciscoCompressionServiceAdapterMIB 3 }
csaMIBCompliances OBJECT IDENTIFIER ::= { ciscoCSAMIBConformance 1 }
csaMIBGroups    OBJECT IDENTIFIER ::= { ciscoCSAMIBConformance 2 }

csaStatsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CsaStatsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A table describing performance statistics and status of 
        compression service adapter."
    ::= { csaStats 1 }

csaStatsEntry OBJECT-TYPE
    SYNTAX CsaStatsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry in this table describes performance statistics 
         for a compression service. A new entry is created or removed
         when compression service adapter is physically added or 
         removed from the device.
         Each entry is indexed by cardIndex object, which is an
         index for cardTable in chassis mib. Every card of type
         sa-compression in cardTable will have corresponding entry
         in csaStatsTable."
    INDEX { cardIndex }
    ::= { csaStatsTable 1 }

CsaStatsEntry ::= SEQUENCE {
    csaInOctets Counter32,
    csaOutOctets Counter32,
    csaInPackets Counter32,
    csaOutPackets Counter32,
    csaInPacketsDrop Counter32,
    csaOutPacketsDrop Counter32,
    csaNumberOfRestarts Counter32,
    csaCompressionRatio Gauge32,
    csaDecompressionRatio Gauge32,
    csaEnable TruthValue
    }

csaInOctets OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of compressed octets received by the compression
        service adaptor."
    ::= { csaStatsEntry 1 }

csaOutOctets OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of compressed octets sent by the compression
        service adaptor."
    ::= { csaStatsEntry 2 }

csaInPackets OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of compressed packets received by the compression
        service adaptor."
    ::= { csaStatsEntry 3 }

csaOutPackets OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of compressed packets sent by the compression
        service adaptor."
    ::= { csaStatsEntry 4 }

csaInPacketsDrop OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of output packets dropped.
                       A large number of packets dropped by a compression adaptor
                       would indicate, amount of data being passed to the adaptor
                       for processing, exceeds its capacity."
    ::= { csaStatsEntry 5 }

csaOutPacketsDrop OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of input packets dropped.
                       A large number of packets dropped by a compression adaptor
                       would indicate, amount of data being passed to the adaptor
                       for processing, exceeds its capacity."
    ::= { csaStatsEntry 6 }

csaNumberOfRestarts OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of compression session restarts. A large number of 
        restarts could indicate incompatible remote router, data being
        corrupted in transmission or packet order not being 
        maintained."
    ::= { csaStatsEntry 7 }

csaCompressionRatio OBJECT-TYPE
    SYNTAX Gauge32(0..100)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Current Compression ratio, the percentage the data was 
        compressed.  This is an instantaneous value. 
        Compression ratio of 0% would indicate no 
        compression, a compression ratio of 90% could mean 100 
        octets were compressed into 10 octets."
    ::= { csaStatsEntry 8 }

csaDecompressionRatio OBJECT-TYPE
    SYNTAX Gauge32(0..100)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Current decompression ratio, the percentage the data was 
        decompressed.  This is an instantaneous value. 
        Decompression ratio of 0% would indicate no decompression, 
        a decompression ratio of 90% could mean 10 octets were 
        decompressed into 100 octets."
    ::= { csaStatsEntry 9 }

csaEnable OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Indicates whether compression service adapter is currently
         active.  Also allows users to set status via SNMP."
    ::= { csaStatsEntry 10 }

csaMIBGroup OBJECT IDENTIFIER ::= { csaMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects providing information about 
--    Cisco compression service adapter.
--  objects
--    csaInOctets, csaOutOctets, csaInPackets, csaOutPackets, 
--    csaInPacketsDrop, csaOutPacketsDrop, csaNumberOfRestarts, 
--    csaCompressionRatio, csaDecompressionRatio, csaEnable

csaMIBCompliance OBJECT IDENTIFIER ::= { csaMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The Cisco Compression Service Adapter MIB is required in all 
--    systems supporting such an adaptor.
--  Module
--    >>current<<
--   MandGroup
--    csaMIBGroup


END