-- MIB file created 25-Apr-2007 10:41:53, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com CISCO-DOT11-ASSOCIATION-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-DOT11-ASSOCIATION-MIB.my" -- Compile options "4 7 F H N O W 03 06 0B 0G 0N 0T" IMPORTS MacAddress, TruthValue FROM SNMPv2-TC-v1 ifIndex, InterfaceIndex FROM IF-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB cd11IfAuxSsid, CDot11IfVlanIdOrZero, CDot11IfCipherType FROM CISCO-DOT11-IF-MIB ciscoMgmt FROM CISCO-SMI Counter, Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; ciscoDot11AssociationMIB OBJECT IDENTIFIER ::= { ciscoMgmt 273 } -- MODULE-IDENTITY -- LastUpdated -- 200701050000Z -- OrgName -- Cisco Systems Inc. -- ContactInfo -- Cisco Systems -- Customer Service -- -- Postal: 170 West Tasman Drive, -- San Jose CA 95134-1706. -- USA -- -- Tel: +1 800 553-NETS -- -- E-mail: cs-dot11@cisco.com -- Descr -- This MIB module provides network management -- information on IEEE 802.11 wireless device -- association management and data packet forwarding -- configuration and statistics. This MIB is an -- extension to the IEEE802dot11-MIB and provides -- per client based information. -- -- The IEEE802dot11-MIB is defined in the IEEE Std -- 802.11-Jan 14 1999, Wireless LAN Medium Access -- Control and Physical Layer Specifications, by the -- LAN MAN Standards Committee of the IEEE Computer -- Society. -- -- -- GLOSSARY and ACRONYMS -- -- -- Access point (AP) -- Transmitter/receiver (transceiver) device -- that commonly connects and transports data -- between a wireless network and a wired network. -- -- AES -- Advanced Encryption Standard -- -- Association -- The service used to establish access point -- or station mapping and enable STA invocation -- of the distribution system serivces. -- (Wireless clients attempt to connect to -- access points.) -- -- Bridge -- Device that connects two or more segments -- and reduces traffic by analyzing the -- destination address, filtering the frame, -- and forwarding the frame to all connected -- segments. -- -- Bridge AP -- It is an AP that functions as a transparent -- bridge between 2 wired LAN segments. -- -- Bridge Host -- This is also known as Work Group Bridge. This -- is a non-root bridge that is connected to a -- remote LAN segment and will only communicate -- with repeaters or root bridges. It does not -- accept association from other wireless devices. -- -- BSS -- IEEE 802.11 Basic Service Set (Radio Cell). The -- BSS of an AP comprises of the stations directly -- associated with the AP. -- -- CCX -- Cisco Compatible eXtensions -- -- A set of specifications which when implemented -- would make a client radio interoperable with a -- Cisco WLAN infrastructure and make best use of the -- innovations for enhanced security, mobility, -- quality of service and network management. -- -- CCMP -- Code Mode/CBC Mac Protocol -- -- Client (Client Station) -- A wireless device in a wireless network -- associated with an access point. -- -- Direct Sequence Spread Sprectrum ( DSSS ) -- -- DSSS is a method to send data where the -- transmitting and receiving systems operate at -- frequencies as wide as 22MHz. The wide channels -- help the participating systems to send more -- information at higher data rates than the FSSS -- systems. -- -- EAP -- Extensible Authentication Protocol -- -- EAP-TLS -- Extensible Authentication Protocol-Transport -- Layer Security -- -- Frequency Hopping Spread Spectrum ( FSSS ) -- -- FSSS systems hop from one frequency to another in -- the allowed band of frequencies during the data -- transmission. 83 MHz is specified as the allowed -- band of frequencies in the 2.4 GHz spectrum. -- -- IEEE 802.11 -- Standard to encourage interoperability among -- wireless networking equipment. -- -- IEEE 802.11b -- -- The IEEE 802.11b standard describes DSSS systems -- that operate in the 2.4 GHz ISM band at data -- rates of 1, 2, 5,5 and 11 Mbps. -- -- IEEE 802.11a -- -- The IEEE 802.11a standard describes wireless LAN -- operation in the 5 GHz UNII band at data rates -- of 6, 9, 12, 18, 24, 36, 48 and 54 Mbps. -- -- IEEE 802.11g -- -- This standard specifies operation in 2.4 GHz ISM -- band at data rates of 6, 9, 12, 18. 24, 36, 48 and -- 54 Mbps. -- -- Industrial, Scientific and Medical band (ISM) -- -- A license-free band specified by the Federal -- Communications Commission for use by the wireless -- LAN systems. The ISM bands are located starting -- at 902 MHz, 2.4GHz and 5.8 GHz. -- -- MIC -- Message Integrity Check. A MIC can, optionally, -- be added to WEP-encrypted 802.11 frames. -- -- Non-Root Bridge -- This wireless bridge does not connect to the main -- wired LAN segment. It connects to a remote wired -- LAN segment and can associate to root bridges and -- other non-root bridges that accept client -- associations. It also can accept associations -- from other non-root bridges, repeater access -- points, and client devices. -- -- PCI -- Peripheral Component Interconnect -- -- A local bus standard developed by Intel -- Corporation. Most modern PCs include a PCI bus. -- PCI is a 64-bit bus, though it is usually -- implemented as a 32-bit bus. It can run at clock -- speeds of 33 or 66 MHz. At 32 bits and 33 MHz, it -- yields a throughput rate of 133 MBps. -- -- Repeater -- Device that connects multiple segments, listening -- to each and repeating signal on one to every other -- connected one; regenerates each transmission -- so that it can travel farther. -- -- Repeater or Non-root Access Point -- The repeater access point is not connected -- to the wired LAN. The Repeater is a wireless -- LAN transceiver that transfers data between -- a client and another access point, another -- repeater, or between two bridges. The repeater -- is placed within radio range of an access point -- connected to the wired LAN, another repeater, or -- an non-root bridge to extend the range of the -- infrastructure. -- -- Root Access Point -- This access point connects clients to the main -- wired LAN. -- -- Root Wireless Bridge -- This wireless bridge is connected to the main -- wired LAN. This wireless bridge can communicate -- with non-root wireless bridges, repeater access -- points, and client devices but not with another -- wireless root bridge. Only one wireless bridge -- in a wireless LAN can be set as the wireless -- root bridge. -- -- SSID -- Radio Service Set ID. It is used for identification -- during association. -- -- STA (WSTA) -- A non-AP 802.11 wireless station. -- -- TKIP -- WPA Temporal Key encryption. -- -- Unlicensed National Information Infrastucture (UNII) -- -- The UNII bands are in the 5 GHz range and are 100 -- MHz wide. These bands are used by 802.11a-compliant -- devices. -- -- WEP -- Wired Equivalent Privacy. 'WEP' is generally used -- to refer to 802.11 encryption. -- -- WPA -- WiFi Protected Access -- -- Work Group Bridges (WGB) -- See bridge host. -- RevDate -- 200701050000Z -- RevDescr -- The changes made are as follows. -- -- - Added more explanations on the kind of entries -- populated for cDot11ClientConfigInfoTable, on -- infrastructure clients like repeaters, non-root -- bridges and workgroup bridges. -- -- - Added cDot11ClientNewKeyManagement object -- to the cDot11ClientConfigInfoTable. -- RevDate -- 200606120000Z -- RevDescr -- The changes made are as follows. -- -- - Added the following enumerations to -- CDot11ClientRadioType. -- -- - 'cb21ag' -- - 'ccxClient' -- - 'unknown' -- -- - Added 'unknown' to CDot11ClientDevType. -- -- - Added cDot11ClientDevObjectID to -- cDot11ClientConfigInfoTable. -- RevDate -- 200503080000Z -- RevDescr -- Updated CDot11ClientDevType to include a new device -- type. Updated CDot11ClientRadioType to include new -- radio types. -- RevDate -- 200411280000Z -- RevDescr -- Correct spelling of CDot11AuthenicationMethod to -- CDot11AuthenticationMethod. -- RevDate -- 200410180000Z -- RevDescr -- Added new client VLAN, sub-interface ifIndex, key -- management type, authentication type, and cipher -- type information. -- RevDate -- 200402190000Z -- RevDescr -- Added new cd11IfCipherStatsTable for radio interface -- AES, TKIP, and security tempering attempts statistics. -- RevDate -- 200307270000Z -- RevDescr -- Added new IEEE 802.11g radio type to -- CDot11ClientRadioType and new AP device type to -- CDot11ClientDevType. -- RevDate -- 200304110000Z -- RevDescr -- Added new objects for client software version, IP -- address, name, and association or authentication state. -- RevDate -- 200301290000Z -- RevDescr -- Added new 5GHz radio type to CDot11ClientRadioType -- and new client types to CDot11ClientDevType. -- RevDate -- 200207150000Z -- RevDescr -- Corrected the unit of cDot11ClientBytesReceived. -- RevDate -- 200204170000Z -- RevDescr -- Added a new index cd11IfAuxSsid and a new object -- cDot11ClientParentAddress to the -- cDot11ClientConfigInfoTable. -- RevDate -- 200203060000Z -- RevDescr -- Initial version of this MIB module. ciscoDot11AssocMIBObjects OBJECT IDENTIFIER ::= { ciscoDot11AssociationMIB 1 } cDot11AssociationGlobal OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBObjects 1 } cDot11ClientConfiguration OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBObjects 2 } cDot11ClientStatistics OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBObjects 3 } ciscoDot11AssocMIBConformance OBJECT IDENTIFIER ::= { ciscoDot11AssociationMIB 2 } ciscoDot11AssocMIBCompliances OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBConformance 1 } ciscoDot11AssocMIBGroups OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBConformance 2 } CDot11ClientRoleClassType ::= INTEGER { --?? enum value of zero may cause problems clientStation(0), repeater(1), accessPoint(2), bridgeHost(3), bridge(4), bridgeRoot(5), ethernetClient(6) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- This defines the type of role of a wireless device. -- The device types are: -- clientStation(0) - client station, -- repeater(1) - repeater access point, -- accessPoint(2) - access point, -- bridgeHost(3) - bridge host (WGB), -- bridge(4) - bridge, -- bridgeRoot(5) - root bridge -- ethernetClient(6) - Ethernet client through WGB. CDot11ClientDevType ::= INTEGER { unknown(1), ethernetAP(76), ethernetBridge(77), pc3000Client(84), serialUC(85), ethernetUC(86), pc3500Client(101), pc4500Client(102), generic80211Client(104), pc4800Client(109), pc3100Client(110), mc(111), ethernetClient(112), pc4800bClient(117), wgbNoDiversity(123), wgb(124), series350Client(127), series370Client(128), c1100SeriesAP(129), c1410SeriesBridge(130), c1200SeriesAP(132), mp2xClient(133), c350SeriesAP(134), cb21agClient(135), radioKodiak(136), c1130SeriesAP(137), c1310SeriesBridge(138), c7920phone(139), c1240SeriesAP(140) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- This defines the classifications of wireless client -- device. The devices are classified by their Ethernet -- connection, serial connection, and the type of radio -- it uses. The device classifications are: -- unknown(1) - unknown, -- ethernetAP(76) - Ethernet access point, -- ethernetBridge(77) - Ethernet bridge, -- pc3000Client(84) - client with a 3000 radio, -- serialUC(85) - serial port universal -- client, -- ethernetUC(86) - Ethernet universal -- client, -- pc3500Client(101) - client with a 5300 radio, -- pc4500Client(102) - client with a 4500 radio, -- generic80211Client(104) - client of an unknown -- radio type and non-Cisco -- device, -- pc4800Client(109) - client with a 4800 radio, -- pc3100Client(110) - client with a 3100 radio, -- mc(111) - multiple client Ethernet, -- universal client, -- ethernetClient(112) - Ethernet client of a WGB, -- pc4800bClient(117) - client with a 4800b radio, -- wgbNoDiversity(123) - WGB with one antenna, -- wgb(124) - WGB with two antennas, -- series350Client(127) - client with 350 series -- radio, -- series370Client(128) - client with 370 series -- dot11A radio, -- c1100SeriesAP(129) - Cisco 1100 series AP, -- c1410SeriesBridge(130) - Cisco 1410 series bridge, -- c1200SeriesAP(132) - Cisco 1200 series AP, -- mp2xClient(133) - client with MP2x IEEE -- 802.11g radio, -- c350SeriesAP(134) - Cisco IOS 350 series AP, -- cb21agClient(135) - Cisco CB21AG/PI21AG -- IEEE 802.lla/b/g client, -- radioKodiak(136) - Cisco IEEE 802.11a -- AIR-RM21A-x-K9 and -- AIR-RM22A-x-K9 radio, -- c1130SeriesAP(137) - Cisco 1130 series AP, -- c1310SeriesBridge(138) - Cisco 1310 series bridge, -- c7920phone(139) - Cisco 7920 series phone, -- c1240SeriesAP(140) - Cisco 1240 series AP. CDot11ClientRadioType ::= INTEGER { unknown(1), ccxClient(2), pc3500(3), pc3000(4), pc4500(6), pc4800(12), pc3100(13), series340(33), series350(34), series370(35), bridge1410(36), mp2xSeries(37), rm2xSeries(38), rm2gSeries(39), mp2xMAR(40), cb21ag(46) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- This defines the radio classifications of wireless -- stations. It indicates the model number of the radio -- in the remote unit. The radio classifications are: -- unknown(1) - unknown, -- ccxClient(2) - CCX-compatible radio, -- pc3500(3) - Cisco 3500 radio, -- pc3000(4) - Cisco 3000 radio, -- pc4500(6) - Cisco 4500 radio, -- pc4800(12) - Cisco 4800 radio, -- pc3100(13) - Cisco 3100 radio, -- series340(33) - Cisco 340 series radio, -- series350(34) - Cisco 350 series radio, -- series370(35) - Cisco 370 series dot11A radio, -- bridge1410(36) - Cisco 1410 bridge 5GHz radio, -- mp2xSeries(37) - Cisco 11g MP2x series radio, -- rm2xSeries(38) - Cisco 11a RM2x series radio, -- rm2gSeries(39) - Cisco 11g RM2x series radio, -- mp2xMAR(40) - Cisco 3210 MAR 11g MP2x radio, -- cb21ag(46) - Cisco CB21AG/PI21AG -- IEEE 802.11a/b/g radio. CDot11AuthenticationMethod ::= INTEGER { open(1), sharedKey(2), networkEap(129) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- These are the IEEE 802.11 supported -- authentication methods for wireless devices: -- open(1) - Open System -- sharedKey(2) - Shared Key -- networkEap(129) - Network EAP. -- Refer -- IEEE Std 802.11-Jan 14 1999, Wireless LAN Medium -- Access Control and Physical Layer Specifications, -- LAN MAN Standards Committee of the IEEE Computer -- Society, IEEE802dot11-MIB, -- dot11AuthenticationAlgorithm. CDot11AdditionalAuthenMethod ::= OCTET STRING(SIZE(1..2)) -- BITS are: -- mac(0) -- eap(1) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- These are the additional authentications that can -- be performed after IEEE 802.11 Open System or Shared -- Key authentication is completed successfully: -- mac(0) - MAC address authentication -- eap(1) - EAP authentication. CDot11Dot1xAuthenMethod ::= OCTET STRING(SIZE(1..2)) -- BITS are: -- md5(0) -- leap(1) -- peap(2) -- eapTls(3) -- eapSim(4) -- eapFast(5) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- These are the IEEE 802.1x authentication methods -- performed between the IEEE 802.11 wireless clients -- and the authentication server. Depending on the -- server and client configuration, more than one -- authentication methods can be performed for any -- IEEE 802.11 association. The IEEE 802.1x -- authentication methods are: -- md5(0) - Message-digest algorithm -- leap(1) - Cisco Light-weight EAP -- peap(2) - Protected EAP -- eapTls(3) - EAP Transport Layer Security -- eapSim(4) - EAP Enhanced GSM Authentication -- eapFast(5) - Cisco EAP Fast. CDot11KeyManagementMethod ::= OCTET STRING(SIZE(1..2)) -- BITS are: -- wpa(0) -- cckm(1) -- TEXTUAL-CONVENTION -- Status -- deprecated -- Descr -- These are the encryption key management methods -- for IEEE 802.11 wireless frame encryption. The key -- management methods are: -- wpa(0) - Wi-Fi Protected Access -- cckm(1) - Cisco proprietary key management. CDot11NewKeyManagementMethod ::= OCTET STRING(SIZE(1..2)) -- BITS are: -- cckm(0) -- wpa1(1) -- wpa2(2) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- These are the encryption key management methods -- for IEEE 802.11 wireless frame encryption. The key -- management methods are: -- cckm(0) - Cisco proprietary key management -- wpa1(1) - Wi-Fi Protected Access version 1 -- wpa2(2) - Wi-Fi Protected Access version 2. cDot11ParentAddress OBJECT-TYPE SYNTAX MacAddress -- Rsyntax OCTET STRING(SIZE(6)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the MAC address of the parent access point or root bridge for this device. The value is zero if this is a root access point or bridge." ::= { cDot11AssociationGlobal 1 } cDot11ActiveDevicesTable OBJECT-TYPE SYNTAX SEQUENCE OF CDot11ActiveDevicesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the list of active devices currently associated with this device on each of the IEEE 802.11 interfaces. This table has a sparse dependent relationship on the ifTable." ::= { cDot11AssociationGlobal 2 } cDot11ActiveDevicesEntry OBJECT-TYPE SYNTAX CDot11ActiveDevicesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry represents a currently active device associated with this device. These active devices include: wireless clients, repeaters, and bridges." INDEX { ifIndex } ::= { cDot11ActiveDevicesTable 1 } CDot11ActiveDevicesEntry ::= SEQUENCE { cDot11ActiveWirelessClients Gauge, cDot11ActiveBridges Gauge, cDot11ActiveRepeaters Gauge } cDot11ActiveWirelessClients OBJECT-TYPE SYNTAX Gauge(0..2007) -- Units -- Device ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of wireless clients currently associating with this device on this interface." ::= { cDot11ActiveDevicesEntry 1 } cDot11ActiveBridges OBJECT-TYPE SYNTAX Gauge(0..2007) -- Units -- Device ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of bridges currently associating with this device on this interface." ::= { cDot11ActiveDevicesEntry 2 } cDot11ActiveRepeaters OBJECT-TYPE SYNTAX Gauge(0..2007) -- Units -- Device ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of repeaters currently associating with this device on this interface." ::= { cDot11ActiveDevicesEntry 3 } cDot11AssociationStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CDot11AssociationStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains statistics for various devices associated with this device on each of the IEEE 802.11 interfaces since it was last re-started. These devices include: wireless clients, repeaters, and bridges. This table has a sparse dependent relationship on the ifTable." ::= { cDot11AssociationGlobal 3 } cDot11AssociationStatsEntry OBJECT-TYPE SYNTAX CDot11AssociationStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry provides association statistics of various devices interacting with this device on each of the IEEE 802.11 interfaces." INDEX { ifIndex } ::= { cDot11AssociationStatsTable 1 } CDot11AssociationStatsEntry ::= SEQUENCE { cDot11AssStatsAssociated Counter, cDot11AssStatsAuthenticated Counter, cDot11AssStatsRoamedIn Counter, cDot11AssStatsRoamedAway Counter, cDot11AssStatsDeauthenticated Counter, cDot11AssStatsDisassociated Counter } cDot11AssStatsAssociated OBJECT-TYPE SYNTAX Counter -- Units -- client ACCESS read-only STATUS mandatory DESCRIPTION "This object counts the number of stations associated with this device on this interface since device re-started." ::= { cDot11AssociationStatsEntry 1 } cDot11AssStatsAuthenticated OBJECT-TYPE SYNTAX Counter -- Units -- client ACCESS read-only STATUS mandatory DESCRIPTION "This object counts the number of stations authenticated with this device on this interface since device re-started." ::= { cDot11AssociationStatsEntry 2 } cDot11AssStatsRoamedIn OBJECT-TYPE SYNTAX Counter -- Units -- client ACCESS read-only STATUS mandatory DESCRIPTION "This object counts the number of stations roamed from another device to this device on this interface since device re-started." ::= { cDot11AssociationStatsEntry 3 } cDot11AssStatsRoamedAway OBJECT-TYPE SYNTAX Counter -- Units -- client ACCESS read-only STATUS mandatory DESCRIPTION "This object counts the number of stations roamed away from this device on this interface since device re-started." ::= { cDot11AssociationStatsEntry 4 } cDot11AssStatsDeauthenticated OBJECT-TYPE SYNTAX Counter -- Units -- client ACCESS read-only STATUS mandatory DESCRIPTION "This object counts the number of stations deauthenticated with this device on this interface since device re-started." ::= { cDot11AssociationStatsEntry 5 } cDot11AssStatsDisassociated OBJECT-TYPE SYNTAX Counter -- Units -- client ACCESS read-only STATUS mandatory DESCRIPTION "This object counts the number of stations disassociated with this device on this interface since device re-started." ::= { cDot11AssociationStatsEntry 6 } cd11IfCipherStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF Cd11IfCipherStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table includes AES, TKIP, and security tempering attempts statistics collected by the IEEE 802.11 radio interfaces and system management. This table has a sparse dependent relationship on the ifTable. For each entry in this table, there exists an entry in the ifTable of ifType ieee80211(71)." ::= { cDot11AssociationGlobal 4 } cd11IfCipherStatsEntry OBJECT-TYPE SYNTAX Cd11IfCipherStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry provides cipher related statistics collected on each of the IEEE 802.11 interfaces." INDEX { ifIndex } ::= { cd11IfCipherStatsTable 1 } Cd11IfCipherStatsEntry ::= SEQUENCE { cd11IfCipherMicFailClientAddress MacAddress, cd11IfCipherTkipLocalMicFailures Counter, cd11IfCipherTkipRemotMicFailures Counter, cd11IfCipherTkipCounterMeasInvok Counter, cd11IfCipherCcmpReplaysDiscarded Counter, cd11IfCipherTkipReplaysDetected Counter } cd11IfCipherMicFailClientAddress OBJECT-TYPE SYNTAX MacAddress -- Rsyntax OCTET STRING(SIZE(6)) ACCESS read-only STATUS mandatory DESCRIPTION "This is MAC address of the client attached to this radio interface that caused the most recent MIC failure." ::= { cd11IfCipherStatsEntry 1 } cd11IfCipherTkipLocalMicFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object counts the number of MIC failures encountered on this radio interface since device re-started." ::= { cd11IfCipherStatsEntry 2 } cd11IfCipherTkipRemotMicFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object counts the number of MIC failures reported by clients on this radio interface since device re-started." ::= { cd11IfCipherStatsEntry 3 } cd11IfCipherTkipCounterMeasInvok OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object counts the number of TKIP Counter Measures invoked on this interface since device re-started." ::= { cd11IfCipherStatsEntry 4 } cd11IfCipherCcmpReplaysDiscarded OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object counts the number of received unicast fragments discarded by replay mechanism on this interface since device re-started." ::= { cd11IfCipherStatsEntry 5 } cd11IfCipherTkipReplaysDetected OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object counts the number of TKIP replay errors detected on this interface since device re-started." ::= { cd11IfCipherStatsEntry 6 } cDot11ClientConfigInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF CDot11ClientConfigInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains configuration information of client devices. Entries on this table are created by the device radio driver when clients establish association with the device. Entries are removed when clients disassociate with the device. These clients include: wireless clients, repeaters, and bridges. On Infrastructure clients like repeaters, non-root bridges and workgroup bridges, this table also has an entry for the parent device they are associated to." ::= { cDot11ClientConfiguration 1 } cDot11ClientConfigInfoEntry OBJECT-TYPE SYNTAX CDot11ClientConfigInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry is the device specification of a client of this device on the IEEE 802.11 radio interfaces. Clients are grouped according to the SSIDs of the interfaces they use for associations and the MAC address of their parent devices if the clients are repeat APs." INDEX { ifIndex, cd11IfAuxSsid, cDot11ClientAddress } ::= { cDot11ClientConfigInfoTable 1 } CDot11ClientConfigInfoEntry ::= SEQUENCE { cDot11ClientAddress MacAddress, cDot11ClientParentAddress MacAddress, cDot11ClientRoleClassType CDot11ClientRoleClassType, cDot11ClientDevType CDot11ClientDevType, cDot11ClientRadioType CDot11ClientRadioType, cDot11ClientWepEnabled TruthValue, cDot11ClientWepKeyMixEnabled TruthValue, cDot11ClientMicEnabled TruthValue, cDot11ClientPowerSaveMode INTEGER, cDot11ClientAid Gauge, cDot11ClientDataRateSet OCTET STRING, cDot11ClientSoftwareVersion SnmpAdminString, cDot11ClientName SnmpAdminString, cDot11ClientAssociationState INTEGER, cDot11ClientIpAddressType InetAddressType, cDot11ClientIpAddress InetAddress, cDot11ClientVlanId CDot11IfVlanIdOrZero, cDot11ClientSubIfIndex InterfaceIndex, cDot11ClientAuthenAlgorithm CDot11AuthenticationMethod, cDot11ClientAdditionalAuthen CDot11AdditionalAuthenMethod, cDot11ClientDot1xAuthenAlgorithm CDot11Dot1xAuthenMethod, cDot11ClientKeyManagement CDot11KeyManagementMethod, cDot11ClientUnicastCipher CDot11IfCipherType, cDot11ClientMulticastCipher CDot11IfCipherType, cDot11ClientDevObjectID OBJECT IDENTIFIER, cDot11ClientNewKeyManagement CDot11NewKeyManagementMethod } cDot11ClientAddress OBJECT-TYPE SYNTAX MacAddress -- Rsyntax OCTET STRING(SIZE(6)) ACCESS not-accessible STATUS mandatory DESCRIPTION "The MAC address of the client." ::= { cDot11ClientConfigInfoEntry 1 } cDot11ClientParentAddress OBJECT-TYPE SYNTAX MacAddress -- Rsyntax OCTET STRING(SIZE(6)) ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address of the parent of the client if the client is a repeater AP. If this client has no parent, the value is '00000000'h." ::= { cDot11ClientConfigInfoEntry 2 } cDot11ClientRoleClassType OBJECT-TYPE SYNTAX CDot11ClientRoleClassType -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- clientStation(0), -- repeater(1), -- accessPoint(2), -- bridgeHost(3), -- bridge(4), -- bridgeRoot(5), -- ethernetClient(6) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The role classification of the client." ::= { cDot11ClientConfigInfoEntry 3 } cDot11ClientDevType OBJECT-TYPE SYNTAX CDot11ClientDevType -- Rsyntax INTEGER { -- unknown(1), -- ethernetAP(76), -- ethernetBridge(77), -- pc3000Client(84), -- serialUC(85), -- ethernetUC(86), -- pc3500Client(101), -- pc4500Client(102), -- generic80211Client(104), -- pc4800Client(109), -- pc3100Client(110), -- mc(111), -- ethernetClient(112), -- pc4800bClient(117), -- wgbNoDiversity(123), -- wgb(124), -- series350Client(127), -- series370Client(128), -- c1100SeriesAP(129), -- c1410SeriesBridge(130), -- c1200SeriesAP(132), -- mp2xClient(133), -- c350SeriesAP(134), -- cb21agClient(135), -- radioKodiak(136), -- c1130SeriesAP(137), -- c1310SeriesBridge(138), -- c7920phone(139), -- c1240SeriesAP(140) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The device type of the client." ::= { cDot11ClientConfigInfoEntry 4 } cDot11ClientRadioType OBJECT-TYPE SYNTAX CDot11ClientRadioType -- Rsyntax INTEGER { -- unknown(1), -- ccxClient(2), -- pc3500(3), -- pc3000(4), -- pc4500(6), -- pc4800(12), -- pc3100(13), -- series340(33), -- series350(34), -- series370(35), -- bridge1410(36), -- mp2xSeries(37), -- rm2xSeries(38), -- rm2gSeries(39), -- mp2xMAR(40), -- cb21ag(46) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The radio classification of the client." ::= { cDot11ClientConfigInfoEntry 5 } cDot11ClientWepEnabled OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "When this object is 'true', it indicates that the WEP key mechanism is used for transmitting frames of data for this client. The default value of this object is 'false'." DEFVAL { false } ::= { cDot11ClientConfigInfoEntry 6 } cDot11ClientWepKeyMixEnabled OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "When this object is 'true', it indicates that this client is using WEP key mixing." DEFVAL { false } ::= { cDot11ClientConfigInfoEntry 7 } cDot11ClientMicEnabled OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "When this object is 'true', it indicates that the MIC is enabled for this client. The default value of this object is 'false'." DEFVAL { false } ::= { cDot11ClientConfigInfoEntry 8 } cDot11ClientPowerSaveMode OBJECT-TYPE SYNTAX INTEGER { active(1), powersave(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The power management mode of this client. The two possible modes are: active(1) - this client is not in power-save mode and it is actively sending or receiving data. powersave(2) - this client is in power-save mode and it wakes up once a while to check for pending data." DEFVAL { active } ::= { cDot11ClientConfigInfoEntry 9 } cDot11ClientAid OBJECT-TYPE SYNTAX Gauge(0..2008) ACCESS read-only STATUS mandatory DESCRIPTION "This is the association identification number of clients or multicast addresses associating with this device. For a multicast address with clients, the cDot11ClientAid is '0'. For the uplink association from this device to its parent access point, the cDot11ClientAid is always '1'. For any multicast address with no client currently known to be associated with this device, the cDot11ClientAid is '2008'." ::= { cDot11ClientConfigInfoEntry 10 } cDot11ClientDataRateSet OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..126)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the set of data rates at which this client can transmit and receive data. Each client can support up to 126 rates. Each octet contains an integer value representing one of these 126 rates. Each rate shall be within the range from 2 to 127, corresponding to data rates in increments of 500 kb/s from 1 Mb/s to 63.5 Mb/s, This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the client desires to synchronize is suitable. It is also used when starting a BSS." ::= { cDot11ClientConfigInfoEntry 11 } cDot11ClientSoftwareVersion OBJECT-TYPE SYNTAX SnmpAdminString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the Cisco IOS software version if the other end of the association is a bridge, access point, or repeater. If it is a wireless client, this is the firmware version of the client card." ::= { cDot11ClientConfigInfoEntry 12 } cDot11ClientName OBJECT-TYPE SYNTAX SnmpAdminString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the Cisco IOS device hostname if the other end of the association is a bridge, access point, or repeater. If it is a wireless client, this is the configured client name." ::= { cDot11ClientConfigInfoEntry 13 } cDot11ClientAssociationState OBJECT-TYPE SYNTAX INTEGER { initial(1), authenNotAssociated(2), assocAndAuthenticated(3), assocNotAnuthenticated(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the state of the authentication and association process between the two parties: initial(1) - association request received from client, authenNotAssociated(2) - 802.11 authenticated but not 802.11 associated, assocAndAuthenticated(3) - 802.11 associated and 802.1x authenticated, assocNotAnuthenticated(4) - 802.11 associated but 802.1x not authenticated." ::= { cDot11ClientConfigInfoEntry 14 } cDot11ClientIpAddressType OBJECT-TYPE SYNTAX InetAddressType -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- unknown(0), -- ipv4(1), -- ipv6(2), -- ipv4z(3), -- ipv6z(4), -- dns(16) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This is the IP address type of the cDot11ClientIpAddress." ::= { cDot11ClientConfigInfoEntry 15 } cDot11ClientIpAddress OBJECT-TYPE SYNTAX InetAddress -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the static or DHCP assigned IP address of the client." ::= { cDot11ClientConfigInfoEntry 16 } cDot11ClientVlanId OBJECT-TYPE SYNTAX CDot11IfVlanIdOrZero -- Rsyntax Gauge(0..4095) ACCESS read-only STATUS mandatory DESCRIPTION "This is the VLAN which this wireless client is assigned to when it is successfully associated to the wireless station. The value is 0 if this wireless client is not assigned to any VLAN or this wireless station is not configured with any VLAN." ::= { cDot11ClientConfigInfoEntry 17 } cDot11ClientSubIfIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the ifIndex of the sub-interface which this wireless client is assigned to when it is successfully associated to the wireless station. The value of this object is 0, if this wireless station is not configured with VLAN and this wireless client is assigned to the radio hardware interface of this wireless station." ::= { cDot11ClientConfigInfoEntry 18 } cDot11ClientAuthenAlgorithm OBJECT-TYPE SYNTAX CDot11AuthenticationMethod -- Rsyntax INTEGER { -- open(1), -- sharedKey(2), -- networkEap(129) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This is the IEEE 802.11 authentication methods performed between the wireless station and this client during association." ::= { cDot11ClientConfigInfoEntry 19 } cDot11ClientAdditionalAuthen OBJECT-TYPE SYNTAX CDot11AdditionalAuthenMethod -- Rsyntax OCTET STRING(SIZE(1..2)) -- BITS are: -- mac(0) -- eap(1) ACCESS read-only STATUS mandatory DESCRIPTION "These are the additional authentications that were performed after IEEE 802.11 Open System or Shared Key authentication had completed. If none of the bits is set, no additional MAC address or EAP authentication was performed during association." ::= { cDot11ClientConfigInfoEntry 20 } cDot11ClientDot1xAuthenAlgorithm OBJECT-TYPE SYNTAX CDot11Dot1xAuthenMethod -- Rsyntax OCTET STRING(SIZE(1..2)) -- BITS are: -- md5(0) -- leap(1) -- peap(2) -- eapTls(3) -- eapSim(4) -- eapFast(5) ACCESS read-only STATUS mandatory DESCRIPTION "This the IEEE 802.1x authentication methods performed between this wireless client and the authentication server. If none of the bits is set, no IEEE 802.1x authentication was performed during association." ::= { cDot11ClientConfigInfoEntry 21 } cDot11ClientKeyManagement OBJECT-TYPE SYNTAX CDot11KeyManagementMethod -- Rsyntax OCTET STRING(SIZE(1..2)) -- BITS are: -- wpa(0) -- cckm(1) ACCESS read-only STATUS deprecated DESCRIPTION "This is the encryption key management methods employed by this client for IEEE 802.11 wireless frame encryption. If none of the bits is set, no key management method is employed." ::= { cDot11ClientConfigInfoEntry 22 } cDot11ClientUnicastCipher OBJECT-TYPE SYNTAX CDot11IfCipherType -- Rsyntax OCTET STRING(SIZE(1..2)) -- BITS are: -- ckip(0) -- cmic(1) -- tkip(2) -- wep40(3) -- wep128(4) -- aesccm(5) ACCESS read-only STATUS mandatory DESCRIPTION "These are all the possible unicast data frame cipher encryption type combinations currently supported on this IEEE 802.11 client. If none of the bits is set, the client is not performing any unicast data frame encryption. aesccm WPA AES CCMP encryption, ckip Cisco Per packet key hashing, cmic Cisco MMH MIC, ckip|cmic Cisco Per packet key hashing and Cisco MMH MIC, tkip WPA Temporal Key encryption, wep128 128-bit WEP key, wep40 40-bit WEP key. tkip|wep128 WPA Temporal Key and 128-bit WEP, tkip|wep40 WPA Temporal Key and 40-bit WEP." ::= { cDot11ClientConfigInfoEntry 23 } cDot11ClientMulticastCipher OBJECT-TYPE SYNTAX CDot11IfCipherType -- Rsyntax OCTET STRING(SIZE(1..2)) -- BITS are: -- ckip(0) -- cmic(1) -- tkip(2) -- wep40(3) -- wep128(4) -- aesccm(5) ACCESS read-only STATUS mandatory DESCRIPTION "These are all the possible multi-cast data frame cipher encryption type combinations currently supported on this IEEE 802.11 client. If none of the bits is set, the client is not performing any multi-cast data frame encryption. aesccm WPA AES CCMP encryption, ckip Cisco Per packet key hashing, cmic Cisco MMH MIC, ckip|cmic Cisco Per packet key hashing and Cisco MMH MIC, tkip WPA Temporal Key encryption, wep128 128-bit WEP key, wep40 40-bit WEP key. tkip|wep128 WPA Temporal Key and 128-bit WEP, tkip|wep40 WPA Temporal Key and 40-bit WEP." ::= { cDot11ClientConfigInfoEntry 24 } cDot11ClientDevObjectID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the authoritative identification of the associated 802.11 client as assigned by the respective vendor. A value of '0.0' shall be populated if no such identification exists for this 802.11 client. " REFERENCE "sysObjectID from SNMPv2-MIB" ::= { cDot11ClientConfigInfoEntry 25 } cDot11ClientNewKeyManagement OBJECT-TYPE SYNTAX CDot11NewKeyManagementMethod -- Rsyntax OCTET STRING(SIZE(1..2)) -- BITS are: -- cckm(0) -- wpa1(1) -- wpa2(2) ACCESS read-only STATUS mandatory DESCRIPTION "This is the encryption key management methods employed by this client for IEEE 802.11 wireless frame encryption. If none of the bits is set, no key management method is employed." ::= { cDot11ClientConfigInfoEntry 26 } cDot11ClientStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF CDot11ClientStatisticEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains statistics and status of all clients on the cDot11ClientConfigInfoTable. This table has a one-to-one relationship with the cDot11ClientConfigInfoTable." ::= { cDot11ClientStatistics 1 } cDot11ClientStatisticEntry OBJECT-TYPE SYNTAX CDot11ClientStatisticEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains statistics about errors, data transmitting and receiving rates and counts information of a client." INDEX { ifIndex, cd11IfAuxSsid, cDot11ClientAddress } -- Augments cDot11ClientConfigInfoEntry ::= { cDot11ClientStatisticTable 1 } CDot11ClientStatisticEntry ::= SEQUENCE { cDot11ClientCurrentTxRateSet OCTET STRING, cDot11ClientUpTime Gauge, cDot11ClientSignalStrength INTEGER, cDot11ClientSigQuality Gauge, cDot11ClientAgingLeft Gauge, cDot11ClientPacketsReceived Counter, cDot11ClientBytesReceived Counter, cDot11ClientPacketsSent Counter, cDot11ClientBytesSent Counter, cDot11ClientDuplicates Counter, cDot11ClientMsduRetries Counter, cDot11ClientMsduFails Counter, cDot11ClientWepErrors Counter, cDot11ClientMicErrors Counter, cDot11ClientMicMissingFrames Counter } cDot11ClientCurrentTxRateSet OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..126)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the set current transmit data rates for this client. Each client can transmit data at all of its configured rates. There is a maximum of 126 it can configure to transmit. Each octet contains an integer value representing one of these 126 rates it is currently transmitting. Each rate shall be within the range from 2 to 127, corresponding to data rates in increments of 500 kb/s from 1 Mb/s to 63.5 Mb/s. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames." ::= { cDot11ClientStatisticEntry 1 } cDot11ClientUpTime OBJECT-TYPE SYNTAX Gauge -- Units -- second ACCESS read-only STATUS mandatory DESCRIPTION "The time in seconds that this client has been associated with this device." ::= { cDot11ClientStatisticEntry 2 } cDot11ClientSignalStrength OBJECT-TYPE SYNTAX INTEGER(-100..0) -- Units -- dBm ACCESS read-only STATUS mandatory DESCRIPTION "This is a device-dependent measure of the signal strength of the most recently received packet from this client. It may be normalized or unnormalized." ::= { cDot11ClientStatisticEntry 3 } cDot11ClientSigQuality OBJECT-TYPE SYNTAX Gauge(0..100) -- Units -- percentage ACCESS read-only STATUS mandatory DESCRIPTION "This is a device-dependent measure of the signal quality of the most recently received packet from this client." ::= { cDot11ClientStatisticEntry 4 } cDot11ClientAgingLeft OBJECT-TYPE SYNTAX Gauge -- Units -- second ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds of aging time left for this client." ::= { cDot11ClientStatisticEntry 5 } cDot11ClientPacketsReceived OBJECT-TYPE SYNTAX Counter -- Units -- packet ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets received from this client." ::= { cDot11ClientStatisticEntry 6 } cDot11ClientBytesReceived OBJECT-TYPE SYNTAX Counter -- Units -- byte ACCESS read-only STATUS mandatory DESCRIPTION "The number of bytes received from this client." ::= { cDot11ClientStatisticEntry 7 } cDot11ClientPacketsSent OBJECT-TYPE SYNTAX Counter -- Units -- packet ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets sent to this client." ::= { cDot11ClientStatisticEntry 8 } cDot11ClientBytesSent OBJECT-TYPE SYNTAX Counter -- Units -- byte ACCESS read-only STATUS mandatory DESCRIPTION "The number of bytes sent to this client." ::= { cDot11ClientStatisticEntry 9 } cDot11ClientDuplicates OBJECT-TYPE SYNTAX Counter -- Units -- packet ACCESS read-only STATUS mandatory DESCRIPTION "This counter increments when a packet for this client is received and the Sequence Control field in the packet header indicates the packet is a duplicate." ::= { cDot11ClientStatisticEntry 10 } cDot11ClientMsduRetries OBJECT-TYPE SYNTAX Counter -- Units -- packet ACCESS read-only STATUS mandatory DESCRIPTION "This counter increments when an MSDU is successfully transmitted after one or more retransmissions for this client." ::= { cDot11ClientStatisticEntry 11 } cDot11ClientMsduFails OBJECT-TYPE SYNTAX Counter -- Units -- packet ACCESS read-only STATUS mandatory DESCRIPTION "This counter increments when an MSDU is not transmitted successfully for this client due to the number of transmit attempts exceeding some limit." ::= { cDot11ClientStatisticEntry 12 } cDot11ClientWepErrors OBJECT-TYPE SYNTAX Counter -- Units -- packet ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of packets received from this client which failed to be properly decrypted via the WEP security mechanism." ::= { cDot11ClientStatisticEntry 13 } cDot11ClientMicErrors OBJECT-TYPE SYNTAX Counter -- Units -- error ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of MIC errors for this client." ::= { cDot11ClientStatisticEntry 14 } cDot11ClientMicMissingFrames OBJECT-TYPE SYNTAX Counter -- Units -- packet ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of missing MIC packets for this client." ::= { cDot11ClientStatisticEntry 15 } ciscoDot11AssocGlobalGroup OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBGroups 1 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- This is the device association information group. -- This is deprecated in favor of the -- ciscoDot11IfAssocStatGroup. -- objects -- cDot11ParentAddress, cDot11ActiveWirelessClients, -- cDot11ActiveBridges, cDot11ActiveRepeaters, -- cDot11AssStatsAssociated, cDot11AssStatsAuthenticated, -- cDot11AssStatsRoamedIn, cDot11AssStatsRoamedAway, -- cDot11AssStatsDeauthenticated, cDot11AssStatsDisassociated ciscoDot11ClientConfigGroup OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- This is the client configuration information group. -- objects -- cDot11ClientParentAddress, cDot11ClientRoleClassType, -- cDot11ClientDevType, cDot11ClientRadioType, -- cDot11ClientWepEnabled, cDot11ClientWepKeyMixEnabled, -- cDot11ClientMicEnabled, cDot11ClientPowerSaveMode, -- cDot11ClientAid, cDot11ClientDataRateSet ciscoDot11ClientStatGroup OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- This is the client statistics group. -- objects -- cDot11ClientCurrentTxRateSet, cDot11ClientUpTime, -- cDot11ClientSignalStrength, cDot11ClientSigQuality, -- cDot11ClientPacketsReceived, cDot11ClientBytesReceived, -- cDot11ClientPacketsSent, cDot11ClientBytesSent, -- cDot11ClientAgingLeft, cDot11ClientDuplicates, -- cDot11ClientMsduRetries, cDot11ClientMsduFails, -- cDot11ClientWepErrors, cDot11ClientMicErrors, -- cDot11ClientMicMissingFrames ciscoDot11ClientInfoGroup OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBGroups 4 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- This group provides additional client specific -- information. -- objects -- cDot11ClientSoftwareVersion, cDot11ClientName, -- cDot11ClientAssociationState, cDot11ClientIpAddressType, -- cDot11ClientIpAddress ciscoDot11ApAssocGlobalGroup OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBGroups 5 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- This group includes per AP or bridge global -- configuration information. -- objects -- cDot11ParentAddress ciscoDot11IfAssocStatGroup OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBGroups 6 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- This group includes per IEEE 802.11 radio -- interface association statistics. -- objects -- cDot11ActiveWirelessClients, cDot11ActiveBridges, -- cDot11ActiveRepeaters, cDot11AssStatsAssociated, -- cDot11AssStatsAuthenticated, cDot11AssStatsRoamedIn, -- cDot11AssStatsRoamedAway, cDot11AssStatsDeauthenticated, -- cDot11AssStatsDisassociated ciscoDot11IfCipherStatGroup OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBGroups 7 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- This group includes per IEEE 802.11 radio -- interface cipher related statistics collected. -- objects -- cd11IfCipherMicFailClientAddress, -- cd11IfCipherTkipLocalMicFailures, -- cd11IfCipherTkipRemotMicFailures, -- cd11IfCipherTkipCounterMeasInvok, -- cd11IfCipherCcmpReplaysDiscarded, -- cd11IfCipherTkipReplaysDetected ciscoDot11ClientAuthenGroup OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBGroups 8 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- This group includes per IEEE 802.11 radio -- interface cipher related statistics collected. -- objects -- cDot11ClientVlanId, cDot11ClientSubIfIndex, -- cDot11ClientAuthenAlgorithm, cDot11ClientAdditionalAuthen, -- cDot11ClientDot1xAuthenAlgorithm, cDot11ClientKeyManagement, -- cDot11ClientUnicastCipher, cDot11ClientMulticastCipher ciscoDot11ClientConfigExtGroup OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBGroups 9 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- This group provides more configuration -- information about a particular associated 802.11 -- client. -- objects -- cDot11ClientDevObjectID ciscoDot11ClientNewAuthenGroup OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBGroups 10 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- This group includes per IEEE 802.11 radio -- interface cipher related statistics collected. -- objects -- cDot11ClientNewKeyManagement ciscoDot11AssocMIBCompliance OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The compliance statement for the ciscoDot11Assoc -- group. -- Module -- >>current<< -- MandGroup -- ciscoDot11AssocGlobalGroup -- MandGroup -- ciscoDot11ClientConfigGroup -- MandGroup -- ciscoDot11ClientStatGroup ciscoDot11AssocMIBComplianceRev1 OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBCompliances 2 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The compliance statement for the ciscoDot11Assoc -- group. This is deprecated in favor of the -- ciscoDot11AssocMIBComplianceRev2. -- Module -- >>current<< -- MandGroup -- ciscoDot11AssocGlobalGroup -- MandGroup -- ciscoDot11ClientConfigGroup -- MandGroup -- ciscoDot11ClientStatGroup -- MandGroup -- ciscoDot11ClientInfoGroup ciscoDot11AssocMIBComplianceRev2 OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBCompliances 3 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The compliance statement for the ciscoDot11Assoc -- group. -- Module -- >>current<< -- MandGroup -- ciscoDot11ClientConfigGroup -- MandGroup -- ciscoDot11ClientStatGroup -- MandGroup -- ciscoDot11ClientInfoGroup -- MandGroup -- ciscoDot11IfAssocStatGroup -- MandGroup -- ciscoDot11IfCipherStatGroup -- OptGroup -- ciscoDot11ApAssocGlobalGroup ciscoDot11AssocMIBComplianceRev3 OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBCompliances 4 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The compliance statement for this -- ciscoDot11AssociationMIB module. -- Module -- >>current<< -- MandGroup -- ciscoDot11ClientConfigGroup -- MandGroup -- ciscoDot11ClientAuthenGroup -- MandGroup -- ciscoDot11ClientStatGroup -- MandGroup -- ciscoDot11ClientInfoGroup -- MandGroup -- ciscoDot11IfAssocStatGroup -- MandGroup -- ciscoDot11IfCipherStatGroup -- OptGroup -- ciscoDot11ApAssocGlobalGroup ciscoDot11AssocMIBComplianceRev4 OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBCompliances 5 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for this -- ciscoDot11AssociationMIB module. -- Module -- >>current<< -- MandGroup -- ciscoDot11ClientConfigGroup -- MandGroup -- ciscoDot11ClientAuthenGroup -- MandGroup -- ciscoDot11ClientStatGroup -- MandGroup -- ciscoDot11ClientInfoGroup -- MandGroup -- ciscoDot11IfAssocStatGroup -- MandGroup -- ciscoDot11IfCipherStatGroup -- MandGroup -- ciscoDot11ClientConfigExtGroup -- OptGroup -- ciscoDot11ApAssocGlobalGroup ciscoDot11AssocMIBComplianceRev5 OBJECT IDENTIFIER ::= { ciscoDot11AssocMIBCompliances 6 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for this -- ciscoDot11AssociationMIB module. -- Module -- >>current<< -- MandGroup -- ciscoDot11ClientConfigGroup -- MandGroup -- ciscoDot11ClientAuthenGroup -- MandGroup -- ciscoDot11ClientStatGroup -- MandGroup -- ciscoDot11ClientInfoGroup -- MandGroup -- ciscoDot11IfAssocStatGroup -- MandGroup -- ciscoDot11IfCipherStatGroup -- MandGroup -- ciscoDot11ClientConfigExtGroup -- MandGroup -- ciscoDot11ClientNewAuthenGroup -- OptGroup -- ciscoDot11ApAssocGlobalGroup END