-- MIB file created 09-Dec-2005 10:15:17, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-DOT11-LBS-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-DOT11-LBS-MIB.my"
-- Compile options "4 7 F H N O W 03 06 0B 0G 0N 0T"

IMPORTS
    MacAddress, RowStatus, TruthValue
            FROM SNMPv2-TC-v1
    ifIndex
            FROM IF-MIB
    InetPortNumber, InetAddressType, InetAddress
            FROM INET-ADDRESS-MIB
    SnmpAdminString
            FROM SNMP-FRAMEWORK-MIB
    ciscoMgmt
            FROM CISCO-SMI
    OBJECT-TYPE
            FROM RFC-1212;

ciscoDot11LbsMIB OBJECT IDENTIFIER ::= { ciscoMgmt 454 }
-- MODULE-IDENTITY
--  LastUpdated
--    200411170000Z
--  OrgName
--    Cisco System Inc.
--  ContactInfo
--           Cisco Systems
--            Customer Service
--    
--    Postal: 170 West Tasman Drive,
--            San Jose CA 95134-1706.
--            USA
--    
--       Tel: +1 800 553-NETS
--    
--    E-mail: cs-dot11@cisco.com
--  Descr
--    This MIB module supports network management 
--    for Location Based Services on IEEE 802.11 wireless
--    LAN devices.  Location Based Services allows third
--    party applications and positioning servers to work 
--    with Access Points to track positions of wireless 
--    clients in the network.  
--    
--              GLOSSARY and ACRONYMS
--    
--    AP
--        Access point, a transmitter/receiver device
--        that commonly connects and transports data
--        between a wireless network and a wired network.
--    
--    LBS 
--        Location Based Services
--    
--    MAC
--        Medium Access Control.  Layer 2 in the network 
--        model. 
--    
--    PS
--        Positioning Server.  An application server
--        provides IEEE 802.11 wireless client location
--        information and services.
--    
--    RSSI 
--        Received Signal Strength Indication.
--  RevDate
--    200411170000Z
--  RevDescr
--    Initial version of this MIB module.

ciscoDot11LbsMIBNotifs OBJECT IDENTIFIER ::= { ciscoDot11LbsMIB 0 }
ciscoDot11LbsMIBObjects OBJECT IDENTIFIER ::= { ciscoDot11LbsMIB 1 }
ciscoDot11LbsMIBConformance OBJECT IDENTIFIER ::= { ciscoDot11LbsMIB 2 }
ciscoDot11LbsConfigInfo OBJECT IDENTIFIER ::= { ciscoDot11LbsMIBObjects 1 }
ciscoDot11LbsStatistics OBJECT IDENTIFIER ::= { ciscoDot11LbsMIBObjects 2 }
ciscoDot11LbsMIBCompliances OBJECT IDENTIFIER ::= { ciscoDot11LbsMIBConformance 1 }
ciscoDot11LbsMIBGroups OBJECT IDENTIFIER ::= { ciscoDot11LbsMIBConformance 2 }

Cdot11LbsTrackMethodType ::= OCTET STRING(SIZE(1..2))
        -- BITS are:
        --   rssi(0)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    These are the supported methods for wireless
--    client location tracking:
--        rssi(0)    - RSSI detection.

Cdot11LbsPsPacketType ::= INTEGER {
        extended(1),
        short(2)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    These are the types of packets sending to the
--    positioning server.  There are two packet types:
--        extended(1) -  all data field from LBS message
--                       Tag and header are included,
--        short(2)    -  only the LBS message header will
--                       be included in the PS packets.

cdot11LbsProfileTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Cdot11LbsProfileEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains the set of attributes for 
        configuration of connection to remote LBS positioning
        servers and tracking methods supported on the servers.
        A positioning server may support LBS application at 
        multiple UDP ports.  This wireless station serves as
        a LBS agent to track the wireless client device.  It
        receives multicast wireless packet sending by the 
        client devices on specific multicast addresses and 
        forward the information to the positioning server."
    ::= { ciscoDot11LbsConfigInfo 1 }

cdot11LbsProfileEntry OBJECT-TYPE
    SYNTAX Cdot11LbsProfileEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry contains parameters to configure
        a LBS positioning server profile for this wireless
        station."
    INDEX { cdot11LbsProfileName }
    ::= { cdot11LbsProfileTable 1 }

Cdot11LbsProfileEntry ::= SEQUENCE {
    cdot11LbsProfileName SnmpAdminString,
    cdot11LbsServerAddressType InetAddressType,
    cdot11LbsServerAddress InetAddress,
    cdot11LbsServerUdpPort InetPortNumber,
    cdot11LbsTrackMethod Cdot11LbsTrackMethodType,
    cdot11LbsPsPacketType Cdot11LbsPsPacketType,
    cdot11LbsTrackMulticast MacAddress,
    cdot11LbsMatchChannel TruthValue,
    cdot11LbsProfileRowStatus RowStatus
    }

cdot11LbsProfileName OBJECT-TYPE
    SYNTAX SnmpAdminString(SIZE(1..16))
--    Rsyntax OCTET STRING(SIZE(1..16))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This is the name of LBS profile for configuration of
        a connection to a LBS positioning server at a specific
        address and UDP port."
    ::= { cdot11LbsProfileEntry 1 }

cdot11LbsServerAddressType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This is the address type of the 
        cdot11LbsServerAddress."
    DEFVAL { ipv4 }
    ::= { cdot11LbsProfileEntry 2 }

cdot11LbsServerAddress OBJECT-TYPE
    SYNTAX InetAddress
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This is the address of the LBS positioning server.
        The cdot11LbsServerAddressType specifies the 
        type of this address."
    ::= { cdot11LbsProfileEntry 3 }

cdot11LbsServerUdpPort OBJECT-TYPE
    SYNTAX InetPortNumber
--    Rsyntax Gauge(0..65535)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This is the UDP port of the LBS positioning server
        used to receive LBS packets from this wireless
        station."
    ::= { cdot11LbsProfileEntry 4 }

cdot11LbsTrackMethod OBJECT-TYPE
    SYNTAX Cdot11LbsTrackMethodType
--    Rsyntax OCTET STRING(SIZE(1..2))
--         BITS are:
--           rssi(0)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This specifies the method used to detect the
        location of the wireless client relative to the
        position of this wireless station.  RSSI method
        uses the strength of the received signals from
        the wireless client devices to determine their 
        positions."
    DEFVAL { '80'h }
    ::= { cdot11LbsProfileEntry 5 }

cdot11LbsPsPacketType OBJECT-TYPE
    SYNTAX Cdot11LbsPsPacketType
--    Rsyntax INTEGER {
--        extended(1),
--        short(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This specifies the type of LBS packets sent to 
        the LBS position server from this wireless station."
    DEFVAL { extended }
    ::= { cdot11LbsProfileEntry 6 }

cdot11LbsTrackMulticast OBJECT-TYPE
    SYNTAX MacAddress
--    Rsyntax OCTET STRING(SIZE(6))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This is the multicast MAC destination address
        of the LBS frames sending from the wireless 
        clients to this wireless station."
    DEFVAL { '014096000010'H }
    ::= { cdot11LbsProfileEntry 7 }

cdot11LbsMatchChannel OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object determines if this wireless station will
        include LBS frames received in channels other than
        the sender's channel in the RSSI measurement.  If the
        value is 'true', this station will include only LBS 
        frames matching the sender's channel in the RSSI
        measurement.  If the value is 'false', all received
        LBS frames will be included in the measurement."
    DEFVAL { true }
    ::= { cdot11LbsProfileEntry 8 }

cdot11LbsProfileRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This configures a new LBS positioning server for this
        wireless station and modifies or deletes an existing 
        positioning server configuration.
        
        Creation of rows must be done via 'createAndGo' and
        with the cdot11LbsServerAddress and
        cdot11LbsServerUdpPort set to the address and UDP
        of the LBS positioning server.
        
        This object will become 'notInService' if the NMS 
        successfully performs a multivarbind set for all 
        required objects including this object while this
        profile is not attached to any wireless interface
        or a connection cannot be established to the LBS
        positioning server.
        
        This object will become 'active' when this profile
        is attached to at least one wireless interface via 
        cdot11LbsProfInterfaceTable and a connection to the
        LBS positioning server is successfully established. 
        
        Modification and deletion (via 'destroy') of rows can
        be done when this object is 'active', or 
        'notInService'.  Deletion of a row will remove the
        corresponding entries for the same profile from the
        cdot11LbsProfInterfaceTable."
    ::= { cdot11LbsProfileEntry 9 }

cdot11LbsProfInterfaceTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Cdot11LbsProfileInterfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table configures the Location Based Services
        settings on the IEEE 802.11 radio interfaces of 
        this device.                  
        
        This table has an expansion dependent relationship
        on the cdot11LbsProfileTable.  This table uses the
        ifIndex of interfaces of ifType ieee80211(71) as 
        the expansion index."
    ::= { ciscoDot11LbsConfigInfo 2 }

cdot11LbsProfInterfaceEntry OBJECT-TYPE
    SYNTAX Cdot11LbsProfileInterfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry indicates if the LBS client location 
        tracking by a particular location positioning server
        profile is enabled on an IEEE 802.11 interface."
    INDEX { cdot11LbsProfileName, ifIndex }
    ::= { cdot11LbsProfInterfaceTable 1 }

Cdot11LbsProfileInterfEntry ::= SEQUENCE {
    cdot11LbsProfInterfaceRowStatus RowStatus
    }

cdot11LbsProfInterfaceRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This configures and attaches a LBS profile to an 
        IEEE 802.11 wireless LAN network interface or remove
        a configured interface from the profile.
        
        Creation of rows must be done via 'createAndGo' and
        specifying the cdot11LbsProfileName of an existing
        profile and the ifIndex of an IEEE 802.11 interface. 
        
        This object will become 'active' when the profile is
        attached to a network interface and a connection to the
        LBS positioning server is successfully established. 
        Otherwise, if this object will become 'notInService'.
        
        Modification and deletion (via 'destroy') of rows can
        be done when this object is 'active' or 'notInService'.
        
        If all interfaces are removed from an 'active' profile,
        the profile cdot11LbsProfileRowStatus will become
        'notInService'."
    ::= { cdot11LbsProfInterfaceEntry 1 }

ciscoDot11LbsConfigGroup OBJECT IDENTIFIER ::= { ciscoDot11LbsMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Configurations for IEEE 802.11 Location Based
--    Services.
--  objects
--    cdot11LbsServerAddressType, cdot11LbsServerAddress, 
--    cdot11LbsServerUdpPort, cdot11LbsTrackMethod, 
--    cdot11LbsPsPacketType, cdot11LbsTrackMulticast, 
--    cdot11LbsMatchChannel, cdot11LbsProfileRowStatus, 
--    cdot11LbsProfInterfaceRowStatus

ciscoDot11LbsMIBCompliance OBJECT IDENTIFIER ::= { ciscoDot11LbsMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for the 
--    ciscoDot11LbsMIB module.
--  Module
--    >>current<<
--   MandGroup
--    ciscoDot11LbsConfigGroup


END