-- MIB created 6/25/99 12:57:12, by -- SMIC (the next generation) version 1.6.29, November 22, 1994. CISCO-DSPU-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-DSPU-MIB.my" IMPORTS Counter32, Integer32 FROM SNMPv2-SMI-v1 OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 DisplayString, MacAddress, TruthValue, TimeStamp, RowStatus FROM SNMPv2-TC-v1 ciscoMgmt FROM CISCO-SMI; ciscoDspuMIB OBJECT IDENTIFIER ::= { ciscoMgmt 24 } -- MODULE-IDENTITY -- LastUpdated -- 9508150000Z -- OrgName -- Cisco Systems, Inc. -- ContactInfo -- Cisco Systems -- Customer Service -- -- Postal: 170 West Tasman Drive -- San Jose, CA 95134 -- USA -- -- Tel: +1 800 553-NETS -- -- E-mail: cs-snmp@cisco.com -- Descr -- Used to define and manage DSPU objects. -- RevDate -- 9512180000Z -- RevDescr -- Declare some Trap objects obsolete and create -- new Trap Objects to permit Trap generation. -- RevDate -- 9508150000Z -- RevDescr -- Specify a correct (non-negative) range for several -- index objects. -- RevDate -- 9501250000Z -- RevDescr -- Updated compliance/conformance information. dspuObjects OBJECT IDENTIFIER ::= { ciscoDspuMIB 1 } dspuNode OBJECT IDENTIFIER ::= { dspuObjects 1 } dspuPoolClass OBJECT IDENTIFIER ::= { dspuObjects 2 } dspuPooledLu OBJECT IDENTIFIER ::= { dspuObjects 3 } dspuPu OBJECT IDENTIFIER ::= { dspuObjects 4 } dspuLu OBJECT IDENTIFIER ::= { dspuObjects 5 } dspuSap OBJECT IDENTIFIER ::= { dspuObjects 6 } dspuPuTraps OBJECT IDENTIFIER ::= { dspuPu 4 } dspuPuTrapsPrefix OBJECT IDENTIFIER ::= { dspuPuTraps 0 } dspuLuTraps OBJECT IDENTIFIER ::= { dspuLu 3 } dspuLuTrapsPrefix OBJECT IDENTIFIER ::= { dspuLuTraps 0 } dspuSapTraps OBJECT IDENTIFIER ::= { dspuSap 2 } ciscoDspuMIBConformance OBJECT IDENTIFIER ::= { ciscoDspuMIB 2 } ciscoDspuMIBCompliances OBJECT IDENTIFIER ::= { ciscoDspuMIBConformance 1 } ciscoDspuMIBGroups OBJECT IDENTIFIER ::= { ciscoDspuMIBConformance 2 } dspuNodeRsrb OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "RSRB feature enabled/disabled for the DSPU node. TRUE -> RSRB feature enabled FALSE -> RSRB feature disabled If the RSRB feature is enabled, the following object values must be valid (i.e. non-zero): - dspuNodeRsrbLocalVirtualRing - dspuNodeRsrbBridgeNumber - dspuNodeRsrbTargetVirtualRing - dspuNodeRsrbVirtualMacAddress" DEFVAL { false } ::= { dspuNode 1 } dspuNodeRsrbLocalVirtualRing OBJECT-TYPE SYNTAX INTEGER(0..4096) ACCESS read-write STATUS mandatory DESCRIPTION "Local virtual ring number used by the DSPU node. LocalVirtualRing is zero if RSRB is not enabled." ::= { dspuNode 2 } dspuNodeRsrbBridgeNumber OBJECT-TYPE SYNTAX INTEGER(0..15) ACCESS read-write STATUS mandatory DESCRIPTION "Bridge number connecting the DSPU LocalVirtualRing with the RSRB TargetVirtualRing. Currently, the only valid BridgeNumber supported is 1. BridgeNumber must be one if RSRB is enabled. BridgeNumber is zero if RSRB is not enabled." ::= { dspuNode 3 } dspuNodeRsrbTargetVirtualRing OBJECT-TYPE SYNTAX INTEGER(0..4096) ACCESS read-write STATUS mandatory DESCRIPTION "Target virtual ring number used for RSRB. TargetVirtualRing is zero if RSRB is not enabled." ::= { dspuNode 4 } dspuNodeRsrbVirtualMacAddress OBJECT-TYPE SYNTAX MacAddress -- Rsyntax OCTET STRING(SIZE(6)) ACCESS read-write STATUS mandatory DESCRIPTION "Virtual MAC address of the the DSPU node. VirtualMacAddress is zero if RSRB is not enabled." ::= { dspuNode 5 } dspuNodeDefaultPu OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Default-PU feature enabled/disabled for the DSPU node. TRUE -> Default-PU feature enabled FALSE -> Default-PU feature disabled" DEFVAL { false } ::= { dspuNode 6 } dspuNodeDefaultPuWindowSize OBJECT-TYPE SYNTAX INTEGER(1..127) ACCESS read-write STATUS mandatory DESCRIPTION "Send/receive window size to be used across the link between the default-PU and a remote PU." DEFVAL { 7 } ::= { dspuNode 7 } dspuNodeDefaultPuMaxIframe OBJECT-TYPE SYNTAX INTEGER(64..18432) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum size of an I-frame that can be transmitted/received across the link between the default-PU and a remote PU." DEFVAL { 1472 } ::= { dspuNode 8 } dspuNodeActivationWindow OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Activation pacing window used by the DSPU node to limit the number of activation RUs sent for a given SAP before waiting for responses from the remote." DEFVAL { 10 } ::= { dspuNode 9 } dspuNodeLastConfigChgTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Timestamp of last change to DSPU configuration parameters. LastConfigChgTime reflects any change in DSPU configuration." ::= { dspuNode 10 } dspuPoolClassTable OBJECT-TYPE SYNTAX SEQUENCE OF DspuPoolClassEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table listing defined pool classes for the DSPU node. A pool class is defined at the DSPU node as a pool of upstream LUs that may be shared among downstream PUs. Each entry in the table represents a separate pool class definition. Entries in the table may not be created/deleted; however, values in existing entries may be modified. Pool classes are created when an existing LU is defined as a member of the pool class." ::= { dspuPoolClass 1 } dspuPoolClassEntry OBJECT-TYPE SYNTAX DspuPoolClassEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a defined pool class." INDEX { dspuPoolClassIndex } ::= { dspuPoolClassTable 1 } DspuPoolClassEntry ::= SEQUENCE { dspuPoolClassIndex Integer32(0..2147483647), dspuPoolClassName DisplayString, dspuPoolClassInactivityTimeout INTEGER, dspuPoolClassOperUpStreamLuDefs Integer32, dspuPoolClassOperDnStreamLuDefs Integer32 } dspuPoolClassIndex OBJECT-TYPE SYNTAX Integer32(0..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Index of a pool class entry in the dspuPoolClassTable." ::= { dspuPoolClassEntry 1 } dspuPoolClassName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..10)) -- Rsyntax OCTET STRING(SIZE(0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Name identifier of the pool class." ::= { dspuPoolClassEntry 2 } dspuPoolClassInactivityTimeout OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Value (in minutes) of the inactivity timeout that will be applied to active LU sessions assigned from the pool class. The inactivity timeout feature for pooled LUs is disabled if the InactivityTimeout value is zero." DEFVAL { 0 } ::= { dspuPoolClassEntry 3 } dspuPoolClassOperUpStreamLuDefs OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of upstream LUs defined in the pool class." ::= { dspuPoolClassEntry 4 } dspuPoolClassOperDnStreamLuDefs OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of downstream LUs defined in the pool class." ::= { dspuPoolClassEntry 5 } dspuPooledLuTable OBJECT-TYPE SYNTAX SEQUENCE OF DspuPooledLuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table listing all LUs defined in a specified pool class. The entries in the table provide information such that the downstream LUs in the pool can be correlated with the upstream LUs to which they may be assigned and vice versa. If all upstream LUs have been assigned, downstream LUs may be waiting for assignment. If there are no downstream LUs waiting for assignment, upstream LUs may be unassigned." ::= { dspuPooledLu 1 } dspuPooledLuEntry OBJECT-TYPE SYNTAX DspuPooledLuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents an LU that is defined as a member of the specified pool class." INDEX { dspuPoolClassIndex, dspuPuOperIndex, dspuLuOperLuLocalAddress } ::= { dspuPooledLuTable 1 } DspuPooledLuEntry ::= SEQUENCE { dspuPooledLuPeerPuIndex Integer32, dspuPooledLuPeerLuLocalAddress INTEGER } dspuPooledLuPeerPuIndex OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "Index (dspuPuOperIndex) of the peer PU that owns the peer LU. PeerPuIndex is zero if peer LU has not been assigned." ::= { dspuPooledLuEntry 1 } dspuPooledLuPeerLuLocalAddress OBJECT-TYPE SYNTAX INTEGER(0..254) ACCESS read-only STATUS mandatory DESCRIPTION "NAU address (dspuLuOperLuLocalAddress) of the peer LU. PeerLuLocalAddress is zero if peer LU has not been assigned." ::= { dspuPooledLuEntry 2 } dspuPuAdminTable OBJECT-TYPE SYNTAX SEQUENCE OF DspuPuAdminEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table listing all defined upstream/downstream PUs that are owned by the DSPU node. NOTE: The dspuPuAdminTable does not include default downstream PUs that may be dynamically created." ::= { dspuPu 1 } dspuPuAdminEntry OBJECT-TYPE SYNTAX DspuPuAdminEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a defined upstream/downstream PU." INDEX { dspuPuAdminIndex } ::= { dspuPuAdminTable 1 } DspuPuAdminEntry ::= SEQUENCE { dspuPuAdminIndex Integer32(0..2147483647), dspuPuAdminName DisplayString, dspuPuAdminType INTEGER, dspuPuAdminRemoteMacAddress MacAddress, dspuPuAdminRemoteSapAddress INTEGER, dspuPuAdminLocalSapAddress INTEGER, dspuPuAdminXid Integer32, dspuPuAdminXidFmt INTEGER, dspuPuAdminWindowSize INTEGER, dspuPuAdminMaxIframe INTEGER, dspuPuAdminLinkRetryCount INTEGER, dspuPuAdminLinkRetryTimeout INTEGER, dspuPuAdminStartPu TruthValue, dspuPuAdminDlcType INTEGER, dspuPuAdminDlcUnit INTEGER, dspuPuAdminDlcPort INTEGER, dspuPuAdminFocalPoint TruthValue, dspuPuAdminRowStatus RowStatus, dspuPuAdminRemoteAddress DisplayString } dspuPuAdminIndex OBJECT-TYPE SYNTAX Integer32(0..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Index of the PU entry in the dspuPuAdminTable." ::= { dspuPuAdminEntry 1 } dspuPuAdminName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..8)) -- Rsyntax OCTET STRING(SIZE(0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "Name of the PU." ::= { dspuPuAdminEntry 2 } dspuPuAdminType OBJECT-TYPE SYNTAX INTEGER { upstreamPu(1), dnstreamPu(2) } ACCESS read-write STATUS mandatory DESCRIPTION "PU Type is either upstream or downstream." ::= { dspuPuAdminEntry 3 } dspuPuAdminRemoteMacAddress OBJECT-TYPE SYNTAX MacAddress -- Rsyntax OCTET STRING(SIZE(6)) ACCESS read-write STATUS mandatory DESCRIPTION "MAC address of the remote PU." ::= { dspuPuAdminEntry 4 } dspuPuAdminRemoteSapAddress OBJECT-TYPE SYNTAX INTEGER(1..254) ACCESS read-write STATUS mandatory DESCRIPTION "SAP address of the remote PU." DEFVAL { 4 } ::= { dspuPuAdminEntry 5 } dspuPuAdminLocalSapAddress OBJECT-TYPE SYNTAX INTEGER(1..254) ACCESS read-write STATUS mandatory DESCRIPTION "SAP address of the local PU." DEFVAL { 8 } ::= { dspuPuAdminEntry 6 } dspuPuAdminXid OBJECT-TYPE SYNTAX Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "Upstream PU : XID that will be sent to the remote PU. Dnstream PU : XID that must be received from the remote PU." ::= { dspuPuAdminEntry 7 } dspuPuAdminXidFmt OBJECT-TYPE SYNTAX INTEGER { formatUnknown(1), format0(2), format3(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of XID format used during activation of the link between this dspuNode and the remote PU." DEFVAL { format3 } ::= { dspuPuAdminEntry 8 } dspuPuAdminWindowSize OBJECT-TYPE SYNTAX INTEGER(1..127) ACCESS read-write STATUS mandatory DESCRIPTION "Send/Receive window size to be used across the link between this dspuNode and the remote PU." DEFVAL { 7 } ::= { dspuPuAdminEntry 9 } dspuPuAdminMaxIframe OBJECT-TYPE SYNTAX INTEGER(64..18432) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum size of an I-frame that can be transmitted/received across the link between this dspuNode and the remote PU." DEFVAL { 1472 } ::= { dspuPuAdminEntry 10 } dspuPuAdminLinkRetryCount OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Number of times that the DSPU node will attempt to activate the link between the dspuNode and the remote PU." DEFVAL { 4 } ::= { dspuPuAdminEntry 11 } dspuPuAdminLinkRetryTimeout OBJECT-TYPE SYNTAX INTEGER(1..600) ACCESS read-write STATUS mandatory DESCRIPTION "Value (in seconds) for the delay between link activation attempts between the dspuNode and the remote PU." DEFVAL { 30 } ::= { dspuPuAdminEntry 12 } dspuPuAdminStartPu OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Attempt link activation with the remote PU. TRUE -> Attempt link activation with remote PU. FALSE -> Do not attempt link activation with remote PU." DEFVAL { false } ::= { dspuPuAdminEntry 13 } dspuPuAdminDlcType OBJECT-TYPE SYNTAX INTEGER { undefined(1), sdlc(2), ethernet(5), tokenRing(6), rsrb(8), framerelay(9), fddi(10), qllc(11) } ACCESS read-write STATUS mandatory DESCRIPTION "DLC type used by the dspuNode for link activation with the remote PU." ::= { dspuPuAdminEntry 14 } dspuPuAdminDlcUnit OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "DLC unit used by the dspuNode for link activation with the remote PU." ::= { dspuPuAdminEntry 15 } dspuPuAdminDlcPort OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "DLC port used by the dspuNode for link activation with the remote PU." ::= { dspuPuAdminEntry 16 } dspuPuAdminFocalPoint OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "PU serves as a focal point for alert forwarding. TRUE -> PU serves as focal point FALSE -> PU does not serve as focal point Only an upstream PU may be defined as a focal point. Downstream PUs can never be defined as a focal point; FocalPoint is always FALSE for downstream PUs. The DSPU node may define only one upstream PU as a focal point PU." DEFVAL { false } ::= { dspuPuAdminEntry 17 } dspuPuAdminRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Used by a Management Station to create or delete the row entry in the dspuPuAdminTable following the RowStatus textual convention. Upon successful creation of the row, an Agent automatically creates a corresponding entry in the dspuPuOperTable. The Management Station can set the value to 'destroy (6)' and the Agent will then delete the rows corresponding to this PU from the dspuPuAdminTable and dspuPuOperTable." ::= { dspuPuAdminEntry 18 } dspuPuAdminRemoteAddress OBJECT-TYPE SYNTAX DisplayString(SIZE(0..20)) -- Rsyntax OCTET STRING(SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "Poll address, DLCI, or subscriber address associated with the remote PU." ::= { dspuPuAdminEntry 19 } dspuPuOperTable OBJECT-TYPE SYNTAX SEQUENCE OF DspuPuOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table listing all active upstream/downstream PUs that are owned by the DSPU node (including default PUs). NOTE: In addition to the explicitly defined PUs from the dspuPuAdminTable, the dspuPuOperTable also includes default downstream PUs that may be dynamically created." ::= { dspuPu 2 } dspuPuOperEntry OBJECT-TYPE SYNTAX DspuPuOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents an active upstream/downstream PU." INDEX { dspuPuOperIndex } ::= { dspuPuOperTable 1 } DspuPuOperEntry ::= SEQUENCE { dspuPuOperIndex Integer32(0..2147483647), dspuPuOperName DisplayString, dspuPuOperType INTEGER, dspuPuOperRemoteMacAddress MacAddress, dspuPuOperRemoteSapAddress INTEGER, dspuPuOperLocalSapAddress INTEGER, dspuPuOperXid Integer32, dspuPuOperXidFmt INTEGER, dspuPuOperWindowSize INTEGER, dspuPuOperMaxIframe INTEGER, dspuPuOperLinkRetryCount INTEGER, dspuPuOperLinkRetryTimeout INTEGER, dspuPuOperStartPu TruthValue, dspuPuOperDlcType INTEGER, dspuPuOperDlcUnit INTEGER, dspuPuOperDlcPort INTEGER, dspuPuOperFocalPoint TruthValue, dspuPuOperState INTEGER, dspuPuOperFsmState INTEGER, dspuPuOperStartTime TimeStamp, dspuPuOperLastStateChgTime TimeStamp, dspuPuOperRemoteAddress DisplayString } dspuPuOperIndex OBJECT-TYPE SYNTAX Integer32(0..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Index of the PU entry in dspuPuOperTable." ::= { dspuPuOperEntry 1 } dspuPuOperName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..8)) -- Rsyntax OCTET STRING(SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Name of the PU." ::= { dspuPuOperEntry 2 } dspuPuOperType OBJECT-TYPE SYNTAX INTEGER { upstreamPu(1), dnstreamPu(2) } ACCESS read-only STATUS mandatory DESCRIPTION "PU type is either upstream or downstream." ::= { dspuPuOperEntry 3 } dspuPuOperRemoteMacAddress OBJECT-TYPE SYNTAX MacAddress -- Rsyntax OCTET STRING(SIZE(6)) ACCESS read-only STATUS mandatory DESCRIPTION "MAC address of the remote PU." ::= { dspuPuOperEntry 4 } dspuPuOperRemoteSapAddress OBJECT-TYPE SYNTAX INTEGER(1..254) ACCESS read-only STATUS mandatory DESCRIPTION "SAP address of the remote PU." DEFVAL { 4 } ::= { dspuPuOperEntry 5 } dspuPuOperLocalSapAddress OBJECT-TYPE SYNTAX INTEGER(1..254) ACCESS read-only STATUS mandatory DESCRIPTION "SAP address of the local PU." DEFVAL { 8 } ::= { dspuPuOperEntry 6 } dspuPuOperXid OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "Upstream PU : XID that was sent to the remote PU. Dnstream PU : XID that was received from the remote PU." ::= { dspuPuOperEntry 7 } dspuPuOperXidFmt OBJECT-TYPE SYNTAX INTEGER { formatUnknown(1), format0(2), format3(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of XID format used during activation of the link between this dspuNode and the remote PU." ::= { dspuPuOperEntry 8 } dspuPuOperWindowSize OBJECT-TYPE SYNTAX INTEGER(1..127) ACCESS read-only STATUS mandatory DESCRIPTION "Send/Receive window size to be used across the link between this dspuNode and the remote PU." DEFVAL { 7 } ::= { dspuPuOperEntry 9 } dspuPuOperMaxIframe OBJECT-TYPE SYNTAX INTEGER(64..18432) ACCESS read-only STATUS mandatory DESCRIPTION "Maximum size of an I-frame that can be transmitted/received across the link between this dspuNode and the remote PU." DEFVAL { 1472 } ::= { dspuPuOperEntry 10 } dspuPuOperLinkRetryCount OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Number of times that the DSPU node will attempt to activate the link between the dspuNode and the remote PU." DEFVAL { 4 } ::= { dspuPuOperEntry 11 } dspuPuOperLinkRetryTimeout OBJECT-TYPE SYNTAX INTEGER(1..600) ACCESS read-only STATUS mandatory DESCRIPTION "Value (in seconds) for the delay between link activation attempts between the dspuNode and the remote PU." DEFVAL { 30 } ::= { dspuPuOperEntry 12 } dspuPuOperStartPu OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Attempt link activation with the remote PU. TRUE -> Attempt link activation with remote PU. FALSE -> Do not attempt link activation with remote PU." DEFVAL { false } ::= { dspuPuOperEntry 13 } dspuPuOperDlcType OBJECT-TYPE SYNTAX INTEGER { undefined(1), sdlc(2), ethernet(5), tokenRing(6), rsrb(8), framerelay(9), fddi(10), qllc(11) } ACCESS read-only STATUS mandatory DESCRIPTION "DLC type used by the dspuNode for link activation with the remote PU." ::= { dspuPuOperEntry 14 } dspuPuOperDlcUnit OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "DLC unit used by the dspuNode for link activation with the remote PU." ::= { dspuPuOperEntry 15 } dspuPuOperDlcPort OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "DLC port used by the dspuNode for link activation with the remote PU." ::= { dspuPuOperEntry 16 } dspuPuOperFocalPoint OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "PU serves as a focal point for alert forwarding. TRUE -> PU serves as focal point FALSE -> PU does not serve as focal point Only an upstream PU may be defined as a focal point. Downstream PUs can never be defined as a focal point; FocalPoint is always FALSE for downstream PUs. The DSPU node may define only one upstream PU as a focal point PU." DEFVAL { false } ::= { dspuPuOperEntry 17 } dspuPuOperState OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Operational state of PU is either active or inactive." ::= { dspuPuOperEntry 18 } dspuPuOperFsmState OBJECT-TYPE SYNTAX INTEGER { linkReset(1), linkPendConnOut(2), linkPendConnIn(3), linkPendXid(4), linkXidNeg(5), linkConnOut(6), linkConnIn(7), linkConnected(8), puPendAct(9), puActive(10), puBusy(11), puPendInact(12), linkPendDisc(13), linkPendClose(14) } ACCESS read-only STATUS mandatory DESCRIPTION "Current FSM state of the PU as follows: linkReset - Link is in reset state - not connected linkPendConnOut - Pending ConnectOut to establish link linkPendConnIn - Pending ConnectIn to establish link linkPendXid - Pending XID negotiation on the link linkXidNeg - XID negotiation proceeding on link linkConnOut - ConnectOut link activation linkConnIn - ConnectIn link activation linkConnected - Link connected, PU inactive puPendAct - Link connected, PU pending activation puActive - Link connected, PU active puBusy - Link connected, PU busy puPendInact - Link connected, PU pending deactivation linkPendDisc - Pending disconnect of link linkPendClose - Pending close of link station" ::= { dspuPuOperEntry 19 } dspuPuOperStartTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Timestamp of PU activation (when ACTPU +rsp received)." ::= { dspuPuOperEntry 20 } dspuPuOperLastStateChgTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "TimeStamp of last PU state change between active<->inactive." ::= { dspuPuOperEntry 21 } dspuPuOperRemoteAddress OBJECT-TYPE SYNTAX DisplayString(SIZE(0..20)) -- Rsyntax OCTET STRING(SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "Poll address, DLCI, or subscriber address associated with the remote PU." ::= { dspuPuOperEntry 22 } dspuPuStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DspuPuStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table listing the statistics recorded for each PU." ::= { dspuPu 3 } dspuPuStatsEntry OBJECT-TYPE SYNTAX DspuPuStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents an active upstream/downstream PU and has a corresponding entry in the dspuPuOperTable." INDEX { dspuPuOperIndex } ::= { dspuPuStatsTable 1 } DspuPuStatsEntry ::= SEQUENCE { dspuPuStatsSentBytes Counter32, dspuPuStatsRcvdBytes Counter32, dspuPuStatsSentFrames Counter32, dspuPuStatsRcvdFrames Counter32, dspuPuStatsSentNegativeRsps Counter32, dspuPuStatsRcvdNegativeRsps Counter32, dspuPuStatsActiveLus Counter32, dspuPuStatsInactiveLus Counter32, dspuPuStatsBindLus Counter32, dspuPuStatsActivationFailures Counter32, dspuPuStatsLastActivationFailureReason INTEGER } dspuPuStatsSentBytes OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of bytes sent by this PU." ::= { dspuPuStatsEntry 1 } dspuPuStatsRcvdBytes OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of bytes received by this PU." ::= { dspuPuStatsEntry 2 } dspuPuStatsSentFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of frames sent by this PU." ::= { dspuPuStatsEntry 3 } dspuPuStatsRcvdFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of frames received by this PU." ::= { dspuPuStatsEntry 4 } dspuPuStatsSentNegativeRsps OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of negative responses sent by this PU." ::= { dspuPuStatsEntry 5 } dspuPuStatsRcvdNegativeRsps OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of negative responses received by this PU." ::= { dspuPuStatsEntry 6 } dspuPuStatsActiveLus OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of active LUs on this PU (LU becomes active when ACTLU +rsp received)." ::= { dspuPuStatsEntry 7 } dspuPuStatsInactiveLus OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of inactive LUs on this PU (LU is inactive until ACTLU rq or ACTLU +rsp received)." ::= { dspuPuStatsEntry 8 } dspuPuStatsBindLus OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of LUs on this PU which are active-in-session. (LU is active-in-session when BIND rq received)" ::= { dspuPuStatsEntry 9 } dspuPuStatsActivationFailures OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of activation failures for this PU." ::= { dspuPuStatsEntry 10 } dspuPuStatsLastActivationFailureReason OBJECT-TYPE SYNTAX INTEGER { noError(1), otherError(2), internalError(3), configurationError(4), puNegativeResponse(5), puAlreadyActive(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Reason for last activation failure of this PU as follows: noError - No PU activation failure has been detected otherError - Undefined error detected during PU activation internalError - Internal resources error detected during PU activation configurationError - PU configuration error - PU could not be activated puNegativeResponse - Negative ACTPU response received from remote PU puAlreadyActive - PU is already active" ::= { dspuPuStatsEntry 11 } dspuLuAdminTable OBJECT-TYPE SYNTAX SEQUENCE OF DspuLuAdminEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table listing all LUs owned by the PU. NOTE: The dspuLuAdminTable does not include LUs owned by default downstream PUs that may be dynamically created." ::= { dspuLu 1 } dspuLuAdminEntry OBJECT-TYPE SYNTAX DspuLuAdminEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a defined LU owned by the PU." INDEX { dspuPuAdminIndex, dspuLuAdminLuLocalAddress } ::= { dspuLuAdminTable 1 } DspuLuAdminEntry ::= SEQUENCE { dspuLuAdminLuLocalAddress INTEGER, dspuLuAdminType INTEGER, dspuLuAdminPoolClassName DisplayString, dspuLuAdminPeerPuIndex Integer32, dspuLuAdminPeerLuLocalAddress INTEGER, dspuLuAdminRowStatus RowStatus } dspuLuAdminLuLocalAddress OBJECT-TYPE SYNTAX INTEGER(1..254) ACCESS not-accessible STATUS mandatory DESCRIPTION "NAU address of the local LU." ::= { dspuLuAdminEntry 1 } dspuLuAdminType OBJECT-TYPE SYNTAX INTEGER { pooled(1), dedicated(2) } ACCESS read-write STATUS mandatory DESCRIPTION "LU type is either pooled or dedicated." ::= { dspuLuAdminEntry 2 } dspuLuAdminPoolClassName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..10)) -- Rsyntax OCTET STRING(SIZE(0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Pool class to which the LU is defined as a member. The dspuLuAdminPoolClassName is valid for pooled LUs only." ::= { dspuLuAdminEntry 3 } dspuLuAdminPeerPuIndex OBJECT-TYPE SYNTAX Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "For downstream LUs, the PeerPuIndex identifies the upstream PU that owns the upstream LU to which this downstream LU is assigned. For upstream LUs, the PeerPuIndex identifies the downstream PU that owns the downstream LU to which this upstream LU is assigned. The PeerPuIndex is valid for dedicated LUs only; otherwise, the PeerPuIndex is zero." ::= { dspuLuAdminEntry 4 } dspuLuAdminPeerLuLocalAddress OBJECT-TYPE SYNTAX INTEGER(1..254) ACCESS read-write STATUS mandatory DESCRIPTION "For downstream LUs, the PeerLuLocalAddress identifies the NAU address of the upstream LU to which this downstream LU is assigned. For upstream LUs, the PeerLuLocalAddress identifies the NAU address of the downstream LU to which this upstream LU is assigned. The PeerLuLocalAddress is valid for dedicated LUs only; otherwise, the PeerLuLocalAddress is zero." ::= { dspuLuAdminEntry 5 } dspuLuAdminRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Used by a Management Station to create or delete the row entry in the dspuLuAdminTable following the RowStatus textual convention. Upon successful creation of the row, an Agent automatically creates a corresponding entry in the dspuLuOperTable. The Management Station can set the value to 'destroy (6)' and the Agent will then delete the rows corresponding to this LU from the dspuLuAdminTable and the dspuLuOperTable." ::= { dspuLuAdminEntry 6 } dspuLuOperTable OBJECT-TYPE SYNTAX SEQUENCE OF DspuLuOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table listing all LUs owned by the PU. NOTE: In addition to the LUs owned by explicitly defined PUs from the dspuLuAdminTable, the dspuLuOperTable also includes the LUs owned by default downstream PUs that may be dynamically created." ::= { dspuLu 2 } dspuLuOperEntry OBJECT-TYPE SYNTAX DspuLuOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a defined LU owned by the PU." INDEX { dspuPuOperIndex, dspuLuOperLuLocalAddress } ::= { dspuLuOperTable 1 } DspuLuOperEntry ::= SEQUENCE { dspuLuOperLuLocalAddress INTEGER, dspuLuOperType INTEGER, dspuLuOperPoolClassName DisplayString, dspuLuOperPeerPuIndex Integer32, dspuLuOperPeerLuLocalAddress INTEGER, dspuLuOperState INTEGER, dspuLuOperFsmState INTEGER, dspuLuOperSessionState INTEGER, dspuLuOperLastActivationFailureReason INTEGER } dspuLuOperLuLocalAddress OBJECT-TYPE SYNTAX INTEGER(1..254) ACCESS not-accessible STATUS mandatory DESCRIPTION "NAU address of the local LU." ::= { dspuLuOperEntry 1 } dspuLuOperType OBJECT-TYPE SYNTAX INTEGER { pooled(1), dedicated(2) } ACCESS read-only STATUS mandatory DESCRIPTION "LU type is either pooled or dedicated." ::= { dspuLuOperEntry 2 } dspuLuOperPoolClassName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..10)) -- Rsyntax OCTET STRING(SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Pool class to which the LU is defined as a member. The dspuLuOperPoolClassName is valid for pooled LUs only." ::= { dspuLuOperEntry 3 } dspuLuOperPeerPuIndex OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "For downstream LUs, the PeerPuIndex identifies the upstream PU that owns the upstream LU to which this downstream LU is assigned. For upstream LUs, the PeerPuIndex identifies the downstream PU that owns the downstream LU to which this upstream LU is assigned. If PeerPuIndex is zero, the LU is a pooled LU and has not been assigned a peer LU from the pool." ::= { dspuLuOperEntry 4 } dspuLuOperPeerLuLocalAddress OBJECT-TYPE SYNTAX INTEGER(0..254) ACCESS read-only STATUS mandatory DESCRIPTION "For downstream LUs, the PeerLuLocalAddress identifies the NAU address of the upstream LU to which this downstream LU is assigned. For upstream LUs, the PeerLuLocalAddress identifies the NAU address of the downstream LU to which this upstream LU is assigned. If the PeerLuLocalAddress is zero, the LU is a pooled LU and has not been assigned a peer LU from the pool." ::= { dspuLuOperEntry 5 } dspuLuOperState OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Operational state of LU is either active or inactive." ::= { dspuLuOperEntry 6 } dspuLuOperFsmState OBJECT-TYPE SYNTAX INTEGER { reset(1), dnLuStarted(2), upLuActive(3), dnLuPendAct(4), dnLuActUnav(5), upLuPendAvail(6), bothAvail(7), dnLuPendInact(8), upLuPendInact(9), luInactivityTimeout(10), dnInactivityPendInact(11) } ACCESS read-only STATUS mandatory DESCRIPTION "Current FSM state of the LU as follows: reset - neither dnLu or upLu active dnLuStarted - dnLu active, upLu inactive upLuActive - upLu active, dnLu inactive dnLuPendAct - dnLu pending activation, upLu active-unavailable dnLuActUnav - dnLu active-unavailable, upLu active-available upLuPendAvail - upLu pending-available bothAvail - both upLu and dnLu active-available dnLuPendInact - dnLu pending inactive upLuPendInact - upLu pending inactive luInactivityTimeout - inactivity Timeout on LU-to-LU session dnInactivityPendInact - dnLu pending inactive from inactivity timeout" ::= { dspuLuOperEntry 7 } dspuLuOperSessionState OBJECT-TYPE SYNTAX INTEGER { bound(1), unbound(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Operational state of LU session is either bound or unbound." ::= { dspuLuOperEntry 8 } dspuLuOperLastActivationFailureReason OBJECT-TYPE SYNTAX INTEGER { noError(1), otherError(2), luNegativeResponse(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Reason for last activation failure of this PU as follows: noError - No LU activation failure has been detected otherError - Undefined error detected during LU activation luNegativeResponse - Negative ACTLU response received from remote LU" ::= { dspuLuOperEntry 9 } dspuSapTable OBJECT-TYPE SYNTAX SEQUENCE OF DspuSapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table listing the SAPs that are enabled for the DSPU node." ::= { dspuSap 1 } dspuSapEntry OBJECT-TYPE SYNTAX DspuSapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents an enabled SAP for the DSPU node." INDEX { dspuSapDlcType, dspuSapDlcUnit, dspuSapDlcPort, dspuSapAddress } ::= { dspuSapTable 1 } DspuSapEntry ::= SEQUENCE { dspuSapAddress INTEGER, dspuSapType INTEGER, dspuSapDlcType INTEGER, dspuSapDlcUnit INTEGER, dspuSapDlcPort INTEGER, dspuSapOperState INTEGER, dspuSapRowStatus RowStatus } dspuSapAddress OBJECT-TYPE SYNTAX INTEGER(1..254) ACCESS not-accessible STATUS mandatory DESCRIPTION "SAP address of the local SAP." ::= { dspuSapEntry 1 } dspuSapType OBJECT-TYPE SYNTAX INTEGER { upstreamSap(1), dnstreamSap(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Local SAP type is either upstreamSap or downstreamSap." ::= { dspuSapEntry 2 } dspuSapDlcType OBJECT-TYPE SYNTAX INTEGER { undefined(1), sdlc(2), ethernet(5), tokenRing(6), rsrb(8), framerelay(9), fddi(10), qllc(11) } ACCESS not-accessible STATUS mandatory DESCRIPTION "DLC type of the adapter that owns the local SAP." ::= { dspuSapEntry 3 } dspuSapDlcUnit OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "DLC unit of the adapter that owns the local SAP." ::= { dspuSapEntry 4 } dspuSapDlcPort OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "DLC port of the adapter that owns the local SAP." ::= { dspuSapEntry 5 } dspuSapOperState OBJECT-TYPE SYNTAX INTEGER { sapClosed(1), sapOpening(2), sapOpened(3), sapClosing(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Operational state of the local SAP as follows: - sapClosed - sapOpening - sapOpened - sapClosing" ::= { dspuSapEntry 6 } dspuSapRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used by a Management Station to create or delete the row entry in the dspuSapTable following the RowStatus textual convention. The Management Station can set the value to 'destroy (6)' and the Agent will then delete the rows corresponding to this SAP from the dspuSapTable. The local SAP address is enabled on the specified adapter when a row entry in the dspuSapTable is created." ::= { dspuSapEntry 7 } -- dspuPuStateChangeTrap TRAP-TYPE --?? Non-reverse mappable trap -- ENTERPRISE dspuPuTraps -- VARIABLES { -- dspuPuOperName, dspuPuOperState } -- Status -- obsolete -- DESCRIPTION -- "Generated when the operational state -- of the PU changes between active<- ->inactive. -- -- The following information is returned: -- dspuPuOperName -> PU name -- dspuPuOperState -> Current operational state of the PU" -- ::= 1 -- dspuPuActivationFailureTrap TRAP-TYPE --?? Non-reverse mappable trap -- ENTERPRISE dspuPuTraps -- VARIABLES { -- dspuPuOperName, dspuPuOperState, -- dspuPuStatsLastActivationFailureReason } -- Status -- obsolete -- DESCRIPTION -- "Generated whenever a PU activation failure is detected. -- -- The following information is returned: -- dspuPuOperName -- -> PU name -- dspuPuOperState -- -> Current operational state of the PU -- dspuPuStatsLastActivationFailureReason -- -> Reason for PU activation failure" -- ::= 2 newdspuPuStateChangeTrap TRAP-TYPE -- Reverse mappable trap ENTERPRISE dspuPuTraps VARIABLES { dspuPuOperName, dspuPuOperState } -- Status -- mandatory DESCRIPTION "Generated when the operational state of the PU changes between active<-->inactive. The following information is returned: dspuPuOperName -> PU name dspuPuOperState -> Current operational state of the PU" ::= 1 newdspuPuActivationFailureTrap TRAP-TYPE -- Reverse mappable trap ENTERPRISE dspuPuTraps VARIABLES { dspuPuOperName, dspuPuOperState, dspuPuStatsLastActivationFailureReason } -- Status -- mandatory DESCRIPTION "Generated whenever a PU activation failure is detected. The following information is returned: dspuPuOperName -> PU name dspuPuOperState -> Current operational state of the PU dspuPuStatsLastActivationFailureReason -> Reason for PU activation failure" ::= 2 -- dspuLuStateChangeTrap TRAP-TYPE --?? Non-reverse mappable trap -- ENTERPRISE dspuLuTraps -- VARIABLES { -- dspuPuOperName, dspuLuOperLuLocalAddress, dspuLuOperState } -- Status -- obsolete -- DESCRIPTION -- "Generated when the operational state -- of the PU changes between active<- ->inactive. -- -- The following information is returned: -- dspuPuOperName -- -> PU name -- dspuLuOperLuLocalAddress -- -> NAU address of LU -- dspuLuOperState -- -> Current operational state of the LU" -- ::= 1 newdspuLuStateChangeTrap TRAP-TYPE -- Reverse mappable trap ENTERPRISE dspuLuTraps VARIABLES { dspuPuOperName, dspuLuOperState } -- Status -- mandatory DESCRIPTION "Generated when the operational state of the LU changes between active<-->inactive. The following information is returned: dspuPuOperName -> PU name dspuLuOperState -> Current operational state of the LU" ::= 1 dspuLuActivationFailureTrap TRAP-TYPE -- Reverse mappable trap ENTERPRISE dspuLuTraps VARIABLES { dspuPuOperName, dspuLuOperState, dspuLuOperLastActivationFailureReason } -- Status -- mandatory DESCRIPTION "Generated whenever an LU activation failure is detected. The following information is returned: dspuPuOperName -> PU name dspuLuOperState -> Current operational state of the LU dspuLuOperLastActivationFailureReason -> Reason for LU activation failure" ::= 2 dspuSapStateChangeTrap TRAP-TYPE --?? Non-reverse mappable trap ENTERPRISE dspuSapTraps VARIABLES { dspuSapDlcType, dspuSapDlcUnit, dspuSapDlcPort, dspuSapAddress, dspuSapOperState } -- Status -- obsolete DESCRIPTION "Generated when the operational state of the SAP changes between 'open' or 'closed'. The following information is returned: dspuSapOperDlcType -> DLC type of the adapter on which SAP is located dspuSapOperDlcUnit -> Unit ID of the adapter on which SAP is located dspuSapOperDlcPort -> Port ID of the adapter on which SAP is located dspuSapOperAddress -> SAP address dspuSapOperState -> Current operational state of the SAP" ::= 1 dspuNodeGroup OBJECT IDENTIFIER ::= { ciscoDspuMIBGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Global DSPU node information -- objects -- dspuNodeRsrb, dspuNodeRsrbLocalVirtualRing, -- dspuNodeRsrbBridgeNumber, dspuNodeRsrbTargetVirtualRing, -- dspuNodeRsrbVirtualMacAddress, dspuNodeDefaultPu, -- dspuNodeDefaultPuWindowSize, dspuNodeDefaultPuMaxIframe, -- dspuNodeActivationWindow, dspuNodeLastConfigChgTime dspuPoolClassGroup OBJECT IDENTIFIER ::= { ciscoDspuMIBGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- LU pool class information -- objects -- dspuPoolClassName, dspuPoolClassInactivityTimeout, -- dspuPoolClassOperUpStreamLuDefs, -- dspuPoolClassOperDnStreamLuDefs dspuPooledLuGroup OBJECT IDENTIFIER ::= { ciscoDspuMIBGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Pooled LU information -- objects -- dspuPooledLuPeerPuIndex, dspuPooledLuPeerLuLocalAddress dspuPuGroup OBJECT IDENTIFIER ::= { ciscoDspuMIBGroups 4 } -- OBJECT-GROUP -- Status -- obsolete -- Descr -- Upstream/Downstream PU node information -- objects -- dspuPuAdminName, dspuPuAdminType, dspuPuAdminRemoteMacAddress, -- dspuPuAdminRemoteSapAddress, dspuPuAdminLocalSapAddress, -- dspuPuAdminXid, dspuPuAdminXidFmt, dspuPuAdminWindowSize, -- dspuPuAdminMaxIframe, dspuPuAdminLinkRetryCount, -- dspuPuAdminLinkRetryTimeout, dspuPuAdminStartPu, -- dspuPuAdminDlcType, dspuPuAdminDlcUnit, dspuPuAdminDlcPort, -- dspuPuAdminFocalPoint, dspuPuAdminRowStatus, dspuPuOperName, -- dspuPuOperType, dspuPuOperRemoteMacAddress, -- dspuPuOperRemoteSapAddress, dspuPuOperLocalSapAddress, -- dspuPuOperXid, dspuPuOperXidFmt, dspuPuOperWindowSize, -- dspuPuOperMaxIframe, dspuPuOperLinkRetryCount, -- dspuPuOperLinkRetryTimeout, dspuPuOperStartPu, -- dspuPuOperDlcType, dspuPuOperDlcUnit, dspuPuOperDlcPort, -- dspuPuOperFocalPoint, dspuPuOperState, dspuPuOperFsmState, -- dspuPuOperStartTime, dspuPuOperLastStateChgTime, -- dspuPuStatsSentBytes, dspuPuStatsRcvdBytes, -- dspuPuStatsSentFrames, dspuPuStatsRcvdFrames, -- dspuPuStatsSentNegativeRsps, dspuPuStatsRcvdNegativeRsps, -- dspuPuStatsActiveLus, dspuPuStatsInactiveLus, -- dspuPuStatsBindLus, dspuPuStatsActivationFailures, -- dspuPuStatsLastActivationFailureReason dspuLuGroup OBJECT IDENTIFIER ::= { ciscoDspuMIBGroups 5 } -- OBJECT-GROUP -- Status -- obsolete -- Descr -- Upstream/Downstream LU information -- objects -- dspuLuAdminType, dspuLuAdminPoolClassName, -- dspuLuAdminPeerPuIndex, dspuLuAdminPeerLuLocalAddress, -- dspuLuAdminRowStatus, dspuLuOperType, dspuLuOperPoolClassName, -- dspuLuOperPeerPuIndex, dspuLuOperPeerLuLocalAddress, -- dspuLuOperState, dspuLuOperFsmState, dspuLuOperSessionState dspuSapGroup OBJECT IDENTIFIER ::= { ciscoDspuMIBGroups 6 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Local SAP information -- objects -- dspuSapType, dspuSapOperState, dspuSapRowStatus dspuPuGroupV11R01 OBJECT IDENTIFIER ::= { ciscoDspuMIBGroups 7 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Upstream/Downstream PU node information -- objects -- dspuPuAdminName, dspuPuAdminType, dspuPuAdminRemoteMacAddress, -- dspuPuAdminRemoteSapAddress, dspuPuAdminLocalSapAddress, -- dspuPuAdminXid, dspuPuAdminXidFmt, dspuPuAdminWindowSize, -- dspuPuAdminMaxIframe, dspuPuAdminLinkRetryCount, -- dspuPuAdminLinkRetryTimeout, dspuPuAdminStartPu, -- dspuPuAdminDlcType, dspuPuAdminDlcUnit, dspuPuAdminDlcPort, -- dspuPuAdminFocalPoint, dspuPuAdminRowStatus, -- dspuPuAdminRemoteAddress, dspuPuOperName, dspuPuOperType, -- dspuPuOperRemoteMacAddress, dspuPuOperRemoteSapAddress, -- dspuPuOperLocalSapAddress, dspuPuOperXid, dspuPuOperXidFmt, -- dspuPuOperWindowSize, dspuPuOperMaxIframe, -- dspuPuOperLinkRetryCount, dspuPuOperLinkRetryTimeout, -- dspuPuOperStartPu, dspuPuOperDlcType, dspuPuOperDlcUnit, -- dspuPuOperDlcPort, dspuPuOperFocalPoint, dspuPuOperState, -- dspuPuOperFsmState, dspuPuOperStartTime, -- dspuPuOperLastStateChgTime, dspuPuOperRemoteAddress, -- dspuPuStatsSentBytes, dspuPuStatsRcvdBytes, -- dspuPuStatsSentFrames, dspuPuStatsRcvdFrames, -- dspuPuStatsSentNegativeRsps, dspuPuStatsRcvdNegativeRsps, -- dspuPuStatsActiveLus, dspuPuStatsInactiveLus, -- dspuPuStatsBindLus, dspuPuStatsActivationFailures, -- dspuPuStatsLastActivationFailureReason dspuLuGroupV11R01 OBJECT IDENTIFIER ::= { ciscoDspuMIBGroups 8 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Upstream/Downstream LU information -- objects -- dspuLuAdminType, dspuLuAdminPoolClassName, -- dspuLuAdminPeerPuIndex, dspuLuAdminPeerLuLocalAddress, -- dspuLuAdminRowStatus, dspuLuOperType, dspuLuOperPoolClassName, -- dspuLuOperPeerPuIndex, dspuLuOperPeerLuLocalAddress, -- dspuLuOperState, dspuLuOperFsmState, dspuLuOperSessionState, -- dspuLuOperLastActivationFailureReason ciscoDspuMIBCompliance OBJECT IDENTIFIER ::= { ciscoDspuMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- obsolete -- Descr -- The compliance statement for the SNMPv2 entities -- which implement the Cisco DSPU MIB. -- Module -- >>current<< -- MandGroup -- dspuNodeGroup -- MandGroup -- dspuPoolClassGroup -- MandGroup -- dspuPooledLuGroup -- MandGroup -- dspuPuGroup -- MandGroup -- dspuLuGroup -- MandGroup -- dspuSapGroup ciscoDspuMIBComplianceV11R01 OBJECT IDENTIFIER ::= { ciscoDspuMIBCompliances 2 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for the SNMPv2 entities -- which implement the Cisco DSPU MIB. -- Module -- >>current<< -- MandGroup -- dspuNodeGroup -- MandGroup -- dspuPoolClassGroup -- MandGroup -- dspuPooledLuGroup -- MandGroup -- dspuPuGroupV11R01 -- MandGroup -- dspuLuGroupV11R01 -- MandGroup -- dspuSapGroup END