-- MIB file created 25-Apr-2016 11:49:19, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com CISCO-ENTITY-DIAG-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-ENTITY-DIAG-MIB.my" -- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T" IMPORTS entPhysicalIndex, PhysicalIndex, entPhysicalDescr FROM ENTITY-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB DateAndTime, TruthValue, RowStatus FROM SNMPv2-TC-v1 EntPhysicalIndexOrZero FROM CISCO-TC CeDiagDiagnosticLevel, CeDiagDiagnosticMethod, CeDiagTestIdentifier, CeDiagErrorIdentifier, CeDiagErrorIdentifierOrZero, CeDiagJobIdentifier, CeDiagPortList, CeDiagTestList, CeDiagJobSuite FROM CISCO-ENTITY-DIAG-TC-MIB ciscoMgmt FROM CISCO-SMI Counter, Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; ciscoEntityDiagMIB OBJECT IDENTIFIER ::= { ciscoMgmt 350 } -- MODULE-IDENTITY -- LastUpdated -- 201603110000Z -- OrgName -- Cisco Systems, Inc. -- ContactInfo -- Cisco Systems -- Customer Service -- -- Postal: 170 W Tasman Drive -- San Jose, CA 95134 -- -- Tel: +1 800 553-NETS -- -- E-mail: cs-snmp@cisco.com -- Descr -- This MIB module defines the managed objects that describe the -- online diagnostics capabilities supported by the -- physical entities contained by the system, including chassis, -- modules, ports, power supplies, fans, and sensors. In order to -- manage the online diagnostic capabilities supported by -- a physical entity, it must be represented by a conceptual row -- in the entPhysicalTable of the ENTITY-MIB (RFC-2737). -- -- GLOSSARY -- -- Boot-up Diagnostic - a diagnostic consisting of tests intended -- to be executed in a reasonable timeframe when a physical entity -- boots. -- -- Diagnostic - a suite of tests intended to exercise the -- functional integrity of a physical entity. -- -- Diagnostic Level - the degree of completeness that a diagnostic -- will exercise a physical entity. -- -- Field Diagnostic - a special suite of tests intended to -- exercise the functional integrity of a physical entity in a -- manner that is possible when a physical entity is -- operational or running an operational image. -- -- Field Diagnostic Image - an image supporting field diagnostics. -- A physical entity has to be loaded with a field diagnostic -- image before field diagnostics can be executed on the physical -- entity. -- -- Health Monitoring - the process of running special -- non-intrusive online tests periodically on a physical entity -- for the purpose of tracking the overall condition of a physical -- entity. -- -- On-Demand Diagnostic - a diagnostic intended to be executed -- immediately upon request. -- -- Offline Diagnostic - a diagnostic that consists of tests that -- are disruptive in nature, and thus requires the physical entity -- being evaluated to be taken offline for the duration. -- -- Online Diagnostic - a diagnostic that consists of tests that -- are not disruptive in nature, and thus can be done without -- taking the physical entity offline. -- -- Physical Entity - an identifiable physical resource, such as a -- chassis, line card, power supply, or communication port. See -- RFC-2737, 'Entity MIB (Version 2)', K. McCloghrie and A. -- Bierman. -- -- Scheduled Diagnostic - a diagnostic intended to execute at some -- time in the future. There exist two types of scheduled -- diagnostics: 1) one-shot, which execute only once; and 2) -- periodic, which executes at a specific interval. -- -- Test - an exercise intended to determine the functional -- integrity of a component comprising a physical entity (e.g., a -- port might support an internal loopback test). -- -- Diagnostic Job - Consists of a diagnostic suite -- (i.e., a collection of tests) to be executed by a physical -- entity. -- RevDate -- 201603110000Z -- RevDescr -- Added one new enumaration value disruptive(15) -- to ceDiagTestAttributes -- RevDate -- 201005260000Z -- RevDescr -- Added ceDiagHMTestThreshWindowGroup. -- RevDate -- 200906300000Z -- RevDescr -- Added ceDiagTestPerfLastTestMethodGroup. -- Updated Description of ceDiagTestPerfLastErrorID object. -- RevDate -- 200803120000Z -- RevDescr -- Added ceDiagNotifControlGroup, ceDiagNotifErrorMsgGroup -- and ceDiagNotificationGroup. -- RevDate -- 200701090000Z -- RevDescr -- Initial version of this MIB. ciscoEntityDiagMIBNotifs OBJECT IDENTIFIER ::= { ciscoEntityDiagMIB 0 } ciscoEntityDiagMIBObjects OBJECT IDENTIFIER ::= { ciscoEntityDiagMIB 1 } ciscoEntityDiagMIBConform OBJECT IDENTIFIER ::= { ciscoEntityDiagMIB 2 } ceDiagDescriptions OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBObjects 1 } ceDiagGlobalConfig OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBObjects 2 } ceDiagEntity OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBObjects 3 } ceDiagOnDemand OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBObjects 4 } ceDiagScheduled OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBObjects 5 } ceDiagTest OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBObjects 6 } ceDiagHealthMonitor OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBObjects 7 } ceDiagEvents OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBObjects 8 } ceDiagNotificationControl OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBObjects 9 } ciscoEntityDiagMIBCompliances OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBConform 1 } ciscoEntityDiagMIBGroups OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBConform 2 } ceDiagTestInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF CeDiagTestInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table describes the tests supported by each physical entity supporting online diagnostics. The table organizes tests into sets associated with the physical entity supporting those tests. The SNMP entity adds a set of tests corresponding to a physical entity upon detection of a physical entity supporting online diagnostics. The SNMP entity deletes a set of tests corresponding to a physical entity upon removal of the physical entity. The SNMP entity replaces a set of tests corresponding to a physical entity when the physical entity has been successfully loaded with a different image (e.g., the field diagnostic image)." ::= { ceDiagDescriptions 1 } ceDiagTestInfoEntry OBJECT-TYPE SYNTAX CeDiagTestInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The description of a single test supported by a corresponding physical entity." INDEX { entPhysicalIndex, ceDiagTestId } ::= { ceDiagTestInfoTable 1 } CeDiagTestInfoEntry ::= SEQUENCE { ceDiagTestId CeDiagTestIdentifier, ceDiagTestText SnmpAdminString, ceDiagTestAttributes OCTET STRING } ceDiagTestId OBJECT-TYPE SYNTAX CeDiagTestIdentifier -- Rsyntax Gauge(1..4294967295) ACCESS not-accessible STATUS mandatory DESCRIPTION "This object indicates an arbitrary positive integer arbitrarily identifying the test." ::= { ceDiagTestInfoEntry 1 } ceDiagTestText OBJECT-TYPE SYNTAX SnmpAdminString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates a human-readable description of the test. Examples include: 'Marching Pattern DRAM Test' 'Data Pins DRAM Test' 'Internal Loopback Test' 'External Loopback Test'" ::= { ceDiagTestInfoEntry 2 } ceDiagTestAttributes OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) -- BITS are: -- minimal(0) -- complete(1) -- perPort(2) -- fatal(3) -- basicOnDemand(4) -- standby(5) -- parallel(6) -- nonDisruptive(7) -- hmAlwaysEnable(8) -- hmFixedInterval(9) -- nonHM(10) -- proxy(11) -- activeToStandby(12) -- offline(13) -- perDevice(14) -- disruptive(15) ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates a set of attributes characterizing the test: 'minimal' - indicates that this test will be executed during boot-up if ceDiagBootupLevel is set to 'minimal' or 'complete'. This test is also included in the minimal or complete test suites. 'complete' - indicates that this test will be executed during boot-up if ceDiagBootupLevel is set to 'complete'. This test is also included in the complete test suites. 'perPort' - indicates that this test is a executed for each port contained by the module. This test is also included in the perPort test suites. 'fatal' - indicates that if this test fails, then the diagnostic should fail indicating that a major error occurred. 'basicOnDemand' - indicates that this test will be run during the basic on demand job is run. 'standby' - indicates that this test can only be run if the physical entity is a standby unit and can only be executed from the standby unit. 'parallel' - indicates that this test can be executed in parallel with other tests without checking for resource availability. 'nonDisruptive' - indicates this test can be executed without disrupting the physical entity's normal operation. This test is also included in the nonDisruptive test suites. 'hmAlwaysEnabled' - indicates that a management application can not disable the use of this test for the purpose of health monitoring. 'hmFixedInterval' - indicates that a management application can not change the interval at which health monitoring executes this test. 'nonHM' - indicates that this test can not be used for health monitoring. 'proxy' - indicates that the test must be executed through a proxy. 'activeToStandby' - indicates that this test can only be run if the physical entity is a standby unit and can only be executed from the active unit. 'offline' - indicates that this test will not get a user confirmation when it is run. 'perDevice' - indicates that this test is a per device test. 'disruptive' - indicates that this test can be executed with disrupting the physical entity's normal operation. This test is also included in the disruptive test suites." ::= { ceDiagTestInfoEntry 3 } ceDiagTestCustomAttributeTable OBJECT-TYPE SYNTAX SEQUENCE OF CeDiagTestCustomAttributeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table describes the additional custom based attributes of the tests listed in ceDiagTestInfoTable. These are attributes which have been customized by the platform supporting the tests." ::= { ceDiagDescriptions 2 } ceDiagTestCustomAttributeEntry OBJECT-TYPE SYNTAX CeDiagTestCustomAttributeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The description of a single custom based attribute for a test supported by a corresponding physical entity." INDEX { entPhysicalIndex, ceDiagTestId, ceDiagTestCustomAttributeIndex } ::= { ceDiagTestCustomAttributeTable 1 } CeDiagTestCustomAttributeEntry ::= SEQUENCE { ceDiagTestCustomAttributeIndex Gauge, ceDiagTestCustomAttributeDesc SnmpAdminString } ceDiagTestCustomAttributeIndex OBJECT-TYPE SYNTAX Gauge ACCESS not-accessible STATUS mandatory DESCRIPTION "An arbitrary integer which identifies the custom based attribute of a test." ::= { ceDiagTestCustomAttributeEntry 1 } ceDiagTestCustomAttributeDesc OBJECT-TYPE SYNTAX SnmpAdminString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This object provides a textual description of the custom based attribute of this test." ::= { ceDiagTestCustomAttributeEntry 2 } ceDiagErrorInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF CeDiagErrorInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table describes the errors indicated by a system supporting online diagnostics." ::= { ceDiagDescriptions 3 } ceDiagErrorInfoEntry OBJECT-TYPE SYNTAX CeDiagErrorInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The description of a single online error." INDEX { ceDiagErrorId } ::= { ceDiagErrorInfoTable 1 } CeDiagErrorInfoEntry ::= SEQUENCE { ceDiagErrorId CeDiagErrorIdentifier, ceDiagErrorText SnmpAdminString } ceDiagErrorId OBJECT-TYPE SYNTAX CeDiagErrorIdentifier -- Rsyntax Gauge(1..4294967295) ACCESS not-accessible STATUS mandatory DESCRIPTION "This object indicates an arbitrary positive integer arbitrarily identifying the error." ::= { ceDiagErrorInfoEntry 1 } ceDiagErrorText OBJECT-TYPE SYNTAX SnmpAdminString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates a human-readable description of the error. Examples include: 'DIAG_SUCCESS' 'DIAG_FAILURE' 'DIAG_NOT_SUPPORT' 'DIAG_SKIPPED'" ::= { ceDiagErrorInfoEntry 2 } ceDiagBootupLevel OBJECT-TYPE SYNTAX CeDiagDiagnosticLevel -- Rsyntax INTEGER { -- bypass(1), -- minimal(2), -- complete(3) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the level that physical entities will execute their boot-up diagnostic." DEFVAL { minimal } ::= { ceDiagGlobalConfig 1 } ceDiagEntityTable OBJECT-TYPE SYNTAX SEQUENCE OF CeDiagEntityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table supports online diagnostic control and status for each physical entity that supporting the feature. The SNMP entity adds a conceptual row to this table corresponding to a physical entity upon detection of a physical entity supporting online diagnostics. The SNMP entity deletes a conceptual row from this table corresponding to a physical entity upon removal of the physical entity." ::= { ceDiagEntity 1 } ceDiagEntityEntry OBJECT-TYPE SYNTAX CeDiagEntityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Online diagnostic control and status for a single physical entity supporting the feature. Observe that this data may not be accurate if the corresponding cefcModuleOperStatus (see the CISCO-ENTITY-FRU-CONTROL-MIB for further details) has a value of 'boot'." INDEX { entPhysicalIndex } ::= { ceDiagEntityTable 1 } CeDiagEntityEntry ::= SEQUENCE { ceDiagEntityBootLevel CeDiagDiagnosticLevel, ceDiagEntityImageAdminStatus INTEGER, ceDiagEntityImageOperStatus INTEGER, ceDiagEntityFieldDiagnosticUrl SnmpAdminString } ceDiagEntityBootLevel OBJECT-TYPE SYNTAX CeDiagDiagnosticLevel -- Rsyntax INTEGER { -- bypass(1), -- minimal(2), -- complete(3) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the level that the physical entity executed its boot-up diagnostic." ::= { ceDiagEntityEntry 1 } ceDiagEntityImageAdminStatus OBJECT-TYPE SYNTAX INTEGER { operational(1), fieldDiagnostic(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the desired image the physical entity should be running: 'operational' - the physical entity should be running the operational image. 'fieldDiagnostic' - the physical entity should be running the field diagnostic image." DEFVAL { operational } ::= { ceDiagEntityEntry 2 } ceDiagEntityImageOperStatus OBJECT-TYPE SYNTAX INTEGER { operational(1), fieldDiagnostic(2), booting(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the actual image the physical entity is running: 'operational' - the physical entity is running the operational image. 'fieldDiagnostic' - the physical entity is running the field diagnostic image. 'booting' - the physical entity is booting; that is, there is no way of determining what image the physical entity is running because it is currently booting." ::= { ceDiagEntityEntry 3 } ceDiagEntityFieldDiagnosticUrl OBJECT-TYPE SYNTAX SnmpAdminString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies a URL (see RFC-1630) that specifies the location of the field diagnostic image. The following list provides some examples of URLs for the field diagnostic: file://disk0:/images/fd001 Describes a file with the path '/images/fd001' on 'disk0:' accessed locally. ftp://pop-server/usr/bin/fd001 Describes a file with the path '/usr/bin/fd001' on the host 'pop-server' accessed via FTP. tftp://pop-server/tftpout/fd001 Describes a file with the path '/tftpout/fd001' on the host 'pop-server' accessed via TFTP." REFERENCE "RFC-1630, 'Universal Resource Identifiers in WWW', T. Berners-Lee." ::= { ceDiagEntityEntry 4 } ceDiagEntityCurrentTestTable OBJECT-TYPE SYNTAX SEQUENCE OF CeDiagEntityCurrentTestEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the information about the current test executing on a physical entity." ::= { ceDiagEntity 2 } ceDiagEntityCurrentTestEntry OBJECT-TYPE SYNTAX CeDiagEntityCurrentTestEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A test which is currently executing on a particular physical entity." INDEX { entPhysicalIndex, ceDiagTestId } ::= { ceDiagEntityCurrentTestTable 1 } CeDiagEntityCurrentTestEntry ::= SEQUENCE { ceDiagEntityCurrentTestMethod CeDiagDiagnosticMethod } ceDiagEntityCurrentTestMethod OBJECT-TYPE SYNTAX CeDiagDiagnosticMethod -- Rsyntax INTEGER { -- bootup(1), -- onDemand(2), -- scheduled(3), -- healthMonitor(4), -- none(5) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the method used to invoke the diagnostic that is executing this test." ::= { ceDiagEntityCurrentTestEntry 1 } ceDiagOnDemandErrorAllowed OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the number of errors the physical entities will allow before aborting an on demand diagnostic job. A value of '0' indicates that the an unlimited number of errors are allowed for the on demand diagnostic job." ::= { ceDiagOnDemand 1 } ceDiagOnDemandErrorAction OBJECT-TYPE SYNTAX INTEGER { continue(1), stop(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies how the physical entities in the system are to proceed when they encounter an error during an on demand diagnostic job. 'continue' - indicates that the physical entities will continue executing the on demand job. 'stop' - indicates that the physical entities will abort the on demand job." ::= { ceDiagOnDemand 2 } ceDiagOnDemandIterations OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the maximum number of iterations of an on demand job." ::= { ceDiagOnDemand 3 } ceDiagOnDemandJobTable OBJECT-TYPE SYNTAX SEQUENCE OF CeDiagOnDemandJobEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains a list of on demand jobs currently in the system. A row in this table can be created by setting the corresponding instance of ceDiagOnDemandJobRowStatus to 'createAndGo'. A row can be deleted by setting the corresponding instance of ceDiagOnDemandJobRowStatus to 'destroy'. Once the job is completed the corresponding row is deleted from the table. The individual results of the tests executed by this job are updated in ceDiagTestPerfTable." ::= { ceDiagOnDemand 4 } ceDiagOnDemandJobEntry OBJECT-TYPE SYNTAX CeDiagOnDemandJobEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A on demand job currently executing on a particular physical entity which supports on demand diagnostics." INDEX { entPhysicalIndex } ::= { ceDiagOnDemandJobTable 1 } CeDiagOnDemandJobEntry ::= SEQUENCE { ceDiagOnDemandJobSuite CeDiagJobSuite, ceDiagOnDemandJobTestList CeDiagTestList, ceDiagOnDemandJobPortList CeDiagPortList, ceDiagOnDemandJobRowStatus RowStatus } ceDiagOnDemandJobSuite OBJECT-TYPE SYNTAX CeDiagJobSuite -- Rsyntax INTEGER { -- none(1), -- complete(2), -- minimal(3), -- nonDisruptive(4), -- perPort(5) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates the various system predefined test suites the on demand job can choose from. If the value of this object is 'none', this job will run the tests specified by ceDiagOnDemandJobTestList. If the value of this object is 'complete', 'minimal', 'nonDisruptive' or 'perPort' the value of ceDiagOnDemandJobTestList is ignored." ::= { ceDiagOnDemandJobEntry 1 } ceDiagOnDemandJobTestList OBJECT-TYPE SYNTAX CeDiagTestList -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the user specified diagnostic suite (i.e., a set of tests) to be executed by the corresponding physical entity. The set of tests supported by this physical entity are specified in ceDiagTestInfoTable." ::= { ceDiagOnDemandJobEntry 2 } ceDiagOnDemandJobPortList OBJECT-TYPE SYNTAX CeDiagPortList -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the list of ports to be exercised by the corresponding physical entity when executing the diagnostic suite specified for the job." ::= { ceDiagOnDemandJobEntry 3 } ceDiagOnDemandJobRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The status object used to manage the rows in this table. When set to active(1) the on demand job is submitted. When set to destroy(6) the on demand job is stopped. When the value of this object is 'active', values within this row cannot be modified, except by deleting and re-creating the row." ::= { ceDiagOnDemandJobEntry 4 } ceDiagScheduledJobTable OBJECT-TYPE SYNTAX SEQUENCE OF CeDiagScheduledJobEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains a list of scheduled jobs on the system. A row in this table can be created by setting the corresponding instance of ceDiagScheduledJobRowStatus to 'createAndGo'. A row can be deleted by setting the corresponding instance of ceDiagScheduledJobRowStatus to 'destroy'. Once the job is completed the corresponding row is deleted from the table. The individual results of the tests executed by this job are updated in ceDiagTestPerfTable." ::= { ceDiagScheduled 1 } ceDiagScheduledJobEntry OBJECT-TYPE SYNTAX CeDiagScheduledJobEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A job currently scheduled on a particular physical entity." INDEX { entPhysicalIndex, ceDiagScheduledJobIndex } ::= { ceDiagScheduledJobTable 1 } CeDiagScheduledJobEntry ::= SEQUENCE { ceDiagScheduledJobIndex CeDiagJobIdentifier, ceDiagScheduledJobType INTEGER, ceDiagScheduledJobStart DateAndTime, ceDiagScheduledJobDayOfWeek INTEGER, ceDiagScheduledJobTestList CeDiagTestList, ceDiagScheduledJobPortList CeDiagPortList, ceDiagScheduledJobRowStatus RowStatus, ceDiagScheduledJobSuite CeDiagJobSuite } ceDiagScheduledJobIndex OBJECT-TYPE SYNTAX CeDiagJobIdentifier -- Rsyntax Gauge(1..4294967295) ACCESS not-accessible STATUS mandatory DESCRIPTION "An arbitrary non-zero integer value that uniquely identifies a single scheduled job with respect to a physical entity." ::= { ceDiagScheduledJobEntry 1 } ceDiagScheduledJobType OBJECT-TYPE SYNTAX INTEGER { scheduledOneShot(1), scheduledPeriodicDaily(2), scheduledPeriodicWeekly(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the type of the scheduled job. 'scheduledOneShot' - the physical entity will invoke this job at the time specified by ceDiagScheduledJobStart. 'scheduledPeriodicDaily' - the physical entity will first invoke this job at the time specified by ceDiagScheduledJobStart and continue invoking it daily at the same time. 'scheduledPeriodicWeekly' - the corresponding physical entity will first invoke this job at the time and day of the week specified by ceDiagScheduledJobStart and ceDiagScheduledJobDayOfWeek, and continue to invoke it weekly at the same time and day." ::= { ceDiagScheduledJobEntry 2 } ceDiagScheduledJobStart OBJECT-TYPE SYNTAX DateAndTime -- Rsyntax OCTET STRING(SIZE(8|11)) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies when a scheduled job will be executed. If the value of ceDiagScheduledJobType is 'scheduledOneShot', then this object only applies to the first execution of the job. If the value of ceDiagScheduledJobType is 'scheduledPeriodicDaily' or 'scheduledPeriodicWeekly', then the first four octets of this objects should be zero. If the physical entity's job queue already contains a job scheduled for execution at this time, then the process of submitting the job will fail." ::= { ceDiagScheduledJobEntry 3 } ceDiagScheduledJobDayOfWeek OBJECT-TYPE SYNTAX INTEGER { sunday(1), monday(2), tuesday(3), wednesday(4), thursday(5), friday(6), saturday(7), notApplicable(8) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the day of the week for a weekly periodic scheduled job. The value of of this object must be specified if the value of ceDiagScheduledJobType is 'scheduledPeriodicWeekly'. This value of this object is set to 'notApplicable' if the value of ceDiagScheduledJobType is 'scheduledOneShot' or 'scheduledPeriodicDaily'." ::= { ceDiagScheduledJobEntry 4 } ceDiagScheduledJobTestList OBJECT-TYPE SYNTAX CeDiagTestList -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the diagnostic suite (i.e., a set of tests) to be executed by the corresponding physical entity. The set of tests supported by this physical entity are specified in ceDiagTestInfoTable." ::= { ceDiagScheduledJobEntry 5 } ceDiagScheduledJobPortList OBJECT-TYPE SYNTAX CeDiagPortList -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the list of ports to be tested by the corresponding physical entity when executing the diagnostic suite specified for the job." ::= { ceDiagScheduledJobEntry 6 } ceDiagScheduledJobRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The status object used to manage the rows in this table. When set to 'active' the scheduled job is submitted. When set to destroy(6) the scheduled job is cleared. When the value of this object is 'active', values within this row cannot be modified, except by deleting and re-creating the row." ::= { ceDiagScheduledJobEntry 7 } ceDiagScheduledJobSuite OBJECT-TYPE SYNTAX CeDiagJobSuite -- Rsyntax INTEGER { -- none(1), -- complete(2), -- minimal(3), -- nonDisruptive(4), -- perPort(5) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates the various system predefined test suites the on scheduled job can choose from. If the value of this object is 'none', this job will run the tests specified by ceDiagScheduledJobTestList. If the value of this object is 'complete', 'minimal', 'nonDisruptive' or 'perPort' the value of ceDiagScheduledJobTestList is ignored." ::= { ceDiagScheduledJobEntry 8 } ceDiagTestPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF CeDiagTestPerfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains data concerning the performance of tests executed by each physical entity supporting the online diagnostic feature. The table organizes tests into sets associated with the physical entity supporting those tests. The SNMP entity adds a set of tests corresponding to a physical entity upon detection of a physical entity supporting online diagnostics. The SNMP entity deletes a set of tests corresponding to a physical entity upon removal of the physical entity. The SNMP entity replaces a set of tests corresponding to a physical entity when the physical entity has been successfully loaded with a different image (e.g., the field diagnostic image)." ::= { ceDiagTest 1 } ceDiagTestPerfEntry OBJECT-TYPE SYNTAX CeDiagTestPerfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Data concerning the performance of a single test." INDEX { entPhysicalIndex, ceDiagTestId } ::= { ceDiagTestPerfTable 1 } CeDiagTestPerfEntry ::= SEQUENCE { ceDiagTestPerfLastResult INTEGER, ceDiagTestPerfLastErrorID CeDiagErrorIdentifierOrZero, ceDiagTestPerfLastRun DateAndTime, ceDiagTestPerfFirstFail DateAndTime, ceDiagTestPerfLastSuccess DateAndTime, ceDiagTestPeffLastFail DateAndTime, ceDiagTestPerfTotalRuns Counter, ceDiagTestPerfTotalFails Counter, ceDiagTestPerfConsecutiveFails Gauge, ceDiagTestPerfLastTestMethod CeDiagDiagnosticMethod } ceDiagTestPerfLastResult OBJECT-TYPE SYNTAX INTEGER { unknown(1), fail(2), pass(3), skipped(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the result the last time this test was executed by the corresponding physical entity: 'unknown' - the corresponding physical entity has not executed the test. 'fail' - the test executed and detected at least one failure. 'pass' - the test executed without detecting a failure. 'skipped' - the test was skipped due to insufficient resources." ::= { ceDiagTestPerfEntry 1 } ceDiagTestPerfLastErrorID OBJECT-TYPE SYNTAX CeDiagErrorIdentifierOrZero -- Rsyntax Gauge(0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the last error code of this test. Details of the non-zero error code can be found in the corresponding entry in ceDiagErrorInfoTable." ::= { ceDiagTestPerfEntry 2 } ceDiagTestPerfLastRun OBJECT-TYPE SYNTAX DateAndTime -- Rsyntax OCTET STRING(SIZE(8|11)) ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the last time the corresponding physical entity executed this test. If the value of ceDiagTestPerfLastResult is 'unknown', then the value of this object is irrelevant." ::= { ceDiagTestPerfEntry 3 } ceDiagTestPerfFirstFail OBJECT-TYPE SYNTAX DateAndTime -- Rsyntax OCTET STRING(SIZE(8|11)) ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the first time the corresponding physical entity executed this test and it failed. The value of this object is irrelevant if the value of ceDiagTestPerfTotalFails is 0." ::= { ceDiagTestPerfEntry 4 } ceDiagTestPerfLastSuccess OBJECT-TYPE SYNTAX DateAndTime -- Rsyntax OCTET STRING(SIZE(8|11)) ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the last time the corresponding physical entity executed this test and it passed. The value 0x0000010100000000 indicates that the corresponding physical entity has not passed this test yet." ::= { ceDiagTestPerfEntry 5 } ceDiagTestPeffLastFail OBJECT-TYPE SYNTAX DateAndTime -- Rsyntax OCTET STRING(SIZE(8|11)) ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the last time the corresponding physical entity executed this test and it failed. If the value of ceDiagTestPerfTotalFails is 0, then the value of this object is irrelevant." ::= { ceDiagTestPerfEntry 6 } ceDiagTestPerfTotalRuns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the total number of times the corresponding physical entity has executed the test." ::= { ceDiagTestPerfEntry 7 } ceDiagTestPerfTotalFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the total number of times the corresponding physical entity has executed the test and the test resulted with a failure." ::= { ceDiagTestPerfEntry 8 } ceDiagTestPerfConsecutiveFails OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the consecutive number of times the corresponding physical entity has executed the test and it has failed. The value of this object will be reset to '0' when the physical entity executes the test and it succeeds." ::= { ceDiagTestPerfEntry 9 } ceDiagTestPerfLastTestMethod OBJECT-TYPE SYNTAX CeDiagDiagnosticMethod -- Rsyntax INTEGER { -- bootup(1), -- onDemand(2), -- scheduled(3), -- healthMonitor(4), -- none(5) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the testing method used for the last time this test was executed by the corresponding physical entity." ::= { ceDiagTestPerfEntry 10 } ceDiagHMSyslogEnabled OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the system will generate syslog messages due to the tests run by health monitor." ::= { ceDiagHealthMonitor 1 } ceDiagHMTestTable OBJECT-TYPE SYNTAX SEQUENCE OF CeDiagHMTestEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table describes attributes specific to the health monitor for tests supported by a physical entity." ::= { ceDiagHealthMonitor 2 } ceDiagHMTestEntry OBJECT-TYPE SYNTAX CeDiagHMTestEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The attributes of a single test specific to the health monitor." INDEX { entPhysicalIndex, ceDiagTestId } ::= { ceDiagHMTestTable 1 } CeDiagHMTestEntry ::= SEQUENCE { ceDiagHMTestEnabled TruthValue, ceDiagHMTestIntervalMin Gauge, ceDiagHMTestIntervalDefault Gauge, ceDiagHMTestInterval Gauge, ceDiagHMTestThresholdDefault Gauge, ceDiagHMTestThreshold Gauge, ceDiagHMTestThreshWindowSuite INTEGER, ceDiagHMTestThreshWindowSize Gauge } ceDiagHMTestEnabled OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether this test is enabled for health monitor." ::= { ceDiagHMTestEntry 1 } ceDiagHMTestIntervalMin OBJECT-TYPE SYNTAX Gauge(0..2147483647) -- Units -- milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the minimum interval which the health monitor can periodically invoke this test." ::= { ceDiagHMTestEntry 2 } ceDiagHMTestIntervalDefault OBJECT-TYPE SYNTAX Gauge(0..2147483647) -- Units -- milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the default interval which the health monitor will periodically invoke this test. A value of '0' indicates that the health monitor will not invoke the test." ::= { ceDiagHMTestEntry 3 } ceDiagHMTestInterval OBJECT-TYPE SYNTAX Gauge(0..2147483647) -- Units -- milliseconds ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the interval at which the health monitor periodically invokes this test. A value of '0' indicates that the health monitor will not invoke the test. A value of '0' cannot be set." ::= { ceDiagHMTestEntry 4 } ceDiagHMTestThresholdDefault OBJECT-TYPE SYNTAX Gauge(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the default consecutive failure count threshold. When the specified failure count threshold is reached, the diagnostic test result is set to failure. A value of '0' indicates that the health monitor will not invoke this test." ::= { ceDiagHMTestEntry 5 } ceDiagHMTestThreshold OBJECT-TYPE SYNTAX Gauge(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the consecutive failure count threshold for this test. When the specified failure count threshold is reached, the diagnostic test result is set to failure. A value of '0' indicates that there is no failure count threshold for this test. This object is used in combination with ceDiagHMTestThreshWindowSuite and ceDiagHMTestThreshWindowSize to specify a sliding history window for which the threshold is monitored. When the value of ceDiagHMTestThreshWindowSuite is 'default', the sliding history window is in number of test runs, with a window size the same as the value of this object. If ceDiagHMTestThreshWindowSuite and ceDiagHMTestThreshWindowSize are not supported, the failure count threshold will be the consecutive failure count threshold." ::= { ceDiagHMTestEntry 6 } ceDiagHMTestThreshWindowSuite OBJECT-TYPE SYNTAX INTEGER { default(1), milliseconds(2), seconds(3), minutes(4), hours(5), days(6), runs(7) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies a sliding history window parameter which is used in combination with ceDiagHMTestThreshold. When the specified failure count threshold is reached in this sliding history window, the diagnostic test result is set to failure. 'default' - The sliding history window is in number of test runs or executions, with a window size the same as ceDiagHMTestThreshold. 'milliseconds' - The sliding history window is in milli-seconds specified by ceDiagHMTestThreshWindowSize. 'seconds' - The sliding history window is in seconds specified by ceDiagHMTestThreshWindowSize. 'minutes' - The sliding history window is in minutes specified by ceDiagHMTestThreshWindowSize. 'hours' - The sliding history window is in hours specified by ceDiagHMTestThreshWindowSize. 'days' - The sliding history window is in days specified by ceDiagHMTestThreshWindowSize. 'runs' - The sliding history window is in number of test runs or executions specified by ceDiagHMTestThreshWindowSize. When the value of this object is 'default' the user cannot set any value for ceDiagHMTestThreshWindowSize. When the value of this object is not 'default', then the value of ceDiagHMTestThreshWindowSize cannot be zero (0)." ::= { ceDiagHMTestEntry 7 } ceDiagHMTestThreshWindowSize OBJECT-TYPE SYNTAX Gauge(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates the sliding history window size. When the value of ceDiagHMTestThreshWindowSuite is 'default', the user cannot set any value for this object. The value of zero (0) cannot be set." ::= { ceDiagHMTestEntry 8 } ceDiagEventLogSize OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the maximum number of entries which the event log buffer can contain." ::= { ceDiagEvents 1 } ceDiagEventCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the number of entries currently stored in the event log buffer." ::= { ceDiagEvents 2 } ceDiagEventMaxQueries OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of query entries allowed in the ceDiagEventQueryTable." ::= { ceDiagEvents 3 } ceDiagEventQueryTable OBJECT-TYPE SYNTAX SEQUENCE OF CeDiagEventQueryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A control table used to query the event log buffer. Each row instance in the table represents a query with its parameters. The resulting data for each instance of a query in this table is stored in the ceDiagEventResultTable. A row in this table can be created by setting the corresponding instance of ceDiagEventQueryStatus to 'createAndGo'. A row can be deleted by setting the corresponding instance of ceDiagEventQueryStatus to 'destroy'." ::= { ceDiagEvents 4 } ceDiagEventQueryEntry OBJECT-TYPE SYNTAX CeDiagEventQueryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A conceptual row of the ceDiagEventQueryTable used to setup a event log buffer query to search for diagnostic events. The actual search is started by when the value of ceDiagEventQueryStatus is set to 'active'." INDEX { ceDiagEventQueryIndex } ::= { ceDiagEventQueryTable 1 } CeDiagEventQueryEntry ::= SEQUENCE { ceDiagEventQueryIndex Gauge, ceDiagEventQueryPhysicalIndex EntPhysicalIndexOrZero, ceDiagEventQuerySeverity INTEGER, ceDiagEventQueryOwner SnmpAdminString, ceDiagEventQueryResultingRows INTEGER, ceDiagEventQueryStatus RowStatus } ceDiagEventQueryIndex OBJECT-TYPE SYNTAX Gauge ACCESS not-accessible STATUS mandatory DESCRIPTION "An arbitrary integer in the range of 1 to ceDiagEventMaxQueries to identify this control query." ::= { ceDiagEventQueryEntry 1 } ceDiagEventQueryPhysicalIndex OBJECT-TYPE SYNTAX EntPhysicalIndexOrZero -- Rsyntax INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the physical entity for the event log buffer query. A value of zero indicates that the query will return events of all physical entities." ::= { ceDiagEventQueryEntry 2 } ceDiagEventQuerySeverity OBJECT-TYPE SYNTAX INTEGER { --?? enum value of zero may cause problems -- all(0), info(1), warning(2), error(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the severity of the event log buffer query. A value of 'all' indicates that the search will return events of all severities." ::= { ceDiagEventQueryEntry 3 } ceDiagEventQueryOwner OBJECT-TYPE SYNTAX SnmpAdminString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The manager entity that configured this entry and is therefore using the resources assigned to it. It is used to model an administratively assigned name of the owner of a resource. It is recommended that this object have one or more the following information: IP address, management station name, network manager's name, location, or phone number." ::= { ceDiagEventQueryEntry 4 } ceDiagEventQueryResultingRows OBJECT-TYPE SYNTAX INTEGER(-1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The result status of the query. Possible values are: -1 - Either the query has not been initiated or the agent is busy processing this query instance. Time to completion of the query processing depends on the complexity of the query and the number of matches that satisfy this query. 0..2147483647 - The search has ended and this is the number of rows in the ceDiagEventResultTable, resulting from this query." ::= { ceDiagEventQueryEntry 5 } ceDiagEventQueryStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The status object used to manage rows in this table. When set to 'active', the query to search for diagnostic events is initiated. Once a row becomes active, values within the row cannot be modified, except by deleting and re-creating the row." ::= { ceDiagEventQueryEntry 6 } ceDiagEventResultTable OBJECT-TYPE SYNTAX SEQUENCE OF CeDiagEventResultEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing event log information corresponding to all the completed queries set up in ceDiagEventQueryTable. The query result will not become available until the current search is completed." ::= { ceDiagEvents 5 } ceDiagEventResultEntry OBJECT-TYPE SYNTAX CeDiagEventResultEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A conceptual row in ceDiagEventResultTable, containing information about an event that matches the search criteria set in the corresponding row of ceDiagEventQueryTable." INDEX { ceDiagEventQueryIndex, ceDiagEventResultIndex } ::= { ceDiagEventResultTable 1 } CeDiagEventResultEntry ::= SEQUENCE { ceDiagEventResultIndex Gauge, ceDiagEventResultPhysicalIndex PhysicalIndex, ceDiagEventResultPhysicalDescr SnmpAdminString, ceDiagEventResultTime DateAndTime, ceDiagEventResultSeverity INTEGER, ceDiagEventResultLogText SnmpAdminString } ceDiagEventResultIndex OBJECT-TYPE SYNTAX Gauge ACCESS not-accessible STATUS mandatory DESCRIPTION "A positive integer which uniquely identifies a result entry matching a particular query." ::= { ceDiagEventResultEntry 1 } ceDiagEventResultPhysicalIndex OBJECT-TYPE SYNTAX PhysicalIndex -- Rsyntax INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the physical entity corresponding to this event." ::= { ceDiagEventResultEntry 2 } ceDiagEventResultPhysicalDescr OBJECT-TYPE SYNTAX SnmpAdminString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies a textual description of physical entity corresponding to this event." ::= { ceDiagEventResultEntry 3 } ceDiagEventResultTime OBJECT-TYPE SYNTAX DateAndTime -- Rsyntax OCTET STRING(SIZE(8|11)) ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the time at which this event occurred." ::= { ceDiagEventResultEntry 4 } ceDiagEventResultSeverity OBJECT-TYPE SYNTAX INTEGER { info(1), warning(2), error(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the severity of this event." ::= { ceDiagEventResultEntry 5 } ceDiagEventResultLogText OBJECT-TYPE SYNTAX SnmpAdminString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The text message of this event." ::= { ceDiagEventResultEntry 6 } ceDiagEventErrorMsg OBJECT-TYPE SYNTAX SnmpAdminString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS not-accessible STATUS mandatory DESCRIPTION "The error message related to the notification." ::= { ceDiagEvents 6 } ceDiagEnableBootUpFailedNotif OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This variable specifies whether the system produces the ceDiagBootUpFailedNotif. A 'false' value will prevent ceDiagBootUpFailedNotif notifications from being generated by this system." ::= { ceDiagNotificationControl 1 } ceDiagEnableHMThreshReachedNotif OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This variable specifies whether the system produces the ceDiagHMThresholdReachedNotif. A 'false' value will prevent ceDiagHMThresholdReachedNotif notifications from being generated by this system." ::= { ceDiagNotificationControl 2 } ceDiagEnableHMTestRecoverNotif OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This variable specifies whether the system produces the ceDiagHMTestRecoverNotif. A 'false' value will prevent ceDiagHMTestRecoverNotif notifications from being generated by this system." ::= { ceDiagNotificationControl 3 } ceDiagEnableSchedTestFailedNotif OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This variable specifies whether the system produces the ceDiagScheduledTestFailedNotif. A 'false' value will prevent ceDiagScheduledTestFailedNotif notifications from being generated by this system." ::= { ceDiagNotificationControl 4 } ceDiagBootUpFailedNotif TRAP-TYPE -- Reverse mappable trap ENTERPRISE ciscoEntityDiagMIB VARIABLES { entPhysicalDescr, ceDiagEntityBootLevel, ceDiagEventErrorMsg } -- Status -- mandatory DESCRIPTION "A ceDiagBootUpFailedNotif is sent if the online diagnostic discovers a boot up failure for a physical entity." ::= 1 ceDiagHMThresholdReachedNotif TRAP-TYPE -- Reverse mappable trap ENTERPRISE ciscoEntityDiagMIB VARIABLES { entPhysicalDescr, ceDiagHMTestThreshold, ceDiagTestText, ceDiagTestAttributes } -- Status -- mandatory DESCRIPTION "A ceDiagHMThresholdReachedNotif is sent if the number of consecutive failure of a Health Monitoring test reaches the configured threshold." ::= 2 ceDiagHMTestRecoverNotif TRAP-TYPE -- Reverse mappable trap ENTERPRISE ciscoEntityDiagMIB VARIABLES { entPhysicalDescr, ceDiagTestText, ceDiagTestAttributes } -- Status -- mandatory DESCRIPTION "A ceDiagHMTestRecoverNotif is sent when no error is detected for the first time on the same Health Monitoring test which previously triggered ceDiagHMThresholdReachedNotif." ::= 3 ceDiagScheduledTestFailedNotif TRAP-TYPE -- Reverse mappable trap ENTERPRISE ciscoEntityDiagMIB VARIABLES { entPhysicalDescr, ceDiagTestText, ceDiagEventErrorMsg } -- Status -- mandatory DESCRIPTION "A ceDiagScheduledTestFailedNotif is sent if a scheduled test failed." ::= 4 ceDiagDescrGroup OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of managed objects that describe tests and errors -- supported by each physical entity. -- objects -- ceDiagTestText, ceDiagTestAttributes, -- ceDiagTestCustomAttributeDesc, ceDiagErrorText ceDiagGlobalConfigGroup OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of managed objects that describe global -- configuration of the online diagnostic feature. -- objects -- ceDiagBootupLevel ceDiagEntityGroup OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of managed objects that describe the state of a -- physical entity with respect ot the online diagnostic -- feature. -- objects -- ceDiagEntityBootLevel, ceDiagEntityCurrentTestMethod ceDiagEntityImageGroup OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBGroups 4 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of managed objects that describe the diagnostic -- image which the physical entity is running. -- objects -- ceDiagEntityImageAdminStatus, ceDiagEntityImageOperStatus, -- ceDiagEntityFieldDiagnosticUrl ceDiagOnDemandGroup OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBGroups 5 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of managed objects that describe the diagnostic -- on demand diagnostic jobs on the system. -- objects -- ceDiagOnDemandErrorAllowed, ceDiagOnDemandErrorAction, -- ceDiagOnDemandIterations, ceDiagOnDemandJobSuite, -- ceDiagOnDemandJobTestList, ceDiagOnDemandJobPortList, -- ceDiagOnDemandJobRowStatus ceDiagScheduledGroup OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBGroups 6 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of managed objects that describe the diagnostic -- on demand diagnostic jobs on the system. -- objects -- ceDiagScheduledJobType, ceDiagScheduledJobStart, -- ceDiagScheduledJobDayOfWeek, ceDiagScheduledJobTestList, -- ceDiagScheduledJobPortList, ceDiagScheduledJobRowStatus ceDiagTestPerfGroup OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBGroups 7 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of managed objects that describe the performance -- of tests supported by each physical entity. -- objects -- ceDiagTestPerfLastResult, ceDiagTestPerfLastErrorID, -- ceDiagTestPerfLastRun, ceDiagTestPerfFirstFail, -- ceDiagTestPerfLastSuccess, ceDiagTestPeffLastFail, -- ceDiagTestPerfTotalRuns, ceDiagTestPerfTotalFails, -- ceDiagTestPerfConsecutiveFails ceDiagHealthMonitorGroup OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBGroups 8 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of managed objects that describe tests and test -- configuration with relating to the health monitor. -- objects -- ceDiagHMSyslogEnabled, ceDiagHMTestEnabled, -- ceDiagHMTestIntervalMin, ceDiagHMTestInterval, -- ceDiagHMTestIntervalDefault, ceDiagHMTestThresholdDefault, -- ceDiagHMTestThreshold ceDiagEventGroup OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBGroups 9 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of managed objects that describe online -- diagnostic event history. -- objects -- ceDiagEventLogSize, ceDiagEventCount, ceDiagEventMaxQueries, -- ceDiagEventQueryPhysicalIndex, ceDiagEventQuerySeverity, -- ceDiagEventQueryOwner, ceDiagEventQueryResultingRows, -- ceDiagEventQueryStatus, ceDiagEventResultPhysicalIndex, -- ceDiagEventResultPhysicalDescr, ceDiagEventResultTime, -- ceDiagEventResultSeverity, ceDiagEventResultLogText ceDiagScheduledJobSuiteGroup OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBGroups 10 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of managed objects that describe the test suite information -- for a diagnostic scheduled job. -- objects -- ceDiagScheduledJobSuite ceDiagNotifControlGroup OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBGroups 11 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing enabling/disabling -- of the boot up failed, health monitoring, and -- scheduled job notifications for online diagnostics. -- objects -- ceDiagEnableBootUpFailedNotif, -- ceDiagEnableHMThreshReachedNotif, -- ceDiagEnableHMTestRecoverNotif, -- ceDiagEnableSchedTestFailedNotif ceDiagNotifErrorMsgGroup OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBGroups 12 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing error message used by -- various notifications. -- objects -- ceDiagEventErrorMsg ceDiagTestPerfLastTestMethodGroup OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBGroups 14 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of managed objects that describe the last testing method -- for a diagnostic test. -- objects -- ceDiagTestPerfLastTestMethod ceDiagHMTestThreshWindowGroup OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBGroups 15 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of managed objects that describe the sliding -- history window parameters for a Health Monitor diagnostic test. -- objects -- ceDiagHMTestThreshWindowSuite, ceDiagHMTestThreshWindowSize ceDiagNotificationGroup OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBGroups 13 } -- NOTIFICATION-GROUP -- Status -- mandatory -- Descr -- A collection of notifications providing for boot up failed, health -- monitoring, and scheduled job within online diagnostics. -- notifications -- ceDiagBootUpFailedNotif, ceDiagHMThresholdReachedNotif, -- ceDiagHMTestRecoverNotif, ceDiagScheduledTestFailedNotif ciscoEntityDiagMIBComplianceRev1 OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The compliance statement for SNMP entities that implement the -- CISCO-ENTITY-DIAG-MIB. Implementation of this MIB module is -- strongly recommended for any platform implementing the -- online diagnostic feature. -- Module -- >>current<< -- MandGroup -- ceDiagDescrGroup -- MandGroup -- ceDiagGlobalConfigGroup -- MandGroup -- ceDiagEntityGroup -- MandGroup -- ceDiagOnDemandGroup -- MandGroup -- ceDiagScheduledGroup -- MandGroup -- ceDiagTestPerfGroup -- MandGroup -- ceDiagEventGroup -- OptGroup -- ceDiagEntityImageGroup -- OptGroup -- ceDiagHealthMonitorGroup -- OptGroup -- ceDiagScheduledJobSuiteGroup ciscoEntityDiagMIBComplianceRev2 OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBCompliances 2 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The compliance statement for SNMP entities that implement the -- CISCO-ENTITY-DIAG-MIB. Implementation of this MIB module is -- strongly recommended for any platform implementing the -- online diagnostic feature. -- -- This statement is deprecated and superceded by -- ciscoEntityDiagMIBComplianceRev3. -- Module -- >>current<< -- MandGroup -- ceDiagDescrGroup -- MandGroup -- ceDiagGlobalConfigGroup -- MandGroup -- ceDiagEntityGroup -- MandGroup -- ceDiagOnDemandGroup -- MandGroup -- ceDiagScheduledGroup -- MandGroup -- ceDiagTestPerfGroup -- MandGroup -- ceDiagEventGroup -- OptGroup -- ceDiagEntityImageGroup -- OptGroup -- ceDiagHealthMonitorGroup -- OptGroup -- ceDiagScheduledJobSuiteGroup -- OptGroup -- ceDiagNotifControlGroup -- OptGroup -- ceDiagNotifErrorMsgGroup -- OptGroup -- ceDiagNotificationGroup ciscoEntityDiagMIBComplianceRev3 OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBCompliances 3 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The compliance statement for SNMP entities that implement the -- CISCO-ENTITY-DIAG-MIB. Implementation of this MIB module is -- strongly recommended for any platform implementing the -- online diagnostic feature. -- -- This statement is deprecated and superceded by -- ciscoEntityDiagMIBComplianceRev4. -- Module -- >>current<< -- MandGroup -- ceDiagDescrGroup -- MandGroup -- ceDiagGlobalConfigGroup -- MandGroup -- ceDiagEntityGroup -- MandGroup -- ceDiagOnDemandGroup -- MandGroup -- ceDiagScheduledGroup -- MandGroup -- ceDiagTestPerfGroup -- MandGroup -- ceDiagEventGroup -- OptGroup -- ceDiagEntityImageGroup -- OptGroup -- ceDiagHealthMonitorGroup -- OptGroup -- ceDiagScheduledJobSuiteGroup -- OptGroup -- ceDiagNotifControlGroup -- OptGroup -- ceDiagNotifErrorMsgGroup -- OptGroup -- ceDiagNotificationGroup -- OptGroup -- ceDiagTestPerfLastTestMethodGroup ciscoEntityDiagMIBComplianceRev4 OBJECT IDENTIFIER ::= { ciscoEntityDiagMIBCompliances 4 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for SNMP entities that implement the -- CISCO-ENTITY-DIAG-MIB. Implementation of this MIB module is -- strongly recommended for any platform implementing the -- online diagnostic feature. -- Module -- >>current<< -- MandGroup -- ceDiagDescrGroup -- MandGroup -- ceDiagGlobalConfigGroup -- MandGroup -- ceDiagEntityGroup -- MandGroup -- ceDiagOnDemandGroup -- MandGroup -- ceDiagScheduledGroup -- MandGroup -- ceDiagTestPerfGroup -- MandGroup -- ceDiagEventGroup -- OptGroup -- ceDiagEntityImageGroup -- OptGroup -- ceDiagHealthMonitorGroup -- OptGroup -- ceDiagScheduledJobSuiteGroup -- OptGroup -- ceDiagNotifControlGroup -- OptGroup -- ceDiagNotifErrorMsgGroup -- OptGroup -- ceDiagNotificationGroup -- OptGroup -- ceDiagTestPerfLastTestMethodGroup -- OptGroup -- ceDiagHMTestThreshWindowGroup -- ObjVar -- ceDiagBootupLevel -- ObjVar -- ceDiagEntityImageAdminStatus -- ObjVar -- ceDiagEntityFieldDiagnosticUrl -- ObjVar -- ceDiagOnDemandErrorAllowed -- ObjVar -- ceDiagOnDemandErrorAction -- ObjVar -- ceDiagOnDemandIterations -- ObjVar -- ceDiagOnDemandJobSuite -- ObjVar -- ceDiagOnDemandJobTestList -- ObjVar -- ceDiagOnDemandJobPortList -- ObjVar -- ceDiagOnDemandJobRowStatus -- ObjVar -- ceDiagScheduledJobType -- ObjVar -- ceDiagScheduledJobStart -- ObjVar -- ceDiagScheduledJobDayOfWeek -- ObjVar -- ceDiagScheduledJobTestList -- ObjVar -- ceDiagScheduledJobPortList -- ObjVar -- ceDiagScheduledJobRowStatus -- ObjVar -- ceDiagScheduledJobSuite -- ObjVar -- ceDiagHMSyslogEnabled -- ObjVar -- ceDiagHMTestEnabled -- ObjVar -- ceDiagHMTestInterval -- ObjVar -- ceDiagHMTestThreshold -- ObjVar -- ceDiagHMTestThreshWindowSuite -- ObjVar -- ceDiagHMTestThreshWindowSize -- ObjVar -- ceDiagEventLogSize -- ObjVar -- ceDiagEventQueryPhysicalIndex -- ObjVar -- ceDiagEventQuerySeverity -- ObjVar -- ceDiagEventQueryOwner -- ObjVar -- ceDiagEventQueryStatus -- ObjVar -- ceDiagEnableBootUpFailedNotif -- ObjVar -- ceDiagEnableHMThreshReachedNotif -- ObjVar -- ceDiagEnableHMTestRecoverNotif -- ObjVar -- ceDiagEnableSchedTestFailedNotif END